2015-02-19 00:13:20

by Kevin Tsai

[permalink] [raw]
Subject: [PATCH V1 1/1] iio: light: Added PM support for Capella CM3232 ambient light sensor driver.

Added Power Management Support.

Signed-off-by: Kevin Tsai <[email protected]>
---
v1:
Added Power Management support.

drivers/iio/light/cm3232.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)

diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c
index 90e3519..9e54ea7 100644
--- a/drivers/iio/light/cm3232.c
+++ b/drivers/iio/light/cm3232.c
@@ -378,6 +378,34 @@ static const struct i2c_device_id cm3232_id[] = {
{}
};

+static int cm3232_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct cm3232_chip *chip = iio_priv(indio_dev);
+ struct i2c_client *client = chip->client;
+ int ret;
+
+ chip->regs_cmd |= CM3232_CMD_ALS_DISABLE;
+ ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+ chip->regs_cmd);
+
+ return ret;
+}
+
+static int cm3232_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct cm3232_chip *chip = iio_priv(indio_dev);
+ struct i2c_client *client = chip->client;
+ int ret;
+
+ chip->regs_cmd &= ~CM3232_CMD_ALS_DISABLE;
+ ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+ chip->regs_cmd | CM3232_CMD_ALS_RESET);
+
+ return ret;
+}
+
MODULE_DEVICE_TABLE(i2c, cm3232_id);

static const struct of_device_id cm3232_of_match[] = {
@@ -385,11 +413,15 @@ static const struct of_device_id cm3232_of_match[] = {
{}
};

+static const struct dev_pm_ops cm3232_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(cm3232_suspend, cm3232_resume)};
+
static struct i2c_driver cm3232_driver = {
.driver = {
.name = "cm3232",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(cm3232_of_match),
+ .pm = &cm3232_pm_ops,
},
.id_table = cm3232_id,
.probe = cm3232_probe,
--
1.8.3.1


2015-02-19 07:15:31

by Peter Meerwald-Stadler

[permalink] [raw]
Subject: Re: [PATCH V1 1/1] iio: light: Added PM support for Capella CM3232 ambient light sensor driver.


> Added Power Management Support.

comments below

> Signed-off-by: Kevin Tsai <[email protected]>
> ---
> v1:
> Added Power Management support.
>
> drivers/iio/light/cm3232.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c
> index 90e3519..9e54ea7 100644
> --- a/drivers/iio/light/cm3232.c
> +++ b/drivers/iio/light/cm3232.c
> @@ -378,6 +378,34 @@ static const struct i2c_device_id cm3232_id[] = {
> {}
> };
>
> +static int cm3232_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct cm3232_chip *chip = iio_priv(indio_dev);
> + struct i2c_client *client = chip->client;
> + int ret;
> +
> + chip->regs_cmd |= CM3232_CMD_ALS_DISABLE;
> + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
> + chip->regs_cmd);
> +
> + return ret;
> +}
> +

these functions are not used when CONFIG_PM_SLEEP is not #defined, leading
to warning

> +static int cm3232_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct cm3232_chip *chip = iio_priv(indio_dev);
> + struct i2c_client *client = chip->client;
> + int ret;
> +
> + chip->regs_cmd &= ~CM3232_CMD_ALS_DISABLE;
> + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
> + chip->regs_cmd | CM3232_CMD_ALS_RESET);
> +
> + return ret;
> +}
> +
> MODULE_DEVICE_TABLE(i2c, cm3232_id);
>
> static const struct of_device_id cm3232_of_match[] = {
> @@ -385,11 +413,15 @@ static const struct of_device_id cm3232_of_match[] = {
> {}
> };
>
> +static const struct dev_pm_ops cm3232_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(cm3232_suspend, cm3232_resume)};

probably put the closing brace in the next line

> +
> static struct i2c_driver cm3232_driver = {
> .driver = {
> .name = "cm3232",
> .owner = THIS_MODULE,
> .of_match_table = of_match_ptr(cm3232_of_match),
> + .pm = &cm3232_pm_ops,
> },
> .id_table = cm3232_id,
> .probe = cm3232_probe,
>

--

Peter Meerwald
+43-664-2444418 (mobile)