The mmc.txt didn't explicitly say disable-wp is for SD card slot only,
but that is what it was designed for in the first place.
Remove all disable-wp from emmc or sdio controllers.
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/boot/dts/rv1108-elgin-r1.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index 1c4507b..b1db924 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -37,7 +37,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
no-sd;
no-sdio;
non-removable;
--
2.11.0
On 2019/2/19 21:03, Johan Jonker wrote:
> The mmc.txt didn't explicitly say disable-wp is for SD card slot only,
> but that is what it was designed for in the first place.
> Remove all disable-wp from emmc or sdio controllers.
>
> Signed-off-by: Johan Jonker <[email protected]>
> ---
> arch/arm/boot/dts/rv1108-elgin-r1.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
> index 1c4507b..b1db924 100644
> --- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
> +++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
> @@ -37,7 +37,6 @@
> &emmc {
> bus-width = <8>;
> cap-mmc-highspeed;
> - disable-wp;
Reviewed-by: Shawn Lin <[email protected]>
> no-sd;
> no-sdio;
> non-removable;
>
The mmc.txt didn't explicitly say disable-wp is for SD card slot only,
but that is what it was designed for in the first place.
Remove all disable-wp from emmc or sdio controllers.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Shawn Lin <[email protected]>
---
arch/arm/boot/dts/rv1108-elgin-r1.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index 1c4507b66..b1db92471 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -37,7 +37,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
no-sd;
no-sdio;
non-removable;
--
2.11.0
Am Sonntag, 10. M?rz 2019, 16:19:28 CET schrieb Johan Jonker:
> The mmc.txt didn't explicitly say disable-wp is for SD card slot only,
> but that is what it was designed for in the first place.
> Remove all disable-wp from emmc or sdio controllers.
>
> Signed-off-by: Johan Jonker <[email protected]>
> Reviewed-by: Shawn Lin <[email protected]>
applied for 5.2
Thanks
Heiko