Rather than a standalone executable merge recordmcount as a sub command
of objtool. This is a small step towards cleaning up recordmcount and
eventually sharing ELF code with objtool.
For the initial step all that's required is a bit of Makefile changes
and invoking the former main() function from recordmcount.c because the
subcommand code uses similar function arguments as main when dispatching.
objtool ignores some object files that tracing does not, specifically
those with OBJECT_FILES_NON_STANDARD Makefile variables. For this reason
we keep the recordmcount_dep separate from the objtool_dep. When using
objtool mcount we can also, like the other objtool invocations, just
depend on the binary rather than the source the binary is built from.
Subsequent patches will gradually convert recordmcount to use
more and more of libelf/objtool's ELF accessor code. This will both
clean up recordmcount to be more easily readable and remove
recordmcount's crude accessor wrapping code.
Signed-off-by: Matt Helsley <[email protected]>
---
Documentation/dontdiff | 2 +-
Documentation/trace/ftrace.rst | 6 ++--
Makefile | 15 ++++------
arch/arm64/include/asm/ftrace.h | 2 +-
arch/x86/include/asm/ftrace.h | 2 +-
kernel/trace/Kconfig | 9 +++++-
scripts/Makefile.build | 19 +++++++------
scripts/sorttable.h | 2 +-
tools/objtool/Build | 4 +--
tools/objtool/Makefile | 20 ++-----------
tools/objtool/builtin-mcount.c | 50 +++++++++++++++++++++++++++++++++
tools/objtool/builtin.h | 1 +
tools/objtool/objtool.c | 1 +
tools/objtool/objtool.h | 1 +
tools/objtool/recordmcount.c | 36 +++++++-----------------
tools/objtool/weak.c | 5 ++++
16 files changed, 104 insertions(+), 71 deletions(-)
create mode 100644 tools/objtool/builtin-mcount.c
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index ef9519c32c55..82cc4e3bb713 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -211,7 +211,7 @@ r420_reg_safe.h
r600_reg_safe.h
randomize_layout_hash.h
randomize_layout_seed.h
-recordmcount
+objtool
relocs
rlim_names.h
rn50_reg_safe.h
diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst
index 24ec4ec2d98d..eefb966e5832 100644
--- a/Documentation/trace/ftrace.rst
+++ b/Documentation/trace/ftrace.rst
@@ -2684,8 +2684,8 @@ every kernel function, produced by the -pg switch in gcc),
starts of pointing to a simple return. (Enabling FTRACE will
include the -pg switch in the compiling of the kernel.)
-At compile time every C file object is run through the
-recordmcount program (located in the tools/objtool directory). This
+At compile time every C file object is run through objtool's
+mcount subcommand (located in the tools/objtool directory). This
program will parse the ELF headers in the C object to find all
the locations in the .text section that call mcount. Starting
with gcc version 4.6, the -mfentry has been added for x86, which
@@ -2699,7 +2699,7 @@ can be traced.
A section called "__mcount_loc" is created that holds
references to all the mcount/fentry call sites in the .text section.
-The recordmcount program re-links this section back into the
+Running "objtool mcount" re-links this section back into the
original object. The final linking stage of the kernel will add all these
references into a single table.
diff --git a/Makefile b/Makefile
index e20c30f82c58..3842d7258b43 100644
--- a/Makefile
+++ b/Makefile
@@ -841,6 +841,7 @@ ifdef CONFIG_FTRACE_MCOUNT_RECORD
ifeq ($(call cc-option-yn,-mrecord-mcount),y)
CC_FLAGS_FTRACE += -mrecord-mcount
export CC_USING_RECORD_MCOUNT := 1
+ undefine CONFIG_OBJTOOL_SUBCMD_MCOUNT
endif
ifdef CONFIG_HAVE_NOP_MCOUNT
ifeq ($(call cc-option-yn, -mnop-mcount),y)
@@ -848,7 +849,7 @@ ifdef CONFIG_FTRACE_MCOUNT_RECORD
CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT
endif
endif
-endif
+endif # CONFIG_FTRACE_MCOUNT_RECORD
ifdef CONFIG_HAVE_FENTRY
ifeq ($(call cc-option-yn, -mfentry),y)
CC_FLAGS_FTRACE += -mfentry
@@ -858,14 +859,7 @@ endif
export CC_FLAGS_FTRACE
KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING)
KBUILD_AFLAGS += $(CC_FLAGS_USING)
-ifdef CONFIG_DYNAMIC_FTRACE
- ifdef CONFIG_HAVE_C_RECORDMCOUNT
- BUILD_C_RECORDMCOUNT := y
- export BUILD_C_RECORDMCOUNT
- objtool_target := tools/objtool FORCE
- endif
-endif
-endif
+endif # CONFIG_FUNCTION_TRACER
# We trigger additional mismatches with less inlining
ifdef CONFIG_DEBUG_SECTION_MISMATCH
@@ -1196,6 +1190,9 @@ ifneq ($(has_libelf),1)
ifdef CONFIG_UNWINDER_ORC
@echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
@false
+ else ifdef CONFIG_OBJTOOL_SUBCMD_MCOUNT
+ @echo "error: Cannot generate tracing metadata for CONFIG_DYNAMIC_FTRACE, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
+ @false
else
ifeq ($(SKIP_STACK_VALIDATION),1)
@echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h
index 91fa4baa1a93..5fd71bf592d5 100644
--- a/arch/arm64/include/asm/ftrace.h
+++ b/arch/arm64/include/asm/ftrace.h
@@ -62,7 +62,7 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
return addr + AARCH64_INSN_SIZE;
/*
* addr is the address of the mcount call instruction.
- * recordmcount does the necessary offset calculation.
+ * "objtool mcount" does the necessary offset calculation.
*/
return addr;
}
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index 84b9449be080..c849f3818369 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -23,7 +23,7 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
{
/*
* addr is the address of the mcount call instruction.
- * recordmcount does the necessary offset calculation.
+ * "objtool mcount" does the necessary offset calculation.
*/
return addr;
}
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index a4020c0b4508..a56abf4bd331 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -54,7 +54,13 @@ config HAVE_NOP_MCOUNT
config HAVE_C_RECORDMCOUNT
bool
help
- C version of recordmcount available?
+ Arch supports objtool mcount subcommand
+
+config OBJTOOL_SUBCMD_MCOUNT
+ bool
+ select OBJTOOL_SUBCMDS
+ help
+ Record mcount call locations using objtool
config TRACER_MAX_TRACE
bool
@@ -176,6 +182,7 @@ config DYNAMIC_FTRACE
bool "enable/disable function tracing dynamically"
depends on FUNCTION_TRACER
depends on HAVE_DYNAMIC_FTRACE
+ select OBJTOOL_SUBCMD_MCOUNT if HAVE_C_RECORDMCOUNT
default y
help
This option will modify all the calls to function tracing
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index f3f58d71951c..7c8b4fced29c 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -177,22 +177,23 @@ endif
ifdef CONFIG_FTRACE_MCOUNT_RECORD
ifndef CC_USING_RECORD_MCOUNT
-# compiler will not generate __mcount_loc use recordmcount or recordmcount.pl
-ifdef BUILD_C_RECORDMCOUNT
+# The compiler does not support generation of the __mcount_loc section.
+# Generate it manually with "objtool mcount record" or recordmcount.pl
+ifdef CONFIG_OBJTOOL_SUBCMD_MCOUNT
ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
RECORDMCOUNT_FLAGS = -w
endif
# Due to recursion, we must skip empty.o.
# The empty.o file is created in the make process in order to determine
# the target endianness and word size. It is made before all other C
-# files, including recordmcount.
+# files, including objtool.
sub_cmd_record_mcount = \
if [ $(@) != "scripts/mod/empty.o" ]; then \
- $(objtree)/tools/objtool/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \
+ $(objtree)/tools/objtool/objtool mcount record $(RECORDMCOUNT_FLAGS) "$(@)"; \
fi;
-recordmcount_source := $(srctree)/tools/objtool/recordmcount.c \
- $(srctree)/tools/objtool/recordmcount.h
+recordmcount_dep = $(objtree)/tools/objtool/objtool \
+ $(wildcard include/config/ftrace/mcount/record.h)
else
sub_cmd_record_mcount = perl $(srctree)/tools/objtool/recordmcount.pl "$(ARCH)" \
"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
@@ -200,8 +201,8 @@ sub_cmd_record_mcount = perl $(srctree)/tools/objtool/recordmcount.pl "$(ARCH)"
"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)" \
"$(LD) $(KBUILD_LDFLAGS)" "$(NM)" "$(RM)" "$(MV)" \
"$(if $(part-of-module),1,0)" "$(@)";
-recordmcount_source := $(srctree)/tools/objtool/recordmcount.pl
-endif # BUILD_C_RECORDMCOUNT
+recordmcount_dep = $(srctree)/tools/objtool/recordmcount.pl
+endif # CONFIG_OBJTOOL_SUBCMD_MCOUNT
cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)), \
$(sub_cmd_record_mcount))
endif # CC_USING_RECORD_MCOUNT
@@ -277,7 +278,7 @@ cmd_undef_syms = echo
endif
# Built-in and composite module parts
-$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
+$(obj)/%.o: $(src)/%.c $(recordmcount_dep) $(objtool_dep) FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2fefb13..986aa3414cf6 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -11,7 +11,7 @@
* Some of code was taken out of arch/x86/kernel/unwind_orc.c, written by:
* Copyright (C) 2017 Josh Poimboeuf <[email protected]>
*
- * Some of this code was taken out of recordmcount.h written by:
+ * Some of this code was taken out of objtool mcount written by:
*
* Copyright 2009 John F. Reiser <[email protected]>. All rights reserved.
* Copyright 2010 Steven Rostedt <[email protected]>, Red Hat Inc.
diff --git a/tools/objtool/Build b/tools/objtool/Build
index 4d399aff76de..f4f0515d4f91 100644
--- a/tools/objtool/Build
+++ b/tools/objtool/Build
@@ -7,9 +7,11 @@ objtool-$(SUBCMD_CHECK) += special.o
objtool-$(SUBCMD_ORC) += check.o
objtool-$(SUBCMD_ORC) += orc_gen.o
objtool-$(SUBCMD_ORC) += orc_dump.o
+objtool-$(SUBCMD_MCOUNT) += recordmcount.o
objtool-y += builtin-check.o
objtool-y += builtin-orc.o
+objtool-y += builtin-mcount.o
objtool-y += elf.o
objtool-y += objtool.o
@@ -35,5 +37,3 @@ $(OUTPUT)str_error_r.o: ../lib/str_error_r.c FORCE
$(OUTPUT)librbtree.o: ../lib/rbtree.c FORCE
$(call rule_mkdir)
$(call if_changed_dep,cc_o_c)
-
-recordmcount-y += recordmcount.o
diff --git a/tools/objtool/Makefile b/tools/objtool/Makefile
index d7aef1f8718e..e113e0333197 100644
--- a/tools/objtool/Makefile
+++ b/tools/objtool/Makefile
@@ -32,12 +32,6 @@ OBJTOOL_IN := $(OBJTOOL)-in.o
LIBELF_FLAGS := $(shell pkg-config libelf --cflags 2>/dev/null)
LIBELF_LIBS := $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf)
-RECORDMCOUNT := $(OUTPUT)recordmcount
-RECORDMCOUNT_IN := $(RECORDMCOUNT)-in.o
-ifeq ($(BUILD_C_RECORDMCOUNT),y)
-all: $(RECORDMCOUNT)
-endif
-
all: $(OBJTOOL)
INCLUDES := -I$(srctree)/tools/include \
@@ -56,13 +50,9 @@ AWK = awk
SUBCMD_CHECK := $(CONFIG_OBJTOOL_SUBCMD_CHECK)
SUBCMD_ORC := $(CONFIG_OBJTOOL_SUBCMD_ORC)
+SUBCMD_MCOUNT := $(CONFIG_OBJTOOL_SUBCMD_MCOUNT)
-ifeq ($(SRCARCH),x86)
- SUBCMD_CHECK := y
- SUBCMD_ORC := y
-endif
-
-export SUBCMD_CHECK SUBCMD_ORC
+export SUBCMD_CHECK SUBCMD_ORC SUBCMD_MCOUNT
export srctree OUTPUT CFLAGS SRCARCH AWK
include $(srctree)/tools/build/Makefile.include
@@ -70,20 +60,16 @@ $(OBJTOOL_IN): fixdep FORCE
@$(CONFIG_SHELL) ./sync-check.sh
@$(MAKE) $(build)=objtool
-$(RECORDMCOUNT_IN): fixdep FORCE
- @$(MAKE) $(build)=recordmcount
$(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
-$(RECORDMCOUNT): $(RECORDMCOUNT_IN)
- $(QUIET_LINK)$(CC) $(RECORDMCOUNT_IN) $(KBUILD_HOSTLDFLAGS) -o $@
$(LIBSUBCMD): fixdep FORCE
$(Q)$(MAKE) -C $(SUBCMD_SRCDIR) OUTPUT=$(LIBSUBCMD_OUTPUT)
clean:
- $(call QUIET_CLEAN, objtool) $(RM) $(OBJTOOL) $(RECORDMCOUNT)
+ $(call QUIET_CLEAN, objtool) $(RM) $(OBJTOOL)
$(Q)find $(OUTPUT) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
$(Q)$(RM) $(OUTPUT)arch/x86/inat-tables.c $(OUTPUT)fixdep
diff --git a/tools/objtool/builtin-mcount.c b/tools/objtool/builtin-mcount.c
new file mode 100644
index 000000000000..4ffc105ab7bb
--- /dev/null
+++ b/tools/objtool/builtin-mcount.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * objtool mcount:
+ *
+ * This command analyzes a .o file and constructs a table of the locations of
+ * calls to 'mcount' useful to ftrace. We can optionally append this table to
+ * the object file ("objtool mcount record foo.o") or output it separately
+ * ("objtool mcount show"). The latter can be used to compare the expected
+ * callers of mcount to those actually found.
+ */
+
+#include <string.h>
+#include <subcmd/parse-options.h>
+#include "builtin.h"
+#include "objtool.h"
+
+static const char * const mcount_usage[] = {
+ "objtool mcount record [<options>] file.o [file2.o ...]",
+ NULL,
+};
+
+bool warn_on_notrace_sect;
+
+const static struct option mcount_options[] = {
+ OPT_BOOLEAN('w', "warn-on-notrace-section", &warn_on_notrace_sect,
+ "Emit a warning when a section omitting mcount "
+ "(possibly due to \"notrace\" marking) is encountered"),
+ OPT_END(),
+};
+
+int cmd_mcount(int argc, const char **argv)
+{
+ argc--; argv++;
+ if (argc <= 0)
+ usage_with_options(mcount_usage, mcount_options);
+
+ if (!strncmp(argv[0], "record", 6)) {
+ argc = parse_options(argc, argv,
+ mcount_options, mcount_usage, 0);
+ if (argc < 1)
+ usage_with_options(mcount_usage, mcount_options);
+
+ return record_mcount(argc, argv);
+ }
+
+ usage_with_options(mcount_usage, mcount_options);
+
+ return 0;
+}
diff --git a/tools/objtool/builtin.h b/tools/objtool/builtin.h
index 85c979caa367..d8a8aa9e16c0 100644
--- a/tools/objtool/builtin.h
+++ b/tools/objtool/builtin.h
@@ -12,5 +12,6 @@ extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats,
extern int cmd_check(int argc, const char **argv);
extern int cmd_orc(int argc, const char **argv);
+extern int cmd_mcount(int argc, const char **argv);
#endif /* _BUILTIN_H */
diff --git a/tools/objtool/objtool.c b/tools/objtool/objtool.c
index 58fdda510653..b2d6b9fec7dd 100644
--- a/tools/objtool/objtool.c
+++ b/tools/objtool/objtool.c
@@ -35,6 +35,7 @@ static const char objtool_usage_string[] =
static struct cmd_struct objtool_cmds[] = {
{"check", cmd_check, "Perform stack metadata validation on an object file" },
{"orc", cmd_orc, "Generate in-place ORC unwind tables for an object file" },
+ {"mcount", cmd_mcount, "Construct a table of locations of calls to mcount. Useful for ftrace."},
};
bool help;
diff --git a/tools/objtool/objtool.h b/tools/objtool/objtool.h
index 528028a66816..c6563aa9d921 100644
--- a/tools/objtool/objtool.h
+++ b/tools/objtool/objtool.h
@@ -21,6 +21,7 @@ struct objtool_file {
int check(const char *objname, bool orc);
int orc_dump(const char *objname);
+int record_mcount(int argc, const char **argv);
int create_orc(struct objtool_file *file);
int create_orc_sections(struct objtool_file *file);
diff --git a/tools/objtool/recordmcount.c b/tools/objtool/recordmcount.c
index 7225107a9aaf..601e83840085 100644
--- a/tools/objtool/recordmcount.c
+++ b/tools/objtool/recordmcount.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * recordmcount.c: construct a table of the locations of calls to 'mcount'
- * so that ftrace can find them quickly.
+ * Construct a table of the locations of calls to 'mcount' so that ftrace
+ * can find them quickly.
* Copyright 2009 John F. Reiser <[email protected]>. All rights reserved.
*
* Restructured to fit Linux format, as well as other updates:
@@ -24,7 +24,6 @@
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
-#include <getopt.h>
#include <elf.h>
#include <fcntl.h>
#include <stdio.h>
@@ -32,6 +31,8 @@
#include <string.h>
#include <unistd.h>
+#include "objtool.h"
+
#ifndef EM_AARCH64
#define EM_AARCH64 183
#define R_AARCH64_NONE 0
@@ -47,7 +48,7 @@ static int mmap_failed; /* Boolean flag. */
static char gpfx; /* prefix for global symbol name (sometimes '_') */
static struct stat sb; /* Remember .st_size, etc. */
static const char *altmcount; /* alternate mcount symbol name */
-static int warn_on_notrace_sect; /* warn when section has mcount not being recorded */
+extern int warn_on_notrace_sect; /* warn when section has mcount not being recorded */
static void *file_map; /* pointer of the mapped file */
static void *file_end; /* pointer to the end of the mapped file */
static int file_updated; /* flag to state file was changed */
@@ -488,7 +489,7 @@ static int do_file(char const *const fname)
goto out;
case ELFDATA2LSB:
if (*(unsigned char const *)&endian != 1) {
- /* main() is big endian, file.o is little endian. */
+ /* objtool is big endian, file.o is little endian. */
w = w4rev;
w2 = w2rev;
w8 = w8rev;
@@ -501,7 +502,7 @@ static int do_file(char const *const fname)
break;
case ELFDATA2MSB:
if (*(unsigned char const *)&endian != 0) {
- /* main() is little endian, file.o is big endian. */
+ /* objtool is little endian, file.o is big endian. */
w = w4rev;
w2 = w2rev;
w8 = w8rev;
@@ -615,33 +616,16 @@ static int do_file(char const *const fname)
return rc;
}
-int main(int argc, char *argv[])
+int record_mcount(int argc, const char **argv)
{
const char ftrace[] = "/ftrace.o";
int ftrace_size = sizeof(ftrace) - 1;
int n_error = 0; /* gcc-4.3.0 false positive complaint */
- int c;
int i;
- while ((c = getopt(argc, argv, "w")) >= 0) {
- switch (c) {
- case 'w':
- warn_on_notrace_sect = 1;
- break;
- default:
- fprintf(stderr, "usage: recordmcount [-w] file.o...\n");
- return 0;
- }
- }
-
- if ((argc - optind) < 1) {
- fprintf(stderr, "usage: recordmcount [-w] file.o...\n");
- return 0;
- }
-
/* Process each file in turn, allowing deep failure. */
- for (i = optind; i < argc; i++) {
- char *file = argv[i];
+ for (i = 0; i < argc; i++) {
+ const char *file = argv[i];
int len;
/*
diff --git a/tools/objtool/weak.c b/tools/objtool/weak.c
index 942ea5e8ac36..0c9161bb1612 100644
--- a/tools/objtool/weak.c
+++ b/tools/objtool/weak.c
@@ -29,6 +29,11 @@ int __weak orc_dump(const char *_objname)
UNSUPPORTED("orc");
}
+int __weak record_mcount(int argc, const char **argv)
+{
+ UNSUPPORTED("mcount");
+}
+
int __weak create_orc(struct objtool_file *file)
{
UNSUPPORTED("orc");
--
2.20.1
On Thu, 18 Jun 2020, Matt Helsley wrote:
> Rather than a standalone executable merge recordmcount as a sub command
> of objtool. This is a small step towards cleaning up recordmcount and
> eventually sharing ELF code with objtool.
>
> For the initial step all that's required is a bit of Makefile changes
> and invoking the former main() function from recordmcount.c because the
> subcommand code uses similar function arguments as main when dispatching.
>
> objtool ignores some object files that tracing does not, specifically
> those with OBJECT_FILES_NON_STANDARD Makefile variables. For this reason
> we keep the recordmcount_dep separate from the objtool_dep. When using
> objtool mcount we can also, like the other objtool invocations, just
> depend on the binary rather than the source the binary is built from.
>
> Subsequent patches will gradually convert recordmcount to use
> more and more of libelf/objtool's ELF accessor code. This will both
> clean up recordmcount to be more easily readable and remove
> recordmcount's crude accessor wrapping code.
I'll try to leave only relevant parts for a question below...
> sub_cmd_record_mcount = \
> if [ $(@) != "scripts/mod/empty.o" ]; then \
> - $(objtree)/tools/objtool/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \
> + $(objtree)/tools/objtool/objtool mcount record $(RECORDMCOUNT_FLAGS) "$(@)"; \
> fi;
> +int cmd_mcount(int argc, const char **argv)
> +{
> + argc--; argv++;
> + if (argc <= 0)
> + usage_with_options(mcount_usage, mcount_options);
> +
> + if (!strncmp(argv[0], "record", 6)) {
> + argc = parse_options(argc, argv,
> + mcount_options, mcount_usage, 0);
> + if (argc < 1)
> + usage_with_options(mcount_usage, mcount_options);
> +
> + return record_mcount(argc, argv);
> + }
> +
> + usage_with_options(mcount_usage, mcount_options);
> +
> + return 0;
> +}
> -int main(int argc, char *argv[])
> +int record_mcount(int argc, const char **argv)
> {
> const char ftrace[] = "/ftrace.o";
> int ftrace_size = sizeof(ftrace) - 1;
> int n_error = 0; /* gcc-4.3.0 false positive complaint */
> - int c;
> int i;
>
> - while ((c = getopt(argc, argv, "w")) >= 0) {
> - switch (c) {
> - case 'w':
> - warn_on_notrace_sect = 1;
> - break;
> - default:
> - fprintf(stderr, "usage: recordmcount [-w] file.o...\n");
> - return 0;
> - }
> - }
> -
> - if ((argc - optind) < 1) {
> - fprintf(stderr, "usage: recordmcount [-w] file.o...\n");
> - return 0;
> - }
> -
> /* Process each file in turn, allowing deep failure. */
> - for (i = optind; i < argc; i++) {
> - char *file = argv[i];
> + for (i = 0; i < argc; i++) {
> + const char *file = argv[i];
> int len;
Do you expect that mcount subcmd would be called on more than one object
file at a time? I don't see a reason for that with all the Makefile
changes, but I may be missing something (Kbuild is a maze for me).
Because if not, I think it would be nice to make record_mcount() more
similar to what we have for check(). After Julien's changes
([email protected]) at least. So that
record_mcount() could accept struct objtool_file and work directly on
that.
It would also impact several other patches in the series. For example,
is there a need for a private 'struct elf *lf' in mcount.c?
Thanks
Miroslav