Hi,
This series corrects a number of issues with NT_PRFPREG regset, most
importantly an FCSR access API regression introduced with the addition of
MSA support, and then a few smaller issues with the get/set handlers.
I have decided to factor out non-MSA and MSA context helpers as the first
step to avoid the issue with excessive indentation that would inevitably
happen if the regression fix was applied to current code as it stands.
It shouldn't be a big deal with backporting as this code hasn't changed
much since the regression, and it will make any future bacports easier.
Only a call to `init_fp_ctx' will have to be trivially resolved (though
arguably commit ac9ad83bc318 ("MIPS: prevent FP context set via ptrace
being discarded"), which has added `init_fp_ctx', would be good to
backport as far as possible instead).
These changes have been verified by examining the register state recorded
in core dumps manually with GDB, as well as by running the GDB test suite.
No user of ptrace(2) PTRACE_GETREGSET and PTRACE_SETREGSET requests is
known for the MIPS port, so this part remains not covered, however it is
assumed to remain consistent with how the creation of core file works.
See individual patch descriptions for further details.
Maciej
From 1586033581117458309@xxx Wed Dec 06 11:24:51 +0000 2017
X-GM-THRID: 1586033581117458309
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread
In preparation to fix a commit 72b22bbad1e7 ("MIPS: Don't assume 64-bit
FP registers for FP regset") FCSR access regression factor out
NT_PRFPREG regset access helpers for the non-MSA and the MSA variants
respectively, to avoid having to deal with excessive indentation in the
actual fix.
No functional change, however use `target->thread.fpu.fpr[0]' rather
than `target->thread.fpu.fpr[i]' for FGR holding type size determination
as there's no `i' variable to refer to anymore, and for the factored out
`i' variable declaration use `unsigned int' rather than `unsigned' as
its type, following the common style.
Cc: [email protected] # v3.15+
Fixes: 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Signed-off-by: Maciej W. Rozycki <[email protected]>
---
arch/mips/kernel/ptrace.c | 108 +++++++++++++++++++++++++++++++++++-----------
1 file changed, 83 insertions(+), 25 deletions(-)
linux-mips-nt-prfpreg-factor-out.diff
Index: linux-sfr-test/arch/mips/kernel/ptrace.c
===================================================================
--- linux-sfr-test.orig/arch/mips/kernel/ptrace.c 2017-11-23 19:18:08.831530000 +0000
+++ linux-sfr-test/arch/mips/kernel/ptrace.c 2017-11-28 22:44:11.537151000 +0000
@@ -410,25 +410,36 @@ static int gpr64_set(struct task_struct
#endif /* CONFIG_64BIT */
-static int fpr_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
+/*
+ * Copy the floating-point context to the supplied NT_PRFPREG buffer,
+ * !CONFIG_CPU_HAS_MSA variant. FP context's general register slots
+ * correspond 1:1 to buffer slots.
+ */
+static int fpr_get_fpa(struct task_struct *target,
+ unsigned int *pos, unsigned int *count,
+ void **kbuf, void __user **ubuf)
{
- unsigned i;
- int err;
- u64 fpr_val;
-
- /* XXX fcr31 */
+ return user_regset_copyout(pos, count, kbuf, ubuf,
+ &target->thread.fpu,
+ 0, sizeof(elf_fpregset_t));
+}
- if (sizeof(target->thread.fpu.fpr[i]) == sizeof(elf_fpreg_t))
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.fpu,
- 0, sizeof(elf_fpregset_t));
+/*
+ * Copy the floating-point context to the supplied NT_PRFPREG buffer,
+ * CONFIG_CPU_HAS_MSA variant. Only lower 64 bits of FP context's
+ * general register slots are copied to buffer slots.
+ */
+static int fpr_get_msa(struct task_struct *target,
+ unsigned int *pos, unsigned int *count,
+ void **kbuf, void __user **ubuf)
+{
+ unsigned int i;
+ u64 fpr_val;
+ int err;
for (i = 0; i < NUM_FPU_REGS; i++) {
fpr_val = get_fpr64(&target->thread.fpu.fpr[i], 0);
- err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ err = user_regset_copyout(pos, count, kbuf, ubuf,
&fpr_val, i * sizeof(elf_fpreg_t),
(i + 1) * sizeof(elf_fpreg_t));
if (err)
@@ -438,27 +449,54 @@ static int fpr_get(struct task_struct *t
return 0;
}
-static int fpr_set(struct task_struct *target,
+/* Copy the floating-point context to the supplied NT_PRFPREG buffer. */
+static int fpr_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
+ void *kbuf, void __user *ubuf)
{
- unsigned i;
int err;
- u64 fpr_val;
/* XXX fcr31 */
- init_fp_ctx(target);
+ if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
+ err = fpr_get_fpa(target, &pos, &count, &kbuf, &ubuf);
+ else
+ err = fpr_get_msa(target, &pos, &count, &kbuf, &ubuf);
- if (sizeof(target->thread.fpu.fpr[i]) == sizeof(elf_fpreg_t))
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.fpu,
- 0, sizeof(elf_fpregset_t));
+ return err;
+}
+
+/*
+ * Copy the supplied NT_PRFPREG buffer to the floating-point context,
+ * !CONFIG_CPU_HAS_MSA variant. Buffer slots correspond 1:1 to FP
+ * context's general register slots.
+ */
+static int fpr_set_fpa(struct task_struct *target,
+ unsigned int *pos, unsigned int *count,
+ const void **kbuf, const void __user **ubuf)
+{
+ return user_regset_copyin(pos, count, kbuf, ubuf,
+ &target->thread.fpu,
+ 0, sizeof(elf_fpregset_t));
+}
+
+/*
+ * Copy the supplied NT_PRFPREG buffer to the floating-point context,
+ * CONFIG_CPU_HAS_MSA variant. Buffer slots are copied to lower 64
+ * bits only of FP context's general register slots.
+ */
+static int fpr_set_msa(struct task_struct *target,
+ unsigned int *pos, unsigned int *count,
+ const void **kbuf, const void __user **ubuf)
+{
+ unsigned int i;
+ u64 fpr_val;
+ int err;
BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
- for (i = 0; i < NUM_FPU_REGS && count >= sizeof(elf_fpreg_t); i++) {
- err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ for (i = 0; i < NUM_FPU_REGS && *count >= sizeof(elf_fpreg_t); i++) {
+ err = user_regset_copyin(pos, count, kbuf, ubuf,
&fpr_val, i * sizeof(elf_fpreg_t),
(i + 1) * sizeof(elf_fpreg_t));
if (err)
@@ -469,6 +507,26 @@ static int fpr_set(struct task_struct *t
return 0;
}
+/* Copy the supplied NT_PRFPREG buffer to the floating-point context. */
+static int fpr_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int err;
+
+ /* XXX fcr31 */
+
+ init_fp_ctx(target);
+
+ if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
+ err = fpr_set_fpa(target, &pos, &count, &kbuf, &ubuf);
+ else
+ err = fpr_set_msa(target, &pos, &count, &kbuf, &ubuf);
+
+ return err;
+}
+
enum mips_regset {
REGSET_GPR,
REGSET_FPR,
From 1586903780349365174@xxx Sat Dec 16 01:56:17 +0000 2017
X-GM-THRID: 1585303686724933226
X-Gmail-Labels: Inbox,Category Forums
Complement commit c23b3d1a5311 ("MIPS: ptrace: Change GP regset to use
correct core dump register layout") and also reject outsized
PTRACE_SETREGSET requests to the NT_PRFPREG regset, like with the
NT_PRSTATUS regset.
Cc: [email protected] # v3.17+
Fixes: c23b3d1a5311 ("MIPS: ptrace: Change GP regset to use correct core dump register layout")
Signed-off-by: Maciej W. Rozycki <[email protected]>
---
arch/mips/kernel/ptrace.c | 3 +++
1 file changed, 3 insertions(+)
linux-mips-nt-prfpreg-size.diff
Index: linux-sfr-test/arch/mips/kernel/ptrace.c
===================================================================
--- linux-sfr-test.orig/arch/mips/kernel/ptrace.c 2017-11-28 23:52:40.373594000 +0000
+++ linux-sfr-test/arch/mips/kernel/ptrace.c 2017-11-28 23:52:47.058649000 +0000
@@ -533,6 +533,9 @@ static int fpr_set(struct task_struct *t
u32 fcr31;
int err;
+ if (pos + count > sizeof(elf_fpregset_t))
+ return -EIO;
+
init_fp_ctx(target);
if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
From 1603835111298113496@xxx Wed Jun 20 23:12:33 +0000 2018
X-GM-THRID: 1585425597562226517
X-Gmail-Labels: Inbox,Category Forums,Downloaded_2018-06
Complement commit d614fd58a283 ("mips/ptrace: Preserve previous
registers for short regset write") and like with the PTRACE_GETREGSET
ptrace(2) request also apply a BUILD_BUG_ON check for the size of the
`elf_fpreg_t' type in the PTRACE_SETREGSET request handler.
Cc: [email protected] # v4.11+
Fixes: d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write")
Signed-off-by: Maciej W. Rozycki <[email protected]>
---
arch/mips/kernel/ptrace.c | 1 +
1 file changed, 1 insertion(+)
linux-mips-nt-prfpreg-build-bug.diff
Index: linux-sfr-test/arch/mips/kernel/ptrace.c
===================================================================
--- linux-sfr-test.orig/arch/mips/kernel/ptrace.c 2017-11-28 23:33:33.395023000 +0000
+++ linux-sfr-test/arch/mips/kernel/ptrace.c 2017-11-28 23:52:34.944549000 +0000
@@ -438,6 +438,7 @@ static int fpr_get_msa(struct task_struc
u64 fpr_val;
int err;
+ BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
for (i = 0; i < NUM_FPU_REGS; i++) {
fpr_val = get_fpr64(&target->thread.fpu.fpr[i], 0);
err = user_regset_copyout(pos, count, kbuf, ubuf,
From 1585404877155430796@xxx Wed Nov 29 12:51:52 +0000 2017
X-GM-THRID: 1585404877155430796
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread
Fix a commit 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for
FP regset") public API regression, then activated by commit 1db1af84d6df
("MIPS: Basic MSA context switching support"), that caused the FCSR
register not to be read or written for CONFIG_CPU_HAS_MSA kernel
configurations (regardless of actual presence or absence of the MSA
feature in a given processor) with ptrace(2) PTRACE_GETREGSET and
PTRACE_SETREGSET requests nor recorded in core dumps.
This is because with !CONFIG_CPU_HAS_MSA configurations the whole of
`elf_fpregset_t' array is bulk-copied as it is, which includes the FCSR
in one half of the last, 33rd slot, whereas with CONFIG_CPU_HAS_MSA
configurations array elements are copied individually, and then only the
leading 32 FGR slots while the remaining slot is ignored.
Correct the code then such that only FGR slots are copied in the
respective !MSA and MSA helpers an then the FCSR slot is handled
separately in common code. Use `ptrace_setfcr31' to update the FCSR
too, so that the read-only mask is respected.
Retrieving a correct value of FCSR is important in debugging not only
for the human to be able to get the right interpretation of the
situation, but for correct operation of GDB as well. This is because
the condition code bits in FSCR are used by GDB to determine the
location to place a breakpoint at when single-stepping through an FPU
branch instruction. If such a breakpoint is placed incorrectly (i.e.
with the condition reversed), then it will be missed, likely causing the
debuggee to run away from the control of GDB and consequently breaking
the process of investigation.
Fortunately GDB continues using the older PTRACE_GETFPREGS ptrace(2)
request which is unaffected, so the regression only really hits with
post-mortem debug sessions using a core dump file, in which case
execution, and consequently single-stepping through branches is not
possible. Of course core files created by buggy kernels out there will
have the value of FCSR recorded clobbered, but such core files cannot be
corrected and the person using them simply will have to be aware that
the value of FCSR retrieved is not reliable.
Which also means we can likely get away without defining a replacement
API which would ensure a correct value of FSCR to be retrieved, or none
at all.
This is based on previous work by Alex Smith, extensively rewritten.
Cc: [email protected] # v3.15+
Fixes: 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Signed-off-by: Alex Smith <[email protected]>
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
---
I think the fix to use `ptrace_setfcr31' could be a separate change, but
given how its absence has been entangled with the inconsistency between
!MSA and MSA I cannot imagine how to do it in a sane manner:
1. If done first, then it would have to be applied to the !MSA case only,
only to be moved to shared code in the next step.
2. If done second, then new incorrect shared code would have to be written
only to be fixed in the next step.
So I think it has to go along with the main fix. Though maybe choosing #2
would make backporting easier, as `ptrace_setfcr31' is v4.1+ only and:
target->thread.fpu.fcr31 = fcr31;
has to be used before that (previously the read-only mask wasn't defined
and you could write arbitrary rubbish to FCSR, especially in the emulated
case).
Thoughts?
Maciej
---
arch/mips/kernel/ptrace.c | 51 +++++++++++++++++++++++++++++++++++-----------
1 file changed, 39 insertions(+), 12 deletions(-)
linux-mips-nt-prfpreg-fcsr.diff
Index: linux-sfr-test/arch/mips/kernel/ptrace.c
===================================================================
--- linux-sfr-test.orig/arch/mips/kernel/ptrace.c 2017-11-28 22:44:11.000000000 +0000
+++ linux-sfr-test/arch/mips/kernel/ptrace.c 2017-11-28 23:33:33.395023000 +0000
@@ -413,7 +413,7 @@ static int gpr64_set(struct task_struct
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer,
* !CONFIG_CPU_HAS_MSA variant. FP context's general register slots
- * correspond 1:1 to buffer slots.
+ * correspond 1:1 to buffer slots. Only general registers are copied.
*/
static int fpr_get_fpa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
@@ -421,13 +421,14 @@ static int fpr_get_fpa(struct task_struc
{
return user_regset_copyout(pos, count, kbuf, ubuf,
&target->thread.fpu,
- 0, sizeof(elf_fpregset_t));
+ 0, NUM_FPU_REGS * sizeof(elf_fpreg_t));
}
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer,
* CONFIG_CPU_HAS_MSA variant. Only lower 64 bits of FP context's
- * general register slots are copied to buffer slots.
+ * general register slots are copied to buffer slots. Only general
+ * registers are copied.
*/
static int fpr_get_msa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
@@ -449,20 +450,29 @@ static int fpr_get_msa(struct task_struc
return 0;
}
-/* Copy the floating-point context to the supplied NT_PRFPREG buffer. */
+/*
+ * Copy the floating-point context to the supplied NT_PRFPREG buffer.
+ * Choose the appropriate helper for general registers, and then copy
+ * the FCSR register separately.
+ */
static int fpr_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
+ const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
int err;
- /* XXX fcr31 */
-
if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
err = fpr_get_fpa(target, &pos, &count, &kbuf, &ubuf);
else
err = fpr_get_msa(target, &pos, &count, &kbuf, &ubuf);
+ if (err)
+ return err;
+
+ err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.fpu.fcr31,
+ fcr31_pos, fcr31_pos + sizeof(u32));
return err;
}
@@ -470,7 +480,7 @@ static int fpr_get(struct task_struct *t
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context,
* !CONFIG_CPU_HAS_MSA variant. Buffer slots correspond 1:1 to FP
- * context's general register slots.
+ * context's general register slots. Only general registers are copied.
*/
static int fpr_set_fpa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
@@ -478,13 +488,14 @@ static int fpr_set_fpa(struct task_struc
{
return user_regset_copyin(pos, count, kbuf, ubuf,
&target->thread.fpu,
- 0, sizeof(elf_fpregset_t));
+ 0, NUM_FPU_REGS * sizeof(elf_fpreg_t));
}
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context,
* CONFIG_CPU_HAS_MSA variant. Buffer slots are copied to lower 64
- * bits only of FP context's general register slots.
+ * bits only of FP context's general register slots. Only general
+ * registers are copied.
*/
static int fpr_set_msa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
@@ -507,22 +518,38 @@ static int fpr_set_msa(struct task_struc
return 0;
}
-/* Copy the supplied NT_PRFPREG buffer to the floating-point context. */
+/*
+ * Copy the supplied NT_PRFPREG buffer to the floating-point context.
+ * Choose the appropriate helper for general registers, and then copy
+ * the FCSR register separately.
+ */
static int fpr_set(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
+ const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
+ u32 fcr31;
int err;
- /* XXX fcr31 */
-
init_fp_ctx(target);
if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
err = fpr_set_fpa(target, &pos, &count, &kbuf, &ubuf);
else
err = fpr_set_msa(target, &pos, &count, &kbuf, &ubuf);
+ if (err)
+ return err;
+
+ if (count > 0) {
+ err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &fcr31,
+ fcr31_pos, fcr31_pos + sizeof(u32));
+ if (err)
+ return err;
+
+ ptrace_setfcr31(target, fcr31);
+ }
return err;
}
From 1584958760749419038@xxx Fri Nov 24 14:41:02 +0000 2017
X-GM-THRID: 1584958760749419038
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread