On 22/11/17 12:26, Pintu Kumar wrote:
> Hello Jon,
> Yes I raised my query there almost 1 week back here.
> https://devtalk.nvidia.com/default/topic/1026527/jetson-tx2/-jetson-tx2-mmc-resume-errors-after-booting-from-suspend/
>
> But no response.
> So, I thought to discuss it here.
> May be some pointers may help to find the root cause.
> One point is that, I am able to resume the board with the sd-card, but
> resume from emmc is returning -110 (may be CMD5 timeout).
> Whether there is any difference between sd-card resume and emmc resume ?
> Do we need to check the card initialization sequence for emmc ?
OK great. There should be a team looking at these so please bare with
them. I noticed that you did not state which release you are using for
TX2 and there are two available (r27 and r28.1 [0]), unless I missed it.
So it is worth stating the release you are using.
What command are you using to suspend to disk?
Cheers
Jon
[0] https://developer.nvidia.com/embedded/linux-tegra-archive
--
nvpublic
From 1584769136764583790@xxx Wed Nov 22 12:27:03 +0000 2017
X-GM-THRID: 1584747422585671008
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread