Hi,
On 25.07.2019 16:59, Chanwoo Choi wrote:
> Hi,
>
> You are missing my Acked tag.
I changed code, so I can not add your Ack in v4.
Please send new Ack for this patch.
> 2019년 7월 25일 (목) 오후 11:44, <[email protected]>님이 작성:
>>
>> Regulators should be enabled before clocks to avoid h/w hang. This
>> require change in exynos_bus_probe() to move exynos_bus_parse_of()
>> after exynos_bus_parent_parse_of() and change in error handling.
>> Similar change is needed in exynos_bus_exit() where clock should be
>> disabled before regulators.
>>
>> Signed-off-by: Kamil Konieczny <[email protected]>
>> ---
>> Changes:
>> v4:
>> - move regulator disable after clock disable
>> - remove unrelated changes
>> - add disabling regulators in error path in exynos_bus_probe()
>>
>> ---
>> drivers/devfreq/exynos-bus.c | 31 +++++++++++++++++--------------
>> 1 file changed, 17 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
>> index 486cc5b422f1..f34fa26f00d0 100644
>> --- a/drivers/devfreq/exynos-bus.c
>> +++ b/drivers/devfreq/exynos-bus.c
>> @@ -194,11 +194,10 @@ static void exynos_bus_exit(struct device *dev)
>> if (ret < 0)
>> dev_warn(dev, "failed to disable the devfreq-event devices\n");
>>
>> - if (bus->regulator)
>> - regulator_disable(bus->regulator);
>> -
>> dev_pm_opp_of_remove_table(dev);
>> clk_disable_unprepare(bus->clk);
>> + if (bus->regulator)
>> + regulator_disable(bus->regulator);
>> }
>>
>> /*
>> @@ -386,6 +385,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
>> struct exynos_bus *bus;
>> int ret, max_state;
>> unsigned long min_freq, max_freq;
>> + bool passive = false;
>>
>> if (!np) {
>> dev_err(dev, "failed to find devicetree node\n");
>> @@ -399,27 +399,27 @@ static int exynos_bus_probe(struct platform_device *pdev)
>> bus->dev = &pdev->dev;
>> platform_set_drvdata(pdev, bus);
>>
>> - /* Parse the device-tree to get the resource information */
>> - ret = exynos_bus_parse_of(np, bus);
>> - if (ret < 0)
>> - return ret;
>> -
>> profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
>> - if (!profile) {
>> - ret = -ENOMEM;
>> - goto err;
>> - }
>> + if (!profile)
>> + return -ENOMEM;
>>
>> node = of_parse_phandle(dev->of_node, "devfreq", 0);
>> if (node) {
>> of_node_put(node);
>> - goto passive;
>> + passive = true;
>> } else {
>> ret = exynos_bus_parent_parse_of(np, bus);
>> + if (ret < 0)
>> + return ret;
>> }
>>
>> + /* Parse the device-tree to get the resource information */
>> + ret = exynos_bus_parse_of(np, bus);
>> if (ret < 0)
>> - goto err;
>> + goto err_reg;
>> +
>> + if (passive)
>> + goto passive;
>>
>> /* Initialize the struct profile and governor data for parent device */
>> profile->polling_ms = 50;
>> @@ -510,6 +510,9 @@ static int exynos_bus_probe(struct platform_device *pdev)
>> err:
>> dev_pm_opp_of_remove_table(dev);
>> clk_disable_unprepare(bus->clk);
>> +err_reg:
>> + if (!passive)
>> + regulator_disable(bus->regulator);
>>
>> return ret;
>> }
>> --
>> 2.22.0
>>
>
>
--
Best regards,
Kamil Konieczny
Samsung R&D Institute Poland