Signed-off-by: Andrea della Porta <[email protected]>
---
.../pinctrl/brcm,bcm2712-pinctrl.yaml | 99 +++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
new file mode 100644
index 000000000000..2908dfe99f3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm2712-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2712 pin controller
+
+maintainers:
+ - Andrea della Porta <[email protected]>
+
+description:
+ Bindings for Broadcom's BCM2712 memory-mapped pin controller.
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2712-pinctrl
+ - brcm,bcm2712-aon-pinctrl
+ - brcm,bcm2712c0-pinctrl
+ - brcm,bcm2712c0-aon-pinctrl
+ - brcm,bcm2712d0-pinctrl
+ - brcm,bcm2712d0-aon-pinctrl
+
+ reg:
+ items:
+ - description: pin control registers
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ function:
+ enum: [ gpio, alt1, alt2, alt3, alt4, alt5, alt6, alt7, alt8,
+ aon_cpu_standbyb, aon_fp_4sec_resetb, aon_gpclk, aon_pwm,
+ arm_jtag, aud_fs_clk0, avs_pmu_bsc, bsc_m0, bsc_m1, bsc_m2,
+ bsc_m3, clk_observe, ctl_hdmi_5v, enet0, enet0_mii,
+ enet0_rgmii, ext_sc_clk, fl0, fl1, gpclk0, gpclk1, gpclk2,
+ hdmi_tx0_auto_i2c, hdmi_tx0_bsc, hdmi_tx1_auto_i2c,
+ hdmi_tx1_bsc, i2s_in, i2s_out, ir_in, mtsif, mtsif_alt,
+ mtsif_alt1, pdm, pkt, pm_led_out, sc0, sd0, sd2, sd_card_a,
+ sd_card_b, sd_card_c, sd_card_d, sd_card_e, sd_card_f,
+ sd_card_g, spdif_out, spi_m, spi_s, sr_edm_sense, te0, te1,
+ tsio, uart0, uart1, uart2, usb_pwr, usb_vbus, uui, vc_i2c0,
+ vc_i2c3, vc_i2c4, vc_i2c5, vc_i2csl, vc_pcm, vc_pwm0,
+ vc_pwm1, vc_spi0, vc_spi3, vc_spi4, vc_spi5, vc_uart0,
+ vc_uart2, vc_uart3, vc_uart4 ]
+
+ pins:
+ items:
+ pattern: "^((aon_)?s?gpio[0-6]?[0-9])|(emmc_(clk|cmd|dat[0-7]|ds))$"
+
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ additionalProperties: false
+
+ - type: object
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+ - |
+ pinctrl: pinctrl@7d504100 {
+ compatible = "brcm,bcm2712-pinctrl";
+ reg = <0x7d504100 0x30>;
+
+ uarta_24_pins: uarta_24_pins {
+ pin_rts {
+ function = "uart0";
+ pins = "gpio24";
+ bias-disable;
+ };
+
+ pin_cts {
+ function = "uart0";
+ pins = "gpio25";
+ bias-pull-up;
+ };
+ };
+
+ spi10_gpio2: spi10_gpio2 {
+ function = "vc_spi0";
+ pins = "gpio2", "gpio3", "gpio4";
+ bias-disable;
+ };
+ };
+...
--
2.35.3
On Sun, 14 Apr 2024 00:14:23 +0200, Andrea della Porta wrote:
> Signed-off-by: Andrea della Porta <[email protected]>
> ---
> .../pinctrl/brcm,bcm2712-pinctrl.yaml | 99 +++++++++++++++++++
> 1 file changed, 99 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:46:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:47:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:48:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:49:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:50:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:51:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:52:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:53:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:54:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:55:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:56:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:57:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml:58:18: [warning] wrong indentation: expected 18 but found 17 (indentation)
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/2d1272cad92ad618297a6683e9264e31b8f2df73.1713036964.git.andrea.porta@suse.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 14/04/2024 00:14, Andrea della Porta wrote:
> Signed-off-by: Andrea della Porta <[email protected]>
Missing commit msg. We can't take empty commits. You have entire commit
msg to describe the hardware, why not doing this?
Plus, this wasn't even tested...
> ---
> .../pinctrl/brcm,bcm2712-pinctrl.yaml | 99 +++++++++++++++++++
> 1 file changed, 99 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
> new file mode 100644
> index 000000000000..2908dfe99f3e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm2712-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM2712 pin controller
> +
> +maintainers:
> + - Andrea della Porta <[email protected]>
> +
> +description:
> + Bindings for Broadcom's BCM2712 memory-mapped pin controller.
Drop "Bindings for" and describe hardware. Bindings do not have to tell
they are bindings, it's obvious. They cannot be anything else.
> +
> +properties:
> + compatible:
> + enum:
> + - brcm,bcm2712-pinctrl
> + - brcm,bcm2712-aon-pinctrl
> + - brcm,bcm2712c0-pinctrl
> + - brcm,bcm2712c0-aon-pinctrl
> + - brcm,bcm2712d0-pinctrl
> + - brcm,bcm2712d0-aon-pinctrl
> +
> + reg:
> + items:
> + - description: pin control registers
> +
> +allOf:
> + - $ref: pinctrl.yaml#
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties:
> + anyOf:
> + - type: object
> + allOf:
> + - $ref: pincfg-node.yaml#
> + - $ref: pinmux-node.yaml#
> +
> + properties:
> + function:
> + enum: [ gpio, alt1, alt2, alt3, alt4, alt5, alt6, alt7, alt8,
> + aon_cpu_standbyb, aon_fp_4sec_resetb, aon_gpclk, aon_pwm,
> + arm_jtag, aud_fs_clk0, avs_pmu_bsc, bsc_m0, bsc_m1, bsc_m2,
> + bsc_m3, clk_observe, ctl_hdmi_5v, enet0, enet0_mii,
> + enet0_rgmii, ext_sc_clk, fl0, fl1, gpclk0, gpclk1, gpclk2,
> + hdmi_tx0_auto_i2c, hdmi_tx0_bsc, hdmi_tx1_auto_i2c,
> + hdmi_tx1_bsc, i2s_in, i2s_out, ir_in, mtsif, mtsif_alt,
> + mtsif_alt1, pdm, pkt, pm_led_out, sc0, sd0, sd2, sd_card_a,
> + sd_card_b, sd_card_c, sd_card_d, sd_card_e, sd_card_f,
> + sd_card_g, spdif_out, spi_m, spi_s, sr_edm_sense, te0, te1,
> + tsio, uart0, uart1, uart2, usb_pwr, usb_vbus, uui, vc_i2c0,
> + vc_i2c3, vc_i2c4, vc_i2c5, vc_i2csl, vc_pcm, vc_pwm0,
> + vc_pwm1, vc_spi0, vc_spi3, vc_spi4, vc_spi5, vc_uart0,
> + vc_uart2, vc_uart3, vc_uart4 ]
> +
> + pins:
> + items:
> + pattern: "^((aon_)?s?gpio[0-6]?[0-9])|(emmc_(clk|cmd|dat[0-7]|ds))$"
> +
> + bias-disable: true
> + bias-pull-down: true
> + bias-pull-up: true
> + additionalProperties: false
> +
> + - type: object
> + additionalProperties:
> + $ref: "#/additionalProperties/anyOf/0"
> +
> +examples:
> + - |
> + pinctrl: pinctrl@7d504100 {
> + compatible = "brcm,bcm2712-pinctrl";
> + reg = <0x7d504100 0x30>;
> +
> + uarta_24_pins: uarta_24_pins {
Underscores are not allowed. Please observe the rules of DTS coding
style (see docs).
> + pin_rts {
> + function = "uart0";
> + pins = "gpio24";
> + bias-disable;
> + };
> +
> + pin_cts {
> + function = "uart0";
> + pins = "gpio25";
> + bias-pull-up;
> + };
> + };
> +
> + spi10_gpio2: spi10_gpio2 {
> + function = "vc_spi0";
> + pins = "gpio2", "gpio3", "gpio4";
Messed indentation. Keep 4 space.
> + bias-disable;
> + };
> + };
> +...
Best regards,
Krzysztof
On 4/13/2024 3:14 PM, Andrea della Porta wrote:
> Signed-off-by: Andrea della Porta <[email protected]>
> ---
> .../pinctrl/brcm,bcm2712-pinctrl.yaml | 99 +++++++++++++++++++
> 1 file changed, 99 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
> new file mode 100644
> index 000000000000..2908dfe99f3e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm2712-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM2712 pin controller
This is not strictly speaking BCM2712 specific, the pin controller you
describe is a Broadcom STB product line pin controller.
Please describe it as such as and make BCM2712 a specific instance of
the chip using that pin controller, see more comments on patch #4.
--
Florian
On Sun, Apr 14, 2024 at 5:45 PM Florian Fainelli
<[email protected]> wrote:
> On 4/13/2024 3:14 PM, Andrea della Porta wrote:
> > Signed-off-by: Andrea della Porta <[email protected]>
> > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
(...)
> > +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm2712-pinctrl.yaml#
(...)
> > +title: Broadcom BCM2712 pin controller
>
> This is not strictly speaking BCM2712 specific, the pin controller you
> describe is a Broadcom STB product line pin controller.
>
> Please describe it as such as and make BCM2712 a specific instance of
> the chip using that pin controller, see more comments on patch #4.
So also the name of the bindings namespace should not be this one
controller IMO but the name of the family, bcm-stb-pinctrl.yaml or
so.
Yours,
Linus Walleij
On 08:45 Sun 14 Apr , Florian Fainelli wrote:
>
>
> On 4/13/2024 3:14 PM, Andrea della Porta wrote:
> > Signed-off-by: Andrea della Porta <[email protected]>
> > ---
> > .../pinctrl/brcm,bcm2712-pinctrl.yaml | 99 +++++++++++++++++++
> > 1 file changed, 99 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
> > new file mode 100644
> > index 000000000000..2908dfe99f3e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
> > @@ -0,0 +1,99 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm2712-pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Broadcom BCM2712 pin controller
>
> This is not strictly speaking BCM2712 specific, the pin controller you
> describe is a Broadcom STB product line pin controller.
>
> Please describe it as such as and make BCM2712 a specific instance of the
> chip using that pin controller, see more comments on patch #4.
Ack. It turned out that the pin controller is not strictly need for a bare minimum
support of sd card booting, so it will be drop in patchset V2. A future patchset
will re-introduce it when needed.
Many thanks,
Andrea
> --
> Florian