Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC
configurations, its presence makes arch/powerpc/kvm/Makefile to select
modules which do not build in such configuration.
The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists
only with CONFIG_PPC_BOOK3S_64. However these modules are selected when
COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures:
In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0,
from arch/powerpc/kvm/book3s_64_vio_hv.c:22:
arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror]
#define _PAGE_EXEC 0x00001 /* execute permission */
In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0,
from arch/powerpc/include/asm/book3s/pgtable.h:8,
from arch/powerpc/include/asm/pgtable.h:18,
from include/linux/mm.h:95,
from arch/powerpc/include/asm/io.h:29,
from include/linux/io.h:13,
from include/linux/irq.h:20,
from arch/powerpc/include/asm/hardirq.h:6,
from include/linux/hardirq.h:9,
from include/linux/kvm_host.h:7,
from arch/powerpc/kvm/book3s_64_vio_hv.c:12:
arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition
#define _PAGE_EXEC 0x200 /* software: exec allowed */
Reported-by: Geert Uytterhoeven <[email protected]>
Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
drivers/iommu/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 58b4a4dbfc78..3532b1ead19d 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -362,7 +362,7 @@ config IPMMU_VMSA
config SPAPR_TCE_IOMMU
bool "sPAPR TCE IOMMU Support"
- depends on PPC_POWERNV || PPC_PSERIES || (PPC && COMPILE_TEST)
+ depends on PPC_POWERNV || PPC_PSERIES
select IOMMU_API
help
Enables bits of IOMMU API required by VFIO. The iommu_ops
--
2.17.1
On Tue, Apr 14, 2020 at 04:26:30PM +0200, Krzysztof Kozlowski wrote:
> Reported-by: Geert Uytterhoeven <[email protected]>
> Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> drivers/iommu/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks.
On 04/14/2020 02:26 PM, Krzysztof Kozlowski wrote:
> Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC
> configurations, its presence makes arch/powerpc/kvm/Makefile to select
> modules which do not build in such configuration.
>
> The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists
> only with CONFIG_PPC_BOOK3S_64. However these modules are selected when
> COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures:
>
> In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0,
> from arch/powerpc/kvm/book3s_64_vio_hv.c:22:
> arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror]
> #define _PAGE_EXEC 0x00001 /* execute permission */
>
> In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0,
> from arch/powerpc/include/asm/book3s/pgtable.h:8,
> from arch/powerpc/include/asm/pgtable.h:18,
> from include/linux/mm.h:95,
> from arch/powerpc/include/asm/io.h:29,
> from include/linux/io.h:13,
> from include/linux/irq.h:20,
> from arch/powerpc/include/asm/hardirq.h:6,
> from include/linux/hardirq.h:9,
> from include/linux/kvm_host.h:7,
> from arch/powerpc/kvm/book3s_64_vio_hv.c:12:
> arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition
> #define _PAGE_EXEC 0x200 /* software: exec allowed */
>
> Reported-by: Geert Uytterhoeven <[email protected]>
> Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> drivers/iommu/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 58b4a4dbfc78..3532b1ead19d 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -362,7 +362,7 @@ config IPMMU_VMSA
>
> config SPAPR_TCE_IOMMU
> bool "sPAPR TCE IOMMU Support"
> - depends on PPC_POWERNV || PPC_PSERIES || (PPC && COMPILE_TEST)
> + depends on PPC_POWERNV || PPC_PSERIES
> select IOMMU_API
> help
> Enables bits of IOMMU API required by VFIO. The iommu_ops
>
Should it be fixed the other way round, something like:
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 2bfeaa13befb..906707d15810 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -135,4 +135,4 @@ obj-$(CONFIG_KVM_BOOK3S_32) += kvm.o
obj-$(CONFIG_KVM_BOOK3S_64_PR) += kvm-pr.o
obj-$(CONFIG_KVM_BOOK3S_64_HV) += kvm-hv.o
-obj-y += $(kvm-book3s_64-builtin-objs-y)
+obj-$(CONFIG_KVM_BOOK3S_64) += $(kvm-book3s_64-builtin-objs-y)
Christophe
Christophe Leroy <[email protected]> writes:
> On 04/14/2020 02:26 PM, Krzysztof Kozlowski wrote:
>> Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC
>> configurations, its presence makes arch/powerpc/kvm/Makefile to select
>> modules which do not build in such configuration.
>>
>> The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists
>> only with CONFIG_PPC_BOOK3S_64. However these modules are selected when
>> COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures:
>>
>> In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0,
>> from arch/powerpc/kvm/book3s_64_vio_hv.c:22:
>> arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror]
>> #define _PAGE_EXEC 0x00001 /* execute permission */
>>
>> In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0,
>> from arch/powerpc/include/asm/book3s/pgtable.h:8,
>> from arch/powerpc/include/asm/pgtable.h:18,
>> from include/linux/mm.h:95,
>> from arch/powerpc/include/asm/io.h:29,
>> from include/linux/io.h:13,
>> from include/linux/irq.h:20,
>> from arch/powerpc/include/asm/hardirq.h:6,
>> from include/linux/hardirq.h:9,
>> from include/linux/kvm_host.h:7,
>> from arch/powerpc/kvm/book3s_64_vio_hv.c:12:
>> arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition
>> #define _PAGE_EXEC 0x200 /* software: exec allowed */
>>
>> Reported-by: Geert Uytterhoeven <[email protected]>
>> Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
>> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>> ---
>> drivers/iommu/Kconfig | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
>> index 58b4a4dbfc78..3532b1ead19d 100644
>> --- a/drivers/iommu/Kconfig
>> +++ b/drivers/iommu/Kconfig
>> @@ -362,7 +362,7 @@ config IPMMU_VMSA
>>
>> config SPAPR_TCE_IOMMU
>> bool "sPAPR TCE IOMMU Support"
>> - depends on PPC_POWERNV || PPC_PSERIES || (PPC && COMPILE_TEST)
>> + depends on PPC_POWERNV || PPC_PSERIES
>> select IOMMU_API
>> help
>> Enables bits of IOMMU API required by VFIO. The iommu_ops
>>
>
> Should it be fixed the other way round, something like:
That doesn't actually fix this specific issue, the code will build but
then not link:
ld: arch/powerpc/../../virt/kvm/vfio.o: in function `.kvm_spapr_tce_release_vfio_group':
vfio.c:(.text.kvm_spapr_tce_release_vfio_group+0xb0): undefined reference to `.kvm_spapr_tce_release_iommu_group'
ld: arch/powerpc/../../virt/kvm/vfio.o: in function `.kvm_vfio_set_group':
vfio.c:(.text.kvm_vfio_set_group+0x7f4): undefined reference to `.kvm_spapr_tce_attach_iommu_group'
ld: arch/powerpc/kvm/powerpc.o: in function `.kvm_arch_vm_ioctl':
(.text.kvm_arch_vm_ioctl+0x1a4): undefined reference to `.kvm_vm_ioctl_create_spapr_tce'
ld: (.text.kvm_arch_vm_ioctl+0x230): undefined reference to `.kvm_vm_ioctl_create_spapr_tce'
make[1]: *** [/home/michael/linux/Makefile:1106: vmlinux] Error 1
> diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
> index 2bfeaa13befb..906707d15810 100644
> --- a/arch/powerpc/kvm/Makefile
> +++ b/arch/powerpc/kvm/Makefile
> @@ -135,4 +135,4 @@ obj-$(CONFIG_KVM_BOOK3S_32) += kvm.o
> obj-$(CONFIG_KVM_BOOK3S_64_PR) += kvm-pr.o
> obj-$(CONFIG_KVM_BOOK3S_64_HV) += kvm-hv.o
>
> -obj-y += $(kvm-book3s_64-builtin-objs-y)
> +obj-$(CONFIG_KVM_BOOK3S_64) += $(kvm-book3s_64-builtin-objs-y)
But this is probably still a good thing to do, as it would have made the
error messages clearer in this case I think.
cheers