Hi!
Today I got this... IIRC I was told it was fixed already...?
Pavel
ehci_hcd 0000:00:1d.7: suspend root hub
EXT3 FS on sda4, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-1.ucode
iwl3945 0000:03:00.0: Loaded firmware iwlwifi-3945-1.ucode, which is deprecated. Please use API v2 instead.
iwl3945 0000:03:00.0: Firmware has old API version. Expected 2, got 1. New firmware can be obtained from http://www.intellinuxwireless.org.
iwl3945 0000:03:00.0: loaded firmware version 15.28.1.8
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
coda_read_super: Bad mount data
coda_read_super: device index: 0
coda_read_super: rootfid is (01234567.ffffffff.08051b10.00000000)
coda: Unexpected interruption.
Failure of coda_cnode_make for root: error -4
CE: hpet increasing min_delta_ns to 15000 nsec
CE: hpet increasing min_delta_ns to 22500 nsec
uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
Pid: 30385, comm: ps Not tainted 2.6.32-rc5-00154-gfbad3ad-dirty #83
Call Trace:
[<c0791da9>] ? printk+0x18/0x1a
[<c0255492>] __lock_acquire+0x4a2/0xad0
[<c0255b28>] lock_acquire+0x68/0x90
[<c06733bd>] ? skb_dequeue+0x1d/0x70
[<c0794e0b>] _spin_lock_irqsave+0x3b/0x50
[<c06733bd>] ? skb_dequeue+0x1d/0x70
[<c06733bd>] skb_dequeue+0x1d/0x70
[<c0674034>] skb_queue_purge+0x14/0x20
[<c07139a7>] l2cap_recv_frame+0x5d7/0x3270
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c06732c9>] ? skb_queue_tail+0x39/0x50
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c050cd50>] ? usb_submit_urb+0x140/0x360
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c07167d2>] l2cap_recv_acldata+0x192/0x3d0
[<c07079b8>] ? hci_rx_task+0x268/0x440
[<c0716640>] ? l2cap_recv_acldata+0x0/0x3d0
[<c07079e5>] hci_rx_task+0x295/0x440
[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
[<c0235b30>] tasklet_action+0x50/0xb0
[<c0236275>] __do_softirq+0x85/0x110
[<c023632d>] do_softirq+0x2d/0x40
[<c0236495>] irq_exit+0x65/0x80
[<c0204bbf>] do_IRQ+0x4f/0xc0
[<c02034a9>] common_interrupt+0x29/0x30
[<c0794a2f>] ? _write_unlock_irq+0x1f/0x30
[<c023474f>] do_exit+0x3df/0x650
[<c021bdc2>] ? do_page_fault+0x152/0x240
[<c02349f3>] do_group_exit+0x33/0x90
[<c0234a63>] sys_exit_group+0x13/0x20
[<c0202e50>] sysenter_do_call+0x12/0x31
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:02:00.0: eth0: 10/100 speed: disabling TSO
hci_acl_tx_to: hci0 ACL tx timeout
hci_acl_tx_to: hci0 killing stalled ACL connection 80:09:6E:BA:21:00
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Fri, Oct 30, 2009 at 2:16 PM, Pavel Machek <[email protected]> wrote:
> Hi!
>
> Today I got this... IIRC I was told it was fixed already...?
Hi, this looks like another case. Can you tell the way to reproduce?
>
> Pavel
>
> ehci_hcd 0000:00:1d.7: suspend root hub
> EXT3 FS on sda4, internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
> iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
> iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-1.ucode
> iwl3945 0000:03:00.0: Loaded firmware iwlwifi-3945-1.ucode, which is deprecated. Please use API v2 instead.
> iwl3945 0000:03:00.0: Firmware has old API version. Expected 2, got 1. New firmware can be obtained from http://www.intellinuxwireless.org.
> iwl3945 0000:03:00.0: loaded firmware version 15.28.1.8
> Registered led device: iwl-phy0::radio
> Registered led device: iwl-phy0::assoc
> Registered led device: iwl-phy0::RX
> Registered led device: iwl-phy0::TX
> coda_read_super: Bad mount data
> coda_read_super: device index: 0
> coda_read_super: rootfid is (01234567.ffffffff.08051b10.00000000)
> coda: Unexpected interruption.
> Failure of coda_cnode_make for root: error -4
> CE: hpet increasing min_delta_ns to 15000 nsec
> CE: hpet increasing min_delta_ns to 22500 nsec
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
> INFO: trying to register non-static key.
> the code is fine but needs lockdep annotation.
> turning off the locking correctness validator.
> Pid: 30385, comm: ps Not tainted 2.6.32-rc5-00154-gfbad3ad-dirty #83
> Call Trace:
> [<c0791da9>] ? printk+0x18/0x1a
> [<c0255492>] __lock_acquire+0x4a2/0xad0
> [<c0255b28>] lock_acquire+0x68/0x90
> [<c06733bd>] ? skb_dequeue+0x1d/0x70
> [<c0794e0b>] _spin_lock_irqsave+0x3b/0x50
> [<c06733bd>] ? skb_dequeue+0x1d/0x70
> [<c06733bd>] skb_dequeue+0x1d/0x70
> [<c0674034>] skb_queue_purge+0x14/0x20
> [<c07139a7>] l2cap_recv_frame+0x5d7/0x3270
> [<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> [<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> [<c06732c9>] ? skb_queue_tail+0x39/0x50
> [<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> [<c050cd50>] ? usb_submit_urb+0x140/0x360
> [<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> [<c07167d2>] l2cap_recv_acldata+0x192/0x3d0
> [<c07079b8>] ? hci_rx_task+0x268/0x440
> [<c0716640>] ? l2cap_recv_acldata+0x0/0x3d0
> [<c07079e5>] hci_rx_task+0x295/0x440
> [<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> [<c0235b30>] tasklet_action+0x50/0xb0
> [<c0236275>] __do_softirq+0x85/0x110
> [<c023632d>] do_softirq+0x2d/0x40
> [<c0236495>] irq_exit+0x65/0x80
> [<c0204bbf>] do_IRQ+0x4f/0xc0
> [<c02034a9>] common_interrupt+0x29/0x30
> [<c0794a2f>] ? _write_unlock_irq+0x1f/0x30
> [<c023474f>] do_exit+0x3df/0x650
> [<c021bdc2>] ? do_page_fault+0x152/0x240
> [<c02349f3>] do_group_exit+0x33/0x90
> [<c0234a63>] sys_exit_group+0x13/0x20
> [<c0202e50>] sysenter_do_call+0x12/0x31
> e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
> 0000:02:00.0: eth0: 10/100 speed: disabling TSO
> hci_acl_tx_to: hci0 ACL tx timeout
> hci_acl_tx_to: hci0 killing stalled ACL connection 80:09:6E:BA:21:00
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Regards
dave
On Wed 2009-11-04 09:01:20, Dave Young wrote:
> On Fri, Oct 30, 2009 at 2:16 PM, Pavel Machek <[email protected]> wrote:
> > Hi!
> >
> > Today I got this... IIRC I was told it was fixed already...?
>
> Hi, this looks like another case. Can you tell the way to
> reproduce?
Well, repeatedly start/stop bluetooth connecting script in attempt to
get PC <-> android tethering to work :-(. So no, I do not think I can
reproduce this easily.
Pavel
> > ehci_hcd 0000:00:1d.7: suspend root hub
> > EXT3 FS on sda4, internal journal
> > kjournald starting. ?Commit interval 5 seconds
> > EXT3 FS on sda2, internal journal
> > EXT3-fs: mounted filesystem with ordered data mode.
> > iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
> > iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
> > iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-1.ucode
> > iwl3945 0000:03:00.0: Loaded firmware iwlwifi-3945-1.ucode, which is deprecated. ?Please use API v2 instead.
> > iwl3945 0000:03:00.0: Firmware has old API version. Expected 2, got 1. New firmware can be obtained from http://www.intellinuxwireless.org.
> > iwl3945 0000:03:00.0: loaded firmware version 15.28.1.8
> > Registered led device: iwl-phy0::radio
> > Registered led device: iwl-phy0::assoc
> > Registered led device: iwl-phy0::RX
> > Registered led device: iwl-phy0::TX
> > coda_read_super: Bad mount data
> > coda_read_super: device index: 0
> > coda_read_super: rootfid is (01234567.ffffffff.08051b10.00000000)
> > coda: Unexpected interruption.
> > Failure of coda_cnode_make for root: error -4
> > CE: hpet increasing min_delta_ns to 15000 nsec
> > CE: hpet increasing min_delta_ns to 22500 nsec
> > uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
> > INFO: trying to register non-static key.
> > the code is fine but needs lockdep annotation.
> > turning off the locking correctness validator.
> > Pid: 30385, comm: ps Not tainted 2.6.32-rc5-00154-gfbad3ad-dirty #83
> > Call Trace:
> > ?[<c0791da9>] ? printk+0x18/0x1a
> > ?[<c0255492>] __lock_acquire+0x4a2/0xad0
> > ?[<c0255b28>] lock_acquire+0x68/0x90
> > ?[<c06733bd>] ? skb_dequeue+0x1d/0x70
> > ?[<c0794e0b>] _spin_lock_irqsave+0x3b/0x50
> > ?[<c06733bd>] ? skb_dequeue+0x1d/0x70
> > ?[<c06733bd>] skb_dequeue+0x1d/0x70
> > ?[<c0674034>] skb_queue_purge+0x14/0x20
> > ?[<c07139a7>] l2cap_recv_frame+0x5d7/0x3270
> > ?[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> > ?[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> > ?[<c06732c9>] ? skb_queue_tail+0x39/0x50
> > ?[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> > ?[<c050cd50>] ? usb_submit_urb+0x140/0x360
> > ?[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> > ?[<c07167d2>] l2cap_recv_acldata+0x192/0x3d0
> > ?[<c07079b8>] ? hci_rx_task+0x268/0x440
> > ?[<c0716640>] ? l2cap_recv_acldata+0x0/0x3d0
> > ?[<c07079e5>] hci_rx_task+0x295/0x440
> > ?[<c02551e5>] ? __lock_acquire+0x1f5/0xad0
> > ?[<c0235b30>] tasklet_action+0x50/0xb0
> > ?[<c0236275>] __do_softirq+0x85/0x110
> > ?[<c023632d>] do_softirq+0x2d/0x40
> > ?[<c0236495>] irq_exit+0x65/0x80
> > ?[<c0204bbf>] do_IRQ+0x4f/0xc0
> > ?[<c02034a9>] common_interrupt+0x29/0x30
> > ?[<c0794a2f>] ? _write_unlock_irq+0x1f/0x30
> > ?[<c023474f>] do_exit+0x3df/0x650
> > ?[<c021bdc2>] ? do_page_fault+0x152/0x240
> > ?[<c02349f3>] do_group_exit+0x33/0x90
> > ?[<c0234a63>] sys_exit_group+0x13/0x20
> > ?[<c0202e50>] sysenter_do_call+0x12/0x31
> > e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
> > 0000:02:00.0: eth0: 10/100 speed: disabling TSO
> > hci_acl_tx_to: hci0 ACL tx timeout
> > hci_acl_tx_to: hci0 killing stalled ACL connection 80:09:6E:BA:21:00
> >
> > --
> > (english) http://www.livejournal.com/~pavelmachek
> > (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> > the body of a message to [email protected]
> > More majordomo info at ?http://vger.kernel.org/majordomo-info.html
> >
>
>
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html