Add the support of the Startek KD070FHFID015 panel.
It's a 7-inch TFT LCD display with a resolution of 1024 x 600 pixels.
This serie come from a bigger one [1]. Then I addressed the previous
comments for the related commits here.
[1]: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Alexandre Mergnat <[email protected]>
---
Changes in v2:
- Replace "dcdc-gpio" by "enable-gpio" because this pin enable the
Power IC supply. Also, this property come from panel-common.
- Remove height-mm and width-mm since they are useless here.
- Re-order elements in the stk_panel structure for readability.
- Link to v1: https://lore.kernel.org/r/[email protected]
Changes in v1:
- Fix typos in the driver.
- Merge 2 regulators in one bulk variable in the driver.
- Remove backlight enable/disable from the driver because it's already
managed by the backlight core.
- Move hardcoded values from function to the generic structure in the
driver.
- Remove unnecessary function (stk_panel_del).
- Replace some functions by macro to increase the readability.
- Link to parent serie: [1]
---
Alexandre Mergnat (2):
dt-bindings: display: panel: add startek kd070fhfid015 support
arm64: defconfig: enable STARTEK KD070FHFID015 panel
Guillaume La Roque (1):
drm/panel: Support for startek-kd070fhfid015 MIPI-DSI panel
.../display/panel/startek,kd070fhfid015.yaml | 69 ++++
arch/arm64/configs/defconfig | 1 +
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-startek-kd070fhfid015.c | 431 +++++++++++++++++++++
5 files changed, 513 insertions(+)
---
base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5
change-id: 20230711-startek_display-958d265f6baa
Best regards,
--
Alexandre Mergnat <[email protected]>
From: Guillaume La Roque <[email protected]>
This driver support the Startek KD070FHFID015, which is a 7-inch TFT LCD
display using MIPI DSI interface.
Signed-off-by: Guillaume La Roque <[email protected]>
Signed-off-by: Alexandre Mergnat <[email protected]>
---
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-startek-kd070fhfid015.c | 431 +++++++++++++++++++++
3 files changed, 443 insertions(+)
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 203c0ef0bbfd..c45e877c22c1 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -733,6 +733,17 @@ config DRM_PANEL_SONY_TULIP_TRULY_NT35521
NT35521 1280x720 video mode panel as found on Sony Xperia M4
Aqua phone.
+config DRM_PANEL_STARTEK_KD070FHFID015
+ tristate "STARTEK KD070FHFID015 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
+ based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
+ with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
+ the host, a built-in LED backlight and touch controller.
+
config DRM_PANEL_TDO_TL070WSH30
tristate "TDO TL070WSH30 DSI panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 30cf553c8d1d..f8b362091ce7 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
+obj-$(CONFIG_DRM_PANEL_STARTEK_KD070FHFID015) += panel-startek-kd070fhfid015.o
obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
diff --git a/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c b/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c
new file mode 100644
index 000000000000..a25dfbdf8d9d
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 InforceComputing
+ * Copyright (C) 2016 Linaro Ltd
+ * Copyright (C) 2023 BayLibre, SAS
+ *
+ * Authors:
+ * - Vinay Simha BN <[email protected]>
+ * - Sumit Semwal <[email protected]>
+ * - Guillaume La Roque <[email protected]>
+ *
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define DSI_REG_MCAP 0xB0
+#define DSI_REG_IS 0xB3 /* Interface Setting */
+#define DSI_REG_IIS 0xB4 /* Interface ID Setting */
+#define DSI_REG_CTRL 0xB6
+
+enum {
+ IOVCC = 0,
+ POWER = 1
+};
+
+
+struct stk_panel {
+ bool prepared;
+ const struct drm_display_mode *mode;
+ struct backlight_device *backlight;
+ struct drm_panel base;
+ struct gpio_desc *enable_gpio; /* Power IC supply enable */
+ struct gpio_desc *reset_gpio; /* External reset */
+ struct mipi_dsi_device *dsi;
+ struct regulator_bulk_data supplies[2];
+};
+
+static inline struct stk_panel *to_stk_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct stk_panel, base);
+}
+
+static int stk_panel_init(struct stk_panel *stk)
+{
+ struct mipi_dsi_device *dsi = stk->dsi;
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ ret = mipi_dsi_dcs_soft_reset(dsi);
+ if (ret < 0) {
+ dev_err(dev, "failed to mipi_dsi_dcs_soft_reset: %d\n", ret);
+ return ret;
+ }
+ mdelay(5);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "failed to set exit sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(120);
+
+ mipi_dsi_generic_write_seq(dsi, DSI_REG_MCAP, 0x04);
+
+ /* Interface setting, video mode */
+ mipi_dsi_generic_write_seq(dsi, DSI_REG_IS, 0x14, 0x08, 0x00, 0x22, 0x00);
+ mipi_dsi_generic_write_seq(dsi, DSI_REG_IIS, 0x0C, 0x00);
+ mipi_dsi_generic_write_seq(dsi, DSI_REG_CTRL, 0x3A, 0xD3);
+
+ ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x77);
+ if (ret < 0) {
+ dev_err(dev, "failed to write display brightness: %d\n", ret);
+ return ret;
+ }
+
+ mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+ MIPI_DCS_WRITE_MEMORY_START);
+
+ ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
+ if (ret < 0) {
+ dev_err(dev, "failed to set pixel format: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_set_column_address(dsi, 0, stk->mode->hdisplay - 1);
+ if (ret < 0) {
+ dev_err(dev, "failed to set column address: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_set_page_address(dsi, 0, stk->mode->vdisplay - 1);
+ if (ret < 0) {
+ dev_err(dev, "failed to set page address: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int stk_panel_on(struct stk_panel *stk)
+{
+ struct mipi_dsi_device *dsi = stk->dsi;
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0)
+ dev_err(dev, "failed to set display on: %d\n", ret);
+
+ mdelay(20);
+
+ return ret;
+}
+
+static void stk_panel_off(struct stk_panel *stk)
+{
+ struct mipi_dsi_device *dsi = stk->dsi;
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0)
+ dev_err(dev, "failed to set display off: %d\n", ret);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0)
+ dev_err(dev, "failed to enter sleep mode: %d\n", ret);
+
+ msleep(100);
+}
+
+static int stk_panel_disable(struct drm_panel *panel)
+{
+ return 0;
+}
+
+static int stk_panel_unprepare(struct drm_panel *panel)
+{
+ struct stk_panel *stk = to_stk_panel(panel);
+
+ if (!stk->prepared)
+ return 0;
+
+ stk_panel_off(stk);
+ regulator_bulk_disable(ARRAY_SIZE(stk->supplies), stk->supplies);
+ gpiod_set_value(stk->reset_gpio, 0);
+ gpiod_set_value(stk->enable_gpio, 1);
+
+ stk->prepared = false;
+
+ return 0;
+}
+
+static int stk_panel_prepare(struct drm_panel *panel)
+{
+ struct stk_panel *stk = to_stk_panel(panel);
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ if (stk->prepared)
+ return 0;
+
+ gpiod_set_value(stk->reset_gpio, 0);
+ gpiod_set_value(stk->enable_gpio, 0);
+ ret = regulator_enable(stk->supplies[IOVCC].consumer);
+ if (ret < 0)
+ return ret;
+
+ mdelay(8);
+ ret = regulator_enable(stk->supplies[POWER].consumer);
+ if (ret < 0)
+ goto iovccoff;
+
+ mdelay(20);
+ gpiod_set_value(stk->enable_gpio, 1);
+ mdelay(20);
+ gpiod_set_value(stk->reset_gpio, 1);
+ mdelay(10);
+ ret = stk_panel_init(stk);
+ if (ret < 0) {
+ dev_err(dev, "failed to init panel: %d\n", ret);
+ goto poweroff;
+ }
+
+ ret = stk_panel_on(stk);
+ if (ret < 0) {
+ dev_err(dev, "failed to set panel on: %d\n", ret);
+ goto poweroff;
+ }
+
+ stk->prepared = true;
+
+ return 0;
+
+poweroff:
+ regulator_disable(stk->supplies[POWER].consumer);
+iovccoff:
+ regulator_disable(stk->supplies[IOVCC].consumer);
+ gpiod_set_value(stk->reset_gpio, 0);
+ gpiod_set_value(stk->enable_gpio, 0);
+
+ return ret;
+}
+
+static int stk_panel_enable(struct drm_panel *panel)
+{
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .clock = 163204,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 144,
+ .hsync_end = 1200 + 144 + 16,
+ .htotal = 1200 + 144 + 16 + 45,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 8,
+ .vsync_end = 1920 + 8 + 4,
+ .vtotal = 1920 + 8 + 4 + 4,
+ .width_mm = 95,
+ .height_mm = 151,
+};
+
+static int stk_panel_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &default_mode);
+ if (!mode) {
+ dev_err(panel->dev, "failed to add mode %ux%ux@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ connector->display_info.width_mm = default_mode.width_mm;
+ connector->display_info.height_mm = default_mode.height_mm;
+ return 1;
+}
+
+static int dsi_dcs_bl_get_brightness(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ int ret;
+ u16 brightness = bl->props.brightness;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+ ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
+ if (ret < 0)
+ return ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+ return brightness & 0xff;
+}
+
+static int dsi_dcs_bl_update_status(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+ ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness);
+ if (ret < 0) {
+ dev_err(dev, "failed to set DSI control: %d\n", ret);
+ return ret;
+ }
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+ return 0;
+}
+
+static const struct backlight_ops dsi_bl_ops = {
+ .update_status = dsi_dcs_bl_update_status,
+ .get_brightness = dsi_dcs_bl_get_brightness,
+};
+
+static struct backlight_device *
+drm_panel_create_dsi_backlight(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ .brightness = 255,
+ .max_brightness = 255,
+ };
+
+ return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+ &dsi_bl_ops, &props);
+}
+
+static const struct drm_panel_funcs stk_panel_funcs = {
+ .disable = stk_panel_disable,
+ .unprepare = stk_panel_unprepare,
+ .prepare = stk_panel_prepare,
+ .enable = stk_panel_enable,
+ .get_modes = stk_panel_get_modes,
+};
+
+static const struct of_device_id stk_of_match[] = {
+ { .compatible = "startek,kd070fhfid015", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, stk_of_match);
+
+static int stk_panel_add(struct stk_panel *stk)
+{
+ struct device *dev = &stk->dsi->dev;
+ int ret;
+
+ stk->mode = &default_mode;
+
+ stk->supplies[IOVCC].supply = "iovcc";
+ stk->supplies[POWER].supply = "power";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(stk->supplies), stk->supplies);
+ if (ret) {
+ dev_err(dev, "regulator_bulk failed\n");
+ return ret;
+ }
+
+ stk->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(stk->reset_gpio)) {
+ ret = PTR_ERR(stk->reset_gpio);
+ dev_err(dev, "cannot get reset-gpios %d\n", ret);
+ return ret;
+ }
+
+ stk->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(stk->enable_gpio)) {
+ ret = PTR_ERR(stk->enable_gpio);
+ dev_err(dev, "cannot get enable-gpio %d\n", ret);
+ return ret;
+ }
+
+ stk->backlight = drm_panel_create_dsi_backlight(stk->dsi);
+ if (IS_ERR(stk->backlight)) {
+ ret = PTR_ERR(stk->backlight);
+ dev_err(dev, "failed to register backlight %d\n", ret);
+ return ret;
+ }
+
+ drm_panel_init(&stk->base, &stk->dsi->dev, &stk_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ drm_panel_add(&stk->base);
+
+ return 0;
+}
+
+static int stk_panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct stk_panel *stk;
+ int ret;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM);
+
+ stk = devm_kzalloc(&dsi->dev, sizeof(*stk), GFP_KERNEL);
+ if (!stk)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, stk);
+
+ stk->dsi = dsi;
+
+ ret = stk_panel_add(stk);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0)
+ drm_panel_remove(&stk->base);
+
+ return 0;
+}
+
+static void stk_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct stk_panel *stk = mipi_dsi_get_drvdata(dsi);
+ int err;
+
+ err = stk_panel_disable(&stk->base);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
+
+ err = mipi_dsi_detach(dsi);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n",
+ err);
+
+ drm_panel_remove(&stk->base);
+}
+
+static void stk_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct stk_panel *stk = mipi_dsi_get_drvdata(dsi);
+
+ stk_panel_disable(&stk->base);
+}
+
+static struct mipi_dsi_driver stk_panel_driver = {
+ .driver = {
+ .name = "panel-startek-kd070fhfid015",
+ .of_match_table = stk_of_match,
+ },
+ .probe = stk_panel_probe,
+ .remove = stk_panel_remove,
+ .shutdown = stk_panel_shutdown,
+};
+module_mipi_dsi_driver(stk_panel_driver);
+
+MODULE_AUTHOR("Guillaume La Roque <[email protected]>");
+MODULE_DESCRIPTION("STARTEK KD070FHFID015");
+MODULE_LICENSE("GPL");
--
2.25.1
The Startek KD070FHFID015 is a 7-inch TFT LCD display with a resolution
of 1024 x 600 pixels.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Alexandre Mergnat <[email protected]>
---
.../display/panel/startek,kd070fhfid015.yaml | 69 ++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml
new file mode 100644
index 000000000000..d817f998cddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,kd070fhfid015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. kd070fhfid015 7 inch TFT LCD panel
+
+maintainers:
+ - Alexandre Mergnat <[email protected]>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: startek,kd070fhfid015
+
+ enable-gpios: true
+
+ iovcc-supply:
+ description: Reference to the regulator powering the panel IO pins.
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ reset-gpios: true
+
+ port: true
+
+ power-supply: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - enable-gpios
+ - iovcc-supply
+ - reg
+ - reset-gpios
+ - port
+ - power-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "startek,kd070fhfid015";
+ reg = <0>;
+ enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+ iovcc-supply = <&mt6357_vsim1_reg>;
+ power-supply = <&vsys_lcm_reg>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
--
2.25.1
Build Startek KD070FHFID015 panel driver. This MIPI-DSI display
can be used for the mt8365-evk board for example.
Signed-off-by: Alexandre Mergnat <[email protected]>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 0777bcae9104..cb24a3d1219b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -816,6 +816,7 @@ CONFIG_DRM_PANEL_EDP=m
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
CONFIG_DRM_PANEL_SITRONIX_ST7703=m
+CONFIG_DRM_PANEL_STARTEK_KD070FHFID015=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
CONFIG_DRM_PANEL_VISIONOX_VTDR6130=m
CONFIG_DRM_LONTIUM_LT8912B=m
--
2.25.1
Hi,
On 13/07/2023 11:07, [email protected] wrote:
> From: Guillaume La Roque <[email protected]>
>
> This driver support the Startek KD070FHFID015, which is a 7-inch TFT LCD
> display using MIPI DSI interface.
>
> Signed-off-by: Guillaume La Roque <[email protected]>
> Signed-off-by: Alexandre Mergnat <[email protected]>
> ---
> drivers/gpu/drm/panel/Kconfig | 11 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-startek-kd070fhfid015.c | 431 +++++++++++++++++++++
> 3 files changed, 443 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 203c0ef0bbfd..c45e877c22c1 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -733,6 +733,17 @@ config DRM_PANEL_SONY_TULIP_TRULY_NT35521
> NT35521 1280x720 video mode panel as found on Sony Xperia M4
> Aqua phone.
>
> +config DRM_PANEL_STARTEK_KD070FHFID015
> + tristate "STARTEK KD070FHFID015 panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
> + based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
> + with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
> + the host, a built-in LED backlight and touch controller.
> +
> config DRM_PANEL_TDO_TL070WSH30
> tristate "TDO TL070WSH30 DSI panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 30cf553c8d1d..f8b362091ce7 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -74,6 +74,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
> obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
> +obj-$(CONFIG_DRM_PANEL_STARTEK_KD070FHFID015) += panel-startek-kd070fhfid015.o
> obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
> diff --git a/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c b/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c
> new file mode 100644
> index 000000000000..a25dfbdf8d9d
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c
> @@ -0,0 +1,431 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2016 InforceComputing
> + * Copyright (C) 2016 Linaro Ltd
> + * Copyright (C) 2023 BayLibre, SAS
> + *
> + * Authors:
> + * - Vinay Simha BN <[email protected]>
> + * - Sumit Semwal <[email protected]>
> + * - Guillaume La Roque <[email protected]>
> + *
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#define DSI_REG_MCAP 0xB0
> +#define DSI_REG_IS 0xB3 /* Interface Setting */
> +#define DSI_REG_IIS 0xB4 /* Interface ID Setting */
> +#define DSI_REG_CTRL 0xB6
> +
> +enum {
> + IOVCC = 0,
> + POWER = 1
> +};
> +
> +
Spurious empty line
> +struct stk_panel {
> + bool prepared;
> + const struct drm_display_mode *mode;
> + struct backlight_device *backlight;
> + struct drm_panel base;
> + struct gpio_desc *enable_gpio; /* Power IC supply enable */
> + struct gpio_desc *reset_gpio; /* External reset */
> + struct mipi_dsi_device *dsi;
> + struct regulator_bulk_data supplies[2];
> +};
> +
> +static inline struct stk_panel *to_stk_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct stk_panel, base);
> +}
> +
> +static int stk_panel_init(struct stk_panel *stk)
> +{
> + struct mipi_dsi_device *dsi = stk->dsi;
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + ret = mipi_dsi_dcs_soft_reset(dsi);
> + if (ret < 0) {
> + dev_err(dev, "failed to mipi_dsi_dcs_soft_reset: %d\n", ret);
> + return ret;
> + }
> + mdelay(5);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "failed to set exit sleep mode: %d\n", ret);
> + return ret;
> + }
> + msleep(120);
> +
> + mipi_dsi_generic_write_seq(dsi, DSI_REG_MCAP, 0x04);
> +
> + /* Interface setting, video mode */
> + mipi_dsi_generic_write_seq(dsi, DSI_REG_IS, 0x14, 0x08, 0x00, 0x22, 0x00);
> + mipi_dsi_generic_write_seq(dsi, DSI_REG_IIS, 0x0C, 0x00);
> + mipi_dsi_generic_write_seq(dsi, DSI_REG_CTRL, 0x3A, 0xD3);
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x77);
> + if (ret < 0) {
> + dev_err(dev, "failed to write display brightness: %d\n", ret);
> + return ret;
> + }
> +
> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
> + MIPI_DCS_WRITE_MEMORY_START);
> +
> + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
> + if (ret < 0) {
> + dev_err(dev, "failed to set pixel format: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_column_address(dsi, 0, stk->mode->hdisplay - 1);
> + if (ret < 0) {
> + dev_err(dev, "failed to set column address: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_page_address(dsi, 0, stk->mode->vdisplay - 1);
> + if (ret < 0) {
> + dev_err(dev, "failed to set page address: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int stk_panel_on(struct stk_panel *stk)
> +{
> + struct mipi_dsi_device *dsi = stk->dsi;
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0)
> + dev_err(dev, "failed to set display on: %d\n", ret);
> +
> + mdelay(20);
> +
> + return ret;
> +}
> +
> +static void stk_panel_off(struct stk_panel *stk)
> +{
> + struct mipi_dsi_device *dsi = stk->dsi;
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0)
> + dev_err(dev, "failed to set display off: %d\n", ret);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0)
> + dev_err(dev, "failed to enter sleep mode: %d\n", ret);
> +
> + msleep(100);
> +}
> +
> +static int stk_panel_disable(struct drm_panel *panel)
> +{
> + return 0;
> +}
You can totally drop those enable/disable ops.
> +
> +static int stk_panel_unprepare(struct drm_panel *panel)
> +{
> + struct stk_panel *stk = to_stk_panel(panel);
> +
> + if (!stk->prepared)
> + return 0;
> +
> + stk_panel_off(stk);
> + regulator_bulk_disable(ARRAY_SIZE(stk->supplies), stk->supplies);
> + gpiod_set_value(stk->reset_gpio, 0);
> + gpiod_set_value(stk->enable_gpio, 1);
> +
> + stk->prepared = false;
> +
> + return 0;
> +}
> +
> +static int stk_panel_prepare(struct drm_panel *panel)
> +{
> + struct stk_panel *stk = to_stk_panel(panel);
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + if (stk->prepared)
> + return 0;
> +
> + gpiod_set_value(stk->reset_gpio, 0);
> + gpiod_set_value(stk->enable_gpio, 0);
> + ret = regulator_enable(stk->supplies[IOVCC].consumer);
> + if (ret < 0)
> + return ret;
> +
> + mdelay(8);
> + ret = regulator_enable(stk->supplies[POWER].consumer);
> + if (ret < 0)
> + goto iovccoff;
> +
> + mdelay(20);
> + gpiod_set_value(stk->enable_gpio, 1);
> + mdelay(20);
> + gpiod_set_value(stk->reset_gpio, 1);
> + mdelay(10);
> + ret = stk_panel_init(stk);
> + if (ret < 0) {
> + dev_err(dev, "failed to init panel: %d\n", ret);
> + goto poweroff;
> + }
> +
> + ret = stk_panel_on(stk);
> + if (ret < 0) {
> + dev_err(dev, "failed to set panel on: %d\n", ret);
> + goto poweroff;
> + }
> +
> + stk->prepared = true;
> +
> + return 0;
> +
> +poweroff:
> + regulator_disable(stk->supplies[POWER].consumer);
> +iovccoff:
> + regulator_disable(stk->supplies[IOVCC].consumer);
> + gpiod_set_value(stk->reset_gpio, 0);
> + gpiod_set_value(stk->enable_gpio, 0);
> +
> + return ret;
> +}
> +
> +static int stk_panel_enable(struct drm_panel *panel)
> +{
> + return 0;
> +}
> +
> +static const struct drm_display_mode default_mode = {
> + .clock = 163204,
> + .hdisplay = 1200,
> + .hsync_start = 1200 + 144,
> + .hsync_end = 1200 + 144 + 16,
> + .htotal = 1200 + 144 + 16 + 45,
> + .vdisplay = 1920,
> + .vsync_start = 1920 + 8,
> + .vsync_end = 1920 + 8 + 4,
> + .vtotal = 1920 + 8 + 4 + 4,
> + .width_mm = 95,
> + .height_mm = 151,
> +};
> +
> +static int stk_panel_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, &default_mode);
> + if (!mode) {
> + dev_err(panel->dev, "failed to add mode %ux%ux@%u\n",
> + default_mode.hdisplay, default_mode.vdisplay,
> + drm_mode_vrefresh(&default_mode));
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> + drm_mode_probed_add(connector, mode);
> + connector->display_info.width_mm = default_mode.width_mm;
> + connector->display_info.height_mm = default_mode.height_mm;
> + return 1;
> +}
> +
> +static int dsi_dcs_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + int ret;
> + u16 brightness = bl->props.brightness;
Why that ? you'll overwrite the value right after, leave brightness uninitialized.
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> + return brightness & 0xff;
> +}
> +
> +static int dsi_dcs_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness);
> + if (ret < 0) {
> + dev_err(dev, "failed to set DSI control: %d\n", ret);
> + return ret;
> + }
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> + return 0;
> +}
> +
> +static const struct backlight_ops dsi_bl_ops = {
> + .update_status = dsi_dcs_bl_update_status,
> + .get_brightness = dsi_dcs_bl_get_brightness,
> +};
> +
> +static struct backlight_device *
> +drm_panel_create_dsi_backlight(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct backlight_properties props = {
> + .type = BACKLIGHT_RAW,
> + .brightness = 255,
> + .max_brightness = 255,
> + };
> +
> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> + &dsi_bl_ops, &props);
> +}
> +
> +static const struct drm_panel_funcs stk_panel_funcs = {
> + .disable = stk_panel_disable,
> + .unprepare = stk_panel_unprepare,
> + .prepare = stk_panel_prepare,
> + .enable = stk_panel_enable,
> + .get_modes = stk_panel_get_modes,
> +};
> +
> +static const struct of_device_id stk_of_match[] = {
> + { .compatible = "startek,kd070fhfid015", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, stk_of_match);
> +
> +static int stk_panel_add(struct stk_panel *stk)
> +{
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + stk->mode = &default_mode;
> +
> + stk->supplies[IOVCC].supply = "iovcc";
> + stk->supplies[POWER].supply = "power";
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(stk->supplies), stk->supplies);
> + if (ret) {
> + dev_err(dev, "regulator_bulk failed\n");
> + return ret;
> + }
> +
> + stk->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(stk->reset_gpio)) {
> + ret = PTR_ERR(stk->reset_gpio);
> + dev_err(dev, "cannot get reset-gpios %d\n", ret);
> + return ret;
> + }
> +
> + stk->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(stk->enable_gpio)) {
> + ret = PTR_ERR(stk->enable_gpio);
> + dev_err(dev, "cannot get enable-gpio %d\n", ret);
> + return ret;
> + }
> +
> + stk->backlight = drm_panel_create_dsi_backlight(stk->dsi);
> + if (IS_ERR(stk->backlight)) {
> + ret = PTR_ERR(stk->backlight);
> + dev_err(dev, "failed to register backlight %d\n", ret);
> + return ret;
> + }
> +
> + drm_panel_init(&stk->base, &stk->dsi->dev, &stk_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + drm_panel_add(&stk->base);
> +
> + return 0;
> +}
> +
> +static int stk_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct stk_panel *stk;
> + int ret;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM);
> +
> + stk = devm_kzalloc(&dsi->dev, sizeof(*stk), GFP_KERNEL);
> + if (!stk)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, stk);
> +
> + stk->dsi = dsi;
> +
> + ret = stk_panel_add(stk);
> + if (ret < 0)
> + return ret;
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0)
> + drm_panel_remove(&stk->base);
> +
> + return 0;
> +}
> +
> +static void stk_panel_remove(struct mipi_dsi_device *dsi)
> +{
> + struct stk_panel *stk = mipi_dsi_get_drvdata(dsi);
> + int err;
> +
> + err = stk_panel_disable(&stk->base);
> + if (err < 0)
> + dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
> +
> + err = mipi_dsi_detach(dsi);
> + if (err < 0)
> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n",
> + err);
> +
> + drm_panel_remove(&stk->base);
> +}
> +
> +static void stk_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct stk_panel *stk = mipi_dsi_get_drvdata(dsi);
> +
> + stk_panel_disable(&stk->base);
> +}
> +
> +static struct mipi_dsi_driver stk_panel_driver = {
> + .driver = {
> + .name = "panel-startek-kd070fhfid015",
> + .of_match_table = stk_of_match,
> + },
> + .probe = stk_panel_probe,
> + .remove = stk_panel_remove,
> + .shutdown = stk_panel_shutdown,
> +};
> +module_mipi_dsi_driver(stk_panel_driver);
> +
> +MODULE_AUTHOR("Guillaume La Roque <[email protected]>");
> +MODULE_DESCRIPTION("STARTEK KD070FHFID015");
> +MODULE_LICENSE("GPL");
>
With those changes:
Reviewed-by: Neil Armstrong <[email protected]>
Thanks,
Neil
On 13/07/2023 11:07, Alexandre Mergnat wrote:
> Build Startek KD070FHFID015 panel driver. This MIPI-DSI display
> can be used for the mt8365-evk board for example.
>
> Signed-off-by: Alexandre Mergnat <[email protected]>
> ---
> arch/arm64/configs/defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 0777bcae9104..cb24a3d1219b 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -816,6 +816,7 @@ CONFIG_DRM_PANEL_EDP=m
> CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
> CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
> CONFIG_DRM_PANEL_SITRONIX_ST7703=m
> +CONFIG_DRM_PANEL_STARTEK_KD070FHFID015=m
> CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
> CONFIG_DRM_PANEL_VISIONOX_VTDR6130=m
> CONFIG_DRM_LONTIUM_LT8912B=m
>
This should be applied by the Mediatek ARM64 maintainer,
Neil