Correct the Kconfig help text for SERIAL_8250_LPSS, SERIAL_8250_MID and
SERIAL_8250_PERICOM configuration options for dedicated PCI UART drivers
that have been blacklisted in the generic PCI 8250 UART driver and as
from commit a13e19cf3dc10 ("serial: 8250_lpss: split LPSS driver to
separate module"), commit d9eda9bab2372 ("serial: 8250_pci: Intel MID
UART support to its own driver"), and commit fcfd3c09f4078 ("serial:
8250_pci: Split out Pericom driver") respectively are not handled by
said driver anymore (rather than for extra features only, as the current
text indicates), and therefore require the respective dedicated drivers
to work at all.
Signed-off-by: Maciej W. Rozycki <[email protected]>
---
No changes from v1.
---
drivers/tty/serial/8250/Kconfig | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
linux-serial-8250-pci-blacklist-help.diff
Index: linux-macro/drivers/tty/serial/8250/Kconfig
===================================================================
--- linux-macro.orig/drivers/tty/serial/8250/Kconfig
+++ linux-macro/drivers/tty/serial/8250/Kconfig
@@ -479,11 +479,12 @@ config SERIAL_8250_LPSS
select DW_DMAC_PCI if (SERIAL_8250_DMA && X86_INTEL_LPSS)
select RATIONAL
help
- Selecting this option will enable handling of the extra features
- present on the UART found on various Intel platforms such as:
+ Selecting this option will enable handling of the UART found on
+ various Intel platforms such as:
- Intel Baytrail SoC
- Intel Braswell SoC
- Intel Quark X1000 SoC
+ that are not covered by the more generic SERIAL_8250_PCI option.
config SERIAL_8250_MID
tristate "Support for serial ports on Intel MID platforms"
@@ -494,17 +495,18 @@ config SERIAL_8250_MID
select HSU_DMA_PCI if (HSU_DMA && X86_INTEL_MID)
select RATIONAL
help
- Selecting this option will enable handling of the extra features
- present on the UART found on Intel Medfield SOC and various other
- Intel platforms.
+ Selecting this option will enable handling of the UART found on
+ Intel Medfield SOC and various other Intel platforms that is not
+ covered by the more generic SERIAL_8250_PCI option.
config SERIAL_8250_PERICOM
tristate "Support for Pericom and Acces I/O serial ports"
default SERIAL_8250
depends on SERIAL_8250 && PCI
help
- Selecting this option will enable handling of the extra features
- present on the Pericom and Acces I/O UARTs.
+ Selecting this option will enable handling of the Pericom and Acces
+ I/O UARTs that are not covered by the more generic SERIAL_8250_PCI
+ option.
config SERIAL_8250_PXA
tristate "PXA serial port support"