The dvb-usb core function only checks if the returned value is
zero, so it doesn't actually matter the error code. Still, returning
-1 as an error condition is something that we don't do upstream. So,
change the logic to return -EIO in case of I2C transfer failures.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
drivers/media/usb/dvb-usb/dw2102.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 2a048499468b..970b84c3f0b5 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -830,7 +830,7 @@ static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
for (i = 0; i < 256; i++) {
if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) < 0) {
err("read eeprom failed.");
- return -1;
+ return -EIO;
} else {
eepromline[i%16] = ibuf[0];
eeprom[i] = ibuf[0];
@@ -869,7 +869,7 @@ static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
ret = s6x0_i2c_transfer(&d->i2c_adap, msg, 2);
if (ret != 2) {
err("read eeprom failed.");
- return -1;
+ return -EIO;
} else {
eepromline[i % 16] = ibuf[0];
eeprom[i] = ibuf[0];
@@ -946,7 +946,7 @@ static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
for (i = 0; i < 6; i++) {
obuf[1] = 0xf0 + i;
if (i2c_transfer(&d->i2c_adap, msg, 2) != 2)
- return -1;
+ return -EIO;
else
mac[i] = ibuf[0];
}
--
2.40.1