Implement PIT64B selection thus it will be available for the necessary
targets (at the moment SAM9X60 and SAMA7G5) w/o the necessity to
specify it via defconfig. With this the current CONFIG_TIMER_OF
dependency of PIT64B driver could be removed. Along with changes
on AT91 Kconfig removed CONFIG_MICROCHIP_PIT64B from defconfigs.
Signed-off-by: Claudiu Beznea <[email protected]>
---
arch/arm/configs/at91_dt_defconfig | 1 -
arch/arm/configs/multi_v7_defconfig | 1 -
arch/arm/configs/sama7_defconfig | 1 -
arch/arm/mach-at91/Kconfig | 9 +++++++++
4 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 549d01be0b47..04f71dac9c97 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -195,7 +195,6 @@ CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
CONFIG_AT_XDMAC=y
-CONFIG_MICROCHIP_PIT64B=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 8863fa969ede..bec62d5aa3c6 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -989,7 +989,6 @@ CONFIG_APQ_MMCC_8084=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
-CONFIG_MICROCHIP_PIT64B=y
CONFIG_BCM2835_MBOX=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_TEGRA_IOMMU_GART=y
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 07b0494ef743..2b0f020a18eb 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -182,7 +182,6 @@ CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_DMADEVICES=y
CONFIG_AT_XDMAC=y
CONFIG_STAGING=y
-CONFIG_MICROCHIP_PIT64B=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_IIO_SW_TRIGGER=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 279810381256..1531b4625c76 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -165,6 +165,15 @@ config ATMEL_CLOCKSOURCE_TCB
to make a single 32-bit timer.
It can also be used as a clock event device supporting oneshot mode.
+config MICROCHIP_CLOCKSOURCE_PIT64B
+ bool "64-bit Periodic Interval Timer (PIT64B) support"
+ default SOC_SAM9X60 || SOC_SAMA7
+ select MICROCHIP_PIT64B
+ help
+ Select this to get a high resolution clockevent (SAM9X60) or
+ clocksource and clockevent (SAMA7G5) based on Microchip 64-bit
+ Periodic Interval Timer.
+
config HAVE_AT91_UTMI
bool
--
2.32.0
On 09/03/2022 at 11:08, Claudiu Beznea wrote:
> Implement PIT64B selection thus it will be available for the necessary
> targets (at the moment SAM9X60 and SAMA7G5) w/o the necessity to
> specify it via defconfig. With this the current CONFIG_TIMER_OF
> dependency of PIT64B driver could be removed. Along with changes
> on AT91 Kconfig removed CONFIG_MICROCHIP_PIT64B from defconfigs.
>
> Signed-off-by: Claudiu Beznea <[email protected]>
> ---
> arch/arm/configs/at91_dt_defconfig | 1 -
> arch/arm/configs/multi_v7_defconfig | 1 -
> arch/arm/configs/sama7_defconfig | 1 -
> arch/arm/mach-at91/Kconfig | 9 +++++++++
Hi Claudiu,
To match arm-soc flow, this probably would need to be spit in 2 patches:
one for the Kconfig changes. Then, when it's integrated, we shall queue
the other defconfig changes (having them around even with the Kconfig
change doesn't harm).
I let you do this change. Best regards,
Nicolas
> 4 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
> index 549d01be0b47..04f71dac9c97 100644
> --- a/arch/arm/configs/at91_dt_defconfig
> +++ b/arch/arm/configs/at91_dt_defconfig
> @@ -195,7 +195,6 @@ CONFIG_RTC_DRV_AT91SAM9=y
> CONFIG_DMADEVICES=y
> CONFIG_AT_HDMAC=y
> CONFIG_AT_XDMAC=y
> -CONFIG_MICROCHIP_PIT64B=y
> # CONFIG_IOMMU_SUPPORT is not set
> CONFIG_IIO=y
> CONFIG_AT91_ADC=y
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index 8863fa969ede..bec62d5aa3c6 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -989,7 +989,6 @@ CONFIG_APQ_MMCC_8084=y
> CONFIG_MSM_GCC_8660=y
> CONFIG_MSM_MMCC_8960=y
> CONFIG_MSM_MMCC_8974=y
> -CONFIG_MICROCHIP_PIT64B=y
> CONFIG_BCM2835_MBOX=y
> CONFIG_ROCKCHIP_IOMMU=y
> CONFIG_TEGRA_IOMMU_GART=y
> diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
> index 07b0494ef743..2b0f020a18eb 100644
> --- a/arch/arm/configs/sama7_defconfig
> +++ b/arch/arm/configs/sama7_defconfig
> @@ -182,7 +182,6 @@ CONFIG_RTC_DRV_AT91SAM9=y
> CONFIG_DMADEVICES=y
> CONFIG_AT_XDMAC=y
> CONFIG_STAGING=y
> -CONFIG_MICROCHIP_PIT64B=y
> # CONFIG_IOMMU_SUPPORT is not set
> CONFIG_IIO=y
> CONFIG_IIO_SW_TRIGGER=y
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 279810381256..1531b4625c76 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -165,6 +165,15 @@ config ATMEL_CLOCKSOURCE_TCB
> to make a single 32-bit timer.
> It can also be used as a clock event device supporting oneshot mode.
>
> +config MICROCHIP_CLOCKSOURCE_PIT64B
> + bool "64-bit Periodic Interval Timer (PIT64B) support"
> + default SOC_SAM9X60 || SOC_SAMA7
> + select MICROCHIP_PIT64B
> + help
> + Select this to get a high resolution clockevent (SAM9X60) or
> + clocksource and clockevent (SAMA7G5) based on Microchip 64-bit
> + Periodic Interval Timer.
> +
> config HAVE_AT91_UTMI
> bool
>
--
Nicolas Ferre