The fwnode_irq_get_byname() does return 0 upon device-tree IRQ mapping
failure. This is contradicting the function documentation and can
potentially be a source of errors like:
int probe(...) {
...
irq = fwnode_irq_get_byname();
if (irq <= 0)
return irq;
...
}
Here we do correctly check the return value from fwnode_irq_get_byname()
but the driver probe will now return success. (There was already one
such user in-tree).
Change the fwnode_irq_get_byname() to work as documented and according to
the common convention and abd always return a negative errno upon failure.
Fixes: ca0acb511c21 ("device property: Add fwnode_irq_get_byname")
Suggested-by: Sakari Ailus <[email protected]>
Signed-off-by: Matti Vaittinen <[email protected]>
Reviewed-by: Sakari Ailus <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
---
v1 => v2:
- change check if (!ret) => if (ret == 0), add comment.
- fix drop redundant empty line.
I did a quick audit for the callers at v6.1-rc2:
drivers/i2c/i2c-smbus.c
drivers/iio/accel/adxl355_core.c
drivers/iio/gyro/fxas21002c_core.c
drivers/iio/imu/adis16480.c
drivers/iio/imu/bmi160/bmi160_core.c
drivers/iio/imu/bmi160/bmi160_core.c
I did not spot any errors to be caused by this change. There will be a
functional change in i2c-smbus.c as the probe will now return -EINVAL
should the IRQ dt-mapping fail. It'd be nice if this was checked to be
Ok by the peeps knowing the i2c-smbus :)
---
drivers/base/property.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/base/property.c b/drivers/base/property.c
index 4d6278a84868..b4ccc64f7bd2 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -964,7 +964,7 @@ EXPORT_SYMBOL(fwnode_irq_get);
*/
int fwnode_irq_get_byname(const struct fwnode_handle *fwnode, const char *name)
{
- int index;
+ int index, ret;
if (!name)
return -EINVAL;
@@ -973,7 +973,12 @@ int fwnode_irq_get_byname(const struct fwnode_handle *fwnode, const char *name)
if (index < 0)
return index;
- return fwnode_irq_get(fwnode, index);
+ ret = fwnode_irq_get(fwnode, index);
+ /* We treat mapping errors as invalid case */
+ if (ret == 0)
+ return -EINVAL;
+
+ return ret;
}
EXPORT_SYMBOL(fwnode_irq_get_byname);
--
2.37.3
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
On Tue, Oct 25, 2022 at 06:11:49PM +0300, Matti Vaittinen wrote:
> The fwnode_irq_get_byname() does return 0 upon device-tree IRQ mapping
> failure. This is contradicting the function documentation and can
> potentially be a source of errors like:
>
> int probe(...) {
> ...
>
> irq = fwnode_irq_get_byname();
> if (irq <= 0)
> return irq;
>
> ...
> }
>
> Here we do correctly check the return value from fwnode_irq_get_byname()
> but the driver probe will now return success. (There was already one
> such user in-tree).
>
> Change the fwnode_irq_get_byname() to work as documented and according to
> the common convention and abd always return a negative errno upon failure.
and abd ?
...
> + ret = fwnode_irq_get(fwnode, index);
> + /* We treat mapping errors as invalid case */
> + if (ret == 0)
> + return -EINVAL;
> +
> + return ret;
This looks good.
--
With Best Regards,
Andy Shevchenko