This series exposes an interface to userspace for reading and writing
secure variables contained within the PowerVM LPAR Platform KeyStore
(PLPKS) for the purpose of configuring dynamic secure boot, and adds
the glue required to load keys from the PLPKS into the platform keyring.
This series builds on past work by Nayna Jain[0] in exposing PLPKS
variables to userspace. Rather than being a generic interface for
interacting with the keystore, however, we use the existing powerpc
secvar infrastructure to only expose objects in the keystore used
for dynamic secure boot. This has the benefit of leveraging an
existing interface and making the implementation relatively minimal.
This series integrates a previous series to fix some bugs in PLPKS
and implement support for signed updates[1], and a cleanup patch from
Michael Ellerman[2].
There are a few relevant details to note about the implementation:
* New additions to the secvar API: format(), max_size(), config_attrs,
var_names
* New optional sysfs directory "config/" for arbitrary ASCII variables
* Some OPAL-specific code has been relocated from secvar-sysfs.c to
powernv platform code. Would appreciate any powernv testing!
* Variable names are fixed and only those used for secure boot are
exposed. This is not a generic PLPKS interface, but also doesn't
preclude one being added in future.
With this series, both powernv and pseries platforms support dynamic
secure boot through the same interface.
Many thanks to Nayna Jain, Ben Gray, Sudhakar Kuppusamy, Shubham Pandey,
Mimi Zohar, George Wilson and the others at IBM who have helped us with
developing this series, and to everyone who has provided review comments
and feedback.
[0]: https://lore.kernel.org/linuxppc-dev/[email protected]/
[1]: https://lore.kernel.org/linuxppc-dev/[email protected]/
[2]: https://lore.kernel.org/linuxppc-dev/[email protected]/
v1: https://lore.kernel.org/linuxppc-dev/[email protected]/
v2: https://lore.kernel.org/linuxppc-dev/[email protected]/
v3: https://lore.kernel.org/linuxppc-dev/[email protected]/
v4: https://lore.kernel.org/linuxppc-dev/[email protected]/
=================
Changes in v5:
New patch to fix incorrect return value in secvar_sysfs_load() (ruscur)
Better explanation of power of 2 kmalloc rounding (mpe)
Add null component check on signed updates (npiggin)
Don't export plpks_signed_update_var() (npiggin)
Fix all the feedback we got on kexec handling, including removing the
password from the FDT (npiggin, mpe)
Enable plpks-secvar.c using CONFIG_PPC_SECURE_BOOT rather than
CONFIG_PPC_SECVAR_SYSFS (ajd)
Clarify handling of ibm,secvar-backend vs ibm,edk2-compat-v1
compatible string (zohar)
Lots of miscellaneous improvements (npiggin)
Changes in v4:
Fix the build when CONFIG_PSERIES_PLPKS=n (snowpatch)
Shuffled fixes to the front the series (npiggin)
Pass buffer size in secvar_operations->format() (stefanb, npiggin)
Return an error when set_secvar_ops() fails (npiggin)
Add some extra null checks (stefanb, gjoyce)
Add commit message comment elaborating on PAGE_SIZE issues (joel)
Fix error handling in the kexec code (ruscur)
Fix hvcall.h MAX_HCALL_OPCODE rebasing issue (npiggin)
Changes in v3:
Integrate Andrew's PLPKS bugfixes and enhancements series and Michael
Ellerman's u64 cleanup patch into this series (and update the other
patches to use u64)
New patches to load keys from the PLPKS into the kernel's platform
keyring (ruscur)
New patches to pass PLPKS password to new kernels when kexecing
(ruscur)
Improve handling of format strings (ruscur)
Clean up secvar error messages (ajd)
Merge config attributes into secvar_operations (mpe)
Add a new static variable names API rather than (ab)using get_next()
(ajd/mpe)
Warning message when PAGE_SIZE is smaller than the max object size
(ajd)
Move plpks.h to the include directory, and move a bunch of constants
in there with a consistent naming scheme
Refresh PLPKS config values whenever plpks_get_usedspace() is called
(ajd)
Extra validation on PLPKS config values (ruscur)
Return maxobjlabelsize to userspace as is without subtracting overhead (ruscur)
Fix error code handling in plpks_confirm_object_flushed() (ruscur)
Pass plpks_var struct to plpks_signed_update_var() by reference (mpe)
Make the data buffer in plpks_read_var() caller-allocated to reduce
number of allocations/copies (mpe)
Rework the Kconfig options so that PSERIES_PLPKS is a hidden option,
turned on by enabling PPC_SECURE_BOOT, and the PLPKS secvar code is
activated by PPC_SECVAR_SYSFS to match powernv (ajd)
Use machine_arch_initcall() rather than device_initcall() so we don't
break powernv (mpe)
Improve ABI documentation (mpe)
Return -EIO on most read errors (mpe)
Add "grubdbx" variable (Sudhakar)
Use utf8s_to_utf16s() rather than our own "UCS-2" conversion code (mpe)
Fix SB_VERSION data length (ruscur)
Stop prepending policy data on read (ruscur)
Don't print errors to the kernel log when reading non-existent
variables (Sudhakar)
Miscellaneous code style, checkpatch cleanups
Changes in v2:
Remove unnecessary config vars from sysfs and document the others,
thanks to review from Greg. If we end up needing to expose more, we
can add them later and update the docs.
Use sysfs_emit() instead of sprintf() for all sysfs strings
Change the size of the sysfs binary attributes to include the 8-byte
flags header, preventing truncation of large writes.
Andrew Donnellan (8):
powerpc/pseries: Fix handling of PLPKS object flushing timeout
powerpc/pseries: Fix alignment of PLPKS structures and buffers
powerpc/secvar: Clean up init error messages
powerpc/secvar: Allow backend to populate static list of variable
names
powerpc/secvar: Warn when PAGE_SIZE is smaller than max object size
powerpc/secvar: Don't print error on ENOENT when reading variables
powerpc/pseries: Make caller pass buffer to plpks_read_var()
powerpc/pseries: Turn PSERIES_PLPKS into a hidden option
Michael Ellerman (1):
powerpc/secvar: Use u64 in secvar_operations
Nayna Jain (2):
powerpc/pseries: Expose PLPKS config values, support additional fields
powerpc/pseries: Implement signed update for PLPKS objects
Russell Currey (14):
powerpc/secvar: Fix incorrect return in secvar_sysfs_load()
powerpc/secvar: Warn and error if multiple secvar ops are set
powerpc/secvar: Use sysfs_emit() instead of sprintf()
powerpc/secvar: Handle format string in the consumer
powerpc/secvar: Handle max object size in the consumer
powerpc/secvar: Extend sysfs to include config vars
powerpc/pseries: Move plpks.h to include directory
powerpc/pseries: Move PLPKS constants to header file
powerpc/pseries: Log hcall return codes for PLPKS debug
powerpc/pseries: Add helper to get PLPKS password length
powerpc/pseries: Pass PLPKS password on kexec
powerpc/pseries: Implement secvars for dynamic secure boot
integrity/powerpc: Improve error handling & reporting when loading
certs
integrity/powerpc: Support loading keys from PLPKS
Documentation/ABI/testing/sysfs-secvar | 75 +++-
arch/powerpc/Kconfig | 1 +
arch/powerpc/include/asm/hvcall.h | 1 +
arch/powerpc/include/asm/plpks.h | 195 +++++++++
arch/powerpc/include/asm/secvar.h | 21 +-
arch/powerpc/kernel/prom.c | 4 +
arch/powerpc/kernel/secvar-ops.c | 8 +-
arch/powerpc/kernel/secvar-sysfs.c | 176 ++++----
arch/powerpc/kexec/file_load_64.c | 15 +-
arch/powerpc/platforms/powernv/opal-secvar.c | 60 ++-
arch/powerpc/platforms/pseries/Kconfig | 19 +-
arch/powerpc/platforms/pseries/Makefile | 4 +-
arch/powerpc/platforms/pseries/plpks-secvar.c | 219 ++++++++++
arch/powerpc/platforms/pseries/plpks.c | 378 +++++++++++++++---
arch/powerpc/platforms/pseries/plpks.h | 71 ----
.../integrity/platform_certs/load_powerpc.c | 47 ++-
16 files changed, 1040 insertions(+), 254 deletions(-)
create mode 100644 arch/powerpc/include/asm/plpks.h
create mode 100644 arch/powerpc/platforms/pseries/plpks-secvar.c
delete mode 100644 arch/powerpc/platforms/pseries/plpks.h
--
2.39.1
Remove unnecessary prefixes from error messages in secvar_sysfs_init()
(the file defines pr_fmt, so putting "secvar:" in every message is
unnecessary). Make capitalisation and punctuation more consistent.
Signed-off-by: Andrew Donnellan <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v3: New patch (ajd)
---
arch/powerpc/kernel/secvar-sysfs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
index 0966806f28c7..8f3deff94009 100644
--- a/arch/powerpc/kernel/secvar-sysfs.c
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -196,13 +196,13 @@ static int secvar_sysfs_init(void)
int rc;
if (!secvar_ops) {
- pr_warn("secvar: failed to retrieve secvar operations.\n");
+ pr_warn("Failed to retrieve secvar operations\n");
return -ENODEV;
}
secvar_kobj = kobject_create_and_add("secvar", firmware_kobj);
if (!secvar_kobj) {
- pr_err("secvar: Failed to create firmware kobj\n");
+ pr_err("Failed to create firmware kobj\n");
return -ENOMEM;
}
@@ -214,7 +214,7 @@ static int secvar_sysfs_init(void)
secvar_kset = kset_create_and_add("vars", NULL, secvar_kobj);
if (!secvar_kset) {
- pr_err("secvar: sysfs kobject registration failed.\n");
+ pr_err("sysfs kobject registration failed\n");
kobject_put(secvar_kobj);
return -ENOMEM;
}
--
2.39.1
plpks_confirm_object_flushed() uses the H_PKS_CONFIRM_OBJECT_FLUSHED hcall
to check whether changes to an object in the Platform KeyStore have been
flushed to non-volatile storage.
The hcall returns two output values, the return code and the flush status.
plpks_confirm_object_flushed() polls the hcall until either the flush
status has updated, the return code is an error, or a timeout has been
exceeded.
While we're still polling, the hcall is returning H_SUCCESS (0) as the
return code. In the timeout case, this means that upon exiting the polling
loop, rc is 0, and therefore 0 is returned to the user.
Handle the timeout case separately and return ETIMEDOUT if triggered.
Fixes: 2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Reported-by: Benjamin Gray <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
Tested-by: Russell Currey <[email protected]>
Reviewed-by: Russell Currey <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v3: Merge plpks fixes and signed update series with secvar series
Neaten how we return at the end of the function (ruscur)
v4: Move up in series (npiggin)
---
arch/powerpc/platforms/pseries/plpks.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index 4edd1585e245..9e85b6d85b0b 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -248,6 +248,7 @@ static int plpks_confirm_object_flushed(struct label *label,
struct plpks_auth *auth)
{
unsigned long retbuf[PLPAR_HCALL_BUFSIZE] = { 0 };
+ bool timed_out = true;
u64 timeout = 0;
u8 status;
int rc;
@@ -259,22 +260,26 @@ static int plpks_confirm_object_flushed(struct label *label,
status = retbuf[0];
if (rc) {
+ timed_out = false;
if (rc == H_NOT_FOUND && status == 1)
rc = 0;
break;
}
- if (!rc && status == 1)
+ if (!rc && status == 1) {
+ timed_out = false;
break;
+ }
usleep_range(PKS_FLUSH_SLEEP,
PKS_FLUSH_SLEEP + PKS_FLUSH_SLEEP_RANGE);
timeout = timeout + PKS_FLUSH_SLEEP;
} while (timeout < PKS_FLUSH_MAX_TIMEOUT);
- rc = pseries_status_to_err(rc);
+ if (timed_out)
+ return -ETIMEDOUT;
- return rc;
+ return pseries_status_to_err(rc);
}
int plpks_write_var(struct plpks_var var)
--
2.39.1
From: Russell Currey <[email protected]>
The forthcoming pseries consumer of the secvar API wants to expose a
number of config variables. Allowing secvar implementations to provide
their own sysfs attributes makes it easy for consumers to expose what
they need to.
This is not being used by the OPAL secvar implementation at present, and
the config directory will not be created if no attributes are set.
Signed-off-by: Russell Currey <[email protected]>
Co-developed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: Remove unnecessary "secvar:" prefix from error messages (ajd)
Merge config attributes into secvar_operations (mpe)
---
arch/powerpc/include/asm/secvar.h | 2 ++
arch/powerpc/kernel/secvar-sysfs.c | 33 +++++++++++++++++++++++++-----
2 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h
index bf396215903d..011a53a8076c 100644
--- a/arch/powerpc/include/asm/secvar.h
+++ b/arch/powerpc/include/asm/secvar.h
@@ -10,6 +10,7 @@
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/sysfs.h>
extern const struct secvar_operations *secvar_ops;
@@ -19,6 +20,7 @@ struct secvar_operations {
int (*set)(const char *key, u64 key_len, u8 *data, u64 data_size);
ssize_t (*format)(char *buf, size_t bufsize);
int (*max_size)(u64 *max_size);
+ const struct attribute **config_attrs;
};
#ifdef CONFIG_PPC_SECURE_BOOT
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
index 8f3deff94009..7df32be86507 100644
--- a/arch/powerpc/kernel/secvar-sysfs.c
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -144,6 +144,19 @@ static int update_kobj_size(void)
return 0;
}
+static int secvar_sysfs_config(struct kobject *kobj)
+{
+ struct attribute_group config_group = {
+ .name = "config",
+ .attrs = (struct attribute **)secvar_ops->config_attrs,
+ };
+
+ if (secvar_ops->config_attrs)
+ return sysfs_create_group(kobj, &config_group);
+
+ return 0;
+}
+
static int secvar_sysfs_load(void)
{
struct kobject *kobj;
@@ -208,26 +221,36 @@ static int secvar_sysfs_init(void)
rc = sysfs_create_file(secvar_kobj, &format_attr.attr);
if (rc) {
- kobject_put(secvar_kobj);
- return -ENOMEM;
+ pr_err("Failed to create format object\n");
+ rc = -ENOMEM;
+ goto err;
}
secvar_kset = kset_create_and_add("vars", NULL, secvar_kobj);
if (!secvar_kset) {
pr_err("sysfs kobject registration failed\n");
- kobject_put(secvar_kobj);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto err;
}
rc = update_kobj_size();
if (rc) {
pr_err("Cannot read the size of the attribute\n");
- return rc;
+ goto err;
+ }
+
+ rc = secvar_sysfs_config(secvar_kobj);
+ if (rc) {
+ pr_err("Failed to create config directory\n");
+ goto err;
}
secvar_sysfs_load();
return 0;
+err:
+ kobject_put(secvar_kobj);
+ return rc;
}
late_initcall(secvar_sysfs_init);
--
2.39.1
A number of structures and buffers passed to PKS hcalls have alignment
requirements, which could on occasion cause problems:
- Authorisation structures must be 16-byte aligned and must not cross a
page boundary
- Label structures must not cross page boundaries
- Password output buffers must not cross page boundaries
To ensure correct alignment, we adjust the allocation size of each of
these structures/buffers to be the closest power of 2 that is at least the
size of the structure/buffer (since kmalloc() guarantees that an
allocation of a power of 2 size will be aligned to at least that size).
Reported-by: Benjamin Gray <[email protected]>
Fixes: 2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Russell Currey <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v3: Merge plpks fixes and signed update series with secvar series
v4: Fix typo in commit message
Move up in series (npiggin)
v5: Reword commit message to better explain alignment guarantee (mpe)
---
arch/powerpc/platforms/pseries/plpks.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index 9e85b6d85b0b..a01cf2ff140a 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -126,7 +126,8 @@ static int plpks_gen_password(void)
u8 *password, consumer = PKS_OS_OWNER;
int rc;
- password = kzalloc(maxpwsize, GFP_KERNEL);
+ // The password must not cross a page boundary, so we align to the next power of 2
+ password = kzalloc(roundup_pow_of_two(maxpwsize), GFP_KERNEL);
if (!password)
return -ENOMEM;
@@ -162,7 +163,9 @@ static struct plpks_auth *construct_auth(u8 consumer)
if (consumer > PKS_OS_OWNER)
return ERR_PTR(-EINVAL);
- auth = kzalloc(struct_size(auth, password, maxpwsize), GFP_KERNEL);
+ // The auth structure must not cross a page boundary and must be
+ // 16 byte aligned. We align to the next largest power of 2
+ auth = kzalloc(roundup_pow_of_two(struct_size(auth, password, maxpwsize)), GFP_KERNEL);
if (!auth)
return ERR_PTR(-ENOMEM);
@@ -196,7 +199,8 @@ static struct label *construct_label(char *component, u8 varos, u8 *name,
if (component && slen > sizeof(label->attr.prefix))
return ERR_PTR(-EINVAL);
- label = kzalloc(sizeof(*label), GFP_KERNEL);
+ // The label structure must not cross a page boundary, so we align to the next power of 2
+ label = kzalloc(roundup_pow_of_two(sizeof(*label)), GFP_KERNEL);
if (!label)
return ERR_PTR(-ENOMEM);
--
2.39.1
If attempting to read the size or data attributes of a non-existent
variable (which will be possible after a later patch to expose the PLPKS
via the secvar interface), don't spam the kernel log with error messages.
Only print errors for return codes that aren't ENOENT.
Reported-by: Sudhakar Kuppusamy <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: New patch
---
arch/powerpc/kernel/secvar-sysfs.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
index 9b6be63b7b36..ca3df3f7156c 100644
--- a/arch/powerpc/kernel/secvar-sysfs.c
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -43,8 +43,8 @@ static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
if (rc) {
- pr_err("Error retrieving %s variable size %d\n", kobj->name,
- rc);
+ if (rc != -ENOENT)
+ pr_err("Error retrieving %s variable size %d\n", kobj->name, rc);
return rc;
}
@@ -61,7 +61,8 @@ static ssize_t data_read(struct file *filep, struct kobject *kobj,
rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
if (rc) {
- pr_err("Error getting %s variable size %d\n", kobj->name, rc);
+ if (rc != -ENOENT)
+ pr_err("Error getting %s variable size %d\n", kobj->name, rc);
return rc;
}
pr_debug("dsize is %llu\n", dsize);
--
2.39.1
From: Russell Currey <[email protected]>
The secvar format string and object size sysfs files are both ASCII
text, and should use sysfs_emit(). No functional change.
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v2: New patch (gregkh)
---
arch/powerpc/kernel/secvar-sysfs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
index 702044edf14d..b786d1005027 100644
--- a/arch/powerpc/kernel/secvar-sysfs.c
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -35,7 +35,7 @@ static ssize_t format_show(struct kobject *kobj, struct kobj_attribute *attr,
if (rc)
goto out;
- rc = sprintf(buf, "%s\n", format);
+ rc = sysfs_emit(buf, "%s\n", format);
out:
of_node_put(node);
@@ -57,7 +57,7 @@ static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
return rc;
}
- return sprintf(buf, "%llu\n", dsize);
+ return sysfs_emit(buf, "%llu\n", dsize);
}
static ssize_t data_read(struct file *filep, struct kobject *kobj,
--
2.39.1
From: Russell Currey <[email protected]>
A few improvements to load_powerpc.c:
- include integrity.h for the pr_fmt()
- move all error reporting out of get_cert_list()
- use ERR_PTR() to better preserve error detail
- don't use pr_err() for missing keys
Reviewed-by: Mimi Zohar <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: New patch
---
.../integrity/platform_certs/load_powerpc.c | 26 ++++++++++++++-----
1 file changed, 20 insertions(+), 6 deletions(-)
diff --git a/security/integrity/platform_certs/load_powerpc.c b/security/integrity/platform_certs/load_powerpc.c
index 1e4f80a4e71c..dee51606d5f4 100644
--- a/security/integrity/platform_certs/load_powerpc.c
+++ b/security/integrity/platform_certs/load_powerpc.c
@@ -14,9 +14,15 @@
#include <asm/secure_boot.h>
#include <asm/secvar.h>
#include "keyring_handler.h"
+#include "../integrity.h"
/*
* Get a certificate list blob from the named secure variable.
+ *
+ * Returns:
+ * - a pointer to a kmalloc'd buffer containing the cert list on success
+ * - NULL if the key does not exist
+ * - an ERR_PTR on error
*/
static __init void *get_cert_list(u8 *key, unsigned long keylen, u64 *size)
{
@@ -25,19 +31,19 @@ static __init void *get_cert_list(u8 *key, unsigned long keylen, u64 *size)
rc = secvar_ops->get(key, keylen, NULL, size);
if (rc) {
- pr_err("Couldn't get size: %d\n", rc);
- return NULL;
+ if (rc == -ENOENT)
+ return NULL;
+ return ERR_PTR(rc);
}
db = kmalloc(*size, GFP_KERNEL);
if (!db)
- return NULL;
+ return ERR_PTR(-ENOMEM);
rc = secvar_ops->get(key, keylen, db, size);
if (rc) {
kfree(db);
- pr_err("Error reading %s var: %d\n", key, rc);
- return NULL;
+ return ERR_PTR(rc);
}
return db;
@@ -69,7 +75,11 @@ static int __init load_powerpc_certs(void)
*/
db = get_cert_list("db", 3, &dbsize);
if (!db) {
- pr_err("Couldn't get db list from firmware\n");
+ pr_info("Couldn't get db list from firmware\n");
+ } else if (IS_ERR(db)) {
+ rc = PTR_ERR(db);
+ pr_err("Error reading db from firmware: %d\n", rc);
+ return rc;
} else {
rc = parse_efi_signature_list("powerpc:db", db, dbsize,
get_handler_for_db);
@@ -81,6 +91,10 @@ static int __init load_powerpc_certs(void)
dbx = get_cert_list("dbx", 4, &dbxsize);
if (!dbx) {
pr_info("Couldn't get dbx list from firmware\n");
+ } else if (IS_ERR(dbx)) {
+ rc = PTR_ERR(dbx);
+ pr_err("Error reading dbx from firmware: %d\n", rc);
+ return rc;
} else {
rc = parse_efi_signature_list("powerpc:dbx", dbx, dbxsize,
get_handler_for_dbx);
--
2.39.1
It seems a bit unnecessary for the PLPKS code to have a user-visible
config option when it doesn't do anything on its own, and there's existing
options for enabling Secure Boot-related features.
It should be enabled by PPC_SECURE_BOOT, which will eventually be what
uses PLPKS to populate keyrings.
However, we can't get of the separate option completely, because it will
also be used for SED Opal purposes.
Change PSERIES_PLPKS into a hidden option, which is selected by
PPC_SECURE_BOOT.
Signed-off-by: Andrew Donnellan <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v3: New patch
v5: Change the previous description into a comment (npiggin)
---
arch/powerpc/Kconfig | 1 +
arch/powerpc/platforms/pseries/Kconfig | 19 +++++++++----------
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b8c4ac56bddc..d4ed46101bec 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -1029,6 +1029,7 @@ config PPC_SECURE_BOOT
depends on PPC_POWERNV || PPC_PSERIES
depends on IMA_ARCH_POLICY
imply IMA_SECURE_AND_OR_TRUSTED_BOOT
+ select PSERIES_PLPKS if PPC_PSERIES
help
Systems with firmware secure boot enabled need to define security
policies to extend secure boot to the OS. This config allows a user
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index a3b4d99567cb..e51d65969318 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -151,16 +151,15 @@ config IBMEBUS
config PSERIES_PLPKS
depends on PPC_PSERIES
- bool "Support for the Platform Key Storage"
- help
- PowerVM provides an isolated Platform Keystore(PKS) storage
- allocation for each LPAR with individually managed access
- controls to store sensitive information securely. It can be
- used to store asymmetric public keys or secrets as required
- by different usecases. Select this config to enable
- operating system interface to hypervisor to access this space.
-
- If unsure, select N.
+ bool
+ # PowerVM provides an isolated Platform Keystore (PKS) storage
+ # allocation for each LPAR with individually managed access
+ # controls to store sensitive information securely. It can be
+ # used to store asymmetric public keys or secrets as required
+ # by different usecases.
+ #
+ # This option is selected by in-kernel consumers that require
+ # access to the PKS.
config PAPR_SCM
depends on PPC_PSERIES && MEMORY_HOTPLUG && LIBNVDIMM
--
2.39.1
From: Russell Currey <[email protected]>
Move plpks.h from platforms/pseries/ to include/asm/. This is necessary
for later patches to make use of the PLPKS from code in other subsystems.
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: New patch
---
.../powerpc/{platforms/pseries => include/asm}/plpks.h | 10 +++++++---
arch/powerpc/platforms/pseries/plpks.c | 3 +--
2 files changed, 8 insertions(+), 5 deletions(-)
rename arch/powerpc/{platforms/pseries => include/asm}/plpks.h (89%)
diff --git a/arch/powerpc/platforms/pseries/plpks.h b/arch/powerpc/include/asm/plpks.h
similarity index 89%
rename from arch/powerpc/platforms/pseries/plpks.h
rename to arch/powerpc/include/asm/plpks.h
index 275ccd86bfb5..8295502ee93b 100644
--- a/arch/powerpc/platforms/pseries/plpks.h
+++ b/arch/powerpc/include/asm/plpks.h
@@ -6,8 +6,10 @@
* Platform keystore for pseries LPAR(PLPKS).
*/
-#ifndef _PSERIES_PLPKS_H
-#define _PSERIES_PLPKS_H
+#ifndef _ASM_POWERPC_PLPKS_H
+#define _ASM_POWERPC_PLPKS_H
+
+#ifdef CONFIG_PSERIES_PLPKS
#include <linux/types.h>
#include <linux/list.h>
@@ -68,4 +70,6 @@ int plpks_read_fw_var(struct plpks_var *var);
*/
int plpks_read_bootloader_var(struct plpks_var *var);
-#endif
+#endif // CONFIG_PSERIES_PLPKS
+
+#endif // _ASM_POWERPC_PLPKS_H
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index a01cf2ff140a..13e6daadb179 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -18,8 +18,7 @@
#include <linux/types.h>
#include <asm/hvcall.h>
#include <asm/machdep.h>
-
-#include "plpks.h"
+#include <asm/plpks.h>
#define PKS_FW_OWNER 0x1
#define PKS_BOOTLOADER_OWNER 0x2
--
2.39.1
From: Russell Currey <[email protected]>
The plpks code converts hypervisor return codes into their Linux
equivalents so that users can understand them. Having access to the
original return codes is really useful for debugging, so add a
pr_debug() so we don't lose information from the conversion.
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
arch/powerpc/platforms/pseries/plpks.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index cee06fb9a370..e5755443d4a4 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -117,6 +117,8 @@ static int pseries_status_to_err(int rc)
err = -EINVAL;
}
+ pr_debug("Converted hypervisor code %d to Linux %d\n", rc, err);
+
return err;
}
--
2.39.1
From: Nayna Jain <[email protected]>
The plpks driver uses the H_PKS_GET_CONFIG hcall to retrieve configuration
and status information about the PKS from the hypervisor.
Update _plpks_get_config() to handle some additional fields. Add getter
functions to allow the PKS configuration information to be accessed from
other files. Validate that the values we're getting comply with the spec.
While we're here, move the config struct in _plpks_get_config() off the
stack - it's getting large and we also need to make sure it doesn't cross
a page boundary.
Signed-off-by: Nayna Jain <[email protected]>
[ajd: split patch, extend to support additional v3 API fields, minor fixes]
Co-developed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v3: Merge plpks fixes and signed update series with secvar series
Refresh config values in plpks_get_usedspace() (ajd)
Validate the config values being returned comply with spec (ruscur)
Return maxobjlabelsize as is (ruscur)
Move plpks.h to include/asm (ruscur)
Fix checkpatch checks (ruscur)
---
arch/powerpc/include/asm/plpks.h | 58 ++++++++++
arch/powerpc/platforms/pseries/plpks.c | 149 +++++++++++++++++++++++--
2 files changed, 195 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h
index 6466aadd7145..7c5f51a9af7c 100644
--- a/arch/powerpc/include/asm/plpks.h
+++ b/arch/powerpc/include/asm/plpks.h
@@ -96,6 +96,64 @@ int plpks_read_fw_var(struct plpks_var *var);
*/
int plpks_read_bootloader_var(struct plpks_var *var);
+/**
+ * Returns if PKS is available on this LPAR.
+ */
+bool plpks_is_available(void);
+
+/**
+ * Returns version of the Platform KeyStore.
+ */
+u8 plpks_get_version(void);
+
+/**
+ * Returns hypervisor storage overhead per object, not including the size of
+ * the object or label. Only valid for config version >= 2
+ */
+u16 plpks_get_objoverhead(void);
+
+/**
+ * Returns maximum password size. Must be >= 32 bytes
+ */
+u16 plpks_get_maxpwsize(void);
+
+/**
+ * Returns maximum object size supported by Platform KeyStore.
+ */
+u16 plpks_get_maxobjectsize(void);
+
+/**
+ * Returns maximum object label size supported by Platform KeyStore.
+ */
+u16 plpks_get_maxobjectlabelsize(void);
+
+/**
+ * Returns total size of the configured Platform KeyStore.
+ */
+u32 plpks_get_totalsize(void);
+
+/**
+ * Returns used space from the total size of the Platform KeyStore.
+ */
+u32 plpks_get_usedspace(void);
+
+/**
+ * Returns bitmask of policies supported by the hypervisor.
+ */
+u32 plpks_get_supportedpolicies(void);
+
+/**
+ * Returns maximum byte size of a single object supported by the hypervisor.
+ * Only valid for config version >= 3
+ */
+u32 plpks_get_maxlargeobjectsize(void);
+
+/**
+ * Returns bitmask of signature algorithms supported for signed updates.
+ * Only valid for config version >= 3
+ */
+u64 plpks_get_signedupdatealgorithms(void);
+
#endif // CONFIG_PSERIES_PLPKS
#endif // _ASM_POWERPC_PLPKS_H
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index 91f3f623a2c7..1189246b03dc 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -24,8 +24,16 @@ static u8 *ospassword;
static u16 ospasswordlength;
// Retrieved with H_PKS_GET_CONFIG
+static u8 version;
+static u16 objoverhead;
static u16 maxpwsize;
static u16 maxobjsize;
+static s16 maxobjlabelsize;
+static u32 totalsize;
+static u32 usedspace;
+static u32 supportedpolicies;
+static u32 maxlargeobjectsize;
+static u64 signedupdatealgorithms;
struct plpks_auth {
u8 version;
@@ -206,32 +214,149 @@ static struct label *construct_label(char *component, u8 varos, u8 *name,
static int _plpks_get_config(void)
{
unsigned long retbuf[PLPAR_HCALL_BUFSIZE] = { 0 };
- struct {
+ struct config {
u8 version;
u8 flags;
- __be32 rsvd0;
+ __be16 rsvd0;
+ __be16 objoverhead;
__be16 maxpwsize;
__be16 maxobjlabelsize;
__be16 maxobjsize;
__be32 totalsize;
__be32 usedspace;
__be32 supportedpolicies;
- __be64 rsvd1;
- } __packed config;
+ __be32 maxlargeobjectsize;
+ __be64 signedupdatealgorithms;
+ u8 rsvd1[476];
+ } __packed * config;
size_t size;
- int rc;
+ int rc = 0;
+
+ size = sizeof(*config);
+
+ // Config struct must not cross a page boundary. So long as the struct
+ // size is a power of 2, this should be fine as alignment is guaranteed
+ config = kzalloc(size, GFP_KERNEL);
+ if (!config) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ rc = plpar_hcall(H_PKS_GET_CONFIG, retbuf, virt_to_phys(config), size);
+
+ if (rc != H_SUCCESS) {
+ rc = pseries_status_to_err(rc);
+ goto err;
+ }
+
+ version = config->version;
+ objoverhead = be16_to_cpu(config->objoverhead);
+ maxpwsize = be16_to_cpu(config->maxpwsize);
+ maxobjsize = be16_to_cpu(config->maxobjsize);
+ maxobjlabelsize = be16_to_cpu(config->maxobjlabelsize);
+ totalsize = be32_to_cpu(config->totalsize);
+ usedspace = be32_to_cpu(config->usedspace);
+ supportedpolicies = be32_to_cpu(config->supportedpolicies);
+ maxlargeobjectsize = be32_to_cpu(config->maxlargeobjectsize);
+ signedupdatealgorithms = be64_to_cpu(config->signedupdatealgorithms);
+
+ // Validate that the numbers we get back match the requirements of the spec
+ if (maxpwsize < 32) {
+ pr_err("Invalid Max Password Size received from hypervisor (%d < 32)\n", maxpwsize);
+ rc = -EIO;
+ goto err;
+ }
+
+ if (maxobjlabelsize < 255) {
+ pr_err("Invalid Max Object Label Size received from hypervisor (%d < 255)\n",
+ maxobjlabelsize);
+ rc = -EIO;
+ goto err;
+ }
- size = sizeof(config);
+ if (totalsize < 4096) {
+ pr_err("Invalid Total Size received from hypervisor (%d < 4096)\n", totalsize);
+ rc = -EIO;
+ goto err;
+ }
+
+ if (version >= 3 && maxlargeobjectsize >= 65536 && maxobjsize != 0xFFFF) {
+ pr_err("Invalid Max Object Size (0x%x != 0xFFFF)\n", maxobjsize);
+ rc = -EIO;
+ goto err;
+ }
+
+err:
+ kfree(config);
+ return rc;
+}
+
+u8 plpks_get_version(void)
+{
+ return version;
+}
- rc = plpar_hcall(H_PKS_GET_CONFIG, retbuf, virt_to_phys(&config), size);
+u16 plpks_get_objoverhead(void)
+{
+ return objoverhead;
+}
- if (rc != H_SUCCESS)
- return pseries_status_to_err(rc);
+u16 plpks_get_maxpwsize(void)
+{
+ return maxpwsize;
+}
- maxpwsize = be16_to_cpu(config.maxpwsize);
- maxobjsize = be16_to_cpu(config.maxobjsize);
+u16 plpks_get_maxobjectsize(void)
+{
+ return maxobjsize;
+}
+
+u16 plpks_get_maxobjectlabelsize(void)
+{
+ return maxobjlabelsize;
+}
+
+u32 plpks_get_totalsize(void)
+{
+ return totalsize;
+}
+
+u32 plpks_get_usedspace(void)
+{
+ // Unlike other config values, usedspace regularly changes as objects
+ // are updated, so we need to refresh.
+ int rc = _plpks_get_config();
+ if (rc) {
+ pr_err("Couldn't get config, rc: %d\n", rc);
+ return 0;
+ }
+ return usedspace;
+}
+
+u32 plpks_get_supportedpolicies(void)
+{
+ return supportedpolicies;
+}
+
+u32 plpks_get_maxlargeobjectsize(void)
+{
+ return maxlargeobjectsize;
+}
+
+u64 plpks_get_signedupdatealgorithms(void)
+{
+ return signedupdatealgorithms;
+}
+
+bool plpks_is_available(void)
+{
+ int rc;
+
+ rc = _plpks_get_config();
+ if (rc)
+ return false;
- return 0;
+ return true;
}
static int plpks_confirm_object_flushed(struct label *label,
--
2.39.1
From: Russell Currey <[email protected]>
Add helper function to get the PLPKS password length. This will be used
in a later patch to support passing the password between kernels over
kexec.
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: New patch
v5: Drop plpks_get_password() since we no longer need to expose it.
---
arch/powerpc/include/asm/plpks.h | 5 +++++
arch/powerpc/platforms/pseries/plpks.c | 5 +++++
2 files changed, 10 insertions(+)
diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h
index 0c49969b0864..757313e00521 100644
--- a/arch/powerpc/include/asm/plpks.h
+++ b/arch/powerpc/include/asm/plpks.h
@@ -171,6 +171,11 @@ u32 plpks_get_maxlargeobjectsize(void);
*/
u64 plpks_get_signedupdatealgorithms(void);
+/**
+ * Returns the length of the PLPKS password in bytes.
+ */
+u16 plpks_get_passwordlen(void);
+
#endif // CONFIG_PSERIES_PLPKS
#endif // _ASM_POWERPC_PLPKS_H
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index 926b6a927326..6940280ae94a 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -359,6 +359,11 @@ u64 plpks_get_signedupdatealgorithms(void)
return signedupdatealgorithms;
}
+u16 plpks_get_passwordlen(void)
+{
+ return ospasswordlength;
+}
+
bool plpks_is_available(void)
{
int rc;
--
2.39.1
From: Russell Currey <[email protected]>
Before interacting with the PLPKS, we ask the hypervisor to generate a
password for the current boot, which is then required for most further
PLPKS operations.
If we kexec into a new kernel, the new kernel will try and fail to
generate a new password, as the password has already been set.
Pass the password through to the new kernel via the device tree, in
/chosen/ibm,plpks-pw. Check for the presence of this property before
trying to generate a new password - if it exists, use the existing
password and remove it from the device tree.
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: New patch
v4: Fix compile when CONFIG_PSERIES_PLPKS=n (snowpatch)
Fix error handling on fdt_path_offset() call (ruscur)
v5: Fix DT property name in commit message (npiggin)
Clear prop in FDT during init to prevent password exposure (mpe)
Rework to remove ifdefs from C code (npiggin)
---
arch/powerpc/include/asm/plpks.h | 14 ++++++
arch/powerpc/kernel/prom.c | 4 ++
arch/powerpc/kexec/file_load_64.c | 15 +++++--
arch/powerpc/platforms/pseries/plpks.c | 60 ++++++++++++++++++++++++++
4 files changed, 90 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h
index 757313e00521..23b77027c916 100644
--- a/arch/powerpc/include/asm/plpks.h
+++ b/arch/powerpc/include/asm/plpks.h
@@ -176,6 +176,20 @@ u64 plpks_get_signedupdatealgorithms(void);
*/
u16 plpks_get_passwordlen(void);
+/**
+ * Called in early init to retrieve and clear the PLPKS password from the DT.
+ */
+void plpks_early_init_devtree(void);
+
+/**
+ * Populates the FDT with the PLPKS password to prepare for kexec.
+ */
+int plpks_populate_fdt(void *fdt);
+#else // CONFIG_PSERIES_PLPKS
+static inline bool plpks_is_available(void) { return false; }
+static inline u16 plpks_get_passwordlen(void) { BUILD_BUG(); }
+static inline void plpks_early_init_devtree(void) { }
+static inline int plpks_populate_fdt(void *fdt) { BUILD_BUG(); }
#endif // CONFIG_PSERIES_PLPKS
#endif // _ASM_POWERPC_PLPKS_H
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4f1c920aa13e..8a13b378770f 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -56,6 +56,7 @@
#include <asm/drmem.h>
#include <asm/ultravisor.h>
#include <asm/prom.h>
+#include <asm/plpks.h>
#include <mm/mmu_decl.h>
@@ -893,6 +894,9 @@ void __init early_init_devtree(void *params)
powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
#endif
+ /* If kexec left a PLPKS password in the DT, get it and clear it */
+ plpks_early_init_devtree();
+
tm_init();
DBG(" <- early_init_devtree()\n");
diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index af8854f9eae3..3f5740fb01a4 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -27,6 +27,7 @@
#include <asm/kexec_ranges.h>
#include <asm/crashdump-ppc64.h>
#include <asm/prom.h>
+#include <asm/plpks.h>
struct umem_info {
u64 *buf; /* data buffer for usable-memory property */
@@ -977,12 +978,16 @@ static unsigned int cpu_node_size(void)
*/
unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image)
{
- unsigned int cpu_nodes, extra_size;
+ unsigned int cpu_nodes, extra_size = 0;
struct device_node *dn;
u64 usm_entries;
+ // Make room for the PLPKS password, plus node overhead for ibm,plpks-pw.
+ if (plpks_is_available())
+ extra_size += (unsigned int)plpks_get_passwordlen() + 32;
+
if (image->type != KEXEC_TYPE_CRASH)
- return 0;
+ return extra_size;
/*
* For kdump kernel, account for linux,usable-memory and
@@ -992,7 +997,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image)
usm_entries = ((memblock_end_of_DRAM() / drmem_lmb_size()) +
(2 * (resource_size(&crashk_res) / drmem_lmb_size())));
- extra_size = (unsigned int)(usm_entries * sizeof(u64));
+ extra_size += (unsigned int)(usm_entries * sizeof(u64));
/*
* Get the number of CPU nodes in the current DT. This allows to
@@ -1230,6 +1235,10 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
}
}
+ // If we have PLPKS active, we need to provide the password to the new kernel
+ if (plpks_is_available())
+ ret = plpks_populate_fdt(fdt);
+
out:
kfree(rmem);
kfree(umem);
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index 6940280ae94a..481a669845c5 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -16,6 +16,9 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/types.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
+#include <linux/memblock.h>
#include <asm/hvcall.h>
#include <asm/machdep.h>
#include <asm/plpks.h>
@@ -128,6 +131,12 @@ static int plpks_gen_password(void)
u8 *password, consumer = PLPKS_OS_OWNER;
int rc;
+ // If we booted from kexec, we could be reusing an existing password already
+ if (ospassword) {
+ pr_debug("Password of length %u already in use\n", ospasswordlength);
+ return 0;
+ }
+
// The password must not cross a page boundary, so we align to the next power of 2
password = kzalloc(roundup_pow_of_two(maxpwsize), GFP_KERNEL);
if (!password)
@@ -621,6 +630,57 @@ int plpks_read_bootloader_var(struct plpks_var *var)
return plpks_read_var(PLPKS_BOOTLOADER_OWNER, var);
}
+int plpks_populate_fdt(void *fdt)
+{
+ int chosen_offset = fdt_path_offset(fdt, "/chosen");
+ if (chosen_offset < 0) {
+ pr_err("Can't find chosen node: %s\n",
+ fdt_strerror(chosen_offset));
+ return chosen_offset;
+ }
+
+ return fdt_setprop(fdt, chosen_offset, "ibm,plpks-pw", ospassword, ospasswordlength);
+}
+
+// Once a password is registered with the hypervisor it cannot be cleared without
+// rebooting the LPAR, so to keep using the PLPKS across kexec boots we need to
+// recover the previous password from the FDT.
+//
+// There are a few challenges here. We don't want the password to be visible to
+// users, so we need to clear it from the FDT. This has to be done in early boot.
+// Clearing it from the FDT would make the FDT's checksum invalid, so we have to
+// manually cause the checksum to be recalculated.
+void __init plpks_early_init_devtree(void)
+{
+ void *fdt = initial_boot_params;
+ int chosen_node = fdt_path_offset(fdt, "/chosen");
+ u8 *password;
+ int len;
+
+ if (chosen_node < 0)
+ return;
+
+ password = (u8 *)fdt_getprop(fdt, chosen_node, "ibm,plpks-pw", &len);
+ if (len <= 0) {
+ pr_debug("Couldn't find ibm,plpks-pw node.\n");
+ return;
+ }
+
+ ospassword = memblock_alloc_raw(len, SMP_CACHE_BYTES);
+ if (!ospassword) {
+ pr_err("Error allocating memory for password.\n");
+ goto out;
+ }
+
+ memcpy(ospassword, password, len);
+ ospasswordlength = (u16)len;
+
+out:
+ fdt_nop_property(fdt, chosen_node, "ibm,plpks-pw");
+ // Since we've cleared the password, we must update the FDT checksum
+ early_init_dt_verify(fdt);
+}
+
static __init int pseries_plpks_init(void)
{
int rc;
--
2.39.1
From: Russell Currey <[email protected]>
Add support for loading keys from the PLPKS on pseries machines, with the
"ibm,plpks-sb-v1" format.
The object format is expected to be the same, so there shouldn't be any
functional differences between objects retrieved on powernv or pseries.
Unlike on powernv, on pseries the format string isn't contained in the
device tree. Use secvar_ops->format() to fetch the format string in a
generic manner, rather than searching the device tree ourselves.
(The current code searches the device tree for a node compatible with
"ibm,edk2-compat-v1". This patch switches to calling secvar_ops->format(),
which in the case of OPAL/powernv means opal_secvar_format(), which
searches the device tree for a node compatible with "ibm,secvar-backend"
and checks its "format" property. These are equivalent, as skiboot creates
a node with both "ibm,edk2-compat-v1" and "ibm,secvar-backend" as
compatible strings.)
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: New patch
v4: Pass format buffer size (stefanb, npiggin)
v5: Use sizeof(buf) rather than stating the size twice (npiggin)
Clarify change to DT compatible strings in commit message (zohar)
Reword commit message a bit (ajd)
---
.../integrity/platform_certs/load_powerpc.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/security/integrity/platform_certs/load_powerpc.c b/security/integrity/platform_certs/load_powerpc.c
index dee51606d5f4..b9de70b90826 100644
--- a/security/integrity/platform_certs/load_powerpc.c
+++ b/security/integrity/platform_certs/load_powerpc.c
@@ -10,7 +10,6 @@
#include <linux/cred.h>
#include <linux/err.h>
#include <linux/slab.h>
-#include <linux/of.h>
#include <asm/secure_boot.h>
#include <asm/secvar.h>
#include "keyring_handler.h"
@@ -59,16 +58,22 @@ static int __init load_powerpc_certs(void)
void *db = NULL, *dbx = NULL;
u64 dbsize = 0, dbxsize = 0;
int rc = 0;
- struct device_node *node;
+ ssize_t len;
+ char buf[32];
if (!secvar_ops)
return -ENODEV;
- /* The following only applies for the edk2-compat backend. */
- node = of_find_compatible_node(NULL, NULL, "ibm,edk2-compat-v1");
- if (!node)
+ len = secvar_ops->format(buf, sizeof(buf));
+ if (len <= 0)
return -ENODEV;
+ // Check for known secure boot implementations from OPAL or PLPKS
+ if (strcmp("ibm,edk2-compat-v1", buf) && strcmp("ibm,plpks-sb-v1", buf)) {
+ pr_err("Unsupported secvar implementation \"%s\", not loading certs\n", buf);
+ return -ENODEV;
+ }
+
/*
* Get db, and dbx. They might not exist, so it isn't an error if we
* can't get them.
@@ -103,8 +108,6 @@ static int __init load_powerpc_certs(void)
kfree(dbx);
}
- of_node_put(node);
-
return rc;
}
late_initcall(load_powerpc_certs);
--
2.39.1
From: Michael Ellerman <[email protected]>
There's no reason for secvar_operations to use uint64_t vs the more
common kernel type u64.
The types are compatible, but they require different printk format
strings which can lead to confusion.
Change all the secvar related routines to use u64.
Signed-off-by: Michael Ellerman <[email protected]>
Reviewed-by: Russell Currey <[email protected]>
Reviewed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: Include new patch
---
arch/powerpc/include/asm/secvar.h | 9 +++------
arch/powerpc/kernel/secvar-sysfs.c | 8 ++++----
arch/powerpc/platforms/powernv/opal-secvar.c | 9 +++------
security/integrity/platform_certs/load_powerpc.c | 4 ++--
4 files changed, 12 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h
index 4cc35b58b986..07ba36f868a7 100644
--- a/arch/powerpc/include/asm/secvar.h
+++ b/arch/powerpc/include/asm/secvar.h
@@ -14,12 +14,9 @@
extern const struct secvar_operations *secvar_ops;
struct secvar_operations {
- int (*get)(const char *key, uint64_t key_len, u8 *data,
- uint64_t *data_size);
- int (*get_next)(const char *key, uint64_t *key_len,
- uint64_t keybufsize);
- int (*set)(const char *key, uint64_t key_len, u8 *data,
- uint64_t data_size);
+ int (*get)(const char *key, u64 key_len, u8 *data, u64 *data_size);
+ int (*get_next)(const char *key, u64 *key_len, u64 keybufsize);
+ int (*set)(const char *key, u64 key_len, u8 *data, u64 data_size);
};
#ifdef CONFIG_PPC_SECURE_BOOT
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
index 7fa5f8ed9542..702044edf14d 100644
--- a/arch/powerpc/kernel/secvar-sysfs.c
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -47,7 +47,7 @@ static ssize_t format_show(struct kobject *kobj, struct kobj_attribute *attr,
static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
{
- uint64_t dsize;
+ u64 dsize;
int rc;
rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
@@ -64,8 +64,8 @@ static ssize_t data_read(struct file *filep, struct kobject *kobj,
struct bin_attribute *attr, char *buf, loff_t off,
size_t count)
{
- uint64_t dsize;
char *data;
+ u64 dsize;
int rc;
rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
@@ -166,9 +166,9 @@ static int update_kobj_size(void)
static int secvar_sysfs_load(void)
{
- char *name;
- uint64_t namesize = 0;
struct kobject *kobj;
+ u64 namesize = 0;
+ char *name;
int rc;
name = kzalloc(NAME_MAX_SIZE, GFP_KERNEL);
diff --git a/arch/powerpc/platforms/powernv/opal-secvar.c b/arch/powerpc/platforms/powernv/opal-secvar.c
index 14133e120bdd..ef89861569e0 100644
--- a/arch/powerpc/platforms/powernv/opal-secvar.c
+++ b/arch/powerpc/platforms/powernv/opal-secvar.c
@@ -54,8 +54,7 @@ static int opal_status_to_err(int rc)
return err;
}
-static int opal_get_variable(const char *key, uint64_t ksize,
- u8 *data, uint64_t *dsize)
+static int opal_get_variable(const char *key, u64 ksize, u8 *data, u64 *dsize)
{
int rc;
@@ -71,8 +70,7 @@ static int opal_get_variable(const char *key, uint64_t ksize,
return opal_status_to_err(rc);
}
-static int opal_get_next_variable(const char *key, uint64_t *keylen,
- uint64_t keybufsize)
+static int opal_get_next_variable(const char *key, u64 *keylen, u64 keybufsize)
{
int rc;
@@ -88,8 +86,7 @@ static int opal_get_next_variable(const char *key, uint64_t *keylen,
return opal_status_to_err(rc);
}
-static int opal_set_variable(const char *key, uint64_t ksize, u8 *data,
- uint64_t dsize)
+static int opal_set_variable(const char *key, u64 ksize, u8 *data, u64 dsize)
{
int rc;
diff --git a/security/integrity/platform_certs/load_powerpc.c b/security/integrity/platform_certs/load_powerpc.c
index a2900cb85357..1e4f80a4e71c 100644
--- a/security/integrity/platform_certs/load_powerpc.c
+++ b/security/integrity/platform_certs/load_powerpc.c
@@ -18,7 +18,7 @@
/*
* Get a certificate list blob from the named secure variable.
*/
-static __init void *get_cert_list(u8 *key, unsigned long keylen, uint64_t *size)
+static __init void *get_cert_list(u8 *key, unsigned long keylen, u64 *size)
{
int rc;
void *db;
@@ -51,7 +51,7 @@ static __init void *get_cert_list(u8 *key, unsigned long keylen, uint64_t *size)
static int __init load_powerpc_certs(void)
{
void *db = NULL, *dbx = NULL;
- uint64_t dbsize = 0, dbxsize = 0;
+ u64 dbsize = 0, dbxsize = 0;
int rc = 0;
struct device_node *node;
--
2.39.1
From: Russell Currey <[email protected]>
The pseries platform can support dynamic secure boot (i.e. secure boot
using user-defined keys) using variables contained with the PowerVM LPAR
Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the
relevant variables for pseries dynamic secure boot through the existing
secvar filesystem layout.
The relevant variables for dynamic secure boot are signed in the
keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
Object labels in the keystore are encoded using ucs2 format. With our
fixed variable names we don't have to care about encoding outside of the
necessary byte padding.
When a user writes to a variable, the first 8 bytes of data must contain
the signed update flags as defined by the hypervisor.
When a user reads a variable, the first 4 bytes of data contain the
policies defined for the object.
Limitations exist due to the underlying implementation of sysfs binary
attributes, as is the case for the OPAL secvar implementation -
partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
(Even when using bin_attributes, which can be larger than a single page,
sysfs only gives us one page's worth of write buffer at a time, and the
hypervisor does not expose an interface for partial writes.)
Co-developed-by: Nayna Jain <[email protected]>
Signed-off-by: Nayna Jain <[email protected]>
Co-developed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v2: Remove unnecessary config vars from sysfs and document the others,
thanks to review from Greg. If we end up needing to expose more, we
can add them later and update the docs.
Use sysfs_emit() instead of sprintf(), thanks to Greg.
Change the size of the sysfs binary attributes to include the 8-byte
flags header, preventing truncation of large writes.
v3: plpks_set_variable(): pass var to plpks_signed_update_var() as a
pointer (mpe)
Update copyright date (ajd)
Consistent comment style (ajd)
Change device_initcall() to machine_arch_initcall(pseries...) so we
don't try to load on powernv and kill the machine (mpe)
Add config attributes into plpks_secvar_ops (mpe)
Get rid of PLPKS_SECVAR_COUNT macro (mpe)
Reworded descriptions in ABI documentation (mpe)
Switch to using secvar_ops->var_names rather than
secvar_ops->get_next() (ajd/mpe)
Optimise allocation/copying of buffers (mpe)
Elaborate the comment documenting the "format" string (mpe)
Return -EIO on errors in the read case (mpe)
Add "grubdbx" variable (Sudhakar Kuppusamy)
Use utf8s_to_utf16s() rather than our own "UCS-2" conversion code (mpe)
Change uint64_t to u64 (mpe)
Fix SB_VERSION data length (ruscur)
Stop prepending policy data on read (ruscur)
Enforce max format length on format string (not strictly needed, but
makes the length limit clear) (ajd)
Update include of plpks.h to reflect new path (ruscur)
Consistent constant naming scheme (ruscur)
v4: Return set_secvar_ops() return code
Pass buffer size to plpks_secvar_format() (stefanb, npiggin)
Add missing null check (stefanb)
Add comment to commit message explaining PAGE_SIZE write limit (joel)
v5: Add comment explaining why we use "key_len - 1" (npiggin)
Use strlen(var.name) instead of hardcoding 10 as length of
"SB_VERSION" (npiggin)
Improve comments about use of SB_VERSION and format string (npiggin)
Change "+ 8" to "+ sizeof(u64)" when accounting for flags size in
working out file's max size (npiggin)
Compile plpks-secvar.c based on CONFIG_PPC_SECURE_BOOT, not
CONFIG_PPC_SECVAR_SYSFS, as the secvar backend is needed for loading
keys into keyrings even if the sysfs interface is disabled (ajd)
---
Documentation/ABI/testing/sysfs-secvar | 75 +++++-
arch/powerpc/platforms/pseries/Makefile | 4 +-
arch/powerpc/platforms/pseries/plpks-secvar.c | 219 ++++++++++++++++++
3 files changed, 295 insertions(+), 3 deletions(-)
create mode 100644 arch/powerpc/platforms/pseries/plpks-secvar.c
diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
index feebb8c57294..a19f4d5fcec6 100644
--- a/Documentation/ABI/testing/sysfs-secvar
+++ b/Documentation/ABI/testing/sysfs-secvar
@@ -18,6 +18,14 @@ Description: A string indicating which backend is in use by the firmware.
This determines the format of the variable and the accepted
format of variable updates.
+ On powernv/OPAL, this value is provided by the OPAL firmware
+ and is expected to be "ibm,edk2-compat-v1".
+
+ On pseries/PLPKS, this is generated by the kernel based on the
+ version number in the SB_VERSION variable in the keystore, and
+ has the form "ibm,plpks-sb-v<version>", or
+ "ibm,plpks-sb-unknown" if there is no SB_VERSION variable.
+
What: /sys/firmware/secvar/vars/<variable name>
Date: August 2019
Contact: Nayna Jain <[email protected]>
@@ -34,7 +42,7 @@ Description: An integer representation of the size of the content of the
What: /sys/firmware/secvar/vars/<variable_name>/data
Date: August 2019
-Contact: Nayna Jain h<[email protected]>
+Contact: Nayna Jain <[email protected]>
Description: A read-only file containing the value of the variable. The size
of the file represents the maximum size of the variable data.
@@ -44,3 +52,68 @@ Contact: Nayna Jain <[email protected]>
Description: A write-only file that is used to submit the new value for the
variable. The size of the file represents the maximum size of
the variable data that can be written.
+
+What: /sys/firmware/secvar/config
+Date: December 2022
+Contact: Nayna Jain <[email protected]>
+Description: This optional directory contains read-only config attributes as
+ defined by the secure variable implementation. All data is in
+ ASCII format. The directory is only created if the backing
+ implementation provides variables to populate it, which at
+ present is only PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/version
+Date: December 2022
+Contact: Nayna Jain <[email protected]>
+Description: Config version as reported by the hypervisor in ASCII decimal
+ format.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/max_object_size
+Date: December 2022
+Contact: Nayna Jain <[email protected]>
+Description: Maximum allowed size of objects in the keystore in bytes,
+ represented in ASCII decimal format.
+
+ This is not necessarily the same as the max size that can be
+ written to an update file as writes can contain more than
+ object data, you should use the size of the update file for
+ that purpose.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/total_size
+Date: December 2022
+Contact: Nayna Jain <[email protected]>
+Description: Total size of the PLPKS in bytes, represented in ASCII decimal
+ format.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/used_space
+Date: December 2022
+Contact: Nayna Jain <[email protected]>
+Description: Current space consumed by the key store, in bytes, represented
+ in ASCII decimal format.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/supported_policies
+Date: December 2022
+Contact: Nayna Jain <[email protected]>
+Description: Bitmask of supported policy flags by the hypervisor,
+ represented as an 8 byte hexadecimal ASCII string. Consult the
+ hypervisor documentation for what these flags are.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/signed_update_algorithms
+Date: December 2022
+Contact: Nayna Jain <[email protected]>
+Description: Bitmask of flags indicating which algorithms the hypervisor
+ supports for signed update of objects, represented as a 16 byte
+ hexadecimal ASCII string. Consult the hypervisor documentation
+ for what these flags mean.
+
+ Currently only provided by PLPKS on the pseries platform.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 92310202bdd7..20a0f3c3fe04 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -27,8 +27,8 @@ obj-$(CONFIG_PAPR_SCM) += papr_scm.o
obj-$(CONFIG_PPC_SPLPAR) += vphn.o
obj-$(CONFIG_PPC_SVM) += svm.o
obj-$(CONFIG_FA_DUMP) += rtas-fadump.o
-obj-$(CONFIG_PSERIES_PLPKS) += plpks.o
-
+obj-$(CONFIG_PSERIES_PLPKS) += plpks.o
+obj-$(CONFIG_PPC_SECURE_BOOT) += plpks-secvar.o
obj-$(CONFIG_SUSPEND) += suspend.o
obj-$(CONFIG_PPC_VAS) += vas.o vas-sysfs.o
diff --git a/arch/powerpc/platforms/pseries/plpks-secvar.c b/arch/powerpc/platforms/pseries/plpks-secvar.c
new file mode 100644
index 000000000000..04e6cc3f9dd8
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/plpks-secvar.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+// Secure variable implementation using the PowerVM LPAR Platform KeyStore (PLPKS)
+//
+// Copyright 2022, 2023 IBM Corporation
+// Authors: Russell Currey
+// Andrew Donnellan
+// Nayna Jain
+
+#define pr_fmt(fmt) "secvar: "fmt
+
+#include <linux/printk.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/kobject.h>
+#include <linux/nls.h>
+#include <asm/machdep.h>
+#include <asm/secvar.h>
+#include <asm/plpks.h>
+
+// Config attributes for sysfs
+#define PLPKS_CONFIG_ATTR(name, fmt, func) \
+ static ssize_t name##_show(struct kobject *kobj, \
+ struct kobj_attribute *attr, \
+ char *buf) \
+ { \
+ return sysfs_emit(buf, fmt, func()); \
+ } \
+ static struct kobj_attribute attr_##name = __ATTR_RO(name)
+
+PLPKS_CONFIG_ATTR(version, "%u\n", plpks_get_version);
+PLPKS_CONFIG_ATTR(max_object_size, "%u\n", plpks_get_maxobjectsize);
+PLPKS_CONFIG_ATTR(total_size, "%u\n", plpks_get_totalsize);
+PLPKS_CONFIG_ATTR(used_space, "%u\n", plpks_get_usedspace);
+PLPKS_CONFIG_ATTR(supported_policies, "%08x\n", plpks_get_supportedpolicies);
+PLPKS_CONFIG_ATTR(signed_update_algorithms, "%016llx\n", plpks_get_signedupdatealgorithms);
+
+static const struct attribute *config_attrs[] = {
+ &attr_version.attr,
+ &attr_max_object_size.attr,
+ &attr_total_size.attr,
+ &attr_used_space.attr,
+ &attr_supported_policies.attr,
+ &attr_signed_update_algorithms.attr,
+ NULL,
+};
+
+static u32 get_policy(const char *name)
+{
+ if ((strcmp(name, "db") == 0) ||
+ (strcmp(name, "dbx") == 0) ||
+ (strcmp(name, "grubdb") == 0) ||
+ (strcmp(name, "grubdbx") == 0) ||
+ (strcmp(name, "sbat") == 0))
+ return (PLPKS_WORLDREADABLE | PLPKS_SIGNEDUPDATE);
+ else
+ return PLPKS_SIGNEDUPDATE;
+}
+
+static const char * const plpks_var_names[] = {
+ "PK",
+ "KEK",
+ "db",
+ "dbx",
+ "grubdb",
+ "grubdbx",
+ "sbat",
+ "moduledb",
+ "trustedcadb",
+ NULL,
+};
+
+static int plpks_get_variable(const char *key, u64 key_len, u8 *data,
+ u64 *data_size)
+{
+ struct plpks_var var = {0};
+ int rc = 0;
+
+ // We subtract 1 from key_len because we don't need to include the
+ // null terminator at the end of the string
+ var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
+ if (!var.name)
+ return -ENOMEM;
+ rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
+ key_len - 1);
+ if (rc < 0)
+ goto err;
+ var.namelen = rc * 2;
+
+ var.os = PLPKS_VAR_LINUX;
+ if (data) {
+ var.data = data;
+ var.datalen = *data_size;
+ }
+ rc = plpks_read_os_var(&var);
+
+ if (rc)
+ goto err;
+
+ *data_size = var.datalen;
+
+err:
+ kfree(var.name);
+ if (rc && rc != -ENOENT) {
+ pr_err("Failed to read variable '%s': %d\n", key, rc);
+ // Return -EIO since userspace probably doesn't care about the
+ // specific error
+ rc = -EIO;
+ }
+ return rc;
+}
+
+static int plpks_set_variable(const char *key, u64 key_len, u8 *data,
+ u64 data_size)
+{
+ struct plpks_var var = {0};
+ int rc = 0;
+ u64 flags;
+
+ // Secure variables need to be prefixed with 8 bytes of flags.
+ // We only want to perform the write if we have at least one byte of data.
+ if (data_size <= sizeof(flags))
+ return -EINVAL;
+
+ // We subtract 1 from key_len because we don't need to include the
+ // null terminator at the end of the string
+ var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
+ if (!var.name)
+ return -ENOMEM;
+ rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
+ key_len - 1);
+ if (rc < 0)
+ goto err;
+ var.namelen = rc * 2;
+
+ memcpy(&flags, data, sizeof(flags));
+
+ var.datalen = data_size - sizeof(flags);
+ var.data = data + sizeof(flags);
+ var.os = PLPKS_VAR_LINUX;
+ var.policy = get_policy(key);
+
+ // Unlike in the read case, the plpks error code can be useful to
+ // userspace on write, so we return it rather than just -EIO
+ rc = plpks_signed_update_var(&var, flags);
+
+err:
+ kfree(var.name);
+ return rc;
+}
+
+// PLPKS dynamic secure boot doesn't give us a format string in the same way OPAL does.
+// Instead, report the format using the SB_VERSION variable in the keystore.
+// The string is made up by us, and takes the form "ibm,plpks-sb-v<n>" (or "ibm,plpks-sb-unknown"
+// if the SB_VERSION variable doesn't exist). Hypervisor defines the SB_VERSION variable as a
+// "1 byte unsigned integer value".
+static ssize_t plpks_secvar_format(char *buf, size_t bufsize)
+{
+ struct plpks_var var = {0};
+ ssize_t ret;
+
+ var.component = NULL;
+ // Only the signed variables have null bytes in their names, this one doesn't
+ var.name = "SB_VERSION";
+ var.namelen = strlen(var.name);
+ var.datalen = 1;
+ var.data = kzalloc(1, GFP_KERNEL);
+ if (!var.data)
+ return -ENOMEM;
+
+ // Unlike the other vars, SB_VERSION is owned by firmware instead of the OS
+ ret = plpks_read_fw_var(&var);
+ if (ret) {
+ if (ret == -ENOENT) {
+ ret = snprintf(buf, bufsize, "ibm,plpks-sb-unknown");
+ } else {
+ pr_err("Error %ld reading SB_VERSION from firmware\n", ret);
+ ret = -EIO;
+ }
+ goto err;
+ }
+
+ ret = snprintf(buf, bufsize, "ibm,plpks-sb-v%hhu", var.data[0]);
+
+err:
+ kfree(var.data);
+ return ret;
+}
+
+static int plpks_max_size(u64 *max_size)
+{
+ // The max object size reported by the hypervisor is accurate for the
+ // object itself, but we use the first 8 bytes of data on write as the
+ // signed update flags, so the max size a user can write is larger.
+ *max_size = (u64)plpks_get_maxobjectsize() + sizeof(u64);
+
+ return 0;
+}
+
+
+static const struct secvar_operations plpks_secvar_ops = {
+ .get = plpks_get_variable,
+ .set = plpks_set_variable,
+ .format = plpks_secvar_format,
+ .max_size = plpks_max_size,
+ .config_attrs = config_attrs,
+ .var_names = plpks_var_names,
+};
+
+static int plpks_secvar_init(void)
+{
+ if (!plpks_is_available())
+ return -ENODEV;
+
+ return set_secvar_ops(&plpks_secvar_ops);
+}
+machine_device_initcall(pseries, plpks_secvar_init);
--
2.39.1
From: Russell Currey <[email protected]>
Move the constants defined in plpks.c to plpks.h, and standardise their
naming, so that PLPKS consumers can make use of them later on.
Signed-off-by: Russell Currey <[email protected]>
Co-developed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: New patch
---
arch/powerpc/include/asm/plpks.h | 36 +++++++++++++---
arch/powerpc/platforms/pseries/plpks.c | 57 ++++++++++----------------
2 files changed, 53 insertions(+), 40 deletions(-)
diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h
index 8295502ee93b..6466aadd7145 100644
--- a/arch/powerpc/include/asm/plpks.h
+++ b/arch/powerpc/include/asm/plpks.h
@@ -14,14 +14,40 @@
#include <linux/types.h>
#include <linux/list.h>
-#define OSSECBOOTAUDIT 0x40000000
-#define OSSECBOOTENFORCE 0x20000000
-#define WORLDREADABLE 0x08000000
-#define SIGNEDUPDATE 0x01000000
+// Object policy flags from supported_policies
+#define PLPKS_OSSECBOOTAUDIT PPC_BIT32(1) // OS secure boot must be audit/enforce
+#define PLPKS_OSSECBOOTENFORCE PPC_BIT32(2) // OS secure boot must be enforce
+#define PLPKS_PWSET PPC_BIT32(3) // No access without password set
+#define PLPKS_WORLDREADABLE PPC_BIT32(4) // Readable without authentication
+#define PLPKS_IMMUTABLE PPC_BIT32(5) // Once written, object cannot be removed
+#define PLPKS_TRANSIENT PPC_BIT32(6) // Object does not persist through reboot
+#define PLPKS_SIGNEDUPDATE PPC_BIT32(7) // Object can only be modified by signed updates
+#define PLPKS_HVPROVISIONED PPC_BIT32(28) // Hypervisor has provisioned this object
-#define PLPKS_VAR_LINUX 0x02
+// Signature algorithm flags from signed_update_algorithms
+#define PLPKS_ALG_RSA2048 PPC_BIT(0)
+#define PLPKS_ALG_RSA4096 PPC_BIT(1)
+
+// Object label OS metadata flags
+#define PLPKS_VAR_LINUX 0x02
#define PLPKS_VAR_COMMON 0x04
+// Flags for which consumer owns an object is owned by
+#define PLPKS_FW_OWNER 0x1
+#define PLPKS_BOOTLOADER_OWNER 0x2
+#define PLPKS_OS_OWNER 0x3
+
+// Flags for label metadata fields
+#define PLPKS_LABEL_VERSION 0
+#define PLPKS_MAX_LABEL_ATTR_SIZE 16
+#define PLPKS_MAX_NAME_SIZE 239
+#define PLPKS_MAX_DATA_SIZE 4000
+
+// Timeouts for PLPKS operations
+#define PLPKS_MAX_TIMEOUT 5000 // msec
+#define PLPKS_FLUSH_SLEEP 10 // msec
+#define PLPKS_FLUSH_SLEEP_RANGE 400
+
struct plpks_var {
char *component;
u8 *name;
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index 13e6daadb179..91f3f623a2c7 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -20,19 +20,6 @@
#include <asm/machdep.h>
#include <asm/plpks.h>
-#define PKS_FW_OWNER 0x1
-#define PKS_BOOTLOADER_OWNER 0x2
-#define PKS_OS_OWNER 0x3
-
-#define LABEL_VERSION 0
-#define MAX_LABEL_ATTR_SIZE 16
-#define MAX_NAME_SIZE 239
-#define MAX_DATA_SIZE 4000
-
-#define PKS_FLUSH_MAX_TIMEOUT 5000 //msec
-#define PKS_FLUSH_SLEEP 10 //msec
-#define PKS_FLUSH_SLEEP_RANGE 400
-
static u8 *ospassword;
static u16 ospasswordlength;
@@ -59,7 +46,7 @@ struct label_attr {
struct label {
struct label_attr attr;
- u8 name[MAX_NAME_SIZE];
+ u8 name[PLPKS_MAX_NAME_SIZE];
size_t size;
};
@@ -122,7 +109,7 @@ static int pseries_status_to_err(int rc)
static int plpks_gen_password(void)
{
unsigned long retbuf[PLPAR_HCALL_BUFSIZE] = { 0 };
- u8 *password, consumer = PKS_OS_OWNER;
+ u8 *password, consumer = PLPKS_OS_OWNER;
int rc;
// The password must not cross a page boundary, so we align to the next power of 2
@@ -159,7 +146,7 @@ static struct plpks_auth *construct_auth(u8 consumer)
{
struct plpks_auth *auth;
- if (consumer > PKS_OS_OWNER)
+ if (consumer > PLPKS_OS_OWNER)
return ERR_PTR(-EINVAL);
// The auth structure must not cross a page boundary and must be
@@ -171,7 +158,7 @@ static struct plpks_auth *construct_auth(u8 consumer)
auth->version = 1;
auth->consumer = consumer;
- if (consumer == PKS_FW_OWNER || consumer == PKS_BOOTLOADER_OWNER)
+ if (consumer == PLPKS_FW_OWNER || consumer == PLPKS_BOOTLOADER_OWNER)
return auth;
memcpy(auth->password, ospassword, ospasswordlength);
@@ -191,7 +178,7 @@ static struct label *construct_label(char *component, u8 varos, u8 *name,
struct label *label;
size_t slen;
- if (!name || namelen > MAX_NAME_SIZE)
+ if (!name || namelen > PLPKS_MAX_NAME_SIZE)
return ERR_PTR(-EINVAL);
slen = strlen(component);
@@ -206,9 +193,9 @@ static struct label *construct_label(char *component, u8 varos, u8 *name,
if (component)
memcpy(&label->attr.prefix, component, slen);
- label->attr.version = LABEL_VERSION;
+ label->attr.version = PLPKS_LABEL_VERSION;
label->attr.os = varos;
- label->attr.length = MAX_LABEL_ATTR_SIZE;
+ label->attr.length = PLPKS_MAX_LABEL_ATTR_SIZE;
memcpy(&label->name, name, namelen);
label->size = sizeof(struct label_attr) + namelen;
@@ -274,10 +261,10 @@ static int plpks_confirm_object_flushed(struct label *label,
break;
}
- usleep_range(PKS_FLUSH_SLEEP,
- PKS_FLUSH_SLEEP + PKS_FLUSH_SLEEP_RANGE);
- timeout = timeout + PKS_FLUSH_SLEEP;
- } while (timeout < PKS_FLUSH_MAX_TIMEOUT);
+ usleep_range(PLPKS_FLUSH_SLEEP,
+ PLPKS_FLUSH_SLEEP + PLPKS_FLUSH_SLEEP_RANGE);
+ timeout = timeout + PLPKS_FLUSH_SLEEP;
+ } while (timeout < PLPKS_MAX_TIMEOUT);
if (timed_out)
return -ETIMEDOUT;
@@ -293,13 +280,13 @@ int plpks_write_var(struct plpks_var var)
int rc;
if (!var.component || !var.data || var.datalen <= 0 ||
- var.namelen > MAX_NAME_SIZE || var.datalen > MAX_DATA_SIZE)
+ var.namelen > PLPKS_MAX_NAME_SIZE || var.datalen > PLPKS_MAX_DATA_SIZE)
return -EINVAL;
- if (var.policy & SIGNEDUPDATE)
+ if (var.policy & PLPKS_SIGNEDUPDATE)
return -EINVAL;
- auth = construct_auth(PKS_OS_OWNER);
+ auth = construct_auth(PLPKS_OS_OWNER);
if (IS_ERR(auth))
return PTR_ERR(auth);
@@ -331,10 +318,10 @@ int plpks_remove_var(char *component, u8 varos, struct plpks_var_name vname)
struct label *label;
int rc;
- if (!component || vname.namelen > MAX_NAME_SIZE)
+ if (!component || vname.namelen > PLPKS_MAX_NAME_SIZE)
return -EINVAL;
- auth = construct_auth(PKS_OS_OWNER);
+ auth = construct_auth(PLPKS_OS_OWNER);
if (IS_ERR(auth))
return PTR_ERR(auth);
@@ -366,14 +353,14 @@ static int plpks_read_var(u8 consumer, struct plpks_var *var)
u8 *output;
int rc;
- if (var->namelen > MAX_NAME_SIZE)
+ if (var->namelen > PLPKS_MAX_NAME_SIZE)
return -EINVAL;
auth = construct_auth(consumer);
if (IS_ERR(auth))
return PTR_ERR(auth);
- if (consumer == PKS_OS_OWNER) {
+ if (consumer == PLPKS_OS_OWNER) {
label = construct_label(var->component, var->os, var->name,
var->namelen);
if (IS_ERR(label)) {
@@ -388,7 +375,7 @@ static int plpks_read_var(u8 consumer, struct plpks_var *var)
goto out_free_label;
}
- if (consumer == PKS_OS_OWNER)
+ if (consumer == PLPKS_OS_OWNER)
rc = plpar_hcall(H_PKS_READ_OBJECT, retbuf, virt_to_phys(auth),
virt_to_phys(label), label->size, virt_to_phys(output),
maxobjsize);
@@ -428,17 +415,17 @@ static int plpks_read_var(u8 consumer, struct plpks_var *var)
int plpks_read_os_var(struct plpks_var *var)
{
- return plpks_read_var(PKS_OS_OWNER, var);
+ return plpks_read_var(PLPKS_OS_OWNER, var);
}
int plpks_read_fw_var(struct plpks_var *var)
{
- return plpks_read_var(PKS_FW_OWNER, var);
+ return plpks_read_var(PLPKS_FW_OWNER, var);
}
int plpks_read_bootloader_var(struct plpks_var *var)
{
- return plpks_read_var(PKS_BOOTLOADER_OWNER, var);
+ return plpks_read_var(PLPKS_BOOTLOADER_OWNER, var);
}
static __init int pseries_plpks_init(void)
--
2.39.1
From: Nayna Jain <[email protected]>
The Platform Keystore provides a signed update interface which can be used
to create, replace or append to certain variables in the PKS in a secure
fashion, with the hypervisor requiring that the update be signed using the
Platform Key.
Implement an interface to the H_PKS_SIGNED_UPDATE hcall in the plpks
driver to allow signed updates to PKS objects.
(The plpks driver doesn't need to do any cryptography or otherwise handle
the actual signed variable contents - that will be handled by userspace
tooling.)
Signed-off-by: Nayna Jain <[email protected]>
[ajd: split patch, add timeout handling and misc cleanups]
Co-developed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v3: Merge plpks fixes and signed update series with secvar series
Fix error code handling in plpks_confirm_object_flushed() (ruscur)
Pass plpks_var struct to plpks_signed_update_var() by reference (mpe)
Consistent constant naming scheme (ruscur)
v4: Fix MAX_HCALL_OPCODE rebasing issue (npiggin)
v5: Drop the EXPORT_SYMBOL since we don't need it (npiggin)
Return an error if plpks_signed_update_var() is called with non-NULL
component (npiggin)
---
arch/powerpc/include/asm/hvcall.h | 1 +
arch/powerpc/include/asm/plpks.h | 5 ++
arch/powerpc/platforms/pseries/plpks.c | 74 ++++++++++++++++++++++++--
3 files changed, 75 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 95fd7f9485d5..c099780385dd 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -335,6 +335,7 @@
#define H_RPT_INVALIDATE 0x448
#define H_SCM_FLUSH 0x44C
#define H_GET_ENERGY_SCALE_INFO 0x450
+#define H_PKS_SIGNED_UPDATE 0x454
#define H_WATCHDOG 0x45C
#define MAX_HCALL_OPCODE H_WATCHDOG
diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h
index 7c5f51a9af7c..e7204e6c0ca4 100644
--- a/arch/powerpc/include/asm/plpks.h
+++ b/arch/powerpc/include/asm/plpks.h
@@ -68,6 +68,11 @@ struct plpks_var_name_list {
struct plpks_var_name varlist[];
};
+/**
+ * Updates the authenticated variable. It expects NULL as the component.
+ */
+int plpks_signed_update_var(struct plpks_var *var, u64 flags);
+
/**
* Writes the specified var and its data to PKS.
* Any caller of PKS driver should present a valid component type for
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index 1189246b03dc..cee06fb9a370 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -81,6 +81,12 @@ static int pseries_status_to_err(int rc)
err = -ENOENT;
break;
case H_BUSY:
+ case H_LONG_BUSY_ORDER_1_MSEC:
+ case H_LONG_BUSY_ORDER_10_MSEC:
+ case H_LONG_BUSY_ORDER_100_MSEC:
+ case H_LONG_BUSY_ORDER_1_SEC:
+ case H_LONG_BUSY_ORDER_10_SEC:
+ case H_LONG_BUSY_ORDER_100_SEC:
err = -EBUSY;
break;
case H_AUTHORITY:
@@ -184,14 +190,17 @@ static struct label *construct_label(char *component, u8 varos, u8 *name,
u16 namelen)
{
struct label *label;
- size_t slen;
+ size_t slen = 0;
if (!name || namelen > PLPKS_MAX_NAME_SIZE)
return ERR_PTR(-EINVAL);
- slen = strlen(component);
- if (component && slen > sizeof(label->attr.prefix))
- return ERR_PTR(-EINVAL);
+ // Support NULL component for signed updates
+ if (component) {
+ slen = strlen(component);
+ if (slen > sizeof(label->attr.prefix))
+ return ERR_PTR(-EINVAL);
+ }
// The label structure must not cross a page boundary, so we align to the next power of 2
label = kzalloc(roundup_pow_of_two(sizeof(*label)), GFP_KERNEL);
@@ -397,6 +406,61 @@ static int plpks_confirm_object_flushed(struct label *label,
return pseries_status_to_err(rc);
}
+int plpks_signed_update_var(struct plpks_var *var, u64 flags)
+{
+ unsigned long retbuf[PLPAR_HCALL9_BUFSIZE] = {0};
+ int rc;
+ struct label *label;
+ struct plpks_auth *auth;
+ u64 continuetoken = 0;
+ u64 timeout = 0;
+
+ if (!var->data || var->datalen <= 0 || var->namelen > PLPKS_MAX_NAME_SIZE)
+ return -EINVAL;
+
+ if (!(var->policy & PLPKS_SIGNEDUPDATE))
+ return -EINVAL;
+
+ // Signed updates need the component to be NULL.
+ if (var->component)
+ return -EINVAL;
+
+ auth = construct_auth(PLPKS_OS_OWNER);
+ if (IS_ERR(auth))
+ return PTR_ERR(auth);
+
+ label = construct_label(var->component, var->os, var->name, var->namelen);
+ if (IS_ERR(label)) {
+ rc = PTR_ERR(label);
+ goto out;
+ }
+
+ do {
+ rc = plpar_hcall9(H_PKS_SIGNED_UPDATE, retbuf,
+ virt_to_phys(auth), virt_to_phys(label),
+ label->size, var->policy, flags,
+ virt_to_phys(var->data), var->datalen,
+ continuetoken);
+
+ continuetoken = retbuf[0];
+ if (pseries_status_to_err(rc) == -EBUSY) {
+ int delay_ms = get_longbusy_msecs(rc);
+ mdelay(delay_ms);
+ timeout += delay_ms;
+ }
+ rc = pseries_status_to_err(rc);
+ } while (rc == -EBUSY && timeout < PLPKS_MAX_TIMEOUT);
+
+ if (!rc)
+ rc = plpks_confirm_object_flushed(label, auth);
+
+ kfree(label);
+out:
+ kfree(auth);
+
+ return rc;
+}
+
int plpks_write_var(struct plpks_var var)
{
unsigned long retbuf[PLPAR_HCALL_BUFSIZE] = { 0 };
@@ -443,7 +507,7 @@ int plpks_remove_var(char *component, u8 varos, struct plpks_var_name vname)
struct label *label;
int rc;
- if (!component || vname.namelen > PLPKS_MAX_NAME_SIZE)
+ if (vname.namelen > PLPKS_MAX_NAME_SIZE)
return -EINVAL;
auth = construct_auth(PLPKS_OS_OWNER);
--
2.39.1
Currently, the list of variables is populated by calling
secvar_ops->get_next() repeatedly, which is explicitly modelled on the
OPAL API (including the keylen parameter).
For the upcoming PLPKS backend, we have a static list of variable names.
It is messy to fit that into get_next(), so instead, let the backend put
a NULL-terminated array of variable names into secvar_ops->var_names,
which will be used if get_next() is undefined.
Signed-off-by: Andrew Donnellan <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v3: New patch (ajd/mpe)
---
arch/powerpc/include/asm/secvar.h | 4 ++
arch/powerpc/kernel/secvar-sysfs.c | 67 ++++++++++++++++++++----------
2 files changed, 50 insertions(+), 21 deletions(-)
diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h
index 011a53a8076c..4828e0ab7e3c 100644
--- a/arch/powerpc/include/asm/secvar.h
+++ b/arch/powerpc/include/asm/secvar.h
@@ -21,6 +21,10 @@ struct secvar_operations {
ssize_t (*format)(char *buf, size_t bufsize);
int (*max_size)(u64 *max_size);
const struct attribute **config_attrs;
+
+ // NULL-terminated array of fixed variable names
+ // Only used if get_next() isn't provided
+ const char * const *var_names;
};
#ifdef CONFIG_PPC_SECURE_BOOT
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
index 7df32be86507..2cbc60b37e4e 100644
--- a/arch/powerpc/kernel/secvar-sysfs.c
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -157,9 +157,31 @@ static int secvar_sysfs_config(struct kobject *kobj)
return 0;
}
-static int secvar_sysfs_load(void)
+static int add_var(const char *name)
{
struct kobject *kobj;
+ int rc;
+
+ kobj = kzalloc(sizeof(*kobj), GFP_KERNEL);
+ if (!kobj)
+ return -ENOMEM;
+
+ kobject_init(kobj, &secvar_ktype);
+
+ rc = kobject_add(kobj, &secvar_kset->kobj, "%s", name);
+ if (rc) {
+ pr_warn("kobject_add error %d for attribute: %s\n", rc,
+ name);
+ kobject_put(kobj);
+ return rc;
+ }
+
+ kobject_uevent(kobj, KOBJ_ADD);
+ return 0;
+}
+
+static int secvar_sysfs_load(void)
+{
u64 namesize = 0;
char *name;
int rc;
@@ -179,31 +201,26 @@ static int secvar_sysfs_load(void)
break;
}
- kobj = kzalloc(sizeof(*kobj), GFP_KERNEL);
- if (!kobj) {
- rc = -ENOMEM;
- break;
- }
-
- kobject_init(kobj, &secvar_ktype);
-
- rc = kobject_add(kobj, &secvar_kset->kobj, "%s", name);
- if (rc) {
- pr_warn("kobject_add error %d for attribute: %s\n", rc,
- name);
- kobject_put(kobj);
- kobj = NULL;
- }
-
- if (kobj)
- kobject_uevent(kobj, KOBJ_ADD);
-
+ rc = add_var(name);
} while (!rc);
kfree(name);
return rc;
}
+static int secvar_sysfs_load_static(void)
+{
+ const char * const *name_ptr = secvar_ops->var_names;
+ int rc;
+ while (*name_ptr) {
+ rc = add_var(*name_ptr);
+ if (rc)
+ return rc;
+ name_ptr++;
+ }
+ return 0;
+}
+
static int secvar_sysfs_init(void)
{
int rc;
@@ -245,7 +262,15 @@ static int secvar_sysfs_init(void)
goto err;
}
- secvar_sysfs_load();
+ if (secvar_ops->get_next)
+ rc = secvar_sysfs_load();
+ else
+ rc = secvar_sysfs_load_static();
+
+ if (rc) {
+ pr_err("Failed to create variable attributes\n");
+ goto err;
+ }
return 0;
err:
--
2.39.1
From: Russell Currey <[email protected]>
The code that handles the format string in secvar-sysfs.c is entirely
OPAL specific, so create a new "format" op in secvar_operations to make
the secvar code more generic. No functional change.
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v2: Use sysfs_emit() instead of sprintf() (gregkh)
v3: Enforce format string size limit (ruscur)
v4: Pass the buffer size as an argument, not using a macro (stefanb,
npiggin)
Fix error reporting (npiggin)
---
arch/powerpc/include/asm/secvar.h | 1 +
arch/powerpc/kernel/secvar-sysfs.c | 27 +++++++-------------
arch/powerpc/platforms/powernv/opal-secvar.c | 25 ++++++++++++++++++
3 files changed, 35 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h
index a2b5f2203dc5..1a2c696a48ad 100644
--- a/arch/powerpc/include/asm/secvar.h
+++ b/arch/powerpc/include/asm/secvar.h
@@ -17,6 +17,7 @@ struct secvar_operations {
int (*get)(const char *key, u64 key_len, u8 *data, u64 *data_size);
int (*get_next)(const char *key, u64 *key_len, u64 keybufsize);
int (*set)(const char *key, u64 key_len, u8 *data, u64 data_size);
+ ssize_t (*format)(char *buf, size_t bufsize);
};
#ifdef CONFIG_PPC_SECURE_BOOT
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
index b786d1005027..e4661559c855 100644
--- a/arch/powerpc/kernel/secvar-sysfs.c
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -21,26 +21,17 @@ static struct kset *secvar_kset;
static ssize_t format_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
{
- ssize_t rc = 0;
- struct device_node *node;
- const char *format;
-
- node = of_find_compatible_node(NULL, NULL, "ibm,secvar-backend");
- if (!of_device_is_available(node)) {
- rc = -ENODEV;
- goto out;
- }
+ char tmp[32];
+ ssize_t len = secvar_ops->format(tmp, sizeof(tmp));
- rc = of_property_read_string(node, "format", &format);
- if (rc)
- goto out;
+ if (len > 0)
+ return sysfs_emit(buf, "%s\n", tmp);
+ else if (len < 0)
+ pr_err("Error %zd reading format string\n", len);
+ else
+ pr_err("Got empty format string from backend\n");
- rc = sysfs_emit(buf, "%s\n", format);
-
-out:
- of_node_put(node);
-
- return rc;
+ return -EIO;
}
diff --git a/arch/powerpc/platforms/powernv/opal-secvar.c b/arch/powerpc/platforms/powernv/opal-secvar.c
index 4c0a3b030fe0..e33bb703ecbc 100644
--- a/arch/powerpc/platforms/powernv/opal-secvar.c
+++ b/arch/powerpc/platforms/powernv/opal-secvar.c
@@ -98,10 +98,35 @@ static int opal_set_variable(const char *key, u64 ksize, u8 *data, u64 dsize)
return opal_status_to_err(rc);
}
+static ssize_t opal_secvar_format(char *buf, size_t bufsize)
+{
+ ssize_t rc = 0;
+ struct device_node *node;
+ const char *format;
+
+ node = of_find_compatible_node(NULL, NULL, "ibm,secvar-backend");
+ if (!of_device_is_available(node)) {
+ rc = -ENODEV;
+ goto out;
+ }
+
+ rc = of_property_read_string(node, "format", &format);
+ if (rc)
+ goto out;
+
+ rc = snprintf(buf, bufsize, "%s", format);
+
+out:
+ of_node_put(node);
+
+ return rc;
+}
+
static const struct secvar_operations opal_secvar_ops = {
.get = opal_get_variable,
.get_next = opal_get_next_variable,
.set = opal_set_variable,
+ .format = opal_secvar_format,
};
static int opal_secvar_probe(struct platform_device *pdev)
--
2.39.1
Currently, plpks_read_var() allocates a buffer to pass to the
H_PKS_READ_OBJECT hcall, then allocates another buffer, of the caller's
preferred size if necessary, into which the data is copied, and returns
that buffer to the caller.
This is a bit over the top - while we probably still want to allocate a
separate buffer to pass to the hypervisor in the hcall, we can let the
caller allocate the final buffer and specify the size.
Don't allocate var->data in plpks_read_var(), instead expect the caller to
allocate it. If the caller needs to discover the size, it can set
var->data to NULL and var->datalen will be populated. Update header file
to document this.
Suggested-by: Michael Ellerman <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v3: New patch (mpe)
---
arch/powerpc/include/asm/plpks.h | 12 ++++++++++++
arch/powerpc/platforms/pseries/plpks.c | 11 ++++-------
2 files changed, 16 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h
index e7204e6c0ca4..0c49969b0864 100644
--- a/arch/powerpc/include/asm/plpks.h
+++ b/arch/powerpc/include/asm/plpks.h
@@ -88,16 +88,28 @@ int plpks_remove_var(char *component, u8 varos,
/**
* Returns the data for the specified os variable.
+ *
+ * Caller must allocate a buffer in var->data with length in var->datalen.
+ * If no buffer is provided, var->datalen will be populated with the object's
+ * size.
*/
int plpks_read_os_var(struct plpks_var *var);
/**
* Returns the data for the specified firmware variable.
+ *
+ * Caller must allocate a buffer in var->data with length in var->datalen.
+ * If no buffer is provided, var->datalen will be populated with the object's
+ * size.
*/
int plpks_read_fw_var(struct plpks_var *var);
/**
* Returns the data for the specified bootloader variable.
+ *
+ * Caller must allocate a buffer in var->data with length in var->datalen.
+ * If no buffer is provided, var->datalen will be populated with the object's
+ * size.
*/
int plpks_read_bootloader_var(struct plpks_var *var);
diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
index e5755443d4a4..926b6a927326 100644
--- a/arch/powerpc/platforms/pseries/plpks.c
+++ b/arch/powerpc/platforms/pseries/plpks.c
@@ -581,17 +581,14 @@ static int plpks_read_var(u8 consumer, struct plpks_var *var)
goto out_free_output;
}
- if (var->datalen == 0 || var->datalen > retbuf[0])
+ if (!var->data || var->datalen > retbuf[0])
var->datalen = retbuf[0];
- var->data = kzalloc(var->datalen, GFP_KERNEL);
- if (!var->data) {
- rc = -ENOMEM;
- goto out_free_output;
- }
var->policy = retbuf[1];
- memcpy(var->data, output, var->datalen);
+ if (var->data)
+ memcpy(var->data, output, var->datalen);
+
rc = 0;
out_free_output:
--
2.39.1
From: Russell Currey <[email protected]>
Currently the max object size is handled in the core secvar code with an
entirely OPAL-specific implementation, so create a new max_size() op and
move the existing implementation into the powernv platform. Should be
no functional change.
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v3: Change uint64_t type to u64 (mpe)
v4: Return immediately if node is NULL (gjoyce)
---
arch/powerpc/include/asm/secvar.h | 1 +
arch/powerpc/kernel/secvar-sysfs.c | 17 +++------------
arch/powerpc/platforms/powernv/opal-secvar.c | 22 ++++++++++++++++++++
3 files changed, 26 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h
index 1a2c696a48ad..bf396215903d 100644
--- a/arch/powerpc/include/asm/secvar.h
+++ b/arch/powerpc/include/asm/secvar.h
@@ -18,6 +18,7 @@ struct secvar_operations {
int (*get_next)(const char *key, u64 *key_len, u64 keybufsize);
int (*set)(const char *key, u64 key_len, u8 *data, u64 data_size);
ssize_t (*format)(char *buf, size_t bufsize);
+ int (*max_size)(u64 *max_size);
};
#ifdef CONFIG_PPC_SECURE_BOOT
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
index e4661559c855..0966806f28c7 100644
--- a/arch/powerpc/kernel/secvar-sysfs.c
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -132,27 +132,16 @@ static struct kobj_type secvar_ktype = {
static int update_kobj_size(void)
{
- struct device_node *node;
u64 varsize;
- int rc = 0;
+ int rc = secvar_ops->max_size(&varsize);
- node = of_find_compatible_node(NULL, NULL, "ibm,secvar-backend");
- if (!of_device_is_available(node)) {
- rc = -ENODEV;
- goto out;
- }
-
- rc = of_property_read_u64(node, "max-var-size", &varsize);
if (rc)
- goto out;
+ return rc;
data_attr.size = varsize;
update_attr.size = varsize;
-out:
- of_node_put(node);
-
- return rc;
+ return 0;
}
static int secvar_sysfs_load(void)
diff --git a/arch/powerpc/platforms/powernv/opal-secvar.c b/arch/powerpc/platforms/powernv/opal-secvar.c
index e33bb703ecbc..a8436bf35e2f 100644
--- a/arch/powerpc/platforms/powernv/opal-secvar.c
+++ b/arch/powerpc/platforms/powernv/opal-secvar.c
@@ -122,11 +122,33 @@ static ssize_t opal_secvar_format(char *buf, size_t bufsize)
return rc;
}
+static int opal_secvar_max_size(u64 *max_size)
+{
+ int rc;
+ struct device_node *node;
+
+ node = of_find_compatible_node(NULL, NULL, "ibm,secvar-backend");
+ if (!node)
+ return -ENODEV;
+
+ if (!of_device_is_available(node)) {
+ rc = -ENODEV;
+ goto out;
+ }
+
+ rc = of_property_read_u64(node, "max-var-size", max_size);
+
+out:
+ of_node_put(node);
+ return rc;
+}
+
static const struct secvar_operations opal_secvar_ops = {
.get = opal_get_variable,
.get_next = opal_get_next_variable,
.set = opal_set_variable,
.format = opal_secvar_format,
+ .max_size = opal_secvar_max_size,
};
static int opal_secvar_probe(struct platform_device *pdev)
--
2.39.1
Due to sysfs constraints, when writing to a variable, we can only handle
writes of up to PAGE_SIZE.
It's possible that the maximum object size is larger than PAGE_SIZE, in
which case, print a warning on boot so that the user is aware.
Signed-off-by: Andrew Donnellan <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
---
v3: New patch (ajd)
---
arch/powerpc/kernel/secvar-sysfs.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
index 2cbc60b37e4e..9b6be63b7b36 100644
--- a/arch/powerpc/kernel/secvar-sysfs.c
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -223,6 +223,7 @@ static int secvar_sysfs_load_static(void)
static int secvar_sysfs_init(void)
{
+ u64 max_size;
int rc;
if (!secvar_ops) {
@@ -272,6 +273,14 @@ static int secvar_sysfs_init(void)
goto err;
}
+ // Due to sysfs limitations, we will only ever get a write buffer of
+ // up to 1 page in size. Print a warning if this is potentially going
+ // to cause problems, so that the user is aware.
+ secvar_ops->max_size(&max_size);
+ if (max_size > PAGE_SIZE)
+ pr_warn_ratelimited("PAGE_SIZE (%lu) is smaller than maximum object size (%llu), writes are limited to PAGE_SIZE\n",
+ PAGE_SIZE, max_size);
+
return 0;
err:
kobject_put(secvar_kobj);
--
2.39.1
From: Russell Currey <[email protected]>
The secvar code only supports one consumer at a time.
Multiple consumers aren't possible at this point in time, but we'd want
it to be obvious if it ever could happen.
Signed-off-by: Russell Currey <[email protected]>
Co-developed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
---
v4: Return an error and don't actually try to set secvar_operations if the
warning is triggered (npiggin)
v5: Drop "extern" to fix a checkpatch check (snowpatch)
---
arch/powerpc/include/asm/secvar.h | 4 ++--
arch/powerpc/kernel/secvar-ops.c | 8 ++++++--
arch/powerpc/platforms/powernv/opal-secvar.c | 4 +---
3 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h
index 07ba36f868a7..a2b5f2203dc5 100644
--- a/arch/powerpc/include/asm/secvar.h
+++ b/arch/powerpc/include/asm/secvar.h
@@ -21,11 +21,11 @@ struct secvar_operations {
#ifdef CONFIG_PPC_SECURE_BOOT
-extern void set_secvar_ops(const struct secvar_operations *ops);
+int set_secvar_ops(const struct secvar_operations *ops);
#else
-static inline void set_secvar_ops(const struct secvar_operations *ops) { }
+static inline int set_secvar_ops(const struct secvar_operations *ops) { return 0; }
#endif
diff --git a/arch/powerpc/kernel/secvar-ops.c b/arch/powerpc/kernel/secvar-ops.c
index 6a29777d6a2d..9c8dd4e7c270 100644
--- a/arch/powerpc/kernel/secvar-ops.c
+++ b/arch/powerpc/kernel/secvar-ops.c
@@ -8,10 +8,14 @@
#include <linux/cache.h>
#include <asm/secvar.h>
+#include <asm/bug.h>
-const struct secvar_operations *secvar_ops __ro_after_init;
+const struct secvar_operations *secvar_ops __ro_after_init = NULL;
-void set_secvar_ops(const struct secvar_operations *ops)
+int set_secvar_ops(const struct secvar_operations *ops)
{
+ if (WARN_ON_ONCE(secvar_ops))
+ return -1;
secvar_ops = ops;
+ return 0;
}
diff --git a/arch/powerpc/platforms/powernv/opal-secvar.c b/arch/powerpc/platforms/powernv/opal-secvar.c
index ef89861569e0..4c0a3b030fe0 100644
--- a/arch/powerpc/platforms/powernv/opal-secvar.c
+++ b/arch/powerpc/platforms/powernv/opal-secvar.c
@@ -113,9 +113,7 @@ static int opal_secvar_probe(struct platform_device *pdev)
return -ENODEV;
}
- set_secvar_ops(&opal_secvar_ops);
-
- return 0;
+ return set_secvar_ops(&opal_secvar_ops);
}
static const struct of_device_id opal_secvar_match[] = {
--
2.39.1
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> The secvar code only supports one consumer at a time.
>
> Multiple consumers aren't possible at this point in time, but we'd want
> it to be obvious if it ever could happen.
>
> Signed-off-by: Russell Currey <[email protected]>
> Co-developed-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
>
> ---
>
> v4: Return an error and don't actually try to set secvar_operations if the
> warning is triggered (npiggin)
>
> v5: Drop "extern" to fix a checkpatch check (snowpatch)
> ---
> arch/powerpc/include/asm/secvar.h | 4 ++--
> arch/powerpc/kernel/secvar-ops.c | 8 ++++++--
> arch/powerpc/platforms/powernv/opal-secvar.c | 4 +---
> 3 files changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h
> index 07ba36f868a7..a2b5f2203dc5 100644
> --- a/arch/powerpc/include/asm/secvar.h
> +++ b/arch/powerpc/include/asm/secvar.h
> @@ -21,11 +21,11 @@ struct secvar_operations {
>
> #ifdef CONFIG_PPC_SECURE_BOOT
>
> -extern void set_secvar_ops(const struct secvar_operations *ops);
> +int set_secvar_ops(const struct secvar_operations *ops);
>
> #else
>
> -static inline void set_secvar_ops(const struct secvar_operations *ops) { }
> +static inline int set_secvar_ops(const struct secvar_operations *ops) { return 0; }
>
> #endif
>
> diff --git a/arch/powerpc/kernel/secvar-ops.c b/arch/powerpc/kernel/secvar-ops.c
> index 6a29777d6a2d..9c8dd4e7c270 100644
> --- a/arch/powerpc/kernel/secvar-ops.c
> +++ b/arch/powerpc/kernel/secvar-ops.c
> @@ -8,10 +8,14 @@
>
> #include <linux/cache.h>
> #include <asm/secvar.h>
> +#include <asm/bug.h>
>
> -const struct secvar_operations *secvar_ops __ro_after_init;
> +const struct secvar_operations *secvar_ops __ro_after_init = NULL;
>
> -void set_secvar_ops(const struct secvar_operations *ops)
> +int set_secvar_ops(const struct secvar_operations *ops)
> {
> + if (WARN_ON_ONCE(secvar_ops))
> + return -1;
The calling function opal_secvar_probe() returns an errno (-ENODEV for example). Return also an errno here?
> secvar_ops = ops;
> + return 0;
> }
> diff --git a/arch/powerpc/platforms/powernv/opal-secvar.c b/arch/powerpc/platforms/powernv/opal-secvar.c
> index ef89861569e0..4c0a3b030fe0 100644
> --- a/arch/powerpc/platforms/powernv/opal-secvar.c
> +++ b/arch/powerpc/platforms/powernv/opal-secvar.c
> @@ -113,9 +113,7 @@ static int opal_secvar_probe(struct platform_device *pdev)
> return -ENODEV;
This is the errno.
> }
>
> - set_secvar_ops(&opal_secvar_ops);
> -
> - return 0;
> + return set_secvar_ops(&opal_secvar_ops);
Stefan
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> The secvar format string and object size sysfs files are both ASCII
> text, and should use sysfs_emit(). No functional change.
>
> Suggested-by: Greg Kroah-Hartman <[email protected]>
> Signed-off-by: Russell Currey <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
>
> ---
>
> v2: New patch (gregkh)
> ---
> arch/powerpc/kernel/secvar-sysfs.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
> index 702044edf14d..b786d1005027 100644
> --- a/arch/powerpc/kernel/secvar-sysfs.c
> +++ b/arch/powerpc/kernel/secvar-sysfs.c
> @@ -35,7 +35,7 @@ static ssize_t format_show(struct kobject *kobj, struct kobj_attribute *attr,
> if (rc)
> goto out;
>
> - rc = sprintf(buf, "%s\n", format);
> + rc = sysfs_emit(buf, "%s\n", format);
>
> out:
> of_node_put(node);
> @@ -57,7 +57,7 @@ static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
> return rc;
> }
>
> - return sprintf(buf, "%llu\n", dsize);
> + return sysfs_emit(buf, "%llu\n", dsize);
> }
>
> static ssize_t data_read(struct file *filep, struct kobject *kobj,
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> The code that handles the format string in secvar-sysfs.c is entirely
> OPAL specific, so create a new "format" op in secvar_operations to make
> the secvar code more generic. No functional change.
>
> Signed-off-by: Russell Currey <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> Currently the max object size is handled in the core secvar code with an
> entirely OPAL-specific implementation, so create a new max_size() op and
> move the existing implementation into the powernv platform. Should be
> no functional change.
>
> Signed-off-by: Russell Currey <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> Remove unnecessary prefixes from error messages in secvar_sysfs_init()
> (the file defines pr_fmt, so putting "secvar:" in every message is
> unnecessary). Make capitalisation and punctuation more consistent.
>
> Signed-off-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Russell Currey <[email protected]>
>
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> The forthcoming pseries consumer of the secvar API wants to expose a
> number of config variables. Allowing secvar implementations to provide
> their own sysfs attributes makes it easy for consumers to expose what
> they need to.
>
> This is not being used by the OPAL secvar implementation at present, and
> the config directory will not be created if no attributes are set.
>
> Signed-off-by: Russell Currey <[email protected]>
> Co-developed-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
>
> ---
>
> v3: Remove unnecessary "secvar:" prefix from error messages (ajd)
>
> Merge config attributes into secvar_operations (mpe)
> ---
> arch/powerpc/include/asm/secvar.h | 2 ++
> arch/powerpc/kernel/secvar-sysfs.c | 33 +++++++++++++++++++++++++-----
> 2 files changed, 30 insertions(+), 5 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h
> index bf396215903d..011a53a8076c 100644
> --- a/arch/powerpc/include/asm/secvar.h
> +++ b/arch/powerpc/include/asm/secvar.h
> @@ -10,6 +10,7 @@
>
> #include <linux/types.h>
> #include <linux/errno.h>
> +#include <linux/sysfs.h>
>
> extern const struct secvar_operations *secvar_ops;
>
> @@ -19,6 +20,7 @@ struct secvar_operations {
> int (*set)(const char *key, u64 key_len, u8 *data, u64 data_size);
> ssize_t (*format)(char *buf, size_t bufsize);
> int (*max_size)(u64 *max_size);
> + const struct attribute **config_attrs;
> };
>
> #ifdef CONFIG_PPC_SECURE_BOOT
> diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
> index 8f3deff94009..7df32be86507 100644
> --- a/arch/powerpc/kernel/secvar-sysfs.c
> +++ b/arch/powerpc/kernel/secvar-sysfs.c
> @@ -144,6 +144,19 @@ static int update_kobj_size(void)
> return 0;
> }
>
> +static int secvar_sysfs_config(struct kobject *kobj)
> +{
> + struct attribute_group config_group = {
> + .name = "config",
> + .attrs = (struct attribute **)secvar_ops->config_attrs,
> + };
> +
> + if (secvar_ops->config_attrs)
> + return sysfs_create_group(kobj, &config_group);
> +
> + return 0;
> +}
> +
> static int secvar_sysfs_load(void)
> {
> struct kobject *kobj;
> @@ -208,26 +221,36 @@ static int secvar_sysfs_init(void)
>
> rc = sysfs_create_file(secvar_kobj, &format_attr.attr);
> if (rc) {
> - kobject_put(secvar_kobj);
> - return -ENOMEM;
> + pr_err("Failed to create format object\n");
> + rc = -ENOMEM;
> + goto err;
> }
>
> secvar_kset = kset_create_and_add("vars", NULL, secvar_kobj);
> if (!secvar_kset) {
> pr_err("sysfs kobject registration failed\n");
> - kobject_put(secvar_kobj);
> - return -ENOMEM;
> + rc = -ENOMEM;
> + goto err;
> }
>
> rc = update_kobj_size();
> if (rc) {
> pr_err("Cannot read the size of the attribute\n");
> - return rc;
> + goto err;
> + }
> +
> + rc = secvar_sysfs_config(secvar_kobj);
> + if (rc) {
> + pr_err("Failed to create config directory\n");
> + goto err;
> }
>
> secvar_sysfs_load();
>
> return 0;
> +err:
> + kobject_put(secvar_kobj);
> + return rc;
> }
>
> late_initcall(secvar_sysfs_init);
On 1/31/23 01:39, Andrew Donnellan wrote:
> Currently, the list of variables is populated by calling
> secvar_ops->get_next() repeatedly, which is explicitly modelled on the
> OPAL API (including the keylen parameter).
>
> For the upcoming PLPKS backend, we have a static list of variable names.
> It is messy to fit that into get_next(), so instead, let the backend put
> a NULL-terminated array of variable names into secvar_ops->var_names,
> which will be used if get_next() is undefined.
>
> Signed-off-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Russell Currey <[email protected]>
>
> ---
>
> v3: New patch (ajd/mpe)
> ---
> arch/powerpc/include/asm/secvar.h | 4 ++
> arch/powerpc/kernel/secvar-sysfs.c | 67 ++++++++++++++++++++----------
> 2 files changed, 50 insertions(+), 21 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h
> index 011a53a8076c..4828e0ab7e3c 100644
> --- a/arch/powerpc/include/asm/secvar.h
> +++ b/arch/powerpc/include/asm/secvar.h
> @@ -21,6 +21,10 @@ struct secvar_operations {
> ssize_t (*format)(char *buf, size_t bufsize);
> int (*max_size)(u64 *max_size);
> const struct attribute **config_attrs;
> +
> + // NULL-terminated array of fixed variable names
> + // Only used if get_next() isn't provided
> + const char * const *var_names;
> };
>
> #ifdef CONFIG_PPC_SECURE_BOOT
> diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
> index 7df32be86507..2cbc60b37e4e 100644
> --- a/arch/powerpc/kernel/secvar-sysfs.c
> +++ b/arch/powerpc/kernel/secvar-sysfs.c
> @@ -157,9 +157,31 @@ static int secvar_sysfs_config(struct kobject *kobj)
> return 0;
> }
>
> -static int secvar_sysfs_load(void)
> +static int add_var(const char *name)
> {
> struct kobject *kobj;
> + int rc;
> +
> + kobj = kzalloc(sizeof(*kobj), GFP_KERNEL);
> + if (!kobj)
> + return -ENOMEM;
> +
> + kobject_init(kobj, &secvar_ktype);
> +
> + rc = kobject_add(kobj, &secvar_kset->kobj, "%s", name);
> + if (rc) {
> + pr_warn("kobject_add error %d for attribute: %s\n", rc,
> + name);
> + kobject_put(kobj);
> + return rc;
> + }
> +
> + kobject_uevent(kobj, KOBJ_ADD);
> + return 0;
> +}
> +
> +static int secvar_sysfs_load(void)
> +{
> u64 namesize = 0;
> char *name;
> int rc;
> @@ -179,31 +201,26 @@ static int secvar_sysfs_load(void)
> break;
> }
>
> - kobj = kzalloc(sizeof(*kobj), GFP_KERNEL);
> - if (!kobj) {
> - rc = -ENOMEM;
> - break;
> - }
> -
> - kobject_init(kobj, &secvar_ktype);
> -
> - rc = kobject_add(kobj, &secvar_kset->kobj, "%s", name);
> - if (rc) {
> - pr_warn("kobject_add error %d for attribute: %s\n", rc,
> - name);
> - kobject_put(kobj);
> - kobj = NULL;
> - }
> -
> - if (kobj)
> - kobject_uevent(kobj, KOBJ_ADD);
> -
> + rc = add_var(name);
> } while (!rc);
>
> kfree(name);
> return rc;
> }
>
> +static int secvar_sysfs_load_static(void)
> +{
> + const char * const *name_ptr = secvar_ops->var_names;
> + int rc;
Missing newline ?
> + while (*name_ptr) {
> + rc = add_var(*name_ptr);
> + if (rc)
> + return rc;
> + name_ptr++;
> + }
> + return 0;
> +}
> +
> static int secvar_sysfs_init(void)
> {
> int rc;
> @@ -245,7 +262,15 @@ static int secvar_sysfs_init(void)
> goto err;
> }
>
> - secvar_sysfs_load();
> + if (secvar_ops->get_next)
> + rc = secvar_sysfs_load();
> + else
> + rc = secvar_sysfs_load_static();
> +
> + if (rc) {
> + pr_err("Failed to create variable attributes\n");
> + goto err;
> + }
>
> return 0;
> err:
With the above change:
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> Due to sysfs constraints, when writing to a variable, we can only handle
> writes of up to PAGE_SIZE.
>
> It's possible that the maximum object size is larger than PAGE_SIZE, in
> which case, print a warning on boot so that the user is aware.
>
> Signed-off-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Russell Currey <[email protected]>
>
> ---
>
> v3: New patch (ajd)
> ---
> arch/powerpc/kernel/secvar-sysfs.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
> index 2cbc60b37e4e..9b6be63b7b36 100644
> --- a/arch/powerpc/kernel/secvar-sysfs.c
> +++ b/arch/powerpc/kernel/secvar-sysfs.c
> @@ -223,6 +223,7 @@ static int secvar_sysfs_load_static(void)
>
> static int secvar_sysfs_init(void)
> {
> + u64 max_size;
> int rc;
>
> if (!secvar_ops) {
> @@ -272,6 +273,14 @@ static int secvar_sysfs_init(void)
> goto err;
> }
>
> + // Due to sysfs limitations, we will only ever get a write buffer of
> + // up to 1 page in size. Print a warning if this is potentially going
> + // to cause problems, so that the user is aware.
> + secvar_ops->max_size(&max_size);
> + if (max_size > PAGE_SIZE)
> + pr_warn_ratelimited("PAGE_SIZE (%lu) is smaller than maximum object size (%llu), writes are limited to PAGE_SIZE\n",
> + PAGE_SIZE, max_size);
> +
> return 0;
> err:
> kobject_put(secvar_kobj);
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> If attempting to read the size or data attributes of a non-existent
> variable (which will be possible after a later patch to expose the PLPKS
> via the secvar interface), don't spam the kernel log with error messages.
> Only print errors for return codes that aren't ENOENT.
>
> Reported-by: Sudhakar Kuppusamy <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
>
> ---
>
> v3: New patch
> ---
> arch/powerpc/kernel/secvar-sysfs.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
> index 9b6be63b7b36..ca3df3f7156c 100644
> --- a/arch/powerpc/kernel/secvar-sysfs.c
> +++ b/arch/powerpc/kernel/secvar-sysfs.c
> @@ -43,8 +43,8 @@ static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
>
> rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
> if (rc) {
> - pr_err("Error retrieving %s variable size %d\n", kobj->name,
> - rc);
> + if (rc != -ENOENT)
> + pr_err("Error retrieving %s variable size %d\n", kobj->name, rc);
> return rc;
> }
>
> @@ -61,7 +61,8 @@ static ssize_t data_read(struct file *filep, struct kobject *kobj,
>
> rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
> if (rc) {
> - pr_err("Error getting %s variable size %d\n", kobj->name, rc);
> + if (rc != -ENOENT)
> + pr_err("Error getting %s variable size %d\n", kobj->name, rc);
> return rc;
> }
> pr_debug("dsize is %llu\n", dsize);
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> Move plpks.h from platforms/pseries/ to include/asm/. This is necessary
> for later patches to make use of the PLPKS from code in other subsystems.
>
> Signed-off-by: Russell Currey <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
>
> ---
>
> v3: New patch
> ---
> .../powerpc/{platforms/pseries => include/asm}/plpks.h | 10 +++++++---
> arch/powerpc/platforms/pseries/plpks.c | 3 +--
> 2 files changed, 8 insertions(+), 5 deletions(-)
> rename arch/powerpc/{platforms/pseries => include/asm}/plpks.h (89%)
>
> diff --git a/arch/powerpc/platforms/pseries/plpks.h b/arch/powerpc/include/asm/plpks.h
> similarity index 89%
> rename from arch/powerpc/platforms/pseries/plpks.h
> rename to arch/powerpc/include/asm/plpks.h
> index 275ccd86bfb5..8295502ee93b 100644
> --- a/arch/powerpc/platforms/pseries/plpks.h
> +++ b/arch/powerpc/include/asm/plpks.h
> @@ -6,8 +6,10 @@
> * Platform keystore for pseries LPAR(PLPKS).
> */
>
> -#ifndef _PSERIES_PLPKS_H
> -#define _PSERIES_PLPKS_H
> +#ifndef _ASM_POWERPC_PLPKS_H
> +#define _ASM_POWERPC_PLPKS_H
> +
> +#ifdef CONFIG_PSERIES_PLPKS
>
> #include <linux/types.h>
> #include <linux/list.h>
> @@ -68,4 +70,6 @@ int plpks_read_fw_var(struct plpks_var *var);
> */
> int plpks_read_bootloader_var(struct plpks_var *var);
>
> -#endif
> +#endif // CONFIG_PSERIES_PLPKS
> +
> +#endif // _ASM_POWERPC_PLPKS_H
> diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
> index a01cf2ff140a..13e6daadb179 100644
> --- a/arch/powerpc/platforms/pseries/plpks.c
> +++ b/arch/powerpc/platforms/pseries/plpks.c
> @@ -18,8 +18,7 @@
> #include <linux/types.h>
> #include <asm/hvcall.h>
> #include <asm/machdep.h>
> -
> -#include "plpks.h"
> +#include <asm/plpks.h>
>
> #define PKS_FW_OWNER 0x1
> #define PKS_BOOTLOADER_OWNER 0x2
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> Move the constants defined in plpks.c to plpks.h, and standardise their
> naming, so that PLPKS consumers can make use of them later on.
>
> Signed-off-by: Russell Currey <[email protected]>
> Co-developed-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Nayna Jain <[email protected]>
>
> The plpks driver uses the H_PKS_GET_CONFIG hcall to retrieve configuration
> and status information about the PKS from the hypervisor.
>
> Update _plpks_get_config() to handle some additional fields. Add getter
> functions to allow the PKS configuration information to be accessed from
> other files. Validate that the values we're getting comply with the spec.
>
> While we're here, move the config struct in _plpks_get_config() off the
> stack - it's getting large and we also need to make sure it doesn't cross
> a page boundary.
>
> Signed-off-by: Nayna Jain <[email protected]>
> [ajd: split patch, extend to support additional v3 API fields, minor fixes]
> Co-developed-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Russell Currey <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Nayna Jain <[email protected]>
>
> The Platform Keystore provides a signed update interface which can be used
> to create, replace or append to certain variables in the PKS in a secure
> fashion, with the hypervisor requiring that the update be signed using the
> Platform Key.
>
> Implement an interface to the H_PKS_SIGNED_UPDATE hcall in the plpks
> driver to allow signed updates to PKS objects.
>
> (The plpks driver doesn't need to do any cryptography or otherwise handle
> the actual signed variable contents - that will be handled by userspace
> tooling.)
>
> Signed-off-by: Nayna Jain <[email protected]>
> [ajd: split patch, add timeout handling and misc cleanups]
> Co-developed-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Russell Currey <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> The plpks code converts hypervisor return codes into their Linux
> equivalents so that users can understand them. Having access to the
> original return codes is really useful for debugging, so add a
> pr_debug() so we don't lose information from the conversion.
>
> Signed-off-by: Russell Currey <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
> ---
> arch/powerpc/platforms/pseries/plpks.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
> index cee06fb9a370..e5755443d4a4 100644
> --- a/arch/powerpc/platforms/pseries/plpks.c
> +++ b/arch/powerpc/platforms/pseries/plpks.c
> @@ -117,6 +117,8 @@ static int pseries_status_to_err(int rc)
> err = -EINVAL;
> }
>
> + pr_debug("Converted hypervisor code %d to Linux %d\n", rc, err);
> +
> return err;
> }
>
On 1/31/23 01:39, Andrew Donnellan wrote:
> Currently, plpks_read_var() allocates a buffer to pass to the
> H_PKS_READ_OBJECT hcall, then allocates another buffer, of the caller's
-> buffer of the (no comma)
> preferred size if necessary, into which the data is copied, and returns
> that buffer to the caller.
>
> This is a bit over the top - while we probably still want to allocate a
> separate buffer to pass to the hypervisor in the hcall, we can let the
> caller allocate the final buffer and specify the size.
>
> Don't allocate var->data in plpks_read_var(), instead expect the caller to
> allocate it. If the caller needs to discover the size, it can set
> var->data to NULL and var->datalen will be populated. Update header file
> to document this.
It looks like there are no callers yet that would need to be adapted...
Reviewed-by: Stefan Berger <[email protected]>
>
> Suggested-by: Michael Ellerman <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Russell Currey <[email protected]>
>
> ---
>
> v3: New patch (mpe)
> ---
> arch/powerpc/include/asm/plpks.h | 12 ++++++++++++
> arch/powerpc/platforms/pseries/plpks.c | 11 ++++-------
> 2 files changed, 16 insertions(+), 7 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h
> index e7204e6c0ca4..0c49969b0864 100644
> --- a/arch/powerpc/include/asm/plpks.h
> +++ b/arch/powerpc/include/asm/plpks.h
> @@ -88,16 +88,28 @@ int plpks_remove_var(char *component, u8 varos,
>
> /**
> * Returns the data for the specified os variable.
> + *
> + * Caller must allocate a buffer in var->data with length in var->datalen.
> + * If no buffer is provided, var->datalen will be populated with the object's
> + * size.
> */
> int plpks_read_os_var(struct plpks_var *var);
>
> /**
> * Returns the data for the specified firmware variable.
> + *
> + * Caller must allocate a buffer in var->data with length in var->datalen.
> + * If no buffer is provided, var->datalen will be populated with the object's
> + * size.
> */
> int plpks_read_fw_var(struct plpks_var *var);
>
> /**
> * Returns the data for the specified bootloader variable.
> + *
> + * Caller must allocate a buffer in var->data with length in var->datalen.
> + * If no buffer is provided, var->datalen will be populated with the object's
> + * size.
> */
> int plpks_read_bootloader_var(struct plpks_var *var);
>
> diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
> index e5755443d4a4..926b6a927326 100644
> --- a/arch/powerpc/platforms/pseries/plpks.c
> +++ b/arch/powerpc/platforms/pseries/plpks.c
> @@ -581,17 +581,14 @@ static int plpks_read_var(u8 consumer, struct plpks_var *var)
> goto out_free_output;
> }
>
> - if (var->datalen == 0 || var->datalen > retbuf[0])
> + if (!var->data || var->datalen > retbuf[0])
> var->datalen = retbuf[0];
>
> - var->data = kzalloc(var->datalen, GFP_KERNEL);
> - if (!var->data) {
> - rc = -ENOMEM;
> - goto out_free_output;
> - }
> var->policy = retbuf[1];
>
> - memcpy(var->data, output, var->datalen);
> + if (var->data)
> + memcpy(var->data, output, var->datalen);
> +
> rc = 0;
>
> out_free_output:
On 1/31/23 01:39, Andrew Donnellan wrote:
> It seems a bit unnecessary for the PLPKS code to have a user-visible
> config option when it doesn't do anything on its own, and there's existing
> options for enabling Secure Boot-related features.
>
> It should be enabled by PPC_SECURE_BOOT, which will eventually be what
> uses PLPKS to populate keyrings.
>
> However, we can't get of the separate option completely, because it will
> also be used for SED Opal purposes.
>
> Change PSERIES_PLPKS into a hidden option, which is selected by
> PPC_SECURE_BOOT.
>
> Signed-off-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Russell Currey <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
>
> ---
>
> v3: New patch
>
> v5: Change the previous description into a comment (npiggin)
> ---
> arch/powerpc/Kconfig | 1 +
> arch/powerpc/platforms/pseries/Kconfig | 19 +++++++++----------
> 2 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index b8c4ac56bddc..d4ed46101bec 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -1029,6 +1029,7 @@ config PPC_SECURE_BOOT
> depends on PPC_POWERNV || PPC_PSERIES
> depends on IMA_ARCH_POLICY
> imply IMA_SECURE_AND_OR_TRUSTED_BOOT
> + select PSERIES_PLPKS if PPC_PSERIES
> help
> Systems with firmware secure boot enabled need to define security
> policies to extend secure boot to the OS. This config allows a user
> diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
> index a3b4d99567cb..e51d65969318 100644
> --- a/arch/powerpc/platforms/pseries/Kconfig
> +++ b/arch/powerpc/platforms/pseries/Kconfig
> @@ -151,16 +151,15 @@ config IBMEBUS
>
> config PSERIES_PLPKS
> depends on PPC_PSERIES
> - bool "Support for the Platform Key Storage"
> - help
> - PowerVM provides an isolated Platform Keystore(PKS) storage
> - allocation for each LPAR with individually managed access
> - controls to store sensitive information securely. It can be
> - used to store asymmetric public keys or secrets as required
> - by different usecases. Select this config to enable
> - operating system interface to hypervisor to access this space.
> -
> - If unsure, select N.
> + bool
> + # PowerVM provides an isolated Platform Keystore (PKS) storage
> + # allocation for each LPAR with individually managed access
> + # controls to store sensitive information securely. It can be
> + # used to store asymmetric public keys or secrets as required
> + # by different usecases.
> + #
> + # This option is selected by in-kernel consumers that require
> + # access to the PKS.
>
> config PAPR_SCM
> depends on PPC_PSERIES && MEMORY_HOTPLUG && LIBNVDIMM
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> Add helper function to get the PLPKS password length. This will be used
> in a later patch to support passing the password between kernels over
> kexec.
>
> Signed-off-by: Russell Currey <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
>
> ---
>
> v3: New patch
>
> v5: Drop plpks_get_password() since we no longer need to expose it.
> ---
> arch/powerpc/include/asm/plpks.h | 5 +++++
> arch/powerpc/platforms/pseries/plpks.c | 5 +++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h
> index 0c49969b0864..757313e00521 100644
> --- a/arch/powerpc/include/asm/plpks.h
> +++ b/arch/powerpc/include/asm/plpks.h
> @@ -171,6 +171,11 @@ u32 plpks_get_maxlargeobjectsize(void);
> */
> u64 plpks_get_signedupdatealgorithms(void);
>
> +/**
> + * Returns the length of the PLPKS password in bytes.
> + */
> +u16 plpks_get_passwordlen(void);
> +
> #endif // CONFIG_PSERIES_PLPKS
>
> #endif // _ASM_POWERPC_PLPKS_H
> diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
> index 926b6a927326..6940280ae94a 100644
> --- a/arch/powerpc/platforms/pseries/plpks.c
> +++ b/arch/powerpc/platforms/pseries/plpks.c
> @@ -359,6 +359,11 @@ u64 plpks_get_signedupdatealgorithms(void)
> return signedupdatealgorithms;
> }
>
> +u16 plpks_get_passwordlen(void)
> +{
> + return ospasswordlength;
> +}
> +
> bool plpks_is_available(void)
> {
> int rc;
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> Before interacting with the PLPKS, we ask the hypervisor to generate a
> password for the current boot, which is then required for most further
> PLPKS operations.
>
> If we kexec into a new kernel, the new kernel will try and fail to
> generate a new password, as the password has already been set.
>
> Pass the password through to the new kernel via the device tree, in
> /chosen/ibm,plpks-pw. Check for the presence of this property before
> trying to generate a new password - if it exists, use the existing
> password and remove it from the device tree.
>
> Signed-off-by: Russell Currey <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
>
> ---
>
> v3: New patch
>
> v4: Fix compile when CONFIG_PSERIES_PLPKS=n (snowpatch)
>
> Fix error handling on fdt_path_offset() call (ruscur)
>
> v5: Fix DT property name in commit message (npiggin)
>
> Clear prop in FDT during init to prevent password exposure (mpe)
>
> Rework to remove ifdefs from C code (npiggin)
> ---
> arch/powerpc/include/asm/plpks.h | 14 ++++++
> arch/powerpc/kernel/prom.c | 4 ++
> arch/powerpc/kexec/file_load_64.c | 15 +++++--
> arch/powerpc/platforms/pseries/plpks.c | 60 ++++++++++++++++++++++++++
> 4 files changed, 90 insertions(+), 3 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h
> index 757313e00521..23b77027c916 100644
> --- a/arch/powerpc/include/asm/plpks.h
> +++ b/arch/powerpc/include/asm/plpks.h
> @@ -176,6 +176,20 @@ u64 plpks_get_signedupdatealgorithms(void);
> */
> u16 plpks_get_passwordlen(void);
>
> +/**
> + * Called in early init to retrieve and clear the PLPKS password from the DT.
> + */
> +void plpks_early_init_devtree(void);
> +
> +/**
> + * Populates the FDT with the PLPKS password to prepare for kexec.
> + */
> +int plpks_populate_fdt(void *fdt);
> +#else // CONFIG_PSERIES_PLPKS
> +static inline bool plpks_is_available(void) { return false; }
> +static inline u16 plpks_get_passwordlen(void) { BUILD_BUG(); }
> +static inline void plpks_early_init_devtree(void) { }
> +static inline int plpks_populate_fdt(void *fdt) { BUILD_BUG(); }
> #endif // CONFIG_PSERIES_PLPKS
>
> #endif // _ASM_POWERPC_PLPKS_H
> diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
> index 4f1c920aa13e..8a13b378770f 100644
> --- a/arch/powerpc/kernel/prom.c
> +++ b/arch/powerpc/kernel/prom.c
> @@ -56,6 +56,7 @@
> #include <asm/drmem.h>
> #include <asm/ultravisor.h>
> #include <asm/prom.h>
> +#include <asm/plpks.h>
>
> #include <mm/mmu_decl.h>
>
> @@ -893,6 +894,9 @@ void __init early_init_devtree(void *params)
> powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
> #endif
>
> + /* If kexec left a PLPKS password in the DT, get it and clear it */
> + plpks_early_init_devtree();
> +
> tm_init();
>
> DBG(" <- early_init_devtree()\n");
> diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
> index af8854f9eae3..3f5740fb01a4 100644
> --- a/arch/powerpc/kexec/file_load_64.c
> +++ b/arch/powerpc/kexec/file_load_64.c
> @@ -27,6 +27,7 @@
> #include <asm/kexec_ranges.h>
> #include <asm/crashdump-ppc64.h>
> #include <asm/prom.h>
> +#include <asm/plpks.h>
>
> struct umem_info {
> u64 *buf; /* data buffer for usable-memory property */
> @@ -977,12 +978,16 @@ static unsigned int cpu_node_size(void)
> */
> unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image)
> {
> - unsigned int cpu_nodes, extra_size;
> + unsigned int cpu_nodes, extra_size = 0;
> struct device_node *dn;
> u64 usm_entries;
>
> + // Make room for the PLPKS password, plus node overhead for ibm,plpks-pw.
> + if (plpks_is_available())
> + extra_size += (unsigned int)plpks_get_passwordlen() + 32;
Is there nothing better than a '32'?
> +
> if (image->type != KEXEC_TYPE_CRASH)
> - return 0;
> + return extra_size;
>
> /*
> * For kdump kernel, account for linux,usable-memory and
> @@ -992,7 +997,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image)
> usm_entries = ((memblock_end_of_DRAM() / drmem_lmb_size()) +
> (2 * (resource_size(&crashk_res) / drmem_lmb_size())));
>
> - extra_size = (unsigned int)(usm_entries * sizeof(u64));
> + extra_size += (unsigned int)(usm_entries * sizeof(u64));
>
> /*
> * Get the number of CPU nodes in the current DT. This allows to
> @@ -1230,6 +1235,10 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
> }
> }
>
> + // If we have PLPKS active, we need to provide the password to the new kernel
> + if (plpks_is_available())
> + ret = plpks_populate_fdt(fdt);
> +
> out:
> kfree(rmem);
> kfree(umem);
> diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c
> index 6940280ae94a..481a669845c5 100644
> --- a/arch/powerpc/platforms/pseries/plpks.c
> +++ b/arch/powerpc/platforms/pseries/plpks.c
> @@ -16,6 +16,9 @@
> #include <linux/slab.h>
> #include <linux/string.h>
> #include <linux/types.h>
> +#include <linux/of_fdt.h>
> +#include <linux/libfdt.h>
> +#include <linux/memblock.h>
> #include <asm/hvcall.h>
> #include <asm/machdep.h>
> #include <asm/plpks.h>
> @@ -128,6 +131,12 @@ static int plpks_gen_password(void)
> u8 *password, consumer = PLPKS_OS_OWNER;
> int rc;
>
> + // If we booted from kexec, we could be reusing an existing password already
> + if (ospassword) {
> + pr_debug("Password of length %u already in use\n", ospasswordlength);
> + return 0;
> + }
> +
> // The password must not cross a page boundary, so we align to the next power of 2
> password = kzalloc(roundup_pow_of_two(maxpwsize), GFP_KERNEL);
> if (!password)
> @@ -621,6 +630,57 @@ int plpks_read_bootloader_var(struct plpks_var *var)
> return plpks_read_var(PLPKS_BOOTLOADER_OWNER, var);
> }
>
> +int plpks_populate_fdt(void *fdt)
> +{
> + int chosen_offset = fdt_path_offset(fdt, "/chosen");
Newline here?
> + if (chosen_offset < 0) {
> + pr_err("Can't find chosen node: %s\n",
> + fdt_strerror(chosen_offset));
> + return chosen_offset;
> + }
> +
> + return fdt_setprop(fdt, chosen_offset, "ibm,plpks-pw", ospassword, ospasswordlength);
> +}
> +
> +// Once a password is registered with the hypervisor it cannot be cleared without
> +// rebooting the LPAR, so to keep using the PLPKS across kexec boots we need to
> +// recover the previous password from the FDT.
> +//
> +// There are a few challenges here. We don't want the password to be visible to
> +// users, so we need to clear it from the FDT. This has to be done in early boot.
> +// Clearing it from the FDT would make the FDT's checksum invalid, so we have to
> +// manually cause the checksum to be recalculated.
> +void __init plpks_early_init_devtree(void)
> +{
> + void *fdt = initial_boot_params;
> + int chosen_node = fdt_path_offset(fdt, "/chosen");
> + u8 *password;
const u8 *password ?
> + int len;
> +
> + if (chosen_node < 0)
> + return;
> +
> + password = (u8 *)fdt_getprop(fdt, chosen_node, "ibm,plpks-pw", &len);
> + if (len <= 0) {
> + pr_debug("Couldn't find ibm,plpks-pw node.\n");
> + return;
> + }
> +
> + ospassword = memblock_alloc_raw(len, SMP_CACHE_BYTES);
> + if (!ospassword) {
> + pr_err("Error allocating memory for password.\n");
Also display 'len' here?
> + goto out;
> + }
> +
> + memcpy(ospassword, password, len);
> + ospasswordlength = (u16)len;
> +
> +out:
> + fdt_nop_property(fdt, chosen_node, "ibm,plpks-pw");
> + // Since we've cleared the password, we must update the FDT checksum
> + early_init_dt_verify(fdt);
> +}
> +
> static __init int pseries_plpks_init(void)
> {
> int rc;
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> The pseries platform can support dynamic secure boot (i.e. secure boot
> using user-defined keys) using variables contained with the PowerVM LPAR
> Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the
> relevant variables for pseries dynamic secure boot through the existing
> secvar filesystem layout.
>
> The relevant variables for dynamic secure boot are signed in the
> keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
> Object labels in the keystore are encoded using ucs2 format. With our
> fixed variable names we don't have to care about encoding outside of the
> necessary byte padding.
>
> When a user writes to a variable, the first 8 bytes of data must contain
> the signed update flags as defined by the hypervisor.
>
> When a user reads a variable, the first 4 bytes of data contain the
> policies defined for the object.
>
> Limitations exist due to the underlying implementation of sysfs binary
> attributes, as is the case for the OPAL secvar implementation -
> partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
> (Even when using bin_attributes, which can be larger than a single page,
> sysfs only gives us one page's worth of write buffer at a time, and the
> hypervisor does not expose an interface for partial writes.)
>
> Co-developed-by: Nayna Jain <[email protected]>
> Signed-off-by: Nayna Jain <[email protected]>
> Co-developed-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
> Signed-off-by: Russell Currey <[email protected]>
>
> ---
>
> v2: Remove unnecessary config vars from sysfs and document the others,
> thanks to review from Greg. If we end up needing to expose more, we
> can add them later and update the docs.
>
> Use sysfs_emit() instead of sprintf(), thanks to Greg.
>
> Change the size of the sysfs binary attributes to include the 8-byte
> flags header, preventing truncation of large writes.
>
> v3: plpks_set_variable(): pass var to plpks_signed_update_var() as a
> pointer (mpe)
>
> Update copyright date (ajd)
>
> Consistent comment style (ajd)
>
> Change device_initcall() to machine_arch_initcall(pseries...) so we
> don't try to load on powernv and kill the machine (mpe)
>
> Add config attributes into plpks_secvar_ops (mpe)
>
> Get rid of PLPKS_SECVAR_COUNT macro (mpe)
>
> Reworded descriptions in ABI documentation (mpe)
>
> Switch to using secvar_ops->var_names rather than
> secvar_ops->get_next() (ajd/mpe)
>
> Optimise allocation/copying of buffers (mpe)
>
> Elaborate the comment documenting the "format" string (mpe)
>
> Return -EIO on errors in the read case (mpe)
>
> Add "grubdbx" variable (Sudhakar Kuppusamy)
>
> Use utf8s_to_utf16s() rather than our own "UCS-2" conversion code (mpe)
>
> Change uint64_t to u64 (mpe)
>
> Fix SB_VERSION data length (ruscur)
>
> Stop prepending policy data on read (ruscur)
>
> Enforce max format length on format string (not strictly needed, but
> makes the length limit clear) (ajd)
>
> Update include of plpks.h to reflect new path (ruscur)
>
> Consistent constant naming scheme (ruscur)
>
> v4: Return set_secvar_ops() return code
>
> Pass buffer size to plpks_secvar_format() (stefanb, npiggin)
>
> Add missing null check (stefanb)
>
> Add comment to commit message explaining PAGE_SIZE write limit (joel)
>
> v5: Add comment explaining why we use "key_len - 1" (npiggin)
>
> Use strlen(var.name) instead of hardcoding 10 as length of
> "SB_VERSION" (npiggin)
>
> Improve comments about use of SB_VERSION and format string (npiggin)
>
> Change "+ 8" to "+ sizeof(u64)" when accounting for flags size in
> working out file's max size (npiggin)
>
> Compile plpks-secvar.c based on CONFIG_PPC_SECURE_BOOT, not
> CONFIG_PPC_SECVAR_SYSFS, as the secvar backend is needed for loading
> keys into keyrings even if the sysfs interface is disabled (ajd)
> ---
> Documentation/ABI/testing/sysfs-secvar | 75 +++++-
> arch/powerpc/platforms/pseries/Makefile | 4 +-
> arch/powerpc/platforms/pseries/plpks-secvar.c | 219 ++++++++++++++++++
> 3 files changed, 295 insertions(+), 3 deletions(-)
> create mode 100644 arch/powerpc/platforms/pseries/plpks-secvar.c
>
> diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
> index feebb8c57294..a19f4d5fcec6 100644
> --- a/Documentation/ABI/testing/sysfs-secvar
> +++ b/Documentation/ABI/testing/sysfs-secvar
> @@ -18,6 +18,14 @@ Description: A string indicating which backend is in use by the firmware.
> This determines the format of the variable and the accepted
> format of variable updates.
>
> + On powernv/OPAL, this value is provided by the OPAL firmware
> + and is expected to be "ibm,edk2-compat-v1".
> +
> + On pseries/PLPKS, this is generated by the kernel based on the
> + version number in the SB_VERSION variable in the keystore, and
> + has the form "ibm,plpks-sb-v<version>", or
> + "ibm,plpks-sb-unknown" if there is no SB_VERSION variable.
> +
> What: /sys/firmware/secvar/vars/<variable name>
> Date: August 2019
> Contact: Nayna Jain <[email protected]>
> @@ -34,7 +42,7 @@ Description: An integer representation of the size of the content of the
>
> What: /sys/firmware/secvar/vars/<variable_name>/data
> Date: August 2019
> -Contact: Nayna Jain h<[email protected]>
> +Contact: Nayna Jain <[email protected]>
> Description: A read-only file containing the value of the variable. The size
> of the file represents the maximum size of the variable data.
>
> @@ -44,3 +52,68 @@ Contact: Nayna Jain <[email protected]>
> Description: A write-only file that is used to submit the new value for the
> variable. The size of the file represents the maximum size of
> the variable data that can be written.
> +
> +What: /sys/firmware/secvar/config
> +Date: December 2022
> +Contact: Nayna Jain <[email protected]>
> +Description: This optional directory contains read-only config attributes as
> + defined by the secure variable implementation. All data is in
> + ASCII format. The directory is only created if the backing
> + implementation provides variables to populate it, which at
> + present is only PLPKS on the pseries platform.
> +
> +What: /sys/firmware/secvar/config/version
> +Date: December 2022
> +Contact: Nayna Jain <[email protected]>
> +Description: Config version as reported by the hypervisor in ASCII decimal
> + format.
> +
> + Currently only provided by PLPKS on the pseries platform.
> +
> +What: /sys/firmware/secvar/config/max_object_size
> +Date: December 2022
> +Contact: Nayna Jain <[email protected]>
> +Description: Maximum allowed size of objects in the keystore in bytes,
> + represented in ASCII decimal format.
> +
> + This is not necessarily the same as the max size that can be
> + written to an update file as writes can contain more than
> + object data, you should use the size of the update file for
> + that purpose.
> +
> + Currently only provided by PLPKS on the pseries platform.
> +
> +What: /sys/firmware/secvar/config/total_size
> +Date: December 2022
> +Contact: Nayna Jain <[email protected]>
> +Description: Total size of the PLPKS in bytes, represented in ASCII decimal
> + format.
> +
> + Currently only provided by PLPKS on the pseries platform.
> +
> +What: /sys/firmware/secvar/config/used_space
> +Date: December 2022
> +Contact: Nayna Jain <[email protected]>
> +Description: Current space consumed by the key store, in bytes, represented
> + in ASCII decimal format.
> +
> + Currently only provided by PLPKS on the pseries platform.
> +
> +What: /sys/firmware/secvar/config/supported_policies
> +Date: December 2022
> +Contact: Nayna Jain <[email protected]>
> +Description: Bitmask of supported policy flags by the hypervisor,
> + represented as an 8 byte hexadecimal ASCII string. Consult the
> + hypervisor documentation for what these flags are.
> +
> + Currently only provided by PLPKS on the pseries platform.
> +
> +What: /sys/firmware/secvar/config/signed_update_algorithms
> +Date: December 2022
Need to update date now ?
> +Contact: Nayna Jain <[email protected]>
> +Description: Bitmask of flags indicating which algorithms the hypervisor
> + supports for signed update of objects, represented as a 16 byte
> + hexadecimal ASCII string. Consult the hypervisor documentation
> + for what these flags mean.
> +
> + Currently only provided by PLPKS on the pseries platform.
> diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
> index 92310202bdd7..20a0f3c3fe04 100644
> --- a/arch/powerpc/platforms/pseries/Makefile
> +++ b/arch/powerpc/platforms/pseries/Makefile
> @@ -27,8 +27,8 @@ obj-$(CONFIG_PAPR_SCM) += papr_scm.o
> obj-$(CONFIG_PPC_SPLPAR) += vphn.o
> obj-$(CONFIG_PPC_SVM) += svm.o
> obj-$(CONFIG_FA_DUMP) += rtas-fadump.o
> -obj-$(CONFIG_PSERIES_PLPKS) += plpks.o
> -
> +obj-$(CONFIG_PSERIES_PLPKS) += plpks.o
> +obj-$(CONFIG_PPC_SECURE_BOOT) += plpks-secvar.o
> obj-$(CONFIG_SUSPEND) += suspend.o
> obj-$(CONFIG_PPC_VAS) += vas.o vas-sysfs.o
>
> diff --git a/arch/powerpc/platforms/pseries/plpks-secvar.c b/arch/powerpc/platforms/pseries/plpks-secvar.c
> new file mode 100644
> index 000000000000..04e6cc3f9dd8
> --- /dev/null
> +++ b/arch/powerpc/platforms/pseries/plpks-secvar.c
> @@ -0,0 +1,219 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +// Secure variable implementation using the PowerVM LPAR Platform KeyStore (PLPKS)
> +//
> +// Copyright 2022, 2023 IBM Corporation
> +// Authors: Russell Currey
> +// Andrew Donnellan
> +// Nayna Jain
> +
> +#define pr_fmt(fmt) "secvar: "fmt
> +
> +#include <linux/printk.h>
> +#include <linux/init.h>
> +#include <linux/types.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/kobject.h>
> +#include <linux/nls.h>
> +#include <asm/machdep.h>
> +#include <asm/secvar.h>
> +#include <asm/plpks.h>
> +
> +// Config attributes for sysfs
> +#define PLPKS_CONFIG_ATTR(name, fmt, func) \
> + static ssize_t name##_show(struct kobject *kobj, \
> + struct kobj_attribute *attr, \
> + char *buf) \
> + { \
> + return sysfs_emit(buf, fmt, func()); \
> + } \
> + static struct kobj_attribute attr_##name = __ATTR_RO(name)
> +
> +PLPKS_CONFIG_ATTR(version, "%u\n", plpks_get_version);
> +PLPKS_CONFIG_ATTR(max_object_size, "%u\n", plpks_get_maxobjectsize);
> +PLPKS_CONFIG_ATTR(total_size, "%u\n", plpks_get_totalsize);
> +PLPKS_CONFIG_ATTR(used_space, "%u\n", plpks_get_usedspace);
> +PLPKS_CONFIG_ATTR(supported_policies, "%08x\n", plpks_get_supportedpolicies);
> +PLPKS_CONFIG_ATTR(signed_update_algorithms, "%016llx\n", plpks_get_signedupdatealgorithms);
> +
> +static const struct attribute *config_attrs[] = {
> + &attr_version.attr,
> + &attr_max_object_size.attr,
> + &attr_total_size.attr,
> + &attr_used_space.attr,
> + &attr_supported_policies.attr,
> + &attr_signed_update_algorithms.attr,
> + NULL,
> +};
> +
> +static u32 get_policy(const char *name)
> +{
> + if ((strcmp(name, "db") == 0) ||
> + (strcmp(name, "dbx") == 0) ||
> + (strcmp(name, "grubdb") == 0) ||
> + (strcmp(name, "grubdbx") == 0) ||
> + (strcmp(name, "sbat") == 0))
> + return (PLPKS_WORLDREADABLE | PLPKS_SIGNEDUPDATE);
> + else
> + return PLPKS_SIGNEDUPDATE;
> +}
> +
> +static const char * const plpks_var_names[] = {
> + "PK",
> + "KEK",
> + "db",
> + "dbx",
> + "grubdb",
> + "grubdbx",
> + "sbat",
> + "moduledb",
> + "trustedcadb",
> + NULL,
> +};
> +
> +static int plpks_get_variable(const char *key, u64 key_len, u8 *data,
> + u64 *data_size)
> +{
> + struct plpks_var var = {0};
> + int rc = 0;
> +
> + // We subtract 1 from key_len because we don't need to include the
> + // null terminator at the end of the string
> + var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
> + if (!var.name)
> + return -ENOMEM;
> + rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
> + key_len - 1);
> + if (rc < 0)
> + goto err;
> + var.namelen = rc * 2;
Are you sure this is not just supposed to be 'rc'?
> +
> + var.os = PLPKS_VAR_LINUX;
> + if (data) {
> + var.data = data;
> + var.datalen = *data_size;
> + }
> + rc = plpks_read_os_var(&var);
> +
> + if (rc)
> + goto err;
> +
> + *data_size = var.datalen;
> +
> +err:
> + kfree(var.name);
> + if (rc && rc != -ENOENT) {
> + pr_err("Failed to read variable '%s': %d\n", key, rc);
> + // Return -EIO since userspace probably doesn't care about the
> + // specific error
> + rc = -EIO;
> + }
> + return rc;
> +}
> +
> +static int plpks_set_variable(const char *key, u64 key_len, u8 *data,
> + u64 data_size)
> +{
> + struct plpks_var var = {0};
> + int rc = 0;
> + u64 flags;
> +
> + // Secure variables need to be prefixed with 8 bytes of flags.
> + // We only want to perform the write if we have at least one byte of data.
> + if (data_size <= sizeof(flags))
> + return -EINVAL;
> +
> + // We subtract 1 from key_len because we don't need to include the
> + // null terminator at the end of the string
> + var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
here I would think that it should be key_len * 2 - 1 since utf8s_to_utf16s presumably makes the string longer
> + if (!var.name)
> + return -ENOMEM;
> + rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
> + key_len - 1);
Same here.
> + if (rc < 0)
> + goto err;
> + var.namelen = rc * 2;
Again I would think this should be rc.
> +
> + memcpy(&flags, data, sizeof(flags));
> +
> + var.datalen = data_size - sizeof(flags);
> + var.data = data + sizeof(flags);
> + var.os = PLPKS_VAR_LINUX;
> + var.policy = get_policy(key);
> +
> + // Unlike in the read case, the plpks error code can be useful to
> + // userspace on write, so we return it rather than just -EIO
> + rc = plpks_signed_update_var(&var, flags);
> +
> +err:
> + kfree(var.name);
> + return rc;
> +}
> +
> +// PLPKS dynamic secure boot doesn't give us a format string in the same way OPAL does.
> +// Instead, report the format using the SB_VERSION variable in the keystore.
> +// The string is made up by us, and takes the form "ibm,plpks-sb-v<n>" (or "ibm,plpks-sb-unknown"
> +// if the SB_VERSION variable doesn't exist). Hypervisor defines the SB_VERSION variable as a
> +// "1 byte unsigned integer value".
> +static ssize_t plpks_secvar_format(char *buf, size_t bufsize)
> +{
> + struct plpks_var var = {0};
> + ssize_t ret;
> +
> + var.component = NULL;
> + // Only the signed variables have null bytes in their names, this one doesn't
> + var.name = "SB_VERSION";
> + var.namelen = strlen(var.name);
> + var.datalen = 1;
> + var.data = kzalloc(1, GFP_KERNEL);
> + if (!var.data)
> + return -ENOMEM;
> +
> + // Unlike the other vars, SB_VERSION is owned by firmware instead of the OS
> + ret = plpks_read_fw_var(&var);
> + if (ret) {
> + if (ret == -ENOENT) {
> + ret = snprintf(buf, bufsize, "ibm,plpks-sb-unknown");
> + } else {
> + pr_err("Error %ld reading SB_VERSION from firmware\n", ret);
> + ret = -EIO;
> + }
> + goto err;
> + }
> +
> + ret = snprintf(buf, bufsize, "ibm,plpks-sb-v%hhu", var.data[0]);
> +
> +err:
> + kfree(var.data);
> + return ret;
> +}
> +
> +static int plpks_max_size(u64 *max_size)
> +{
> + // The max object size reported by the hypervisor is accurate for the
> + // object itself, but we use the first 8 bytes of data on write as the
> + // signed update flags, so the max size a user can write is larger.
> + *max_size = (u64)plpks_get_maxobjectsize() + sizeof(u64);
> +
> + return 0;
> +}
> +
> +
> +static const struct secvar_operations plpks_secvar_ops = {
> + .get = plpks_get_variable,
> + .set = plpks_set_variable,
> + .format = plpks_secvar_format,
> + .max_size = plpks_max_size,
> + .config_attrs = config_attrs,
> + .var_names = plpks_var_names,
> +};
> +
> +static int plpks_secvar_init(void)
> +{
> + if (!plpks_is_available())
> + return -ENODEV;
> +
> + return set_secvar_ops(&plpks_secvar_ops);
> +}
> +machine_device_initcall(pseries, plpks_secvar_init);
On 1/31/23 01:39, Andrew Donnellan wrote:
> From: Russell Currey <[email protected]>
>
> Add support for loading keys from the PLPKS on pseries machines, with the
> "ibm,plpks-sb-v1" format.
>
> The object format is expected to be the same, so there shouldn't be any
> functional differences between objects retrieved on powernv or pseries.
>
> Unlike on powernv, on pseries the format string isn't contained in the
> device tree. Use secvar_ops->format() to fetch the format string in a
> generic manner, rather than searching the device tree ourselves.
>
> (The current code searches the device tree for a node compatible with
> "ibm,edk2-compat-v1". This patch switches to calling secvar_ops->format(),
> which in the case of OPAL/powernv means opal_secvar_format(), which
> searches the device tree for a node compatible with "ibm,secvar-backend"
> and checks its "format" property. These are equivalent, as skiboot creates
> a node with both "ibm,edk2-compat-v1" and "ibm,secvar-backend" as
> compatible strings.)
>
> Signed-off-by: Russell Currey <[email protected]>
> Signed-off-by: Andrew Donnellan <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
On Tue, 2023-01-31 at 12:11 -0500, Stefan Berger wrote:
> > +static int plpks_get_variable(const char *key, u64 key_len, u8
> > *data,
> > + u64 *data_size)
> > +{
> > + struct plpks_var var = {0};
> > + int rc = 0;
> > +
> > + // We subtract 1 from key_len because we don't need to
> > include the
> > + // null terminator at the end of the string
> > + var.name = kcalloc(key_len - 1, sizeof(wchar_t),
> > GFP_KERNEL);
> > + if (!var.name)
> > + return -ENOMEM;
> > + rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN,
> > (wchar_t *)var.name,
> > + key_len - 1);
> > + if (rc < 0)
> > + goto err;
> > + var.namelen = rc * 2;
>
> Are you sure this is not just supposed to be 'rc'?
namelen is a length in bytes, not characters, while utf8s_to_utf16s()
returns the number of characters. I suppose this could be clearer by
changing 2 to sizeof(wchar_t).
>
> > +
> > + var.os = PLPKS_VAR_LINUX;
> > + if (data) {
> > + var.data = data;
> > + var.datalen = *data_size;
> > + }
> > + rc = plpks_read_os_var(&var);
> > +
> > + if (rc)
> > + goto err;
> > +
> > + *data_size = var.datalen;
> > +
> > +err:
> > + kfree(var.name);
> > + if (rc && rc != -ENOENT) {
> > + pr_err("Failed to read variable '%s': %d\n", key,
> > rc);
> > + // Return -EIO since userspace probably doesn't
> > care about the
> > + // specific error
> > + rc = -EIO;
> > + }
> > + return rc;
> > +}
> > +
> > +static int plpks_set_variable(const char *key, u64 key_len, u8
> > *data,
> > + u64 data_size)
> > +{
> > + struct plpks_var var = {0};
> > + int rc = 0;
> > + u64 flags;
> > +
> > + // Secure variables need to be prefixed with 8 bytes of
> > flags.
> > + // We only want to perform the write if we have at least
> > one byte of data.
> > + if (data_size <= sizeof(flags))
> > + return -EINVAL;
> > +
> > + // We subtract 1 from key_len because we don't need to
> > include the
> > + // null terminator at the end of the string
> > + var.name = kcalloc(key_len - 1, sizeof(wchar_t),
> > GFP_KERNEL);
> here I would think that it should be key_len * 2 - 1 since
> utf8s_to_utf16s presumably makes the string longer
No, wchar_t is u16, so this allocates (key_len - 1)*sizeof(u16) =
(key_len - 1)*2 bytes.
--
Andrew Donnellan OzLabs, ADL Canberra
[email protected] IBM Australia Limited
On Tue, 2023-01-31 at 11:38 -0500, Stefan Berger wrote:
>
>
> On 1/31/23 01:39, Andrew Donnellan wrote:
> > Currently, plpks_read_var() allocates a buffer to pass to the
> > H_PKS_READ_OBJECT hcall, then allocates another buffer, of the
> > caller's
>
>
> -> buffer of the (no comma)
I'll just remove that clause entirely, it's not really necessary
--
Andrew Donnellan OzLabs, ADL Canberra
[email protected] IBM Australia Limited