The problem introduced in 2.6.12-mm2 as described
below appears to have resurfaced in the latest kernel,
2.6.14.
3ware 9000 Storage Controller device driver for Linux
v2.26.03.019fw.
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level,
low) -> IRQ 18
scsi3 : 3ware 9000 Storage Controller
3w-9xxx: scsi3: Found a 3ware 9000 Storage Controller
at 0xfceffc00, IRQ: 18.
3w-9xxx: scsi3: Firmware FE9X 2.08.00.003, BIOS BE9X
2.03.01.052, Ports: 12.
Vendor: Model: Rev:
Type: Direct-Access ANSI SCSI
revision: 00
sdb : sector size 0 reported, assuming 512.
SCSI device sdb: 1 512-byte hdwr sectors (0 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb : sector size 0 reported, assuming 512.
SCSI device sdb: 1 512-byte hdwr sectors (0 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb: unknown partition table
Attached scsi disk sdb at scsi3, channel 0, id 0, lun
0
Attached scsi generic sg1 at scsi3, channel 0, id 0,
lun 0, type 0
For a full description, view below
http://lkml.org/lkml/2005/6/26/83
Thanks
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
On 11/10/05, subbie subbie <[email protected]> wrote:
> The problem introduced in 2.6.12-mm2 as described
> below appears to have resurfaced in the latest kernel,
> 2.6.14.
The driver you are running from the 3ware website does not have the fix
for this in it. Please reproduce with the in-kernel v2.26.02.004 driver or
download the 9.3.0.1 driver for 9550SX from the 3ware website, it is backward
compatible to all 9000 series cards.
-Adam