Le 04/12/2023 à 19:05, George Stark a écrit :
> In this driver LEDs are registered using devm_led_classdev_register()
> so they are automatically unregistered after module's remove() is done.
> led_classdev_unregister() calls module's led_set_brightness() to turn off
> the LEDs and that callback uses resources which were destroyed already
> in module's remove() so use devm API instead of remove().
>
> Signed-off-by: George Stark <[email protected]>
> ---
> drivers/leds/leds-aw200xx.c | 36 +++++++++++++++++++++++++-----------
> 1 file changed, 25 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/leds/leds-aw200xx.c b/drivers/leds/leds-aw200xx.c
> index 1d3943f86f7f..b1a097c7c879 100644
> --- a/drivers/leds/leds-aw200xx.c
> +++ b/drivers/leds/leds-aw200xx.c
> @@ -10,6 +10,7 @@
> #include <linux/bitfield.h>
> #include <linux/bits.h>
> #include <linux/container_of.h>
> +#include <linux/devm-helpers.h>
> #include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/leds.h>
> @@ -530,6 +531,20 @@ static const struct regmap_config aw200xx_regmap_config = {
> .disable_locking = true,
> };
>
> +static void aw200xx_chip_reset_action(void *data)
> +{
> + const struct aw200xx *chip = (struct aw200xx *)data;
> +
> + aw200xx_chip_reset(chip);
Same as previous patch, no need to cast data and no need for chip at
all, directly do aw200xx_chip_reset(data)
> +}
> +
> +static void aw200xx_disable_action(void *data)
> +{
> + const struct aw200xx *chip = (struct aw200xx *)data;
> +
> + aw200xx_disable(chip);
Same
> +}
> +
> static int aw200xx_probe(struct i2c_client *client)
> {
> const struct aw200xx_chipdef *cdef;
> @@ -568,11 +583,16 @@ static int aw200xx_probe(struct i2c_client *client)
>
> aw200xx_enable(chip);
>
> + ret = devm_add_action(&client->dev, aw200xx_disable_action, chip);
> + if (ret)
> + return ret;
> +
> ret = aw200xx_chip_check(chip);
> if (ret)
> return ret;
>
> - mutex_init(&chip->mutex);
> + if (devm_mutex_init(&client->dev, &chip->mutex))
> + return -ENOMEM;
Why not return value returned by dev_mutex_init() directly ?
>
> /* Need a lock now since after call aw200xx_probe_fw, sysfs nodes created */
> mutex_lock(&chip->mutex);
> @@ -581,6 +601,10 @@ static int aw200xx_probe(struct i2c_client *client)
> if (ret)
> goto out_unlock;
>
> + ret = devm_add_action(&client->dev, aw200xx_chip_reset_action, chip);
> + if (ret)
> + goto out_unlock;
> +
> ret = aw200xx_probe_fw(&client->dev, chip);
> if (ret)
> goto out_unlock;
> @@ -595,15 +619,6 @@ static int aw200xx_probe(struct i2c_client *client)
> return ret;
> }
>
> -static void aw200xx_remove(struct i2c_client *client)
> -{
> - struct aw200xx *chip = i2c_get_clientdata(client);
> -
> - aw200xx_chip_reset(chip);
> - aw200xx_disable(chip);
> - mutex_destroy(&chip->mutex);
> -}
> -
> static const struct aw200xx_chipdef aw20036_cdef = {
> .channels = 36,
> .display_size_rows_max = 3,
> @@ -652,7 +667,6 @@ static struct i2c_driver aw200xx_driver = {
> .of_match_table = aw200xx_match_table,
> },
> .probe_new = aw200xx_probe,
> - .remove = aw200xx_remove,
> .id_table = aw200xx_id,
> };
> module_i2c_driver(aw200xx_driver);