2022-10-30 07:34:47

by Marijn Suijten

Subject: [PATCH 08/10] arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMA

Enable QUP and GPI DMA hardware to be able to add functioning I2C nodes
later.

Signed-off-by: Marijn Suijten <[email protected]>
---
.../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 5cb76026ef67..6eb1d4e5e60f 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -272,6 +272,14 @@ pm6150l_bob: bob {
};
};

+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
&pm6350_gpios {
gpio_keys_state: gpio-keys-state {
key-volume-down-pins {
@@ -289,6 +297,14 @@ &pm6350_resin {
status = "okay";
};

+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
&sdc2_off_state {
sd-cd-pins {
pins = "gpio94";
--
2.38.1

2022-10-31 21:39:07

by Konrad Dybcio

Subject: Re: [PATCH 08/10] arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMA

On 30.10.2022 08:32, Marijn Suijten wrote:
> Enable QUP and GPI DMA hardware to be able to add functioning I2C nodes
> later.
>
> Signed-off-by: Marijn Suijten <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>

Konrad
> .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> index 5cb76026ef67..6eb1d4e5e60f 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> @@ -272,6 +272,14 @@ pm6150l_bob: bob {
> };
> };
>
> +&gpi_dma0 {
> + status = "okay";
> +};
> +
> +&gpi_dma1 {
> + status = "okay";
> +};
> +
> &pm6350_gpios {
> gpio_keys_state: gpio-keys-state {
> key-volume-down-pins {
> @@ -289,6 +297,14 @@ &pm6350_resin {
> status = "okay";
> };
>
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> &sdc2_off_state {
> sd-cd-pins {
> pins = "gpio94";