This is the start of the stable review cycle for the 5.6.12 release.
There are 49 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun, 10 May 2020 12:29:44 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.12-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.6.12-rc1
Will Deacon <[email protected]>
mm/mremap: Add comment explaining the untagging behaviour of mremap()
Jiri Slaby <[email protected]>
cgroup, netclassid: remove double cond_resched
Thomas Pedersen <[email protected]>
mac80211: add ieee80211_is_any_nullfunc()
Rafael J. Wysocki <[email protected]>
ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()
Hans de Goede <[email protected]>
platform/x86: GPD pocket fan: Fix error message when temp-limits are out of range
Qian Cai <[email protected]>
x86/kvm: fix a missing-prototypes "vmread_error"
Takashi Iwai <[email protected]>
ALSA: hda: Match both PCI ID and SSID for driver blacklist
Aaron Ma <[email protected]>
drm/amdgpu: Fix oops when pp_funcs is unset in ACPI event
Jere Leppänen <[email protected]>
sctp: Fix SHUTDOWN CTSN Ack in the peer restart case
Andrii Nakryiko <[email protected]>
tools/runqslower: Ensure own vmlinux.h is picked up first
Doug Berger <[email protected]>
net: systemport: suppress warnings on failed Rx SKB allocations
Doug Berger <[email protected]>
net: bcmgenet: suppress warnings on failed Rx SKB allocations
Madhuparna Bhowmik <[email protected]>
mac80211: sta_info: Add lockdep condition for RCU list usage
Nathan Chancellor <[email protected]>
lib/mpi: Fix building for powerpc with clang
Russell King <[email protected]>
net: phy: bcm84881: clear settings on link down
Steven Rostedt (VMware) <[email protected]>
ftrace: Fix memory leak caused by not freeing entry in unregister_ftrace_direct()
Vamshi K Sthambamkadi <[email protected]>
tracing: Fix memory leaks in trace_events_hist.c
Paulo Alcantara <[email protected]>
cifs: do not share tcons with DFS
Jeremie Francois (on alpha) <[email protected]>
scripts/config: allow colons in option strings for sed
Ronnie Sahlberg <[email protected]>
cifs: protect updating server->dstaddr with a spinlock
Matthias Blankertz <[email protected]>
ASoC: rsnd: Fix "status check failed" spam for multi-SSI
Matthias Blankertz <[email protected]>
ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent
Julien Beraud <[email protected]>
net: stmmac: Fix sub-second increment
Julien Beraud <[email protected]>
net: stmmac: fix enabling socfpga's ptp_ref_clock
Xiyu Yang <[email protected]>
wimax/i2400m: Fix potential urb refcnt leak
Sandeep Raghuraman <[email protected]>
drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii)
Prike Liang <[email protected]>
drm/amd/powerplay: fix resume failed as smu table initialize early exit
Alex Elder <[email protected]>
remoteproc: qcom_q6v5_mss: fix a bug in q6v5_probe()
Amadeusz Sławiński <[email protected]>
ASoC: codecs: hdac_hdmi: Fix incorrect use of list_for_each_entry
Matthias Blankertz <[email protected]>
ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode
Matthias Blankertz <[email protected]>
ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode
Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Properly set maxpacket limit
Amadeusz Sławiński <[email protected]>
ASoC: topology: Fix endianness issue
Sebastian Reichel <[email protected]>
ASoC: sgtl5000: Fix VAG power-on handling
Wu Bo <[email protected]>
scsi: sg: add sg_remove_request in sg_write
Vasily Khoruzhick <[email protected]>
drm/bridge: anx6345: set correct BPC for display_info of connector
Tyler Hicks <[email protected]>
selftests/ipc: Fix test failure seen after initial test run
Jarkko Sakkinen <[email protected]>
Revert "Kernel selftests: tpm2: check for tpm support"
Sandipan Das <[email protected]>
selftests: vm: Fix 64-bit test builds for powerpc64le
Sandipan Das <[email protected]>
selftests: vm: Do not override definition of ARCH
Yihao Wu <[email protected]>
SUNRPC/cache: Fix unsafe traverse caused double-free in cache_purge
Amadeusz Sławiński <[email protected]>
ASoC: topology: Check return value of soc_tplg_dai_config
Amadeusz Sławiński <[email protected]>
ASoC: topology: Check return value of pcm_new_ver
Amadeusz Sławiński <[email protected]>
ASoC: topology: Check soc_tplg_add_route return value
Amadeusz Sławiński <[email protected]>
ASoC: topology: Check return value of soc_tplg_*_create
Amadeusz Sławiński <[email protected]>
ASoC: topology: Check return value of soc_tplg_create_tlv
Amadeusz Sławiński <[email protected]>
ASoC: topology: Add missing memory checks
Marek Szyprowski <[email protected]>
drm/bridge: analogix_dp: Split bind() into probe() and real bind()
Jia He <[email protected]>
vhost: vsock: kick send_pkt worker once device is started
-------------
Diffstat:
Makefile | 4 +-
arch/x86/kvm/vmx/ops.h | 1 +
drivers/acpi/sleep.c | 5 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 3 +-
.../gpu/drm/amd/powerplay/hwmgr/processpptables.c | 26 +++++
drivers/gpu/drm/amd/powerplay/renoir_ppt.c | 7 +-
drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 3 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 33 ++++--
drivers/gpu/drm/exynos/exynos_dp.c | 29 +++---
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 36 ++++---
drivers/net/ethernet/broadcom/bcmsysport.c | 3 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 +-
.../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 9 +-
.../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 12 ++-
drivers/net/phy/bcm84881.c | 6 +-
drivers/net/wimax/i2400m/usb-fw.c | 1 +
drivers/platform/x86/gpd-pocket-fan.c | 2 +-
drivers/remoteproc/qcom_q6v5_mss.c | 2 +-
drivers/scsi/sg.c | 4 +-
drivers/usb/dwc3/core.h | 4 +
drivers/usb/dwc3/gadget.c | 52 ++++++++--
drivers/vhost/vsock.c | 5 +
fs/cifs/connect.c | 6 ++
include/drm/bridge/analogix_dp.h | 5 +-
include/linux/ieee80211.h | 9 ++
kernel/trace/ftrace.c | 1 +
kernel/trace/trace_events_hist.c | 7 ++
lib/mpi/longlong.h | 34 +++---
mm/mremap.c | 10 ++
net/core/netclassid_cgroup.c | 4 +-
net/mac80211/mlme.c | 2 +-
net/mac80211/rx.c | 8 +-
net/mac80211/sta_info.c | 3 +-
net/mac80211/status.c | 5 +-
net/mac80211/tx.c | 2 +-
net/sctp/sm_make_chunk.c | 6 +-
net/sunrpc/cache.c | 5 +-
scripts/config | 5 +-
sound/pci/hda/hda_intel.c | 9 +-
sound/soc/codecs/hdac_hdmi.c | 6 +-
sound/soc/codecs/sgtl5000.c | 34 ++++++
sound/soc/codecs/sgtl5000.h | 1 +
sound/soc/sh/rcar/ssi.c | 11 +-
sound/soc/sh/rcar/ssiu.c | 2 +-
sound/soc/soc-topology.c | 115 ++++++++++++++++-----
tools/bpf/runqslower/Makefile | 2 +-
tools/testing/selftests/ipc/msgque.c | 2 +-
tools/testing/selftests/tpm2/test_smoke.sh | 13 +--
tools/testing/selftests/tpm2/test_space.sh | 9 +-
tools/testing/selftests/vm/Makefile | 4 +-
tools/testing/selftests/vm/run_vmtests | 2 +-
51 files changed, 402 insertions(+), 170 deletions(-)
From: Matthias Blankertz <[email protected]>
[ Upstream commit 54cb6221688660670a2e430892d7f4e6370263b8 ]
Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of
a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs
was harmless, but caused a "status check failed" message to be printed
for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for
all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the
EN bit for an SSI where it was not set by rsnd_ssi_start.
Signed-off-by: Matthias Blankertz <[email protected]>
Acked-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 9900a4f6f4e53..4a7d3413917fc 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -594,10 +594,16 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
* Capture: It might not receave data. Do nothing
*/
if (rsnd_io_is_play(io)) {
- rsnd_mod_write(mod, SSICR, cr | EN);
+ rsnd_mod_write(mod, SSICR, cr | ssi->cr_en);
rsnd_ssi_status_check(mod, DIRQ);
}
+ /* In multi-SSI mode, stop is performed by setting ssi0129 in
+ * SSI_CONTROL to 0 (in rsnd_ssio_stop_gen2). Do nothing here.
+ */
+ if (rsnd_ssi_multi_slaves_runtime(io))
+ return 0;
+
/*
* disable SSI,
* and, wait idle state
--
2.20.1
From: Julien Beraud <[email protected]>
[ Upstream commit 15ce30609d1e88d42fb1cd948f453e6d5f188249 ]
There are 2 registers to write to enable a ptp ref clock coming from the
fpga.
One that enables the usage of the clock from the fpga for emac0 and emac1
as a ptp ref clock, and the other to allow signals from the fpga to reach
emac0 and emac1.
Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII,
PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will
be written and the ptp ref clock will be set as coming from the fpga.
Separate the 2 register writes to only enable signals from the fpga to
reach emac0 or emac1 when ptp ref clock is not coming from the fpga.
Signed-off-by: Julien Beraud <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index fa32cd5b418ef..70d41783329dd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -291,16 +291,19 @@ static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
phymode == PHY_INTERFACE_MODE_MII ||
phymode == PHY_INTERFACE_MODE_GMII ||
phymode == PHY_INTERFACE_MODE_SGMII) {
- ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
&module);
module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2));
regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
module);
- } else {
- ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2));
}
+ if (dwmac->f2h_ptp_ref_clk)
+ ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
+ else
+ ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
+ (reg_shift / 2));
+
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
/* Deassert reset for the phy configuration to be sampled by
--
2.20.1
From: Wu Bo <[email protected]>
[ Upstream commit 83c6f2390040f188cc25b270b4befeb5628c1aee ]
If the __copy_from_user function failed we need to call sg_remove_request
in sg_write.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Douglas Gilbert <[email protected]>
Signed-off-by: Wu Bo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/sg.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 9c0ee192f0f9c..20472aaaf630a 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -685,8 +685,10 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
hp->flags = input_size; /* structure abuse ... */
hp->pack_id = old_hdr.pack_id;
hp->usr_ptr = NULL;
- if (copy_from_user(cmnd, buf, cmd_size))
+ if (copy_from_user(cmnd, buf, cmd_size)) {
+ sg_remove_request(sfp, srp);
return -EFAULT;
+ }
/*
* SG_DXFER_TO_FROM_DEV is functionally equivalent to SG_DXFER_FROM_DEV,
* but is is possible that the app intended SG_DXFER_TO_DEV, because there
--
2.20.1
From: Amadeusz Sławiński <[email protected]>
[ Upstream commit 482db55ae87f3749db05810a38b1d618dfd4407c ]
Function soc_tplg_create_tlv can fail, so we should check if it succeded
or not and proceed appropriately.
Signed-off-by: Amadeusz Sławiński <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-topology.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 7a7c427de95d6..5d974a36cdc92 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -894,7 +894,13 @@ static int soc_tplg_dmixer_create(struct soc_tplg *tplg, unsigned int count,
}
/* create any TLV data */
- soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+ err = soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+ if (err < 0) {
+ dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+ mc->hdr.name);
+ kfree(sm);
+ continue;
+ }
/* pass control to driver for optional further init */
err = soc_tplg_init_kcontrol(tplg, &kc,
@@ -1355,7 +1361,13 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_dmixer_create(
}
/* create any TLV data */
- soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+ err = soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+ if (err < 0) {
+ dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+ mc->hdr.name);
+ kfree(sm);
+ continue;
+ }
/* pass control to driver for optional further init */
err = soc_tplg_init_kcontrol(tplg, &kc[i],
--
2.20.1
From: Jere Leppänen <[email protected]>
commit 12dfd78e3a74825e6f0bc8df7ef9f938fbc6bfe3 upstream.
When starting shutdown in sctp_sf_do_dupcook_a(), get the value for
SHUTDOWN Cumulative TSN Ack from the new association, which is
reconstructed from the cookie, instead of the old association, which
the peer doesn't have anymore.
Otherwise the SHUTDOWN is either ignored or replied to with an ABORT
by the peer because CTSN Ack doesn't match the peer's Initial TSN.
Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.")
Signed-off-by: Jere Leppänen <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/sm_make_chunk.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -858,7 +858,11 @@ struct sctp_chunk *sctp_make_shutdown(co
struct sctp_chunk *retval;
__u32 ctsn;
- ctsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map);
+ if (chunk && chunk->asoc)
+ ctsn = sctp_tsnmap_get_ctsn(&chunk->asoc->peer.tsn_map);
+ else
+ ctsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map);
+
shut.cum_tsn_ack = htonl(ctsn);
retval = sctp_make_control(asoc, SCTP_CID_SHUTDOWN, 0,
From: Sebastian Reichel <[email protected]>
[ Upstream commit aa7812737f2877e192d57626cbe8825cc7cf6de9 ]
As mentioned slightly out of patch context in the code, there
is no reset routine for the chip. On boards where the chip is
supplied by a fixed regulator, it might not even be resetted
during (e.g. watchdog) reboot and can be in any state.
If the device is probed with VAG enabled, the driver's probe
routine will generate a loud pop sound when ANA_POWER is
being programmed. Avoid this by properly disabling just the
VAG bit and waiting the required power down time.
Signed-off-by: Sebastian Reichel <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/sgtl5000.c | 34 ++++++++++++++++++++++++++++++++++
sound/soc/codecs/sgtl5000.h | 1 +
2 files changed, 35 insertions(+)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index d5130193b4a2f..e8a8bf7b4ffed 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1653,6 +1653,40 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
dev_err(&client->dev,
"Error %d initializing CHIP_CLK_CTRL\n", ret);
+ /* Mute everything to avoid pop from the following power-up */
+ ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL,
+ SGTL5000_CHIP_ANA_CTRL_DEFAULT);
+ if (ret) {
+ dev_err(&client->dev,
+ "Error %d muting outputs via CHIP_ANA_CTRL\n", ret);
+ goto disable_clk;
+ }
+
+ /*
+ * If VAG is powered-on (e.g. from previous boot), it would be disabled
+ * by the write to ANA_POWER in later steps of the probe code. This
+ * may create a loud pop even with all outputs muted. The proper way
+ * to circumvent this is disabling the bit first and waiting the proper
+ * cool-down time.
+ */
+ ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value);
+ if (ret) {
+ dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret);
+ goto disable_clk;
+ }
+ if (value & SGTL5000_VAG_POWERUP) {
+ ret = regmap_update_bits(sgtl5000->regmap,
+ SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP,
+ 0);
+ if (ret) {
+ dev_err(&client->dev, "Error %d disabling VAG\n", ret);
+ goto disable_clk;
+ }
+
+ msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+ }
+
/* Follow section 2.2.1.1 of AN3663 */
ana_pwr = SGTL5000_ANA_POWER_DEFAULT;
if (sgtl5000->num_supplies <= VDDD) {
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index a4bf4bca95bf7..56ec5863f2507 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -233,6 +233,7 @@
/*
* SGTL5000_CHIP_ANA_CTRL
*/
+#define SGTL5000_CHIP_ANA_CTRL_DEFAULT 0x0133
#define SGTL5000_LINE_OUT_MUTE 0x0100
#define SGTL5000_HP_SEL_MASK 0x0040
#define SGTL5000_HP_SEL_SHIFT 6
--
2.20.1
From: Vasily Khoruzhick <[email protected]>
[ Upstream commit 1e8a6ce9186dbf342eebc07cf14cae5e82164e03 ]
Some drivers (e.g. sun4i-drm) need this info to decide whether they
need to enable dithering. Currently driver reports what panel supports
and if panel supports 8 we don't get dithering enabled.
Hardcode BPC to 6 for now since that's the only BPC
that driver supports.
Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support")
Signed-off-by: Vasily Khoruzhick <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Signed-off-by: Jernej Skrabec <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
index 526507102c1ea..8d32fea84c75e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
@@ -485,6 +485,9 @@ static int anx6345_get_modes(struct drm_connector *connector)
num_modes += drm_add_edid_modes(connector, anx6345->edid);
+ /* Driver currently supports only 6bpc */
+ connector->display_info.bpc = 6;
+
unlock:
if (power_off)
anx6345_poweroff(anx6345);
--
2.20.1
From: Doug Berger <[email protected]>
[ Upstream commit 3554e54a46125030c534820c297ed7f6c3907e24 ]
The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.
However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.
This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.
Signed-off-by: Doug Berger <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 15b31cddc054b..2e4b4188659a9 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -666,7 +666,8 @@ static struct sk_buff *bcm_sysport_rx_refill(struct bcm_sysport_priv *priv,
dma_addr_t mapping;
/* Allocate a new SKB for a new packet */
- skb = netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH);
+ skb = __netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH,
+ GFP_ATOMIC | __GFP_NOWARN);
if (!skb) {
priv->mib.alloc_rx_buff_failed++;
netif_err(priv, rx_err, ndev, "SKB alloc failed\n");
--
2.20.1
From: Sandipan Das <[email protected]>
[ Upstream commit 963e3e9c9a127013eb4d3c82eb997068b1adbb89 ]
Some tests are built only for 64-bit systems. This makes
sure that these tests are built for both big and little
endian variants of powerpc64.
Fixes: 7549b3364201 ("selftests: vm: Build/Run 64bit tests only on 64bit arch")
Reviewed-by: Kamalesh Babulal <[email protected]>
Signed-off-by: Sandipan Das <[email protected]>
Tested-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/vm/Makefile | 2 +-
tools/testing/selftests/vm/run_vmtests | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
index 3f2e2f0ccbc9a..8074340c6b3ab 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -19,7 +19,7 @@ TEST_GEN_FILES += thuge-gen
TEST_GEN_FILES += transhuge-stress
TEST_GEN_FILES += userfaultfd
-ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64))
+ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64))
TEST_GEN_FILES += va_128TBswitch
TEST_GEN_FILES += virtual_address_range
endif
diff --git a/tools/testing/selftests/vm/run_vmtests b/tools/testing/selftests/vm/run_vmtests
index f337148431980..6e137c9baa1e0 100755
--- a/tools/testing/selftests/vm/run_vmtests
+++ b/tools/testing/selftests/vm/run_vmtests
@@ -59,7 +59,7 @@ else
fi
#filter 64bit architectures
-ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64"
+ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
if [ -z $ARCH ]; then
ARCH=`uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/'`
fi
--
2.20.1
From: Alex Elder <[email protected]>
[ Upstream commit 13c060b50a341dd60303e5264d12108b5747f200 ]
If looking up the DT "firmware-name" property fails in q6v6_probe(),
the function returns without freeing the remoteproc structure
that has been allocated. Fix this by jumping to the free_rproc
label, which takes care of this.
Signed-off-by: Alex Elder <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/qcom_q6v5_mss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 0b1d737b0e97d..8844fc56c5f6d 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1607,7 +1607,7 @@ static int q6v5_probe(struct platform_device *pdev)
ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name",
1, &qproc->hexagon_mdt_image);
if (ret < 0 && ret != -EINVAL)
- return ret;
+ goto free_rproc;
platform_set_drvdata(pdev, qproc);
--
2.20.1
From: Rafael J. Wysocki <[email protected]>
commit 243a98894dc525ad2fbeb608722fcb682be3186d upstream.
Fix a comment in acpi_s2idle_prepare_late() that has become outdated
after commit f0ac20c3f613 ("ACPI: EC: Fix flushing of pending work").
Fixes: f0ac20c3f613 ("ACPI: EC: Fix flushing of pending work")
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/sleep.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -982,10 +982,7 @@ static int acpi_s2idle_prepare_late(void
static void acpi_s2idle_sync(void)
{
- /*
- * The EC driver uses the system workqueue and an additional special
- * one, so those need to be flushed too.
- */
+ /* The EC driver uses special workqueues that need to be flushed. */
acpi_ec_flush_work();
acpi_os_wait_events_complete(); /* synchronize Notify handling */
}
From: Will Deacon <[email protected]>
commit b2a84de2a2deb76a6a51609845341f508c518c03 upstream.
Commit dcde237319e6 ("mm: Avoid creating virtual address aliases in
brk()/mmap()/mremap()") changed mremap() so that only the 'old' address
is untagged, leaving the 'new' address in the form it was passed from
userspace. This prevents the unexpected creation of aliasing virtual
mappings in userspace, but looks a bit odd when you read the code.
Add a comment justifying the untagging behaviour in mremap().
Reported-by: Linus Torvalds <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mremap.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -606,6 +606,16 @@ SYSCALL_DEFINE5(mremap, unsigned long, a
LIST_HEAD(uf_unmap_early);
LIST_HEAD(uf_unmap);
+ /*
+ * There is a deliberate asymmetry here: we strip the pointer tag
+ * from the old address but leave the new address alone. This is
+ * for consistency with mmap(), where we prevent the creation of
+ * aliasing mappings in userspace by leaving the tag bits of the
+ * mapping address intact. A non-zero tag will cause the subsequent
+ * range checks to reject the address as invalid.
+ *
+ * See Documentation/arm64/tagged-address-abi.rst for more information.
+ */
addr = untagged_addr(addr);
if (flags & ~(MREMAP_FIXED | MREMAP_MAYMOVE))
From: Matthias Blankertz <[email protected]>
[ Upstream commit 0c258657ddfe81b4fc0183378d800c97ba0b7cdd ]
The master SSI of a multi-SSI setup was attached both to the
RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream.
This is not correct wrt. the meaning of being "parent" in the rest of
the SSI code, where it seems to indicate an SSI that provides clock and
word sync but is not transmitting/receiving audio data.
Not treating the multi-SSI master as parent allows removal of various
special cases to the rsnd_ssi_is_parent conditions introduced in commit
a09fb3f28a60 ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode").
It also fixes the issue that operations performed via rsnd_dai_call()
were performed twice for the master SSI. This caused some "status check
failed" spam when stopping a multi-SSI stream as the driver attempted to
stop the master SSI twice.
Signed-off-by: Matthias Blankertz <[email protected]>
Acked-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index d51fb3a394486..9900a4f6f4e53 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -407,7 +407,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod,
* We shouldn't exchange SWSP after running.
* This means, parent needs to care it.
*/
- if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+ if (rsnd_ssi_is_parent(mod, io))
goto init_end;
if (rsnd_io_is_play(io))
@@ -559,7 +559,7 @@ static int rsnd_ssi_start(struct rsnd_mod *mod,
* EN is for data output.
* SSI parent EN is not needed.
*/
- if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+ if (rsnd_ssi_is_parent(mod, io))
return 0;
ssi->cr_en = EN;
@@ -582,7 +582,7 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
if (!rsnd_ssi_is_run_mods(mod, io))
return 0;
- if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+ if (rsnd_ssi_is_parent(mod, io))
return 0;
cr = ssi->cr_own |
@@ -620,7 +620,7 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod,
if (rsnd_is_gen1(priv))
return 0;
- if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+ if (rsnd_ssi_is_parent(mod, io))
return 0;
if (!rsnd_ssi_is_run_mods(mod, io))
@@ -737,6 +737,9 @@ static void rsnd_ssi_parent_attach(struct rsnd_mod *mod,
if (!rsnd_rdai_is_clk_master(rdai))
return;
+ if (rsnd_ssi_is_multi_slave(mod, io))
+ return;
+
switch (rsnd_mod_id(mod)) {
case 1:
case 2:
--
2.20.1
From: Madhuparna Bhowmik <[email protected]>
[ Upstream commit 8ca47eb9f9e4e10e7e7fa695731a88941732c38d ]
The function sta_info_get_by_idx() uses RCU list primitive.
It is called with local->sta_mtx held from mac80211/cfg.c.
Add lockdep expression to avoid any false positive RCU list warnings.
Signed-off-by: Madhuparna Bhowmik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/sta_info.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index e3572be307d6c..149ed0510778d 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -231,7 +231,8 @@ struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta;
int i = 0;
- list_for_each_entry_rcu(sta, &local->sta_list, list) {
+ list_for_each_entry_rcu(sta, &local->sta_list, list,
+ lockdep_is_held(&local->sta_mtx)) {
if (sdata != sta->sdata)
continue;
if (i < idx) {
--
2.20.1
From: Amadeusz Sławiński <[email protected]>
[ Upstream commit 6856e887eae3efc0fe56899cb3f969fe063171c5 ]
Function soc_tplg_add_route can propagate error code from callback, we
should check its return value and handle fail in correct way.
Signed-off-by: Amadeusz Sławiński <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-topology.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index c86c3ea533f68..aa7714f2b78fd 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1284,7 +1284,9 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
routes[i]->dobj.index = tplg->index;
list_add(&routes[i]->dobj.list, &tplg->comp->dobj_list);
- soc_tplg_add_route(tplg, routes[i]);
+ ret = soc_tplg_add_route(tplg, routes[i]);
+ if (ret < 0)
+ break;
/* add route, but keep going if some fail */
snd_soc_dapm_add_routes(dapm, routes[i], 1);
--
2.20.1
From: Marek Szyprowski <[email protected]>
[ Upstream commit 83a196773b8bc6702f49df1eddc848180e350340 ]
Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.
Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.
This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm])
exynos-dp 145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517
exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
...
Signed-off-by: Marek Szyprowski <[email protected]>
Acked-by: Andy Yan <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Signed-off-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../drm/bridge/analogix/analogix_dp_core.c | 33 +++++++++++------
drivers/gpu/drm/exynos/exynos_dp.c | 29 ++++++++-------
.../gpu/drm/rockchip/analogix_dp-rockchip.c | 36 ++++++++++---------
include/drm/bridge/analogix_dp.h | 5 +--
4 files changed, 61 insertions(+), 42 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 6effe532f8200..461eff94d2767 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1636,8 +1636,7 @@ static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
}
struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
- struct analogix_dp_plat_data *plat_data)
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
{
struct platform_device *pdev = to_platform_device(dev);
struct analogix_dp_device *dp;
@@ -1740,22 +1739,30 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
irq_flags, "analogix-dp", dp);
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
- goto err_disable_pm_runtime;
+ return ERR_PTR(ret);
}
disable_irq(dp->irq);
+ return dp;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_probe);
+
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
+{
+ int ret;
+
dp->drm_dev = drm_dev;
dp->encoder = dp->plat_data->encoder;
dp->aux.name = "DP-AUX";
dp->aux.transfer = analogix_dpaux_transfer;
- dp->aux.dev = &pdev->dev;
+ dp->aux.dev = dp->dev;
ret = drm_dp_aux_register(&dp->aux);
if (ret)
- return ERR_PTR(ret);
+ return ret;
- pm_runtime_enable(dev);
+ pm_runtime_enable(dp->dev);
ret = analogix_dp_create_bridge(drm_dev, dp);
if (ret) {
@@ -1763,13 +1770,12 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
goto err_disable_pm_runtime;
}
- return dp;
+ return 0;
err_disable_pm_runtime:
+ pm_runtime_disable(dp->dev);
- pm_runtime_disable(dev);
-
- return ERR_PTR(ret);
+ return ret;
}
EXPORT_SYMBOL_GPL(analogix_dp_bind);
@@ -1786,10 +1792,15 @@ void analogix_dp_unbind(struct analogix_dp_device *dp)
drm_dp_aux_unregister(&dp->aux);
pm_runtime_disable(dp->dev);
- clk_disable_unprepare(dp->clock);
}
EXPORT_SYMBOL_GPL(analogix_dp_unbind);
+void analogix_dp_remove(struct analogix_dp_device *dp)
+{
+ clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_remove);
+
#ifdef CONFIG_PM
int analogix_dp_suspend(struct analogix_dp_device *dp)
{
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 4785885c0f4f9..065a1cb2a5444 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -158,15 +158,8 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
struct drm_device *drm_dev = data;
int ret;
- dp->dev = dev;
dp->drm_dev = drm_dev;
- dp->plat_data.dev_type = EXYNOS_DP;
- dp->plat_data.power_on_start = exynos_dp_poweron;
- dp->plat_data.power_off = exynos_dp_poweroff;
- dp->plat_data.attach = exynos_dp_bridge_attach;
- dp->plat_data.get_modes = exynos_dp_get_modes;
-
if (!dp->plat_data.panel && !dp->ptn_bridge) {
ret = exynos_dp_dt_parse_panel(dp);
if (ret)
@@ -184,13 +177,11 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
dp->plat_data.encoder = encoder;
- dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
- if (IS_ERR(dp->adp)) {
+ ret = analogix_dp_bind(dp->adp, dp->drm_dev);
+ if (ret)
dp->encoder.funcs->destroy(&dp->encoder);
- return PTR_ERR(dp->adp);
- }
- return 0;
+ return ret;
}
static void exynos_dp_unbind(struct device *dev, struct device *master,
@@ -221,6 +212,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
if (!dp)
return -ENOMEM;
+ dp->dev = dev;
/*
* We just use the drvdata until driver run into component
* add function, and then we would set drvdata to null, so
@@ -246,16 +238,29 @@ static int exynos_dp_probe(struct platform_device *pdev)
/* The remote port can be either a panel or a bridge */
dp->plat_data.panel = panel;
+ dp->plat_data.dev_type = EXYNOS_DP;
+ dp->plat_data.power_on_start = exynos_dp_poweron;
+ dp->plat_data.power_off = exynos_dp_poweroff;
+ dp->plat_data.attach = exynos_dp_bridge_attach;
+ dp->plat_data.get_modes = exynos_dp_get_modes;
dp->plat_data.skip_connector = !!bridge;
+
dp->ptn_bridge = bridge;
out:
+ dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+ if (IS_ERR(dp->adp))
+ return PTR_ERR(dp->adp);
+
return component_add(&pdev->dev, &exynos_dp_ops);
}
static int exynos_dp_remove(struct platform_device *pdev)
{
+ struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
component_del(&pdev->dev, &exynos_dp_ops);
+ analogix_dp_remove(dp->adp);
return 0;
}
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index f38f5e113c6b3..ce98c08aa8b44 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -325,15 +325,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
void *data)
{
struct rockchip_dp_device *dp = dev_get_drvdata(dev);
- const struct rockchip_dp_chip_data *dp_data;
struct drm_device *drm_dev = data;
int ret;
- dp_data = of_device_get_match_data(dev);
- if (!dp_data)
- return -ENODEV;
-
- dp->data = dp_data;
dp->drm_dev = drm_dev;
ret = rockchip_dp_drm_create_encoder(dp);
@@ -344,16 +338,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
dp->plat_data.encoder = &dp->encoder;
- dp->plat_data.dev_type = dp->data->chip_type;
- dp->plat_data.power_on_start = rockchip_dp_poweron_start;
- dp->plat_data.power_off = rockchip_dp_powerdown;
- dp->plat_data.get_modes = rockchip_dp_get_modes;
-
- dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
- if (IS_ERR(dp->adp)) {
- ret = PTR_ERR(dp->adp);
+ ret = analogix_dp_bind(dp->adp, drm_dev);
+ if (ret)
goto err_cleanup_encoder;
- }
return 0;
err_cleanup_encoder:
@@ -368,8 +355,6 @@ static void rockchip_dp_unbind(struct device *dev, struct device *master,
analogix_dp_unbind(dp->adp);
dp->encoder.funcs->destroy(&dp->encoder);
-
- dp->adp = ERR_PTR(-ENODEV);
}
static const struct component_ops rockchip_dp_component_ops = {
@@ -380,10 +365,15 @@ static const struct component_ops rockchip_dp_component_ops = {
static int rockchip_dp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ const struct rockchip_dp_chip_data *dp_data;
struct drm_panel *panel = NULL;
struct rockchip_dp_device *dp;
int ret;
+ dp_data = of_device_get_match_data(dev);
+ if (!dp_data)
+ return -ENODEV;
+
ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
if (ret < 0)
return ret;
@@ -394,7 +384,12 @@ static int rockchip_dp_probe(struct platform_device *pdev)
dp->dev = dev;
dp->adp = ERR_PTR(-ENODEV);
+ dp->data = dp_data;
dp->plat_data.panel = panel;
+ dp->plat_data.dev_type = dp->data->chip_type;
+ dp->plat_data.power_on_start = rockchip_dp_poweron_start;
+ dp->plat_data.power_off = rockchip_dp_powerdown;
+ dp->plat_data.get_modes = rockchip_dp_get_modes;
ret = rockchip_dp_of_probe(dp);
if (ret < 0)
@@ -402,12 +397,19 @@ static int rockchip_dp_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dp);
+ dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+ if (IS_ERR(dp->adp))
+ return PTR_ERR(dp->adp);
+
return component_add(dev, &rockchip_dp_component_ops);
}
static int rockchip_dp_remove(struct platform_device *pdev)
{
+ struct rockchip_dp_device *dp = platform_get_drvdata(pdev);
+
component_del(&pdev->dev, &rockchip_dp_component_ops);
+ analogix_dp_remove(dp->adp);
return 0;
}
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 7aa2f93da49ca..b0dcc07334a1e 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -42,9 +42,10 @@ int analogix_dp_resume(struct analogix_dp_device *dp);
int analogix_dp_suspend(struct analogix_dp_device *dp);
struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
- struct analogix_dp_plat_data *plat_data);
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data);
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev);
void analogix_dp_unbind(struct analogix_dp_device *dp);
+void analogix_dp_remove(struct analogix_dp_device *dp);
int analogix_dp_start_crc(struct drm_connector *connector);
int analogix_dp_stop_crc(struct drm_connector *connector);
--
2.20.1
From: Ronnie Sahlberg <[email protected]>
[ Upstream commit fada37f6f62995cc449b36ebba1220594bfe55fe ]
We use a spinlock while we are reading and accessing the destination address for a server.
We need to also use this spinlock to protect when we are modifying this address from
reconn_set_ipaddr().
Signed-off-by: Ronnie Sahlberg <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/connect.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 4804d1df8c1cf..d4a23b48e24d8 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -375,8 +375,10 @@ static int reconn_set_ipaddr(struct TCP_Server_Info *server)
return rc;
}
+ spin_lock(&cifs_tcp_ses_lock);
rc = cifs_convert_address((struct sockaddr *)&server->dstaddr, ipaddr,
strlen(ipaddr));
+ spin_unlock(&cifs_tcp_ses_lock);
kfree(ipaddr);
return !rc ? -1 : 0;
--
2.20.1
From: Vamshi K Sthambamkadi <[email protected]>
[ Upstream commit 9da73974eb9c965dd9989befb593b8c8da9e4bdc ]
kmemleak report 1:
[<9092c50b>] kmem_cache_alloc_trace+0x138/0x270
[<05a2c9ed>] create_field_var+0xcf/0x180
[<528a2d68>] action_create+0xe2/0xc80
[<63f50b61>] event_hist_trigger_func+0x15b5/0x1920
[<28ea5d3d>] trigger_process_regex+0x7b/0xc0
[<3138e86f>] event_trigger_write+0x4d/0xb0
[<ffd66c19>] __vfs_write+0x30/0x200
[<4f424a0d>] vfs_write+0x96/0x1b0
[<da59a290>] ksys_write+0x53/0xc0
[<3717101a>] __ia32_sys_write+0x15/0x20
[<c5f23497>] do_fast_syscall_32+0x70/0x250
[<46e2629c>] entry_SYSENTER_32+0xaf/0x102
This is because save_vars[] of struct hist_trigger_data are
not destroyed
kmemleak report 2:
[<9092c50b>] kmem_cache_alloc_trace+0x138/0x270
[<6e5e97c5>] create_var+0x3c/0x110
[<de82f1b9>] create_field_var+0xaf/0x180
[<528a2d68>] action_create+0xe2/0xc80
[<63f50b61>] event_hist_trigger_func+0x15b5/0x1920
[<28ea5d3d>] trigger_process_regex+0x7b/0xc0
[<3138e86f>] event_trigger_write+0x4d/0xb0
[<ffd66c19>] __vfs_write+0x30/0x200
[<4f424a0d>] vfs_write+0x96/0x1b0
[<da59a290>] ksys_write+0x53/0xc0
[<3717101a>] __ia32_sys_write+0x15/0x20
[<c5f23497>] do_fast_syscall_32+0x70/0x250
[<46e2629c>] entry_SYSENTER_32+0xaf/0x102
struct hist_field allocated through create_var() do not initialize
"ref" field to 1. The code in __destroy_hist_field() does not destroy
object if "ref" is initialized to zero, the condition
if (--hist_field->ref > 1) always passes since unsigned int wraps.
kmemleak report 3:
[<f8666fcc>] __kmalloc_track_caller+0x139/0x2b0
[<bb7f80a5>] kstrdup+0x27/0x50
[<39d70006>] init_var_ref+0x58/0xd0
[<8ca76370>] create_var_ref+0x89/0xe0
[<f045fc39>] action_create+0x38f/0xc80
[<7c146821>] event_hist_trigger_func+0x15b5/0x1920
[<07de3f61>] trigger_process_regex+0x7b/0xc0
[<e87daf8f>] event_trigger_write+0x4d/0xb0
[<19bf1512>] __vfs_write+0x30/0x200
[<64ce4d27>] vfs_write+0x96/0x1b0
[<a6f34170>] ksys_write+0x53/0xc0
[<7d4230cd>] __ia32_sys_write+0x15/0x20
[<8eadca00>] do_fast_syscall_32+0x70/0x250
[<235cf985>] entry_SYSENTER_32+0xaf/0x102
hist_fields (system & event_name) are not freed
Link: http://lkml.kernel.org/r/20200422061503.GA5151@cosmos
Signed-off-by: Vamshi K Sthambamkadi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace_events_hist.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index 5f6834a2bf411..fcab11cc6833b 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -3320,6 +3320,9 @@ static void __destroy_hist_field(struct hist_field *hist_field)
kfree(hist_field->name);
kfree(hist_field->type);
+ kfree(hist_field->system);
+ kfree(hist_field->event_name);
+
kfree(hist_field);
}
@@ -4382,6 +4385,7 @@ static struct hist_field *create_var(struct hist_trigger_data *hist_data,
goto out;
}
+ var->ref = 1;
var->flags = HIST_FIELD_FL_VAR;
var->var.idx = idx;
var->var.hist_data = var->hist_data = hist_data;
@@ -5011,6 +5015,9 @@ static void destroy_field_vars(struct hist_trigger_data *hist_data)
for (i = 0; i < hist_data->n_field_vars; i++)
destroy_field_var(hist_data->field_vars[i]);
+
+ for (i = 0; i < hist_data->n_save_vars; i++)
+ destroy_field_var(hist_data->save_vars[i]);
}
static void save_field_var(struct hist_trigger_data *hist_data,
--
2.20.1
On 5/8/20 5:35 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.6.12 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 10 May 2020 12:29:44 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 430 pass: 430 fail: 0
Guenter
On 5/8/20 6:35 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.6.12 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 10 May 2020 12:29:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.12-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Fri, 8 May 2020 at 18:25, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.6.12 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 10 May 2020 12:29:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.12-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 5.6.12-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.6.y
git commit: 27749cf494a88f40047cf4c13a13536a41b454ed
git describe: v5.6.11-50-g27749cf494a8
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.6-oe/build/v5.6.11-50-g27749cf494a8
No regressions (compared to build v5.6.11)
No fixes (compared to build v5.6.11)
Ran 30848 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-commands-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance
* ltp-containers-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* kselftest/net
* kselftest/networking
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-fs-tests
* ltp-open-posix-tests
* ltp-sched-tests
* network-basic-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-native/networking
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kselftest-vsyscall-mode-none/networking
--
Linaro LKFT
https://lkft.linaro.org
On Sat, May 09, 2020 at 01:15:48PM +0530, Naresh Kamboju wrote:
> On Fri, 8 May 2020 at 18:25, Greg Kroah-Hartman
> <[email protected]> wrote:
> >
> > This is the start of the stable review cycle for the 5.6.12 release.
> > There are 49 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun, 10 May 2020 12:29:44 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.12-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
Thanks for testing all of these and letting me know.
greg k-h