SA1101 doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <[email protected]>
---
arch/arm/mach-sa1100/include/mach/SA-1101.h | 925 --------------------------
arch/arm/mach-sa1100/include/mach/hardware.h | 4 -
2 files changed, 0 insertions(+), 929 deletions(-)
delete mode 100644 arch/arm/mach-sa1100/include/mach/SA-1101.h
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
deleted file mode 100644
index 5d2ad7d..0000000
--- a/arch/arm/mach-sa1100/include/mach/SA-1101.h
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * SA-1101.h
- *
- * Copyright (c) Peter Danielsson 1999
- *
- * Definition of constants related to the sa1101
- * support chip for the sa1100
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1101.h
-#endif
-
-#ifndef SA1101_BASE
-#error You must define SA-1101 physical base address
-#endif
-
-#ifndef LANGUAGE
-# ifdef __ASSEMBLY__
-# define LANGUAGE Assembly
-# else
-# define LANGUAGE C
-# endif
-#endif
-
-/*
- * We have mapped the sa1101 depending on the value of SA1101_BASE.
- * It then appears from 0xf4000000.
- */
-
-#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000)
-#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE)
-
-#ifndef SA1101_p2v
-#define SA1101_p2v(PhAdd) (PhAdd)
-#endif
-
-#include <mach/bitfield.h>
-
-#define C 0
-#define Assembly 1
-
-
-/*
- * Memory map
- */
-
-#define __SHMEM_CONTROL0 0x00000000
-#define __SYSTEM_CONTROL1 0x00000400
-#define __ARBITER 0x00020000
-#define __SYSTEM_CONTROL2 0x00040000
-#define __SYSTEM_CONTROL3 0x00060000
-#define __PARALLEL_PORT 0x00080000
-#define __VIDMEM_CONTROL 0x00100000
-#define __UPDATE_FIFO 0x00120000
-#define __SHMEM_CONTROL1 0x00140000
-#define __INTERRUPT_CONTROL 0x00160000
-#define __USB_CONTROL 0x00180000
-#define __TRACK_INTERFACE 0x001a0000
-#define __MOUSE_INTERFACE 0x001b0000
-#define __KEYPAD_INTERFACE 0x001c0000
-#define __PCMCIA_INTERFACE 0x001e0000
-#define __VGA_CONTROL 0x00200000
-#define __GPIO_INTERFACE 0x00300000
-
-/*
- * Macro that calculates real address for registers in the SA-1101
- */
-
-#define _SA1101( x ) ((x) + SA1101_BASE)
-
-/*
- * Interface and shared memory controller registers
- *
- * Registers
- * SKCR SA-1101 control register (read/write)
- * SMCR Shared Memory Controller Register
- * SNPR Snoop Register
- */
-
-#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
-#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
-#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */
-
-#if LANGUAGE == C
-#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR)))
-#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR)))
-#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR)))
-
-#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */
-#define SKCR_BCLKEn 0x0002 /* Enables BCLK */
-#define SKCR_Sleep 0x0004 /* Sleep Mode */
-#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */
-#define SKCR_VCOON 0x0010 /* VCO bias */
-#define SKCR_ScanTestEn 0x0020 /* Enables scan test */
-#define SKCR_ClockTestEn 0x0040 /* Enables clock test */
-
-#define SMCR_DCAC Fld(2,0) /* Number of column address bits */
-#define SMCR_DRAC Fld(2,2) /* Number of row address bits */
-#define SMCR_ArbiterBias 0x0008 /* favor video or USB */
-#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */
-
-#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \
- (( (x) - 8 ) << FShft (SMCR_DCAC))
-#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\
- (( (x) - 9 ) << FShft (SMCR_DRAC))
-
-#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */
-#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */
-#define SNPR_WholeBank (1 << 23) /* Whole bank bit */
-#define SNPR_BankSelect Fld(2,27) /* Bank select */
-#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */
-
-#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \
- ( (x) << FShft (SNPR_VFBsize))
-#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \
- (( (x) + 1 ) << FShft (SNPR_BankSelect ))
-
-#endif /* LANGUAGE == C */
-
-/*
- * Video Memory Controller
- *
- * Registers
- * VMCCR Configuration register
- * VMCAR VMC address register
- * VMCDR VMC data register
- *
- */
-
-#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */
-#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */
-#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */
-
-#if LANGUAGE == C
-#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR)))
-#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR)))
-#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR)))
-
-#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */
-#define VMCCR_Config 0x0001 /* DRAM size */
-#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */
-#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */
-#define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/
-#define VMCCR_RefTest (1<<10) /* refresh test */
-#define VMCCR_RefLow Fld(6,11) /* refresh low counter */
-#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */
-#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */
-#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */
-
-#endif LANGUAGE == C
-
-
-/* Update FIFO
- *
- * Registers
- * UFCR Update FIFO Control Register
- * UFSR Update FIFO Status Register
- * UFLVLR update FIFO level register
- * UFDR update FIFO data register
- */
-
-#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */
-#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */
-#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */
-#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */
-
-#if LANGUAGE == C
-
-#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR)))
-#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR)))
-#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR)))
-#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR)))
-
-
-#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */
-
-#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */
-
-#endif /* LANGUAGE == C */
-
-/* System Controller
- *
- * Registers
- * SKPCR Power Control Register
- * SKCDR Clock Divider Register
- * DACDR1 DAC1 Data register
- * DACDR2 DAC2 Data register
- */
-
-#define _SKPCR _SA1101(0x00000400)
-#define _SKCDR _SA1101(0x00040000)
-#define _DACDR1 _SA1101(0x00060000)
-#define _DACDR2 _SA1101(0x00060400)
-
-#if LANGUAGE == C
-#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR)))
-#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR)))
-#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1)))
-#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2)))
-
-#define SKPCR_UCLKEn 0x01 /* USB Enable */
-#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */
-#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */
-#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */
-#define SKPCR_PICLKEn 0x10 /* parallel port Enable */
-#define SKPCR_DCLKEn 0x20 /* DACs Enable */
-#define SKPCR_nKPADEn 0x40 /* Multiplexer */
-
-#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */
-#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */
-#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */
-#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */
-#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */
-#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */
-#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */
-#define SKDCR_ChargePump (1<<25) /* Charge pump control */
-#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */
-#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */
-#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */
-
-#define DACDR_DACCount Fld(8,0) /* Count value */
-#define DACDR1_DACCount DACDR_DACCount
-#define DACDR2_DACCount DACDR_DACCount
-
-#endif /* LANGUAGE == C */
-
-/*
- * Parallel Port Interface
- *
- * Registers
- * IEEE_Config IEEE mode selection and programmable attributes
- * IEEE_Control Controls the states of IEEE port control outputs
- * IEEE_Data Forward transfer data register
- * IEEE_Addr Forward transfer address register
- * IEEE_Status Port IO signal status register
- * IEEE_IntStatus Port interrupts status register
- * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels
- * IEEE_InitTime Forward timeout counter initial value
- * IEEE_TimerStatus Forward timeout counter current value
- * IEEE_FifoReset Reset forward transfer FIFO
- * IEEE_ReloadValue Counter reload value
- * IEEE_TestControl Control testmode
- * IEEE_TestDataIn Test data register
- * IEEE_TestDataInEn Enable test data
- * IEEE_TestCtrlIn Test control signals
- * IEEE_TestCtrlInEn Enable test control signals
- * IEEE_TestDataStat Current data bus value
- *
- */
-
-/*
- * The control registers are defined as offsets from a base address
- */
-
-#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
-
-#define _IEEE_Config _IEEE( 0x0000 )
-#define _IEEE_Control _IEEE( 0x0400 )
-#define _IEEE_Data _IEEE( 0x4000 )
-#define _IEEE_Addr _IEEE( 0x0800 )
-#define _IEEE_Status _IEEE( 0x0c00 )
-#define _IEEE_IntStatus _IEEE( 0x1000 )
-#define _IEEE_FifoLevels _IEEE( 0x1400 )
-#define _IEEE_InitTime _IEEE( 0x1800 )
-#define _IEEE_TimerStatus _IEEE( 0x1c00 )
-#define _IEEE_FifoReset _IEEE( 0x2000 )
-#define _IEEE_ReloadValue _IEEE( 0x3c00 )
-#define _IEEE_TestControl _IEEE( 0x2400 )
-#define _IEEE_TestDataIn _IEEE( 0x2800 )
-#define _IEEE_TestDataInEn _IEEE( 0x2c00 )
-#define _IEEE_TestCtrlIn _IEEE( 0x3000 )
-#define _IEEE_TestCtrlInEn _IEEE( 0x3400 )
-#define _IEEE_TestDataStat _IEEE( 0x3800 )
-
-
-#if LANGUAGE == C
-#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
-#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
-#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
-#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
-#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
-#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
-#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
-#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
-#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
-#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
-#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
-#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
-#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
-#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
-#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
-#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
-#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
-
-
-#define IEEE_Config_M Fld(3,0) /* Mode select */
-#define IEEE_Config_D 0x04 /* FIFO access enable */
-#define IEEE_Config_B 0x08 /* 9-bit word enable */
-#define IEEE_Config_T 0x10 /* Data transfer enable */
-#define IEEE_Config_A 0x20 /* Data transfer direction */
-#define IEEE_Config_E 0x40 /* Timer enable */
-#define IEEE_Control_A 0x08 /* AutoFd output */
-#define IEEE_Control_E 0x04 /* Selectin output */
-#define IEEE_Control_T 0x02 /* Strobe output */
-#define IEEE_Control_I 0x01 /* Port init output */
-#define IEEE_Data_C (1<<31) /* Byte count */
-#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */
-#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */
-#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */
-#define IEEE_Status_A 0x0100 /* nAutoFd port output status */
-#define IEEE_Status_E 0x0080 /* nSelectIn port output status */
-#define IEEE_Status_T 0x0040 /* nStrobe port output status */
-#define IEEE_Status_I 0x0020 /* nInit port output status */
-#define IEEE_Status_B 0x0010 /* Busy port inout status */
-#define IEEE_Status_S 0x0008 /* Select port input status */
-#define IEEE_Status_K 0x0004 /* nAck port input status */
-#define IEEE_Status_F 0x0002 /* nFault port input status */
-#define IEEE_Status_R 0x0001 /* pError port input status */
-
-#define IEEE_IntStatus_IntReqDat 0x0100
-#define IEEE_IntStatus_IntReqEmp 0x0080
-#define IEEE_IntStatus_IntReqInt 0x0040
-#define IEEE_IntStatus_IntReqRav 0x0020
-#define IEEE_IntStatus_IntReqTim 0x0010
-#define IEEE_IntStatus_RevAddrComp 0x0008
-#define IEEE_IntStatus_RevDataComp 0x0004
-#define IEEE_IntStatus_FwdAddrComp 0x0002
-#define IEEE_IntStatus_FwdDataComp 0x0001
-#define IEEE_FifoLevels_RevFifoLevel 2
-#define IEEE_FifoLevels_FwdFifoLevel 1
-#define IEEE_InitTime_TimValInit Fld(22,0)
-#define IEEE_TimerStatus_TimValStat Fld(22,0)
-#define IEEE_ReloadValue_Reload Fld(4,0)
-
-#define IEEE_TestControl_RegClk 0x04
-#define IEEE_TestControl_ClockSelect Fld(2,1)
-#define IEEE_TestControl_TimerTestModeEn 0x01
-#define IEEE_TestCtrlIn_PError 0x10
-#define IEEE_TestCtrlIn_nFault 0x08
-#define IEEE_TestCtrlIn_nAck 0x04
-#define IEEE_TestCtrlIn_PSel 0x02
-#define IEEE_TestCtrlIn_Busy 0x01
-
-#endif /* LANGUAGE == C */
-
-/*
- * VGA Controller
- *
- * Registers
- * VideoControl Video Control Register
- * VgaTiming0 VGA Timing Register 0
- * VgaTiming1 VGA Timing Register 1
- * VgaTiming2 VGA Timing Register 2
- * VgaTiming3 VGA Timing Register 3
- * VgaBorder VGA Border Color Register
- * VgaDBAR VGADMA Base Address Register
- * VgaDCAR VGADMA Channel Current Address Register
- * VgaStatus VGA Status Register
- * VgaInterruptMask VGA Interrupt Mask Register
- * VgaPalette VGA Palette Registers
- * DacControl DAC Control Register
- * VgaTest VGA Controller Test Register
- */
-
-#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL )
-
-#define _VideoControl _VGA( 0x0000 )
-#define _VgaTiming0 _VGA( 0x0400 )
-#define _VgaTiming1 _VGA( 0x0800 )
-#define _VgaTiming2 _VGA( 0x0c00 )
-#define _VgaTiming3 _VGA( 0x1000 )
-#define _VgaBorder _VGA( 0x1400 )
-#define _VgaDBAR _VGA( 0x1800 )
-#define _VgaDCAR _VGA( 0x1c00 )
-#define _VgaStatus _VGA( 0x2000 )
-#define _VgaInterruptMask _VGA( 0x2400 )
-#define _VgaPalette _VGA( 0x40000 )
-#define _DacControl _VGA( 0x3000 )
-#define _VgaTest _VGA( 0x2c00 )
-
-#if (LANGUAGE == C)
-#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl)))
-#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
-#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
-#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
-#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
-#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder)))
-#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
-#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
-#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus)))
-#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
-#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette)))
-#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl)))
-#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest)))
-
-#define VideoControl_VgaEn 0x00000000
-#define VideoControl_BGR 0x00000001
-#define VideoControl_VCompVal Fld(2,2)
-#define VideoControl_VgaReq Fld(4,4)
-#define VideoControl_VBurstL Fld(4,8)
-#define VideoControl_VMode (1<<12)
-#define VideoControl_PalRead (1<<13)
-
-#define VgaTiming0_PPL Fld(6,2)
-#define VgaTiming0_HSW Fld(8,8)
-#define VgaTiming0_HFP Fld(8,16)
-#define VgaTiming0_HBP Fld(8,24)
-
-#define VgaTiming1_LPS Fld(10,0)
-#define VgaTiming1_VSW Fld(6,10)
-#define VgaTiming1_VFP Fld(8,16)
-#define VgaTiming1_VBP Fld(8,24)
-
-#define VgaTiming2_IVS 0x01
-#define VgaTiming2_IHS 0x02
-#define VgaTiming2_CVS 0x04
-#define VgaTiming2_CHS 0x08
-
-#define VgaTiming3_HBS Fld(8,0)
-#define VgaTiming3_HBE Fld(8,8)
-#define VgaTiming3_VBS Fld(8,16)
-#define VgaTiming3_VBE Fld(8,24)
-
-#define VgaBorder_BCOL Fld(24,0)
-
-#define VgaStatus_VFUF 0x01
-#define VgaStatus_VNext 0x02
-#define VgaStatus_VComp 0x04
-
-#define VgaInterruptMask_VFUFMask 0x00
-#define VgaInterruptMask_VNextMask 0x01
-#define VgaInterruptMask_VCompMask 0x02
-
-#define VgaPalette_R Fld(8,0)
-#define VgaPalette_G Fld(8,8)
-#define VgaPalette_B Fld(8,16)
-
-#define DacControl_DACON 0x0001
-#define DacControl_COMPON 0x0002
-#define DacControl_PEDON 0x0004
-#define DacControl_RTrim Fld(5,4)
-#define DacControl_GTrim Fld(5,9)
-#define DacControl_BTrim Fld(5,14)
-
-#define VgaTest_TDAC 0x00
-#define VgaTest_Datatest Fld(4,1)
-#define VgaTest_DACTESTDAC 0x10
-#define VgaTest_DACTESTOUT Fld(3,5)
-
-#endif /* LANGUAGE == C */
-
-/*
- * USB Host Interface Controller
- *
- * Registers
- * Revision
- * Control
- * CommandStatus
- * InterruptStatus
- * InterruptEnable
- * HCCA
- * PeriodCurrentED
- * ControlHeadED
- * BulkHeadED
- * BulkCurrentED
- * DoneHead
- * FmInterval
- * FmRemaining
- * FmNumber
- * PeriodicStart
- * LSThreshold
- * RhDescriptorA
- * RhDescriptorB
- * RhStatus
- * RhPortStatus
- * USBStatus
- * USBReset
- * USTAR
- * USWER
- * USRFR
- * USNFR
- * USTCSR
- * USSR
- *
- */
-
-#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL )
-
-
-#define _Revision _USB( 0x0000 )
-#define _Control _USB( 0x0888 )
-#define _CommandStatus _USB( 0x0c00 )
-#define _InterruptStatus _USB( 0x1000 )
-#define _InterruptEnable _USB( 0x1400 )
-#define _HCCA _USB( 0x1800 )
-#define _PeriodCurrentED _USB( 0x1c00 )
-#define _ControlHeadED _USB( 0x2000 )
-#define _BulkHeadED _USB( 0x2800 )
-#define _BulkCurrentED _USB( 0x2c00 )
-#define _DoneHead _USB( 0x3000 )
-#define _FmInterval _USB( 0x3400 )
-#define _FmRemaining _USB( 0x3800 )
-#define _FmNumber _USB( 0x3c00 )
-#define _PeriodicStart _USB( 0x4000 )
-#define _LSThreshold _USB( 0x4400 )
-#define _RhDescriptorA _USB( 0x4800 )
-#define _RhDescriptorB _USB( 0x4c00 )
-#define _RhStatus _USB( 0x5000 )
-#define _RhPortStatus _USB( 0x5400 )
-#define _USBStatus _USB( 0x11800 )
-#define _USBReset _USB( 0x11c00 )
-
-#define _USTAR _USB( 0x10400 )
-#define _USWER _USB( 0x10800 )
-#define _USRFR _USB( 0x10c00 )
-#define _USNFR _USB( 0x11000 )
-#define _USTCSR _USB( 0x11400 )
-#define _USSR _USB( 0x11800 )
-
-
-#if (LANGUAGE == C)
-
-#define Revision (*((volatile Word *) SA1101_p2v (_Revision)))
-#define Control (*((volatile Word *) SA1101_p2v (_Control)))
-#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus)))
-#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus)))
-#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable)))
-#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA)))
-#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
-#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED)))
-#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED)))
-#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
-#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead)))
-#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval)))
-#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining)))
-#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber)))
-#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart)))
-#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold)))
-#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
-#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
-#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus)))
-#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus)))
-#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus)))
-#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset)))
-#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR)))
-#define USWER (*((volatile Word *) SA1101_p2v (_USWER)))
-#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR)))
-#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR)))
-#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR)))
-#define USSR (*((volatile Word *) SA1101_p2v (_USSR)))
-
-
-#define USBStatus_IrqHciRmtWkp (1<<7)
-#define USBStatus_IrqHciBuffAcc (1<<8)
-#define USBStatus_nIrqHciM (1<<9)
-#define USBStatus_nHciMFClr (1<<10)
-
-#define USBReset_ForceIfReset 0x01
-#define USBReset_ForceHcReset 0x02
-#define USBReset_ClkGenReset 0x04
-
-#define USTCR_RdBstCntrl Fld(3,0)
-#define USTCR_ByteEnable Fld(4,3)
-#define USTCR_WriteEn (1<<7)
-#define USTCR_FifoCir (1<<8)
-#define USTCR_TestXferSel (1<<9)
-#define USTCR_FifoCirAtEnd (1<<10)
-#define USTCR_nSimScaleDownClk (1<<11)
-
-#define USSR_nAppMDEmpty 0x01
-#define USSR_nAppMDFirst 0x02
-#define USSR_nAppMDLast 0x04
-#define USSR_nAppMDFull 0x08
-#define USSR_nAppMAFull 0x10
-#define USSR_XferReq 0x20
-#define USSR_XferEnd 0x40
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * Interrupt Controller
- *
- * Registers
- * INTTEST0 Test register 0
- * INTTEST1 Test register 1
- * INTENABLE0 Interrupt Enable register 0
- * INTENABLE1 Interrupt Enable register 1
- * INTPOL0 Interrupt Polarity selection 0
- * INTPOL1 Interrupt Polarity selection 1
- * INTTSTSEL Interrupt source selection
- * INTSTATCLR0 Interrupt Status 0
- * INTSTATCLR1 Interrupt Status 1
- * INTSET0 Interrupt Set 0
- * INTSET1 Interrupt Set 1
- */
-
-#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL)
-
-#define _INTTEST0 _INT( 0x1000 )
-#define _INTTEST1 _INT( 0x1400 )
-#define _INTENABLE0 _INT( 0x2000 )
-#define _INTENABLE1 _INT( 0x2400 )
-#define _INTPOL0 _INT( 0x3000 )
-#define _INTPOL1 _INT( 0x3400 )
-#define _INTTSTSEL _INT( 0x5000 )
-#define _INTSTATCLR0 _INT( 0x6000 )
-#define _INTSTATCLR1 _INT( 0x6400 )
-#define _INTSET0 _INT( 0x7000 )
-#define _INTSET1 _INT( 0x7400 )
-
-#if ( LANGUAGE == C )
-#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0)))
-#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1)))
-#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0)))
-#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1)))
-#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0)))
-#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1)))
-#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
-#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
-#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
-#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0)))
-#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1)))
-
-#endif /* LANGUAGE == C */
-
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers (prefix kbd applies to trackpad interface, mse to mouse)
- * KBDCR Control Register
- * KBDSTAT Status Register
- * KBDDATA Transmit/Receive Data register
- * KBDCLKDIV Clock Division Register
- * KBDPRECNT Clock Precount Register
- * KBDTEST1 Test register 1
- * KBDTEST2 Test register 2
- * KBDTEST3 Test register 3
- * KBDTEST4 Test register 4
- * MSECR
- * MSESTAT
- * MSEDATA
- * MSECLKDIV
- * MSEPRECNT
- * MSETEST1
- * MSETEST2
- * MSETEST3
- * MSETEST4
- *
- */
-
-#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE )
-#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE )
-
-#define _KBDCR _KBD( 0x0000 )
-#define _KBDSTAT _KBD( 0x0400 )
-#define _KBDDATA _KBD( 0x0800 )
-#define _KBDCLKDIV _KBD( 0x0c00 )
-#define _KBDPRECNT _KBD( 0x1000 )
-#define _KBDTEST1 _KBD( 0x2000 )
-#define _KBDTEST2 _KBD( 0x2400 )
-#define _KBDTEST3 _KBD( 0x2800 )
-#define _KBDTEST4 _KBD( 0x2c00 )
-#define _MSECR _MSE( 0x0000 )
-#define _MSESTAT _MSE( 0x0400 )
-#define _MSEDATA _MSE( 0x0800 )
-#define _MSECLKDIV _MSE( 0x0c00 )
-#define _MSEPRECNT _MSE( 0x1000 )
-#define _MSETEST1 _MSE( 0x2000 )
-#define _MSETEST2 _MSE( 0x2400 )
-#define _MSETEST3 _MSE( 0x2800 )
-#define _MSETEST4 _MSE( 0x2c00 )
-
-#if ( LANGUAGE == C )
-
-#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR)))
-#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
-#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA)))
-#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
-#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
-#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
-#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
-#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
-#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
-#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR)))
-#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT)))
-#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA)))
-#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
-#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
-#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1)))
-#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2)))
-#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3)))
-#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4)))
-
-
-#define KBDCR_ENA 0x08
-#define KBDCR_FKD 0x02
-#define KBDCR_FKC 0x01
-
-#define KBDSTAT_TXE 0x80
-#define KBDSTAT_TXB 0x40
-#define KBDSTAT_RXF 0x20
-#define KBDSTAT_RXB 0x10
-#define KBDSTAT_ENA 0x08
-#define KBDSTAT_RXP 0x04
-#define KBDSTAT_KBD 0x02
-#define KBDSTAT_KBC 0x01
-
-#define KBDCLKDIV_DivVal Fld(4,0)
-
-#define MSECR_ENA 0x08
-#define MSECR_FKD 0x02
-#define MSECR_FKC 0x01
-
-#define MSESTAT_TXE 0x80
-#define MSESTAT_TXB 0x40
-#define MSESTAT_RXF 0x20
-#define MSESTAT_RXB 0x10
-#define MSESTAT_ENA 0x08
-#define MSESTAT_RXP 0x04
-#define MSESTAT_MSD 0x02
-#define MSESTAT_MSC 0x01
-
-#define MSECLKDIV_DivVal Fld(4,0)
-
-#define KBDTEST1_CD 0x80
-#define KBDTEST1_RC1 0x40
-#define KBDTEST1_MC 0x20
-#define KBDTEST1_C Fld(2,3)
-#define KBDTEST1_T2 0x40
-#define KBDTEST1_T1 0x20
-#define KBDTEST1_T0 0x10
-#define KBDTEST2_TICBnRES 0x08
-#define KBDTEST2_RKC 0x04
-#define KBDTEST2_RKD 0x02
-#define KBDTEST2_SEL 0x01
-#define KBDTEST3_ms_16 0x80
-#define KBDTEST3_us_64 0x40
-#define KBDTEST3_us_16 0x20
-#define KBDTEST3_DIV8 0x10
-#define KBDTEST3_DIn 0x08
-#define KBDTEST3_CIn 0x04
-#define KBDTEST3_KD 0x02
-#define KBDTEST3_KC 0x01
-#define KBDTEST4_BC12 0x80
-#define KBDTEST4_BC11 0x40
-#define KBDTEST4_TRES 0x20
-#define KBDTEST4_CLKOE 0x10
-#define KBDTEST4_CRES 0x08
-#define KBDTEST4_RXB 0x04
-#define KBDTEST4_TXB 0x02
-#define KBDTEST4_SRX 0x01
-
-#define MSETEST1_CD 0x80
-#define MSETEST1_RC1 0x40
-#define MSETEST1_MC 0x20
-#define MSETEST1_C Fld(2,3)
-#define MSETEST1_T2 0x40
-#define MSETEST1_T1 0x20
-#define MSETEST1_T0 0x10
-#define MSETEST2_TICBnRES 0x08
-#define MSETEST2_RKC 0x04
-#define MSETEST2_RKD 0x02
-#define MSETEST2_SEL 0x01
-#define MSETEST3_ms_16 0x80
-#define MSETEST3_us_64 0x40
-#define MSETEST3_us_16 0x20
-#define MSETEST3_DIV8 0x10
-#define MSETEST3_DIn 0x08
-#define MSETEST3_CIn 0x04
-#define MSETEST3_KD 0x02
-#define MSETEST3_KC 0x01
-#define MSETEST4_BC12 0x80
-#define MSETEST4_BC11 0x40
-#define MSETEST4_TRES 0x20
-#define MSETEST4_CLKOE 0x10
-#define MSETEST4_CRES 0x08
-#define MSETEST4_RXB 0x04
-#define MSETEST4_TXB 0x02
-#define MSETEST4_SRX 0x01
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- * PADWR Port A Data Write Register
- * PBDWR Port B Data Write Register
- * PADRR Port A Data Read Register
- * PBDRR Port B Data Read Register
- * PADDR Port A Data Direction Register
- * PBDDR Port B Data Direction Register
- * PASSR Port A Sleep State Register
- * PBSSR Port B Sleep State Register
- *
- */
-
-#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE )
-
-#define _PADWR _PIO( 0x0000 )
-#define _PBDWR _PIO( 0x0400 )
-#define _PADRR _PIO( 0x0000 )
-#define _PBDRR _PIO( 0x0400 )
-#define _PADDR _PIO( 0x0800 )
-#define _PBDDR _PIO( 0x0c00 )
-#define _PASSR _PIO( 0x1000 )
-#define _PBSSR _PIO( 0x1400 )
-
-
-#if ( LANGUAGE == C )
-
-
-#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR)))
-#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR)))
-#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR)))
-#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR)))
-#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR)))
-#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR)))
-#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR)))
-#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR)))
-
-#endif
-
-
-
-/*
- * Keypad Interface
- *
- * Registers
- * PXDWR
- * PXDRR
- * PYDWR
- * PYDRR
- *
- */
-
-#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE )
-
-#define _PXDWR _KEYPAD( 0x0000 )
-#define _PXDRR _KEYPAD( 0x0000 )
-#define _PYDWR _KEYPAD( 0x0400 )
-#define _PYDRR _KEYPAD( 0x0400 )
-
-#if ( LANGUAGE == C )
-
-
-#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR)))
-#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR)))
-#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR)))
-#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR)))
-
-#endif
-
-
-
-/*
- * PCMCIA Interface
- *
- * Registers
- * PCSR Status Register
- * PCCR Control Register
- * PCSSR Sleep State Register
- *
- */
-
-#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE )
-
-#define _PCSR _CARD( 0x0000 )
-#define _PCCR _CARD( 0x0400 )
-#define _PCSSR _CARD( 0x0800 )
-
-#if ( LANGUAGE == C )
-#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR)))
-#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR)))
-#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR)))
-
-#define PCSR_S0_ready 0x0001
-#define PCSR_S1_ready 0x0002
-#define PCSR_S0_detected 0x0004
-#define PCSR_S1_detected 0x0008
-#define PCSR_S0_VS1 0x0010
-#define PCSR_S0_VS2 0x0020
-#define PCSR_S1_VS1 0x0040
-#define PCSR_S1_VS2 0x0080
-#define PCSR_S0_WP 0x0100
-#define PCSR_S1_WP 0x0200
-#define PCSR_S0_BVD1_nSTSCHG 0x0400
-#define PCSR_S0_BVD2_nSPKR 0x0800
-#define PCSR_S1_BVD1_nSTSCHG 0x1000
-#define PCSR_S1_BVD2_nSPKR 0x2000
-
-#define PCCR_S0_VPP0 0x0001
-#define PCCR_S0_VPP1 0x0002
-#define PCCR_S0_VCC0 0x0004
-#define PCCR_S0_VCC1 0x0008
-#define PCCR_S1_VPP0 0x0010
-#define PCCR_S1_VPP1 0x0020
-#define PCCR_S1_VCC0 0x0040
-#define PCCR_S1_VCC1 0x0080
-#define PCCR_S0_reset 0x0100
-#define PCCR_S1_reset 0x0200
-#define PCCR_S0_float 0x0400
-#define PCCR_S1_float 0x0800
-
-#define PCSSR_S0_VCC0 0x0001
-#define PCSSR_S0_VCC1 0x0002
-#define PCSSR_S0_VPP0 0x0004
-#define PCSSR_S0_VPP1 0x0008
-#define PCSSR_S0_control 0x0010
-#define PCSSR_S1_VCC0 0x0020
-#define PCSSR_S1_VCC1 0x0040
-#define PCSSR_S1_VPP0 0x0080
-#define PCSSR_S1_VPP1 0x0100
-#define PCSSR_S1_control 0x0200
-
-#endif
-
-#undef C
-#undef Assembly
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index 99f5856..ee5d2bb 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -72,8 +72,4 @@ static inline unsigned long get_clock_tick_rate(void)
#include "SA-1100.h"
-#ifdef CONFIG_SA1101
-#include "SA-1101.h"
-#endif
-
#endif /* _ASM_ARCH_HARDWARE_H */
--
1.7.0.4
On Wed, 30 Jun 2010, Christoph Egger wrote:
> SA1101 doesn't exist in Kconfig, therefore removing all
> references for it from the source code.
>
> Signed-off-by: Christoph Egger <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
> ---
> arch/arm/mach-sa1100/include/mach/SA-1101.h | 925 --------------------------
> arch/arm/mach-sa1100/include/mach/hardware.h | 4 -
> 2 files changed, 0 insertions(+), 929 deletions(-)
> delete mode 100644 arch/arm/mach-sa1100/include/mach/SA-1101.h
>
[...]
Nicolas
Dne St 30. června 2010 18:57:43 Nicolas Pitre napsal(a):
> On Wed, 30 Jun 2010, Christoph Egger wrote:
> > SA1101 doesn't exist in Kconfig, therefore removing all
> > references for it from the source code.
> >
> > Signed-off-by: Christoph Egger <[email protected]>
>
> Acked-by: Nicolas Pitre <[email protected]>
You're dropping support for a whole CPU here ... is the code redundant or
something ?
>
> > ---
> >
> > arch/arm/mach-sa1100/include/mach/SA-1101.h | 925
> > -------------------------- arch/arm/mach-sa1100/include/mach/hardware.h
> > | 4 -
> > 2 files changed, 0 insertions(+), 929 deletions(-)
> > delete mode 100644 arch/arm/mach-sa1100/include/mach/SA-1101.h
>
> [...]
>
>
> Nicolas
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Wed, 30 Jun 2010, Marek Vasut wrote:
> Dne St 30. června 2010 18:57:43 Nicolas Pitre napsal(a):
> > On Wed, 30 Jun 2010, Christoph Egger wrote:
> > > SA1101 doesn't exist in Kconfig, therefore removing all
> > > references for it from the source code.
> > >
> > > Signed-off-by: Christoph Egger <[email protected]>
> >
> > Acked-by: Nicolas Pitre <[email protected]>
>
> You're dropping support for a whole CPU here ... is the code redundant or
> something ?
The SA1101 is not a CPU. It is a companion chipset for the SA1100. And
so far we have no target using it in the tree, and that isn't likely to
change more than 10 years after the chip availability. Needless to say
that the SA1101 has long been unavailable either.
We also have support for the SA1111 which is a similar companion chipset
for the SA1110. This is not going away as at least the Neponset
expansion board for the Assabet development board is using a SA1111.
Nicolas
Dne St 30. června 2010 20:59:05 Nicolas Pitre napsal(a):
> On Wed, 30 Jun 2010, Marek Vasut wrote:
> > Dne St 30. června 2010 18:57:43 Nicolas Pitre napsal(a):
> > > On Wed, 30 Jun 2010, Christoph Egger wrote:
> > > > SA1101 doesn't exist in Kconfig, therefore removing all
> > > > references for it from the source code.
> > > >
> > > > Signed-off-by: Christoph Egger <[email protected]>
> > >
> > > Acked-by: Nicolas Pitre <[email protected]>
> >
> > You're dropping support for a whole CPU here ... is the code redundant or
> > something ?
>
> The SA1101 is not a CPU. It is a companion chipset for the SA1100. And
> so far we have no target using it in the tree, and that isn't likely to
> change more than 10 years after the chip availability. Needless to say
> that the SA1101 has long been unavailable either.
>
> We also have support for the SA1111 which is a similar companion chipset
> for the SA1110. This is not going away as at least the Neponset
> expansion board for the Assabet development board is using a SA1111.
>
>
> Nicolas
Oh I see. Thanks for clearing that.