The X series Ingenic SoCs have a shadow GPIO group which is at a higher
offset than the other groups, and is used for all GPIO configuration.
The regmap did not take this offset into account and set max_register
too low, so the regmap API blocked writes to the shadow group, which
made the pinctrl driver unable to configure any pins.
Fix this by adding regmap access tables to the chip info.
Signed-off-by: Aidan MacDonald <[email protected]>
---
v1: https://lore.kernel.org/linux-mips/[email protected]/
drivers/pinctrl/pinctrl-ingenic.c | 53 ++++++++++++++++++++++++++++++-
1 file changed, 52 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 2712f51eb238..074c94edd90b 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -119,6 +119,9 @@ struct ingenic_chip_info {
unsigned int num_functions;
const u32 *pull_ups, *pull_downs;
+
+ unsigned int max_register;
+ const struct regmap_access_table* access_table;
};
struct ingenic_pinctrl {
@@ -228,6 +231,7 @@ static const struct ingenic_chip_info jz4730_chip_info = {
.num_functions = ARRAY_SIZE(jz4730_functions),
.pull_ups = jz4730_pull_ups,
.pull_downs = jz4730_pull_downs,
+ .max_register = 4 * 0x30 - 4,
};
static const u32 jz4740_pull_ups[4] = {
@@ -337,6 +341,7 @@ static const struct ingenic_chip_info jz4740_chip_info = {
.num_functions = ARRAY_SIZE(jz4740_functions),
.pull_ups = jz4740_pull_ups,
.pull_downs = jz4740_pull_downs,
+ .max_register = 4 * 0x100 - 4,
};
static int jz4725b_mmc0_1bit_pins[] = { 0x48, 0x49, 0x5c, };
@@ -439,6 +444,7 @@ static const struct ingenic_chip_info jz4725b_chip_info = {
.num_functions = ARRAY_SIZE(jz4725b_functions),
.pull_ups = jz4740_pull_ups,
.pull_downs = jz4740_pull_downs,
+ .max_register = 4 * 0x100 - 4,
};
static const u32 jz4750_pull_ups[6] = {
@@ -576,6 +582,7 @@ static const struct ingenic_chip_info jz4750_chip_info = {
.num_functions = ARRAY_SIZE(jz4750_functions),
.pull_ups = jz4750_pull_ups,
.pull_downs = jz4750_pull_downs,
+ .max_register = 6 * 0x100 - 4,
};
static const u32 jz4755_pull_ups[6] = {
@@ -741,6 +748,7 @@ static const struct ingenic_chip_info jz4755_chip_info = {
.num_functions = ARRAY_SIZE(jz4755_functions),
.pull_ups = jz4755_pull_ups,
.pull_downs = jz4755_pull_downs,
+ .max_register = 6 * 0x100 - 4,
};
static const u32 jz4760_pull_ups[6] = {
@@ -1089,6 +1097,7 @@ static const struct ingenic_chip_info jz4760_chip_info = {
.num_functions = ARRAY_SIZE(jz4760_functions),
.pull_ups = jz4760_pull_ups,
.pull_downs = jz4760_pull_downs,
+ .max_register = 6 * 0x100 - 4,
};
static const u32 jz4770_pull_ups[6] = {
@@ -1429,6 +1438,7 @@ static const struct ingenic_chip_info jz4770_chip_info = {
.num_functions = ARRAY_SIZE(jz4770_functions),
.pull_ups = jz4770_pull_ups,
.pull_downs = jz4770_pull_downs,
+ .max_register = 6 * 0x100 - 4,
};
static const u32 jz4775_pull_ups[7] = {
@@ -1702,6 +1712,7 @@ static const struct ingenic_chip_info jz4775_chip_info = {
.num_functions = ARRAY_SIZE(jz4775_functions),
.pull_ups = jz4775_pull_ups,
.pull_downs = jz4775_pull_downs,
+ .max_register = 7 * 0x100 - 4,
};
static const u32 jz4780_pull_ups[6] = {
@@ -1966,6 +1977,7 @@ static const struct ingenic_chip_info jz4780_chip_info = {
.num_functions = ARRAY_SIZE(jz4780_functions),
.pull_ups = jz4780_pull_ups,
.pull_downs = jz4780_pull_downs,
+ .max_register = 6 * 0x100 - 4,
};
static const u32 x1000_pull_ups[4] = {
@@ -2179,6 +2191,17 @@ static const struct function_desc x1000_functions[] = {
{ "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), },
};
+static const struct regmap_range x1000_access_ranges[] = {
+ regmap_reg_range(0x000, 0x400 - 4),
+ regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X1500 */
+static const struct regmap_access_table x1000_access_table = {
+ .yes_ranges = x1000_access_ranges,
+ .n_yes_ranges = ARRAY_SIZE(x1000_access_ranges),
+};
+
static const struct ingenic_chip_info x1000_chip_info = {
.num_chips = 4,
.reg_offset = 0x100,
@@ -2189,6 +2212,7 @@ static const struct ingenic_chip_info x1000_chip_info = {
.num_functions = ARRAY_SIZE(x1000_functions),
.pull_ups = x1000_pull_ups,
.pull_downs = x1000_pull_downs,
+ .access_table = &x1000_access_table,
};
static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
@@ -2300,6 +2324,7 @@ static const struct ingenic_chip_info x1500_chip_info = {
.num_functions = ARRAY_SIZE(x1500_functions),
.pull_ups = x1000_pull_ups,
.pull_downs = x1000_pull_downs,
+ .access_table = &x1000_access_table,
};
static const u32 x1830_pull_ups[4] = {
@@ -2506,6 +2531,16 @@ static const struct function_desc x1830_functions[] = {
{ "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
};
+static const struct regmap_range x1830_access_ranges[] = {
+ regmap_reg_range(0x0000, 0x4000 - 4),
+ regmap_reg_range(0x7000, 0x8000 - 4),
+};
+
+static const struct regmap_access_table x1830_access_table = {
+ .yes_ranges = x1830_access_ranges,
+ .n_yes_ranges = ARRAY_SIZE(x1830_access_ranges),
+};
+
static const struct ingenic_chip_info x1830_chip_info = {
.num_chips = 4,
.reg_offset = 0x1000,
@@ -2516,6 +2551,7 @@ static const struct ingenic_chip_info x1830_chip_info = {
.num_functions = ARRAY_SIZE(x1830_functions),
.pull_ups = x1830_pull_ups,
.pull_downs = x1830_pull_downs,
+ .access_table = &x1830_access_table,
};
static const u32 x2000_pull_ups[5] = {
@@ -2969,6 +3005,17 @@ static const struct function_desc x2000_functions[] = {
{ "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
};
+static const struct regmap_range x2000_access_ranges[] = {
+ regmap_reg_range(0x000, 0x500 - 4),
+ regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X2100 */
+static const struct regmap_access_table x2000_access_table = {
+ .yes_ranges = x2000_access_ranges,
+ .n_yes_ranges = ARRAY_SIZE(x2000_access_ranges),
+};
+
static const struct ingenic_chip_info x2000_chip_info = {
.num_chips = 5,
.reg_offset = 0x100,
@@ -2979,6 +3026,7 @@ static const struct ingenic_chip_info x2000_chip_info = {
.num_functions = ARRAY_SIZE(x2000_functions),
.pull_ups = x2000_pull_ups,
.pull_downs = x2000_pull_downs,
+ .access_table = &x2000_access_table,
};
static const u32 x2100_pull_ups[5] = {
@@ -3189,6 +3237,7 @@ static const struct ingenic_chip_info x2100_chip_info = {
.num_functions = ARRAY_SIZE(x2100_functions),
.pull_ups = x2100_pull_ups,
.pull_downs = x2100_pull_downs,
+ .access_table = &x2000_access_table,
};
static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
@@ -4168,7 +4217,9 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
return PTR_ERR(base);
regmap_config = ingenic_pinctrl_regmap_config;
- regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset;
+ regmap_config.rd_table = chip_info->access_table;
+ regmap_config.wr_table = chip_info->access_table;
+ regmap_config.max_register = chip_info->max_register;
jzpc->map = devm_regmap_init_mmio(dev, base, ®map_config);
if (IS_ERR(jzpc->map)) {
--
2.34.1
Hi Aidan,
Le jeu., f?vr. 24 2022 at 14:58:22 +0000, Aidan MacDonald
<[email protected]> a ?crit :
> The X series Ingenic SoCs have a shadow GPIO group which is at a
> higher
> offset than the other groups, and is used for all GPIO configuration.
> The regmap did not take this offset into account and set max_register
> too low, so the regmap API blocked writes to the shadow group, which
> made the pinctrl driver unable to configure any pins.
>
> Fix this by adding regmap access tables to the chip info.
>
> Signed-off-by: Aidan MacDonald <[email protected]>
> ---
> v1:
> https://lore.kernel.org/linux-mips/[email protected]/
>
> drivers/pinctrl/pinctrl-ingenic.c | 53
> ++++++++++++++++++++++++++++++-
> 1 file changed, 52 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/pinctrl-ingenic.c
> b/drivers/pinctrl/pinctrl-ingenic.c
> index 2712f51eb238..074c94edd90b 100644
> --- a/drivers/pinctrl/pinctrl-ingenic.c
> +++ b/drivers/pinctrl/pinctrl-ingenic.c
> @@ -119,6 +119,9 @@ struct ingenic_chip_info {
> unsigned int num_functions;
>
> const u32 *pull_ups, *pull_downs;
> +
> + unsigned int max_register;
> + const struct regmap_access_table* access_table;
> };
>
> struct ingenic_pinctrl {
> @@ -228,6 +231,7 @@ static const struct ingenic_chip_info
> jz4730_chip_info = {
> .num_functions = ARRAY_SIZE(jz4730_functions),
> .pull_ups = jz4730_pull_ups,
> .pull_downs = jz4730_pull_downs,
> + .max_register = 4 * 0x30 - 4,
> };
>
> static const u32 jz4740_pull_ups[4] = {
> @@ -337,6 +341,7 @@ static const struct ingenic_chip_info
> jz4740_chip_info = {
> .num_functions = ARRAY_SIZE(jz4740_functions),
> .pull_ups = jz4740_pull_ups,
> .pull_downs = jz4740_pull_downs,
> + .max_register = 4 * 0x100 - 4,
> };
>
> static int jz4725b_mmc0_1bit_pins[] = { 0x48, 0x49, 0x5c, };
> @@ -439,6 +444,7 @@ static const struct ingenic_chip_info
> jz4725b_chip_info = {
> .num_functions = ARRAY_SIZE(jz4725b_functions),
> .pull_ups = jz4740_pull_ups,
> .pull_downs = jz4740_pull_downs,
> + .max_register = 4 * 0x100 - 4,
> };
>
> static const u32 jz4750_pull_ups[6] = {
> @@ -576,6 +582,7 @@ static const struct ingenic_chip_info
> jz4750_chip_info = {
> .num_functions = ARRAY_SIZE(jz4750_functions),
> .pull_ups = jz4750_pull_ups,
> .pull_downs = jz4750_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4755_pull_ups[6] = {
> @@ -741,6 +748,7 @@ static const struct ingenic_chip_info
> jz4755_chip_info = {
> .num_functions = ARRAY_SIZE(jz4755_functions),
> .pull_ups = jz4755_pull_ups,
> .pull_downs = jz4755_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4760_pull_ups[6] = {
> @@ -1089,6 +1097,7 @@ static const struct ingenic_chip_info
> jz4760_chip_info = {
> .num_functions = ARRAY_SIZE(jz4760_functions),
> .pull_ups = jz4760_pull_ups,
> .pull_downs = jz4760_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4770_pull_ups[6] = {
> @@ -1429,6 +1438,7 @@ static const struct ingenic_chip_info
> jz4770_chip_info = {
> .num_functions = ARRAY_SIZE(jz4770_functions),
> .pull_ups = jz4770_pull_ups,
> .pull_downs = jz4770_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4775_pull_ups[7] = {
> @@ -1702,6 +1712,7 @@ static const struct ingenic_chip_info
> jz4775_chip_info = {
> .num_functions = ARRAY_SIZE(jz4775_functions),
> .pull_ups = jz4775_pull_ups,
> .pull_downs = jz4775_pull_downs,
> + .max_register = 7 * 0x100 - 4,
> };
>
> static const u32 jz4780_pull_ups[6] = {
> @@ -1966,6 +1977,7 @@ static const struct ingenic_chip_info
> jz4780_chip_info = {
> .num_functions = ARRAY_SIZE(jz4780_functions),
> .pull_ups = jz4780_pull_ups,
> .pull_downs = jz4780_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 x1000_pull_ups[4] = {
> @@ -2179,6 +2191,17 @@ static const struct function_desc
> x1000_functions[] = {
> { "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), },
> };
>
> +static const struct regmap_range x1000_access_ranges[] = {
> + regmap_reg_range(0x000, 0x400 - 4),
> + regmap_reg_range(0x700, 0x800 - 4),
> +};
> +
> +/* shared with X1500 */
> +static const struct regmap_access_table x1000_access_table = {
> + .yes_ranges = x1000_access_ranges,
> + .n_yes_ranges = ARRAY_SIZE(x1000_access_ranges),
> +};
> +
> static const struct ingenic_chip_info x1000_chip_info = {
> .num_chips = 4,
> .reg_offset = 0x100,
> @@ -2189,6 +2212,7 @@ static const struct ingenic_chip_info
> x1000_chip_info = {
> .num_functions = ARRAY_SIZE(x1000_functions),
> .pull_ups = x1000_pull_ups,
> .pull_downs = x1000_pull_downs,
> + .access_table = &x1000_access_table,
> };
>
> static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
> @@ -2300,6 +2324,7 @@ static const struct ingenic_chip_info
> x1500_chip_info = {
> .num_functions = ARRAY_SIZE(x1500_functions),
> .pull_ups = x1000_pull_ups,
> .pull_downs = x1000_pull_downs,
> + .access_table = &x1000_access_table,
> };
>
> static const u32 x1830_pull_ups[4] = {
> @@ -2506,6 +2531,16 @@ static const struct function_desc
> x1830_functions[] = {
> { "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
> };
>
> +static const struct regmap_range x1830_access_ranges[] = {
> + regmap_reg_range(0x0000, 0x4000 - 4),
> + regmap_reg_range(0x7000, 0x8000 - 4),
> +};
> +
> +static const struct regmap_access_table x1830_access_table = {
> + .yes_ranges = x1830_access_ranges,
> + .n_yes_ranges = ARRAY_SIZE(x1830_access_ranges),
> +};
> +
> static const struct ingenic_chip_info x1830_chip_info = {
> .num_chips = 4,
> .reg_offset = 0x1000,
> @@ -2516,6 +2551,7 @@ static const struct ingenic_chip_info
> x1830_chip_info = {
> .num_functions = ARRAY_SIZE(x1830_functions),
> .pull_ups = x1830_pull_ups,
> .pull_downs = x1830_pull_downs,
> + .access_table = &x1830_access_table,
> };
>
> static const u32 x2000_pull_ups[5] = {
> @@ -2969,6 +3005,17 @@ static const struct function_desc
> x2000_functions[] = {
> { "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
> };
>
> +static const struct regmap_range x2000_access_ranges[] = {
> + regmap_reg_range(0x000, 0x500 - 4),
> + regmap_reg_range(0x700, 0x800 - 4),
> +};
> +
> +/* shared with X2100 */
> +static const struct regmap_access_table x2000_access_table = {
> + .yes_ranges = x2000_access_ranges,
> + .n_yes_ranges = ARRAY_SIZE(x2000_access_ranges),
> +};
> +
> static const struct ingenic_chip_info x2000_chip_info = {
> .num_chips = 5,
> .reg_offset = 0x100,
> @@ -2979,6 +3026,7 @@ static const struct ingenic_chip_info
> x2000_chip_info = {
> .num_functions = ARRAY_SIZE(x2000_functions),
> .pull_ups = x2000_pull_ups,
> .pull_downs = x2000_pull_downs,
> + .access_table = &x2000_access_table,
> };
>
> static const u32 x2100_pull_ups[5] = {
> @@ -3189,6 +3237,7 @@ static const struct ingenic_chip_info
> x2100_chip_info = {
> .num_functions = ARRAY_SIZE(x2100_functions),
> .pull_ups = x2100_pull_ups,
> .pull_downs = x2100_pull_downs,
> + .access_table = &x2000_access_table,
> };
>
> static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8
> reg)
> @@ -4168,7 +4217,9 @@ static int __init ingenic_pinctrl_probe(struct
> platform_device *pdev)
> return PTR_ERR(base);
>
> regmap_config = ingenic_pinctrl_regmap_config;
> - regmap_config.max_register = chip_info->num_chips *
> chip_info->reg_offset;
> + regmap_config.rd_table = chip_info->access_table;
> + regmap_config.wr_table = chip_info->access_table;
> + regmap_config.max_register = chip_info->max_register;
You could do something like this:
if (chip_info->access_table) {
regmap_config.rd_table = chip_info->access_table;
regmap_config.wr_table = chip_info->access_table;
} else {
regmap_config.max_register = chip_info->num_chips *
chip_info->reg_offset;
}
Then you wouldn't need to add a .max_register field for every other SoC.
Cheers,
-Paul
>
> jzpc->map = devm_regmap_init_mmio(dev, base, ®map_config);
> if (IS_ERR(jzpc->map)) {
> --
> 2.34.1
>
Hi Aidan,
On 2022/2/24 下午10:58, Aidan MacDonald wrote:
> The X series Ingenic SoCs have a shadow GPIO group which is at a higher
> offset than the other groups, and is used for all GPIO configuration.
> The regmap did not take this offset into account and set max_register
> too low, so the regmap API blocked writes to the shadow group, which
> made the pinctrl driver unable to configure any pins.
>
> Fix this by adding regmap access tables to the chip info.
>
> Signed-off-by: Aidan MacDonald <[email protected]>
> ---
> v1: https://lore.kernel.org/linux-mips/[email protected]/
>
> drivers/pinctrl/pinctrl-ingenic.c | 53 ++++++++++++++++++++++++++++++-
> 1 file changed, 52 insertions(+), 1 deletion(-)
Tested-by: 周琰杰 (Zhou Yanjie) <[email protected]>
>
> diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
> index 2712f51eb238..074c94edd90b 100644
> --- a/drivers/pinctrl/pinctrl-ingenic.c
> +++ b/drivers/pinctrl/pinctrl-ingenic.c
> @@ -119,6 +119,9 @@ struct ingenic_chip_info {
> unsigned int num_functions;
>
> const u32 *pull_ups, *pull_downs;
> +
> + unsigned int max_register;
> + const struct regmap_access_table* access_table;
> };
>
> struct ingenic_pinctrl {
> @@ -228,6 +231,7 @@ static const struct ingenic_chip_info jz4730_chip_info = {
> .num_functions = ARRAY_SIZE(jz4730_functions),
> .pull_ups = jz4730_pull_ups,
> .pull_downs = jz4730_pull_downs,
> + .max_register = 4 * 0x30 - 4,
> };
>
> static const u32 jz4740_pull_ups[4] = {
> @@ -337,6 +341,7 @@ static const struct ingenic_chip_info jz4740_chip_info = {
> .num_functions = ARRAY_SIZE(jz4740_functions),
> .pull_ups = jz4740_pull_ups,
> .pull_downs = jz4740_pull_downs,
> + .max_register = 4 * 0x100 - 4,
> };
>
> static int jz4725b_mmc0_1bit_pins[] = { 0x48, 0x49, 0x5c, };
> @@ -439,6 +444,7 @@ static const struct ingenic_chip_info jz4725b_chip_info = {
> .num_functions = ARRAY_SIZE(jz4725b_functions),
> .pull_ups = jz4740_pull_ups,
> .pull_downs = jz4740_pull_downs,
> + .max_register = 4 * 0x100 - 4,
> };
>
> static const u32 jz4750_pull_ups[6] = {
> @@ -576,6 +582,7 @@ static const struct ingenic_chip_info jz4750_chip_info = {
> .num_functions = ARRAY_SIZE(jz4750_functions),
> .pull_ups = jz4750_pull_ups,
> .pull_downs = jz4750_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4755_pull_ups[6] = {
> @@ -741,6 +748,7 @@ static const struct ingenic_chip_info jz4755_chip_info = {
> .num_functions = ARRAY_SIZE(jz4755_functions),
> .pull_ups = jz4755_pull_ups,
> .pull_downs = jz4755_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4760_pull_ups[6] = {
> @@ -1089,6 +1097,7 @@ static const struct ingenic_chip_info jz4760_chip_info = {
> .num_functions = ARRAY_SIZE(jz4760_functions),
> .pull_ups = jz4760_pull_ups,
> .pull_downs = jz4760_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4770_pull_ups[6] = {
> @@ -1429,6 +1438,7 @@ static const struct ingenic_chip_info jz4770_chip_info = {
> .num_functions = ARRAY_SIZE(jz4770_functions),
> .pull_ups = jz4770_pull_ups,
> .pull_downs = jz4770_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4775_pull_ups[7] = {
> @@ -1702,6 +1712,7 @@ static const struct ingenic_chip_info jz4775_chip_info = {
> .num_functions = ARRAY_SIZE(jz4775_functions),
> .pull_ups = jz4775_pull_ups,
> .pull_downs = jz4775_pull_downs,
> + .max_register = 7 * 0x100 - 4,
> };
>
> static const u32 jz4780_pull_ups[6] = {
> @@ -1966,6 +1977,7 @@ static const struct ingenic_chip_info jz4780_chip_info = {
> .num_functions = ARRAY_SIZE(jz4780_functions),
> .pull_ups = jz4780_pull_ups,
> .pull_downs = jz4780_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 x1000_pull_ups[4] = {
> @@ -2179,6 +2191,17 @@ static const struct function_desc x1000_functions[] = {
> { "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), },
> };
>
> +static const struct regmap_range x1000_access_ranges[] = {
> + regmap_reg_range(0x000, 0x400 - 4),
> + regmap_reg_range(0x700, 0x800 - 4),
> +};
> +
> +/* shared with X1500 */
> +static const struct regmap_access_table x1000_access_table = {
> + .yes_ranges = x1000_access_ranges,
> + .n_yes_ranges = ARRAY_SIZE(x1000_access_ranges),
> +};
> +
> static const struct ingenic_chip_info x1000_chip_info = {
> .num_chips = 4,
> .reg_offset = 0x100,
> @@ -2189,6 +2212,7 @@ static const struct ingenic_chip_info x1000_chip_info = {
> .num_functions = ARRAY_SIZE(x1000_functions),
> .pull_ups = x1000_pull_ups,
> .pull_downs = x1000_pull_downs,
> + .access_table = &x1000_access_table,
> };
>
> static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
> @@ -2300,6 +2324,7 @@ static const struct ingenic_chip_info x1500_chip_info = {
> .num_functions = ARRAY_SIZE(x1500_functions),
> .pull_ups = x1000_pull_ups,
> .pull_downs = x1000_pull_downs,
> + .access_table = &x1000_access_table,
> };
>
> static const u32 x1830_pull_ups[4] = {
> @@ -2506,6 +2531,16 @@ static const struct function_desc x1830_functions[] = {
> { "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
> };
>
> +static const struct regmap_range x1830_access_ranges[] = {
> + regmap_reg_range(0x0000, 0x4000 - 4),
> + regmap_reg_range(0x7000, 0x8000 - 4),
> +};
> +
> +static const struct regmap_access_table x1830_access_table = {
> + .yes_ranges = x1830_access_ranges,
> + .n_yes_ranges = ARRAY_SIZE(x1830_access_ranges),
> +};
> +
> static const struct ingenic_chip_info x1830_chip_info = {
> .num_chips = 4,
> .reg_offset = 0x1000,
> @@ -2516,6 +2551,7 @@ static const struct ingenic_chip_info x1830_chip_info = {
> .num_functions = ARRAY_SIZE(x1830_functions),
> .pull_ups = x1830_pull_ups,
> .pull_downs = x1830_pull_downs,
> + .access_table = &x1830_access_table,
> };
>
> static const u32 x2000_pull_ups[5] = {
> @@ -2969,6 +3005,17 @@ static const struct function_desc x2000_functions[] = {
> { "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
> };
>
> +static const struct regmap_range x2000_access_ranges[] = {
> + regmap_reg_range(0x000, 0x500 - 4),
> + regmap_reg_range(0x700, 0x800 - 4),
> +};
> +
> +/* shared with X2100 */
> +static const struct regmap_access_table x2000_access_table = {
> + .yes_ranges = x2000_access_ranges,
> + .n_yes_ranges = ARRAY_SIZE(x2000_access_ranges),
> +};
> +
> static const struct ingenic_chip_info x2000_chip_info = {
> .num_chips = 5,
> .reg_offset = 0x100,
> @@ -2979,6 +3026,7 @@ static const struct ingenic_chip_info x2000_chip_info = {
> .num_functions = ARRAY_SIZE(x2000_functions),
> .pull_ups = x2000_pull_ups,
> .pull_downs = x2000_pull_downs,
> + .access_table = &x2000_access_table,
> };
>
> static const u32 x2100_pull_ups[5] = {
> @@ -3189,6 +3237,7 @@ static const struct ingenic_chip_info x2100_chip_info = {
> .num_functions = ARRAY_SIZE(x2100_functions),
> .pull_ups = x2100_pull_ups,
> .pull_downs = x2100_pull_downs,
> + .access_table = &x2000_access_table,
> };
>
> static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
> @@ -4168,7 +4217,9 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
> return PTR_ERR(base);
>
> regmap_config = ingenic_pinctrl_regmap_config;
> - regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset;
> + regmap_config.rd_table = chip_info->access_table;
> + regmap_config.wr_table = chip_info->access_table;
> + regmap_config.max_register = chip_info->max_register;
>
> jzpc->map = devm_regmap_init_mmio(dev, base, ®map_config);
> if (IS_ERR(jzpc->map)) {