2023-09-08 07:01:51

by Linhua Xu

[permalink] [raw]
Subject: [PATCH V2 1/6] pinctrl: sprd: Modify the probe function parameters

From: Linhua Xu <[email protected]>

For UNISOC pin controller, the offset values of the common register and
misc register will be different. Thus put these in the probe function
parameters.

Signed-off-by: Linhua Xu <[email protected]>
---
drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c | 7 +++++-
drivers/pinctrl/sprd/pinctrl-sprd.c | 27 +++++++++++++---------
drivers/pinctrl/sprd/pinctrl-sprd.h | 3 ++-
3 files changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
index d14f382f2392..05158c71ad77 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
@@ -10,6 +10,9 @@

#include "pinctrl-sprd.h"

+#define PINCTRL_REG_OFFSET 0x20
+#define PINCTRL_REG_MISC_OFFSET 0x4020
+
enum sprd_sc9860_pins {
/* pin global control register 0 */
SC9860_VIO28_0_IRTE = SPRD_PIN_INFO(0, GLOBAL_CTRL_PIN, 11, 1, 0),
@@ -926,7 +929,9 @@ static struct sprd_pins_info sprd_sc9860_pins_info[] = {
static int sprd_pinctrl_probe(struct platform_device *pdev)
{
return sprd_pinctrl_core_probe(pdev, sprd_sc9860_pins_info,
- ARRAY_SIZE(sprd_sc9860_pins_info));
+ ARRAY_SIZE(sprd_sc9860_pins_info),
+ PINCTRL_REG_OFFSET,
+ PINCTRL_REG_MISC_OFFSET);
}

static const struct of_device_id sprd_pinctrl_of_match[] = {
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
index ca9659f4e4b1..25fb9ce9ad78 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -30,8 +30,6 @@
#include "pinctrl-sprd.h"

#define PINCTRL_BIT_MASK(width) (~(~0UL << (width)))
-#define PINCTRL_REG_OFFSET 0x20
-#define PINCTRL_REG_MISC_OFFSET 0x4020
#define PINCTRL_REG_LEN 0x4

#define PIN_FUNC_MASK (BIT(4) | BIT(5))
@@ -148,12 +146,16 @@ struct sprd_pinctrl_soc_info {
* @pctl: pointer to the pinctrl handle
* @base: base address of the controller
* @info: pointer to SoC's pins description information
+ * @common_pin_offset: offset value of common register
+ * @misc_pin_offset: offset value of misc register
*/
struct sprd_pinctrl {
struct device *dev;
struct pinctrl_dev *pctl;
void __iomem *base;
struct sprd_pinctrl_soc_info *info;
+ u32 common_pin_offset;
+ u32 misc_pin_offset;
};

#define SPRD_PIN_CONFIG_CONTROL (PIN_CONFIG_END + 1)
@@ -1023,12 +1025,12 @@ static int sprd_pinctrl_add_pins(struct sprd_pinctrl *sprd_pctl,
ctrl_pin++;
} else if (pin->type == COMMON_PIN) {
pin->reg = (unsigned long)sprd_pctl->base +
- PINCTRL_REG_OFFSET + PINCTRL_REG_LEN *
+ sprd_pctl->common_pin_offset + PINCTRL_REG_LEN *
(i - ctrl_pin);
com_pin++;
} else if (pin->type == MISC_PIN) {
pin->reg = (unsigned long)sprd_pctl->base +
- PINCTRL_REG_MISC_OFFSET + PINCTRL_REG_LEN *
+ sprd_pctl->misc_pin_offset + PINCTRL_REG_LEN *
(i - ctrl_pin - com_pin);
}
}
@@ -1045,7 +1047,9 @@ static int sprd_pinctrl_add_pins(struct sprd_pinctrl *sprd_pctl,

int sprd_pinctrl_core_probe(struct platform_device *pdev,
struct sprd_pins_info *sprd_soc_pin_info,
- int pins_cnt)
+ int pins_cnt,
+ u32 common_pin_offset,
+ u32 misc_pin_offset)
{
struct sprd_pinctrl *sprd_pctl;
struct sprd_pinctrl_soc_info *pinctrl_info;
@@ -1069,6 +1073,8 @@ int sprd_pinctrl_core_probe(struct platform_device *pdev,

sprd_pctl->info = pinctrl_info;
sprd_pctl->dev = &pdev->dev;
+ sprd_pctl->common_pin_offset = common_pin_offset;
+ sprd_pctl->misc_pin_offset = misc_pin_offset;
platform_set_drvdata(pdev, sprd_pctl);

ret = sprd_pinctrl_add_pins(sprd_pctl, sprd_soc_pin_info, pins_cnt);
@@ -1077,12 +1083,6 @@ int sprd_pinctrl_core_probe(struct platform_device *pdev,
return ret;
}

- ret = sprd_pinctrl_parse_dt(sprd_pctl);
- if (ret) {
- dev_err(&pdev->dev, "fail to parse dt properties\n");
- return ret;
- }
-
pin_desc = devm_kcalloc(&pdev->dev,
pinctrl_info->npins,
sizeof(struct pinctrl_pin_desc),
@@ -1100,6 +1100,11 @@ int sprd_pinctrl_core_probe(struct platform_device *pdev,
sprd_pinctrl_desc.name = dev_name(&pdev->dev);
sprd_pinctrl_desc.npins = pinctrl_info->npins;

+ ret = sprd_pinctrl_parse_dt(sprd_pctl);
+ if (ret) {
+ dev_err(&pdev->dev, "fail to parse dt properties\n");
+ return ret;
+ }
sprd_pctl->pctl = pinctrl_register(&sprd_pinctrl_desc,
&pdev->dev, (void *)sprd_pctl);
if (IS_ERR(sprd_pctl->pctl)) {
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.h b/drivers/pinctrl/sprd/pinctrl-sprd.h
index 69544a3cd635..a696f81ce663 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd.h
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.h
@@ -52,7 +52,8 @@ struct sprd_pins_info {

int sprd_pinctrl_core_probe(struct platform_device *pdev,
struct sprd_pins_info *sprd_soc_pin_info,
- int pins_cnt);
+ int pins_cnt, u32 common_pin_offset,
+ u32 misc_pin_offset);
int sprd_pinctrl_remove(struct platform_device *pdev);
void sprd_pinctrl_shutdown(struct platform_device *pdev);

--
2.17.1


2023-09-12 08:23:09

by Baolin Wang

[permalink] [raw]
Subject: Re: [PATCH V2 1/6] pinctrl: sprd: Modify the probe function parameters



On 9/8/2023 1:51 PM, Linhua Xu wrote:
> From: Linhua Xu <[email protected]>
>
> For UNISOC pin controller, the offset values of the common register and
> misc register will be different. Thus put these in the probe function
> parameters.
>
> Signed-off-by: Linhua Xu <[email protected]>
> ---
> drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c | 7 +++++-
> drivers/pinctrl/sprd/pinctrl-sprd.c | 27 +++++++++++++---------
> drivers/pinctrl/sprd/pinctrl-sprd.h | 3 ++-
> 3 files changed, 24 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
> index d14f382f2392..05158c71ad77 100644
> --- a/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
> +++ b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
> @@ -10,6 +10,9 @@
>
> #include "pinctrl-sprd.h"
>
> +#define PINCTRL_REG_OFFSET 0x20
> +#define PINCTRL_REG_MISC_OFFSET 0x4020
> +
> enum sprd_sc9860_pins {
> /* pin global control register 0 */
> SC9860_VIO28_0_IRTE = SPRD_PIN_INFO(0, GLOBAL_CTRL_PIN, 11, 1, 0),
> @@ -926,7 +929,9 @@ static struct sprd_pins_info sprd_sc9860_pins_info[] = {
> static int sprd_pinctrl_probe(struct platform_device *pdev)
> {
> return sprd_pinctrl_core_probe(pdev, sprd_sc9860_pins_info,
> - ARRAY_SIZE(sprd_sc9860_pins_info));
> + ARRAY_SIZE(sprd_sc9860_pins_info),
> + PINCTRL_REG_OFFSET,
> + PINCTRL_REG_MISC_OFFSET);
> }
>
> static const struct of_device_id sprd_pinctrl_of_match[] = {
> diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
> index ca9659f4e4b1..25fb9ce9ad78 100644
> --- a/drivers/pinctrl/sprd/pinctrl-sprd.c
> +++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
> @@ -30,8 +30,6 @@
> #include "pinctrl-sprd.h"
>
> #define PINCTRL_BIT_MASK(width) (~(~0UL << (width)))
> -#define PINCTRL_REG_OFFSET 0x20
> -#define PINCTRL_REG_MISC_OFFSET 0x4020
> #define PINCTRL_REG_LEN 0x4
>
> #define PIN_FUNC_MASK (BIT(4) | BIT(5))
> @@ -148,12 +146,16 @@ struct sprd_pinctrl_soc_info {
> * @pctl: pointer to the pinctrl handle
> * @base: base address of the controller
> * @info: pointer to SoC's pins description information
> + * @common_pin_offset: offset value of common register
> + * @misc_pin_offset: offset value of misc register
> */
> struct sprd_pinctrl {
> struct device *dev;
> struct pinctrl_dev *pctl;
> void __iomem *base;
> struct sprd_pinctrl_soc_info *info;
> + u32 common_pin_offset;
> + u32 misc_pin_offset;
> };
>
> #define SPRD_PIN_CONFIG_CONTROL (PIN_CONFIG_END + 1)
> @@ -1023,12 +1025,12 @@ static int sprd_pinctrl_add_pins(struct sprd_pinctrl *sprd_pctl,
> ctrl_pin++;
> } else if (pin->type == COMMON_PIN) {
> pin->reg = (unsigned long)sprd_pctl->base +
> - PINCTRL_REG_OFFSET + PINCTRL_REG_LEN *
> + sprd_pctl->common_pin_offset + PINCTRL_REG_LEN *
> (i - ctrl_pin);
> com_pin++;
> } else if (pin->type == MISC_PIN) {
> pin->reg = (unsigned long)sprd_pctl->base +
> - PINCTRL_REG_MISC_OFFSET + PINCTRL_REG_LEN *
> + sprd_pctl->misc_pin_offset + PINCTRL_REG_LEN *
> (i - ctrl_pin - com_pin);
> }
> }
> @@ -1045,7 +1047,9 @@ static int sprd_pinctrl_add_pins(struct sprd_pinctrl *sprd_pctl,
>
> int sprd_pinctrl_core_probe(struct platform_device *pdev,
> struct sprd_pins_info *sprd_soc_pin_info,
> - int pins_cnt)
> + int pins_cnt,
> + u32 common_pin_offset,
> + u32 misc_pin_offset)
> {
> struct sprd_pinctrl *sprd_pctl;
> struct sprd_pinctrl_soc_info *pinctrl_info;
> @@ -1069,6 +1073,8 @@ int sprd_pinctrl_core_probe(struct platform_device *pdev,
>
> sprd_pctl->info = pinctrl_info;
> sprd_pctl->dev = &pdev->dev;
> + sprd_pctl->common_pin_offset = common_pin_offset;
> + sprd_pctl->misc_pin_offset = misc_pin_offset;
> platform_set_drvdata(pdev, sprd_pctl);
>
> ret = sprd_pinctrl_add_pins(sprd_pctl, sprd_soc_pin_info, pins_cnt);
> @@ -1077,12 +1083,6 @@ int sprd_pinctrl_core_probe(struct platform_device *pdev,
> return ret;
> }
>
> - ret = sprd_pinctrl_parse_dt(sprd_pctl);
> - if (ret) {
> - dev_err(&pdev->dev, "fail to parse dt properties\n");
> - return ret;
> - }
> -
> pin_desc = devm_kcalloc(&pdev->dev,
> pinctrl_info->npins,
> sizeof(struct pinctrl_pin_desc),
> @@ -1100,6 +1100,11 @@ int sprd_pinctrl_core_probe(struct platform_device *pdev,
> sprd_pinctrl_desc.name = dev_name(&pdev->dev);
> sprd_pinctrl_desc.npins = pinctrl_info->npins;
>
> + ret = sprd_pinctrl_parse_dt(sprd_pctl);
> + if (ret) {
> + dev_err(&pdev->dev, "fail to parse dt properties\n");
> + return ret;
> + }

Why change this? If this change fixed anything, please mention it in the
commit log.

> sprd_pctl->pctl = pinctrl_register(&sprd_pinctrl_desc,
> &pdev->dev, (void *)sprd_pctl);
> if (IS_ERR(sprd_pctl->pctl)) {
> diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.h b/drivers/pinctrl/sprd/pinctrl-sprd.h
> index 69544a3cd635..a696f81ce663 100644
> --- a/drivers/pinctrl/sprd/pinctrl-sprd.h
> +++ b/drivers/pinctrl/sprd/pinctrl-sprd.h
> @@ -52,7 +52,8 @@ struct sprd_pins_info {
>
> int sprd_pinctrl_core_probe(struct platform_device *pdev,
> struct sprd_pins_info *sprd_soc_pin_info,
> - int pins_cnt);
> + int pins_cnt, u32 common_pin_offset,
> + u32 misc_pin_offset);

IMO, I don't like this modification since it lacks scalability, and just
imagine that there might be more differences in SoC in the future. So
adding a SoC structure in sprd_pinctrl_of_match() and parsing it in the
sprd-pinctrl core seems the right way to go.

> int sprd_pinctrl_remove(struct platform_device *pdev);
> void sprd_pinctrl_shutdown(struct platform_device *pdev);
>