2023-02-13 15:52:44

by Bjorn Andersson

[permalink] [raw]
Subject: [PATCH v2 0/6] rpmsg: glink: Misc improvements

This series refactors glink_native to move IRQ and mailbox handling to SMEM and
RPM driver, in preparation for more work. It then introduces the logic to fail
glink transactions and pending intent requests in the event of the edge being
torn down.

Bjorn Andersson (6):
rpmsg: glink: Extract tx kick operation
rpmsg: glink: smem: Wrap driver context
rpmsg: glink: rpm: Wrap driver context
rpmsg: glink: Move irq and mbox handling to transports
rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
rpmsg: glink: Cancel pending intent requests at removal

drivers/remoteproc/qcom_common.h | 3 +-
drivers/rpmsg/qcom_glink_native.c | 93 +++++++++++++----------------
drivers/rpmsg/qcom_glink_native.h | 3 +-
drivers/rpmsg/qcom_glink_rpm.c | 94 +++++++++++++++++++++++------
drivers/rpmsg/qcom_glink_smem.c | 98 +++++++++++++++++++++++++++----
include/linux/rpmsg/qcom_glink.h | 12 ++--
6 files changed, 212 insertions(+), 91 deletions(-)

--
2.25.1



2023-02-13 15:52:47

by Bjorn Andersson

[permalink] [raw]
Subject: [PATCH v2 4/6] rpmsg: glink: Move irq and mbox handling to transports

Not all GLINK transports uses an interrupt and a mailbox instance. The
interrupt for RPM needs to be IRQF_NOSUSPEND, while it seems reasonable
for the SMEM interrupt to use irq_set_wake. The glink struct device is
constructed in the SMEM and RPM drivers but torn down in the core
driver.

Move the interrupt and kick handling into the SMEM and RPM driver, to
improve this and facilitate further improvements.

Signed-off-by: Bjorn Andersson <[email protected]>
---

Changes since v1:
- Renamed qcom_glink_native_{intr,rx}
- Moved mbox_free_channel() before device_unregister()

drivers/rpmsg/qcom_glink_native.c | 48 ++-------------------------
drivers/rpmsg/qcom_glink_native.h | 3 +-
drivers/rpmsg/qcom_glink_rpm.c | 50 +++++++++++++++++++++++++++-
drivers/rpmsg/qcom_glink_smem.c | 55 +++++++++++++++++++++++++++++--
4 files changed, 107 insertions(+), 49 deletions(-)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 5fd8b70271b7..8dd8cf033b2d 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -11,7 +11,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/rpmsg.h>
@@ -78,11 +77,8 @@ struct glink_core_rx_intent {
/**
* struct qcom_glink - driver context, relates to one remote subsystem
* @dev: reference to the associated struct device
- * @mbox_client: mailbox client
- * @mbox_chan: mailbox channel
* @rx_pipe: pipe object for receive FIFO
* @tx_pipe: pipe object for transmit FIFO
- * @irq: IRQ for signaling incoming events
* @rx_work: worker for handling received control messages
* @rx_lock: protects the @rx_queue
* @rx_queue: queue of received control messages to be processed in @rx_work
@@ -98,14 +94,9 @@ struct glink_core_rx_intent {
struct qcom_glink {
struct device *dev;

- struct mbox_client mbox_client;
- struct mbox_chan *mbox_chan;
-
struct qcom_glink_pipe *rx_pipe;
struct qcom_glink_pipe *tx_pipe;

- int irq;
-
struct work_struct rx_work;
spinlock_t rx_lock;
struct list_head rx_queue;
@@ -305,8 +296,7 @@ static void qcom_glink_tx_write(struct qcom_glink *glink,

static void qcom_glink_tx_kick(struct qcom_glink *glink)
{
- mbox_send_message(glink->mbox_chan, NULL);
- mbox_client_txdone(glink->mbox_chan, 0);
+ glink->tx_pipe->kick(glink->tx_pipe);
}

static void qcom_glink_send_read_notify(struct qcom_glink *glink)
@@ -1004,9 +994,8 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
return 0;
}

-static irqreturn_t qcom_glink_native_intr(int irq, void *data)
+void qcom_glink_native_rx(struct qcom_glink *glink)
{
- struct qcom_glink *glink = data;
struct glink_msg msg;
unsigned int param1;
unsigned int param2;
@@ -1075,9 +1064,8 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data)
if (ret)
break;
}
-
- return IRQ_HANDLED;
}
+EXPORT_SYMBOL(qcom_glink_native_rx);

/* Locally initiated rpmsg_create_ept */
static struct glink_channel *qcom_glink_create_local(struct qcom_glink *glink,
@@ -1723,7 +1711,6 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
struct qcom_glink_pipe *tx,
bool intentless)
{
- int irq;
int ret;
struct qcom_glink *glink;

@@ -1754,27 +1741,6 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
if (ret)
dev_err(dev, "failed to add groups\n");

- glink->mbox_client.dev = dev;
- glink->mbox_client.knows_txdone = true;
- glink->mbox_chan = mbox_request_channel(&glink->mbox_client, 0);
- if (IS_ERR(glink->mbox_chan)) {
- if (PTR_ERR(glink->mbox_chan) != -EPROBE_DEFER)
- dev_err(dev, "failed to acquire IPC channel\n");
- return ERR_CAST(glink->mbox_chan);
- }
-
- irq = of_irq_get(dev->of_node, 0);
- ret = devm_request_irq(dev, irq,
- qcom_glink_native_intr,
- IRQF_NO_SUSPEND | IRQF_SHARED,
- "glink-native", glink);
- if (ret) {
- dev_err(dev, "failed to request IRQ\n");
- return ERR_PTR(ret);
- }
-
- glink->irq = irq;
-
ret = qcom_glink_send_version(glink);
if (ret)
return ERR_PTR(ret);
@@ -1800,7 +1766,6 @@ void qcom_glink_native_remove(struct qcom_glink *glink)
int cid;
int ret;

- disable_irq(glink->irq);
qcom_glink_cancel_rx_work(glink);

ret = device_for_each_child(glink->dev, NULL, qcom_glink_remove_device);
@@ -1817,15 +1782,8 @@ void qcom_glink_native_remove(struct qcom_glink *glink)

idr_destroy(&glink->lcids);
idr_destroy(&glink->rcids);
- mbox_free_channel(glink->mbox_chan);
}
EXPORT_SYMBOL_GPL(qcom_glink_native_remove);

-void qcom_glink_native_unregister(struct qcom_glink *glink)
-{
- device_unregister(glink->dev);
-}
-EXPORT_SYMBOL_GPL(qcom_glink_native_unregister);
-
MODULE_DESCRIPTION("Qualcomm GLINK driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/rpmsg/qcom_glink_native.h b/drivers/rpmsg/qcom_glink_native.h
index e9a8671616c7..9462b37eccee 100644
--- a/drivers/rpmsg/qcom_glink_native.h
+++ b/drivers/rpmsg/qcom_glink_native.h
@@ -24,6 +24,7 @@ struct qcom_glink_pipe {
void (*write)(struct qcom_glink_pipe *glink_pipe,
const void *hdr, size_t hlen,
const void *data, size_t dlen);
+ void (*kick)(struct qcom_glink_pipe *glink_pipe);
};

struct device;
@@ -35,6 +36,6 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
struct qcom_glink_pipe *tx,
bool intentless);
void qcom_glink_native_remove(struct qcom_glink *glink);
+void qcom_glink_native_rx(struct qcom_glink *glink);

-void qcom_glink_native_unregister(struct qcom_glink *glink);
#endif
diff --git a/drivers/rpmsg/qcom_glink_rpm.c b/drivers/rpmsg/qcom_glink_rpm.c
index 6443843df6ca..5179f834a10f 100644
--- a/drivers/rpmsg/qcom_glink_rpm.c
+++ b/drivers/rpmsg/qcom_glink_rpm.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/rpmsg.h>
@@ -56,6 +57,11 @@ struct glink_rpm_pipe {
struct glink_rpm {
struct qcom_glink *glink;

+ int irq;
+
+ struct mbox_client mbox_client;
+ struct mbox_chan *mbox_chan;
+
struct glink_rpm_pipe rx_pipe;
struct glink_rpm_pipe tx_pipe;
};
@@ -186,6 +192,24 @@ static void glink_rpm_tx_write(struct qcom_glink_pipe *glink_pipe,
writel(head, pipe->head);
}

+static void glink_rpm_tx_kick(struct qcom_glink_pipe *glink_pipe)
+{
+ struct glink_rpm_pipe *pipe = to_rpm_pipe(glink_pipe);
+ struct glink_rpm *rpm = container_of(pipe, struct glink_rpm, tx_pipe);
+
+ mbox_send_message(rpm->mbox_chan, NULL);
+ mbox_client_txdone(rpm->mbox_chan, 0);
+}
+
+static irqreturn_t qcom_glink_rpm_intr(int irq, void *data)
+{
+ struct glink_rpm *rpm = data;
+
+ qcom_glink_native_rx(rpm->glink);
+
+ return IRQ_HANDLED;
+}
+
static int glink_rpm_parse_toc(struct device *dev,
void __iomem *msg_ram,
size_t msg_ram_size,
@@ -292,12 +316,28 @@ static int glink_rpm_probe(struct platform_device *pdev)
if (ret)
return ret;

+ rpm->irq = of_irq_get(dev->of_node, 0);
+ ret = devm_request_irq(dev, rpm->irq, qcom_glink_rpm_intr,
+ IRQF_NO_SUSPEND | IRQF_NO_AUTOEN,
+ "glink-rpm", rpm);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ\n");
+ return ret;
+ }
+
+ rpm->mbox_client.dev = dev;
+ rpm->mbox_client.knows_txdone = true;
+ rpm->mbox_chan = mbox_request_channel(&rpm->mbox_client, 0);
+ if (IS_ERR(rpm->mbox_chan))
+ return dev_err_probe(dev, PTR_ERR(rpm->mbox_chan), "failed to acquire IPC channel\n");
+
/* Pipe specific accessors */
rpm->rx_pipe.native.avail = glink_rpm_rx_avail;
rpm->rx_pipe.native.peak = glink_rpm_rx_peak;
rpm->rx_pipe.native.advance = glink_rpm_rx_advance;
rpm->tx_pipe.native.avail = glink_rpm_tx_avail;
rpm->tx_pipe.native.write = glink_rpm_tx_write;
+ rpm->tx_pipe.native.kick = glink_rpm_tx_kick;

writel(0, rpm->tx_pipe.head);
writel(0, rpm->rx_pipe.tail);
@@ -307,13 +347,17 @@ static int glink_rpm_probe(struct platform_device *pdev)
&rpm->rx_pipe.native,
&rpm->tx_pipe.native,
true);
- if (IS_ERR(glink))
+ if (IS_ERR(glink)) {
+ mbox_free_channel(rpm->mbox_chan);
return PTR_ERR(glink);
+ }

rpm->glink = glink;

platform_set_drvdata(pdev, rpm);

+ enable_irq(rpm->irq);
+
return 0;
}

@@ -322,8 +366,12 @@ static int glink_rpm_remove(struct platform_device *pdev)
struct glink_rpm *rpm = platform_get_drvdata(pdev);
struct qcom_glink *glink = rpm->glink;

+ disable_irq(rpm->irq);
+
qcom_glink_native_remove(glink);

+ mbox_free_channel(rpm->mbox_chan);
+
return 0;
}

diff --git a/drivers/rpmsg/qcom_glink_smem.c b/drivers/rpmsg/qcom_glink_smem.c
index a9c477df4d68..05b4fe0a7387 100644
--- a/drivers/rpmsg/qcom_glink_smem.c
+++ b/drivers/rpmsg/qcom_glink_smem.c
@@ -7,8 +7,10 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/mailbox_client.h>
#include <linux/mfd/syscon.h>
#include <linux/slab.h>
#include <linux/rpmsg.h>
@@ -36,8 +38,12 @@
struct qcom_glink_smem {
struct device dev;

+ int irq;
struct qcom_glink *glink;

+ struct mbox_client mbox_client;
+ struct mbox_chan *mbox_chan;
+
u32 remote_pid;
};

@@ -186,6 +192,24 @@ static void glink_smem_tx_write(struct qcom_glink_pipe *glink_pipe,
*pipe->head = cpu_to_le32(head);
}

+static void glink_smem_tx_kick(struct qcom_glink_pipe *glink_pipe)
+{
+ struct glink_smem_pipe *pipe = to_smem_pipe(glink_pipe);
+ struct qcom_glink_smem *smem = pipe->smem;
+
+ mbox_send_message(smem->mbox_chan, NULL);
+ mbox_client_txdone(smem->mbox_chan, 0);
+}
+
+static irqreturn_t qcom_glink_smem_intr(int irq, void *data)
+{
+ struct qcom_glink_smem *smem = data;
+
+ qcom_glink_native_rx(smem->glink);
+
+ return IRQ_HANDLED;
+}
+
static void qcom_glink_smem_release(struct device *dev)
{
struct qcom_glink_smem *smem = container_of(dev, struct qcom_glink_smem, dev);
@@ -280,6 +304,24 @@ struct qcom_glink_smem *qcom_glink_smem_register(struct device *parent,
goto err_put_dev;
}

+ smem->irq = of_irq_get(smem->dev.of_node, 0);
+ ret = devm_request_irq(&smem->dev, smem->irq, qcom_glink_smem_intr,
+ IRQF_NO_SUSPEND | IRQF_NO_AUTOEN,
+ "glink-smem", smem);
+ if (ret) {
+ dev_err(&smem->dev, "failed to request IRQ\n");
+ goto err_put_dev;
+ }
+
+ smem->mbox_client.dev = &smem->dev;
+ smem->mbox_client.knows_txdone = true;
+ smem->mbox_chan = mbox_request_channel(&smem->mbox_client, 0);
+ if (IS_ERR(smem->mbox_chan)) {
+ ret = dev_err_probe(&smem->dev, PTR_ERR(smem->mbox_chan),
+ "failed to acquire IPC channel\n");
+ goto err_put_dev;
+ }
+
rx_pipe->smem = smem;
rx_pipe->native.avail = glink_smem_rx_avail;
rx_pipe->native.peak = glink_smem_rx_peak;
@@ -288,6 +330,7 @@ struct qcom_glink_smem *qcom_glink_smem_register(struct device *parent,
tx_pipe->smem = smem;
tx_pipe->native.avail = glink_smem_tx_avail;
tx_pipe->native.write = glink_smem_tx_write;
+ tx_pipe->native.kick = glink_smem_tx_kick;

*rx_pipe->tail = 0;
*tx_pipe->head = 0;
@@ -298,13 +341,17 @@ struct qcom_glink_smem *qcom_glink_smem_register(struct device *parent,
false);
if (IS_ERR(glink)) {
ret = PTR_ERR(glink);
- goto err_put_dev;
+ goto err_free_mbox;
}

smem->glink = glink;

+ enable_irq(smem->irq);
+
return smem;

+err_free_mbox:
+ mbox_free_channel(smem->mbox_chan);

err_put_dev:
device_unregister(dev);
@@ -317,8 +364,12 @@ void qcom_glink_smem_unregister(struct qcom_glink_smem *smem)
{
struct qcom_glink *glink = smem->glink;

+ disable_irq(smem->irq);
+
qcom_glink_native_remove(glink);
- qcom_glink_native_unregister(glink);
+
+ mbox_free_channel(smem->mbox_chan);
+ device_unregister(&smem->dev);
}
EXPORT_SYMBOL_GPL(qcom_glink_smem_unregister);

--
2.25.1


2023-02-14 02:40:32

by Chris Lew

[permalink] [raw]
Subject: Re: [PATCH v2 4/6] rpmsg: glink: Move irq and mbox handling to transports



On 2/13/2023 7:52 AM, Bjorn Andersson wrote:
> Not all GLINK transports uses an interrupt and a mailbox instance. The
> interrupt for RPM needs to be IRQF_NOSUSPEND, while it seems reasonable
> for the SMEM interrupt to use irq_set_wake. The glink struct device is
> constructed in the SMEM and RPM drivers but torn down in the core
> driver.
>
> Move the interrupt and kick handling into the SMEM and RPM driver, to
> improve this and facilitate further improvements.
>
> Signed-off-by: Bjorn Andersson <[email protected]>
> ---
>
> Changes since v1:
> - Renamed qcom_glink_native_{intr,rx}
> - Moved mbox_free_channel() before device_unregister()
>
> drivers/rpmsg/qcom_glink_native.c | 48 ++-------------------------
> drivers/rpmsg/qcom_glink_native.h | 3 +-
> drivers/rpmsg/qcom_glink_rpm.c | 50 +++++++++++++++++++++++++++-
> drivers/rpmsg/qcom_glink_smem.c | 55 +++++++++++++++++++++++++++++--
> 4 files changed, 107 insertions(+), 49 deletions(-)
>

Reviewed-by: Chris Lew <[email protected]>

> diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
> index 5fd8b70271b7..8dd8cf033b2d 100644
> --- a/drivers/rpmsg/qcom_glink_native.c
> +++ b/drivers/rpmsg/qcom_glink_native.c
> @@ -11,7 +11,6 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_address.h>
> -#include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/rpmsg.h>
> @@ -78,11 +77,8 @@ struct glink_core_rx_intent {
> /**
> * struct qcom_glink - driver context, relates to one remote subsystem
> * @dev: reference to the associated struct device
> - * @mbox_client: mailbox client
> - * @mbox_chan: mailbox channel
> * @rx_pipe: pipe object for receive FIFO
> * @tx_pipe: pipe object for transmit FIFO
> - * @irq: IRQ for signaling incoming events
> * @rx_work: worker for handling received control messages
> * @rx_lock: protects the @rx_queue
> * @rx_queue: queue of received control messages to be processed in @rx_work
> @@ -98,14 +94,9 @@ struct glink_core_rx_intent {
> struct qcom_glink {
> struct device *dev;
>
> - struct mbox_client mbox_client;
> - struct mbox_chan *mbox_chan;
> -
> struct qcom_glink_pipe *rx_pipe;
> struct qcom_glink_pipe *tx_pipe;
>
> - int irq;
> -
> struct work_struct rx_work;
> spinlock_t rx_lock;
> struct list_head rx_queue;
> @@ -305,8 +296,7 @@ static void qcom_glink_tx_write(struct qcom_glink *glink,
>
> static void qcom_glink_tx_kick(struct qcom_glink *glink)
> {
> - mbox_send_message(glink->mbox_chan, NULL);
> - mbox_client_txdone(glink->mbox_chan, 0);
> + glink->tx_pipe->kick(glink->tx_pipe);
> }
>
> static void qcom_glink_send_read_notify(struct qcom_glink *glink)
> @@ -1004,9 +994,8 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
> return 0;
> }
>
> -static irqreturn_t qcom_glink_native_intr(int irq, void *data)
> +void qcom_glink_native_rx(struct qcom_glink *glink)
> {
> - struct qcom_glink *glink = data;
> struct glink_msg msg;
> unsigned int param1;
> unsigned int param2;
> @@ -1075,9 +1064,8 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data)
> if (ret)
> break;
> }
> -
> - return IRQ_HANDLED;
> }
> +EXPORT_SYMBOL(qcom_glink_native_rx);
>
> /* Locally initiated rpmsg_create_ept */
> static struct glink_channel *qcom_glink_create_local(struct qcom_glink *glink,
> @@ -1723,7 +1711,6 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
> struct qcom_glink_pipe *tx,
> bool intentless)
> {
> - int irq;
> int ret;
> struct qcom_glink *glink;
>
> @@ -1754,27 +1741,6 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
> if (ret)
> dev_err(dev, "failed to add groups\n");
>
> - glink->mbox_client.dev = dev;
> - glink->mbox_client.knows_txdone = true;
> - glink->mbox_chan = mbox_request_channel(&glink->mbox_client, 0);
> - if (IS_ERR(glink->mbox_chan)) {
> - if (PTR_ERR(glink->mbox_chan) != -EPROBE_DEFER)
> - dev_err(dev, "failed to acquire IPC channel\n");
> - return ERR_CAST(glink->mbox_chan);
> - }
> -
> - irq = of_irq_get(dev->of_node, 0);
> - ret = devm_request_irq(dev, irq,
> - qcom_glink_native_intr,
> - IRQF_NO_SUSPEND | IRQF_SHARED,
> - "glink-native", glink);
> - if (ret) {
> - dev_err(dev, "failed to request IRQ\n");
> - return ERR_PTR(ret);
> - }
> -
> - glink->irq = irq;
> -
> ret = qcom_glink_send_version(glink);
> if (ret)
> return ERR_PTR(ret);
> @@ -1800,7 +1766,6 @@ void qcom_glink_native_remove(struct qcom_glink *glink)
> int cid;
> int ret;
>
> - disable_irq(glink->irq);
> qcom_glink_cancel_rx_work(glink);
>
> ret = device_for_each_child(glink->dev, NULL, qcom_glink_remove_device);
> @@ -1817,15 +1782,8 @@ void qcom_glink_native_remove(struct qcom_glink *glink)
>
> idr_destroy(&glink->lcids);
> idr_destroy(&glink->rcids);
> - mbox_free_channel(glink->mbox_chan);
> }
> EXPORT_SYMBOL_GPL(qcom_glink_native_remove);
>
> -void qcom_glink_native_unregister(struct qcom_glink *glink)
> -{
> - device_unregister(glink->dev);
> -}
> -EXPORT_SYMBOL_GPL(qcom_glink_native_unregister);
> -
> MODULE_DESCRIPTION("Qualcomm GLINK driver");
> MODULE_LICENSE("GPL v2");
> diff --git a/drivers/rpmsg/qcom_glink_native.h b/drivers/rpmsg/qcom_glink_native.h
> index e9a8671616c7..9462b37eccee 100644
> --- a/drivers/rpmsg/qcom_glink_native.h
> +++ b/drivers/rpmsg/qcom_glink_native.h
> @@ -24,6 +24,7 @@ struct qcom_glink_pipe {
> void (*write)(struct qcom_glink_pipe *glink_pipe,
> const void *hdr, size_t hlen,
> const void *data, size_t dlen);
> + void (*kick)(struct qcom_glink_pipe *glink_pipe);
> };
>
> struct device;
> @@ -35,6 +36,6 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
> struct qcom_glink_pipe *tx,
> bool intentless);
> void qcom_glink_native_remove(struct qcom_glink *glink);
> +void qcom_glink_native_rx(struct qcom_glink *glink);
>
> -void qcom_glink_native_unregister(struct qcom_glink *glink);
> #endif
> diff --git a/drivers/rpmsg/qcom_glink_rpm.c b/drivers/rpmsg/qcom_glink_rpm.c
> index 6443843df6ca..5179f834a10f 100644
> --- a/drivers/rpmsg/qcom_glink_rpm.c
> +++ b/drivers/rpmsg/qcom_glink_rpm.c
> @@ -11,6 +11,7 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_address.h>
> +#include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/rpmsg.h>
> @@ -56,6 +57,11 @@ struct glink_rpm_pipe {
> struct glink_rpm {
> struct qcom_glink *glink;
>
> + int irq;
> +
> + struct mbox_client mbox_client;
> + struct mbox_chan *mbox_chan;
> +
> struct glink_rpm_pipe rx_pipe;
> struct glink_rpm_pipe tx_pipe;
> };
> @@ -186,6 +192,24 @@ static void glink_rpm_tx_write(struct qcom_glink_pipe *glink_pipe,
> writel(head, pipe->head);
> }
>
> +static void glink_rpm_tx_kick(struct qcom_glink_pipe *glink_pipe)
> +{
> + struct glink_rpm_pipe *pipe = to_rpm_pipe(glink_pipe);
> + struct glink_rpm *rpm = container_of(pipe, struct glink_rpm, tx_pipe);
> +
> + mbox_send_message(rpm->mbox_chan, NULL);
> + mbox_client_txdone(rpm->mbox_chan, 0);
> +}
> +
> +static irqreturn_t qcom_glink_rpm_intr(int irq, void *data)
> +{
> + struct glink_rpm *rpm = data;
> +
> + qcom_glink_native_rx(rpm->glink);
> +
> + return IRQ_HANDLED;
> +}
> +
> static int glink_rpm_parse_toc(struct device *dev,
> void __iomem *msg_ram,
> size_t msg_ram_size,
> @@ -292,12 +316,28 @@ static int glink_rpm_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + rpm->irq = of_irq_get(dev->of_node, 0);
> + ret = devm_request_irq(dev, rpm->irq, qcom_glink_rpm_intr,
> + IRQF_NO_SUSPEND | IRQF_NO_AUTOEN,
> + "glink-rpm", rpm);
> + if (ret) {
> + dev_err(dev, "failed to request IRQ\n");
> + return ret;
> + }
> +
> + rpm->mbox_client.dev = dev;
> + rpm->mbox_client.knows_txdone = true;
> + rpm->mbox_chan = mbox_request_channel(&rpm->mbox_client, 0);
> + if (IS_ERR(rpm->mbox_chan))
> + return dev_err_probe(dev, PTR_ERR(rpm->mbox_chan), "failed to acquire IPC channel\n");
> +
> /* Pipe specific accessors */
> rpm->rx_pipe.native.avail = glink_rpm_rx_avail;
> rpm->rx_pipe.native.peak = glink_rpm_rx_peak;
> rpm->rx_pipe.native.advance = glink_rpm_rx_advance;
> rpm->tx_pipe.native.avail = glink_rpm_tx_avail;
> rpm->tx_pipe.native.write = glink_rpm_tx_write;
> + rpm->tx_pipe.native.kick = glink_rpm_tx_kick;
>
> writel(0, rpm->tx_pipe.head);
> writel(0, rpm->rx_pipe.tail);
> @@ -307,13 +347,17 @@ static int glink_rpm_probe(struct platform_device *pdev)
> &rpm->rx_pipe.native,
> &rpm->tx_pipe.native,
> true);
> - if (IS_ERR(glink))
> + if (IS_ERR(glink)) {
> + mbox_free_channel(rpm->mbox_chan);
> return PTR_ERR(glink);
> + }
>
> rpm->glink = glink;
>
> platform_set_drvdata(pdev, rpm);
>
> + enable_irq(rpm->irq);
> +
> return 0;
> }
>
> @@ -322,8 +366,12 @@ static int glink_rpm_remove(struct platform_device *pdev)
> struct glink_rpm *rpm = platform_get_drvdata(pdev);
> struct qcom_glink *glink = rpm->glink;
>
> + disable_irq(rpm->irq);
> +
> qcom_glink_native_remove(glink);
>
> + mbox_free_channel(rpm->mbox_chan);
> +
> return 0;
> }
>
> diff --git a/drivers/rpmsg/qcom_glink_smem.c b/drivers/rpmsg/qcom_glink_smem.c
> index a9c477df4d68..05b4fe0a7387 100644
> --- a/drivers/rpmsg/qcom_glink_smem.c
> +++ b/drivers/rpmsg/qcom_glink_smem.c
> @@ -7,8 +7,10 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_address.h>
> +#include <linux/of_irq.h>
> #include <linux/interrupt.h>
> #include <linux/platform_device.h>
> +#include <linux/mailbox_client.h>
> #include <linux/mfd/syscon.h>
> #include <linux/slab.h>
> #include <linux/rpmsg.h>
> @@ -36,8 +38,12 @@
> struct qcom_glink_smem {
> struct device dev;
>
> + int irq;
> struct qcom_glink *glink;
>
> + struct mbox_client mbox_client;
> + struct mbox_chan *mbox_chan;
> +
> u32 remote_pid;
> };
>
> @@ -186,6 +192,24 @@ static void glink_smem_tx_write(struct qcom_glink_pipe *glink_pipe,
> *pipe->head = cpu_to_le32(head);
> }
>
> +static void glink_smem_tx_kick(struct qcom_glink_pipe *glink_pipe)
> +{
> + struct glink_smem_pipe *pipe = to_smem_pipe(glink_pipe);
> + struct qcom_glink_smem *smem = pipe->smem;
> +
> + mbox_send_message(smem->mbox_chan, NULL);
> + mbox_client_txdone(smem->mbox_chan, 0);
> +}
> +
> +static irqreturn_t qcom_glink_smem_intr(int irq, void *data)
> +{
> + struct qcom_glink_smem *smem = data;
> +
> + qcom_glink_native_rx(smem->glink);
> +
> + return IRQ_HANDLED;
> +}
> +
> static void qcom_glink_smem_release(struct device *dev)
> {
> struct qcom_glink_smem *smem = container_of(dev, struct qcom_glink_smem, dev);
> @@ -280,6 +304,24 @@ struct qcom_glink_smem *qcom_glink_smem_register(struct device *parent,
> goto err_put_dev;
> }
>
> + smem->irq = of_irq_get(smem->dev.of_node, 0);
> + ret = devm_request_irq(&smem->dev, smem->irq, qcom_glink_smem_intr,
> + IRQF_NO_SUSPEND | IRQF_NO_AUTOEN,
> + "glink-smem", smem);
> + if (ret) {
> + dev_err(&smem->dev, "failed to request IRQ\n");
> + goto err_put_dev;
> + }
> +
> + smem->mbox_client.dev = &smem->dev;
> + smem->mbox_client.knows_txdone = true;
> + smem->mbox_chan = mbox_request_channel(&smem->mbox_client, 0);
> + if (IS_ERR(smem->mbox_chan)) {
> + ret = dev_err_probe(&smem->dev, PTR_ERR(smem->mbox_chan),
> + "failed to acquire IPC channel\n");
> + goto err_put_dev;
> + }
> +
> rx_pipe->smem = smem;
> rx_pipe->native.avail = glink_smem_rx_avail;
> rx_pipe->native.peak = glink_smem_rx_peak;
> @@ -288,6 +330,7 @@ struct qcom_glink_smem *qcom_glink_smem_register(struct device *parent,
> tx_pipe->smem = smem;
> tx_pipe->native.avail = glink_smem_tx_avail;
> tx_pipe->native.write = glink_smem_tx_write;
> + tx_pipe->native.kick = glink_smem_tx_kick;
>
> *rx_pipe->tail = 0;
> *tx_pipe->head = 0;
> @@ -298,13 +341,17 @@ struct qcom_glink_smem *qcom_glink_smem_register(struct device *parent,
> false);
> if (IS_ERR(glink)) {
> ret = PTR_ERR(glink);
> - goto err_put_dev;
> + goto err_free_mbox;
> }
>
> smem->glink = glink;
>
> + enable_irq(smem->irq);
> +
> return smem;
>
> +err_free_mbox:
> + mbox_free_channel(smem->mbox_chan);
>
> err_put_dev:
> device_unregister(dev);
> @@ -317,8 +364,12 @@ void qcom_glink_smem_unregister(struct qcom_glink_smem *smem)
> {
> struct qcom_glink *glink = smem->glink;
>
> + disable_irq(smem->irq);
> +
> qcom_glink_native_remove(glink);
> - qcom_glink_native_unregister(glink);
> +
> + mbox_free_channel(smem->mbox_chan);
> + device_unregister(&smem->dev);
> }
> EXPORT_SYMBOL_GPL(qcom_glink_smem_unregister);
>

2023-02-14 17:28:36

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH v2 0/6] rpmsg: glink: Misc improvements

On Mon, 13 Feb 2023 07:52:09 -0800, Bjorn Andersson wrote:
> This series refactors glink_native to move IRQ and mailbox handling to SMEM and
> RPM driver, in preparation for more work. It then introduces the logic to fail
> glink transactions and pending intent requests in the event of the edge being
> torn down.
>
> Bjorn Andersson (6):
> rpmsg: glink: Extract tx kick operation
> rpmsg: glink: smem: Wrap driver context
> rpmsg: glink: rpm: Wrap driver context
> rpmsg: glink: Move irq and mbox handling to transports
> rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
> rpmsg: glink: Cancel pending intent requests at removal
>
> [...]

Applied, thanks!

[1/6] rpmsg: glink: Extract tx kick operation
commit: 8278fd3144779d883779d1f5bcbf49da36587fd1
[2/6] rpmsg: glink: smem: Wrap driver context
commit: ab9fdd41d970c38ddc0fd59e5f8f37e8d966d454
[3/6] rpmsg: glink: rpm: Wrap driver context
commit: 178c3af447f92c58d5b1153df2cd02b755c083c8
[4/6] rpmsg: glink: Move irq and mbox handling to transports
commit: f424d1cbe8c7ef78a4b639502fa9904c4198387b
[5/6] rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
commit: 9c96bacf1af51bc71898f31e025f08338c6ca4da
[6/6] rpmsg: glink: Cancel pending intent requests at removal
commit: fb23b97346f9aaa9f7b7a996e7baf066c88d69bd

Best regards,
--
Bjorn Andersson <[email protected]>