The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@22a8000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm nodes as
the soc dtsi doesn't disable these devices. Drop these properties, too.
Signed-off-by: Uwe Kleine-König <[email protected]>
---
.../boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
index bfcd8f7d86dd..f999eb244373 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
@@ -46,19 +46,19 @@ led-controller {
led-1 {
label = "red";
max-brightness = <255>;
- pwms = <&pwm6 0 50000>;
+ pwms = <&pwm6 0 50000 0>;
};
led-2 {
label = "green";
max-brightness = <255>;
- pwms = <&pwm2 0 50000>;
+ pwms = <&pwm2 0 50000 0>;
};
led-3 {
label = "blue";
max-brightness = <255>;
- pwms = <&pwm1 0 50000>;
+ pwms = <&pwm1 0 50000 0>;
};
};
};
@@ -505,24 +505,18 @@ &pcie {
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
};
&pwm2 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
- status = "okay";
};
&pwm6 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
- status = "okay";
};
®_arm {
--
2.43.0