Makefile and Kconfig: add configuration for mb12x2 ultrasonic proximity
driver
Signed-off-by: Andreas Klinger <[email protected]>
---
drivers/iio/proximity/Kconfig | 11 +++++++++++
drivers/iio/proximity/Makefile | 1 +
2 files changed, 12 insertions(+)
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index b99367a89f81..5d57ca44e30d 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -45,6 +45,17 @@ config LIDAR_LITE_V2
To compile this driver as a module, choose M here: the
module will be called pulsedlight-lite-v2
+config MB12X2
+ tristate "MaxSonar MB12X2 family ultrasonic sensors"
+ depends on I2C
+ help
+ Say Y to build a driver for the ultrasonic sensors of MaxSonar
+ with i2c interface. It can be used to measure the distance of
+ objects.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mb12x2.
+
config RFD77402
tristate "RFD77402 ToF sensor"
depends on I2C
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
index 6d031f903c4c..c56b72a8be87 100644
--- a/drivers/iio/proximity/Makefile
+++ b/drivers/iio/proximity/Makefile
@@ -6,6 +6,7 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AS3935) += as3935.o
obj-$(CONFIG_ISL29501) += isl29501.o
+obj-$(CONFIG_MB12X2) += mb12x2.o
obj-$(CONFIG_LIDAR_LITE_V2) += pulsedlight-lidar-lite-v2.o
obj-$(CONFIG_RFD77402) += rfd77402.o
obj-$(CONFIG_SRF04) += srf04.o
--
2.11.0
Am 24.02.19 um 17:22 schrieb Andreas Klinger:
> Makefile and Kconfig: add configuration for mb12x2 ultrasonic proximity
> driver
>
> Signed-off-by: Andreas Klinger <[email protected]>
> ---
> drivers/iio/proximity/Kconfig | 11 +++++++++++
> drivers/iio/proximity/Makefile | 1 +
> 2 files changed, 12 insertions(+)
>
> diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
> index b99367a89f81..5d57ca44e30d 100644
> --- a/drivers/iio/proximity/Kconfig
> +++ b/drivers/iio/proximity/Kconfig
> @@ -45,6 +45,17 @@ config LIDAR_LITE_V2
> To compile this driver as a module, choose M here: the
> module will be called pulsedlight-lite-v2
>
> +config MB12X2
> + tristate "MaxSonar MB12X2 family ultrasonic sensors"
> + depends on I2C
> + help
> + Say Y to build a driver for the ultrasonic sensors of MaxSonar
> + with i2c interface. It can be used to measure the distance of
> + objects.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called mb12x2.
> +
> config RFD77402
> tristate "RFD77402 ToF sensor"
> depends on I2C
> diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
> index 6d031f903c4c..c56b72a8be87 100644
> --- a/drivers/iio/proximity/Makefile
> +++ b/drivers/iio/proximity/Makefile
> @@ -6,6 +6,7 @@
> # When adding new entries keep the list in alphabetical order
> obj-$(CONFIG_AS3935) += as3935.o
> obj-$(CONFIG_ISL29501) += isl29501.o
> +obj-$(CONFIG_MB12X2) += mb12x2.o
This commit will fail to build, as you add the source file only in 3/4.
It needs to be in this patch.
Regards,
Andreas
> obj-$(CONFIG_LIDAR_LITE_V2) += pulsedlight-lidar-lite-v2.o
> obj-$(CONFIG_RFD77402) += rfd77402.o
> obj-$(CONFIG_SRF04) += srf04.o
>
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
On Sun, 24 Feb 2019, Andreas Klinger wrote:
> Makefile and Kconfig: add configuration for mb12x2 ultrasonic proximity
> driver
>
> diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
> index 6d031f903c4c..c56b72a8be87 100644
> --- a/drivers/iio/proximity/Makefile
> +++ b/drivers/iio/proximity/Makefile
> @@ -6,6 +6,7 @@
> # When adding new entries keep the list in alphabetical order
> obj-$(CONFIG_AS3935) += as3935.o
> obj-$(CONFIG_ISL29501) += isl29501.o
> +obj-$(CONFIG_MB12X2) += mb12x2.o
alphabetic order please
> obj-$(CONFIG_LIDAR_LITE_V2) += pulsedlight-lidar-lite-v2.o
> obj-$(CONFIG_RFD77402) += rfd77402.o
> obj-$(CONFIG_SRF04) += srf04.o
>
--
Peter Meerwald-Stadler
Mobile: +43 664 24 44 418