Hi,
On Thu, Feb 08, 2024 at 11:34:58AM +0200, Ghennadi Procopciuc wrote:
> On 1/22/24 16:05, Ghennadi Procopciuc wrote:
> > From: Ghennadi Procopciuc <[email protected]>
> >
> > This patchset adds device tree support for S32G2 SCMI firmware and uSDHC
> > node. The SCMI clock IDs are based on a downstream version of the TF-A
> > stored on GitHub [0].
> >
> > I can send the patches individually if you prefer that instead of
> > submitting them all at once.??
> >
> > [0] https://github.com/nxp-auto-linux/arm-trusted-firmware
> >
> > Changes in v2:
> > - The SCMI clock bindings header has been removed.
> >
> > Ghennadi Procopciuc (2):
> > arm64: dts: s32g: add SCMI firmware node
> > arm64: dts: s32g: add uSDHC node
> >
> > arch/arm64/boot/dts/freescale/s32g2.dtsi | 37 ++++++++++++++++++-
> > .../arm64/boot/dts/freescale/s32g274a-evb.dts | 6 ++-
> > .../boot/dts/freescale/s32g274a-rdb2.dts | 6 ++-
> > 3 files changed, 46 insertions(+), 3 deletions(-)
> >
> Hi Chester,
>
> I want to confirm if you are open to accepting the proposed changes for
> ARM/NXP S32G architecture, given your maintainer role. Please let me
> know if any revisions or adaptations are required.
>
These patches look good to me.
Hi Shawn,
Per the discussion in another thread, could you help to apply these two
through the imx tree? Thanks!
Chester
> Regards,
> Ghennadi
>
On 3/2/24 04:01, Chester Lin wrote:
[...]
> Hi Shawn,
>
> Per the discussion in another thread, could you help to apply these two
> through the imx tree? Thanks!
>
> Chester
Hi Shawn,
I noticed that Chester's email was sent to you as a CC recipient, which
may cause it to be filtered out based on your inbox rules. This is why I
wanted to bring this thread to your attention and kindly ask you to
confirm whether these patches will be pulled through the imx tree.
Regards,
Ghennadi