Hi,
This patch series add support for AHCI compatible SATA controller, and it is
compliant with the ahci 1.3 and sata 3.0 specification. This driver is slightly
different than ahci_platform.c (e.g., reset control, subsystem setting).
changes since v3:
- update binding text: fix a typo and modify compatible strings.
changes since v2:
- according to Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines").
replace devm_reset_control_get_optional() by devm_reset_control_get_optional_exclusive().
changes since v1:
- update binding text: add missing "specifier pairs" descriptions.
- fix kbuild test warning: fix the error handling.
Ryder Lee (2):
ata: mediatek: add support for MediaTek SATA controller
dt-bindings: ata: add DT bindings for MediaTek SATA controller
Documentation/devicetree/bindings/ata/ahci-mtk.txt | 51 ++++++
drivers/ata/Kconfig | 10 ++
drivers/ata/Makefile | 1 +
drivers/ata/ahci_mtk.c | 196 +++++++++++++++++++++
4 files changed, 258 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt
create mode 100644 drivers/ata/ahci_mtk.c
--
1.9.1
Add DT bindings for the onboard SATA controller present on the MediaTek
SoCs.
Signed-off-by: Ryder Lee <[email protected]>
---
Documentation/devicetree/bindings/ata/ahci-mtk.txt | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt
diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
new file mode 100644
index 0000000..96c8d22
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
@@ -0,0 +1,51 @@
+MediaTek Serial ATA controller
+
+Required properties:
+ - compatible : Must be "mediatek,soc-model-ahci", "mediatek,mtk-ahci".
+ When using "mediatek,mtk-ahci" compatible strings, you
+ need SoC specific ones in addition, one of:
+ - "mediatek,mt7622-ahci"
+ - reg : Physical base addresses and length of register sets.
+ - interrupts : Interrupt associated with the SATA device.
+ - interrupt-names : Associated name must be: "hostc".
+ - clocks : A list of phandle and clock specifier pairs, one for each
+ entry in clock-names.
+ - clock-names : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
+ - phys : A phandle and PHY specifier pair for the PHY port.
+ - phy-names : Associated name must be: "sata-phy".
+ - ports-implemented : See ./ahci-platform.txt for details.
+
+Optional properties:
+ - power-domains : A phandle and power domain specifier pair to the power
+ domain which is responsible for collapsing and restoring
+ power to the peripheral.
+ - resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names : Associated names must be: "axi", "sw", "reg".
+ - mediatek,phy-mode : A phandle to the system controller, used to enable
+ SATA function.
+
+Example:
+
+ sata: sata@1a200000 {
+ compatible = "mediatek,mt7622-ahci",
+ "mediatek,mtk-ahci";
+ reg = <0 0x1a200000 0 0x1100>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hostc";
+ clocks = <&pciesys CLK_SATA_AHB_EN>,
+ <&pciesys CLK_SATA_AXI_EN>,
+ <&pciesys CLK_SATA_ASIC_EN>,
+ <&pciesys CLK_SATA_RBC_EN>,
+ <&pciesys CLK_SATA_PM_EN>;
+ clock-names = "ahb", "axi", "asic", "rbc", "pm";
+ phys = <&u3port1 PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+ <&pciesys MT7622_SATA_PHY_SW_RST>,
+ <&pciesys MT7622_SATA_PHY_REG_RST>;
+ reset-names = "axi", "sw", "reg";
+ mediatek,phy-mode = <&pciesys>;
+ };
--
1.9.1
This adds support the AHCI-compliant Serial ATA controller present
on MediaTek SoCs.
Signed-off-by: Ryder Lee <[email protected]>
---
drivers/ata/Kconfig | 10 +++
drivers/ata/Makefile | 1 +
drivers/ata/ahci_mtk.c | 196 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 207 insertions(+)
create mode 100644 drivers/ata/ahci_mtk.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 363fc53..488c937 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -153,6 +153,16 @@ config AHCI_CEVA
If unsure, say N.
+config AHCI_MTK
+ tristate "MediaTek AHCI SATA support"
+ depends on ARCH_MEDIATEK
+ select MFD_SYSCON
+ help
+ This option enables support for the MediaTek SoC's
+ onboard AHCI SATA controller.
+
+ If unsure, say N.
+
config AHCI_MVEBU
tristate "Marvell EBU AHCI SATA support"
depends on ARCH_MVEBU
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index a26ef5a..ff9cd2e 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_DM816) += ahci_dm816.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_MTK) += ahci_mtk.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_OCTEON) += ahci_octeon.o
obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
diff --git a/drivers/ata/ahci_mtk.c b/drivers/ata/ahci_mtk.c
new file mode 100644
index 0000000..80854f7
--- /dev/null
+++ b/drivers/ata/ahci_mtk.c
@@ -0,0 +1,196 @@
+/*
+ * MeidaTek AHCI SATA driver
+ *
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ryder Lee <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "ahci.h"
+
+#define DRV_NAME "ahci"
+
+#define SYS_CFG 0x14
+#define SYS_CFG_SATA_MSK GENMASK(31, 30)
+#define SYS_CFG_SATA_EN BIT(31)
+
+struct mtk_ahci_plat {
+ struct regmap *mode;
+ struct reset_control *axi_rst;
+ struct reset_control *sw_rst;
+ struct reset_control *reg_rst;
+};
+
+static const struct ata_port_info ahci_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
+static int mtk_ahci_platform_resets(struct ahci_host_priv *hpriv,
+ struct device *dev)
+{
+ struct mtk_ahci_plat *plat = hpriv->plat_data;
+ int err;
+
+ /* reset AXI bus and PHY part */
+ plat->axi_rst = devm_reset_control_get_optional_exclusive(dev, "axi");
+ if (PTR_ERR(plat->axi_rst) == -EPROBE_DEFER)
+ return PTR_ERR(plat->axi_rst);
+
+ plat->sw_rst = devm_reset_control_get_optional_exclusive(dev, "sw");
+ if (PTR_ERR(plat->sw_rst) == -EPROBE_DEFER)
+ return PTR_ERR(plat->sw_rst);
+
+ plat->reg_rst = devm_reset_control_get_optional_exclusive(dev, "reg");
+ if (PTR_ERR(plat->reg_rst) == -EPROBE_DEFER)
+ return PTR_ERR(plat->reg_rst);
+
+ err = reset_control_assert(plat->axi_rst);
+ if (err) {
+ dev_err(dev, "failed to assert AXI bus\n");
+ return err;
+ }
+
+ err = reset_control_assert(plat->sw_rst);
+ if (err) {
+ dev_err(dev, "failed to assert PHY digital part\n");
+ return err;
+ }
+
+ err = reset_control_assert(plat->reg_rst);
+ if (err) {
+ dev_err(dev, "failed to assert PHY register part\n");
+ return err;
+ }
+
+ err = reset_control_deassert(plat->reg_rst);
+ if (err) {
+ dev_err(dev, "failed to deassert PHY register part\n");
+ return err;
+ }
+
+ err = reset_control_deassert(plat->sw_rst);
+ if (err) {
+ dev_err(dev, "failed to deassert PHY digital part\n");
+ return err;
+ }
+
+ err = reset_control_deassert(plat->axi_rst);
+ if (err) {
+ dev_err(dev, "failed to deassert AXI bus\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int mtk_ahci_parse_property(struct ahci_host_priv *hpriv,
+ struct device *dev)
+{
+ struct mtk_ahci_plat *plat = hpriv->plat_data;
+ struct device_node *np = dev->of_node;
+
+ /* enable SATA function if needed */
+ if (of_find_property(np, "mediatek,phy-mode", NULL)) {
+ plat->mode = syscon_regmap_lookup_by_phandle(
+ np, "mediatek,phy-mode");
+ if (IS_ERR(plat->mode)) {
+ dev_err(dev, "missing phy-mode phandle\n");
+ return PTR_ERR(plat->mode);
+ }
+
+ regmap_update_bits(plat->mode, SYS_CFG, SYS_CFG_SATA_MSK,
+ SYS_CFG_SATA_EN);
+ }
+
+ of_property_read_u32(np, "ports-implemented", &hpriv->force_port_map);
+
+ return 0;
+}
+
+static int mtk_ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mtk_ahci_plat *plat;
+ struct ahci_host_priv *hpriv;
+ int err;
+
+ plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ hpriv->plat_data = plat;
+
+ err = mtk_ahci_parse_property(hpriv, dev);
+ if (err)
+ return err;
+
+ err = mtk_ahci_platform_resets(hpriv, dev);
+ if (err)
+ return err;
+
+ err = ahci_platform_enable_resources(hpriv);
+ if (err)
+ return err;
+
+ err = ahci_platform_init_host(pdev, hpriv, &ahci_port_info,
+ &ahci_platform_sht);
+ if (err)
+ goto disable_resources;
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return err;
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+ ahci_platform_resume);
+
+static const struct of_device_id ahci_of_match[] = {
+ { .compatible = "mediatek,mtk-ahci", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static struct platform_driver mtk_ahci_driver = {
+ .probe = mtk_ahci_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = ahci_of_match,
+ .pm = &ahci_pm_ops,
+ },
+};
+module_platform_driver(mtk_ahci_driver);
+
+MODULE_DESCRIPTION("MeidaTek SATA AHCI Driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
On Sat, Aug 12, 2017 at 09:31:03AM +0800, Ryder Lee wrote:
> This adds support the AHCI-compliant Serial ATA controller present
> on MediaTek SoCs.
>
> Signed-off-by: Ryder Lee <[email protected]>
Looks good to me.
Acked-by: Tejun Heo <[email protected]>
If others are okay with it, please let me know how the patches should
be routed. I can push both through libata, both can be routed through
dt tree, or we can handle them separately.
Thanks.
--
tejun
On 08/13/2017 08:38 PM, Tejun Heo wrote:
> On Sat, Aug 12, 2017 at 09:31:03AM +0800, Ryder Lee wrote:
>> This adds support the AHCI-compliant Serial ATA controller present
>> on MediaTek SoCs.
>>
>> Signed-off-by: Ryder Lee <[email protected]>
>
> Looks good to me.
>
> Acked-by: Tejun Heo <[email protected]>
>
> If others are okay with it, please let me know how the patches should
> be routed. I can push both through libata, both can be routed through
> dt tree, or we can handle them separately.
>
Please take the device tree bindings through your tree as well.
You might want to wait for a Ack from a device tree maintainer though.
Thanks,
Matthias
On Sat, Aug 12, 2017 at 09:31:04AM +0800, Ryder Lee wrote:
> Add DT bindings for the onboard SATA controller present on the MediaTek
> SoCs.
>
> Signed-off-by: Ryder Lee <[email protected]>
> ---
> Documentation/devicetree/bindings/ata/ahci-mtk.txt | 51 ++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt
>
> diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
> new file mode 100644
> index 0000000..96c8d22
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
> @@ -0,0 +1,51 @@
> +MediaTek Serial ATA controller
> +
> +Required properties:
> + - compatible : Must be "mediatek,soc-model-ahci", "mediatek,mtk-ahci".
Instead of "soc-model", pick something checkpatch.pl understands. IIRC,
"<chip>" is one.
With that,
Acked-by: Rob Herring <[email protected]>