> On 12/04/2023 05:30, Stanley Chang wrote:
> > Add a new 'snps,global-regs-starting-offset' DT to dwc3 core to remap
> > the global register start address
> >
> > The RTK DHC SoCs were designed the global register address offset at
> > 0x8100. The default address is at DWC3_GLOBALS_REGS_START (0xc100).
> > Therefore, add the property of device-tree to adjust this start address.
> >
> > Signed-off-by: Stanley Chang <[email protected]>
>
> Please use scripts/get_maintainers.pl to get a list of necessary people and lists
> to CC. It might happen, that command when run on an older kernel, gives
> you outdated entries. Therefore please be sure you base your patches on
> recent Linux kernel.
>
> Since you skipped lists used in automated check, that's
> unfortunately: NAK
>
>
> > ---
> > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 7 +++++++
> > 1 file changed, 7 insertions(+)
> Best regards,
> Krzysztof
>
>
CC more maintainers by using scripts/get_maintainers.pl
Thanks,
Stanley
On 12/04/2023 13:11, Stanley Chang[昌育德] wrote:
>> On 12/04/2023 05:30, Stanley Chang wrote:
>>> Add a new 'snps,global-regs-starting-offset' DT to dwc3 core to remap
>>> the global register start address
>>>
>>> The RTK DHC SoCs were designed the global register address offset at
>>> 0x8100. The default address is at DWC3_GLOBALS_REGS_START (0xc100).
>>> Therefore, add the property of device-tree to adjust this start address.
>>>
>>> Signed-off-by: Stanley Chang <[email protected]>
>>
>> Please use scripts/get_maintainers.pl to get a list of necessary people and lists
>> to CC. It might happen, that command when run on an older kernel, gives
>> you outdated entries. Therefore please be sure you base your patches on
>> recent Linux kernel.
>>
>> Since you skipped lists used in automated check, that's
>> unfortunately: NAK
>>
>>
>>> ---
>>> Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 7 +++++++
>>> 1 file changed, 7 insertions(+)
>> Best regards,
>> Krzysztof
>>
>>
> CC more maintainers by using scripts/get_maintainers.pl
This does not work like this. It has to appear in the patchwork and be
tested by automated tools. Please resend.
Best regards,
Krzysztof