Not sure if this is related to the recent mm/vma fixes - got this
while rebooting (kexec) latest git -
[ 0.000000] Linux version 2.6.34-rc4 (paragw@parag-laptop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #19 SMP PREEMPT Tue Apr 13 20:59:37 EDT 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.34-rc4 root=UUID=0a0bb1b9-978c-4e16-8e43-aae24e172e12 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b8f2f000 (usable)
[ 0.000000] BIOS-e820: 00000000b8f2f000 - 00000000b8f31000 (reserved)
[ 0.000000] BIOS-e820: 00000000b8f31000 - 00000000b9d70000 (usable)
[ 0.000000] BIOS-e820: 00000000b9d70000 - 00000000b9d80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b9d80000 - 00000000bc4e0000 (usable)
[ 0.000000] BIOS-e820: 00000000bc4e0000 - 00000000bc6e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bc6e0000 - 00000000bde92000 (usable)
[ 0.000000] BIOS-e820: 00000000bde92000 - 00000000bde9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000bde9a000 - 00000000bdebf000 (usable)
[ 0.000000] BIOS-e820: 00000000bdebf000 - 00000000bdecf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdecf000 - 00000000bdfcf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdfcf000 - 00000000bdfff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdfff000 - 00000000be000000 (usable)
[ 0.000000] BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0B9D70000 mask FFFFF0000 uncachable
[ 0.000000] 5 base 0C0000000 mask FF0000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000be000000
[ 0.000000] 0000000000 - 00be000000 page 2M
[ 0.000000] kernel direct mapping tables up to be000000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000
[ 0.000000] RAMDISK: 7f797000 - 7fff4000
[ 0.000000] ACPI: RSDP 00000000000f6970 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000bdffe120 0008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
[ 0.000000] ACPI: FACP 00000000bdffc000 000F4 (v03 HPQOEM 30E7 0000000F HP 00000001)
[ 0.000000] ACPI: DSDT 00000000bdfde000 186CB (v01 HPQOEM 30E7 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000bdf9c000 00040
[ 0.000000] ACPI: HPET 00000000bdffb000 00038 (v01 HPQOEM 30E7 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 00000000bdffa000 00084 (v01 HPQOEM 30E7 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000bdff9000 0003C (v01 HPQOEM 30E7 00000001 HP 00000001)
[ 0.000000] ACPI: ASF! 00000000bdff8000 00095 (v32 HPQOEM 30E7 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 00000000bdff7000 00032 (v02 HPQOEM 30E7 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000bdfdb000 003B0 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
[ 0.000000] ACPI: SLIC 00000000bdfd9000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000bdfd8000 007A1 (v01 HPQOEM ATIGFX 00000001 INTL 20060912)
[ 0.000000] ACPI: DMAR 00000000bdfd5000 000B0 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: SSDT 00000000bdfd4000 0066C (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bdfd3000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bdfd2000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002200000-ffff8800059fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b8f2f
[ 0.000000] 0: 0x000b8f31 -> 0x000b9d70
[ 0.000000] 0: 0x000b9d80 -> 0x000bc4e0
[ 0.000000] 0: 0x000bc6e0 -> 0x000bde92
[ 0.000000] 0: 0x000bde9a -> 0x000bdebf
[ 0.000000] 0: 0x000bdfff -> 0x000be000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1039428
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3942 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 759006 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [7000 - 77ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b8f2f000 - 00000000b8f31000
[ 0.000000] PM: Registered nosave memory: 00000000b9d70000 - 00000000b9d80000
[ 0.000000] PM: Registered nosave memory: 00000000bc4e0000 - 00000000bc6e0000
[ 0.000000] PM: Registered nosave memory: 00000000bde92000 - 00000000bde9a000
[ 0.000000] PM: Registered nosave memory: 00000000bdebf000 - 00000000bdecf000
[ 0.000000] PM: Registered nosave memory: 00000000bdecf000 - 00000000bdfcf000
[ 0.000000] PM: Registered nosave memory: 00000000bdfcf000 - 00000000bdfff000
[ 0.000000] PM: Registered nosave memory: 00000000be000000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe80000
[ 0.000000] PM: Registered nosave memory: 00000000ffe80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] early_res array is doubled to 128 at [b000 - bfff]
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880001c00000 s83368 r8192 d23128 u1048576
[ 0.000000] pcpu-alloc: s83368 r8192 d23128 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1021508
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.34-rc4 root=UUID=0a0bb1b9-978c-4e16-8e43-aae24e172e12 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (72 early reservations)
[ 0.000000] #1 [0001000000 - 00019efc78] TEXT DATA BSS
[ 0.000000] #2 [007f797000 - 007fff4000] RAMDISK
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved
[ 0.000000] #4 [00019f0000 - 00019f01a0] BRK
[ 0.000000] #5 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #6 [0000003000 - 0000007000] ACPI WAKEUP
[ 0.000000] #7 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #8 [000000a000 - 000000b000] PGTABLE
[ 0.000000] #9 [00019f01c0 - 00019f11c0] BOOTMEM
[ 0.000000] #10 [00019efc80 - 00019eff80] BOOTMEM
[ 0.000000] #11 [00021f2000 - 00021f3000] BOOTMEM
[ 0.000000] #12 [00021f3000 - 00021f4000] BOOTMEM
[ 0.000000] #13 [0002200000 - 0005a00000] MEMMAP 0
[ 0.000000] #14 [00019f11c0 - 00019f1340] BOOTMEM
[ 0.000000] #15 [00019f1340 - 0001a09340] BOOTMEM
[ 0.000000] #16 [0001a09340 - 0001a0f340] BOOTMEM
[ 0.000000] #17 [0001a10000 - 0001a11000] BOOTMEM
[ 0.000000] #18 [00019eff80 - 00019effc1] BOOTMEM
[ 0.000000] #19 [0001a0f340 - 0001a0f383] BOOTMEM
[ 0.000000] #20 [0001a0f3c0 - 0001a0f970] BOOTMEM
[ 0.000000] #21 [0001a0f980 - 0001a0f9e8] BOOTMEM
[ 0.000000] #22 [0001a0fa00 - 0001a0fa68] BOOTMEM
[ 0.000000] #23 [0001a0fa80 - 0001a0fae8] BOOTMEM
[ 0.000000] #24 [0001a0fb00 - 0001a0fb68] BOOTMEM
[ 0.000000] #25 [0001a0fb80 - 0001a0fbe8] BOOTMEM
[ 0.000000] #26 [0001a0fc00 - 0001a0fc68] BOOTMEM
[ 0.000000] #27 [0001a0fc80 - 0001a0fce8] BOOTMEM
[ 0.000000] #28 [0001a0fd00 - 0001a0fd68] BOOTMEM
[ 0.000000] #29 [0001a0fd80 - 0001a0fde8] BOOTMEM
[ 0.000000] #30 [0001a0fe00 - 0001a0fe68] BOOTMEM
[ 0.000000] #31 [0001a0fe80 - 0001a0fee8] BOOTMEM
[ 0.000000] #32 [0001a0ff00 - 0001a0ff68] BOOTMEM
[ 0.000000] #33 [0001a0ff80 - 0001a0ffe8] BOOTMEM
[ 0.000000] #34 [0001a11000 - 0001a11068] BOOTMEM
[ 0.000000] #35 [0001a11080 - 0001a110e8] BOOTMEM
[ 0.000000] #36 [0001a11100 - 0001a11168] BOOTMEM
[ 0.000000] #37 [0001a11180 - 0001a111e8] BOOTMEM
[ 0.000000] #38 [0001a11200 - 0001a11268] BOOTMEM
[ 0.000000] #39 [0001a11280 - 0001a112e8] BOOTMEM
[ 0.000000] #40 [0001a11300 - 0001a11368] BOOTMEM
[ 0.000000] #41 [0001a11380 - 0001a113e8] BOOTMEM
[ 0.000000] #42 [0001a11400 - 0001a11468] BOOTMEM
[ 0.000000] #43 [0001a11480 - 0001a114e8] BOOTMEM
[ 0.000000] #44 [0001a11500 - 0001a11568] BOOTMEM
[ 0.000000] #45 [0001a11580 - 0001a115e8] BOOTMEM
[ 0.000000] #46 [0001a11600 - 0001a11620] BOOTMEM
[ 0.000000] #47 [0001a11640 - 0001a11660] BOOTMEM
[ 0.000000] #48 [0001a11680 - 0001a116a0] BOOTMEM
[ 0.000000] #49 [0001a116c0 - 0001a116e0] BOOTMEM
[ 0.000000] #50 [0001a11700 - 0001a11720] BOOTMEM
[ 0.000000] #51 [0001a11740 - 0001a11760] BOOTMEM
[ 0.000000] #52 [0001a11780 - 0001a117a0] BOOTMEM
[ 0.000000] #53 [0001a117c0 - 0001a1181e] BOOTMEM
[ 0.000000] #54 [0001a11840 - 0001a1189e] BOOTMEM
[ 0.000000] #55 [0001c00000 - 0001c1c000] BOOTMEM
[ 0.000000] #56 [0001d00000 - 0001d1c000] BOOTMEM
[ 0.000000] #57 [0001a138c0 - 0001a138c8] BOOTMEM
[ 0.000000] #58 [0001a13900 - 0001a13908] BOOTMEM
[ 0.000000] #59 [0001a13940 - 0001a13948] BOOTMEM
[ 0.000000] #60 [0001a13980 - 0001a13990] BOOTMEM
[ 0.000000] #61 [0001a139c0 - 0001a13b00] BOOTMEM
[ 0.000000] #62 [0001a13b00 - 0001a13b60] BOOTMEM
[ 0.000000] #63 [0001a13b80 - 0001a13be0] BOOTMEM
[ 0.000000] #64 [0001a13c00 - 0001a1bc00] BOOTMEM
[ 0.000000] #65 [0001d1c000 - 000211c000] BOOTMEM
[ 0.000000] #66 [0005a00000 - 0005c00000] BOOTMEM
[ 0.000000] #67 [0001a118c0 - 0001a11b00] BOOTMEM
[ 0.000000] #68 [0005c00000 - 0009c00000] BOOTMEM
[ 0.000000] #69 [0001a1bc00 - 0001a3bc00] BOOTMEM
[ 0.000000] #70 [0001a3bc00 - 0001a7bc00] BOOTMEM
[ 0.000000] #71 [000000c000 - 0000014000] BOOTMEM
[ 0.000000] Memory: 4009092k/5242880k available (4101k kernel code, 1085168k absent, 148620k reserved, 4674k data, 608k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2527.140 MHz processor.
[ 0.006676] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.87 BogoMIPS (lpj=8423800)
[ 0.006731] Security Framework initialized
[ 0.006757] Mount-cache hash table entries: 256
[ 0.007057] CPU: Physical Processor ID: 0
[ 0.007063] CPU: Processor Core ID: 0
[ 0.007071] mce: CPU supports 6 MCE banks
[ 0.007087] CPU0: Thermal monitoring handled by SMI
[ 0.007095] using mwait in idle threads.
[ 0.007100] Performance Events: Core2 events, Intel PMU driver.
[ 0.007115] ... version: 2
[ 0.007120] ... bit width: 40
[ 0.007124] ... generic registers: 2
[ 0.007129] ... value mask: 000000ffffffffff
[ 0.007134] ... max period: 000000007fffffff
[ 0.007139] ... fixed-purpose events: 3
[ 0.007144] ... event mask: 0000000700000003
[ 0.010262] ACPI: Core revision 20100121
[ 0.072510] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.072523] ftrace: allocating 15724 entries in 62 pages
[ 0.073421] Setting APIC routing to flat
[ 0.073857] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.107188] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 0a
[ 0.126718] Booting Node 0, Processors #1 Ok.
[ 0.009999] CPU1: Thermal monitoring handled by SMI
[ 0.223361] Brought up 2 CPUs
[ 0.223369] Total of 2 processors activated (10112.47 BogoMIPS).
[ 0.225915] devtmpfs: initialized
[ 0.228390] Time: 21:05:03 Date: 04/13/10
[ 0.228468] NET: Registered protocol family 16
[ 0.228687] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.228695] ACPI: bus type pci registered
[ 0.228842] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.228851] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.425688] PCI: Using configuration type 1 for base access
[ 0.426776] bio: create slab <bio-0> at 0
[ 0.434976] ACPI: EC: Look up EC in DSDT
[ 0.482857] ACPI: BIOS _OSI(Linux) query ignored
[ 0.513501] ACPI: SSDT 00000000bdec7c18 00275 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.516046] ACPI: SSDT 00000000bdec5618 0059A (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.519259] ACPI: SSDT 00000000bdec6e18 001D7 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.521671] ACPI: SSDT 00000000bdec7f18 0008D (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.770506] ACPI: Interpreter enabled
[ 0.770518] ACPI: (supports S0 S3 S4 S5)
[ 0.770582] ACPI: Using IOAPIC for interrupt routing
[ 0.805445] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.805643] ACPI: Power Resource [APPR] (off)
[ 0.806155] ACPI: Power Resource [LPP] (on)
[ 0.806298] ACPI: Power Resource [PGF0] (off)
[ 0.807534] ACPI: No dock devices found.
[ 0.807542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.810906] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.813812] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.813821] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.813829] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.813840] pci_root PNP0A08:00: host bridge window length 0x20000001 doesn't fit in 0xc0000000-0xdfffffff, trimming
[ 0.813849] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.813856] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
[ 0.813864] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xfffffffe] invalid; aligning end to 16-byte boundary
[ 0.813872] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
[ 0.814066] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.814075] pci 0000:00:01.0: PME# disabled
[ 0.814215] pci 0000:00:19.0: reg 10: [mem 0xd8400000-0xd841ffff]
[ 0.814231] pci 0000:00:19.0: reg 14: [mem 0xd8424000-0xd8424fff]
[ 0.814246] pci 0000:00:19.0: reg 18: [io 0x80e0-0x80ff]
[ 0.814339] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.814349] pci 0000:00:19.0: PME# disabled
[ 0.814452] pci 0000:00:1a.0: reg 20: [io 0x80c0-0x80df]
[ 0.814598] pci 0000:00:1a.1: reg 20: [io 0x80a0-0x80bf]
[ 0.814745] pci 0000:00:1a.2: reg 20: [io 0x8080-0x809f]
[ 0.814884] pci 0000:00:1a.7: reg 10: [mem 0xd8425c00-0xd8425fff]
[ 0.814996] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.815006] pci 0000:00:1a.7: PME# disabled
[ 0.815086] pci 0000:00:1b.0: reg 10: [mem 0xd8420000-0xd8423fff 64bit]
[ 0.815186] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.815196] pci 0000:00:1b.0: PME# disabled
[ 0.815361] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.815371] pci 0000:00:1c.0: PME# disabled
[ 0.815535] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.815546] pci 0000:00:1c.1: PME# disabled
[ 0.815710] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.815721] pci 0000:00:1c.2: PME# disabled
[ 0.815888] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.815898] pci 0000:00:1c.4: PME# disabled
[ 0.816017] pci 0000:00:1d.0: reg 20: [io 0x8060-0x807f]
[ 0.816163] pci 0000:00:1d.1: reg 20: [io 0x8040-0x805f]
[ 0.816309] pci 0000:00:1d.2: reg 20: [io 0x8020-0x803f]
[ 0.816449] pci 0000:00:1d.7: reg 10: [mem 0xd8425800-0xd8425bff]
[ 0.816560] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.816571] pci 0000:00:1d.7: PME# disabled
[ 0.816959] pci 0000:00:1f.2: reg 10: [io 0x8108-0x810f]
[ 0.816974] pci 0000:00:1f.2: reg 14: [io 0x8114-0x8117]
[ 0.816989] pci 0000:00:1f.2: reg 18: [io 0x8100-0x8107]
[ 0.817004] pci 0000:00:1f.2: reg 1c: [io 0x8110-0x8113]
[ 0.817018] pci 0000:00:1f.2: reg 20: [io 0x8000-0x801f]
[ 0.817033] pci 0000:00:1f.2: reg 24: [mem 0xd8425000-0xd84257ff]
[ 0.817113] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.817123] pci 0000:00:1f.2: PME# disabled
[ 0.817274] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.817289] pci 0000:01:00.0: reg 14: [io 0x7000-0x70ff]
[ 0.817304] pci 0000:01:00.0: reg 18: [mem 0xd8300000-0xd830ffff]
[ 0.817344] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.817394] pci 0000:01:00.0: supports D1 D2
[ 0.817462] pci 0000:01:00.1: reg 10: [mem 0xd8310000-0xd8313fff]
[ 0.817563] pci 0000:01:00.1: supports D1 D2
[ 0.817603] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.817612] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.817621] pci 0000:00:01.0: bridge window [mem 0xd8300000-0xd83fffff]
[ 0.817633] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.817734] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.817744] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.817754] pci 0000:00:1c.0: bridge window [mem 0xd8200000-0xd82fffff]
[ 0.817770] pci 0000:00:1c.0: bridge window [mem 0xd8500000-0xd86fffff 64bit pref]
[ 0.818110] pci 0000:03:00.0: reg 10: [mem 0xd8100000-0xd8101fff 64bit]
[ 0.818519] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.818558] pci 0000:03:00.0: PME# disabled
[ 0.818664] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.818674] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
[ 0.818685] pci 0000:00:1c.1: bridge window [mem 0xd8100000-0xd81fffff]
[ 0.818700] pci 0000:00:1c.1: bridge window [mem 0xd8700000-0xd88fffff 64bit pref]
[ 0.818801] pci 0000:00:1c.2: PCI bridge to [bus 04-44]
[ 0.818811] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.818822] pci 0000:00:1c.2: bridge window [mem 0xd4100000-0xd80fffff]
[ 0.818837] pci 0000:00:1c.2: bridge window [mem 0xd8900000-0xd8afffff 64bit pref]
[ 0.818938] pci 0000:00:1c.4: PCI bridge to [bus 45-85]
[ 0.818948] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
[ 0.818958] pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd40fffff]
[ 0.818973] pci 0000:00:1c.4: bridge window [mem 0xd8b00000-0xd8cfffff 64bit pref]
[ 0.819110] pci 0000:86:09.0: reg 10: [mem 0xd0001000-0xd00017ff]
[ 0.819219] pci 0000:86:09.0: supports D1 D2
[ 0.819225] pci 0000:86:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819235] pci 0000:86:09.0: PME# disabled
[ 0.819304] pci 0000:86:09.1: reg 10: [mem 0xd0001b00-0xd0001bff]
[ 0.819413] pci 0000:86:09.1: supports D1 D2
[ 0.819419] pci 0000:86:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819430] pci 0000:86:09.1: PME# disabled
[ 0.819502] pci 0000:86:09.2: reg 10: [mem 0xd0001900-0xd00019ff]
[ 0.819611] pci 0000:86:09.2: supports D1 D2
[ 0.819616] pci 0000:86:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819627] pci 0000:86:09.2: PME# disabled
[ 0.819696] pci 0000:86:09.3: reg 10: [mem 0xd0001800-0xd00018ff]
[ 0.819805] pci 0000:86:09.3: supports D1 D2
[ 0.819810] pci 0000:86:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819821] pci 0000:86:09.3: PME# disabled
[ 0.819890] pci 0000:86:09.4: reg 10: [mem 0xd0000000-0xd0000fff]
[ 0.819935] pci 0000:86:09.4: supports D1 D2
[ 0.819941] pci 0000:86:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819952] pci 0000:86:09.4: PME# disabled
[ 0.820054] pci 0000:00:1e.0: PCI bridge to [bus 86-8a] (subtractive decode)
[ 0.820065] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.820076] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.820091] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdfffffff 64bit pref]
[ 0.820098] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.820105] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.820112] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.820119] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.820126] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
[ 0.820133] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[ 0.820274] pci_bus 0000:00: on NUMA node 0
[ 0.820292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.820976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.821275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.821502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.821762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.822180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.822735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.874049] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.874399] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.874744] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.875085] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.875427] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.875768] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.876109] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.876450] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.876766] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.876786] vgaarb: loaded
[ 0.876990] SCSI subsystem initialized
[ 0.877100] usbcore: registered new interface driver usbfs
[ 0.877129] usbcore: registered new interface driver hub
[ 0.877171] usbcore: registered new device driver usb
[ 0.877171] PCI: Using ACPI for IRQ routing
[ 0.877171] PCI: pci_cache_line_size set to 64 bytes
[ 0.877171] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.877171] reserve RAM buffer: 00000000b8f2f000 - 00000000bbffffff
[ 0.877171] reserve RAM buffer: 00000000b9d70000 - 00000000bbffffff
[ 0.877171] reserve RAM buffer: 00000000bc4e0000 - 00000000bfffffff
[ 0.877171] reserve RAM buffer: 00000000bde92000 - 00000000bfffffff
[ 0.877171] reserve RAM buffer: 00000000bdebf000 - 00000000bfffffff
[ 0.877171] reserve RAM buffer: 00000000be000000 - 00000000bfffffff
[ 0.877285] NetLabel: Initializing
[ 0.877290] NetLabel: domain hash size = 128
[ 0.877294] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.877324] NetLabel: unlabeled traffic allowed by default
[ 0.877336] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.877349] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.877364] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.880055] Switching to clocksource tsc
[ 0.903009] pnp: PnP ACPI init
[ 0.903035] ACPI: bus type pnp registered
[ 0.904571] pnp 00:00: resource length 0x20000001 doesn't fit in 0xc0000000-0xdfffffff, trimming
[ 0.914294] alloc irq_desc for 23 on node -1
[ 0.914301] alloc kstat_irqs on node -1
[ 0.915707] pnp: PnP ACPI: found 13 devices
[ 0.915714] ACPI: ACPI bus type pnp unregistered
[ 0.915740] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.915749] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.915757] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.915765] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.915773] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.915781] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.915789] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.915797] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.915815] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.915832] system 00:07: [io 0x0200-0x027f] has been reserved
[ 0.915840] system 00:07: [io 0x1000-0x1003] has been reserved
[ 0.915848] system 00:07: [io 0x1010-0x101f] has been reserved
[ 0.915856] system 00:07: [io 0xffff] has been reserved
[ 0.915863] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.915870] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.915878] system 00:07: [io 0xef80-0xef9f] has been reserved
[ 0.920989] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.921095] PCI: max bus depth: 2 pci_try_num: 3
[ 0.921198] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8320000-0xd833ffff pref]
[ 0.921206] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.921214] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.921225] pci 0000:00:01.0: bridge window [mem 0xd8300000-0xd83fffff]
[ 0.921234] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.921246] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.921255] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.921268] pci 0000:00:1c.0: bridge window [mem 0xd8200000-0xd82fffff]
[ 0.921278] pci 0000:00:1c.0: bridge window [mem 0xd8500000-0xd86fffff 64bit pref]
[ 0.921294] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.921301] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
[ 0.921314] pci 0000:00:1c.1: bridge window [mem 0xd8100000-0xd81fffff]
[ 0.921324] pci 0000:00:1c.1: bridge window [mem 0xd8700000-0xd88fffff 64bit pref]
[ 0.921340] pci 0000:00:1c.2: PCI bridge to [bus 04-44]
[ 0.921347] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.921360] pci 0000:00:1c.2: bridge window [mem 0xd4100000-0xd80fffff]
[ 0.921371] pci 0000:00:1c.2: bridge window [mem 0xd8900000-0xd8afffff 64bit pref]
[ 0.921386] pci 0000:00:1c.4: PCI bridge to [bus 45-85]
[ 0.921394] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
[ 0.921406] pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd40fffff]
[ 0.921417] pci 0000:00:1c.4: bridge window [mem 0xd8b00000-0xd8cfffff 64bit pref]
[ 0.921436] pci 0000:86:09.4: BAR 15: assigned [mem 0xdc000000-0xdfffffff pref]
[ 0.921445] pci 0000:86:09.4: BAR 16: assigned [mem 0xf0000000-0xf3ffffff]
[ 0.921452] pci 0000:86:09.4: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.921459] pci 0000:86:09.4: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.921465] pci 0000:86:09.4: CardBus bridge to [bus 87-8a]
[ 0.921471] pci 0000:86:09.4: bridge window [io 0x2000-0x20ff]
[ 0.921482] pci 0000:86:09.4: bridge window [io 0x2400-0x24ff]
[ 0.921493] pci 0000:86:09.4: bridge window [mem 0xdc000000-0xdfffffff pref]
[ 0.921505] pci 0000:86:09.4: bridge window [mem 0xf0000000-0xf3ffffff]
[ 0.921516] pci 0000:00:1e.0: PCI bridge to [bus 86-8a]
[ 0.921524] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.921537] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.921547] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdfffffff 64bit pref]
[ 0.921575] alloc irq_desc for 16 on node -1
[ 0.921592] alloc kstat_irqs on node -1
[ 0.921604] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.921614] pci 0000:00:01.0: setting latency timer to 64
[ 0.921635] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.921645] pci 0000:00:1c.0: setting latency timer to 64
[ 0.921664] alloc irq_desc for 17 on node -1
[ 0.921668] alloc kstat_irqs on node -1
[ 0.921678] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.921688] pci 0000:00:1c.1: setting latency timer to 64
[ 0.921707] alloc irq_desc for 18 on node -1
[ 0.921712] alloc kstat_irqs on node -1
[ 0.921720] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.921731] pci 0000:00:1c.2: setting latency timer to 64
[ 0.921751] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.921761] pci 0000:00:1c.4: setting latency timer to 64
[ 0.921778] pci 0000:00:1e.0: setting latency timer to 64
[ 0.921799] alloc irq_desc for 22 on node -1
[ 0.921804] alloc kstat_irqs on node -1
[ 0.921813] pci 0000:86:09.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.921827] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.921833] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.921840] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.921846] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
[ 0.921852] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[ 0.921859] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[ 0.921866] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
[ 0.921872] pci_bus 0000:01: resource 1 [mem 0xd8300000-0xd83fffff]
[ 0.921878] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.921886] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.921892] pci_bus 0000:02: resource 1 [mem 0xd8200000-0xd82fffff]
[ 0.921899] pci_bus 0000:02: resource 2 [mem 0xd8500000-0xd86fffff 64bit pref]
[ 0.921905] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.921912] pci_bus 0000:03: resource 1 [mem 0xd8100000-0xd81fffff]
[ 0.921918] pci_bus 0000:03: resource 2 [mem 0xd8700000-0xd88fffff 64bit pref]
[ 0.921925] pci_bus 0000:04: resource 0 [io 0x5000-0x6fff]
[ 0.921931] pci_bus 0000:04: resource 1 [mem 0xd4100000-0xd80fffff]
[ 0.921937] pci_bus 0000:04: resource 2 [mem 0xd8900000-0xd8afffff 64bit pref]
[ 0.921944] pci_bus 0000:45: resource 0 [io 0x3000-0x4fff]
[ 0.921950] pci_bus 0000:45: resource 1 [mem 0xd0100000-0xd40fffff]
[ 0.921956] pci_bus 0000:45: resource 2 [mem 0xd8b00000-0xd8cfffff 64bit pref]
[ 0.921963] pci_bus 0000:86: resource 0 [io 0x2000-0x2fff]
[ 0.921969] pci_bus 0000:86: resource 1 [mem 0xd0000000-0xd00fffff]
[ 0.921975] pci_bus 0000:86: resource 2 [mem 0xdc000000-0xdfffffff 64bit pref]
[ 0.921982] pci_bus 0000:86: resource 4 [io 0x0000-0x0cf7]
[ 0.921988] pci_bus 0000:86: resource 5 [io 0x0d00-0xffff]
[ 0.921994] pci_bus 0000:86: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.922000] pci_bus 0000:86: resource 7 [mem 0xc0000000-0xdfffffff]
[ 0.922006] pci_bus 0000:86: resource 8 [mem 0xf0000000-0xfedfffff]
[ 0.922013] pci_bus 0000:86: resource 9 [mem 0xfee01000-0xffffffff]
[ 0.922019] pci_bus 0000:87: resource 0 [io 0x2000-0x20ff]
[ 0.922025] pci_bus 0000:87: resource 1 [io 0x2400-0x24ff]
[ 0.922031] pci_bus 0000:87: resource 2 [mem 0xdc000000-0xdfffffff pref]
[ 0.922037] pci_bus 0000:87: resource 3 [mem 0xf0000000-0xf3ffffff]
[ 0.922093] NET: Registered protocol family 2
[ 0.922244] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.924211] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.927279] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.928083] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.928089] TCP reno registered
[ 0.928097] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.928154] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.928360] NET: Registered protocol family 1
[ 0.928716] pci 0000:01:00.0: Boot video device
[ 0.928791] PCI: CLS 64 bytes, default 64
[ 0.928901] Trying to unpack rootfs image as initramfs...
[ 1.443611] Freeing initrd memory: 8564k freed
[ 1.450267] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.450281] Placing 64MB software IO TLB between ffff880005c00000 - ffff880009c00000
[ 1.450289] software IO TLB at phys 0x5c00000 - 0x9c00000
[ 1.467891] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.471148] VFS: Disk quotas dquot_6.5.2
[ 1.471271] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.471785] fuse init (API version 7.13)
[ 1.471974] msgmni has been set to 7846
[ 1.472444] alg: No test for stdrng (krng)
[ 1.472561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.472569] io scheduler noop registered
[ 1.472575] io scheduler deadline registered (default)
[ 1.472851] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.472914] alloc irq_desc for 24 on node -1
[ 1.472920] alloc kstat_irqs on node -1
[ 1.472940] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.473105] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.473181] alloc irq_desc for 25 on node -1
[ 1.473186] alloc kstat_irqs on node -1
[ 1.473204] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.473399] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.473474] alloc irq_desc for 26 on node -1
[ 1.473479] alloc kstat_irqs on node -1
[ 1.473496] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 1.473685] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.473760] alloc irq_desc for 27 on node -1
[ 1.473765] alloc kstat_irqs on node -1
[ 1.473782] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 1.473965] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.474040] alloc irq_desc for 28 on node -1
[ 1.474045] alloc kstat_irqs on node -1
[ 1.474062] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 1.474287] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
[ 1.479004] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.479012] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.479019] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.479028] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.479043] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
[ 1.479087] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.479098] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.479111] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
[ 1.479154] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 1.479160] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.479171] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 1.479184] pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
[ 1.479225] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.479236] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.479249] pcieport 0000:00:1c.4: Requesting control of PCIe PME from ACPI BIOS
[ 1.479292] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.479303] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.480303] ACPI: AC Adapter [AC] (on-line)
[ 1.480507] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 1.480515] ACPI: Sleep Button [SLPB]
[ 1.480621] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.480875] ACPI: Lid Switch [LID]
[ 1.480986] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.480993] ACPI: Power Button [PWRF]
[ 1.481362] ACPI: Fan [FANG] (off)
[ 1.487588] Monitor-Mwait will be used to enter C-1 state
[ 1.487659] Monitor-Mwait will be used to enter C-2 state
[ 1.487683] Marking TSC unstable due to TSC halts in idle
[ 1.487916] Switching to clocksource hpet
[ 1.515705] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.515727] ACPI: Thermal Zone [GFXZ] (30 C)
[ 1.526125] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.526147] ACPI: Thermal Zone [DTSZ] (62 C)
[ 1.539548] thermal LNXTHERM:03: registered as thermal_zone2
[ 1.539575] ACPI: Thermal Zone [BATZ] (29 C)
[ 1.548740] thermal LNXTHERM:04: registered as thermal_zone3
[ 1.548761] ACPI: Thermal Zone [CPUZ] (70 C)
[ 1.557329] thermal LNXTHERM:05: registered as thermal_zone4
[ 1.557350] ACPI: Thermal Zone [LOCZ] (49 C)
[ 1.566204] thermal LNXTHERM:06: registered as thermal_zone5
[ 1.566230] ACPI: Thermal Zone [CP2Z] (16 C)
[ 1.569830] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.573154] brd: module loaded
[ 1.574359] loop: module loaded
[ 1.575286] Fixed MDIO Bus: probed
[ 1.575361] PPP generic driver version 2.4.2
[ 1.575433] tun: Universal TUN/TAP device driver, 1.6
[ 1.575439] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.575652] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.577422] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.578207] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.578222] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.578230] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.578238] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.578246] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.578371] mice: PS/2 mouse device common for all mice
[ 1.578585] rtc_cmos 00:08: RTC can wake from S4
[ 1.578662] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.578708] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.578902] device-mapper: uevent: version 1.0.3
[ 1.579146] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[ 1.580924] device-mapper: multipath: version 1.1.1 loaded
[ 1.580931] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.581218] cpuidle: using governor ladder
[ 1.581408] cpuidle: using governor menu
[ 1.582182] TCP cubic registered
[ 1.582503] NET: Registered protocol family 10
[ 1.583470] lo: Disabled Privacy Extensions
[ 1.584154] NET: Registered protocol family 17
[ 1.584392] PM: Checking image partition /dev/sda5
[ 1.600271] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.618708] ACPI: Battery Slot [BAT0] (battery present)
[ 1.619256] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.623421] PM: Resume from disk failed.
[ 1.624208] Magic number: 6:704:95
[ 1.624265] pci_express 0000:00:1c.2:pcie08: hash matches
[ 1.624426] rtc_cmos 00:08: setting system clock to 2010-04-13 21:05:04 UTC (1271192704)
[ 1.624435] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.624440] EDD information not available.
[ 1.624719] Freeing unused kernel memory: 608k freed
[ 1.625038] Write protecting the kernel read-only data: 8192k
[ 1.625966] Freeing unused kernel memory: 2024k freed
[ 1.627166] Freeing unused kernel memory: 168k freed
[ 1.663598] udev: starting version 151
[ 1.978816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.978883] alloc irq_desc for 19 on node -1
[ 1.978889] alloc kstat_irqs on node -1
[ 1.978906] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.978961] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.978970] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.978986] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.979053] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.982948] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.982986] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8425c00
[ 2.001997] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 2.002006] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 2.006701] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.007017] hub 1-0:1.0: USB hub found
[ 2.007031] hub 1-0:1.0: 6 ports detected
[ 2.009743] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.009766] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.010056] alloc irq_desc for 29 on node -1
[ 2.010062] alloc kstat_irqs on node -1
[ 2.010087] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 2.047832] libata version 3.00 loaded.
[ 2.244016] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:81:b3:c2:95
[ 2.244026] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.244060] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1052ff-0ff
[ 2.244150] alloc irq_desc for 20 on node -1
[ 2.244157] alloc kstat_irqs on node -1
[ 2.244175] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.244249] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.244258] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.244277] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.244335] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.248237] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.248272] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd8425800
[ 2.263619] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.263978] hub 2-0:1.0: USB hub found
[ 2.263994] hub 2-0:1.0: 6 ports detected
[ 2.264232] ahci 0000:00:1f.2: version 3.0
[ 2.264269] alloc irq_desc for 21 on node -1
[ 2.264275] alloc kstat_irqs on node -1
[ 2.264292] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.264399] alloc irq_desc for 30 on node -1
[ 2.264404] alloc kstat_irqs on node -1
[ 2.264425] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 2.264519] ahci: SSS flag set, parallel bus scan disabled
[ 2.264585] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 2.264595] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 2.264607] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.284633] scsi0 : ahci
[ 2.285021] scsi1 : ahci
[ 2.285246] scsi2 : ahci
[ 2.285401] scsi3 : ahci
[ 2.285546] scsi4 : ahci
[ 2.285686] scsi5 : ahci
[ 2.286604] ata1: SATA max UDMA/133 abar m2048@0xd8425000 port 0xd8425100 irq 30
[ 2.286613] ata2: SATA max UDMA/133 abar m2048@0xd8425000 port 0xd8425180 irq 30
[ 2.286619] ata3: DUMMY
[ 2.286623] ata4: DUMMY
[ 2.286629] ata5: SATA max UDMA/133 abar m2048@0xd8425000 port 0xd8425300 irq 30
[ 2.286637] ata6: SATA max UDMA/133 abar m2048@0xd8425000 port 0xd8425380 irq 30
[ 2.603654] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.605252] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.607336] ata1.00: ATA-7: CORSAIR CMFSSD-256GBG2D, VBM19C1Q, max UDMA/100
[ 2.607346] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.608383] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.609671] ata1.00: configured for UDMA/100
[ 2.620517] scsi 0:0:0:0: Direct-Access ATA CORSAIR CMFSSD-2 VBM1 PQ: 0 ANSI: 5
[ 2.620971] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.621187] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.621337] sd 0:0:0:0: [sda] Write Protect is off
[ 2.621345] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.621409] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.621786] sda: sda1 sda2 < sda5 sda6 >
[ 2.623175] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.340329] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.353978] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.353992] ata2.00: ATAPI: Optiarc DVD RW AD-7581S, 4H03, max UDMA/100
[ 3.374025] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.374069] ata2.00: configured for UDMA/100
[ 3.391151] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7581S 4H03 PQ: 0 ANSI: 5
[ 3.407448] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.407458] Uniform CD-ROM driver Revision: 3.20
[ 3.407776] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.407950] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.726965] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.060303] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.225190] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 4.234698] SGI XFS Quota Management subsystem
[ 4.241477] XFS mounting filesystem sda6
[ 4.299569] Ending clean XFS mount for filesystem: sda6
[ 4.595091] Adding 11717628k swap on /dev/sda5. Priority:-1 extents:1 across:11717628k SSD
[ 4.873153] udev: starting version 151
[ 5.375349] Linux agpgart interface v0.103
[ 5.389998] ACPI: WMI: Mapper loaded
[ 5.410286] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
[ 5.447500] acpi device:02: registered as cooling_device3
[ 5.448010] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 5.448049] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 5.450821] cfg80211: Calling CRDA to update world regulatory domain
[ 5.477743] [drm] Initialized drm 1.1.0 20060810
[ 5.479481] yenta_cardbus 0000:86:09.4: CardBus bridge found [103c:30e7]
[ 5.485864] sdhci: Secure Digital Host Controller Interface driver
[ 5.485866] sdhci: Copyright(c) Pierre Ossman
[ 5.491963] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 5.505136] cfg80211: World regulatory domain updated:
[ 5.505139] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.505142] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.505144] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.505146] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.505149] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.505151] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.506822] kjournald starting. Commit interval 5 seconds
[ 5.507476] EXT3-fs (sda1): using internal journal
[ 5.507482] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 5.515525] lis3lv02d: hardware type NC693xx found.
[ 5.528571] ppdev: user-space parallel port driver
[ 5.531422] lis3lv02d: 8 bits sensor found
[ 5.593390] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 5.593476] Registered led device: hp::hddprotect
[ 5.593496] lis3lv02d driver loaded.
[ 5.597165] [drm] radeon kernel modesetting enabled.
[ 5.597219] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.597225] radeon 0000:01:00.0: setting latency timer to 64
[ 5.599039] [drm] radeon: Initializing kernel modesetting.
[ 5.605070] yenta_cardbus 0000:86:09.4: ISA IRQ mask 0x0cb8, PCI irq 22
[ 5.605074] yenta_cardbus 0000:86:09.4: Socket status: 30000818
[ 5.605081] yenta_cardbus 0000:86:09.4: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 5.605084] yenta_cardbus 0000:86:09.4: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd00fffff]
[ 5.605087] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd00fffff: excluding 0xd0000000-0xd000ffff
[ 5.605103] yenta_cardbus 0000:86:09.4: pcmcia: parent PCI bridge window: [mem 0xdc000000-0xdfffffff 64bit pref]
[ 5.605105] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdc000000-0xdfffffff: excluding 0xdc000000-0xdfffffff
[ 5.605120] yenta_cardbus 0000:86:09.4: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7]
[ 5.605123] yenta_cardbus 0000:86:09.4: pcmcia: parent PCI bridge window: [io 0x0d00-0xffff]
[ 5.605125] yenta_cardbus 0000:86:09.4: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff]
[ 5.605127] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: clean.
[ 5.605141] yenta_cardbus 0000:86:09.4: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xdfffffff]
[ 5.605144] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xdfffffff: excluding 0xc0000000-0xd8ffffff 0xdc000000-0xdfffffff
[ 5.605186] yenta_cardbus 0000:86:09.4: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xfedfffff]
[ 5.605188] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xfedfffff: excluding 0xf0000000-0xf3ffffff 0xfe800000-0xfeffffff
[ 5.605215] yenta_cardbus 0000:86:09.4: pcmcia: parent PCI bridge window: [mem 0xfee01000-0xffffffff]
[ 5.605217] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfee01000-0xffffffff: excluding 0xffda5000-0x1000fefff
[ 5.605293] [drm] register mmio base: 0xD8300000
[ 5.605295] [drm] register mmio size: 65536
[ 5.605498] ATOM BIOS: HP_Wistron_Vox_M86M
[ 5.605516] [drm] Clocks initialized !
[ 5.605519] [drm] Internal thermal controller with fan control
[ 5.605522] [drm] 7 Power State(s)
[ 5.605523] [drm] State 0 Default (default)
[ 5.605525] [drm] 16 PCIE Lanes
[ 5.605526] [drm] 3 Clock Mode(s)
[ 5.605528] [drm] 0 engine/memory: 600000/700000
[ 5.605530] [drm] 1 engine/memory: 600000/700000
[ 5.605531] [drm] 2 engine/memory: 600000/700000
[ 5.605533] [drm] State 1 Performance
[ 5.605535] [drm] 16 PCIE Lanes
[ 5.605536] [drm] 3 Clock Mode(s)
[ 5.605538] [drm] 0 engine/memory: 110000/405000
[ 5.605539] [drm] 1 engine/memory: 337000/405000
[ 5.605541] [drm] 2 engine/memory: 600000/700000
[ 5.605543] [drm] State 2 Battery
[ 5.605544] [drm] 16 PCIE Lanes
[ 5.605545] [drm] 3 Clock Mode(s)
[ 5.605547] [drm] 0 engine/memory: 110000/405000
[ 5.605549] [drm] 1 engine/memory: 337000/405000
[ 5.605550] [drm] 2 engine/memory: 337000/405000
[ 5.605552] [drm] State 3 Default
[ 5.605553] [drm] 16 PCIE Lanes
[ 5.605555] [drm] 3 Clock Mode(s)
[ 5.605556] [drm] 0 engine/memory: 300000/405000
[ 5.605558] [drm] 1 engine/memory: 450000/700000
[ 5.605560] [drm] 2 engine/memory: 450000/700000
[ 5.605561] [drm] State 4 Performance
[ 5.605563] [drm] 16 PCIE Lanes
[ 5.605564] [drm] 3 Clock Mode(s)
[ 5.605566] [drm] 0 engine/memory: 337000/700000
[ 5.605567] [drm] 1 engine/memory: 337000/700000
[ 5.605569] [drm] 2 engine/memory: 600000/700000
[ 5.605571] [drm] State 5 Battery
[ 5.605572] [drm] 16 PCIE Lanes
[ 5.605573] [drm] 3 Clock Mode(s)
[ 5.605575] [drm] 0 engine/memory: 337000/405000
[ 5.605577] [drm] 1 engine/memory: 337000/405000
[ 5.605578] [drm] 2 engine/memory: 337000/405000
[ 5.605580] [drm] State 6 Default
[ 5.605581] [drm] 16 PCIE Lanes
[ 5.605583] [drm] 3 Clock Mode(s)
[ 5.605584] [drm] 0 engine/memory: 337000/405000
[ 5.605586] [drm] 1 engine/memory: 337000/405000
[ 5.605588] [drm] 2 engine/memory: 337000/405000
[ 5.605593] [drm] radeon: dynamic power management enabled
[ 5.605594] [drm] radeon: power management initialized
[ 5.605605] radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 5.605607] radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 5.605630] [drm] Detected VRAM RAM=256M, BAR=256M
[ 5.605632] [drm] RAM width 128bits DDR
[ 5.609690] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 5.609693] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 5.609780] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.609811] iwlagn 0000:03:00.0: setting latency timer to 64
[ 5.609892] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[ 5.611438] [TTM] Zone kernel: Available graphics memory: 2010228 kiB.
[ 5.611454] [drm] radeon: 256M of VRAM memory ready
[ 5.611456] [drm] radeon: 512M of GTT memory ready.
[ 5.611508] alloc irq_desc for 31 on node -1
[ 5.611510] alloc kstat_irqs on node -1
[ 5.611539] radeon 0000:01:00.0: irq 31 for MSI/MSI-X
[ 5.611571] [drm] radeon: using MSI.
[ 5.611663] [drm] radeon: irq initialized.
[ 5.611666] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.612584] [drm] Loading RV635 Microcode
[ 5.612587] platform radeon_cp.0: firmware: requesting radeon/RV635_pfp.bin
[ 5.618382] sdhci-pci 0000:86:09.1: SDHCI controller found [1180:0822] (rev 25)
[ 5.618401] sdhci-pci 0000:86:09.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 5.619433] sdhci-pci 0000:86:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 5.620474] Registered led device: mmc0::
[ 5.621650] mmc0: SDHCI controller on PCI [0000:86:09.1] using DMA
[ 5.634509] platform radeon_cp.0: firmware: requesting radeon/RV635_me.bin
[ 5.646976] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 5.650398] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 5.650450] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 5.650499] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 5.654244] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 5.654332] alloc irq_desc for 32 on node -1
[ 5.654334] alloc kstat_irqs on node -1
[ 5.664217] iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X
[ 5.674417] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 5.695515] [drm] ring test succeeded in 1 usecs
[ 5.695627] [drm] radeon: ib pool ready.
[ 5.695711] [drm] ib test succeeded in 0 usecs
[ 5.695735] [drm] Default TV standard: NTSC
[ 5.698525] [drm] Radeon Display Connectors
[ 5.698527] [drm] Connector 0:
[ 5.698529] [drm] VGA
[ 5.698531] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 5.698533] [drm] Encoders:
[ 5.698535] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.698536] [drm] Connector 1:
[ 5.698538] [drm] LVDS
[ 5.698539] [drm] Encoders:
[ 5.698540] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 5.698542] [drm] Connector 2:
[ 5.698543] [drm] DVI-D
[ 5.698544] [drm] HPD1
[ 5.698546] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 5.698548] [drm] Encoders:
[ 5.698549] [drm] DFP1: INTERNAL_UNIPHY
[ 5.698551] [drm] Connector 3:
[ 5.698552] [drm] HDMI-A
[ 5.698554] [drm] HPD2
[ 5.698555] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 5.698557] [drm] Encoders:
[ 5.698559] [drm] DFP2: INTERNAL_UNIPHY
[ 5.700269] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
[ 5.707808] [drm] Requested: e: 11000 m: 40500 p: 16
[ 5.707811] [drm] Setting: e: 11000 m: 40500 p: 16
[ 5.745636] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.751641] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.751651] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.751726] alloc irq_desc for 33 on node -1
[ 5.751728] alloc kstat_irqs on node -1
[ 5.751740] HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
[ 5.751772] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.768931] [drm] fb mappable at 0xC0141000
[ 5.768933] [drm] vram apper at 0xC0000000
[ 5.768935] [drm] size 7257600
[ 5.768936] [drm] fb depth is 24
[ 5.768937] [drm] pitch is 6912
[ 5.769070] fb0: radeondrmfb frame buffer device
[ 5.769073] registered panic notifier
[ 5.769078] [drm] Initialized radeon 2.2.0 20080528 for 0000:01:00.0 on minor 0
[ 5.782885] [drm] Requested: e: 60000 m: 70000 p: 16
[ 5.782887] [drm] Setting: e: 60000 m: 70000 p: 16
[ 5.917687] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 5.971393] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 5.972575] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.103499] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd44791/0xb00000
[ 6.103509] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 6.148025] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 6.150539] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.150630] alloc irq_desc for 34 on node -1
[ 6.150632] alloc kstat_irqs on node -1
[ 6.150643] HDA Intel 0000:01:00.1: irq 34 for MSI/MSI-X
[ 6.150675] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.152158] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 6.171924] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.383279] [drm] Requested: e: 33700 m: 40500 p: 16
[ 6.383289] [drm] Setting: e: 33700 m: 40500 p: 16
[ 6.497789] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 6.497803] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: excluding 0xa0000-0xb9fff
[ 6.526398] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd9000000-0xdbffffff: excluding 0xd9f00000-0xda1fffff 0xdae00000-0xdb0fffff
[ 6.531213] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xfe7fffff: clean.
[ 6.537863] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfee01000-0xffda4fff: excluding 0xfeff5000-0xff0eefff 0xff7c5000-0xffe9afff
[ 6.544272] parport_pc 00:09: reported by Plug and Play ACPI
[ 6.544343] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 6.918609] Console: switching to colour frame buffer device 210x65
[ 8.352900] lp0: using parport0 (interrupt-driven).
[ 11.437727] BUG: unable to handle kernel paging request at 0000000000002203
[ 11.437745] IP: [<ffffffff810e4107>] unmap_vmas+0x227/0xa90
[ 11.437764] PGD 0
[ 11.437771] Oops: 0000 [#1] PREEMPT SMP
[ 11.437782] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:86:09.4/local_cpus
[ 11.437792] CPU 1
[ 11.437796] Modules linked in: binfmt_misc lp kvm_intel kvm tpm_infineon snd_hda_codec_atihdmi snd_hda_codec_analog fbcon tileblit font bitblit softcursor snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi pcmcia snd_rawmidi joydev snd_seq_midi_event iwlagn radeon snd_seq iwlcore ttm snd_timer drm_kms_helper hp_accel mac80211 hp_wmi sdhci_pci ppdev sdhci snd_seq_device coretemp intel_agp yenta_socket lis3lv02d rsrc_nonstatic drm cfg80211 input_polldev parport_pc video snd tpm_tis psmouse serio_raw mmc_core pcmcia_core tpm parport output tpm_bios rfkill wmi soundcore i2c_algo_bit led_class snd_page_alloc acpi_cpufreq agpgart ext3 jbd mbcache xfs exportfs ahci libata e1000e ehci_hcd
[ 11.437986]
[ 11.437994] Pid: 484, comm: udevd Not tainted 2.6.34-rc4 #19 30E7/HP EliteBook 8530p
[ 11.438001] RIP: 0010:[<ffffffff810e4107>] [<ffffffff810e4107>] unmap_vmas+0x227/0xa90
[ 11.438015] RSP: 0018:ffff88013dae5cb8 EFLAGS: 00010206
[ 11.438023] RAX: 0000000000002203 RBX: 00007f5fffe49000 RCX: 00007f5fffe49fff
[ 11.438030] RDX: 0000000000001a13 RSI: ffff880001d0d818 RDI: 00007f5fffe4a000
[ 11.438039] RBP: ffff88013dae5df8 R08: 0000000000000000 R09: 0000000000000000
[ 11.438047] R10: ffff8800019eff68 R11: dead000000100100 R12: 00007f5fffe49000
[ 11.438055] R13: 0000000000005e00 R14: ffff88013dacf240 R15: ffff88013ded9500
[ 11.438064] FS: 0000000000000000(0000) GS:ffff880001d00000(0000) knlGS:0000000000000000
[ 11.438072] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 11.438078] CR2: 0000000000002203 CR3: 0000000001805000 CR4: 00000000000406e0
[ 11.438085] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 11.438094] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 11.438102] Process udevd (pid: 484, threadinfo ffff88013dae4000, task ffff88013dae8000)
[ 11.438108] Stack:
[ 11.438112] 0000000000000000 0000000000000000 0000000000000000 ffffea00045150c8
[ 11.438125] <0> ffff88013fb0daa8 0000000000000000 ffff88013dae5e08 ffff88013ded9500
[ 11.438138] <0> ffff88013dae5fd8 000000013fb0dab0 ffffffffffffffff 0000000000000000
[ 11.438155] Call Trace:
[ 11.438170] [<ffffffff810e9cfb>] exit_mmap+0xcb/0x1d0
[ 11.438180] [<ffffffff81045772>] mmput+0x42/0x110
[ 11.438190] [<ffffffff8104a419>] exit_mm+0x109/0x140
[ 11.438203] [<ffffffff813f87c6>] ? _raw_spin_unlock_irq+0x26/0x50
[ 11.438213] [<ffffffff8108ce20>] ? acct_collect+0x160/0x1b0
[ 11.438222] [<ffffffff8104c47c>] do_exit+0x68c/0x7a0
[ 11.438233] [<ffffffff8104c5e1>] do_group_exit+0x51/0xc0
[ 11.438242] [<ffffffff8104c667>] sys_exit_group+0x17/0x20
[ 11.438253] [<ffffffff810030f2>] system_call_fastpath+0x16/0x1b
[ 11.438260] Code: b8 00 00 00 00 80 ff ff ff 48 21 45 80 48 8b 45 80 48 ff c8 48 3b 85 40 ff ff ff 48 8b 85 50 ff ff ff 48 0f 42 7d 80 48 89 7d 80 <48> 8b 38 48 85 ff 0f 84 f5 04 00 00 48 b8 fb 0f 00 00 00 c0 ff
[ 11.438384] RIP [<ffffffff810e4107>] unmap_vmas+0x227/0xa90
[ 11.438395] RSP <ffff88013dae5cb8>
[ 11.438399] CR2: 0000000000002203
[ 11.438407] ---[ end trace febcfea907e44126 ]---
[ 11.438414] Fixing recursive fault but reboot is needed!
[ 11.438420] BUG: scheduling while atomic: udevd/484/0x00000002
[ 11.438426] Modules linked in: binfmt_misc lp kvm_intel kvm tpm_infineon snd_hda_codec_atihdmi snd_hda_codec_analog fbcon tileblit font bitblit softcursor snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi pcmcia snd_rawmidi joydev snd_seq_midi_event iwlagn radeon snd_seq iwlcore ttm snd_timer drm_kms_helper hp_accel mac80211 hp_wmi sdhci_pci ppdev sdhci snd_seq_device coretemp intel_agp yenta_socket lis3lv02d rsrc_nonstatic drm cfg80211 input_polldev parport_pc video snd tpm_tis psmouse serio_raw mmc_core pcmcia_core tpm parport output tpm_bios rfkill wmi soundcore i2c_algo_bit led_class snd_page_alloc acpi_cpufreq agpgart ext3 jbd mbcache xfs exportfs ahci libata e1000e ehci_hcd
[ 11.438612] Pid: 484, comm: udevd Tainted: G D 2.6.34-rc4 #19
[ 11.438619] Call Trace:
[ 11.438629] [<ffffffff81036f07>] __schedule_bug+0x77/0x80
[ 11.438639] [<ffffffff813f5ce5>] schedule+0x835/0x850
[ 11.438650] [<ffffffff8104c4dd>] do_exit+0x6ed/0x7a0
[ 11.438660] [<ffffffff813f8646>] ? _raw_spin_unlock_irqrestore+0x36/0x70
[ 11.438670] [<ffffffff8104919d>] ? kmsg_dump+0x16d/0x1a0
[ 11.438680] [<ffffffff813f9dbf>] oops_end+0xaf/0xf0
[ 11.438692] [<ffffffff8102a03b>] no_context+0xfb/0x260
[ 11.438702] [<ffffffff8102a2c5>] __bad_area_nosemaphore+0x125/0x1e0
[ 11.438713] [<ffffffff8102a393>] bad_area_nosemaphore+0x13/0x20
[ 11.438722] [<ffffffff813fc0c8>] do_page_fault+0x2f8/0x3b0
[ 11.438732] [<ffffffff813f8fe5>] page_fault+0x25/0x30
[ 11.438743] [<ffffffff810e4107>] ? unmap_vmas+0x227/0xa90
[ 11.438752] [<ffffffff810e435b>] ? unmap_vmas+0x47b/0xa90
[ 11.438763] [<ffffffff810e9cfb>] exit_mmap+0xcb/0x1d0
[ 11.438771] [<ffffffff81045772>] mmput+0x42/0x110
[ 11.438780] [<ffffffff8104a419>] exit_mm+0x109/0x140
[ 11.438789] [<ffffffff813f87c6>] ? _raw_spin_unlock_irq+0x26/0x50
[ 11.438798] [<ffffffff8108ce20>] ? acct_collect+0x160/0x1b0
[ 11.438807] [<ffffffff8104c47c>] do_exit+0x68c/0x7a0
[ 11.438817] [<ffffffff8104c5e1>] do_group_exit+0x51/0xc0
[ 11.438825] [<ffffffff8104c667>] sys_exit_group+0x17/0x20
[ 11.438835] [<ffffffff810030f2>] system_call_fastpath+0x16/0x1b
[ 13.392447] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 17.978781] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 18.690014] [drm] Requested: e: 60000 m: 70000 p: 16
[ 18.690018] [drm] Setting: e: 60000 m: 70000 p: 16
[ 19.500017] [drm] Requested: e: 33700 m: 40500 p: 16
[ 19.500021] [drm] Setting: e: 33700 m: 40500 p: 16
[ 35.017959] wlan0: deauthenticating from 00:1e:e5:6a:2c:c2 by local choice (reason=3)
[ 35.018352] wlan0: authenticate with 00:1e:e5:6a:2c:c2 (try 1)
[ 35.021359] wlan0: authenticated
[ 35.021417] wlan0: associate with 00:1e:e5:6a:2c:c2 (try 1)
[ 35.025312] wlan0: RX AssocResp from 00:1e:e5:6a:2c:c2 (capab=0x411 status=0 aid=5)
[ 35.025321] wlan0: associated
[ 35.028567] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.071074] Intel AES-NI instructions are not detected.
[ 35.083429] padlock: VIA PadLock not detected.
[ 45.300268] wlan0: no IPv6 routers present
[ 71.708858] iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:1e:e5:6a:2c:c2 tid = 0
[ 1235.316848] [drm] Requested: e: 11000 m: 40500 p: 16
[ 1235.316859] [drm] Setting: e: 11000 m: 40500 p: 16
[ 1235.333251] [drm] Requested: e: 60000 m: 70000 p: 16
[ 1235.333255] [drm] Setting: e: 60000 m: 70000 p: 16
[ 1235.933293] [drm] Requested: e: 33700 m: 40500 p: 16
[ 1235.933305] [drm] Setting: e: 33700 m: 40500 p: 16
From: Parag Warudkar <[email protected]>
Date: Tue, Apr 13, 2010 at 09:53:46PM -0400
(adding kexec people to Cc)
> Not sure if this is related to the recent mm/vma fixes - got this
> while rebooting (kexec) latest git -
[..]
> [ 11.437727] BUG: unable to handle kernel paging request at 0000000000002203
> [ 11.437745] IP: [<ffffffff810e4107>] unmap_vmas+0x227/0xa90
> [ 11.437764] PGD 0
> [ 11.437771] Oops: 0000 [#1] PREEMPT SMP
> [ 11.437782] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:86:09.4/local_cpus
> [ 11.437792] CPU 1
> [ 11.437796] Modules linked in: binfmt_misc lp kvm_intel kvm tpm_infineon snd_hda_codec_atihdmi snd_hda_codec_analog fbcon tileblit font bitblit softcursor snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi pcmcia snd_rawmidi joydev snd_seq_midi_event iwlagn radeon snd_seq iwlcore ttm snd_timer drm_kms_helper hp_accel mac80211 hp_wmi sdhci_pci ppdev sdhci snd_seq_device coretemp intel_agp yenta_socket lis3lv02d rsrc_nonstatic drm cfg80211 input_polldev parport_pc video snd tpm_tis psmouse serio_raw mmc_core pcmcia_core tpm parport output tpm_bios rfkill wmi soundcore i2c_algo_bit led_class snd_page_alloc acpi_cpufreq agpgart ext3 jbd mbcache xfs exportfs ahci libata e1000e ehci_hcd
> [ 11.437986]
> [ 11.437994] Pid: 484, comm: udevd Not tainted 2.6.34-rc4 #19 30E7/HP EliteBook 8530p
> [ 11.438001] RIP: 0010:[<ffffffff810e4107>] [<ffffffff810e4107>] unmap_vmas+0x227/0xa90
> [ 11.438015] RSP: 0018:ffff88013dae5cb8 EFLAGS: 00010206
> [ 11.438023] RAX: 0000000000002203 RBX: 00007f5fffe49000 RCX: 00007f5fffe49fff
> [ 11.438030] RDX: 0000000000001a13 RSI: ffff880001d0d818 RDI: 00007f5fffe4a000
> [ 11.438039] RBP: ffff88013dae5df8 R08: 0000000000000000 R09: 0000000000000000
> [ 11.438047] R10: ffff8800019eff68 R11: dead000000100100 R12: 00007f5fffe49000
> [ 11.438055] R13: 0000000000005e00 R14: ffff88013dacf240 R15: ffff88013ded9500
> [ 11.438064] FS: 0000000000000000(0000) GS:ffff880001d00000(0000) knlGS:0000000000000000
> [ 11.438072] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 11.438078] CR2: 0000000000002203 CR3: 0000000001805000 CR4: 00000000000406e0
> [ 11.438085] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 11.438094] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [ 11.438102] Process udevd (pid: 484, threadinfo ffff88013dae4000, task ffff88013dae8000)
> [ 11.438108] Stack:
> [ 11.438112] 0000000000000000 0000000000000000 0000000000000000 ffffea00045150c8
> [ 11.438125] <0> ffff88013fb0daa8 0000000000000000 ffff88013dae5e08 ffff88013ded9500
> [ 11.438138] <0> ffff88013dae5fd8 000000013fb0dab0 ffffffffffffffff 0000000000000000
> [ 11.438155] Call Trace:
> [ 11.438170] [<ffffffff810e9cfb>] exit_mmap+0xcb/0x1d0
> [ 11.438180] [<ffffffff81045772>] mmput+0x42/0x110
> [ 11.438190] [<ffffffff8104a419>] exit_mm+0x109/0x140
> [ 11.438203] [<ffffffff813f87c6>] ? _raw_spin_unlock_irq+0x26/0x50
> [ 11.438213] [<ffffffff8108ce20>] ? acct_collect+0x160/0x1b0
> [ 11.438222] [<ffffffff8104c47c>] do_exit+0x68c/0x7a0
> [ 11.438233] [<ffffffff8104c5e1>] do_group_exit+0x51/0xc0
> [ 11.438242] [<ffffffff8104c667>] sys_exit_group+0x17/0x20
> [ 11.438253] [<ffffffff810030f2>] system_call_fastpath+0x16/0x1b
> [ 11.438260] Code: b8 00 00 00 00 80 ff ff ff 48 21 45 80 48 8b 45 80 48 ff c8 48 3b 85 40 ff ff ff 48 8b 85 50 ff ff ff 48 0f 42 7d 80 48 89 7d 80 <48> 8b 38 48 85 ff 0f 84 f5 04 00 00 48 b8 fb 0f 00 00 00 c0 ff
hmm, it doesn't look like it. Your code translates to something like
0: b8 00 00 00 00 mov $0x0,%eax
5: 80 ff ff cmp $0xff,%bh
8: ff 48 21 decl 0x21(%rax)
b: 45 80 48 8b 45 rex.RB orb $0x45,-0x75(%r8)
10: 80 48 ff c8 orb $0xc8,-0x1(%rax)
14: 48 3b 85 40 ff ff ff cmp -0xc0(%rbp),%rax
1b: 48 8b 85 50 ff ff ff mov -0xb0(%rbp),%rax
22: 48 0f 42 7d 80 cmovb -0x80(%rbp),%rdi
27: 48 89 7d 80 mov %rdi,-0x80(%rbp)
2b:* 48 8b 38 mov (%rax),%rdi <-- trapping instruction
2e: 48 85 ff test %rdi,%rdi
31: 0f 84 f5 04 00 00 je 0x52c
37: 48 rex.W
38: b8 fb 0f 00 00 mov $0xffb,%eax
3d: 00 c0 add %al,%al
3f: ff .byte 0xff
which I could correlate with what I get here (comments added):
.loc 1 1051 0
movabsq $549755813888, %rax #, tmp158 PGDIR_SIZE
.LVL392:
leaq (%r12,%rax), %rax #,
movq %rax, -88(%rbp) #, %sfp
movabsq $-549755813888, %rax #, tmp159 PGDIR_MASK
andq %rax, -88(%rbp) # tmp159, %sfp
movq -88(%rbp), %rdx # %sfp, tmp160
movq -72(%rbp), %rax # %sfp, tmp161
decq %rdx # tmp160 __boundary
decq %rax # tmp161 __end
cmpq %rax, %rdx # tmp161, tmp160 rFLAGS
movq -72(%rbp), %rax # %sfp,
cmovb -88(%rbp), %rax # %sfp,,
movq -112(%rbp), %rdx # %sfp, pgd
movq %rax, -88(%rbp) #, %sfp
movq (%rdx), %rax # <variable>.pgd, pgd$pgd
and if this output is correct and if you scroll back a little in your
assemble output, you should probably see that the value computed in
pgd_offset() is being saved in -0x80(%rbp) and reloaded again for use.
So you oops when dereferencing that pgd value in %rax (%rdx in my case),
*pgd in pgd_none_or_clear_bad(pgd) which is called in the below fragment
of unmap_page_range().
pgd = pgd_offset(vma->vm_mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd)) {
(*zap_work)--;
continue;
}
next = zap_pud_range(tlb, vma, pgd, addr, next,
zap_work, details);
} while (pgd++, addr = next, (addr != end && *zap_work > 0));
so it looks like it tries to find a page table rooted at that address
but the pointer value of 0000000000002203 is bogus.
Which might be because when we iterate over the vmas in unmap_vmas, one
of those vma->vm_start is invalid...
--
Regards/Gruss,
Boris.
On Wed, 14 Apr 2010, Borislav Petkov wrote:
>
> hmm, it doesn't look like it. Your code translates to something like
>
> 0: b8 00 00 00 00 mov $0x0,%eax
> 5: 80 ff ff cmp $0xff,%bh
> 8: ff 48 21 decl 0x21(%rax)
> b: 45 80 48 8b 45 rex.RB orb $0x45,-0x75(%r8)
> 10: 80 48 ff c8 orb $0xc8,-0x1(%rax)
There's a large constant (0xffffff8000000000) in there at the beginning,
and the disassembly hasn't found the start of the next instruction very
cleanly. The same is true at the end: another large constant is cut off in
the middle.
The byte just before the dumped instruction stream is almost certainly
'48h', and the last byte of the last constant is 0xff, and the disassembly
ends up being:
0: 48 b8 00 00 00 00 80 mov $0xffffff8000000000,%rax
7: ff ff ff
a: 48 21 45 80 and %rax,-0x80(%rbp)
e: 48 8b 45 80 mov -0x80(%rbp),%rax
12: 48 ff c8 dec %rax
15: 48 3b 85 40 ff ff ff cmp -0xc0(%rbp),%rax
1c: 48 8b 85 50 ff ff ff mov -0xb0(%rbp),%rax
23: 48 0f 42 7d 80 cmovb -0x80(%rbp),%rdi
28: 48 89 7d 80 mov %rdi,-0x80(%rbp)
2c:* 48 8b 38 mov (%rax),%rdi <-- trapping instruction
2f: 48 85 ff test %rdi,%rdi
32: 0f 84 f5 04 00 00 je 0x52d
38: 48 b8 fb 0f 00 00 00 mov $0xffffc00000000ffb,%rax
3f: c0 ff ff
But yes, you found the right spot (that 0xffffff8000000000 constant is
-549755813888 decimal):
> which I could correlate with what I get here (comments added):
Yup. Close enough. Btw, it's often good to look at both the *.s code _and_
the *.lst code. If you do "make mm/memory.lst", you'll find those big
constants easily, and then you'll see the code this way:
do {
next = pgd_addr_end(addr, end);
ffffffff81b2aa45: 48 b8 00 00 00 00 80 mov $0x8000000000,%rax
ffffffff81b2aa4c: 00 00 00
ffffffff81b2aa4f: 49 8d 04 04 lea (%r12,%rax,1),%rax
ffffffff81b2aa53: 48 89 45 a8 mov %rax,-0x58(%rbp)
ffffffff81b2aa57: 48 b8 00 00 00 00 80 mov $0xffffff8000000000,%rax
ffffffff81b2aa5e: ff ff ff
ffffffff81b2aa61: 48 21 45 a8 and %rax,-0x58(%rbp)
ffffffff81b2aa65: 48 8b 45 b8 mov -0x48(%rbp),%rax
ffffffff81b2aa69: 48 8b 55 a8 mov -0x58(%rbp),%rdx
ffffffff81b2aa6d: 48 ff c8 dec %rax
ffffffff81b2aa70: 48 ff ca dec %rdx
ffffffff81b2aa73: 48 39 c2 cmp %rax,%rdx
ffffffff81b2aa76: 48 8b 45 b8 mov -0x48(%rbp),%rax
ffffffff81b2aa7a: 48 8b 55 90 mov -0x70(%rbp),%rdx
ffffffff81b2aa7e: 48 0f 42 45 a8 cmovb -0x58(%rbp),%rax
ffffffff81b2aa83: 48 89 45 a8 mov %rax,-0x58(%rbp)
ffffffff81b2aa87: 48 8b 02 mov (%rdx),%rax
void pud_clear_bad(pud_t *);
void pmd_clear_bad(pmd_t *);
static inline int pgd_none_or_clear_bad(pgd_t *pgd)
{
if (pgd_none(*pgd))
ffffffff81b2aa8a: 48 85 c0 test %rax,%rax
ffffffff81b2aa8d: 74 20 je ffffffff81b2aaaf <unmap_vmas+0x228>
return 1;
if (unlikely(pgd_bad(*pgd))) {
ffffffff81b2aa8f: 48 ba fb 0f 00 00 00 mov $0xffffc00000000ffb,%rdx
ffffffff81b2aa96: c0 ff ff
ffffffff81b2aa99: 48 21 c2 and %rax,%rdx
ffffffff81b2aa9c: 48 83 fa 63 cmp $0x63,%rdx
ffffffff81b2aaa0: 0f 84 d9 04 00 00 je ffffffff81b2af7f <unmap_vmas+0x6f8>
although Parag's compiler has generated much better code (possibly due to
config differences, possibly due to compiler versions)
> So you oops when dereferencing that pgd value in %rax (%rdx in my case),
> *pgd in pgd_none_or_clear_bad(pgd) which is called in the below fragment
> of unmap_page_range().
>
> pgd = pgd_offset(vma->vm_mm, addr);
> do {
> next = pgd_addr_end(addr, end);
> if (pgd_none_or_clear_bad(pgd)) {
> (*zap_work)--;
> continue;
> }
> next = zap_pud_range(tlb, vma, pgd, addr, next,
> zap_work, details);
> } while (pgd++, addr = next, (addr != end && *zap_work > 0));
Correct.
> so it looks like it tries to find a page table rooted at that address
> but the pointer value of 0000000000002203 is bogus.
Yes, it does look like some strange page table corruption, doesn't look
anon_vma related at all. It's intriguing that it started happening now,
though, so..
Linus
From: Linus Torvalds <[email protected]>
Date: Wed, Apr 14, 2010 at 07:32:08AM -0700
Hi Linus,
> On Wed, 14 Apr 2010, Borislav Petkov wrote:
> >
> > hmm, it doesn't look like it. Your code translates to something like
> >
> > 0: b8 00 00 00 00 mov $0x0,%eax
> > 5: 80 ff ff cmp $0xff,%bh
> > 8: ff 48 21 decl 0x21(%rax)
> > b: 45 80 48 8b 45 rex.RB orb $0x45,-0x75(%r8)
> > 10: 80 48 ff c8 orb $0xc8,-0x1(%rax)
>
> There's a large constant (0xffffff8000000000) in there at the beginning,
> and the disassembly hasn't found the start of the next instruction very
> cleanly. The same is true at the end: another large constant is cut off in
> the middle.
>
> The byte just before the dumped instruction stream is almost certainly
> '48h', and the last byte of the last constant is 0xff, and the disassembly
> ends up being:
>
> 0: 48 b8 00 00 00 00 80 mov $0xffffff8000000000,%rax
> 7: ff ff ff
> a: 48 21 45 80 and %rax,-0x80(%rbp)
> e: 48 8b 45 80 mov -0x80(%rbp),%rax
> 12: 48 ff c8 dec %rax
> 15: 48 3b 85 40 ff ff ff cmp -0xc0(%rbp),%rax
> 1c: 48 8b 85 50 ff ff ff mov -0xb0(%rbp),%rax
> 23: 48 0f 42 7d 80 cmovb -0x80(%rbp),%rdi
> 28: 48 89 7d 80 mov %rdi,-0x80(%rbp)
> 2c:* 48 8b 38 mov (%rax),%rdi <-- trapping instruction
> 2f: 48 85 ff test %rdi,%rdi
> 32: 0f 84 f5 04 00 00 je 0x52d
> 38: 48 b8 fb 0f 00 00 00 mov $0xffffc00000000ffb,%rax
> 3f: c0 ff ff
>
> But yes, you found the right spot (that 0xffffff8000000000 constant is
> -549755813888 decimal):
Right, the decodecode output looked kinda strange to me and I tried
to match the instruction order and find the location. But yeah, now
that I'm looking at show_registers(), we don't start dumping on precise
instruction boundary but simply 64 bytes in the default case. No time
for an instruction decoder along that path :).
> > which I could correlate with what I get here (comments added):
>
> Yup. Close enough. Btw, it's often good to look at both the *.s code _and_
> the *.lst code. If you do "make mm/memory.lst", you'll find those big
> constants easily, and then you'll see the code this way:
[..]
ok, I can't say that I'm a linux newbie but the .lst code is new to me.
Damn, and I thought I knew it all :)
> > so it looks like it tries to find a page table rooted at that address
> > but the pointer value of 0000000000002203 is bogus.
>
> Yes, it does look like some strange page table corruption, doesn't look
> anon_vma related at all. It's intriguing that it started happening now,
> though, so..
Well, Parag said something about kexec kernel so it is definitely
interesting what he means there - a kexec-enabled kernel or is this the
"second" kernel his machine kexec'd into after a previous failure. I
think this could clarify the situation a bit.
Thanks for looking over the asm.
--
Regards/Gruss,
Boris.
On Wed, Apr 14, 2010 at 05:22:31PM +0200, Borislav Petkov wrote:
> From: Linus Torvalds <[email protected]>
> Date: Wed, Apr 14, 2010 at 07:32:08AM -0700
>
> Hi Linus,
>
> > On Wed, 14 Apr 2010, Borislav Petkov wrote:
> > >
> > > hmm, it doesn't look like it. Your code translates to something like
> > >
> > > 0: b8 00 00 00 00 mov $0x0,%eax
> > > 5: 80 ff ff cmp $0xff,%bh
> > > 8: ff 48 21 decl 0x21(%rax)
> > > b: 45 80 48 8b 45 rex.RB orb $0x45,-0x75(%r8)
> > > 10: 80 48 ff c8 orb $0xc8,-0x1(%rax)
> >
> > There's a large constant (0xffffff8000000000) in there at the beginning,
> > and the disassembly hasn't found the start of the next instruction very
> > cleanly. The same is true at the end: another large constant is cut off in
> > the middle.
> >
> > The byte just before the dumped instruction stream is almost certainly
> > '48h', and the last byte of the last constant is 0xff, and the disassembly
> > ends up being:
> >
> > 0: 48 b8 00 00 00 00 80 mov $0xffffff8000000000,%rax
> > 7: ff ff ff
> > a: 48 21 45 80 and %rax,-0x80(%rbp)
> > e: 48 8b 45 80 mov -0x80(%rbp),%rax
> > 12: 48 ff c8 dec %rax
> > 15: 48 3b 85 40 ff ff ff cmp -0xc0(%rbp),%rax
> > 1c: 48 8b 85 50 ff ff ff mov -0xb0(%rbp),%rax
> > 23: 48 0f 42 7d 80 cmovb -0x80(%rbp),%rdi
> > 28: 48 89 7d 80 mov %rdi,-0x80(%rbp)
> > 2c:* 48 8b 38 mov (%rax),%rdi <-- trapping instruction
> > 2f: 48 85 ff test %rdi,%rdi
> > 32: 0f 84 f5 04 00 00 je 0x52d
> > 38: 48 b8 fb 0f 00 00 00 mov $0xffffc00000000ffb,%rax
> > 3f: c0 ff ff
> >
> > But yes, you found the right spot (that 0xffffff8000000000 constant is
> > -549755813888 decimal):
>
> Right, the decodecode output looked kinda strange to me and I tried
> to match the instruction order and find the location. But yeah, now
> that I'm looking at show_registers(), we don't start dumping on precise
> instruction boundary but simply 64 bytes in the default case. No time
> for an instruction decoder along that path :).
>
> > > which I could correlate with what I get here (comments added):
> >
> > Yup. Close enough. Btw, it's often good to look at both the *.s code _and_
> > the *.lst code. If you do "make mm/memory.lst", you'll find those big
> > constants easily, and then you'll see the code this way:
>
> [..]
>
> ok, I can't say that I'm a linux newbie but the .lst code is new to me.
> Damn, and I thought I knew it all :)
>
> > > so it looks like it tries to find a page table rooted at that address
> > > but the pointer value of 0000000000002203 is bogus.
> >
> > Yes, it does look like some strange page table corruption, doesn't look
> > anon_vma related at all. It's intriguing that it started happening now,
> > though, so..
>
> Well, Parag said something about kexec kernel so it is definitely
> interesting what he means there - a kexec-enabled kernel or is this the
> "second" kernel his machine kexec'd into after a previous failure. I
> think this could clarify the situation a bit.
FWIW, Just a data point. I pulled in latest kernel and I can boot it
through BIOS as well as kexec boot on my x86_64 box.
Vivek
Hi Borislav
On Wed, Apr 14, 2010 at 11:22 AM, Borislav Petkov <[email protected]> wrote:
> interesting what he means there - a kexec-enabled kernel or is this the
> "second" kernel his machine kexec'd into after a previous failure. I
> think this could clarify the situation a bit.
>
It was the kexec'ed kernel that oopsed - the first kernel had no issues.
It was kexec'ing from 2.6.34-rc4 to the same kernel.
After that I have tried to reboot via kexec to try to reproduce the
issue but it either hung completely or resulted in corrupted X and
non-moving cursor.
Kexec from Distro kernel to itself works just fine (Ubuntu 2.6.32-20) however.
I will start a bisect as soon as find time.
Parag
On środa, 14 kwietnia 2010 o 03:53:46 Parag Warudkar wrote:
> Not sure if this is related to the recent mm/vma fixes - got this
> while rebooting (kexec) latest git -
>
I created a Bugzilla entry at
https://bugzilla.kernel.org/show_bug.cgi?id=15795
for your bug report, please add your address to the CC list in there, thanks!
--
Maciej Rutecki
http://www.maciek.unixy.pl