On 06/28/2016 03:44 PM, Andreas Werner wrote:
> This CAN Controller is found on MEN Chameleon FPGAs.
>
> The driver/device supports the CAN2.0 specification.
> There are 255 RX and 255 Tx buffer within the IP. The
> pointer for the buffer are handled by HW to make the
> access from within the driver as simple as possible.
>
> The driver also supports parameters to configure the
> buffer level interrupt for RX/TX as well as a RX timeout
> interrupt.
>
> With this configuration options, the driver/device
> provides flexibility for different types of usecases.
Please implement LED support, see commit:
adccadb92f05 can: flexcan: add LED trigger support
Please add proper IFF_ECHO support, on xmit call can_put_echo_skb() on
tx-complete interrupt can_get_echo_skb().
See inline for more comments.
>
> Signed-off-by: Andreas Werner <[email protected]>
> ---
> drivers/net/can/Kconfig | 10 +
> drivers/net/can/Makefile | 1 +
> drivers/net/can/men_z192_can.c | 990 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1001 insertions(+)
> create mode 100644 drivers/net/can/men_z192_can.c
>
> diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
> index 0d40aef..0fa0387 100644
> --- a/drivers/net/can/Kconfig
> +++ b/drivers/net/can/Kconfig
> @@ -104,6 +104,16 @@ config CAN_JANZ_ICAN3
> This driver can also be built as a module. If so, the module will be
> called janz-ican3.ko.
>
> +config CAN_MEN_Z192
> + tristate "MEN 16Z192-00 CAN Controller"
> + depends on MCB
> + ---help---
> + Driver for MEN 16Z192-00 CAN Controller IP-Core, which
> + is connected to the MEN Chameleon Bus.
> +
> + This driver can also be built as a module. If so, the module will be
> + called men_z192_can.ko.
> +
> config CAN_RCAR
> tristate "Renesas R-Car CAN controller"
> depends on ARCH_RENESAS || ARM
> diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
> index e3db0c8..eb206b3 100644
> --- a/drivers/net/can/Makefile
> +++ b/drivers/net/can/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_CAN_FLEXCAN) += flexcan.o
> obj-$(CONFIG_CAN_GRCAN) += grcan.o
> obj-$(CONFIG_CAN_IFI_CANFD) += ifi_canfd/
> obj-$(CONFIG_CAN_JANZ_ICAN3) += janz-ican3.o
> +obj-$(CONFIG_CAN_MEN_Z192) += men_z192_can.o
> obj-$(CONFIG_CAN_MSCAN) += mscan/
> obj-$(CONFIG_CAN_M_CAN) += m_can/
> obj-$(CONFIG_CAN_RCAR) += rcar_can.o
> diff --git a/drivers/net/can/men_z192_can.c b/drivers/net/can/men_z192_can.c
> new file mode 100644
> index 0000000..d3acc2e
> --- /dev/null
> +++ b/drivers/net/can/men_z192_can.c
> @@ -0,0 +1,990 @@
> +/*
> + * MEN 16Z192 CAN Controller driver
> + *
> + * Copyright (C) 2016 MEN Mikroelektronik GmbH (http://www.men.de)
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the Free
> + * Software Foundation; version 2 of the License.
> + */
> +
> +#include <linux/netdevice.h>
> +#include <linux/can/error.h>
> +#include <linux/can/dev.h>
> +#include <linux/bitops.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/mcb.h>
> +#include <linux/can.h>
> +#include <linux/io.h>
> +
> +#define DRV_NAME "z192_can"
> +
please use a single space after the macro definition
> +#define MEN_Z192_NAPI_WEIGHT 64
> +#define MEN_Z192_MODE_TOUT_US 40
> +
> +/* CTL/BTR Register Bits */
> +#define MEN_Z192_CTL0_INITRQ BIT(0)
> +#define MEN_Z192_CTL0_SLPRQ BIT(1)
> +#define MEN_Z192_CTL1_INITAK BIT(8)
> +#define MEN_Z192_CTL1_SLPAK BIT(9)
> +#define MEN_Z192_CTL1_LISTEN BIT(12)
> +#define MEN_Z192_CTL1_LOOPB BIT(13)
> +#define MEN_Z192_CTL1_CANE BIT(15)
> +#define MEN_Z192_BTR0_BRP(x) (((x) & 0x3f) << 16)
> +#define MEN_Z192_BTR0_SJW(x) (((x) & 0x03) << 22)
> +#define MEN_Z192_BTR1_TSEG1(x) (((x) & 0x0f) << 24)
> +#define MEN_Z192_BTR1_TSEG2(x) (((x) & 0x07) << 28)
> +#define MEN_Z192_BTR1_SAMP BIT(31)
> +
> +/* IER Interrupt Enable Register bits */
> +#define MEN_Z192_RXIE BIT(0)
> +#define MEN_Z192_OVRIE BIT(1)
> +#define MEN_Z192_CSCIE BIT(6)
> +#define MEN_Z192_TOUTE BIT(7)
> +#define MEN_Z192_TXIE BIT(16)
> +#define MEN_Z192_ERRIE BIT(17)
> +
> +#define MEN_Z192_IRQ_ALL \
> + (MEN_Z192_RXIE | MEN_Z192_OVRIE | \
> + MEN_Z192_CSCIE | MEN_Z192_TOUTE | \
> + MEN_Z192_TXIE)
> +
> +#define MEN_Z192_IRQ_NAPI (MEN_Z192_RXIE | MEN_Z192_TOUTE)
> +
> +/* RX_TX_STAT RX/TX Status status register bits */
> +#define MEN_Z192_RX_BUF_CNT(x) ((x) & 0xff)
> +#define MEN_Z192_TX_BUF_CNT(x) (((x) & 0xff00) >> 8)
> +#define MEN_Z192_RFLG_RXIF BIT(16)
> +#define MEN_Z192_RFLG_OVRF BIT(17)
> +#define MEN_Z192_RFLG_TSTATE GENMASK(19, 18)
> +#define MEN_Z192_RFLG_RSTATE GENMASK(21, 20)
> +#define MEN_Z192_RFLG_CSCIF BIT(22)
> +#define MEN_Z192_RFLG_TOUTF BIT(23)
> +#define MEN_Z192_TFLG_TXIF BIT(24)
> +
> +#define MEN_Z192_GET_TSTATE(x) (((x) & MEN_Z192_RFLG_TSTATE) >> 18)
> +#define MEN_Z192_GET_RSTATE(x) (((x) & MEN_Z192_RFLG_RSTATE) >> 20)
> +
> +#define MEN_Z192_IRQ_FLAGS_ALL \
> + (MEN_Z192_RFLG_RXIF | MEN_Z192_RFLG_OVRF | \
> + MEN_Z192_RFLG_TSTATE | MEN_Z192_RFLG_RSTATE | \
> + MEN_Z192_RFLG_CSCIF | MEN_Z192_RFLG_TOUTF | \
> + MEN_Z192_TFLG_TXIF)
> +
> +/* RX/TX Error counter bits */
> +#define MEN_Z192_GET_RX_ERR_CNT(x) ((x) & 0xff)
> +#define MEN_Z192_GET_TX_ERR_CNT(x) (((x) & 0x00ff0000) >> 16)
> +
> +/* Buffer level register bits */
> +#define MEN_Z192_RX_BUF_LVL GENMASK(15, 0)
> +#define MEN_Z192_TX_BUF_LVL GENMASK(31, 16)
> +
> +/* RX/TX Buffer register bits */
> +#define MEN_Z192_CFBUF_LEN GENMASK(3, 0)
> +#define MEN_Z192_CFBUF_ID1 GENMASK(31, 21)
> +#define MEN_Z192_CFBUF_ID2 GENMASK(18, 1)
> +#define MEN_Z192_CFBUF_TS GENMASK(31, 8)
> +#define MEN_Z192_CFBUF_E_RTR BIT(0)
> +#define MEN_Z192_CFBUF_IDE BIT(19)
> +#define MEN_Z192_CFBUF_SRR BIT(20)
> +#define MEN_Z192_CFBUF_S_RTR BIT(20)
> +#define MEN_Z192_CFBUF_ID2_SHIFT 1
> +#define MEN_Z192_CFBUF_ID1_SHIFT 21
> +
> +/* Global register offsets */
> +#define MEN_Z192_RX_BUF_START 0x0000
> +#define MEN_Z192_TX_BUF_START 0x1000
> +#define MEN_Z192_REGS_OFFS 0x2000
> +
> +/* Buffer level control values */
> +#define MEN_Z192_MIN_BUF_LVL 0
> +#define MEN_Z192_MAX_BUF_LVL 254
> +#define MEN_Z192_RX_BUF_LVL_DEF 5
> +#define MEN_Z192_TX_BUF_LVL_DEF 5
> +#define MEN_Z192_RX_TOUT_MIN 0
> +#define MEN_Z192_RX_TOUT_MAX 65535
> +#define MEN_Z192_RX_TOUT_DEF 1000
> +
> +static int txlvl = MEN_Z192_TX_BUF_LVL_DEF;
> +module_param(txlvl, int, S_IRUGO);
> +MODULE_PARM_DESC(txlvl, "TX IRQ trigger level (in frames) 0-254, default="
> + __MODULE_STRING(MEN_Z192_TX_BUF_LVL_DEF) ")");
> +
> +static int rxlvl = MEN_Z192_RX_BUF_LVL_DEF;
> +module_param(rxlvl, int, S_IRUGO);
> +MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level (in frames) 0-254, default="
> + __MODULE_STRING(MEN_Z192_RX_BUF_LVL_DEF) ")");
> +
> +static int rx_timeout = MEN_Z192_RX_TOUT_DEF;
> +module_param(rx_timeout, int, S_IRUGO);
> +MODULE_PARM_DESC(rx_timeout, "RX IRQ timeout (in 100usec steps), default="
> + __MODULE_STRING(MEN_Z192_RX_TOUT_DEF) ")");
> +
> +struct men_z192_regs {
> + u32 ctl_btr; /* Control and bus timing register */
> + u32 ier; /* Interrupt enable register */
> + u32 buf_lvl; /* Buffer level register */
> + u32 rxa; /* RX Data acknowledge register */
> + u32 txa; /* TX data acknowledge register */
> + u32 rx_tx_sts; /* RX/TX flags and buffer level */
> + u32 ovr_ecc_sts; /* Overrun/ECC status register */
> + u32 idac_ver; /* ID acceptance control / version */
> + u32 rx_tx_err; /* RX/TX error counter register */
> + u32 idar_0_to_3; /* ID acceptance register 0...3 */
> + u32 idar_4_to_7; /* ID acceptance register 4...7 */
> + u32 idmr_0_to_3; /* ID mask register 0...3 */
> + u32 idmr_4_to_7; /* ID mask register 4...7 */
> + u32 rx_timeout; /* receive timeout */
> + u32 timebase; /* Base frequency for baudrate calculation */
> +};
> +
> +struct men_z192 {
> + struct can_priv can;
> + struct napi_struct napi;
> + struct net_device *ndev;
> + struct device *dev;
> +
> + /* Lock for CTL_BTR register access.
> + * This register combines bittiming bits
> + * and the operation mode bits.
> + * It is also used for bit r/m/w access
> + * to all registers.
> + */
> + spinlock_t lock;
> + struct resource *mem;
> + struct men_z192_regs __iomem *regs;
> + void __iomem *dev_base;
> +};
> +
> +struct men_z192_cf_buf {
> + u32 can_id;
> + u32 data[2];
> + u32 length;
> +};
> +
> +enum men_z192_int_state {
> + MEN_Z192_CAN_DIS = 0,
> + MEN_Z192_CAN_EN,
> + MEN_Z192_CAN_NAPI_DIS,
> + MEN_Z192_CAN_NAPI_EN,
> +};
> +
> +static enum can_state bus_state_map[] = {
> + CAN_STATE_ERROR_ACTIVE,
> + CAN_STATE_ERROR_WARNING,
> + CAN_STATE_ERROR_PASSIVE,
> + CAN_STATE_BUS_OFF
> +};
> +
> +static const struct can_bittiming_const men_z192_bittiming_const = {
> + .name = DRV_NAME,
> + .tseg1_min = 4,
> + .tseg1_max = 16,
> + .tseg2_min = 2,
> + .tseg2_max = 8,
> + .sjw_max = 4,
> + .brp_min = 2,
> + .brp_max = 64,
> + .brp_inc = 1,
> +};
> +
> +static inline void men_z192_bit_clr(struct men_z192 *priv, void __iomem *addr,
> + u32 mask)
> +{
> + unsigned long flags;
> + u32 val;
> +
> + spin_lock_irqsave(&priv->lock, flags);
> +
> + val = readl(addr);
> + val &= ~mask;
> + writel(val, addr);
> +
> + spin_unlock_irqrestore(&priv->lock, flags);
> +}
> +
> +static inline void men_z192_bit_set(struct men_z192 *priv, void __iomem *addr,
> + u32 mask)
> +{
> + unsigned long flags;
> + u32 val;
> +
> + spin_lock_irqsave(&priv->lock, flags);
> +
> + val = readl(addr);
> + val |= mask;
> + writel(val, addr);
> +
> + spin_unlock_irqrestore(&priv->lock, flags);
> +}
> +
> +static inline void men_z192_ack_rx_pkg(struct men_z192 *priv,
> + unsigned int count)
u32
> +{
> + writel(count, &priv->regs->rxa);
> +}
> +
> +static inline void men_z192_ack_tx_pkg(struct men_z192 *priv,
> + unsigned int count)
u32
> +{
> + writel(count, &priv->regs->txa);
> +}
> +
> +static void men_z192_set_int(struct men_z192 *priv,
> + enum men_z192_int_state state)
> +{
> + struct men_z192_regs __iomem *regs = priv->regs;
> +
> + switch (state) {
> + case MEN_Z192_CAN_DIS:
> + men_z192_bit_clr(priv, ®s->ier, MEN_Z192_IRQ_ALL);
> + break;
> +
> + case MEN_Z192_CAN_EN:
> + men_z192_bit_set(priv, ®s->ier, MEN_Z192_IRQ_ALL);
> + break;
> +
> + case MEN_Z192_CAN_NAPI_DIS:
> + men_z192_bit_clr(priv, ®s->ier, MEN_Z192_IRQ_NAPI);
> + break;
> +
> + case MEN_Z192_CAN_NAPI_EN:
> + men_z192_bit_set(priv, ®s->ier, MEN_Z192_IRQ_NAPI);
> + break;
> +
> + default:
> + netdev_err(priv->ndev, "invalid interrupt state\n");
> + break;
> + }
> +}
> +
> +static int men_z192_get_berr_counter(const struct net_device *ndev,
> + struct can_berr_counter *bec)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_regs __iomem *regs = priv->regs;
> + u32 err_cnt;
> +
> + err_cnt = readl(®s->rx_tx_err);
> +
> + bec->txerr = MEN_Z192_GET_TX_ERR_CNT(err_cnt);
> + bec->rxerr = MEN_Z192_GET_RX_ERR_CNT(err_cnt);
> +
> + return 0;
> +}
> +
> +static int men_z192_req_run_mode(struct men_z192 *priv)
> +{
> + unsigned int timeout = MEN_Z192_MODE_TOUT_US / 10;
> + struct men_z192_regs __iomem *regs = priv->regs;
> + u32 val;
> +
> + men_z192_bit_clr(priv, ®s->ctl_btr, MEN_Z192_CTL0_INITRQ);
> +
> + while (timeout--) {
> + val = readl(®s->ctl_btr);
> + if (!(val & MEN_Z192_CTL1_INITAK))
> + break;
> +
> + udelay(10);
> + }
readl_relaxed_poll_timeout_atomic
> +
> + if (val & MEN_Z192_CTL1_INITAK)
> + return -ETIMEDOUT;
> +
> + return 0;
> +}
> +
> +static int men_z192_req_init_mode(struct men_z192 *priv)
> +{
> + unsigned int timeout = MEN_Z192_MODE_TOUT_US / 10;
> + struct men_z192_regs __iomem *regs = priv->regs;
> + u32 val;
> +
> + men_z192_bit_set(priv, ®s->ctl_btr, MEN_Z192_CTL0_INITRQ);
> +
> + while (timeout--) {
> + val = readl(®s->ctl_btr);
> + if (val & MEN_Z192_CTL1_INITAK)
> + break;
> +
> + udelay(10);
> + }
Use readl_relaxed_poll_timeout_atomic()
> +
> + if (!(val & MEN_Z192_CTL1_INITAK))
> + return -ETIMEDOUT;
> +
> + return 0;
> +}
> +
> +static int men_z192_read_frame(struct net_device *ndev, unsigned int frame_nr)
> +{
> + struct net_device_stats *stats = &ndev->stats;
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_cf_buf __iomem *cf_buf;
> + struct can_frame *cf;
> + struct sk_buff *skb;
> + u32 cf_offset;
> + u32 length;
> + u32 data;
> + u32 id;
> +
> + skb = alloc_can_skb(ndev, &cf);
> + if (unlikely(!skb)) {
> + stats->rx_dropped++;
> + return 0;
> + }
> +
> + cf_offset = sizeof(struct men_z192_cf_buf) * frame_nr;
> +
> + cf_buf = priv->dev_base + MEN_Z192_RX_BUF_START + cf_offset;
> + length = readl(&cf_buf->length) & MEN_Z192_CFBUF_LEN;
> + id = readl(&cf_buf->can_id);
> +
> + if (id & MEN_Z192_CFBUF_IDE) {
> + /* Extended frame */
> + cf->can_id = (id & MEN_Z192_CFBUF_ID1) >> 3;
> + cf->can_id |= (id & MEN_Z192_CFBUF_ID2) >>
> + MEN_Z192_CFBUF_ID2_SHIFT;
> +
> + cf->can_id |= CAN_EFF_FLAG;
> +
> + if (id & MEN_Z192_CFBUF_SRR)
> + cf->can_id |= CAN_RTR_FLAG;
> + } else {
> + /* Standard frame */
> + cf->can_id = (id & MEN_Z192_CFBUF_ID1) >>
> + MEN_Z192_CFBUF_ID1_SHIFT;
> +
> + if (id & MEN_Z192_CFBUF_S_RTR)
> + cf->can_id |= CAN_RTR_FLAG;
> + }
> +
> + cf->can_dlc = get_can_dlc(length);
> +
> + /* remote transmission request frame
> + * contains no data field even if the
> + * data length is set to a value > 0
> + */
> + if (!(cf->can_id & CAN_RTR_FLAG)) {
> + if (cf->can_dlc > 0) {
> + data = readl(&cf_buf->data[0]);
> + *(__be32 *)cf->data = cpu_to_be32(data);
> + }
> + if (cf->can_dlc > 4) {
> + data = readl(&cf_buf->data[1]);
> + *(__be32 *)(cf->data + 4) = cpu_to_be32(data);
> + }
> + }
> +
> + stats->rx_bytes += cf->can_dlc;
> + stats->rx_packets++;
> + netif_receive_skb(skb);
> +
> + return 1;
> +}
> +
> +static int men_z192_poll(struct napi_struct *napi, int quota)
> +{
> + struct net_device *ndev = napi->dev;
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_regs __iomem *regs = priv->regs;
> + int work_done = 0;
> + u32 frame_cnt;
> + u32 status;
> +
> + status = readl(®s->rx_tx_sts);
> +
> + frame_cnt = MEN_Z192_RX_BUF_CNT(status);
> +
> + while (frame_cnt-- && (work_done < quota)) {
> + work_done += men_z192_read_frame(ndev, 0);
> + men_z192_ack_rx_pkg(priv, 1);
> + }
> +
> + if (work_done < quota) {
> + napi_complete(napi);
napi_complete_done(napi, work_done);
> + men_z192_set_int(priv, MEN_Z192_CAN_NAPI_EN);
> + }
> +
> + return work_done;
> +}
> +
> +static int men_z192_xmit(struct sk_buff *skb, struct net_device *ndev)
> +{
> + struct can_frame *cf = (struct can_frame *)skb->data;
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_regs __iomem *regs = priv->regs;
> + struct net_device_stats *stats = &ndev->stats;
> + struct men_z192_cf_buf __iomem *cf_buf;
> + u32 data[2] = {0, 0};
> + int status;
> + u32 id;
> +
> + if (can_dropped_invalid_skb(ndev, skb))
> + return NETDEV_TX_OK;
> +
> + status = readl(®s->rx_tx_sts);
> +
> + if (MEN_Z192_TX_BUF_CNT(status) >= 255) {
> + netif_stop_queue(ndev);
> + netdev_err(ndev, "not enough space in TX buffer\n");
Please do this at the end of the function, stop the tx_queue, if there
are no tx buffers available anymore.
> +
> + return NETDEV_TX_BUSY;
> + }
> +
> + cf_buf = priv->dev_base + MEN_Z192_TX_BUF_START;
> +
> + if (cf->can_id & CAN_EFF_FLAG) {
> + /* Extended frame */
> + id = ((cf->can_id & CAN_EFF_MASK) <<
> + MEN_Z192_CFBUF_ID2_SHIFT) & MEN_Z192_CFBUF_ID2;
> +
> + id |= (((cf->can_id & CAN_EFF_MASK) >>
> + (CAN_EFF_ID_BITS - CAN_SFF_ID_BITS)) <<
> + MEN_Z192_CFBUF_ID1_SHIFT) & MEN_Z192_CFBUF_ID1;
> +
> + id |= MEN_Z192_CFBUF_IDE;
> +
> + if (cf->can_id & CAN_RTR_FLAG) {
> + id |= MEN_Z192_CFBUF_SRR;
> + id |= MEN_Z192_CFBUF_E_RTR;
> + }
> + } else {
> + /* Standard frame */
> + id = ((cf->can_id & CAN_SFF_MASK) <<
> + MEN_Z192_CFBUF_ID1_SHIFT) & MEN_Z192_CFBUF_ID1;
> +
> + if (cf->can_id & CAN_RTR_FLAG)
> + id |= MEN_Z192_CFBUF_S_RTR;
> + }
> +
> + if (cf->can_dlc > 0)
> + data[0] = be32_to_cpup((__be32 *)(cf->data));
> + if (cf->can_dlc > 3)
> + data[1] = be32_to_cpup((__be32 *)(cf->data + 4));
> +
> + writel(id, &cf_buf->can_id);
> + writel(cf->can_dlc, &cf_buf->length);
> +
> + if (!(cf->can_id & CAN_RTR_FLAG)) {
> + writel(data[0], &cf_buf->data[0]);
> + writel(data[1], &cf_buf->data[1]);
> +
> + stats->tx_bytes += cf->can_dlc;
> + }
> +
> + /* be sure everything is written to the
> + * device before acknowledge the data.
> + */
> + mmiowb();
> +
> + /* trigger the transmission */
> + men_z192_ack_tx_pkg(priv, 1);
> +
> + stats->tx_packets++;
> +
> + kfree_skb(skb);
> +
> + return NETDEV_TX_OK;
> +}
> +
> +static void men_z192_err_interrupt(struct net_device *ndev, u32 status)
> +{
> + struct net_device_stats *stats = &ndev->stats;
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct can_berr_counter bec;
> + struct can_frame *cf;
> + struct sk_buff *skb;
> + enum can_state rx_state = 0, tx_state = 0;
> +
> + skb = alloc_can_err_skb(ndev, &cf);
> + if (unlikely(!skb))
> + return;
Please do the stats handling and the bus_off, even if there's skb.
> +
> + /* put the rx/tx error counter to
> + * the additional controller specific
> + * section of the error frame.
> + */
> + men_z192_get_berr_counter(ndev, &bec);
> + cf->data[6] = bec.txerr;
> + cf->data[7] = bec.rxerr;
> +
> + /* overrun interrupt */
> + if (status & MEN_Z192_RFLG_OVRF) {
> + cf->can_id |= CAN_ERR_CRTL;
> + cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
> + stats->rx_over_errors++;
> + stats->rx_errors++;
> + }
> +
> + /* bus change interrupt */
> + if (status & MEN_Z192_RFLG_CSCIF) {
> + rx_state = bus_state_map[MEN_Z192_GET_RSTATE(status)];
> + tx_state = bus_state_map[MEN_Z192_GET_TSTATE(status)];
> + can_change_state(ndev, cf, tx_state, rx_state);
> +
> + if (priv->can.state == CAN_STATE_BUS_OFF)
> + can_bus_off(ndev);
> + }
> +
> + stats->rx_packets++;
> + stats->rx_bytes += cf->can_dlc;
> + netif_receive_skb(skb);
> +}
> +
> +static irqreturn_t men_z192_isr(int irq, void *dev_id)
> +{
> + struct net_device *ndev = dev_id;
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_regs __iomem *regs = priv->regs;
> + bool handled = false;
> + u32 irq_flags;
> + u32 status;
> +
> + status = readl(®s->rx_tx_sts);
> +
> + irq_flags = status & MEN_Z192_IRQ_FLAGS_ALL;
> + if (!irq_flags)
> + goto out;
> +
> + /* It is save to write to RX_TS_STS[15:0] */
> + writel(irq_flags, ®s->rx_tx_sts);
> +
> + if (irq_flags & MEN_Z192_TFLG_TXIF) {
> + netif_wake_queue(ndev);
> + handled = true;
> + }
> +
> + /* handle errors */
> + if ((irq_flags & MEN_Z192_RFLG_OVRF) ||
> + (irq_flags & MEN_Z192_RFLG_CSCIF)) {
> + men_z192_err_interrupt(ndev, status);
> + handled = true;
> + }
> +
> + /* schedule NAPI if:
> + * - rx IRQ
> + * - rx timeout IRQ
> + */
> + if ((irq_flags & MEN_Z192_RFLG_RXIF) ||
> + (irq_flags & MEN_Z192_RFLG_TOUTF)) {
> + men_z192_set_int(priv, MEN_Z192_CAN_NAPI_DIS);
> + napi_schedule(&priv->napi);
> + handled = true;
> + }
> +
> +out:
> + return IRQ_RETVAL(handled);
> +}
> +
> +static int men_z192_set_bittiming(struct net_device *ndev)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + const struct can_bittiming *bt = &priv->can.bittiming;
> + unsigned long flags;
> + u32 ctlbtr;
> + int ret = 0;
> +
> + spin_lock_irqsave(&priv->lock, flags);
> +
> + ctlbtr = readl(&priv->regs->ctl_btr);
> +
> + if (!(ctlbtr & MEN_Z192_CTL1_INITAK)) {
> + netdev_alert(ndev,
> + "cannot set bittiminig while in running mode\n");
> + ret = -EPERM;
> + goto out_restore;
> + }
> +
> + ctlbtr &= ~(MEN_Z192_BTR0_BRP(0x3f) |
> + MEN_Z192_BTR0_SJW(0x03) |
> + MEN_Z192_BTR1_TSEG1(0x0f) |
> + MEN_Z192_BTR1_TSEG2(0x07) |
> + MEN_Z192_CTL1_LISTEN |
> + MEN_Z192_CTL1_LOOPB |
> + MEN_Z192_BTR1_SAMP);
> +
> + ctlbtr |= MEN_Z192_BTR0_BRP(bt->brp - 1) |
> + MEN_Z192_BTR0_SJW(bt->sjw - 1) |
> + MEN_Z192_BTR1_TSEG1(bt->phase_seg1 + bt->prop_seg - 1) |
> + MEN_Z192_BTR1_TSEG2(bt->phase_seg2 - 1);
> +
> + if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
> + ctlbtr |= MEN_Z192_BTR1_SAMP;
> +
> + if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
> + ctlbtr |= MEN_Z192_CTL1_LISTEN;
> +
> + if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
> + ctlbtr |= MEN_Z192_CTL1_LOOPB;
> +
> + netdev_dbg(ndev, "CTL_BTR=0x%08x\n", ctlbtr);
> +
> + writel(ctlbtr, &priv->regs->ctl_btr);
> +
> +out_restore:
> + spin_unlock_irqrestore(&priv->lock, flags);
> +
> + return ret;
> +}
> +
> +static void men_z192_init_idac(struct net_device *ndev)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_regs __iomem *regs = priv->regs;
> +
> + /* hardware filtering (accept everything) */
> + writel(0x00000000, ®s->idar_0_to_3);
> + writel(0x00000000, ®s->idar_4_to_7);
> + writel(0xffffffff, ®s->idmr_0_to_3);
> + writel(0xffffffff, ®s->idmr_4_to_7);
> +}
> +
> +void men_z192_set_can_state(struct net_device *ndev)
static
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_regs __iomem *regs = priv->regs;
> + enum can_state rx_state, tx_state;
> + u32 status;
> +
> + status = readl(®s->rx_tx_sts);
> +
> + rx_state = bus_state_map[MEN_Z192_GET_RSTATE(status)];
> + tx_state = bus_state_map[MEN_Z192_GET_TSTATE(status)];
> +
> + priv->can.state = max(tx_state, rx_state);
> +}
> +
> +static int men_z192_start(struct net_device *ndev)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + int ret;
> +
> + ret = men_z192_req_init_mode(priv);
> + if (ret)
> + return ret;
> +
> + ret = men_z192_set_bittiming(ndev);
> + if (ret)
> + return ret;
> +
> + ret = men_z192_req_run_mode(priv);
> + if (ret)
> + return ret;
> +
> + men_z192_init_idac(ndev);
> +
> + /* The 16z192 CAN IP does not reset the can bus state
> + * if we enter the init mode. There is also
> + * no software reset to reset the state machine.
> + * We need to read the current state, and
> + * inform the upper layer about the current state.
> + */
> + men_z192_set_can_state(ndev);
> +
> + men_z192_set_int(priv, MEN_Z192_CAN_EN);
> +
> + return 0;
> +}
> +
> +static int men_z192_open(struct net_device *ndev)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + int ret;
> +
> + ret = open_candev(ndev);
> + if (ret)
> + return ret;
> +
> + ret = request_irq(ndev->irq, men_z192_isr, IRQF_SHARED,
> + ndev->name, ndev);
> + if (ret)
> + goto out_close;
> +
> + ret = men_z192_start(ndev);
> + if (ret)
> + goto out_free_irq;
> +
> + napi_enable(&priv->napi);
> + netif_start_queue(ndev);
> +
> + return 0;
> +
> +out_free_irq:
> + free_irq(ndev->irq, ndev);
> +out_close:
> + close_candev(ndev);
> + return ret;
> +}
> +
> +static int men_z192_stop(struct net_device *ndev)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + int ret;
> +
> + men_z192_set_int(priv, MEN_Z192_CAN_DIS);
> +
> + ret = men_z192_req_init_mode(priv);
> + if (ret)
> + return ret;
> +
> + priv->can.state = CAN_STATE_STOPPED;
> +
> + return 0;
> +}
> +
> +static int men_z192_close(struct net_device *ndev)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + int ret;
> +
> + netif_stop_queue(ndev);
> +
> + napi_disable(&priv->napi);
> +
> + ret = men_z192_stop(ndev);
> +
> + free_irq(ndev->irq, ndev);
> +
> + close_candev(ndev);
> +
> + return ret;
> +}
> +
> +static int men_z192_set_mode(struct net_device *ndev, enum can_mode mode)
> +{
> + int ret;
> +
> + switch (mode) {
> + case CAN_MODE_START:
> + ret = men_z192_start(ndev);
> + if (ret)
> + return ret;
> +
> + netif_wake_queue(ndev);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static const struct net_device_ops men_z192_netdev_ops = {
> + .ndo_open = men_z192_open,
> + .ndo_stop = men_z192_close,
> + .ndo_start_xmit = men_z192_xmit,
> + .ndo_change_mtu = can_change_mtu,
> +};
> +
> +static int men_z192_verify_buf_lvl(int buffer_lvl)
> +{
> + if (buffer_lvl < MEN_Z192_MIN_BUF_LVL ||
> + buffer_lvl > MEN_Z192_MAX_BUF_LVL)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static void men_z192_set_buf_lvl_irq(struct net_device *ndev, int rxlvl,
> + int txlvl)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_regs __iomem *regs = priv->regs;
> + int reg_val;
> +
> + if (men_z192_verify_buf_lvl(rxlvl))
> + reg_val = MEN_Z192_RX_BUF_LVL_DEF & MEN_Z192_RX_BUF_LVL;
> + else
> + reg_val = rxlvl & MEN_Z192_RX_BUF_LVL;
> +
> + if (men_z192_verify_buf_lvl(txlvl))
> + reg_val |= (MEN_Z192_TX_BUF_LVL_DEF << 16) &
> + MEN_Z192_TX_BUF_LVL;
> + else
> + reg_val |= (txlvl << 16) & MEN_Z192_TX_BUF_LVL;
> +
> + dev_info(priv->dev, "RX IRQ Level: %d TX IRQ Level: %d\n",
> + rxlvl, txlvl);
> +
> + writel(reg_val, ®s->buf_lvl);
> +}
> +
> +static void men_z192_set_rx_tout(struct net_device *ndev, int tout)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_regs __iomem *regs = priv->regs;
> + int reg_val;
> +
> + if (tout < MEN_Z192_RX_TOUT_MIN || tout > MEN_Z192_RX_TOUT_MAX)
> + reg_val = MEN_Z192_RX_TOUT_MAX;
> + else
> + reg_val = tout;
> +
> + dev_info(priv->dev, "RX IRQ timeout set to: %d\n", reg_val);
> +
> + writel(reg_val, ®s->rx_timeout);
> +}
> +
> +static int men_z192_register(struct net_device *ndev)
> +{
> + struct men_z192 *priv = netdev_priv(ndev);
> + struct men_z192_regs __iomem *regs = priv->regs;
> + u32 ctl_btr;
> + int ret;
> +
> + /* The CAN controller should be always enabled.
> + * There is no way to enable it if disabled.
> + */
> + ctl_btr = readl(®s->ctl_btr);
> + if (!(ctl_btr & MEN_Z192_CTL1_CANE))
> + return -ENODEV;
> +
> + men_z192_set_buf_lvl_irq(ndev, rxlvl, txlvl);
> + men_z192_set_rx_tout(ndev, rx_timeout);
> +
> + ret = men_z192_req_init_mode(priv);
> + if (ret) {
> + dev_err(priv->dev, "failed to request init mode\n");
> + return ret;
> + }
> +
> + return register_candev(ndev);
> +}
> +
> +static void men_z192_unregister(struct net_device *ndev)
^^^^
void, but you return a value....
> +{
> + return unregister_candev(ndev);
...or not, as unregister_candev() itself is void
> +}
> +
> +static int men_z192_probe(struct mcb_device *mdev,
> + const struct mcb_device_id *id)
> +{
> + struct device *dev = &mdev->dev;
> + struct men_z192 *priv;
> + struct net_device *ndev;
> + void __iomem *dev_base;
> + struct resource *mem;
> + u32 timebase;
> + int ret = 0;
> + int irq;
> +
> + mem = mcb_request_mem(mdev, dev_name(dev));
> + if (IS_ERR(mem)) {
> + dev_err(dev, "failed to request device memory");
> + return PTR_ERR(mem);
> + }
> +
> + dev_base = ioremap(mem->start, resource_size(mem));
devm_ioremap_resource
> + if (!dev_base) {
> + dev_err(dev, "failed to ioremap device memory");
> + ret = -ENXIO;
> + goto out_release;
> + }
> +
> + irq = mcb_get_irq(mdev);
> + if (irq <= 0) {
> + ret = -ENODEV;
> + goto out_unmap;
> + }
> +
> + ndev = alloc_candev(sizeof(struct men_z192), 1);
> + if (!ndev) {
> + dev_err(dev, "failed to allocate the can device");
> + ret = -ENOMEM;
> + goto out_unmap;
> + }
> +
> + ndev->netdev_ops = &men_z192_netdev_ops;
> + ndev->irq = irq;
> +
> + priv = netdev_priv(ndev);
> + priv->ndev = ndev;
> + priv->dev = dev;
> +
> + priv->mem = mem;
> + priv->dev_base = dev_base;
> + priv->regs = priv->dev_base + MEN_Z192_REGS_OFFS;
> +
> + timebase = readl(&priv->regs->timebase);
> + if (!timebase) {
> + dev_err(dev, "invalid timebase configured (timebase=%d)\n",
> + timebase);
> + ret = -EINVAL;
> + goto out_unmap;
goto out_free_candev
> + }
> +
> + priv->can.clock.freq = timebase;
> + priv->can.bittiming_const = &men_z192_bittiming_const;
> + priv->can.do_set_mode = men_z192_set_mode;
> + priv->can.do_get_berr_counter = men_z192_get_berr_counter;
> + priv->can.ctrlmode_supported = CAN_CTRLMODE_LISTENONLY |
> + CAN_CTRLMODE_3_SAMPLES |
> + CAN_CTRLMODE_LOOPBACK;
> +
> + spin_lock_init(&priv->lock);
> +
> + netif_napi_add(ndev, &priv->napi, men_z192_poll,
> + MEN_Z192_NAPI_WEIGHT);
> +
> + mcb_set_drvdata(mdev, ndev);
> + SET_NETDEV_DEV(ndev, dev);
> +
> + ret = men_z192_register(ndev);
> + if (ret) {
> + dev_err(dev, "failed to register CAN device");
> + goto out_napi_del;
> + }
> +
> + dev_info(dev, "MEN 16z192 CAN driver successfully registered\n");
> +
> + return 0;
> +
> +out_free_candev:
out_napi_del:
> + netif_napi_del(&priv->napi);
out_free_candev:
> + free_candev(ndev);
> +out_unmap:
> + iounmap(dev_base);
obsolete with devm_ioremap_resource()
> +out_release:
> + mcb_release_mem(mem);
> + return ret;
> +}
> +
> +static void men_z192_remove(struct mcb_device *mdev)
> +{
> + struct net_device *ndev = mcb_get_drvdata(mdev);
> + struct men_z192 *priv = netdev_priv(ndev);
> +
> + men_z192_unregister(ndev);
please call unregister_candev() directly
> + netif_napi_del(&priv->napi);
> +
> + iounmap(priv->dev_base);
obsolete with devm_ioremap_resource()
> + mcb_release_mem(priv->mem);
> +
> + free_candev(ndev);
> +}
> +
> +static const struct mcb_device_id men_z192_ids[] = {
> + { .device = 0xc0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(mcb, men_z192_ids);
> +
> +static struct mcb_driver men_z192_driver = {
> + .driver = {
> + .name = DRV_NAME,
> + .owner = THIS_MODULE,
> + },
> + .probe = men_z192_probe,
> + .remove = men_z192_remove,
> + .id_table = men_z192_ids,
> +};
> +module_mcb_driver(men_z192_driver);
> +
> +MODULE_AUTHOR("Andreas Werner <[email protected]>");
> +MODULE_DESCRIPTION("MEN 16z192 CAN Controller");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("mcb:16z192");
>
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |