2022-04-26 08:40:56

by Oleksij Rempel

Subject: [PATCH v4 1/4] dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards

This boards are based on STM32MP151AAD3 and use 10BaseT1L for
communication.

- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L CO2 sensor board
- PRTT1A - 10BaseT1L multi functional controller

Signed-off-by: Oleksij Rempel <[email protected]>
---
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 80b29f6903f0..a93c60241f28 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -51,6 +51,14 @@ properties:
- st,stm32mp135f-dk
- const: st,stm32mp135

+ - description: ST STM32MP151 based Boards
+ items:
+ - enum:
+ - prt,prtt1a # Protonic PRTT1A
+ - prt,prtt1c # Protonic PRTT1C
+ - prt,prtt1s # Protonic PRTT1S
+ - const: st,stm32mp151
+
- description: DH STM32MP153 SoM based Boards
items:
- const: dh,stm32mp153c-dhcom-drc02
--
2.30.2

2022-04-28 14:57:47

by Krzysztof Kozlowski

Subject: Re: [PATCH v4 1/4] dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards

On 26/04/2022 09:35, Oleksij Rempel wrote:
> This boards are based on STM32MP151AAD3 and use 10BaseT1L for
> communication.
>
> - PRTT1C - 10BaseT1L switch
> - PRTT1S - 10BaseT1L CO2 sensor board
> - PRTT1A - 10BaseT1L multi functional controller
>
> Signed-off-by: Oleksij Rempel <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 8 ++++++++
> 1 file changed, 8 insertions(+)
>


Acked-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof