This is the start of the stable review cycle for the 3.18.50 release.
There are 124 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat Apr 22 06:35:33 UTC 2017.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.50-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 3.18.50-rc1
Linus Torvalds <[email protected]>
give up on gcc ilog2() constant optimizations
James Hogan <[email protected]>
metag/usercopy: Add missing fixups
James Hogan <[email protected]>
metag/usercopy: Fix src fixup in from user rapf loops
James Hogan <[email protected]>
metag/usercopy: Set flags before ADDZ
James Hogan <[email protected]>
metag/usercopy: Zero rest of buffer from copy_from_user
James Hogan <[email protected]>
metag/usercopy: Add early abort to copy_to_user
James Hogan <[email protected]>
metag/usercopy: Fix alignment error checking
James Hogan <[email protected]>
metag/usercopy: Drop unused macros
Huacai Chen <[email protected]>
MIPS: Flush wrong invalid FTLB entry for huge page
Wei Yongjun <[email protected]>
ring-buffer: Fix return value check in test_ringbuffer()
Chris Salls <[email protected]>
mm/mempolicy.c: fix error handling in set_mempolicy and mbind.
Rafał Miłecki <[email protected]>
mtd: bcm47xxpart: fix parsing first block after aligned TRX
Naoya Horiguchi <[email protected]>
mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
Bjorn Andersson <[email protected]>
pinctrl: qcom: Don't clear status bit on irq_unmask
Ladi Prosek <[email protected]>
virtio_balloon: init 1st buffer in stats vq
Mauricio Faria de Oliveira <[email protected]>
block: allow WRITE_SAME commands with the SG_IO ioctl
Henrik Ingo <[email protected]>
uvcvideo: uvc_scan_fallback() for webcams with broken chain
Gabriel Krisman Bertazi <[email protected]>
serial: 8250_pci: Detach low-level driver during PCI error recovery
Joerg Roedel <[email protected]>
ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
Josh Poimboeuf <[email protected]>
ACPI: Fix incompatibility with mcount-based function graph tracing
Darrick J. Wong <[email protected]>
xfs: clear _XBF_PAGES from buffers when readahead page
Eric Sandeen <[email protected]>
xfs: fix up xfs_swap_extent_forks inline extent handling
Darrick J. Wong <[email protected]>
xfs: don't allow di_size with high bit set
Todd Fujinaka <[email protected]>
igb: add i211 to i210 PHY workaround
Chris J Arges <[email protected]>
igb: Workaround for igb i210 firmware issue
Koos Vriezen <[email protected]>
iommu/vt-d: Fix NULL pointer dereference in device_to_iommu
Adrian Hunter <[email protected]>
mmc: sdhci: Do not disable interrupts while waiting for clock
Eric Biggers <[email protected]>
ext4: mark inode dirty after converting inline directory
Michael Engl <[email protected]>
iio: adc: ti_am335x_adc: fix fifo overrun recovery
Johan Hovold <[email protected]>
USB: usbtmc: add missing endpoint sanity check
Johan Hovold <[email protected]>
uwb: i1480-dfu: fix NULL-deref at probe
Johan Hovold <[email protected]>
uwb: hwa-rc: fix NULL-deref at probe
Johan Hovold <[email protected]>
mmc: ushc: fix NULL-deref at probe
Eric Dumazet <[email protected]>
tcp: initialize icsk_ack.lrcvtime at session start time
Daniel Borkmann <[email protected]>
socket, bpf: fix sk_filter use after free in sk_clone_lock
Andrey Ulanov <[email protected]>
net: unix: properly re-increment inflight counter of GC discarded candidates
Eric Dumazet <[email protected]>
net: properly release sk_frag.page
Florian Fainelli <[email protected]>
net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabled
Maor Gottlieb <[email protected]>
net/mlx5: Increase number of max QPs in default profile
Oliver Neukum <[email protected]>
ACM gadget: fix endianness in notifications
Johan Hovold <[email protected]>
Input: sur40 - validate number of endpoints before using them
Johan Hovold <[email protected]>
Input: kbtab - validate number of endpoints before using them
Johan Hovold <[email protected]>
Input: cm109 - validate number of endpoints before using them
Johan Hovold <[email protected]>
Input: yealink - validate number of endpoints before using them
Johan Hovold <[email protected]>
Input: hanwang - validate number of endpoints before using them
Johan Hovold <[email protected]>
Input: ims-pcu - validate number of endpoints before using them
Johan Hovold <[email protected]>
Input: iforce - validate number of endpoints before using them
Kai-Heng Feng <[email protected]>
Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000
Eric Dumazet <[email protected]>
ipv4: provide stronger user input validation in nl_fib_input()
Tahsin Erdogan <[email protected]>
percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages
Johan Hovold <[email protected]>
isdn/gigaset: fix NULL-deref at probe
Max Lohrmann <[email protected]>
target: Fix VERIFY_16 handling in sbc_parse_cdb
Shaohua Li <[email protected]>
md/raid1/10: fix potential deadlock
Peter Zijlstra <[email protected]>
perf/core: Fix event inheritance on fork()
Marc Zyngier <[email protected]>
arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region
David Hildenbrand <[email protected]>
KVM: kvm_io_bus_unregister_dev() should never fail
Peter Xu <[email protected]>
KVM: x86: clear bus pointer when destroyed
Thomas Huth <[email protected]>
KVM: PPC: Book3S PR: Fix illegal opcode emulation
Roman Mashak <[email protected]>
net sched actions: decrement module reference count after table flush.
Marcelo Ricardo Leitner <[email protected]>
sctp: deny peeloff operation on asocs with threads sleeping on it
Mantas M <[email protected]>
net: ipv6: check route protocol when deleting routes
Ben Hutchings <[email protected]>
catc: Use heap buffer for memory size test
Ben Hutchings <[email protected]>
catc: Combine failure cleanup code in catc_probe()
Ben Hutchings <[email protected]>
rtl8150: Use heap buffers for all register access
Ben Hutchings <[email protected]>
pegasus: Use heap buffers for all register access
Omar Sandoval <[email protected]>
virtio-console: avoid DMA from stack
Stefan Brüns <[email protected]>
dvb-usb-firmware: don't do DMA on stack
Mauro Carvalho Chehab <[email protected]>
dvb-usb: don't use stack for firmware load
Kees Cook <[email protected]>
mm: Tighten x86 /dev/mem with zeroing reads
Thierry Reding <[email protected]>
rtc: tegra: Implement clock handling
Lee, Chun-Yi <[email protected]>
platform/x86: acer-wmi: setup accelerometer when machine has appropriate notify event
Arnd Bergmann <[email protected]>
dvb-usb-v2: avoid use-after-free
Herbert Xu <[email protected]>
crypto: ahash - Fix EINPROGRESS notification callback
Benjamin Herrenschmidt <[email protected]>
powerpc: Disable HFSCR[TM] if TM is not supported
Minchan Kim <[email protected]>
zram: do not use copy_page with non-page aligned address
Richard Genoud <[email protected]>
tty/serial: atmel: fix race condition (TX+DMA)
Horia Geantă <[email protected]>
crypto: caam - fix RNG deinstantiation error checking
Ankur Arora <[email protected]>
xen/acpi: upload PM state from init-domain to Xen
John Garry <[email protected]>
scsi: libsas: fix ata xfer length
peter chang <[email protected]>
scsi: sg: check length passed to SG_NEXT_CMD_LEN
Chris Leech <[email protected]>
scsi: libiscsi: add lock around task lists to fix list corruption regression
Anton Blanchard <[email protected]>
scsi: lpfc: Add shutdown method for kexec
Nicholas Bellinger <[email protected]>
target/pscsi: Fix TYPE_TAPE + TYPE_MEDIMUM_CHANGER export
Michael Ellerman <[email protected]>
powerpc/boot: Fix zImage TOC alignment
Paul Mackerras <[email protected]>
powerpc: Don't try to fix up misaligned load-with-reservation instructions
Frederic Barrat <[email protected]>
powerpc/mm: Add missing global TLB invalidate if cxl is active
Takashi Iwai <[email protected]>
ALSA: seq: Fix race during FIFO resize
Takashi Iwai <[email protected]>
ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()
Uwe Kleine-König <[email protected]>
rtc: s35390a: improve irq handling
Uwe Kleine-König <[email protected]>
rtc: s35390a: implement reset routine as suggested by the reference
Uwe Kleine-König <[email protected]>
rtc: s35390a: make sure all members in the output are set
Uwe Kleine-König <[email protected]>
rtc: s35390a: fix reading out alarm
Vitaly Kuznetsov <[email protected]>
Drivers: hv: balloon: don't crash when memory is added in non-sorted order
[email protected] <[email protected]>
ptrace: fix PTRACE_LISTEN race corrupting task->state
Jan-Marek Glogowski <[email protected]>
Reset TreeId to zero on SMB2 TREE_CONNECT
Heiko Carstens <[email protected]>
s390/uaccess: get_user() should zero on failure (again)
Marcelo Henrique Cerri <[email protected]>
s390/decompressor: fix initrd corruption caused by bss clear
Dave Martin <[email protected]>
metag/ptrace: Reject partial NT_METAG_RPIPE writes
Dave Martin <[email protected]>
metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS
Dave Martin <[email protected]>
metag/ptrace: Preserve previous registers for short regset write
Dave Martin <[email protected]>
sparc/ptrace: Preserve previous registers for short regset write
Dave Martin <[email protected]>
mips/ptrace: Preserve previous registers for short regset write
Dave Martin <[email protected]>
c6x/ptrace: Remove useless PTRACE_SETREGSET implementation
Li Qiang <[email protected]>
drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
Thomas Hellstrom <[email protected]>
drm/vmwgfx: Remove getparam error message
Thomas Hellstrom <[email protected]>
drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
Murray McAllister <[email protected]>
drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
Murray McAllister <[email protected]>
drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
Thomas Hellstrom <[email protected]>
drm/vmwgfx: Type-check lookups of fence objects
Paolo Bonzini <[email protected]>
kvm: fix page struct leak in handle_vmon
Amit Pundir <[email protected]>
Revert "ARM: 8457/1: psci-smp is built only for SMP"
Max Bires <[email protected]>
char: lack of bool string made CONFIG_DEVPORT always on
Geert Uytterhoeven <[email protected]>
char: Drop bogus dependency of DEVPORT on !M68K
Steven Rostedt (VMware) <[email protected]>
ftrace: Fix removing of second function probe
Juergen Gross <[email protected]>
xen, fbfront: fix connecting to backend
Martin K. Petersen <[email protected]>
scsi: sd: Fix capacity calculation with 32-bit sector_t
Martin K. Petersen <[email protected]>
scsi: sr: Sanity check returned mode data
Nicholas Bellinger <[email protected]>
iscsi-target: Drop work-around for legacy GlobalSAN initiator
Nicholas Bellinger <[email protected]>
iscsi-target: Fix TMR reference leak during session shutdown
Mathias Krause <[email protected]>
x86/vdso: Ensure vdso32_enabled gets set to valid values only
Thomas Gleixner <[email protected]>
x86/vdso: Plug race between mapping and ELF header setup
Peter Zijlstra <[email protected]>
perf/x86: Avoid exposing wrong/stale data in intel_pmu_lbr_read_32()
Cameron Gutman <[email protected]>
Input: xpad - add support for Razer Wildcat gamepad
Germano Percossi <[email protected]>
CIFS: store results of cifs_reopen_file to avoid infinite wait
-------------
Diffstat:
Makefile | 4 +-
arch/arm/include/asm/psci.h | 2 +-
arch/arm/kvm/mmu.c | 3 +
arch/c6x/kernel/ptrace.c | 41 ----
arch/metag/include/asm/uaccess.h | 15 +-
arch/metag/kernel/ptrace.c | 19 +-
arch/metag/lib/usercopy.c | 312 ++++++++++---------------
arch/mips/kernel/ptrace.c | 3 +-
arch/mips/mm/tlbex.c | 25 +-
arch/powerpc/boot/zImage.lds.S | 1 +
arch/powerpc/kernel/align.c | 27 ++-
arch/powerpc/kernel/setup_64.c | 9 +
arch/powerpc/kvm/emulate.c | 1 -
arch/powerpc/mm/hash_native_64.c | 7 +-
arch/s390/boot/compressed/misc.c | 35 +--
arch/s390/include/asm/uaccess.h | 2 +-
arch/sparc/kernel/ptrace_64.c | 2 +-
arch/x86/include/asm/elf.h | 2 +-
arch/x86/kernel/cpu/perf_event_intel_lbr.c | 2 +
arch/x86/kvm/vmx.c | 10 +-
arch/x86/mm/init.c | 40 +++-
arch/x86/vdso/vdso32-setup.c | 11 +-
block/scsi_ioctl.c | 3 +
crypto/ahash.c | 79 ++++---
drivers/acpi/Makefile | 1 -
drivers/acpi/acpi_platform.c | 8 +-
drivers/block/zram/zram_drv.c | 6 +-
drivers/char/Kconfig | 6 +-
drivers/char/mem.c | 82 ++++---
drivers/char/virtio_console.c | 12 +-
drivers/crypto/caam/ctrl.c | 3 +-
drivers/gpu/drm/ttm/ttm_object.c | 10 +-
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c | 79 ++++---
drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 4 +-
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 4 +-
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 31 ++-
drivers/hv/hv_balloon.c | 4 +-
drivers/iio/adc/ti_am335x_adc.c | 13 +-
drivers/input/joystick/iforce/iforce-usb.c | 3 +
drivers/input/joystick/xpad.c | 2 +
drivers/input/misc/cm109.c | 4 +
drivers/input/misc/ims-pcu.c | 4 +
drivers/input/misc/yealink.c | 4 +
drivers/input/serio/i8042-x86ia64io.h | 7 +
drivers/input/tablet/hanwang.c | 3 +
drivers/input/tablet/kbtab.c | 3 +
drivers/input/touchscreen/sur40.c | 3 +
drivers/iommu/intel-iommu.c | 2 +-
drivers/isdn/gigaset/bas-gigaset.c | 3 +
drivers/md/raid10.c | 18 ++
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 10 +-
drivers/media/usb/dvb-usb/dvb-usb-firmware.c | 33 ++-
drivers/media/usb/uvc/uvc_driver.c | 118 +++++++++-
drivers/mmc/host/sdhci.c | 4 +-
drivers/mmc/host/ushc.c | 3 +
drivers/mtd/bcm47xxpart.c | 10 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 +-
drivers/net/ethernet/intel/igb/e1000_phy.c | 4 +
drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +-
drivers/net/usb/catc.c | 56 +++--
drivers/net/usb/pegasus.c | 29 ++-
drivers/net/usb/rtl8150.c | 34 ++-
drivers/pinctrl/qcom/pinctrl-msm.c | 4 -
drivers/platform/x86/acer-wmi.c | 22 +-
drivers/rtc/rtc-s35390a.c | 167 ++++++++++---
drivers/rtc/rtc-tegra.c | 28 ++-
drivers/scsi/libiscsi.c | 26 ++-
drivers/scsi/libsas/sas_ata.c | 2 +-
drivers/scsi/lpfc/lpfc_init.c | 1 +
drivers/scsi/sd.c | 20 +-
drivers/scsi/sg.c | 2 +
drivers/scsi/sr.c | 6 +-
drivers/target/iscsi/iscsi_target_parameters.c | 16 --
drivers/target/iscsi/iscsi_target_util.c | 12 +-
drivers/target/target_core_pscsi.c | 47 +---
drivers/target/target_core_sbc.c | 10 +-
drivers/tty/serial/8250/8250_pci.c | 23 +-
drivers/tty/serial/atmel_serial.c | 5 +
drivers/usb/class/usbtmc.c | 7 +
drivers/usb/gadget/function/f_acm.c | 4 +-
drivers/uwb/hwa-rc.c | 3 +
drivers/uwb/i1480/dfu/usb.c | 3 +
drivers/video/fbdev/xen-fbfront.c | 4 +-
drivers/virtio/virtio_balloon.c | 2 +
drivers/xen/xen-acpi-processor.c | 34 ++-
fs/cifs/file.c | 6 +-
fs/cifs/smb2pdu.c | 4 +
fs/ext4/inline.c | 5 +-
fs/xfs/libxfs/xfs_inode_buf.c | 8 +
fs/xfs/xfs_bmap_util.c | 7 +-
fs/xfs/xfs_buf.c | 1 +
include/crypto/internal/hash.h | 10 +
include/drm/ttm/ttm_object.h | 5 +-
include/linux/kvm_host.h | 4 +-
include/linux/log2.h | 13 +-
include/scsi/libiscsi.h | 1 +
kernel/events/core.c | 5 +-
kernel/ptrace.c | 14 +-
kernel/trace/ftrace.c | 20 +-
kernel/trace/ring_buffer.c | 8 +-
mm/hugetlb.c | 6 +-
mm/mempolicy.c | 20 +-
mm/percpu.c | 5 +-
net/core/sock.c | 16 +-
net/ipv4/fib_frontend.c | 3 +-
net/ipv4/tcp_input.c | 2 +-
net/ipv4/tcp_minisocks.c | 1 +
net/ipv6/route.c | 2 +
net/sched/act_api.c | 5 +-
net/sctp/socket.c | 8 +-
net/unix/garbage.c | 18 +-
sound/core/seq/seq_clientmgr.c | 1 +
sound/core/seq/seq_fifo.c | 7 +
sound/core/seq/seq_memory.c | 17 +-
sound/core/seq/seq_memory.h | 1 +
virt/kvm/eventfd.c | 3 +-
virt/kvm/kvm_main.c | 40 +++-
117 files changed, 1293 insertions(+), 704 deletions(-)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juergen Gross <[email protected]>
commit 9121b15b5628b38b4695282dc18c553440e0f79b upstream.
Connecting to the backend isn't working reliably in xen-fbfront: in
case XenbusStateInitWait of the backend has been missed the backend
transition to XenbusStateConnected will trigger the connected state
only without doing the actions required when the backend has
connected.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/xen-fbfront.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/video/fbdev/xen-fbfront.c
+++ b/drivers/video/fbdev/xen-fbfront.c
@@ -644,7 +644,6 @@ static void xenfb_backend_changed(struct
break;
case XenbusStateInitWait:
-InitWait:
xenbus_switch_state(dev, XenbusStateConnected);
break;
@@ -655,7 +654,8 @@ InitWait:
* get Connected twice here.
*/
if (dev->state != XenbusStateConnected)
- goto InitWait; /* no InitWait seen yet, fudge it */
+ /* no InitWait seen yet, fudge it */
+ xenbus_switch_state(dev, XenbusStateConnected);
if (xenbus_scanf(XBT_NIL, info->xbdev->otherend,
"request-update", "%d", &val) < 0)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Germano Percossi <[email protected]>
commit 1fa839b4986d648b907d117275869a0e46c324b9 upstream.
This fixes Continuous Availability when errors during
file reopen are encountered.
cifs_user_readv and cifs_user_writev would wait for ever if
results of cifs_reopen_file are not stored and for later inspection.
In fact, results are checked and, in case of errors, a chain
of function calls leading to reads and writes to be scheduled in
a separate thread is skipped.
These threads will wake up the corresponding waiters once reads
and writes are done.
However, given the return value is not stored, when rc is checked
for errors a previous one (always zero) is inspected instead.
This leads to pending reads/writes added to the list, making
cifs_user_readv and cifs_user_writev wait for ever.
Signed-off-by: Germano Percossi <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/file.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2542,7 +2542,7 @@ cifs_write_from_iter(loff_t offset, size
wdata->credits = credits;
if (!wdata->cfile->invalidHandle ||
- !cifs_reopen_file(wdata->cfile, false))
+ !(rc = cifs_reopen_file(wdata->cfile, false)))
rc = server->ops->async_writev(wdata,
cifs_uncached_writedata_release);
if (rc) {
@@ -2977,7 +2977,7 @@ cifs_send_async_read(loff_t offset, size
rdata->credits = credits;
if (!rdata->cfile->invalidHandle ||
- !cifs_reopen_file(rdata->cfile, true))
+ !(rc = cifs_reopen_file(rdata->cfile, true)))
rc = server->ops->async_readv(rdata);
error:
if (rc) {
@@ -3564,7 +3564,7 @@ static int cifs_readpages(struct file *f
}
if (!rdata->cfile->invalidHandle ||
- !cifs_reopen_file(rdata->cfile, true))
+ !(rc = cifs_reopen_file(rdata->cfile, true)))
rc = server->ops->async_readv(rdata);
if (rc) {
add_credits_and_wake_if(server, rdata->credits, 0);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) <[email protected]>
commit 82cc4fc2e70ec5baeff8f776f2773abc8b2cc0ae upstream.
When two function probes are added to set_ftrace_filter, and then one of
them is removed, the update to the function locations is not performed, and
the record keeping of the function states are corrupted, and causes an
ftrace_bug() to occur.
This is easily reproducable by adding two probes, removing one, and then
adding it back again.
# cd /sys/kernel/debug/tracing
# echo schedule:traceoff > set_ftrace_filter
# echo do_IRQ:traceoff > set_ftrace_filter
# echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter
# echo do_IRQ:traceoff > set_ftrace_filter
Causes:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220
Modules linked in: [...]
CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
Call Trace:
dump_stack+0x68/0x9f
__warn+0x111/0x130
? trace_irq_work_interrupt+0xa0/0xa0
warn_slowpath_null+0x1d/0x20
ftrace_get_addr_curr+0x143/0x220
? __fentry__+0x10/0x10
ftrace_replace_code+0xe3/0x4f0
? ftrace_int3_handler+0x90/0x90
? printk+0x99/0xb5
? 0xffffffff81000000
ftrace_modify_all_code+0x97/0x110
arch_ftrace_update_code+0x10/0x20
ftrace_run_update_code+0x1c/0x60
ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0
register_ftrace_function_probe+0x4b6/0x590
? ftrace_startup+0x310/0x310
? debug_lockdep_rcu_enabled.part.4+0x1a/0x30
? update_stack_state+0x88/0x110
? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
? preempt_count_sub+0x18/0xd0
? mutex_lock_nested+0x104/0x800
? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
? __unwind_start+0x1c0/0x1c0
? _mutex_lock_nest_lock+0x800/0x800
ftrace_trace_probe_callback.isra.3+0xc0/0x130
? func_set_flag+0xe0/0xe0
? __lock_acquire+0x642/0x1790
? __might_fault+0x1e/0x20
? trace_get_user+0x398/0x470
? strcmp+0x35/0x60
ftrace_trace_onoff_callback+0x48/0x70
ftrace_regex_write.isra.43.part.44+0x251/0x320
? match_records+0x420/0x420
ftrace_filter_write+0x2b/0x30
__vfs_write+0xd7/0x330
? do_loop_readv_writev+0x120/0x120
? locks_remove_posix+0x90/0x2f0
? do_lock_file_wait+0x160/0x160
? __lock_is_held+0x93/0x100
? rcu_read_lock_sched_held+0x5c/0xb0
? preempt_count_sub+0x18/0xd0
? __sb_start_write+0x10a/0x230
? vfs_write+0x222/0x240
vfs_write+0xef/0x240
SyS_write+0xab/0x130
? SyS_read+0x130/0x130
? trace_hardirqs_on_caller+0x182/0x280
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x18/0xad
RIP: 0033:0x7fe61c157c30
RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30
RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001
RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700
R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400
R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c
? trace_hardirqs_off_caller+0xc0/0x110
---[ end trace 99fa09b3d9869c2c ]---
Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150)
Fixes: 59df055f1991 ("ftrace: trace different functions with a different tracer")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ftrace.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3408,23 +3408,24 @@ static void __enable_ftrace_function_pro
ftrace_probe_registered = 1;
}
-static void __disable_ftrace_function_probe(void)
+static bool __disable_ftrace_function_probe(void)
{
int i;
if (!ftrace_probe_registered)
- return;
+ return false;
for (i = 0; i < FTRACE_FUNC_HASHSIZE; i++) {
struct hlist_head *hhd = &ftrace_func_hash[i];
if (hhd->first)
- return;
+ return false;
}
/* no more funcs left */
ftrace_shutdown(&trace_probe_ops, 0);
ftrace_probe_registered = 0;
+ return true;
}
@@ -3550,6 +3551,7 @@ static void
__unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
void *data, int flags)
{
+ struct ftrace_ops_hash old_hash_ops;
struct ftrace_func_entry *rec_entry;
struct ftrace_func_probe *entry;
struct ftrace_func_probe *p;
@@ -3563,6 +3565,7 @@ __unregister_ftrace_function_probe(char
int i, len = 0;
char *search;
int ret;
+ bool disabled;
if (glob && (strcmp(glob, "*") == 0 || !strlen(glob)))
glob = NULL;
@@ -3579,6 +3582,10 @@ __unregister_ftrace_function_probe(char
mutex_lock(&trace_probe_ops.func_hash->regex_lock);
+ old_hash_ops.filter_hash = old_hash;
+ /* Probes only have filters */
+ old_hash_ops.notrace_hash = NULL;
+
hash = alloc_and_copy_ftrace_hash(FTRACE_HASH_DEFAULT_BITS, *orig_hash);
if (!hash)
/* Hmm, should report this somehow */
@@ -3616,12 +3623,17 @@ __unregister_ftrace_function_probe(char
}
}
mutex_lock(&ftrace_lock);
- __disable_ftrace_function_probe();
+ disabled = __disable_ftrace_function_probe();
/*
* Remove after the disable is called. Otherwise, if the last
* probe is removed, a null hash means *all enabled*.
*/
ret = ftrace_hash_move(&trace_probe_ops, 1, orig_hash, hash);
+
+ /* still need to update the function call sites */
+ if (ftrace_enabled && !disabled)
+ ftrace_run_modify_code(&trace_probe_ops, FTRACE_UPDATE_CALLS,
+ &old_hash_ops);
synchronize_sched();
if (!ret)
free_ftrace_hash_rcu(old_hash);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Bires <[email protected]>
commit f2cfa58b136e4b06a9b9db7af5ef62fbb5992f62 upstream.
Without a bool string present, using "# CONFIG_DEVPORT is not set" in
defconfig files would not actually unset devport. This esnured that
/dev/port was always on, but there are reasons a user may wish to
disable it (smaller kernel, attack surface reduction) if it's not being
used. Adding a message here in order to make this user visible.
Signed-off-by: Max Bires <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/Kconfig | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -574,9 +574,12 @@ config TELCLOCK
controlling the behavior of this hardware.
config DEVPORT
- bool
+ bool "/dev/port character device"
depends on ISA || PCI
default y
+ help
+ Say Y here if you want to support the /dev/port device. The /dev/port
+ device is similar to /dev/mem, but for I/O ports.
source "drivers/s390/char/Kconfig"
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Martin <[email protected]>
commit 7195ee3120d878259e8d94a5d9f808116f34d5ea upstream.
It's not clear what behaviour is sensible when doing partial write of
NT_METAG_RPIPE, so just don't bother.
This patch assumes that userspace will never rely on a partial SETREGSET
in this case, since it's not clear what should happen anyway.
Signed-off-by: Dave Martin <[email protected]>
Acked-by: James Hogan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/kernel/ptrace.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/metag/kernel/ptrace.c
+++ b/arch/metag/kernel/ptrace.c
@@ -253,6 +253,8 @@ int metag_rp_state_copyin(struct pt_regs
unsigned long long *ptr;
int ret, i;
+ if (count < 4*13)
+ return -EINVAL;
/* Read the entire pipeline before making any changes */
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&rp, 0, 4*13);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Hellstrom <[email protected]>
commit f7652afa8eadb416b23eb57dec6f158529942041 upstream.
A malicious caller could otherwise hand over handles to other objects
causing all sorts of interesting problems.
Testing done: Ran a Fedora 25 desktop using both Xorg and
gnome-shell/Wayland.
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c | 75 ++++++++++++++++++++++------------
1 file changed, 49 insertions(+), 26 deletions(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -539,7 +539,7 @@ int vmw_fence_create(struct vmw_fence_ma
struct vmw_fence_obj **p_fence)
{
struct vmw_fence_obj *fence;
- int ret;
+ int ret;
fence = kzalloc(sizeof(*fence), GFP_KERNEL);
if (unlikely(fence == NULL))
@@ -702,6 +702,41 @@ void vmw_fence_fifo_up(struct vmw_fence_
}
+/**
+ * vmw_fence_obj_lookup - Look up a user-space fence object
+ *
+ * @tfile: A struct ttm_object_file identifying the caller.
+ * @handle: A handle identifying the fence object.
+ * @return: A struct vmw_user_fence base ttm object on success or
+ * an error pointer on failure.
+ *
+ * The fence object is looked up and type-checked. The caller needs
+ * to have opened the fence object first, but since that happens on
+ * creation and fence objects aren't shareable, that's not an
+ * issue currently.
+ */
+static struct ttm_base_object *
+vmw_fence_obj_lookup(struct ttm_object_file *tfile, u32 handle)
+{
+ struct ttm_base_object *base = ttm_base_object_lookup(tfile, handle);
+
+ if (!base) {
+ pr_err("Invalid fence object handle 0x%08lx.\n",
+ (unsigned long)handle);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (base->refcount_release != vmw_user_fence_base_release) {
+ pr_err("Invalid fence object handle 0x%08lx.\n",
+ (unsigned long)handle);
+ ttm_base_object_unref(&base);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return base;
+}
+
+
int vmw_fence_obj_wait_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
@@ -727,13 +762,9 @@ int vmw_fence_obj_wait_ioctl(struct drm_
arg->kernel_cookie = jiffies + wait_timeout;
}
- base = ttm_base_object_lookup(tfile, arg->handle);
- if (unlikely(base == NULL)) {
- printk(KERN_ERR "Wait invalid fence object handle "
- "0x%08lx.\n",
- (unsigned long)arg->handle);
- return -EINVAL;
- }
+ base = vmw_fence_obj_lookup(tfile, arg->handle);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
fence = &(container_of(base, struct vmw_user_fence, base)->fence);
@@ -772,13 +803,9 @@ int vmw_fence_obj_signaled_ioctl(struct
struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
struct vmw_private *dev_priv = vmw_priv(dev);
- base = ttm_base_object_lookup(tfile, arg->handle);
- if (unlikely(base == NULL)) {
- printk(KERN_ERR "Fence signaled invalid fence object handle "
- "0x%08lx.\n",
- (unsigned long)arg->handle);
- return -EINVAL;
- }
+ base = vmw_fence_obj_lookup(tfile, arg->handle);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
fence = &(container_of(base, struct vmw_user_fence, base)->fence);
fman = fman_from_fence(fence);
@@ -1093,6 +1120,7 @@ int vmw_fence_event_ioctl(struct drm_dev
(struct drm_vmw_fence_event_arg *) data;
struct vmw_fence_obj *fence = NULL;
struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
+ struct ttm_object_file *tfile = vmw_fp->tfile;
struct drm_vmw_fence_rep __user *user_fence_rep =
(struct drm_vmw_fence_rep __user *)(unsigned long)
arg->fence_rep;
@@ -1106,15 +1134,11 @@ int vmw_fence_event_ioctl(struct drm_dev
*/
if (arg->handle) {
struct ttm_base_object *base =
- ttm_base_object_lookup_for_ref(dev_priv->tdev,
- arg->handle);
+ vmw_fence_obj_lookup(tfile, arg->handle);
+
+ if (IS_ERR(base))
+ return PTR_ERR(base);
- if (unlikely(base == NULL)) {
- DRM_ERROR("Fence event invalid fence object handle "
- "0x%08lx.\n",
- (unsigned long)arg->handle);
- return -EINVAL;
- }
fence = &(container_of(base, struct vmw_user_fence,
base)->fence);
(void) vmw_fence_obj_reference(fence);
@@ -1122,7 +1146,7 @@ int vmw_fence_event_ioctl(struct drm_dev
if (user_fence_rep != NULL) {
bool existed;
- ret = ttm_ref_object_add(vmw_fp->tfile, base,
+ ret = ttm_ref_object_add(tfile, base,
TTM_REF_USAGE, &existed);
if (unlikely(ret != 0)) {
DRM_ERROR("Failed to reference a fence "
@@ -1166,8 +1190,7 @@ int vmw_fence_event_ioctl(struct drm_dev
return 0;
out_no_create:
if (user_fence_rep != NULL)
- ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
- handle, TTM_REF_USAGE);
+ ttm_ref_object_base_unref(tfile, handle, TTM_REF_USAGE);
out_no_ref_obj:
vmw_fence_obj_unreference(&fence);
return ret;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Martin <[email protected]>
commit a78ce80d2c9178351b34d78fec805140c29c193e upstream.
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <[email protected]>
Acked-by: James Hogan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/kernel/ptrace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/metag/kernel/ptrace.c
+++ b/arch/metag/kernel/ptrace.c
@@ -303,7 +303,7 @@ static int metag_tls_set(struct task_str
const void *kbuf, const void __user *ubuf)
{
int ret;
- void __user *tls;
+ void __user *tls = target->thread.tls_ptr;
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1);
if (ret)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit f2200ac311302fcdca6556fd0c5127eab6c65a3e upstream.
When the perf_branch_entry::{in_tx,abort,cycles} fields were added,
intel_pmu_lbr_read_32() wasn't updated to initialize them.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 135c5612c460 ("perf/x86/intel: Support Haswell/v4 LBR format")
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/perf_event_intel_lbr.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
@@ -268,6 +268,8 @@ static void intel_pmu_lbr_read_32(struct
cpuc->lbr_entries[i].to = msr_lastbranch.to;
cpuc->lbr_entries[i].mispred = 0;
cpuc->lbr_entries[i].predicted = 0;
+ cpuc->lbr_entries[i].in_tx = 0;
+ cpuc->lbr_entries[i].abort = 0;
cpuc->lbr_entries[i].reserved = 0;
}
cpuc->lbr_stack.nr = i;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Hellstrom <[email protected]>
commit fe25deb7737ce6c0879ccf79c99fa1221d428bf2 upstream.
Previously, when a surface was opened using a legacy (non prime) handle,
it was verified to have been created by a client in the same master realm.
Relax this so that opening is also allowed recursively if the client
already has the surface open.
This works around a regression in svga mesa where opening of a shared
surface is used recursively to obtain surface information.
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/ttm/ttm_object.c | 10 +++++++---
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c | 6 ++----
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 4 ++--
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 22 +++++++++-------------
include/drm/ttm/ttm_object.h | 5 ++++-
5 files changed, 24 insertions(+), 23 deletions(-)
--- a/drivers/gpu/drm/ttm/ttm_object.c
+++ b/drivers/gpu/drm/ttm/ttm_object.c
@@ -179,7 +179,7 @@ int ttm_base_object_init(struct ttm_obje
if (unlikely(ret != 0))
goto out_err0;
- ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL);
+ ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL, false);
if (unlikely(ret != 0))
goto out_err1;
@@ -318,7 +318,8 @@ EXPORT_SYMBOL(ttm_ref_object_exists);
int ttm_ref_object_add(struct ttm_object_file *tfile,
struct ttm_base_object *base,
- enum ttm_ref_type ref_type, bool *existed)
+ enum ttm_ref_type ref_type, bool *existed,
+ bool require_existed)
{
struct drm_open_hash *ht = &tfile->ref_hash[ref_type];
struct ttm_ref_object *ref;
@@ -345,6 +346,9 @@ int ttm_ref_object_add(struct ttm_object
}
rcu_read_unlock();
+ if (require_existed)
+ return -EPERM;
+
ret = ttm_mem_global_alloc(mem_glob, sizeof(*ref),
false, false);
if (unlikely(ret != 0))
@@ -635,7 +639,7 @@ int ttm_prime_fd_to_handle(struct ttm_ob
prime = (struct ttm_prime_object *) dma_buf->priv;
base = &prime->base;
*handle = base->hash.key;
- ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL);
+ ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL, false);
dma_buf_put(dma_buf);
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -1144,10 +1144,8 @@ int vmw_fence_event_ioctl(struct drm_dev
(void) vmw_fence_obj_reference(fence);
if (user_fence_rep != NULL) {
- bool existed;
-
- ret = ttm_ref_object_add(tfile, base,
- TTM_REF_USAGE, &existed);
+ ret = ttm_ref_object_add(vmw_fp->tfile, base,
+ TTM_REF_USAGE, NULL, false);
if (unlikely(ret != 0)) {
DRM_ERROR("Failed to reference a fence "
"object.\n");
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -588,7 +588,7 @@ static int vmw_user_dmabuf_synccpu_grab(
return ret;
ret = ttm_ref_object_add(tfile, &user_bo->prime.base,
- TTM_REF_SYNCCPU_WRITE, &existed);
+ TTM_REF_SYNCCPU_WRITE, &existed, false);
if (ret != 0 || existed)
ttm_bo_synccpu_write_release(&user_bo->dma.base);
@@ -764,7 +764,7 @@ int vmw_user_dmabuf_reference(struct ttm
*handle = user_bo->prime.base.hash.key;
return ttm_ref_object_add(tfile, &user_bo->prime.base,
- TTM_REF_USAGE, NULL);
+ TTM_REF_USAGE, NULL, false);
}
/*
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -895,17 +895,16 @@ vmw_surface_handle_reference(struct vmw_
uint32_t handle;
struct ttm_base_object *base;
int ret;
+ bool require_exist = false;
if (handle_type == DRM_VMW_HANDLE_PRIME) {
ret = ttm_prime_fd_to_handle(tfile, u_handle, &handle);
if (unlikely(ret != 0))
return ret;
} else {
- if (unlikely(drm_is_render_client(file_priv))) {
- DRM_ERROR("Render client refused legacy "
- "surface reference.\n");
- return -EACCES;
- }
+ if (unlikely(drm_is_render_client(file_priv)))
+ require_exist = true;
+
handle = u_handle;
}
@@ -927,17 +926,14 @@ vmw_surface_handle_reference(struct vmw_
/*
* Make sure the surface creator has the same
- * authenticating master.
+ * authenticating master, or is already registered with us.
*/
if (drm_is_primary_client(file_priv) &&
- user_srf->master != file_priv->master) {
- DRM_ERROR("Trying to reference surface outside of"
- " master domain.\n");
- ret = -EACCES;
- goto out_bad_resource;
- }
+ user_srf->master != file_priv->master)
+ require_exist = true;
- ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL);
+ ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL,
+ require_exist);
if (unlikely(ret != 0)) {
DRM_ERROR("Could not add a reference to a surface.\n");
goto out_bad_resource;
--- a/include/drm/ttm/ttm_object.h
+++ b/include/drm/ttm/ttm_object.h
@@ -229,6 +229,8 @@ extern void ttm_base_object_unref(struct
* @ref_type: The type of reference.
* @existed: Upon completion, indicates that an identical reference object
* already existed, and the refcount was upped on that object instead.
+ * @require_existed: Fail with -EPERM if an identical ref object didn't
+ * already exist.
*
* Checks that the base object is shareable and adds a ref object to it.
*
@@ -243,7 +245,8 @@ extern void ttm_base_object_unref(struct
*/
extern int ttm_ref_object_add(struct ttm_object_file *tfile,
struct ttm_base_object *base,
- enum ttm_ref_type ref_type, bool *existed);
+ enum ttm_ref_type ref_type, bool *existed,
+ bool require_existed);
extern bool ttm_ref_object_exists(struct ttm_object_file *tfile,
struct ttm_base_object *base);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <[email protected]>
commit 6fdc6dd90272ce7e75d744f71535cfbd8d77da81 upstream.
The vsyscall32 sysctl can racy against a concurrent fork when it switches
from disabled to enabled:
arch_setup_additional_pages()
if (vdso32_enabled)
--> No mapping
sysctl.vsysscall32()
--> vdso32_enabled = true
create_elf_tables()
ARCH_DLINFO_IA32
if (vdso32_enabled) {
--> Add VDSO entry with NULL pointer
Make ARCH_DLINFO_IA32 check whether the VDSO mapping has been set up for
the newly forked process or not.
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Andy Lutomirski <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Mathias Krause <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/elf.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -277,7 +277,7 @@ struct task_struct;
#define ARCH_DLINFO_IA32 \
do { \
- if (vdso32_enabled) { \
+ if (VDSO_CURRENT_BASE) { \
NEW_AUX_ENT(AT_SYSINFO, VDSO_ENTRY); \
NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE); \
} \
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit efb2ea770bb3b0f40007530bc8b0c22f36e1c5eb upstream.
This patch fixes a iscsi-target specific TMR reference leak
during session shutdown, that could occur when a TMR was
quiesced before the hand-off back to iscsi-target code
via transport_cmd_check_stop_to_fabric().
The reference leak happens because iscsit_free_cmd() was
incorrectly skipping the final target_put_sess_cmd() for
TMRs when transport_generic_free_cmd() returned zero because
the se_cmd->cmd_kref did not reach zero, due to the missing
se_cmd assignment in original code.
The result was iscsi_cmd and it's associated se_cmd memory
would be freed once se_sess->sess_cmd_map where released,
but the associated se_tmr_req was leaked and remained part
of se_device->dev_tmr_list.
This bug would manfiest itself as kernel paging request
OOPsen in core_tmr_lun_reset(), when a left-over se_tmr_req
attempted to dereference it's se_cmd pointer that had
already been released during normal session shutdown.
To address this bug, go ahead and treat ISCSI_OP_SCSI_CMD
and ISCSI_OP_SCSI_TMFUNC the same when there is an extra
se_cmd->cmd_kref to drop in iscsit_free_cmd(), and use
op_scsi to signal __iscsit_free_cmd() when the former
needs to clear any further iscsi related I/O state.
Reported-by: Rob Millner <[email protected]>
Cc: Rob Millner <[email protected]>
Reported-by: Chu Yuan Lin <[email protected]>
Cc: Chu Yuan Lin <[email protected]>
Tested-by: Chu Yuan Lin <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target_util.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -731,21 +731,23 @@ void iscsit_free_cmd(struct iscsi_cmd *c
{
struct se_cmd *se_cmd = NULL;
int rc;
+ bool op_scsi = false;
/*
* Determine if a struct se_cmd is associated with
* this struct iscsi_cmd.
*/
switch (cmd->iscsi_opcode) {
case ISCSI_OP_SCSI_CMD:
- se_cmd = &cmd->se_cmd;
- __iscsit_free_cmd(cmd, true, shutdown);
+ op_scsi = true;
/*
* Fallthrough
*/
case ISCSI_OP_SCSI_TMFUNC:
- rc = transport_generic_free_cmd(&cmd->se_cmd, shutdown);
- if (!rc && shutdown && se_cmd && se_cmd->se_sess) {
- __iscsit_free_cmd(cmd, true, shutdown);
+ se_cmd = &cmd->se_cmd;
+ __iscsit_free_cmd(cmd, op_scsi, shutdown);
+ rc = transport_generic_free_cmd(se_cmd, shutdown);
+ if (!rc && shutdown && se_cmd->se_sess) {
+ __iscsit_free_cmd(cmd, op_scsi, shutdown);
target_put_sess_cmd(se_cmd);
}
break;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Martin <[email protected]>
commit d3805c546b275c8cc7d40f759d029ae92c7175f2 upstream.
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sparc/kernel/ptrace_64.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -311,7 +311,7 @@ static int genregs64_set(struct task_str
}
if (!ret) {
- unsigned long y;
+ unsigned long y = regs->y;
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&y,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: [email protected] <[email protected]>
commit 5402e97af667e35e54177af8f6575518bf251d51 upstream.
In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against
__TASK_TRACED. If this races with the ptrace_unfreeze_traced at the end
of a PTRACE_LISTEN, this can wake the task /after/ the check against
__TASK_TRACED, but before the reset of state to TASK_TRACED. This
causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup
against TRACED while the task is still on the rq wake_list, corrupting
it.
Oleg said:
"The kernel can crash or this can lead to other hard-to-debug problems.
In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced()
assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the
contract. Obviusly it is very wrong to manipulate task->state if this
task is already running, or WAKING, or it sleeps again"
[[email protected]: coding-style fixes]
Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ben Segall <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/ptrace.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -144,11 +144,17 @@ static void ptrace_unfreeze_traced(struc
WARN_ON(!task->ptrace || task->parent != current);
+ /*
+ * PTRACE_LISTEN can allow ptrace_trap_notify to wake us up remotely.
+ * Recheck state under the lock to close this race.
+ */
spin_lock_irq(&task->sighand->siglock);
- if (__fatal_signal_pending(task))
- wake_up_state(task, __TASK_TRACED);
- else
- task->state = TASK_TRACED;
+ if (task->state == __TASK_TRACED) {
+ if (__fatal_signal_pending(task))
+ wake_up_state(task, __TASK_TRACED);
+ else
+ task->state = TASK_TRACED;
+ }
spin_unlock_irq(&task->sighand->siglock);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: peter chang <[email protected]>
commit bf33f87dd04c371ea33feb821b60d63d754e3124 upstream.
The user can control the size of the next command passed along, but the
value passed to the ioctl isn't checked against the usable max command
size.
Signed-off-by: Peter Chang <[email protected]>
Acked-by: Douglas Gilbert <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sg.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1017,6 +1017,8 @@ sg_ioctl(struct file *filp, unsigned int
result = get_user(val, ip);
if (result)
return result;
+ if (val > SG_MAX_CDB_SIZE)
+ return -ENOMEM;
sfp->next_cmd_len = (val > 0) ? val : 0;
return 0;
case SG_GET_VERSION_NUM:
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ankur Arora <[email protected]>
commit 1914f0cd203c941bba72f9452c8290324f1ef3dc upstream.
This was broken in commit cd979883b9ed ("xen/acpi-processor:
fix enabling interrupts on syscore_resume"). do_suspend (from
xen/manage.c) and thus xen_resume_notifier never get called on
the initial-domain at resume (it is if running as guest.)
The rationale for the breaking change was that upload_pm_data()
potentially does blocking work in syscore_resume(). This patch
addresses the original issue by scheduling upload_pm_data() to
execute in workqueue context.
Cc: Stanislaw Gruszka <[email protected]>
Based-on-patch-by: Konrad Wilk <[email protected]>
Reviewed-by: Konrad Rzeszutek Wilk <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: Ankur Arora <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/xen-acpi-processor.c | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)
--- a/drivers/xen/xen-acpi-processor.c
+++ b/drivers/xen/xen-acpi-processor.c
@@ -27,10 +27,10 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/syscore_ops.h>
#include <linux/acpi.h>
#include <acpi/processor.h>
#include <xen/xen.h>
-#include <xen/xen-ops.h>
#include <xen/interface/platform.h>
#include <asm/xen/hypercall.h>
@@ -466,15 +466,33 @@ static int xen_upload_processor_pm_data(
return rc;
}
-static int xen_acpi_processor_resume(struct notifier_block *nb,
- unsigned long action, void *data)
+static void xen_acpi_processor_resume_worker(struct work_struct *dummy)
{
+ int rc;
+
bitmap_zero(acpi_ids_done, nr_acpi_bits);
- return xen_upload_processor_pm_data();
+
+ rc = xen_upload_processor_pm_data();
+ if (rc != 0)
+ pr_info("ACPI data upload failed, error = %d\n", rc);
+}
+
+static void xen_acpi_processor_resume(void)
+{
+ static DECLARE_WORK(wq, xen_acpi_processor_resume_worker);
+
+ /*
+ * xen_upload_processor_pm_data() calls non-atomic code.
+ * However, the context for xen_acpi_processor_resume is syscore
+ * with only the boot CPU online and in an atomic context.
+ *
+ * So defer the upload for some point safer.
+ */
+ schedule_work(&wq);
}
-struct notifier_block xen_acpi_processor_resume_nb = {
- .notifier_call = xen_acpi_processor_resume,
+static struct syscore_ops xap_syscore_ops = {
+ .resume = xen_acpi_processor_resume,
};
static int __init xen_acpi_processor_init(void)
@@ -527,7 +545,7 @@ static int __init xen_acpi_processor_ini
if (rc)
goto err_unregister;
- xen_resume_notifier_register(&xen_acpi_processor_resume_nb);
+ register_syscore_ops(&xap_syscore_ops);
return 0;
err_unregister:
@@ -546,7 +564,7 @@ static void __exit xen_acpi_processor_ex
{
int i;
- xen_resume_notifier_unregister(&xen_acpi_processor_resume_nb);
+ unregister_syscore_ops(&xap_syscore_ops);
kfree(acpi_ids_done);
kfree(acpi_id_present);
kfree(acpi_id_cst_present);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Minchan Kim <[email protected]>
commit d72e9a7a93e4f8e9e52491921d99e0c8aa89eb4e upstream.
The copy_page is optimized memcpy for page-alinged address. If it is
used with non-page aligned address, it can corrupt memory which means
system corruption. With zram, it can happen with
1. 64K architecture
2. partial IO
3. slub debug
Partial IO need to allocate a page and zram allocates it via kmalloc.
With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned
address. And finally, copy_page(mem, cmem) corrupts memory.
So, this patch changes it to memcpy.
Actuaully, we don't need to change zram_bvec_write part because zsmalloc
returns page-aligned address in case of PAGE_SIZE class but it's not
good to rely on the internal of zsmalloc.
Note:
When this patch is merged to stable, clear_page should be fixed, too.
Unfortunately, recent zram removes it by "same page merge" feature so
it's hard to backport this patch to -stable tree.
I will handle it when I receive the mail from stable tree maintainer to
merge this patch to backport.
Fixes: 42e99bd ("zram: optimize memory operations with clear_page()/copy_page()")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Minchan Kim <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/zram/zram_drv.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -431,13 +431,13 @@ static int zram_decompress_page(struct z
if (!handle || zram_test_flag(meta, index, ZRAM_ZERO)) {
bit_spin_unlock(ZRAM_ACCESS, &meta->table[index].value);
- clear_page(mem);
+ memset(mem, 0, PAGE_SIZE);
return 0;
}
cmem = zs_map_object(meta->mem_pool, handle, ZS_MM_RO);
if (size == PAGE_SIZE)
- copy_page(mem, cmem);
+ memcpy(mem, cmem, PAGE_SIZE);
else
ret = zcomp_decompress(zram->comp, cmem, size, mem);
zs_unmap_object(meta->mem_pool, handle);
@@ -612,7 +612,7 @@ static int zram_bvec_write(struct zram *
if ((clen == PAGE_SIZE) && !is_partial_io(bvec)) {
src = kmap_atomic(page);
- copy_page(cmem, src);
+ memcpy(cmem, src, PAGE_SIZE);
kunmap_atomic(src);
} else {
memcpy(cmem, src, clen);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
commit 43fab9793c1f44e665b4f98035a14942edf03ddc upstream.
As reported by Marc Duponcheel <[email protected]>, firmware load on
dvb-usb is using the stack, with is not allowed anymore on default
Kernel configurations:
[ 1025.958836] dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in cold state, will try to load a firmware
[ 1025.958853] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw'
[ 1025.958855] dvb-usb: could not stop the USB controller CPU.
[ 1025.958856] dvb-usb: error while transferring firmware (transferred size: -11, block size: 3)
[ 1025.958856] dvb-usb: firmware download failed at 8 with -22
[ 1025.958867] usbcore: registered new interface driver dvb_usb_dtt200u
[ 2.789902] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw'
[ 2.789905] ------------[ cut here ]------------
[ 2.789911] WARNING: CPU: 3 PID: 2196 at drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore]
[ 2.789912] transfer buffer not dma capable
[ 2.789912] Modules linked in: btusb dvb_usb_dtt200u(+) dvb_usb_af9035(+) btrtl btbcm dvb_usb dvb_usb_v2 btintel dvb_core bluetooth rc_core rfkill x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd drm_kms_helper syscopyarea sysfillrect pcspkr i2c_i801 sysimgblt fb_sys_fops drm i2c_smbus i2c_core r8169 lpc_ich mfd_core mii thermal fan rtc_cmos video button acpi_cpufreq processor snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd crc32c_intel ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd usbcore usb_common dm_mirror dm_region_hash dm_log dm_mod
[ 2.789936] CPU: 3 PID: 2196 Comm: systemd-udevd Not tainted 4.9.0-gentoo #1
[ 2.789937] Hardware name: ASUS All Series/H81I-PLUS, BIOS 0401 07/23/2013
[ 2.789938] ffffc9000339b690 ffffffff812bd397 ffffc9000339b6e0 0000000000000000
[ 2.789939] ffffc9000339b6d0 ffffffff81055c86 000006300339b6a0 ffff880116c0c000
[ 2.789941] 0000000000000000 0000000000000000 0000000000000001 ffff880116c08000
[ 2.789942] Call Trace:
[ 2.789945] [<ffffffff812bd397>] dump_stack+0x4d/0x66
[ 2.789947] [<ffffffff81055c86>] __warn+0xc6/0xe0
[ 2.789948] [<ffffffff81055cea>] warn_slowpath_fmt+0x4a/0x50
[ 2.789952] [<ffffffffa006d460>] usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore]
[ 2.789954] [<ffffffff814ed5a8>] ? io_schedule_timeout+0xd8/0x110
[ 2.789956] [<ffffffffa006e09c>] usb_hcd_submit_urb+0x9c/0x980 [usbcore]
[ 2.789958] [<ffffffff812d0ebf>] ? copy_page_to_iter+0x14f/0x2b0
[ 2.789960] [<ffffffff81126818>] ? pagecache_get_page+0x28/0x240
[ 2.789962] [<ffffffff8118c2a0>] ? touch_atime+0x20/0xa0
[ 2.789964] [<ffffffffa006f7c4>] usb_submit_urb+0x2c4/0x520 [usbcore]
[ 2.789967] [<ffffffffa006feca>] usb_start_wait_urb+0x5a/0xe0 [usbcore]
[ 2.789969] [<ffffffffa007000c>] usb_control_msg+0xbc/0xf0 [usbcore]
[ 2.789970] [<ffffffffa067903d>] usb_cypress_writemem+0x3d/0x40 [dvb_usb]
[ 2.789972] [<ffffffffa06791cf>] usb_cypress_load_firmware+0x4f/0x130 [dvb_usb]
[ 2.789973] [<ffffffff8109dbbe>] ? console_unlock+0x2fe/0x5d0
[ 2.789974] [<ffffffff8109e10c>] ? vprintk_emit+0x27c/0x410
[ 2.789975] [<ffffffff8109e40a>] ? vprintk_default+0x1a/0x20
[ 2.789976] [<ffffffff81124d76>] ? printk+0x43/0x4b
[ 2.789977] [<ffffffffa0679310>] dvb_usb_download_firmware+0x60/0xd0 [dvb_usb]
[ 2.789979] [<ffffffffa0679898>] dvb_usb_device_init+0x3d8/0x610 [dvb_usb]
[ 2.789981] [<ffffffffa069e302>] dtt200u_usb_probe+0x92/0xd0 [dvb_usb_dtt200u]
[ 2.789984] [<ffffffffa007420c>] usb_probe_interface+0xfc/0x270 [usbcore]
[ 2.789985] [<ffffffff8138bf95>] driver_probe_device+0x215/0x2d0
[ 2.789986] [<ffffffff8138c0e6>] __driver_attach+0x96/0xa0
[ 2.789987] [<ffffffff8138c050>] ? driver_probe_device+0x2d0/0x2d0
[ 2.789988] [<ffffffff81389ffb>] bus_for_each_dev+0x5b/0x90
[ 2.789989] [<ffffffff8138b7b9>] driver_attach+0x19/0x20
[ 2.789990] [<ffffffff8138b33c>] bus_add_driver+0x11c/0x220
[ 2.789991] [<ffffffff8138c91b>] driver_register+0x5b/0xd0
[ 2.789994] [<ffffffffa0072f6c>] usb_register_driver+0x7c/0x130 [usbcore]
[ 2.789994] [<ffffffffa06a5000>] ? 0xffffffffa06a5000
[ 2.789996] [<ffffffffa06a501e>] dtt200u_usb_driver_init+0x1e/0x20 [dvb_usb_dtt200u]
[ 2.789997] [<ffffffff81000408>] do_one_initcall+0x38/0x140
[ 2.789998] [<ffffffff8116001c>] ? __vunmap+0x7c/0xc0
[ 2.789999] [<ffffffff81124fb0>] ? do_init_module+0x22/0x1d2
[ 2.790000] [<ffffffff81124fe8>] do_init_module+0x5a/0x1d2
[ 2.790002] [<ffffffff810c96b1>] load_module+0x1e11/0x2580
[ 2.790003] [<ffffffff810c68b0>] ? show_taint+0x30/0x30
[ 2.790004] [<ffffffff81177250>] ? kernel_read_file+0x100/0x190
[ 2.790005] [<ffffffff810c9ffa>] SyS_finit_module+0xba/0xc0
[ 2.790007] [<ffffffff814f13e0>] entry_SYSCALL_64_fastpath+0x13/0x94
[ 2.790008] ---[ end trace c78a74e78baec6fc ]---
So, allocate the structure dynamically.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb/dvb-usb-firmware.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
--- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
@@ -35,29 +35,34 @@ static int usb_cypress_writemem(struct u
int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type)
{
- struct hexline hx;
+ struct hexline *hx;
u8 reset;
int ret,pos=0;
+ hx = kmalloc(sizeof(*hx), GFP_KERNEL);
+ if (!hx)
+ return -ENOMEM;
+
/* stop the CPU */
reset = 1;
if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1)
err("could not stop the USB controller CPU.");
- while ((ret = dvb_usb_get_hexline(fw,&hx,&pos)) > 0) {
- deb_fw("writing to address 0x%04x (buffer: 0x%02x %02x)\n",hx.addr,hx.len,hx.chk);
- ret = usb_cypress_writemem(udev,hx.addr,hx.data,hx.len);
+ while ((ret = dvb_usb_get_hexline(fw, hx, &pos)) > 0) {
+ deb_fw("writing to address 0x%04x (buffer: 0x%02x %02x)\n", hx->addr, hx->len, hx->chk);
+ ret = usb_cypress_writemem(udev, hx->addr, hx->data, hx->len);
- if (ret != hx.len) {
+ if (ret != hx->len) {
err("error while transferring firmware "
"(transferred size: %d, block size: %d)",
- ret,hx.len);
+ ret, hx->len);
ret = -EINVAL;
break;
}
}
if (ret < 0) {
err("firmware download failed at %d with %d",pos,ret);
+ kfree(hx);
return ret;
}
@@ -71,6 +76,8 @@ int usb_cypress_load_firmware(struct usb
} else
ret = -EIO;
+ kfree(hx);
+
return ret;
}
EXPORT_SYMBOL(usb_cypress_load_firmware);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thierry Reding <[email protected]>
commit 5fa4086987506b2ab8c92f8f99f2295db9918856 upstream.
Accessing the registers of the RTC block on Tegra requires the module
clock to be enabled. This only works because the RTC module clock will
be enabled by default during early boot. However, because the clock is
unused, the CCF will disable it at late_init time. This causes the RTC
to become unusable afterwards. This can easily be reproduced by trying
to use the RTC:
$ hwclock --rtc /dev/rtc1
This will hang the system. I ran into this by following up on a report
by Martin Michlmayr that reboot wasn't working on Tegra210 systems. It
turns out that the rtc-tegra driver's ->shutdown() implementation will
hang the CPU, because of the disabled clock, before the system can be
rebooted.
What confused me for a while is that the same driver is used on prior
Tegra generations where the hang can not be observed. However, as Peter
De Schrijver pointed out, this is because on 32-bit Tegra chips the RTC
clock is enabled by the tegra20_timer.c clocksource driver, which uses
the RTC to provide a persistent clock. This code is never enabled on
64-bit Tegra because the persistent clock infrastructure does not exist
on 64-bit ARM.
The proper fix for this is to add proper clock handling to the RTC
driver in order to ensure that the clock is enabled when the driver
requires it. All device trees contain the clock already, therefore
no additional changes are required.
Reported-by: Martin Michlmayr <[email protected]>
Acked-By Peter De Schrijver <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-tegra.c | 28 ++++++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
--- a/drivers/rtc/rtc-tegra.c
+++ b/drivers/rtc/rtc-tegra.c
@@ -18,6 +18,7 @@
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/kernel.h>
+#include <linux/clk.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -59,6 +60,7 @@ struct tegra_rtc_info {
struct platform_device *pdev;
struct rtc_device *rtc_dev;
void __iomem *rtc_base; /* NULL if not initialized. */
+ struct clk *clk;
int tegra_rtc_irq; /* alarm and periodic irq */
spinlock_t tegra_rtc_lock;
};
@@ -330,6 +332,14 @@ static int __init tegra_rtc_probe(struct
if (info->tegra_rtc_irq <= 0)
return -EBUSY;
+ info->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(info->clk))
+ return PTR_ERR(info->clk);
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret < 0)
+ return ret;
+
/* set context info. */
info->pdev = pdev;
spin_lock_init(&info->tegra_rtc_lock);
@@ -350,7 +360,7 @@ static int __init tegra_rtc_probe(struct
ret = PTR_ERR(info->rtc_dev);
dev_err(&pdev->dev, "Unable to register device (err=%d).\n",
ret);
- return ret;
+ goto disable_clk;
}
ret = devm_request_irq(&pdev->dev, info->tegra_rtc_irq,
@@ -360,12 +370,25 @@ static int __init tegra_rtc_probe(struct
dev_err(&pdev->dev,
"Unable to request interrupt for device (err=%d).\n",
ret);
- return ret;
+ goto disable_clk;
}
dev_notice(&pdev->dev, "Tegra internal Real Time Clock\n");
return 0;
+
+disable_clk:
+ clk_disable_unprepare(info->clk);
+ return ret;
+}
+
+static int tegra_rtc_remove(struct platform_device *pdev)
+{
+ struct tegra_rtc_info *info = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(info->clk);
+
+ return 0;
}
#ifdef CONFIG_PM_SLEEP
@@ -417,6 +440,7 @@ static void tegra_rtc_shutdown(struct pl
MODULE_ALIAS("platform:tegra_rtc");
static struct platform_driver tegra_rtc_driver = {
+ .remove = tegra_rtc_remove,
.shutdown = tegra_rtc_shutdown,
.driver = {
.name = "tegra_rtc",
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit d41149145f98fe26dcd0bfd1d6cc095e6e041418 upstream.
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/catc.c | 33 +++++++++++++++++----------------
1 file changed, 17 insertions(+), 16 deletions(-)
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -777,7 +777,7 @@ static int catc_probe(struct usb_interfa
struct net_device *netdev;
struct catc *catc;
u8 broadcast[ETH_ALEN];
- int i, pktsz;
+ int i, pktsz, ret;
if (usb_set_interface(usbdev,
intf->altsetting->desc.bInterfaceNumber, 1)) {
@@ -812,12 +812,8 @@ static int catc_probe(struct usb_interfa
if ((!catc->ctrl_urb) || (!catc->tx_urb) ||
(!catc->rx_urb) || (!catc->irq_urb)) {
dev_err(&intf->dev, "No free urbs available.\n");
- usb_free_urb(catc->ctrl_urb);
- usb_free_urb(catc->tx_urb);
- usb_free_urb(catc->rx_urb);
- usb_free_urb(catc->irq_urb);
- free_netdev(netdev);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail_free;
}
/* The F5U011 has the same vendor/product as the netmate but a device version of 0x130 */
@@ -914,16 +910,21 @@ static int catc_probe(struct usb_interfa
usb_set_intfdata(intf, catc);
SET_NETDEV_DEV(netdev, &intf->dev);
- if (register_netdev(netdev) != 0) {
- usb_set_intfdata(intf, NULL);
- usb_free_urb(catc->ctrl_urb);
- usb_free_urb(catc->tx_urb);
- usb_free_urb(catc->rx_urb);
- usb_free_urb(catc->irq_urb);
- free_netdev(netdev);
- return -EIO;
- }
+ ret = register_netdev(netdev);
+ if (ret)
+ goto fail_clear_intfdata;
+
return 0;
+
+fail_clear_intfdata:
+ usb_set_intfdata(intf, NULL);
+fail_free:
+ usb_free_urb(catc->ctrl_urb);
+ usb_free_urb(catc->tx_urb);
+ usb_free_urb(catc->rx_urb);
+ usb_free_urb(catc->irq_urb);
+ free_netdev(netdev);
+ return ret;
}
static void catc_disconnect(struct usb_interface *intf)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit 2d6a0e9de03ee658a9adc3bfb2f0ca55dff1e478 upstream.
Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Brad Spengler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/catc.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -777,7 +777,7 @@ static int catc_probe(struct usb_interfa
struct net_device *netdev;
struct catc *catc;
u8 broadcast[ETH_ALEN];
- int i, pktsz, ret;
+ int pktsz, ret;
if (usb_set_interface(usbdev,
intf->altsetting->desc.bInterfaceNumber, 1)) {
@@ -841,15 +841,24 @@ static int catc_probe(struct usb_interfa
catc->irq_buf, 2, catc_irq_done, catc, 1);
if (!catc->is_f5u011) {
+ u32 *buf;
+ int i;
+
dev_dbg(dev, "Checking memory size\n");
- i = 0x12345678;
- catc_write_mem(catc, 0x7a80, &i, 4);
- i = 0x87654321;
- catc_write_mem(catc, 0xfa80, &i, 4);
- catc_read_mem(catc, 0x7a80, &i, 4);
+ buf = kmalloc(4, GFP_KERNEL);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto fail_free;
+ }
+
+ *buf = 0x12345678;
+ catc_write_mem(catc, 0x7a80, buf, 4);
+ *buf = 0x87654321;
+ catc_write_mem(catc, 0xfa80, buf, 4);
+ catc_read_mem(catc, 0x7a80, buf, 4);
- switch (i) {
+ switch (*buf) {
case 0x12345678:
catc_set_reg(catc, TxBufCount, 8);
catc_set_reg(catc, RxBufCount, 32);
@@ -864,6 +873,8 @@ static int catc_probe(struct usb_interfa
dev_dbg(dev, "32k Memory\n");
break;
}
+
+ kfree(buf);
dev_dbg(dev, "Getting MAC from SEEROM.\n");
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <[email protected]>
commit 72f310481a08db821b614e7b5d00febcc9064b36 upstream.
We don't hold the mmap_sem while searching for VMAs (via find_vma), in
kvm_arch_prepare_memory_region, which can end up in expected failures.
Fixes: commit 8eef91239e57 ("arm/arm64: KVM: map MMIO regions at creation time")
Cc: Ard Biesheuvel <[email protected]>
Cc: Eric Auger <[email protected]>
Reviewed-by: Christoffer Dall <[email protected]>
[ Handle dirty page logging failure case ]
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kvm/mmu.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -1407,6 +1407,7 @@ int kvm_arch_prepare_memory_region(struc
(KVM_PHYS_SIZE >> PAGE_SHIFT))
return -EFAULT;
+ down_read(¤t->mm->mmap_sem);
/*
* A memory region could potentially cover multiple VMAs, and any holes
* between them, so iterate over all of them to find out if we can map
@@ -1464,6 +1465,8 @@ int kvm_arch_prepare_memory_region(struc
else
stage2_flush_memslot(kvm, memslot);
spin_unlock(&kvm->mmu_lock);
+
+ up_read(¤t->mm->mmap_sem);
return ret;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcelo Ricardo Leitner <[email protected]>
commit dfcb9f4f99f1e9a49e43398a7bfbf56927544af1 upstream.
commit 2dcab5984841 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf")
attempted to avoid a BUG_ON call when the association being used for a
sendmsg() is blocked waiting for more sndbuf and another thread did a
peeloff operation on such asoc, moving it to another socket.
As Ben Hutchings noticed, then in such case it would return without
locking back the socket and would cause two unlocks in a row.
Further analysis also revealed that it could allow a double free if the
application managed to peeloff the asoc that is created during the
sendmsg call, because then sctp_sendmsg() would try to free the asoc
that was created only for that call.
This patch takes another approach. It will deny the peeloff operation
if there is a thread sleeping on the asoc, so this situation doesn't
exist anymore. This avoids the issues described above and also honors
the syscalls that are already being handled (it can be multiple sendmsg
calls).
Joint work with Xin Long.
Fixes: 2dcab5984841 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf")
Cc: Alexander Popov <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/socket.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -4433,6 +4433,12 @@ int sctp_do_peeloff(struct sock *sk, sct
if (!asoc)
return -EINVAL;
+ /* If there is a thread waiting on more sndbuf space for
+ * sending on this asoc, it cannot be peeled.
+ */
+ if (waitqueue_active(&asoc->wait))
+ return -EBUSY;
+
/* An association cannot be branched off from an already peeled-off
* socket, nor is this supported for tcp style sockets.
*/
@@ -6965,8 +6971,6 @@ static int sctp_wait_for_sndbuf(struct s
*/
release_sock(sk);
current_timeo = schedule_timeout(current_timeo);
- if (sk != asoc->base.sk)
- goto do_error;
lock_sock(sk);
*timeo_p = current_timeo;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Lohrmann <[email protected]>
commit 13603685c1f12c67a7a2427f00b63f39a2b6f7c9 upstream.
As reported by Max, the Windows 2008 R2 chkdsk utility expects
VERIFY_16 to be supported, and does not handle the returned
CHECK_CONDITION properly, resulting in an infinite loop.
The kernel will log huge amounts of this error:
kernel: TARGET_CORE[iSCSI]: Unsupported SCSI Opcode 0x8f, sending
CHECK_CONDITION.
Signed-off-by: Max Lohrmann <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_sbc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -946,9 +946,15 @@ sbc_parse_cdb(struct se_cmd *cmd, struct
return ret;
break;
case VERIFY:
+ case VERIFY_16:
size = 0;
- sectors = transport_get_sectors_10(cdb);
- cmd->t_task_lba = transport_lba_32(cdb);
+ if (cdb[0] == VERIFY) {
+ sectors = transport_get_sectors_10(cdb);
+ cmd->t_task_lba = transport_lba_32(cdb);
+ } else {
+ sectors = transport_get_sectors_16(cdb);
+ cmd->t_task_lba = transport_lba_64(cdb);
+ }
cmd->execute_cmd = sbc_emulate_noop;
goto check_lba;
case REZERO_UNIT:
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Mackerras <[email protected]>
commit 48fe9e9488743eec9b7c1addd3c93f12f2123d54 upstream.
In the past, there was only one load-with-reservation instruction,
lwarx, and if a program attempted a lwarx on a misaligned address, it
would take an alignment interrupt and the kernel handler would emulate
it as though it was lwzx, which was not really correct, but benign since
it is loading the right amount of data, and the lwarx should be paired
with a stwcx. to the same address, which would also cause an alignment
interrupt which would result in a SIGBUS being delivered to the process.
We now have 5 different sizes of load-with-reservation instruction. Of
those, lharx and ldarx cause an immediate SIGBUS by luck since their
entries in aligninfo[] overlap instructions which were not fixed up, but
lqarx overlaps with lhz and will be emulated as such. lbarx can never
generate an alignment interrupt since it only operates on 1 byte.
To straighten this out and fix the lqarx case, this adds code to detect
the l[hwdq]arx instructions and return without fixing them up, resulting
in a SIGBUS being delivered to the process.
Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/align.c | 27 +++++++++++++++++++--------
1 file changed, 19 insertions(+), 8 deletions(-)
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -808,14 +808,25 @@ int fix_alignment(struct pt_regs *regs)
nb = aligninfo[instr].len;
flags = aligninfo[instr].flags;
- /* ldbrx/stdbrx overlap lfs/stfs in the DSISR unfortunately */
- if (IS_XFORM(instruction) && ((instruction >> 1) & 0x3ff) == 532) {
- nb = 8;
- flags = LD+SW;
- } else if (IS_XFORM(instruction) &&
- ((instruction >> 1) & 0x3ff) == 660) {
- nb = 8;
- flags = ST+SW;
+ /*
+ * Handle some cases which give overlaps in the DSISR values.
+ */
+ if (IS_XFORM(instruction)) {
+ switch (get_xop(instruction)) {
+ case 532: /* ldbrx */
+ nb = 8;
+ flags = LD+SW;
+ break;
+ case 660: /* stdbrx */
+ nb = 8;
+ flags = ST+SW;
+ break;
+ case 20: /* lwarx */
+ case 84: /* ldarx */
+ case 116: /* lharx */
+ case 276: /* lqarx */
+ return 0; /* not emulated ever */
+ }
}
/* Byteswap little endian loads and stores */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit c520ff3d03f0b5db7146d9beed6373ad5d2a5e0e upstream.
When snd_seq_pool_done() is called, it marks the closing flag to
refuse the further cell insertions. But snd_seq_pool_done() itself
doesn't clear the cells but just waits until all cells are cleared by
the caller side. That is, it's racy, and this leads to the endless
stall as syzkaller spotted.
This patch addresses the racy by splitting the setup of pool->closing
flag out of snd_seq_pool_done(), and calling it properly before
snd_seq_pool_done().
BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.com
Reported-and-tested-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/seq/seq_clientmgr.c | 1 +
sound/core/seq/seq_fifo.c | 3 +++
sound/core/seq/seq_memory.c | 17 +++++++++++++----
sound/core/seq/seq_memory.h | 1 +
4 files changed, 18 insertions(+), 4 deletions(-)
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -1921,6 +1921,7 @@ static int snd_seq_ioctl_set_client_pool
info.output_pool != client->pool->size)) {
if (snd_seq_write_pool_allocated(client)) {
/* remove all existing cells */
+ snd_seq_pool_mark_closing(client->pool);
snd_seq_queue_client_leave_cells(client->number);
snd_seq_pool_done(client->pool);
}
--- a/sound/core/seq/seq_fifo.c
+++ b/sound/core/seq/seq_fifo.c
@@ -70,6 +70,9 @@ void snd_seq_fifo_delete(struct snd_seq_
return;
*fifo = NULL;
+ if (f->pool)
+ snd_seq_pool_mark_closing(f->pool);
+
snd_seq_fifo_clear(f);
/* wake up clients if any */
--- a/sound/core/seq/seq_memory.c
+++ b/sound/core/seq/seq_memory.c
@@ -414,6 +414,18 @@ int snd_seq_pool_init(struct snd_seq_poo
return 0;
}
+/* refuse the further insertion to the pool */
+void snd_seq_pool_mark_closing(struct snd_seq_pool *pool)
+{
+ unsigned long flags;
+
+ if (snd_BUG_ON(!pool))
+ return;
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->closing = 1;
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
/* remove events */
int snd_seq_pool_done(struct snd_seq_pool *pool)
{
@@ -425,10 +437,6 @@ int snd_seq_pool_done(struct snd_seq_poo
return -EINVAL;
/* wait for closing all threads */
- spin_lock_irqsave(&pool->lock, flags);
- pool->closing = 1;
- spin_unlock_irqrestore(&pool->lock, flags);
-
if (waitqueue_active(&pool->output_sleep))
wake_up(&pool->output_sleep);
@@ -491,6 +499,7 @@ int snd_seq_pool_delete(struct snd_seq_p
*ppool = NULL;
if (pool == NULL)
return 0;
+ snd_seq_pool_mark_closing(pool);
snd_seq_pool_done(pool);
kfree(pool);
return 0;
--- a/sound/core/seq/seq_memory.h
+++ b/sound/core/seq/seq_memory.h
@@ -84,6 +84,7 @@ static inline int snd_seq_total_cells(st
int snd_seq_pool_init(struct snd_seq_pool *pool);
/* done pool - free events */
+void snd_seq_pool_mark_closing(struct snd_seq_pool *pool);
int snd_seq_pool_done(struct snd_seq_pool *pool);
/* create pool */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 92461f5d723037530c1f36cce93640770037812c upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory that lie beyond the end of the endpoint
array should a malicious device lack the expected endpoints.
Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40... ")
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/touchscreen/sur40.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/input/touchscreen/sur40.c
+++ b/drivers/input/touchscreen/sur40.c
@@ -361,6 +361,9 @@ static int sur40_probe(struct usb_interf
if (iface_desc->desc.bInterfaceClass != 0xFF)
return -ENODEV;
+ if (iface_desc->desc.bNumEndpoints < 5)
+ return -ENODEV;
+
/* Use endpoint #4 (0x86). */
endpoint = &iface_desc->endpoint[4].desc;
if (endpoint->bEndpointAddress != TOUCH_ENDPOINT)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tahsin Erdogan <[email protected]>
commit 320661b08dd6f1746d5c7ab4eb435ec64b97cd45 upstream.
Update to pcpu_nr_empty_pop_pages in pcpu_alloc() is currently done
without holding pcpu_lock. This can lead to bad updates to the variable.
Add missing lock calls.
Fixes: b539b87fed37 ("percpu: implmeent pcpu_nr_empty_pop_pages and chunk->nr_populated")
Signed-off-by: Tahsin Erdogan <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/percpu.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1012,8 +1012,11 @@ area_found:
mutex_unlock(&pcpu_alloc_mutex);
}
- if (chunk != pcpu_reserved_chunk)
+ if (chunk != pcpu_reserved_chunk) {
+ spin_lock_irqsave(&pcpu_lock, flags);
pcpu_nr_empty_pop_pages -= occ_pages;
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+ }
if (pcpu_nr_empty_pop_pages < PCPU_EMPTY_POP_PAGES_LOW)
pcpu_schedule_balance_work();
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maor Gottlieb <[email protected]>
commit 5f40b4ed975c26016cf41953b7510fe90718e21c upstream.
With ConnectX-4 sharing SRQs from the same space as QPs, we hit a
limit preventing some applications to allocate needed QPs amount.
Double the size to 256K.
Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -86,7 +86,7 @@ static struct mlx5_profile profile[] = {
[2] = {
.mask = MLX5_PROF_MASK_QP_SIZE |
MLX5_PROF_MASK_MR_CACHE,
- .log_max_qp = 17,
+ .log_max_qp = 18,
.mr_cache[0] = {
.size = 500,
.limit = 250
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 181302dc7239add8ab1449c23ecab193f52ee6ab upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Fixes: 53f3a9e26ed5 ("mmc: USB SD Host Controller (USHC) driver")
Cc: David Vrabel <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/ushc.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -426,6 +426,9 @@ static int ushc_probe(struct usb_interfa
struct ushc_data *ushc;
int ret;
+ if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
if (mmc == NULL)
return -ENOMEM;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit b9cf625d6ecde0d372e23ae022feead72b4228a6 upstream.
If ext4_convert_inline_data() was called on a directory with inline
data, the filesystem was left in an inconsistent state (as considered by
e2fsck) because the file size was not increased to cover the new block.
This happened because the inode was not marked dirty after i_disksize
was updated. Fix this by marking the inode dirty at the end of
ext4_finish_convert_inline_dir().
This bug was probably not noticed before because most users mark the
inode dirty afterwards for other reasons. But if userspace executed
FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by
'kvm-xfstests -c adv generic/396', then the inode was never marked dirty
after updating i_disksize.
Fixes: 3c47d54170b6a678875566b1b8d6dcf57904e49b
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inline.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -1148,10 +1148,9 @@ static int ext4_finish_convert_inline_di
set_buffer_uptodate(dir_block);
err = ext4_handle_dirty_dirent_node(handle, inode, dir_block);
if (err)
- goto out;
+ return err;
set_buffer_verified(dir_block);
-out:
- return err;
+ return ext4_mark_inode_dirty(handle, inode);
}
static int ext4_convert_inline_data_nolock(handle_t *handle,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Darrick J. Wong <[email protected]>
commit ef388e2054feedaeb05399ed654bdb06f385d294 upstream.
The on-disk field di_size is used to set i_size, which is a signed
integer of loff_t. If the high bit of di_size is set, we'll end up with
a negative i_size, which will cause all sorts of problems. Since the
VFS won't let us create a file with such length, we should catch them
here in the verifier too.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/libxfs/xfs_inode_buf.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/fs/xfs/libxfs/xfs_inode_buf.c
+++ b/fs/xfs/libxfs/xfs_inode_buf.c
@@ -304,6 +304,14 @@ xfs_dinode_verify(
if (dip->di_magic != cpu_to_be16(XFS_DINODE_MAGIC))
return false;
+ /* don't allow invalid i_size */
+ if (be64_to_cpu(dip->di_size) & (1ULL << 63))
+ return false;
+
+ /* No zero-length symlinks. */
+ if (S_ISLNK(be16_to_cpu(dip->di_mode)) && dip->di_size == 0)
+ return false;
+
/* only version 3 or greater inodes are extensively verified here */
if (dip->di_version < 3)
return true;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Todd Fujinaka <[email protected]>
commit 5bc8c230e2a993b49244f9457499f17283da9ec7 upstream.
i210 and i211 share the same PHY but have different PCI IDs. Don't
forget i211 for any i210 workarounds.
Signed-off-by: Todd Fujinaka <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/igb/e1000_phy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -84,7 +84,7 @@ s32 igb_get_phy_id(struct e1000_hw *hw)
u16 phy_id;
/* ensure PHY page selection to fix misconfigured i210 */
- if (hw->mac.type == e1000_i210)
+ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0);
ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris J Arges <[email protected]>
commit 4e684f59d760a2c7c716bb60190783546e2d08a1 upstream.
Sometimes firmware may not properly initialize I347AT4_PAGE_SELECT causing
the probe of an igb i210 NIC to fail. This patch adds an addition zeroing
of this register during igb_get_phy_id to workaround this issue.
Thanks for Jochen Henneberg for the idea and original patch.
Signed-off-by: Chris J Arges <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/igb/e1000_phy.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -83,6 +83,10 @@ s32 igb_get_phy_id(struct e1000_hw *hw)
s32 ret_val = 0;
u16 phy_id;
+ /* ensure PHY page selection to fix misconfigured i210 */
+ if (hw->mac.type == e1000_i210)
+ phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0);
+
ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
if (ret_val)
goto out;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Salls <[email protected]>
commit cf01fb9985e8deb25ccf0ea54d916b8871ae0e62 upstream.
In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.
Signed-off-by: Chris Salls <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mempolicy.c | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1546,7 +1546,6 @@ COMPAT_SYSCALL_DEFINE5(get_mempolicy, in
COMPAT_SYSCALL_DEFINE3(set_mempolicy, int, mode, compat_ulong_t __user *, nmask,
compat_ulong_t, maxnode)
{
- long err = 0;
unsigned long __user *nm = NULL;
unsigned long nr_bits, alloc_size;
DECLARE_BITMAP(bm, MAX_NUMNODES);
@@ -1555,14 +1554,13 @@ COMPAT_SYSCALL_DEFINE3(set_mempolicy, in
alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
if (nmask) {
- err = compat_get_bitmap(bm, nmask, nr_bits);
+ if (compat_get_bitmap(bm, nmask, nr_bits))
+ return -EFAULT;
nm = compat_alloc_user_space(alloc_size);
- err |= copy_to_user(nm, bm, alloc_size);
+ if (copy_to_user(nm, bm, alloc_size))
+ return -EFAULT;
}
- if (err)
- return -EFAULT;
-
return sys_set_mempolicy(mode, nm, nr_bits+1);
}
@@ -1570,7 +1568,6 @@ COMPAT_SYSCALL_DEFINE6(mbind, compat_ulo
compat_ulong_t, mode, compat_ulong_t __user *, nmask,
compat_ulong_t, maxnode, compat_ulong_t, flags)
{
- long err = 0;
unsigned long __user *nm = NULL;
unsigned long nr_bits, alloc_size;
nodemask_t bm;
@@ -1579,14 +1576,13 @@ COMPAT_SYSCALL_DEFINE6(mbind, compat_ulo
alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
if (nmask) {
- err = compat_get_bitmap(nodes_addr(bm), nmask, nr_bits);
+ if (compat_get_bitmap(nodes_addr(bm), nmask, nr_bits))
+ return -EFAULT;
nm = compat_alloc_user_space(alloc_size);
- err |= copy_to_user(nm, nodes_addr(bm), alloc_size);
+ if (copy_to_user(nm, nodes_addr(bm), alloc_size))
+ return -EFAULT;
}
- if (err)
- return -EFAULT;
-
return sys_mbind(start, len, mode, nm, nr_bits+1, flags);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joerg Roedel <[email protected]>
commit 08f63d97749185fab942a3a47ed80f5bd89b8b7d upstream.
No platform-device is required for IO(x)APICs, so don't even
create them.
[ rjw: This fixes a problem with leaking platform device objects
after IOAPIC/IOxAPIC hot-removal events.]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpi_platform.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/acpi/acpi_platform.c
+++ b/drivers/acpi/acpi_platform.c
@@ -24,9 +24,11 @@
ACPI_MODULE_NAME("platform");
static const struct acpi_device_id forbidden_id_list[] = {
- {"PNP0000", 0}, /* PIC */
- {"PNP0100", 0}, /* Timer */
- {"PNP0200", 0}, /* AT DMA Controller */
+ {"PNP0000", 0}, /* PIC */
+ {"PNP0100", 0}, /* Timer */
+ {"PNP0200", 0}, /* AT DMA Controller */
+ {"ACPI0009", 0}, /* IOxAPIC */
+ {"ACPI000A", 0}, /* IOAPIC */
{"", 0},
};
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gabriel Krisman Bertazi <[email protected]>
commit f209fa03fc9d131b3108c2e4936181eabab87416 upstream.
During a PCI error recovery, like the ones provoked by EEH in the ppc64
platform, all IO to the device must be blocked while the recovery is
completed. Current 8250_pci implementation only suspends the port
instead of detaching it, which doesn't prevent incoming accesses like
TIOCMGET and TIOCMSET calls from reaching the device. Those end up
racing with the EEH recovery, crashing it. Similar races were also
observed when opening the device and when shutting it down during
recovery.
This patch implements a more robust IO blockage for the 8250_pci
recovery by unregistering the port at the beginning of the procedure and
re-adding it afterwards. Since the port is detached from the uart
layer, we can be sure that no request will make through to the device
during recovery. This is similar to the solution used by the JSM serial
driver.
I thank Peter Hurley <[email protected]> for valuable input on
this one over one year ago.
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_pci.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -56,6 +56,7 @@ struct serial_private {
unsigned int nr;
void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
struct pci_serial_quirk *quirk;
+ const struct pciserial_board *board;
int line[0];
};
@@ -3868,6 +3869,7 @@ pciserial_init_ports(struct pci_dev *dev
}
}
priv->nr = i;
+ priv->board = board;
return priv;
err_deinit:
@@ -3878,7 +3880,7 @@ err_out:
}
EXPORT_SYMBOL_GPL(pciserial_init_ports);
-void pciserial_remove_ports(struct serial_private *priv)
+void pciserial_detach_ports(struct serial_private *priv)
{
struct pci_serial_quirk *quirk;
int i;
@@ -3898,7 +3900,11 @@ void pciserial_remove_ports(struct seria
quirk = find_quirk(priv->dev);
if (quirk->exit)
quirk->exit(priv->dev);
+}
+void pciserial_remove_ports(struct serial_private *priv)
+{
+ pciserial_detach_ports(priv);
kfree(priv);
}
EXPORT_SYMBOL_GPL(pciserial_remove_ports);
@@ -5505,7 +5511,7 @@ static pci_ers_result_t serial8250_io_er
return PCI_ERS_RESULT_DISCONNECT;
if (priv)
- pciserial_suspend_ports(priv);
+ pciserial_detach_ports(priv);
pci_disable_device(dev);
@@ -5530,9 +5536,18 @@ static pci_ers_result_t serial8250_io_sl
static void serial8250_io_resume(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
+ const struct pciserial_board *board;
- if (priv)
- pciserial_resume_ports(priv);
+ if (!priv)
+ return;
+
+ board = priv->board;
+ kfree(priv);
+ priv = pciserial_init_ports(dev, board);
+
+ if (!IS_ERR(priv)) {
+ pci_set_drvdata(dev, priv);
+ }
}
static const struct pci_error_handlers serial8250_err_handler = {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit ba340d7b83703768ce566f53f857543359aa1b98 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Fixes: bba5394ad3bd ("Input: add support for Hanwang tablets")
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/tablet/hanwang.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/input/tablet/hanwang.c
+++ b/drivers/input/tablet/hanwang.c
@@ -340,6 +340,9 @@ static int hanwang_probe(struct usb_inte
int error;
int i;
+ if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
hanwang = kzalloc(sizeof(struct hanwang), GFP_KERNEL);
input_dev = input_allocate_device();
if (!hanwang || !input_dev) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit ac2ee9ba953afe88f7a673e1c0c839227b1d7891 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Fixes: c04148f915e5 ("Input: add driver for USB VoIP phones with CM109...")
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/misc/cm109.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -675,6 +675,10 @@ static int cm109_usb_probe(struct usb_in
int error = -ENOMEM;
interface = intf->cur_altsetting;
+
+ if (interface->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
endpoint = &interface->endpoint[0].desc;
if (!usb_endpoint_is_int_in(endpoint))
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 68c32f9c2a36d410aa242e661506e5b2c2764179 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Fixes: cf7776dc05b8 ("[PATCH] isdn4linux: Siemens Gigaset drivers -
direct USB connection")
Cc: Hansjoerg Lipp <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/isdn/gigaset/bas-gigaset.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -2317,6 +2317,9 @@ static int gigaset_probe(struct usb_inte
return -ENODEV;
}
+ if (hostif->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
dev_info(&udev->dev,
"%s: Device matched (Vendor: 0x%x, Product: 0x%x)\n",
__func__, le16_to_cpu(udev->descriptor.idVendor),
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 2257211942bbbf6c798ab70b487d7e62f7835a1a upstream.
Fix the error checking of the alignment adjustment code in
raw_copy_from_user(), which mistakenly considers it safe to skip the
error check when aligning the source buffer on a 2 or 4 byte boundary.
If the destination buffer was unaligned it may have started to copy
using byte or word accesses, which could well be at the start of a new
(valid) source page. This would result in it appearing to have copied 1
or 2 bytes at the end of the first (invalid) page rather than none at
all.
Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/lib/usercopy.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -717,6 +717,8 @@ unsigned long __copy_user_zeroing(void *
if ((unsigned long) src & 1) {
__asm_copy_from_user_1(dst, src, retn);
n--;
+ if (retn)
+ goto copy_exception_bytes;
}
if ((unsigned long) dst & 1) {
/* Worst case - byte copy */
@@ -730,6 +732,8 @@ unsigned long __copy_user_zeroing(void *
if (((unsigned long) src & 2) && n >= 2) {
__asm_copy_from_user_2(dst, src, retn);
n -= 2;
+ if (retn)
+ goto copy_exception_bytes;
}
if ((unsigned long) dst & 2) {
/* Second worst case - word copy */
@@ -741,12 +745,6 @@ unsigned long __copy_user_zeroing(void *
}
}
- /* We only need one check after the unalignment-adjustments,
- because if both adjustments were done, either both or
- neither reference had an exception. */
- if (retn != 0)
- goto copy_exception_bytes;
-
#ifdef USE_RAPF
/* 64 bit copy loop */
if (!(((unsigned long) src | (unsigned long) dst) & 7)) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit b884a190afcecdbef34ca508ea5ee88bb7c77861 upstream.
The rapf copy loops in the Meta usercopy code is missing some extable
entries for HTP cores with unaligned access checking enabled, where
faults occur on the instruction immediately after the faulting access.
Add the fixup labels and extable entries for these cases so that corner
case user copy failures don't cause kernel crashes.
Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/lib/usercopy.c | 72 ++++++++++++++++++++++++++++++----------------
1 file changed, 48 insertions(+), 24 deletions(-)
--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -259,27 +259,31 @@
"MGETL D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
"22:\n" \
"MSETL [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
- "SUB %3, %3, #32\n" \
"23:\n" \
- "MGETL D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
+ "SUB %3, %3, #32\n" \
"24:\n" \
+ "MGETL D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
+ "25:\n" \
"MSETL [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "26:\n" \
"SUB %3, %3, #32\n" \
"DCACHE [%1+#-64], D0Ar6\n" \
"BR $Lloop"id"\n" \
\
"MOV RAPF, %1\n" \
- "25:\n" \
+ "27:\n" \
"MGETL D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
- "26:\n" \
+ "28:\n" \
"MSETL [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "29:\n" \
"SUB %3, %3, #32\n" \
- "27:\n" \
+ "30:\n" \
"MGETL D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
- "28:\n" \
+ "31:\n" \
"MSETL [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "32:\n" \
"SUB %0, %0, #8\n" \
- "29:\n" \
+ "33:\n" \
"SETL [%0++], D0.7, D1.7\n" \
"SUB %3, %3, #32\n" \
"1:" \
@@ -311,7 +315,11 @@
" .long 26b,3b\n" \
" .long 27b,3b\n" \
" .long 28b,3b\n" \
- " .long 29b,4b\n" \
+ " .long 29b,3b\n" \
+ " .long 30b,3b\n" \
+ " .long 31b,3b\n" \
+ " .long 32b,3b\n" \
+ " .long 33b,4b\n" \
" .previous\n" \
: "=r" (to), "=r" (from), "=r" (ret), "=d" (n) \
: "0" (to), "1" (from), "2" (ret), "3" (n) \
@@ -402,47 +410,55 @@
"MGETD D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
"22:\n" \
"MSETD [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
- "SUB %3, %3, #16\n" \
"23:\n" \
- "MGETD D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
- "24:\n" \
- "MSETD [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
"SUB %3, %3, #16\n" \
- "25:\n" \
+ "24:\n" \
"MGETD D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
- "26:\n" \
+ "25:\n" \
"MSETD [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "26:\n" \
"SUB %3, %3, #16\n" \
"27:\n" \
"MGETD D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
"28:\n" \
"MSETD [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "29:\n" \
+ "SUB %3, %3, #16\n" \
+ "30:\n" \
+ "MGETD D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
+ "31:\n" \
+ "MSETD [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "32:\n" \
"SUB %3, %3, #16\n" \
"DCACHE [%1+#-64], D0Ar6\n" \
"BR $Lloop"id"\n" \
\
"MOV RAPF, %1\n" \
- "29:\n" \
+ "33:\n" \
"MGETD D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
- "30:\n" \
+ "34:\n" \
"MSETD [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "35:\n" \
"SUB %3, %3, #16\n" \
- "31:\n" \
+ "36:\n" \
"MGETD D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
- "32:\n" \
+ "37:\n" \
"MSETD [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "38:\n" \
"SUB %3, %3, #16\n" \
- "33:\n" \
+ "39:\n" \
"MGETD D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
- "34:\n" \
+ "40:\n" \
"MSETD [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "41:\n" \
"SUB %3, %3, #16\n" \
- "35:\n" \
+ "42:\n" \
"MGETD D0FrT, D0.5, D0.6, D0.7, [%1++]\n" \
- "36:\n" \
+ "43:\n" \
"MSETD [%0++], D0FrT, D0.5, D0.6, D0.7\n" \
+ "44:\n" \
"SUB %0, %0, #4\n" \
- "37:\n" \
+ "45:\n" \
"SETD [%0++], D0.7\n" \
"SUB %3, %3, #16\n" \
"1:" \
@@ -482,7 +498,15 @@
" .long 34b,3b\n" \
" .long 35b,3b\n" \
" .long 36b,3b\n" \
- " .long 37b,4b\n" \
+ " .long 37b,3b\n" \
+ " .long 38b,3b\n" \
+ " .long 39b,3b\n" \
+ " .long 40b,3b\n" \
+ " .long 41b,3b\n" \
+ " .long 42b,3b\n" \
+ " .long 43b,3b\n" \
+ " .long 44b,3b\n" \
+ " .long 45b,4b\n" \
" .previous\n" \
: "=r" (to), "=r" (from), "=r" (ret), "=d" (n) \
: "0" (to), "1" (from), "2" (ret), "3" (n) \
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit ef62a2d81f73d9cddef14bc3d9097a57010d551c upstream.
Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger
copies between 5 and 16 bytes which are completely unused. Before fixing
zeroing lets drop these macros so there is less to fix.
Signed-off-by: James Hogan <[email protected]>
Cc: Al Viro <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/lib/usercopy.c | 113 ----------------------------------------------
1 file changed, 113 deletions(-)
--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -651,119 +651,6 @@ EXPORT_SYMBOL(__copy_user);
#define __asm_copy_from_user_4(to, from, ret) \
__asm_copy_from_user_4x_cont(to, from, ret, "", "", "")
-#define __asm_copy_from_user_5(to, from, ret) \
- __asm_copy_from_user_4x_cont(to, from, ret, \
- " GETB D1Ar1,[%1++]\n" \
- "4: SETB [%0++],D1Ar1\n", \
- "5: ADD %2,%2,#1\n" \
- " SETB [%0++],D1Ar1\n", \
- " .long 4b,5b\n")
-
-#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
- __asm_copy_from_user_4x_cont(to, from, ret, \
- " GETW D1Ar1,[%1++]\n" \
- "4: SETW [%0++],D1Ar1\n" COPY, \
- "5: ADD %2,%2,#2\n" \
- " SETW [%0++],D1Ar1\n" FIXUP, \
- " .long 4b,5b\n" TENTRY)
-
-#define __asm_copy_from_user_6(to, from, ret) \
- __asm_copy_from_user_6x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_7(to, from, ret) \
- __asm_copy_from_user_6x_cont(to, from, ret, \
- " GETB D1Ar1,[%1++]\n" \
- "6: SETB [%0++],D1Ar1\n", \
- "7: ADD %2,%2,#1\n" \
- " SETB [%0++],D1Ar1\n", \
- " .long 6b,7b\n")
-
-#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
- __asm_copy_from_user_4x_cont(to, from, ret, \
- " GETD D1Ar1,[%1++]\n" \
- "4: SETD [%0++],D1Ar1\n" COPY, \
- "5: ADD %2,%2,#4\n" \
- " SETD [%0++],D1Ar1\n" FIXUP, \
- " .long 4b,5b\n" TENTRY)
-
-#define __asm_copy_from_user_8(to, from, ret) \
- __asm_copy_from_user_8x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_9(to, from, ret) \
- __asm_copy_from_user_8x_cont(to, from, ret, \
- " GETB D1Ar1,[%1++]\n" \
- "6: SETB [%0++],D1Ar1\n", \
- "7: ADD %2,%2,#1\n" \
- " SETB [%0++],D1Ar1\n", \
- " .long 6b,7b\n")
-
-#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
- __asm_copy_from_user_8x_cont(to, from, ret, \
- " GETW D1Ar1,[%1++]\n" \
- "6: SETW [%0++],D1Ar1\n" COPY, \
- "7: ADD %2,%2,#2\n" \
- " SETW [%0++],D1Ar1\n" FIXUP, \
- " .long 6b,7b\n" TENTRY)
-
-#define __asm_copy_from_user_10(to, from, ret) \
- __asm_copy_from_user_10x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_11(to, from, ret) \
- __asm_copy_from_user_10x_cont(to, from, ret, \
- " GETB D1Ar1,[%1++]\n" \
- "8: SETB [%0++],D1Ar1\n", \
- "9: ADD %2,%2,#1\n" \
- " SETB [%0++],D1Ar1\n", \
- " .long 8b,9b\n")
-
-#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
- __asm_copy_from_user_8x_cont(to, from, ret, \
- " GETD D1Ar1,[%1++]\n" \
- "6: SETD [%0++],D1Ar1\n" COPY, \
- "7: ADD %2,%2,#4\n" \
- " SETD [%0++],D1Ar1\n" FIXUP, \
- " .long 6b,7b\n" TENTRY)
-
-#define __asm_copy_from_user_12(to, from, ret) \
- __asm_copy_from_user_12x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_13(to, from, ret) \
- __asm_copy_from_user_12x_cont(to, from, ret, \
- " GETB D1Ar1,[%1++]\n" \
- "8: SETB [%0++],D1Ar1\n", \
- "9: ADD %2,%2,#1\n" \
- " SETB [%0++],D1Ar1\n", \
- " .long 8b,9b\n")
-
-#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
- __asm_copy_from_user_12x_cont(to, from, ret, \
- " GETW D1Ar1,[%1++]\n" \
- "8: SETW [%0++],D1Ar1\n" COPY, \
- "9: ADD %2,%2,#2\n" \
- " SETW [%0++],D1Ar1\n" FIXUP, \
- " .long 8b,9b\n" TENTRY)
-
-#define __asm_copy_from_user_14(to, from, ret) \
- __asm_copy_from_user_14x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_15(to, from, ret) \
- __asm_copy_from_user_14x_cont(to, from, ret, \
- " GETB D1Ar1,[%1++]\n" \
- "10: SETB [%0++],D1Ar1\n", \
- "11: ADD %2,%2,#1\n" \
- " SETB [%0++],D1Ar1\n", \
- " .long 10b,11b\n")
-
-#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
- __asm_copy_from_user_12x_cont(to, from, ret, \
- " GETD D1Ar1,[%1++]\n" \
- "8: SETD [%0++],D1Ar1\n" COPY, \
- "9: ADD %2,%2,#4\n" \
- " SETD [%0++],D1Ar1\n" FIXUP, \
- " .long 8b,9b\n" TENTRY)
-
-#define __asm_copy_from_user_16(to, from, ret) \
- __asm_copy_from_user_16x_cont(to, from, ret, "", "", "")
#define __asm_copy_from_user_8x64(to, from, ret) \
asm volatile ( \
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 2c0b1df88b987a12d95ea1d6beaf01894f3cc725 upstream.
The fixup code to rewind the source pointer in
__asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by
a single unit (4 or 8 bytes), however this is insufficient if the fault
didn't occur on the first load in the loop, as the source pointer will
have been incremented but nothing will have been stored until all 4
register [pairs] are loaded.
Read the LSM_STEP field of TXSTATUS (which is already loaded into a
register), a bit like the copy_to_user versions, to determine how many
iterations of MGET[DL] have taken place, all of which need rewinding.
Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/lib/usercopy.c | 36 ++++++++++++++++++++++++++++--------
1 file changed, 28 insertions(+), 8 deletions(-)
--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -687,29 +687,49 @@ EXPORT_SYMBOL(__copy_user);
*
* Rationale:
* A fault occurs while reading from user buffer, which is the
- * source. Since the fault is at a single address, we only
- * need to rewind by 8 bytes.
+ * source.
* Since we don't write to kernel buffer until we read first,
* the kernel buffer is at the right state and needn't be
- * corrected.
+ * corrected, but the source must be rewound to the beginning of
+ * the block, which is LSM_STEP*8 bytes.
+ * LSM_STEP is bits 10:8 in TXSTATUS which is already read
+ * and stored in D0Ar2
+ *
+ * NOTE: If a fault occurs at the last operation in M{G,S}ETL
+ * LSM_STEP will be 0. ie: we do 4 writes in our case, if
+ * a fault happens at the 4th write, LSM_STEP will be 0
+ * instead of 4. The code copes with that.
*/
#define __asm_copy_from_user_64bit_rapf_loop(to, from, ret, n, id) \
__asm_copy_user_64bit_rapf_loop(to, from, ret, n, id, \
- "SUB %1, %1, #8\n")
+ "LSR D0Ar2, D0Ar2, #5\n" \
+ "ANDS D0Ar2, D0Ar2, #0x38\n" \
+ "ADDZ D0Ar2, D0Ar2, #32\n" \
+ "SUB %1, %1, D0Ar2\n")
/* rewind 'from' pointer when a fault occurs
*
* Rationale:
* A fault occurs while reading from user buffer, which is the
- * source. Since the fault is at a single address, we only
- * need to rewind by 4 bytes.
+ * source.
* Since we don't write to kernel buffer until we read first,
* the kernel buffer is at the right state and needn't be
- * corrected.
+ * corrected, but the source must be rewound to the beginning of
+ * the block, which is LSM_STEP*4 bytes.
+ * LSM_STEP is bits 10:8 in TXSTATUS which is already read
+ * and stored in D0Ar2
+ *
+ * NOTE: If a fault occurs at the last operation in M{G,S}ETL
+ * LSM_STEP will be 0. ie: we do 4 writes in our case, if
+ * a fault happens at the 4th write, LSM_STEP will be 0
+ * instead of 4. The code copes with that.
*/
#define __asm_copy_from_user_32bit_rapf_loop(to, from, ret, n, id) \
__asm_copy_user_32bit_rapf_loop(to, from, ret, n, id, \
- "SUB %1, %1, #4\n")
+ "LSR D0Ar2, D0Ar2, #6\n" \
+ "ANDS D0Ar2, D0Ar2, #0x1c\n" \
+ "ADDZ D0Ar2, D0Ar2, #16\n" \
+ "SUB %1, %1, D0Ar2\n")
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Torvalds <[email protected]>
commit 474c90156c8dcc2fa815e6716cc9394d7930cb9c upstream.
gcc-7 has an "optimization" pass that completely screws up, and
generates the code expansion for the (impossible) case of calling
ilog2() with a zero constant, even when the code gcc compiles does not
actually have a zero constant.
And we try to generate a compile-time error for anybody doing ilog2() on
a constant where that doesn't make sense (be it zero or negative). So
now gcc7 will fail the build due to our sanity checking, because it
created that constant-zero case that didn't actually exist in the source
code.
There's a whole long discussion on the kernel mailing about how to work
around this gcc bug. The gcc people themselevs have discussed their
"feature" in
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=72785
but it's all water under the bridge, because while it looked at one
point like it would be solved by the time gcc7 was released, that was
not to be.
So now we have to deal with this compiler braindamage.
And the only simple approach seems to be to just delete the code that
tries to warn about bad uses of ilog2().
So now "ilog2()" will just return 0 not just for the value 1, but for
any non-positive value too.
It's not like I can recall anybody having ever actually tried to use
this function on any invalid value, but maybe the sanity check just
meant that such code never made it out in public.
Reported-by: Laura Abbott <[email protected]>
Cc: John Stultz <[email protected]>,
Cc: Thomas Gleixner <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/log2.h | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
--- a/include/linux/log2.h
+++ b/include/linux/log2.h
@@ -16,12 +16,6 @@
#include <linux/bitops.h>
/*
- * deal with unrepresentable constant logarithms
- */
-extern __attribute__((const, noreturn))
-int ____ilog2_NaN(void);
-
-/*
* non-constant log of base 2 calculators
* - the arch may override these in asm/bitops.h if they can be implemented
* more efficiently than using fls() and fls64()
@@ -85,7 +79,7 @@ unsigned long __rounddown_pow_of_two(uns
#define ilog2(n) \
( \
__builtin_constant_p(n) ? ( \
- (n) < 1 ? ____ilog2_NaN() : \
+ (n) < 2 ? 0 : \
(n) & (1ULL << 63) ? 63 : \
(n) & (1ULL << 62) ? 62 : \
(n) & (1ULL << 61) ? 61 : \
@@ -148,10 +142,7 @@ unsigned long __rounddown_pow_of_two(uns
(n) & (1ULL << 4) ? 4 : \
(n) & (1ULL << 3) ? 3 : \
(n) & (1ULL << 2) ? 2 : \
- (n) & (1ULL << 1) ? 1 : \
- (n) & (1ULL << 0) ? 0 : \
- ____ilog2_NaN() \
- ) : \
+ 1 ) : \
(sizeof(n) <= 4) ? \
__ilog2_u32(n) : \
__ilog2_u64(n) \
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit fd40eee1290ad7add7aa665e3ce6b0f9fe9734b4 upstream.
The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP
to decide how far to rewind the source pointer. There is a special case
for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0
even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ
which is conditional upon the Z condition flag, but the AND instruction
which masked the TXStatus.LSM_STEP field didn't set the condition flags
based on the result.
Fix that now by using ANDS which does set the flags, and also marking
the condition codes as clobbered by the inline assembly.
Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/lib/usercopy.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -315,7 +315,7 @@
" .previous\n" \
: "=r" (to), "=r" (from), "=r" (ret), "=d" (n) \
: "0" (to), "1" (from), "2" (ret), "3" (n) \
- : "D1Ar1", "D0Ar2", "memory")
+ : "D1Ar1", "D0Ar2", "cc", "memory")
/* rewind 'to' and 'from' pointers when a fault occurs
*
@@ -341,7 +341,7 @@
#define __asm_copy_to_user_64bit_rapf_loop(to, from, ret, n, id)\
__asm_copy_user_64bit_rapf_loop(to, from, ret, n, id, \
"LSR D0Ar2, D0Ar2, #8\n" \
- "AND D0Ar2, D0Ar2, #0x7\n" \
+ "ANDS D0Ar2, D0Ar2, #0x7\n" \
"ADDZ D0Ar2, D0Ar2, #4\n" \
"SUB D0Ar2, D0Ar2, #1\n" \
"MOV D1Ar1, #4\n" \
@@ -486,7 +486,7 @@
" .previous\n" \
: "=r" (to), "=r" (from), "=r" (ret), "=d" (n) \
: "0" (to), "1" (from), "2" (ret), "3" (n) \
- : "D1Ar1", "D0Ar2", "memory")
+ : "D1Ar1", "D0Ar2", "cc", "memory")
/* rewind 'to' and 'from' pointers when a fault occurs
*
@@ -512,7 +512,7 @@
#define __asm_copy_to_user_32bit_rapf_loop(to, from, ret, n, id)\
__asm_copy_user_32bit_rapf_loop(to, from, ret, n, id, \
"LSR D0Ar2, D0Ar2, #8\n" \
- "AND D0Ar2, D0Ar2, #0x7\n" \
+ "ANDS D0Ar2, D0Ar2, #0x7\n" \
"ADDZ D0Ar2, D0Ar2, #4\n" \
"SUB D0Ar2, D0Ar2, #1\n" \
"MOV D1Ar1, #4\n" \
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit fb8ea062a8f2e85256e13f55696c5c5f0dfdcc8b upstream.
When copying to userland on Meta, if any faults are encountered
immediately abort the copy instead of continuing on and repeatedly
faulting, and worse potentially copying further bytes successfully to
subsequent valid pages.
Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <[email protected]>
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/lib/usercopy.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -538,23 +538,31 @@ unsigned long __copy_user(void __user *p
if ((unsigned long) src & 1) {
__asm_copy_to_user_1(dst, src, retn);
n--;
+ if (retn)
+ return retn + n;
}
if ((unsigned long) dst & 1) {
/* Worst case - byte copy */
while (n > 0) {
__asm_copy_to_user_1(dst, src, retn);
n--;
+ if (retn)
+ return retn + n;
}
}
if (((unsigned long) src & 2) && n >= 2) {
__asm_copy_to_user_2(dst, src, retn);
n -= 2;
+ if (retn)
+ return retn + n;
}
if ((unsigned long) dst & 2) {
/* Second worst case - word copy */
while (n >= 2) {
__asm_copy_to_user_2(dst, src, retn);
n -= 2;
+ if (retn)
+ return retn + n;
}
}
@@ -569,6 +577,8 @@ unsigned long __copy_user(void __user *p
while (n >= 8) {
__asm_copy_to_user_8x64(dst, src, retn);
n -= 8;
+ if (retn)
+ return retn + n;
}
}
if (n >= RAPF_MIN_BUF_SIZE) {
@@ -581,6 +591,8 @@ unsigned long __copy_user(void __user *p
while (n >= 8) {
__asm_copy_to_user_8x64(dst, src, retn);
n -= 8;
+ if (retn)
+ return retn + n;
}
}
#endif
@@ -588,11 +600,15 @@ unsigned long __copy_user(void __user *p
while (n >= 16) {
__asm_copy_to_user_16(dst, src, retn);
n -= 16;
+ if (retn)
+ return retn + n;
}
while (n >= 4) {
__asm_copy_to_user_4(dst, src, retn);
n -= 4;
+ if (retn)
+ return retn + n;
}
switch (n) {
@@ -609,6 +625,10 @@ unsigned long __copy_user(void __user *p
break;
}
+ /*
+ * If we get here, retn correctly reflects the number of failing
+ * bytes.
+ */
return retn;
}
EXPORT_SYMBOL(__copy_user);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 563ddc1076109f2b3f88e6d355eab7b6fd4662cb upstream.
Currently we try to zero the destination for a failed read from userland
in fixup code in the usercopy.c macros. The rest of the destination
buffer is then zeroed from __copy_user_zeroing(), which is used for both
copy_from_user() and __copy_from_user().
Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0
before the fixup code entry labels, and __copy_from_user() shouldn't even
be zeroing the rest of the buffer.
Move the zeroing out into copy_from_user() and rename
__copy_user_zeroing() to raw_copy_from_user() since it no longer does
any zeroing. This also conveniently matches the name needed for
RAW_COPY_USER support in a later patch.
Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <[email protected]>
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/include/asm/uaccess.h | 15 +++++-----
arch/metag/lib/usercopy.c | 57 ++++++++++++---------------------------
2 files changed, 26 insertions(+), 46 deletions(-)
--- a/arch/metag/include/asm/uaccess.h
+++ b/arch/metag/include/asm/uaccess.h
@@ -192,20 +192,21 @@ extern long __must_check strnlen_user(co
#define strlen_user(str) strnlen_user(str, 32767)
-extern unsigned long __must_check __copy_user_zeroing(void *to,
- const void __user *from,
- unsigned long n);
+extern unsigned long raw_copy_from_user(void *to, const void __user *from,
+ unsigned long n);
static inline unsigned long
copy_from_user(void *to, const void __user *from, unsigned long n)
{
+ unsigned long res = n;
if (likely(access_ok(VERIFY_READ, from, n)))
- return __copy_user_zeroing(to, from, n);
- memset(to, 0, n);
- return n;
+ res = raw_copy_from_user(to, from, n);
+ if (unlikely(res))
+ memset(to + (n - res), 0, res);
+ return res;
}
-#define __copy_from_user(to, from, n) __copy_user_zeroing(to, from, n)
+#define __copy_from_user(to, from, n) raw_copy_from_user(to, from, n)
#define __copy_from_user_inatomic __copy_from_user
extern unsigned long __must_check __copy_user(void __user *to,
--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -29,7 +29,6 @@
COPY \
"1:\n" \
" .section .fixup,\"ax\"\n" \
- " MOV D1Ar1,#0\n" \
FIXUP \
" MOVT D1Ar1,#HI(1b)\n" \
" JUMP D1Ar1,#LO(1b)\n" \
@@ -637,16 +636,14 @@ EXPORT_SYMBOL(__copy_user);
__asm_copy_user_cont(to, from, ret, \
" GETB D1Ar1,[%1++]\n" \
"2: SETB [%0++],D1Ar1\n", \
- "3: ADD %2,%2,#1\n" \
- " SETB [%0++],D1Ar1\n", \
+ "3: ADD %2,%2,#1\n", \
" .long 2b,3b\n")
#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
__asm_copy_user_cont(to, from, ret, \
" GETW D1Ar1,[%1++]\n" \
"2: SETW [%0++],D1Ar1\n" COPY, \
- "3: ADD %2,%2,#2\n" \
- " SETW [%0++],D1Ar1\n" FIXUP, \
+ "3: ADD %2,%2,#2\n" FIXUP, \
" .long 2b,3b\n" TENTRY)
#define __asm_copy_from_user_2(to, from, ret) \
@@ -656,32 +653,26 @@ EXPORT_SYMBOL(__copy_user);
__asm_copy_from_user_2x_cont(to, from, ret, \
" GETB D1Ar1,[%1++]\n" \
"4: SETB [%0++],D1Ar1\n", \
- "5: ADD %2,%2,#1\n" \
- " SETB [%0++],D1Ar1\n", \
+ "5: ADD %2,%2,#1\n", \
" .long 4b,5b\n")
#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
__asm_copy_user_cont(to, from, ret, \
" GETD D1Ar1,[%1++]\n" \
"2: SETD [%0++],D1Ar1\n" COPY, \
- "3: ADD %2,%2,#4\n" \
- " SETD [%0++],D1Ar1\n" FIXUP, \
+ "3: ADD %2,%2,#4\n" FIXUP, \
" .long 2b,3b\n" TENTRY)
#define __asm_copy_from_user_4(to, from, ret) \
__asm_copy_from_user_4x_cont(to, from, ret, "", "", "")
-
#define __asm_copy_from_user_8x64(to, from, ret) \
asm volatile ( \
" GETL D0Ar2,D1Ar1,[%1++]\n" \
"2: SETL [%0++],D0Ar2,D1Ar1\n" \
"1:\n" \
" .section .fixup,\"ax\"\n" \
- " MOV D1Ar1,#0\n" \
- " MOV D0Ar2,#0\n" \
"3: ADD %2,%2,#8\n" \
- " SETL [%0++],D0Ar2,D1Ar1\n" \
" MOVT D0Ar2,#HI(1b)\n" \
" JUMP D0Ar2,#LO(1b)\n" \
" .previous\n" \
@@ -721,11 +712,12 @@ EXPORT_SYMBOL(__copy_user);
"SUB %1, %1, #4\n")
-/* Copy from user to kernel, zeroing the bytes that were inaccessible in
- userland. The return-value is the number of bytes that were
- inaccessible. */
-unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
- unsigned long n)
+/*
+ * Copy from user to kernel. The return-value is the number of bytes that were
+ * inaccessible.
+ */
+unsigned long raw_copy_from_user(void *pdst, const void __user *psrc,
+ unsigned long n)
{
register char *dst asm ("A0.2") = pdst;
register const char __user *src asm ("A1.2") = psrc;
@@ -738,7 +730,7 @@ unsigned long __copy_user_zeroing(void *
__asm_copy_from_user_1(dst, src, retn);
n--;
if (retn)
- goto copy_exception_bytes;
+ return retn + n;
}
if ((unsigned long) dst & 1) {
/* Worst case - byte copy */
@@ -746,14 +738,14 @@ unsigned long __copy_user_zeroing(void *
__asm_copy_from_user_1(dst, src, retn);
n--;
if (retn)
- goto copy_exception_bytes;
+ return retn + n;
}
}
if (((unsigned long) src & 2) && n >= 2) {
__asm_copy_from_user_2(dst, src, retn);
n -= 2;
if (retn)
- goto copy_exception_bytes;
+ return retn + n;
}
if ((unsigned long) dst & 2) {
/* Second worst case - word copy */
@@ -761,7 +753,7 @@ unsigned long __copy_user_zeroing(void *
__asm_copy_from_user_2(dst, src, retn);
n -= 2;
if (retn)
- goto copy_exception_bytes;
+ return retn + n;
}
}
@@ -777,7 +769,7 @@ unsigned long __copy_user_zeroing(void *
__asm_copy_from_user_8x64(dst, src, retn);
n -= 8;
if (retn)
- goto copy_exception_bytes;
+ return retn + n;
}
}
@@ -793,7 +785,7 @@ unsigned long __copy_user_zeroing(void *
__asm_copy_from_user_8x64(dst, src, retn);
n -= 8;
if (retn)
- goto copy_exception_bytes;
+ return retn + n;
}
}
#endif
@@ -803,7 +795,7 @@ unsigned long __copy_user_zeroing(void *
n -= 4;
if (retn)
- goto copy_exception_bytes;
+ return retn + n;
}
/* If we get here, there were no memory read faults. */
@@ -829,21 +821,8 @@ unsigned long __copy_user_zeroing(void *
/* If we get here, retn correctly reflects the number of failing
bytes. */
return retn;
-
- copy_exception_bytes:
- /* We already have "retn" bytes cleared, and need to clear the
- remaining "n" bytes. A non-optimized simple byte-for-byte in-line
- memset is preferred here, since this isn't speed-critical code and
- we'd rather have this a leaf-function than calling memset. */
- {
- char *endp;
- for (endp = dst + n; dst < endp; dst++)
- *dst = 0;
- }
-
- return retn + n;
}
-EXPORT_SYMBOL(__copy_user_zeroing);
+EXPORT_SYMBOL(raw_copy_from_user);
#define __asm_clear_8x64(to, ret) \
asm volatile ( \
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 1916d319271664241b7aa0cd2b05e32bdb310ce9 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack control-interface endpoints.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/misc/ims-pcu.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -1667,6 +1667,10 @@ static int ims_pcu_parse_cdc_data(struct
return -EINVAL;
alt = pcu->ctrl_intf->cur_altsetting;
+
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
pcu->ep_ctrl = &alt->endpoint[0].desc;
pcu->max_ctrl_size = usb_endpoint_maxp(pcu->ep_ctrl);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Yongjun <[email protected]>
commit 62277de758b155dc04b78f195a1cb5208c37b2df upstream.
In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 6c43e554a ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ring_buffer.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -4883,9 +4883,9 @@ static __init int test_ringbuffer(void)
rb_data[cpu].cnt = cpu;
rb_threads[cpu] = kthread_create(rb_test, &rb_data[cpu],
"rbtester/%d", cpu);
- if (WARN_ON(!rb_threads[cpu])) {
+ if (WARN_ON(IS_ERR(rb_threads[cpu]))) {
pr_cont("FAILED\n");
- ret = -1;
+ ret = PTR_ERR(rb_threads[cpu]);
goto out_free;
}
@@ -4895,9 +4895,9 @@ static __init int test_ringbuffer(void)
/* Now create the rb hammer! */
rb_hammer = kthread_run(rb_hammer_test, NULL, "rbhammer");
- if (WARN_ON(!rb_hammer)) {
+ if (WARN_ON(IS_ERR(rb_hammer))) {
pr_cont("FAILED\n");
- ret = -1;
+ ret = PTR_ERR(rb_hammer);
goto out_free;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 5cc4a1a9f5c179795c8a1f2b0f4361829d6a070e upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Fixes: aca951a22a1d ("[PATCH] input-driver-yealink-P1K-usb-phone")
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/misc/yealink.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -875,6 +875,10 @@ static int usb_probe(struct usb_interfac
int ret, pipe, i;
interface = intf->cur_altsetting;
+
+ if (interface->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
endpoint = &interface->endpoint[0].desc;
if (!usb_endpoint_is_int_in(endpoint))
return -ENODEV;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit cb1b494663e037253337623bf1ef2df727883cb7 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/tablet/kbtab.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/input/tablet/kbtab.c
+++ b/drivers/input/tablet/kbtab.c
@@ -122,6 +122,9 @@ static int kbtab_probe(struct usb_interf
struct input_dev *input_dev;
int error = -ENOMEM;
+ if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
input_dev = input_allocate_device();
if (!kbtab || !input_dev)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen <[email protected]>
commit 0115f6cbf26663c86496bc56eeea293f85b77897 upstream.
On VTLB+FTLB platforms (such as Loongson-3A R2), FTLB's pagesize is
usually configured the same as PAGE_SIZE. In such a case, Huge page
entry is not suitable to write in FTLB.
Unfortunately, when a huge page is created, its page table entries
haven't created immediately. Then the TLB refill handler will fetch an
invalid page table entry which has no "HUGE" bit, and this entry may be
written to FTLB. Since it is invalid, TLB load/store handler will then
use tlbwi to write the valid entry at the same place. However, the
valid entry is a huge page entry which isn't suitable for FTLB.
Our solution is to modify build_huge_handler_tail. Flush the invalid
old entry (whether it is in FTLB or VTLB, this is in order to reduce
branches) and use tlbwr to write the valid new entry.
Signed-off-by: Rui Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Cc: John Crispin <[email protected]>
Cc: Steven J . Hill <[email protected]>
Cc: Fuxin Zhang <[email protected]>
Cc: Zhangjin Wu <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/15754/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/mm/tlbex.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -754,7 +754,8 @@ static void build_huge_update_entries(u3
static void build_huge_handler_tail(u32 **p, struct uasm_reloc **r,
struct uasm_label **l,
unsigned int pte,
- unsigned int ptr)
+ unsigned int ptr,
+ unsigned int flush)
{
#ifdef CONFIG_SMP
UASM_i_SC(p, pte, 0, ptr);
@@ -763,6 +764,22 @@ static void build_huge_handler_tail(u32
#else
UASM_i_SW(p, pte, 0, ptr);
#endif
+ if (cpu_has_ftlb && flush) {
+ BUG_ON(!cpu_has_tlbinv);
+
+ UASM_i_MFC0(p, ptr, C0_ENTRYHI);
+ uasm_i_ori(p, ptr, ptr, MIPS_ENTRYHI_EHINV);
+ UASM_i_MTC0(p, ptr, C0_ENTRYHI);
+ build_tlb_write_entry(p, l, r, tlb_indexed);
+
+ uasm_i_xori(p, ptr, ptr, MIPS_ENTRYHI_EHINV);
+ UASM_i_MTC0(p, ptr, C0_ENTRYHI);
+ build_huge_update_entries(p, pte, ptr);
+ build_huge_tlb_write_entry(p, l, r, pte, tlb_random, 0);
+
+ return;
+ }
+
build_huge_update_entries(p, pte, ptr);
build_huge_tlb_write_entry(p, l, r, pte, tlb_indexed, 0);
}
@@ -2061,7 +2078,7 @@ static void build_r4000_tlb_load_handler
uasm_l_tlbl_goaround2(&l, p);
}
uasm_i_ori(&p, wr.r1, wr.r1, (_PAGE_ACCESSED | _PAGE_VALID));
- build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2);
+ build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2, 1);
#endif
uasm_l_nopage_tlbl(&l, p);
@@ -2116,7 +2133,7 @@ static void build_r4000_tlb_store_handle
build_tlb_probe_entry(&p);
uasm_i_ori(&p, wr.r1, wr.r1,
_PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
- build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2);
+ build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2, 1);
#endif
uasm_l_nopage_tlbs(&l, p);
@@ -2172,7 +2189,7 @@ static void build_r4000_tlb_modify_handl
build_tlb_probe_entry(&p);
uasm_i_ori(&p, wr.r1, wr.r1,
_PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
- build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2);
+ build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2, 0);
#endif
uasm_l_nopage_tlbm(&l, p);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Naoya Horiguchi <[email protected]>
commit c9d398fa237882ea07167e23bcfc5e6847066518 upstream.
I found the race condition which triggers the following bug when
move_pages() and soft offline are called on a single hugetlb page
concurrently.
Soft offlining page 0x119400 at 0x700000000000
BUG: unable to handle kernel paging request at ffffea0011943820
IP: follow_huge_pmd+0x143/0x190
PGD 7ffd2067
PUD 7ffd1067
PMD 0
[61163.582052] Oops: 0000 [#1] SMP
Modules linked in: binfmt_misc ppdev virtio_balloon parport_pc pcspkr i2c_piix4 parport i2c_core acpi_cpufreq ip_tables xfs libcrc32c ata_generic pata_acpi virtio_blk 8139too crc32c_intel ata_piix serio_raw libata virtio_pci 8139cp virtio_ring virtio mii floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: cap_check]
CPU: 0 PID: 22573 Comm: iterate_numa_mo Tainted: P OE 4.11.0-rc2-mm1+ #2
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:follow_huge_pmd+0x143/0x190
RSP: 0018:ffffc90004bdbcd0 EFLAGS: 00010202
RAX: 0000000465003e80 RBX: ffffea0004e34d30 RCX: 00003ffffffff000
RDX: 0000000011943800 RSI: 0000000000080001 RDI: 0000000465003e80
RBP: ffffc90004bdbd18 R08: 0000000000000000 R09: ffff880138d34000
R10: ffffea0004650000 R11: 0000000000c363b0 R12: ffffea0011943800
R13: ffff8801b8d34000 R14: ffffea0000000000 R15: 000077ff80000000
FS: 00007fc977710740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffea0011943820 CR3: 000000007a746000 CR4: 00000000001406f0
Call Trace:
follow_page_mask+0x270/0x550
SYSC_move_pages+0x4ea/0x8f0
SyS_move_pages+0xe/0x10
do_syscall_64+0x67/0x180
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7fc976e03949
RSP: 002b:00007ffe72221d88 EFLAGS: 00000246 ORIG_RAX: 0000000000000117
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc976e03949
RDX: 0000000000c22390 RSI: 0000000000001400 RDI: 0000000000005827
RBP: 00007ffe72221e00 R08: 0000000000c2c3a0 R09: 0000000000000004
R10: 0000000000c363b0 R11: 0000000000000246 R12: 0000000000400650
R13: 00007ffe72221ee0 R14: 0000000000000000 R15: 0000000000000000
Code: 81 e4 ff ff 1f 00 48 21 c2 49 c1 ec 0c 48 c1 ea 0c 4c 01 e2 49 bc 00 00 00 00 00 ea ff ff 48 c1 e2 06 49 01 d4 f6 45 bc 04 74 90 <49> 8b 7c 24 20 40 f6 c7 01 75 2b 4c 89 e7 8b 47 1c 85 c0 7e 2a
RIP: follow_huge_pmd+0x143/0x190 RSP: ffffc90004bdbcd0
CR2: ffffea0011943820
---[ end trace e4f81353a2d23232 ]---
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
This bug is triggered when pmd_present() returns true for non-present
hugetlb, so fixing the present check in follow_huge_pmd() prevents it.
Using pmd_present() to determine present/non-present for hugetlb is not
correct, because pmd_present() checks multiple bits (not only
_PAGE_PRESENT) for historical reason and it can misjudge hugetlb state.
Fixes: e66f17ff7177 ("mm/hugetlb: take page table lock in follow_huge_pmd()")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Naoya Horiguchi <[email protected]>
Acked-by: Hillf Danton <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/hugetlb.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3753,6 +3753,7 @@ follow_huge_pmd(struct mm_struct *mm, un
{
struct page *page = NULL;
spinlock_t *ptl;
+ pte_t pte;
retry:
ptl = pmd_lockptr(mm, pmd);
spin_lock(ptl);
@@ -3762,13 +3763,14 @@ retry:
*/
if (!pmd_huge(*pmd))
goto out;
- if (pmd_present(*pmd)) {
+ pte = huge_ptep_get((pte_t *)pmd);
+ if (pte_present(pte)) {
page = pte_page(*(pte_t *)pmd) +
((address & ~PMD_MASK) >> PAGE_SHIFT);
if (flags & FOLL_GET)
get_page(page);
} else {
- if (is_hugetlb_entry_migration(huge_ptep_get((pte_t *)pmd))) {
+ if (is_hugetlb_entry_migration(pte)) {
spin_unlock(ptl);
__migration_entry_wait(mm, (pte_t *)pmd, ptl);
goto retry;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 59cf8bed44a79ec42303151dd014fdb6434254bb upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory that lie beyond the end of the endpoint
array should a malicious device lack the expected endpoints.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/joystick/iforce/iforce-usb.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -141,6 +141,9 @@ static int iforce_usb_probe(struct usb_i
interface = intf->cur_altsetting;
+ if (interface->desc.bNumEndpoints < 2)
+ return -ENODEV;
+
epirq = &interface->endpoint[0].desc;
epout = &interface->endpoint[1].desc;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ladi Prosek <[email protected]>
commit fc8653228c8588a120f6b5dad6983b7b61ff669e upstream.
When init_vqs runs, virtio_balloon.stats is either uninitialized or
contains stale values. The host updates its state with garbage data
because it has no way of knowing that this is just a marker buffer
used for signaling.
This patch updates the stats before pushing the initial buffer.
Alternative fixes:
* Push an empty buffer in init_vqs. Not easily done with the current
virtio implementation and violates the spec "Driver MUST supply the
same subset of statistics in all buffers submitted to the statsq".
* Push a buffer with invalid tags in init_vqs. Violates the same
spec clause, plus "invalid tag" is not really defined.
Note: the spec says:
When using the legacy interface, the device SHOULD ignore all values in
the first buffer in the statsq supplied by the driver after device
initialization. Note: Historically, drivers supplied an uninitialized
buffer in the first buffer.
Unfortunately QEMU does not seem to implement the recommendation
even for the legacy interface.
Signed-off-by: Ladi Prosek <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/virtio/virtio_balloon.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -355,6 +355,8 @@ static int init_vqs(struct virtio_balloo
* Prime this virtqueue with one buffer so the hypervisor can
* use it to signal us later (it can't be broken yet!).
*/
+ update_balloon_stats(vb);
+
sg_init_one(&sg, vb->stats, sizeof vb->stats);
if (virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb, GFP_KERNEL)
< 0)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
commit a6566710adaa4a7dd5e0d99820ff9c9c30ee5951 upstream.
Clearing the status bit on irq_unmask will discard any pending interrupt
that did arrive after the irq_ack, i.e. while the IRQ handler function
was executing.
Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Cc: Stephen Boyd <[email protected]>
Reported-by: Timur Tabi <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -616,10 +616,6 @@ static void msm_gpio_irq_unmask(struct i
spin_lock_irqsave(&pctrl->lock, flags);
- val = readl(pctrl->regs + g->intr_status_reg);
- val &= ~BIT(g->intr_status_bit);
- writel(val, pctrl->regs + g->intr_status_reg);
-
val = readl(pctrl->regs + g->intr_cfg_reg);
val |= BIT(g->intr_enable_bit);
writel(val, pctrl->regs + g->intr_cfg_reg);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Henrik Ingo <[email protected]>
commit e950267ab802c8558f1100eafd4087fd039ad634 upstream.
Some devices have invalid baSourceID references, causing uvc_scan_chain()
to fail, but if we just take the entities we can find and put them
together in the most sensible chain we can think of, turns out they do
work anyway. Note: This heuristic assumes there is a single chain.
At the time of writing, devices known to have such a broken chain are
- Acer Integrated Camera (5986:055a)
- Realtek rtl157a7 (0bda:57a7)
Signed-off-by: Henrik Ingo <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/uvc/uvc_driver.c | 118 +++++++++++++++++++++++++++++++++++--
1 file changed, 112 insertions(+), 6 deletions(-)
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -1553,6 +1553,114 @@ static const char *uvc_print_chain(struc
return buffer;
}
+static struct uvc_video_chain *uvc_alloc_chain(struct uvc_device *dev)
+{
+ struct uvc_video_chain *chain;
+
+ chain = kzalloc(sizeof(*chain), GFP_KERNEL);
+ if (chain == NULL)
+ return NULL;
+
+ INIT_LIST_HEAD(&chain->entities);
+ mutex_init(&chain->ctrl_mutex);
+ chain->dev = dev;
+ v4l2_prio_init(&chain->prio);
+
+ return chain;
+}
+
+/*
+ * Fallback heuristic for devices that don't connect units and terminals in a
+ * valid chain.
+ *
+ * Some devices have invalid baSourceID references, causing uvc_scan_chain()
+ * to fail, but if we just take the entities we can find and put them together
+ * in the most sensible chain we can think of, turns out they do work anyway.
+ * Note: This heuristic assumes there is a single chain.
+ *
+ * At the time of writing, devices known to have such a broken chain are
+ * - Acer Integrated Camera (5986:055a)
+ * - Realtek rtl157a7 (0bda:57a7)
+ */
+static int uvc_scan_fallback(struct uvc_device *dev)
+{
+ struct uvc_video_chain *chain;
+ struct uvc_entity *iterm = NULL;
+ struct uvc_entity *oterm = NULL;
+ struct uvc_entity *entity;
+ struct uvc_entity *prev;
+
+ /*
+ * Start by locating the input and output terminals. We only support
+ * devices with exactly one of each for now.
+ */
+ list_for_each_entry(entity, &dev->entities, list) {
+ if (UVC_ENTITY_IS_ITERM(entity)) {
+ if (iterm)
+ return -EINVAL;
+ iterm = entity;
+ }
+
+ if (UVC_ENTITY_IS_OTERM(entity)) {
+ if (oterm)
+ return -EINVAL;
+ oterm = entity;
+ }
+ }
+
+ if (iterm == NULL || oterm == NULL)
+ return -EINVAL;
+
+ /* Allocate the chain and fill it. */
+ chain = uvc_alloc_chain(dev);
+ if (chain == NULL)
+ return -ENOMEM;
+
+ if (uvc_scan_chain_entity(chain, oterm) < 0)
+ goto error;
+
+ prev = oterm;
+
+ /*
+ * Add all Processing and Extension Units with two pads. The order
+ * doesn't matter much, use reverse list traversal to connect units in
+ * UVC descriptor order as we build the chain from output to input. This
+ * leads to units appearing in the order meant by the manufacturer for
+ * the cameras known to require this heuristic.
+ */
+ list_for_each_entry_reverse(entity, &dev->entities, list) {
+ if (entity->type != UVC_VC_PROCESSING_UNIT &&
+ entity->type != UVC_VC_EXTENSION_UNIT)
+ continue;
+
+ if (entity->num_pads != 2)
+ continue;
+
+ if (uvc_scan_chain_entity(chain, entity) < 0)
+ goto error;
+
+ prev->baSourceID[0] = entity->id;
+ prev = entity;
+ }
+
+ if (uvc_scan_chain_entity(chain, iterm) < 0)
+ goto error;
+
+ prev->baSourceID[0] = iterm->id;
+
+ list_add_tail(&chain->list, &dev->chains);
+
+ uvc_trace(UVC_TRACE_PROBE,
+ "Found a video chain by fallback heuristic (%s).\n",
+ uvc_print_chain(chain));
+
+ return 0;
+
+error:
+ kfree(chain);
+ return -EINVAL;
+}
+
/*
* Scan the device for video chains and register video devices.
*
@@ -1575,15 +1683,10 @@ static int uvc_scan_device(struct uvc_de
if (term->chain.next || term->chain.prev)
continue;
- chain = kzalloc(sizeof(*chain), GFP_KERNEL);
+ chain = uvc_alloc_chain(dev);
if (chain == NULL)
return -ENOMEM;
- INIT_LIST_HEAD(&chain->entities);
- mutex_init(&chain->ctrl_mutex);
- chain->dev = dev;
- v4l2_prio_init(&chain->prio);
-
term->flags |= UVC_ENTITY_FLAG_DEFAULT;
if (uvc_scan_chain(chain, term) < 0) {
@@ -1597,6 +1700,9 @@ static int uvc_scan_device(struct uvc_de
list_add_tail(&chain->list, &dev->chains);
}
+ if (list_empty(&dev->chains))
+ uvc_scan_fallback(dev);
+
if (list_empty(&dev->chains)) {
uvc_printk(KERN_INFO, "No valid video chain found.\n");
return -1;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauricio Faria de Oliveira <[email protected]>
commit 25cdb64510644f3e854d502d69c73f21c6df88a9 upstream.
The WRITE_SAME commands are not present in the blk_default_cmd_filter
write_ok list, and thus are failed with -EPERM when the SG_IO ioctl()
is executed without CAP_SYS_RAWIO capability (e.g., unprivileged users).
[ sg_io() -> blk_fill_sghdr_rq() > blk_verify_command() -> -EPERM ]
The problem can be reproduced with the sg_write_same command
# sg_write_same --num 1 --xferlen 512 /dev/sda
#
# capsh --drop=cap_sys_rawio -- -c \
'sg_write_same --num 1 --xferlen 512 /dev/sda'
Write same: pass through os error: Operation not permitted
#
For comparison, the WRITE_VERIFY command does not observe this problem,
since it is in that list:
# capsh --drop=cap_sys_rawio -- -c \
'sg_write_verify --num 1 --ilen 512 --lba 0 /dev/sda'
#
So, this patch adds the WRITE_SAME commands to the list, in order
for the SG_IO ioctl to finish successfully:
# capsh --drop=cap_sys_rawio -- -c \
'sg_write_same --num 1 --xferlen 512 /dev/sda'
#
That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices
(qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]),
which employs the SG_IO ioctl() and runs as an unprivileged user (libvirt-qemu).
In that scenario, when a filesystem (e.g., ext4) performs its zero-out calls,
which are translated to write-same calls in the guest kernel, and then into
SG_IO ioctls to the host kernel, SCSI I/O errors may be observed in the guest:
[...] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[...] sd 0:0:0:0: [sda] tag#0 Sense Key : Aborted Command [current]
[...] sd 0:0:0:0: [sda] tag#0 Add. Sense: I/O process terminated
[...] sd 0:0:0:0: [sda] tag#0 CDB: Write Same(10) 41 00 01 04 e0 78 00 00 08 00
[...] blk_update_request: I/O error, dev sda, sector 17096824
Links:
[1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52
[2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device')
Signed-off-by: Mauricio Faria de Oliveira <[email protected]>
Signed-off-by: Brahadambal Srinivasan <[email protected]>
Reported-by: Manjunatha H R <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/scsi_ioctl.c | 3 +++
1 file changed, 3 insertions(+)
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -182,6 +182,9 @@ static void blk_set_cmd_filter_defaults(
__set_bit(WRITE_16, filter->write_ok);
__set_bit(WRITE_LONG, filter->write_ok);
__set_bit(WRITE_LONG_2, filter->write_ok);
+ __set_bit(WRITE_SAME, filter->write_ok);
+ __set_bit(WRITE_SAME_16, filter->write_ok);
+ __set_bit(WRITE_SAME_32, filter->write_ok);
__set_bit(ERASE, filter->write_ok);
__set_bit(GPCMD_MODE_SELECT_10, filter->write_ok);
__set_bit(MODE_SELECT, filter->write_ok);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Sandeen <[email protected]>
commit 4dfce57db6354603641132fac3c887614e3ebe81 upstream.
There have been several reports over the years of NULL pointer
dereferences in xfs_trans_log_inode during xfs_fsr processes,
when the process is doing an fput and tearing down extents
on the temporary inode, something like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
PID: 29439 TASK: ffff880550584fa0 CPU: 6 COMMAND: "xfs_fsr"
[exception RIP: xfs_trans_log_inode+0x10]
#9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs]
#10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs]
#11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs]
#12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs]
#13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs]
#14 [ffff8800a57bbe00] evict at ffffffff811e1b67
#15 [ffff8800a57bbe28] iput at ffffffff811e23a5
#16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8
#17 [ffff8800a57bbe88] dput at ffffffff811dd06c
#18 [ffff8800a57bbea8] __fput at ffffffff811c823b
#19 [ffff8800a57bbef0] ____fput at ffffffff811c846e
#20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27
#21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c
#22 [ffff8800a57bbf50] int_signal at ffffffff8161405d
As it turns out, this is because the i_itemp pointer, along
with the d_ops pointer, has been overwritten with zeros
when we tear down the extents during truncate. When the in-core
inode fork on the temporary inode used by xfs_fsr was originally
set up during the extent swap, we mistakenly looked at di_nextents
to determine whether all extents fit inline, but this misses extents
generated by speculative preallocation; we should be using if_bytes
instead.
This mistake corrupts the in-memory inode, and code in
xfs_iext_remove_inline eventually gets bad inputs, causing
it to memmove and memset incorrect ranges; this became apparent
because the two values in ifp->if_u2.if_inline_ext[1] contained
what should have been in d_ops and i_itemp; they were memmoved due
to incorrect array indexing and then the original locations
were zeroed with memset, again due to an array overrun.
Fix this by properly using i_df.if_bytes to determine the number
of extents, not di_nextents.
Thanks to dchinner for looking at this with me and spotting the
root cause.
[nborisov: backported to 4.4]
Signed-off-by: Eric Sandeen <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
Signed-off-by: Nikolay Borisov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/xfs_bmap_util.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -1622,6 +1622,7 @@ xfs_swap_extents(
xfs_trans_t *tp;
xfs_bstat_t *sbp = &sxp->sx_stat;
xfs_ifork_t *tempifp, *ifp, *tifp;
+ xfs_extnum_t nextents;
int src_log_flags, target_log_flags;
int error = 0;
int aforkblks = 0;
@@ -1802,7 +1803,8 @@ xfs_swap_extents(
* pointer. Otherwise it's already NULL or
* pointing to the extent.
*/
- if (ip->i_d.di_nextents <= XFS_INLINE_EXTS) {
+ nextents = ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
+ if (nextents <= XFS_INLINE_EXTS) {
ifp->if_u1.if_extents =
ifp->if_u2.if_inline_ext;
}
@@ -1821,7 +1823,8 @@ xfs_swap_extents(
* pointer. Otherwise it's already NULL or
* pointing to the extent.
*/
- if (tip->i_d.di_nextents <= XFS_INLINE_EXTS) {
+ nextents = tip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
+ if (nextents <= XFS_INLINE_EXTS) {
tifp->if_u1.if_extents =
tifp->if_u2.if_inline_ext;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf <[email protected]>
commit 61b79e16c68d703dde58c25d3935d67210b7d71b upstream.
Paul Menzel reported a warning:
WARNING: CPU: 0 PID: 774 at /build/linux-ROBWaj/linux-4.9.13/kernel/trace/trace_functions_graph.c:233 ftrace_return_to_handler+0x1aa/0x1e0
Bad frame pointer: expected f6919d98, received f6919db0
from func acpi_pm_device_sleep_wake return to c43b6f9d
The warning means that function graph tracing is broken for the
acpi_pm_device_sleep_wake() function. That's because the ACPI Makefile
unconditionally sets the '-Os' gcc flag to optimize for size. That's an
issue because mcount-based function graph tracing is incompatible with
'-Os' on x86, thanks to the following gcc bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109
I have another patch pending which will ensure that mcount-based
function graph tracing is never used with CONFIG_CC_OPTIMIZE_FOR_SIZE on
x86.
But this patch is needed in addition to that one because the ACPI
Makefile overrides that config option for no apparent reason. It has
had this flag since the beginning of git history, and there's no related
comment, so I don't know why it's there. As far as I can tell, there's
no reason for it to be there. The appropriate behavior is for it to
honor CONFIG_CC_OPTIMIZE_FOR_{SIZE,PERFORMANCE} like the rest of the
kernel.
Reported-by: Paul Menzel <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/Makefile | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -2,7 +2,6 @@
# Makefile for the Linux ACPI interpreter
#
-ccflags-y := -Os
ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
#
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Darrick J. Wong <[email protected]>
commit 2aa6ba7b5ad3189cc27f14540aa2f57f0ed8df4b upstream.
If we try to allocate memory pages to back an xfs_buf that we're trying
to read, it's possible that we'll be so short on memory that the page
allocation fails. For a blocking read we'll just wait, but for
readahead we simply dump all the pages we've collected so far.
Unfortunately, after dumping the pages we neglect to clear the
_XBF_PAGES state, which means that the subsequent call to xfs_buf_free
thinks that b_pages still points to pages we own. It then double-frees
the b_pages pages.
This results in screaming about negative page refcounts from the memory
manager, which xfs oughtn't be triggering. To reproduce this case,
mount a filesystem where the size of the inodes far outweighs the
availalble memory (a ~500M inode filesystem on a VM with 300MB memory
did the trick here) and run bulkstat in parallel with other memory
eating processes to put a huge load on the system. The "check summary"
phase of xfs_scrub also works for this purpose.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Eric Sandeen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/xfs_buf.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -376,6 +376,7 @@ retry:
out_free_pages:
for (i = 0; i < bp->b_page_count; i++)
__free_page(bp->b_pages[i]);
+ bp->b_flags &= ~_XBF_PAGES;
return error;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
commit 45838660e34d90db8d4f7cbc8fd66e8aff79f4fe upstream.
The aux port does not get detected without noloop quirk, so external PS/2
mouse cannot work as result.
The PS/2 mouse can work with this quirk.
BugLink: https://bugs.launchpad.net/bugs/1591053
Signed-off-by: Kai-Heng Feng <[email protected]>
Reviewed-by: Marcos Paulo de Souza <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -120,6 +120,13 @@ static const struct dmi_system_id __init
},
},
{
+ /* Dell Embedded Box PC 3000 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Embedded Box PC 3000"),
+ },
+ },
+ {
/* OQO Model 01 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Herrenschmidt <[email protected]>
commit 7ed23e1bae8bf7e37fd555066550a00b95a3a98b upstream.
On Power8 & Power9 the early CPU inititialisation in __init_HFSCR()
turns on HFSCR[TM] (Hypervisor Facility Status and Control Register
[Transactional Memory]), but that doesn't take into account that TM
might be disabled by CPU features, or disabled by the kernel being built
with CONFIG_PPC_TRANSACTIONAL_MEM=n.
So later in boot, when we have setup the CPU features, clear HSCR[TM] if
the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account
for the CONFIG_PPC_TRANSACTIONAL_MEM=n case.
Without this a KVM guest might try use TM, even if told not to, and
cause an oops in the host kernel. Typically the oops is seen in
__kvmppc_vcore_entry() and may or may not be fatal to the host, but is
always bad news.
In practice all shipping CPU revisions do support TM, and all host
kernels we are aware of build with TM support enabled, so no one should
actually be able to hit this in the wild.
Fixes: 2a3563b023e5 ("powerpc: Setup in HFSCR for POWER8")
Cc: [email protected] # v3.10+
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Tested-by: Sam Bobroff <[email protected]>
[mpe: Rewrite change log with input from Sam, add Fixes/stable]
Signed-off-by: Michael Ellerman <[email protected]>
[sb: Backported to linux-4.4.y: adjusted context]
Signed-off-by: Sam Bobroff <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/setup_64.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -211,6 +211,15 @@ static void cpu_ready_for_interrupts(voi
unsigned long lpcr = mfspr(SPRN_LPCR);
mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
}
+
+ /*
+ * Fixup HFSCR:TM based on CPU features. The bit is set by our
+ * early asm init because at that point we haven't updated our
+ * CPU features from firmware and device-tree. Here we have,
+ * so let's do it.
+ */
+ if (cpu_has_feature(CPU_FTR_HVMODE) && !cpu_has_feature(CPU_FTR_TM_COMP))
+ mtspr(SPRN_HFSCR, mfspr(SPRN_HFSCR) & ~HFSCR_TM);
}
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Koos Vriezen <[email protected]>
commit 5003ae1e735e6bfe4679d9bed6846274f322e77e upstream.
The function device_to_iommu() in the Intel VT-d driver
lacks a NULL-ptr check, resulting in this oops at boot on
some platforms:
BUG: unable to handle kernel NULL pointer dereference at 00000000000007ab
IP: [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0
PGD 0
[...]
Call Trace:
? find_or_alloc_domain.constprop.29+0x1a/0x300
? dw_dma_probe+0x561/0x580 [dw_dmac_core]
? __get_valid_domain_for_dev+0x39/0x120
? __intel_map_single+0x138/0x180
? intel_alloc_coherent+0xb6/0x120
? sst_hsw_dsp_init+0x173/0x420 [snd_soc_sst_haswell_pcm]
? mutex_lock+0x9/0x30
? kernfs_add_one+0xdb/0x130
? devres_add+0x19/0x60
? hsw_pcm_dev_probe+0x46/0xd0 [snd_soc_sst_haswell_pcm]
? platform_drv_probe+0x30/0x90
? driver_probe_device+0x1ed/0x2b0
? __driver_attach+0x8f/0xa0
? driver_probe_device+0x2b0/0x2b0
? bus_for_each_dev+0x55/0x90
? bus_add_driver+0x110/0x210
? 0xffffffffa11ea000
? driver_register+0x52/0xc0
? 0xffffffffa11ea000
? do_one_initcall+0x32/0x130
? free_vmap_area_noflush+0x37/0x70
? kmem_cache_alloc+0x88/0xd0
? do_init_module+0x51/0x1c4
? load_module+0x1ee9/0x2430
? show_taint+0x20/0x20
? kernel_read_file+0xfd/0x190
? SyS_finit_module+0xa3/0xb0
? do_syscall_64+0x4a/0xb0
? entry_SYSCALL64_slow_path+0x25/0x25
Code: 78 ff ff ff 4d 85 c0 74 ee 49 8b 5a 10 0f b6 9b e0 00 00 00 41 38 98 e0 00 00 00 77 da 0f b6 eb 49 39 a8 88 00 00 00 72 ce eb 8f <41> f6 82 ab 07 00 00 04 0f 85 76 ff ff ff 0f b6 4d 08 88 0e 49
RIP [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0
RSP <ffffc90001457a78>
CR2: 00000000000007ab
---[ end trace 16f974b6d58d0aad ]---
Add the missing pointer check.
Fixes: 1c387188c60f53b338c20eee32db055dfe022a9b ("iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions")
Signed-off-by: Koos Vriezen <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/intel-iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -719,7 +719,7 @@ static struct intel_iommu *device_to_iom
* which we used for the IOMMU lookup. Strictly speaking
* we could do this for all PCI devices; we only need to
* get the BDF# from the scope table for ACPI matches. */
- if (pdev->is_virtfn)
+ if (pdev && pdev->is_virtfn)
goto got_pdev;
*bus = drhd->devices[i].bus;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 4ce362711d78a4999011add3115b8f4b0bc25e8c upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Note that the dereference happens in the cmd and wait_init_done
callbacks which are called during probe.
Fixes: 1ba47da52712 ("uwb: add the i1480 DFU driver")
Cc: Inaky Perez-Gonzalez <[email protected]>
Cc: David Vrabel <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/uwb/i1480/dfu/usb.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/uwb/i1480/dfu/usb.c
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -362,6 +362,9 @@ int i1480_usb_probe(struct usb_interface
result);
}
+ if (iface->cur_altsetting->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
result = -ENOMEM;
i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL);
if (i1480_usb == NULL) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Engl <[email protected]>
commit e83bb3e6f3efa21f4a9d883a25d0ecd9dfb431e1 upstream.
The tiadc_irq_h(int irq, void *private) function is handling FIFO
overruns by clearing flags, disabling and enabling the ADC to
recover.
If the ADC is running in continuous mode a FIFO overrun happens
regularly. If the disabling of the ADC happens concurrently with
a new conversion. It might happen that the enabling of the ADC
is ignored by the hardware. This stops the ADC permanently. No
more interrupts are triggered.
According to the AM335x Reference Manual (SPRUH73H October 2011 -
Revised April 2013 - Chapter 12.4 and 12.5) it is necessary to
check the ADC FSM bits in REG_ADCFSM before enabling the ADC
again. Because the disabling of the ADC is done right after the
current conversion has been finished.
To trigger this bug it is necessary to run the ADC in continuous
mode. The ADC values of all channels need to be read in an endless
loop. The bug appears within the first 6 hours (~5.4 million
handled FIFO overruns). The user space application will hang on
reading new values from the character device.
Fixes: ca9a563805f7a ("iio: ti_am335x_adc: Add continuous sampling
support")
Signed-off-by: Michael Engl <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ti_am335x_adc.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -122,7 +122,9 @@ static irqreturn_t tiadc_irq_h(int irq,
{
struct iio_dev *indio_dev = private;
struct tiadc_device *adc_dev = iio_priv(indio_dev);
- unsigned int status, config;
+ unsigned int status, config, adc_fsm;
+ unsigned short count = 0;
+
status = tiadc_readl(adc_dev, REG_IRQSTATUS);
/*
@@ -136,6 +138,15 @@ static irqreturn_t tiadc_irq_h(int irq,
tiadc_writel(adc_dev, REG_CTRL, config);
tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
| IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
+
+ /* wait for idle state.
+ * ADC needs to finish the current conversion
+ * before disabling the module
+ */
+ do {
+ adc_fsm = tiadc_readl(adc_dev, REG_ADCFSM);
+ } while (adc_fsm != 0x10 && count++ < 100);
+
tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB));
return IRQ_HANDLED;
} else if (status & IRQENB_FIFO1THRES) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit e2ebfb2142acefecc2496e71360f50d25726040b upstream.
Disabling interrupts for even a millisecond can cause problems for some
devices. That can happen when sdhci changes clock frequency because it
waits for the clock to become stable under a spin lock.
The spin lock is not necessary here. Anything that is racing with changes
to the I/O state is already broken. The mmc core already provides
synchronization via "claiming" the host.
Although the spin lock probably should be removed from the code paths that
lead to this point, such a patch would touch too much code to be suitable
for stable trees. Consequently, for this patch, just drop the spin lock
while waiting.
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Tested-by: Ludovic Desroches <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1232,7 +1232,9 @@ clock_set:
return;
}
timeout--;
- mdelay(1);
+ spin_unlock_irq(&host->lock);
+ usleep_range(900, 1100);
+ spin_lock_irq(&host->lock);
}
clk |= SDHCI_CLOCK_CARD_EN;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 687e0687f71ec00e0132a21fef802dee88c2f1ad upstream.
USBTMC devices are required to have a bulk-in and a bulk-out endpoint,
but the driver failed to verify this, something which could lead to the
endpoint addresses being taken from uninitialised memory.
Make sure to zero all private data as part of allocation, and add the
missing endpoint sanity check.
Note that this also addresses a more recently introduced issue, where
the interrupt-in-presence flag would also be uninitialised whenever the
optional interrupt-in endpoint is not present. This in turn could lead
to an interrupt urb being allocated, initialised and submitted based on
uninitialised values.
Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Fixes: 5b775f672cc9 ("USB: add USB test and measurement class driver")
Signed-off-by: Johan Hovold <[email protected]>
[ johan: backport to v4.4 ]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/usbtmc.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -1164,6 +1164,12 @@ static int usbtmc_probe(struct usb_inter
}
}
+ if (!data->bulk_out || !data->bulk_in) {
+ dev_err(&intf->dev, "bulk endpoints not found\n");
+ retcode = -ENODEV;
+ goto err_put;
+ }
+
retcode = get_capabilities(data);
if (retcode)
dev_err(&intf->dev, "can't read capabilities\n");
@@ -1187,6 +1193,7 @@ static int usbtmc_probe(struct usb_inter
error_register:
sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp);
sysfs_remove_group(&intf->dev.kobj, &data_attr_grp);
+err_put:
kref_put(&data->kref, usbtmc_delete);
return retcode;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit c64c0b3cac4c5b8cb093727d2c19743ea3965c0b upstream.
Alexander reported a KMSAN splat caused by reads of uninitialized
field (tb_id_in) from user provided struct fib_result_nl
It turns out nl_fib_input() sanity tests on user input is a bit
wrong :
User can pretend nlh->nlmsg_len is big enough, but provide
at sendmsg() time a too small buffer.
Reported-by: Alexander Potapenko <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_frontend.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -961,7 +961,8 @@ static void nl_fib_input(struct sk_buff
net = sock_net(skb->sk);
nlh = nlmsg_hdr(skb);
- if (skb->len < NLMSG_HDRLEN || skb->len < nlh->nlmsg_len ||
+ if (skb->len < nlmsg_total_size(sizeof(*frn)) ||
+ skb->len < nlh->nlmsg_len ||
nlmsg_len(nlh) < sizeof(*frn))
return;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit daf229b15907fbfdb6ee183aac8ca428cb57e361 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Note that the dereference happens in the start callback which is called
during probe.
Fixes: de520b8bd552 ("uwb: add HWA radio controller driver")
Cc: Inaky Perez-Gonzalez <[email protected]>
Cc: David Vrabel <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/uwb/hwa-rc.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/uwb/hwa-rc.c
+++ b/drivers/uwb/hwa-rc.c
@@ -825,6 +825,9 @@ static int hwarc_probe(struct usb_interf
struct hwarc *hwarc;
struct device *dev = &iface->dev;
+ if (iface->cur_altsetting->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
result = -ENOMEM;
uwb_rc = uwb_rc_alloc();
if (uwb_rc == NULL) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit 15bb7745e94a665caf42bfaabf0ce062845b533b upstream.
icsk_ack.lrcvtime has a 0 value at socket creation time.
tcpi_last_data_recv can have bogus value if no payload is ever received.
This patch initializes icsk_ack.lrcvtime for active sessions
in tcp_finish_connect(), and for passive sessions in
tcp_create_openreq_child()
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_input.c | 2 +-
net/ipv4/tcp_minisocks.c | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5293,6 +5293,7 @@ void tcp_finish_connect(struct sock *sk,
struct inet_connection_sock *icsk = inet_csk(sk);
tcp_set_state(sk, TCP_ESTABLISHED);
+ icsk->icsk_ack.lrcvtime = tcp_time_stamp;
if (skb != NULL) {
icsk->icsk_af_ops->sk_rx_dst_set(sk, skb);
@@ -5496,7 +5497,6 @@ static int tcp_rcv_synsent_state_process
* to stand against the temptation 8) --ANK
*/
inet_csk_schedule_ack(sk);
- icsk->icsk_ack.lrcvtime = tcp_time_stamp;
tcp_enter_quickack_mode(sk);
inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
TCP_DELACK_MAX, TCP_RTO_MAX);
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -432,6 +432,7 @@ struct sock *tcp_create_openreq_child(st
newtp->srtt_us = 0;
newtp->mdev_us = jiffies_to_usecs(TCP_TIMEOUT_INIT);
newicsk->icsk_rto = TCP_TIMEOUT_INIT;
+ newicsk->icsk_ack.lrcvtime = tcp_time_stamp;
newtp->packets_out = 0;
newtp->retrans_out = 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit 22a0e18eac7a9e986fec76c60fa4a2926d1291e2 upstream.
I mistakenly added the code to release sk->sk_frag in
sk_common_release() instead of sk_destruct()
TCP sockets using sk->sk_allocation == GFP_ATOMIC do no call
sk_common_release() at close time, thus leaking one (order-3) page.
iSCSI is using such sockets.
Fixes: 5640f7685831 ("net: use a per task frag allocator")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/sock.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1420,6 +1420,11 @@ static void __sk_free(struct sock *sk)
pr_debug("%s: optmem leakage (%d bytes) detected\n",
__func__, atomic_read(&sk->sk_omem_alloc));
+ if (sk->sk_frag.page) {
+ put_page(sk->sk_frag.page);
+ sk->sk_frag.page = NULL;
+ }
+
if (sk->sk_peer_cred)
put_cred(sk->sk_peer_cred);
put_pid(sk->sk_peer_pid);
@@ -2598,11 +2603,6 @@ void sk_common_release(struct sock *sk)
sk_refcnt_debug_release(sk);
- if (sk->sk_frag.page) {
- put_page(sk->sk_frag.page);
- sk->sk_frag.page = NULL;
- }
-
sock_put(sk);
}
EXPORT_SYMBOL(sk_common_release);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Ulanov <[email protected]>
commit 7df9c24625b9981779afb8fcdbe2bb4765e61147 upstream.
Dmitry has reported that a BUG_ON() condition in unix_notinflight()
may be triggered by a simple code that forwards unix socket in an
SCM_RIGHTS message.
That is caused by incorrect unix socket GC implementation in unix_gc().
The GC first collects list of candidates, then (a) decrements their
"children's" inflight counter, (b) checks which inflight counters are
now 0, and then (c) increments all inflight counters back.
(a) and (c) are done by calling scan_children() with inc_inflight or
dec_inflight as the second argument.
Commit 6209344f5a37 ("net: unix: fix inflight counting bug in garbage
collector") changed scan_children() such that it no longer considers
sockets that do not have UNIX_GC_CANDIDATE flag. It also added a block
of code that that unsets this flag _before_ invoking
scan_children(, dec_iflight, ). This may lead to incorrect inflight
counters for some sockets.
This change fixes this bug by changing order of operations:
UNIX_GC_CANDIDATE is now unset only after all inflight counters are
restored to the original state.
kernel BUG at net/unix/garbage.c:149!
RIP: 0010:[<ffffffff8717ebf4>] [<ffffffff8717ebf4>]
unix_notinflight+0x3b4/0x490 net/unix/garbage.c:149
Call Trace:
[<ffffffff8716cfbf>] unix_detach_fds.isra.19+0xff/0x170 net/unix/af_unix.c:1487
[<ffffffff8716f6a9>] unix_destruct_scm+0xf9/0x210 net/unix/af_unix.c:1496
[<ffffffff86a90a01>] skb_release_head_state+0x101/0x200 net/core/skbuff.c:655
[<ffffffff86a9808a>] skb_release_all+0x1a/0x60 net/core/skbuff.c:668
[<ffffffff86a980ea>] __kfree_skb+0x1a/0x30 net/core/skbuff.c:684
[<ffffffff86a98284>] kfree_skb+0x184/0x570 net/core/skbuff.c:705
[<ffffffff871789d5>] unix_release_sock+0x5b5/0xbd0 net/unix/af_unix.c:559
[<ffffffff87179039>] unix_release+0x49/0x90 net/unix/af_unix.c:836
[<ffffffff86a694b2>] sock_release+0x92/0x1f0 net/socket.c:570
[<ffffffff86a6962b>] sock_close+0x1b/0x20 net/socket.c:1017
[<ffffffff81a76b8e>] __fput+0x34e/0x910 fs/file_table.c:208
[<ffffffff81a771da>] ____fput+0x1a/0x20 fs/file_table.c:244
[<ffffffff81483ab0>] task_work_run+0x1a0/0x280 kernel/task_work.c:116
[< inline >] exit_task_work include/linux/task_work.h:21
[<ffffffff8141287a>] do_exit+0x183a/0x2640 kernel/exit.c:828
[<ffffffff8141383e>] do_group_exit+0x14e/0x420 kernel/exit.c:931
[<ffffffff814429d3>] get_signal+0x663/0x1880 kernel/signal.c:2307
[<ffffffff81239b45>] do_signal+0xc5/0x2190 arch/x86/kernel/signal.c:807
[<ffffffff8100666a>] exit_to_usermode_loop+0x1ea/0x2d0
arch/x86/entry/common.c:156
[< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190
[<ffffffff81009693>] syscall_return_slowpath+0x4d3/0x570
arch/x86/entry/common.c:259
[<ffffffff881478e6>] entry_SYSCALL_64_fastpath+0xc4/0xc6
Link: https://lkml.org/lkml/2017/3/6/252
Signed-off-by: Andrey Ulanov <[email protected]>
Reported-by: Dmitry Vyukov <[email protected]>
Fixes: 6209344 ("net: unix: fix inflight counting bug in garbage collector")
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/unix/garbage.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -152,6 +152,7 @@ void unix_notinflight(struct file *fp)
if (s) {
struct unix_sock *u = unix_sk(s);
+ BUG_ON(!atomic_long_read(&u->inflight));
BUG_ON(list_empty(&u->link));
if (atomic_long_dec_and_test(&u->inflight))
list_del_init(&u->link);
@@ -358,6 +359,14 @@ void unix_gc(void)
}
list_del(&cursor);
+ /* Now gc_candidates contains only garbage. Restore original
+ * inflight counters for these as well, and remove the skbuffs
+ * which are creating the cycle(s).
+ */
+ skb_queue_head_init(&hitlist);
+ list_for_each_entry(u, &gc_candidates, link)
+ scan_children(&u->sk, inc_inflight, &hitlist);
+
/*
* not_cycle_list contains those sockets which do not make up a
* cycle. Restore these to the inflight list.
@@ -368,15 +377,6 @@ void unix_gc(void)
list_move_tail(&u->link, &gc_inflight_list);
}
- /*
- * Now gc_candidates contains only garbage. Restore original
- * inflight counters for these as well, and remove the skbuffs
- * which are creating the cycle(s).
- */
- skb_queue_head_init(&hitlist);
- list_for_each_entry(u, &gc_candidates, link)
- scan_children(&u->sk, inc_inflight, &hitlist);
-
spin_unlock(&unix_gc_lock);
/* Here we are. Hitlist is filled. Die. */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
commit 95aa915c2f04c27bb3935c8b9446435f40f17f9d upstream.
In sk_clone_lock(), we create a new socket and inherit most of the
parent's members via sock_copy() which memcpy()'s various sections.
Now, in case the parent socket had a BPF socket filter attached,
then newsk->sk_filter points to the same instance as the original
sk->sk_filter.
sk_filter_charge() is then called on the newsk->sk_filter to take a
reference and should that fail due to hitting max optmem, we bail
out and release the newsk instance.
The issue is that commit 278571baca2a ("net: filter: simplify socket
charging") wrongly combined the dismantle path with the failure path
of xfrm_sk_clone_policy(). This means, even when charging failed, we
call sk_free_unlock_clone() on the newsk, which then still points to
the same sk_filter as the original sk.
Thus, sk_free_unlock_clone() calls into __sk_destruct() eventually
where it tests for present sk_filter and calls sk_filter_uncharge()
on it, which potentially lets sk_omem_alloc wrap around and releases
the eBPF prog and sk_filter structure from the (still intact) parent.
Fix it by making sure that when sk_filter_charge() failed, we reset
newsk->sk_filter back to NULL before passing to sk_free_unlock_clone(),
so that we don't mess with the parents sk_filter.
Only if xfrm_sk_clone_policy() fails, we did reach the point where
either the parent's filter was NULL and as a result newsk's as well
or where we previously had a successful sk_filter_charge(), thus for
that case, we do need sk_filter_uncharge() to release the prior taken
reference on sk_filter.
Fixes: 278571baca2a ("net: filter: simplify socket charging")
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/sock.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1529,6 +1529,12 @@ struct sock *sk_clone_lock(const struct
is_charged = sk_filter_charge(newsk, filter);
if (unlikely(!is_charged || xfrm_sk_clone_policy(newsk))) {
+ /* We need to make sure that we don't uncharge the new
+ * socket if we couldn't charge it in the first place
+ * as otherwise we uncharge the parent's filter.
+ */
+ if (!is_charged)
+ RCU_INIT_POINTER(newsk->sk_filter, NULL);
/* It is still raw copy of parent, so invalidate
* destructor and make plain sk_free() */
newsk->sk_destruct = NULL;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <[email protected]>
commit 5371bbf4b295eea334ed453efa286afa2c3ccff3 upstream.
Suspending the PHY would be putting it in a low power state where it
may no longer allow us to do Wake-on-LAN.
Fixes: cc013fb48898 ("net: bcmgenet: correctly suspend and resume PHY device")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2695,7 +2695,8 @@ static int bcmgenet_suspend(struct devic
bcmgenet_netif_stop(dev);
- phy_suspend(priv->phydev);
+ if (!device_may_wakeup(d))
+ phy_suspend(priv->phydev);
netif_device_detach(dev);
@@ -2784,7 +2785,8 @@ static int bcmgenet_resume(struct device
netif_device_attach(dev);
- phy_resume(priv->phydev);
+ if (!device_may_wakeup(d))
+ phy_resume(priv->phydev);
bcmgenet_netif_start(dev);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vitaly Kuznetsov <[email protected]>
commit 77c0c9735bc0ba5898e637a3a20d6bcb50e3f67d upstream.
When we iterate through all HA regions in handle_pg_range() we have an
assumption that all these regions are sorted in the list and the
'start_pfn >= has->end_pfn' check is enough to find the proper region.
Unfortunately it's not the case with WS2016 where host can hot-add regions
in a different order. We end up modifying the wrong HA region and crashing
later on pages online. Modify the check to make sure we found the region
we were searching for while iterating. Fix the same check in pfn_covered()
as well.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hv/hv_balloon.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -673,7 +673,7 @@ static bool pfn_covered(unsigned long st
* If the pfn range we are dealing with is not in the current
* "hot add block", move on.
*/
- if ((start_pfn >= has->end_pfn))
+ if (start_pfn < has->start_pfn || start_pfn >= has->end_pfn)
continue;
/*
* If the current hot add-request extends beyond
@@ -728,7 +728,7 @@ static unsigned long handle_pg_range(uns
* If the pfn range we are dealing with is not in the current
* "hot add block", move on.
*/
- if ((start_pfn >= has->end_pfn))
+ if (start_pfn < has->start_pfn || start_pfn >= has->end_pfn)
continue;
old_covered_state = has->covered_end_pfn;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 2d7d54002e396c180db0c800c1046f0a3c471597 upstream.
When a new event is queued while processing to resize the FIFO in
snd_seq_fifo_clear(), it may lead to a use-after-free, as the old pool
that is being queued gets removed. For avoiding this race, we need to
close the pool to be deleted and sync its usage before actually
deleting it.
The issue was spotted by syzkaller.
Reported-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/seq/seq_fifo.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/sound/core/seq/seq_fifo.c
+++ b/sound/core/seq/seq_fifo.c
@@ -262,6 +262,10 @@ int snd_seq_fifo_resize(struct snd_seq_f
/* NOTE: overflow flag is not cleared */
spin_unlock_irqrestore(&f->lock, flags);
+ /* close the old pool and wait until all users are gone */
+ snd_seq_pool_mark_closing(oldpool);
+ snd_use_lock_sync(&f->use_lock);
+
/* release cells in old pool */
for (cell = oldhead; cell; cell = next) {
next = cell->next;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
commit 97ee351b50a49717543533cfb85b4bf9d88c9680 upstream.
Recent toolchains force the TOC to be 256 byte aligned. We need to
enforce this alignment in the zImage linker script, otherwise pointers
to our TOC variables (__toc_start) could be incorrect. If the actual
start of the TOC and __toc_start don't have the same value we crash
early in the zImage wrapper.
Suggested-by: Alan Modra <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/boot/zImage.lds.S | 1 +
1 file changed, 1 insertion(+)
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -68,6 +68,7 @@ SECTIONS
}
#ifdef CONFIG_PPC64_BOOT_WRAPPER
+ . = ALIGN(256);
.got :
{
__toc_start = .;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit e7cc4865f0f31698ef2f7aac01a50e78968985b7 upstream.
While hunting for clues to a use-after-free, Oleg spotted that
perf_event_init_context() can loose an error value with the result
that fork() can succeed even though we did not fully inherit the perf
event context.
Spotted-by: Oleg Nesterov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Fixes: 889ff0150661 ("perf/core: Split context's event group list into pinned and non-pinned lists")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/events/core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -8058,7 +8058,7 @@ static int perf_event_init_context(struc
ret = inherit_task_group(event, parent, parent_ctx,
child, ctxn, &inherited_all);
if (ret)
- break;
+ goto out_unlock;
}
/*
@@ -8074,7 +8074,7 @@ static int perf_event_init_context(struc
ret = inherit_task_group(event, parent, parent_ctx,
child, ctxn, &inherited_all);
if (ret)
- break;
+ goto out_unlock;
}
raw_spin_lock_irqsave(&parent_ctx->lock, flags);
@@ -8102,6 +8102,7 @@ static int perf_event_init_context(struc
}
raw_spin_unlock_irqrestore(&parent_ctx->lock, flags);
+out_unlock:
mutex_unlock(&parent_ctx->mutex);
perf_unpin_context(parent_ctx);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frederic Barrat <[email protected]>
commit 88b1bf7268f56887ca88eb09c6fb0f4fc970121a upstream.
Commit 4c6d9acce1f4 ("powerpc/mm: Add hooks for cxl") converted local
TLB invalidates to global if the cxl driver is active. This is necessary
because the CAPP snoops invalidations to forward them to the PSL on the
cxl adapter. However one path was forgotten. native_flush_hash_range()
still does local TLB invalidates, as found out the hard way recently.
This patch fixes it by following the same logic as previously: if the
cxl driver is active, the local TLB invalidates are 'upgraded' to
global.
Fixes: 4c6d9acce1f4 ("powerpc/mm: Add hooks for cxl")
Signed-off-by: Frederic Barrat <[email protected]>
Reviewed-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/hash_native_64.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -633,6 +633,10 @@ static void native_flush_hash_range(unsi
unsigned long psize = batch->psize;
int ssize = batch->ssize;
int i;
+ unsigned int use_local;
+
+ use_local = local && mmu_has_feature(MMU_FTR_TLBIEL) &&
+ mmu_psize_defs[psize].tlbiel && !cxl_ctx_in_use();
local_irq_save(flags);
@@ -659,8 +663,7 @@ static void native_flush_hash_range(unsi
} pte_iterate_hashed_end();
}
- if (mmu_has_feature(MMU_FTR_TLBIEL) &&
- mmu_psize_defs[psize].tlbiel && local) {
+ if (use_local) {
asm volatile("ptesync":::"memory");
for (i = 0; i < number; i++) {
vpn = batch->vpn[i];
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Huth <[email protected]>
commit 708e75a3ee750dce1072134e630d66c4e6eaf63c upstream.
If kvmppc_handle_exit_pr() calls kvmppc_emulate_instruction() to emulate
one instruction (in the BOOK3S_INTERRUPT_H_EMUL_ASSIST case), it calls
kvmppc_core_queue_program() afterwards if kvmppc_emulate_instruction()
returned EMULATE_FAIL, so the guest gets an program interrupt for the
illegal opcode.
However, the kvmppc_emulate_instruction() also tried to inject a
program exception for this already, so the program interrupt gets
injected twice and the return address in srr0 gets destroyed.
All other callers of kvmppc_emulate_instruction() are also injecting
a program interrupt, and since the callers have the right knowledge
about the srr1 flags that should be used, it is the function
kvmppc_emulate_instruction() that should _not_ inject program
interrupts, so remove the kvmppc_core_queue_program() here.
This fixes the issue discovered by Laurent Vivier with kvm-unit-tests
where the logs are filled with these messages when the test tries
to execute an illegal instruction:
Couldn't emulate instruction 0x00000000 (op 0 xop 0)
kvmppc_handle_exit_pr: emulation at 700 failed (00000000)
Signed-off-by: Thomas Huth <[email protected]>
Reviewed-by: Alexander Graf <[email protected]>
Tested-by: Laurent Vivier <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kvm/emulate.c | 1 -
1 file changed, 1 deletion(-)
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -302,7 +302,6 @@ int kvmppc_emulate_instruction(struct kv
advance = 0;
printk(KERN_ERR "Couldn't emulate instruction 0x%08x "
"(op %d xop %d)\n", inst, get_op(inst), get_xop(inst));
- kvmppc_core_queue_program(vcpu, 0);
}
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shaohua Li <[email protected]>
commit 61eb2b43b99ebdc9bc6bc83d9792257b243e7cb3 upstream.
Neil Brown pointed out a potential deadlock in raid 10 code with
bio_split/chain. The raid1 code could have the same issue, but recent
barrier rework makes it less likely to happen. The deadlock happens in
below sequence:
1. generic_make_request(bio), this will set current->bio_list
2. raid10_make_request will split bio to bio1 and bio2
3. __make_request(bio1), wait_barrer, add underlayer disk bio to
current->bio_list
4. __make_request(bio2), wait_barrer
If raise_barrier happens between 3 & 4, since wait_barrier runs at 3,
raise_barrier waits for IO completion from 3. And since raise_barrier
sets barrier, 4 waits for raise_barrier. But IO from 3 can't be
dispatched because raid10_make_request() doesn't finished yet.
The solution is to adjust the IO ordering. Quotes from Neil:
"
It is much safer to:
if (need to split) {
split = bio_split(bio, ...)
bio_chain(...)
make_request_fn(split);
generic_make_request(bio);
} else
make_request_fn(mddev, bio);
This way we first process the initial section of the bio (in 'split')
which will queue some requests to the underlying devices. These
requests will be queued in generic_make_request.
Then we queue the remainder of the bio, which will be added to the end
of the generic_make_request queue.
Then we return.
generic_make_request() will pop the lower-level device requests off the
queue and handle them first. Then it will process the remainder
of the original bio once the first section has been fully processed.
"
Note, this only happens in read path. In write path, the bio is flushed to
underlaying disks either by blk flush (from schedule) or offladed to raid1/10d.
It's queued in current->bio_list.
Cc: Coly Li <[email protected]>
Suggested-by: NeilBrown <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid10.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1578,7 +1578,25 @@ static void make_request(struct mddev *m
split = bio;
}
+ /*
+ * If a bio is splitted, the first part of bio will pass
+ * barrier but the bio is queued in current->bio_list (see
+ * generic_make_request). If there is a raise_barrier() called
+ * here, the second part of bio can't pass barrier. But since
+ * the first part bio isn't dispatched to underlaying disks
+ * yet, the barrier is never released, hence raise_barrier will
+ * alays wait. We have a deadlock.
+ * Note, this only happens in read path. For write path, the
+ * first part of bio is dispatched in a schedule() call
+ * (because of blk plug) or offloaded to raid10d.
+ * Quitting from the function immediately can change the bio
+ * order queued in bio_list and avoid the deadlock.
+ */
__make_request(mddev, split);
+ if (split != bio && bio_data_dir(bio) == READ) {
+ generic_make_request(bio);
+ break;
+ }
} while (split != bio);
/* In case raid10d snuck in to freeze_array */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Hildenbrand <[email protected]>
commit 90db10434b163e46da413d34db8d0e77404cc645 upstream.
No caller currently checks the return value of
kvm_io_bus_unregister_dev(). This is evil, as all callers silently go on
freeing their device. A stale reference will remain in the io_bus,
getting at least used again, when the iobus gets teared down on
kvm_destroy_vm() - leading to use after free errors.
There is nothing the callers could do, except retrying over and over
again.
So let's simply remove the bus altogether, print an error and make
sure no one can access this broken bus again (returning -ENOMEM on any
attempt to access it).
Fixes: e93f8a0f821e ("KVM: convert io_bus to SRCU")
Reported-by: Dmitry Vyukov <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: David Hildenbrand <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kvm_host.h | 4 ++--
virt/kvm/eventfd.c | 3 ++-
virt/kvm/kvm_main.c | 40 +++++++++++++++++++++++-----------------
3 files changed, 27 insertions(+), 20 deletions(-)
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -177,8 +177,8 @@ int kvm_io_bus_read(struct kvm *kvm, enu
void *val);
int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
int len, struct kvm_io_device *dev);
-int kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
- struct kvm_io_device *dev);
+void kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
+ struct kvm_io_device *dev);
#ifdef CONFIG_KVM_ASYNC_PF
struct kvm_async_pf {
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -866,7 +866,8 @@ kvm_deassign_ioeventfd_idx(struct kvm *k
continue;
kvm_io_bus_unregister_dev(kvm, bus_idx, &p->dev);
- kvm->buses[bus_idx]->ioeventfd_count--;
+ if (kvm->buses[bus_idx])
+ kvm->buses[bus_idx]->ioeventfd_count--;
ioeventfd_release(p);
ret = 0;
break;
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -615,7 +615,8 @@ static void kvm_destroy_vm(struct kvm *k
spin_unlock(&kvm_lock);
kvm_free_irq_routing(kvm);
for (i = 0; i < KVM_NR_BUSES; i++) {
- kvm_io_bus_destroy(kvm->buses[i]);
+ if (kvm->buses[i])
+ kvm_io_bus_destroy(kvm->buses[i]);
kvm->buses[i] = NULL;
}
kvm_coalesced_mmio_free(kvm);
@@ -2980,6 +2981,8 @@ int kvm_io_bus_write(struct kvm *kvm, en
};
bus = srcu_dereference(kvm->buses[bus_idx], &kvm->srcu);
+ if (!bus)
+ return -ENOMEM;
r = __kvm_io_bus_write(bus, &range, val);
return r < 0 ? r : 0;
}
@@ -2997,6 +3000,8 @@ int kvm_io_bus_write_cookie(struct kvm *
};
bus = srcu_dereference(kvm->buses[bus_idx], &kvm->srcu);
+ if (!bus)
+ return -ENOMEM;
/* First try the device referenced by cookie. */
if ((cookie >= 0) && (cookie < bus->dev_count) &&
@@ -3047,6 +3052,8 @@ int kvm_io_bus_read(struct kvm *kvm, enu
};
bus = srcu_dereference(kvm->buses[bus_idx], &kvm->srcu);
+ if (!bus)
+ return -ENOMEM;
r = __kvm_io_bus_read(bus, &range, val);
return r < 0 ? r : 0;
}
@@ -3059,6 +3066,9 @@ int kvm_io_bus_register_dev(struct kvm *
struct kvm_io_bus *new_bus, *bus;
bus = kvm->buses[bus_idx];
+ if (!bus)
+ return -ENOMEM;
+
/* exclude ioeventfd which is limited by maximum fd */
if (bus->dev_count - bus->ioeventfd_count > NR_IOBUS_DEVS - 1)
return -ENOSPC;
@@ -3078,45 +3088,41 @@ int kvm_io_bus_register_dev(struct kvm *
}
/* Caller must hold slots_lock. */
-int kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
- struct kvm_io_device *dev)
+void kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
+ struct kvm_io_device *dev)
{
- int i, r;
+ int i;
struct kvm_io_bus *new_bus, *bus;
bus = kvm->buses[bus_idx];
-
- /*
- * It's possible the bus being released before hand. If so,
- * we're done here.
- */
if (!bus)
- return 0;
+ return;
- r = -ENOENT;
for (i = 0; i < bus->dev_count; i++)
if (bus->range[i].dev == dev) {
- r = 0;
break;
}
- if (r)
- return r;
+ if (i == bus->dev_count)
+ return;
new_bus = kzalloc(sizeof(*bus) + ((bus->dev_count - 1) *
sizeof(struct kvm_io_range)), GFP_KERNEL);
- if (!new_bus)
- return -ENOMEM;
+ if (!new_bus) {
+ pr_err("kvm: failed to shrink bus, removing it completely\n");
+ goto broken;
+ }
memcpy(new_bus, bus, sizeof(*bus) + i * sizeof(struct kvm_io_range));
new_bus->dev_count--;
memcpy(new_bus->range + i, bus->range + i + 1,
(new_bus->dev_count - i) * sizeof(struct kvm_io_range));
+broken:
rcu_assign_pointer(kvm->buses[bus_idx], new_bus);
synchronize_srcu_expedited(&kvm->srcu);
kfree(bus);
- return r;
+ return;
}
static struct notifier_block kvm_cpu_notifier = {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roman Mashak <[email protected]>
commit edb9d1bff4bbe19b8ae0e71b1f38732591a9eeb2 upstream.
When tc actions are loaded as a module and no actions have been installed,
flushing them would result in actions removed from the memory, but modules
reference count not being decremented, so that the modules would not be
unloaded.
Following is example with GACT action:
% sudo modprobe act_gact
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions ls action gact
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 1
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 2
% sudo rmmod act_gact
rmmod: ERROR: Module act_gact is in use
....
After the fix:
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions add action pass index 1
% sudo tc actions add action pass index 2
% sudo tc actions add action pass index 3
% lsmod
Module Size Used by
act_gact 16384 3
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 0
% sudo rmmod act_gact
% lsmod
Module Size Used by
%
Fixes: f97017cdefef ("net-sched: Fix actions flushing")
Signed-off-by: Roman Mashak <[email protected]>
Signed-off-by: Jamal Hadi Salim <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_api.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -801,10 +801,8 @@ static int tca_action_flush(struct net *
goto out_module_put;
err = a.ops->walk(skb, &dcb, RTM_DELACTION, &a);
- if (err < 0)
+ if (err <= 0)
goto out_module_put;
- if (err == 0)
- goto noflush_out;
nla_nest_end(skb, nest);
@@ -821,7 +819,6 @@ static int tca_action_flush(struct net *
out_module_put:
module_put(a.ops->owner);
err_out:
-noflush_out:
kfree_skb(skb);
return err;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Omar Sandoval <[email protected]>
commit c4baad50297d84bde1a7ad45e50c73adae4a2192 upstream.
put_chars() stuffs the buffer it gets into an sg, but that buffer may be
on the stack. This breaks with CONFIG_VMAP_STACK=y (for me, it
manifested as printks getting turned into NUL bytes).
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Amit Shah <[email protected]>
Cc: Ben Hutchings <[email protected]>
Cc: Brad Spengler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/virtio_console.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1129,6 +1129,8 @@ static int put_chars(u32 vtermno, const
{
struct port *port;
struct scatterlist sg[1];
+ void *data;
+ int ret;
if (unlikely(early_put_chars))
return early_put_chars(vtermno, buf, count);
@@ -1137,8 +1139,14 @@ static int put_chars(u32 vtermno, const
if (!port)
return -EPIPE;
- sg_init_one(sg, buf, count);
- return __send_to_port(port, sg, 1, count, (void *)buf, false);
+ data = kmemdup(buf, count, GFP_ATOMIC);
+ if (!data)
+ return -ENOMEM;
+
+ sg_init_one(sg, data, count);
+ ret = __send_to_port(port, sg, 1, count, data, false);
+ kfree(data);
+ return ret;
}
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit 7926aff5c57b577ab0f43364ff0c59d968f6a414 upstream.
Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Brad Spengler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/rtl8150.c | 34 +++++++++++++++++++++++++++-------
1 file changed, 27 insertions(+), 7 deletions(-)
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -155,16 +155,36 @@ static const char driver_name [] = "rtl8
*/
static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
{
- return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
- RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
- indx, 0, data, size, 500);
+ void *buf;
+ int ret;
+
+ buf = kmalloc(size, GFP_NOIO);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+ RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
+ indx, 0, buf, size, 500);
+ if (ret > 0 && ret <= size)
+ memcpy(data, buf, ret);
+ kfree(buf);
+ return ret;
}
-static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
+static int set_registers(rtl8150_t * dev, u16 indx, u16 size, const void *data)
{
- return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
- RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
- indx, 0, data, size, 500);
+ void *buf;
+ int ret;
+
+ buf = kmemdup(data, size, GFP_NOIO);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+ RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
+ indx, 0, buf, size, 500);
+ kfree(buf);
+ return ret;
}
static void async_set_reg_cb(struct urb *urb)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit a4866aa812518ed1a37d8ea0c881dc946409de94 upstream.
Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is
disallowed. However, on x86, the first 1MB was always allowed for BIOS
and similar things, regardless of it actually being System RAM. It was
possible for heap to end up getting allocated in low 1MB RAM, and then
read by things like x86info or dd, which would trip hardened usercopy:
usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes)
This changes the x86 exception for the low 1MB by reading back zeros for
System RAM areas instead of blindly allowing them. More work is needed to
extend this to mmap, but currently mmap doesn't go through usercopy, so
hardened usercopy won't Oops the kernel.
Reported-by: Tommi Rantala <[email protected]>
Tested-by: Tommi Rantala <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Cc: Brad Spengler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/init.c | 40 +++++++++++++++++++------
drivers/char/mem.c | 82 +++++++++++++++++++++++++++++++++--------------------
2 files changed, 82 insertions(+), 40 deletions(-)
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -581,20 +581,40 @@ void __init init_mem_mapping(void)
* is valid. The argument is a physical page number.
*
*
- * On x86, access has to be given to the first megabyte of ram because that area
- * contains bios code and data regions used by X and dosemu and similar apps.
- * Access has to be given to non-kernel-ram areas as well, these contain the PCI
- * mmio resources as well as potential bios/acpi data regions.
+ * On x86, access has to be given to the first megabyte of RAM because that
+ * area traditionally contains BIOS code and data regions used by X, dosemu,
+ * and similar apps. Since they map the entire memory range, the whole range
+ * must be allowed (for mapping), but any areas that would otherwise be
+ * disallowed are flagged as being "zero filled" instead of rejected.
+ * Access has to be given to non-kernel-ram areas as well, these contain the
+ * PCI mmio resources as well as potential bios/acpi data regions.
*/
int devmem_is_allowed(unsigned long pagenr)
{
- if (pagenr < 256)
- return 1;
- if (iomem_is_exclusive(pagenr << PAGE_SHIFT))
+ if (page_is_ram(pagenr)) {
+ /*
+ * For disallowed memory regions in the low 1MB range,
+ * request that the page be shown as all zeros.
+ */
+ if (pagenr < 256)
+ return 2;
+
return 0;
- if (!page_is_ram(pagenr))
- return 1;
- return 0;
+ }
+
+ /*
+ * This must follow RAM test, since System RAM is considered a
+ * restricted resource under CONFIG_STRICT_IOMEM.
+ */
+ if (iomem_is_exclusive(pagenr << PAGE_SHIFT)) {
+ /* Low 1MB bypasses iomem restrictions. */
+ if (pagenr < 256)
+ return 1;
+
+ return 0;
+ }
+
+ return 1;
}
void free_init_pages(char *what, unsigned long begin, unsigned long end)
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -59,6 +59,10 @@ static inline int valid_mmap_phys_addr_r
#endif
#ifdef CONFIG_STRICT_DEVMEM
+static inline int page_is_allowed(unsigned long pfn)
+{
+ return devmem_is_allowed(pfn);
+}
static inline int range_is_allowed(unsigned long pfn, unsigned long size)
{
u64 from = ((u64)pfn) << PAGE_SHIFT;
@@ -78,6 +82,10 @@ static inline int range_is_allowed(unsig
return 1;
}
#else
+static inline int page_is_allowed(unsigned long pfn)
+{
+ return 1;
+}
static inline int range_is_allowed(unsigned long pfn, unsigned long size)
{
return 1;
@@ -122,23 +130,31 @@ static ssize_t read_mem(struct file *fil
while (count > 0) {
unsigned long remaining;
+ int allowed;
sz = size_inside_page(p, count);
- if (!range_is_allowed(p >> PAGE_SHIFT, count))
+ allowed = page_is_allowed(p >> PAGE_SHIFT);
+ if (!allowed)
return -EPERM;
+ if (allowed == 2) {
+ /* Show zeros for restricted memory. */
+ remaining = clear_user(buf, sz);
+ } else {
+ /*
+ * On ia64 if a page has been mapped somewhere as
+ * uncached, then it must also be accessed uncached
+ * by the kernel or data corruption may occur.
+ */
+ ptr = xlate_dev_mem_ptr(p);
+ if (!ptr)
+ return -EFAULT;
- /*
- * On ia64 if a page has been mapped somewhere as uncached, then
- * it must also be accessed uncached by the kernel or data
- * corruption may occur.
- */
- ptr = xlate_dev_mem_ptr(p);
- if (!ptr)
- return -EFAULT;
+ remaining = copy_to_user(buf, ptr, sz);
+
+ unxlate_dev_mem_ptr(p, ptr);
+ }
- remaining = copy_to_user(buf, ptr, sz);
- unxlate_dev_mem_ptr(p, ptr);
if (remaining)
return -EFAULT;
@@ -181,30 +197,36 @@ static ssize_t write_mem(struct file *fi
#endif
while (count > 0) {
+ int allowed;
+
sz = size_inside_page(p, count);
- if (!range_is_allowed(p >> PAGE_SHIFT, sz))
+ allowed = page_is_allowed(p >> PAGE_SHIFT);
+ if (!allowed)
return -EPERM;
- /*
- * On ia64 if a page has been mapped somewhere as uncached, then
- * it must also be accessed uncached by the kernel or data
- * corruption may occur.
- */
- ptr = xlate_dev_mem_ptr(p);
- if (!ptr) {
- if (written)
- break;
- return -EFAULT;
- }
+ /* Skip actual writing when a page is marked as restricted. */
+ if (allowed == 1) {
+ /*
+ * On ia64 if a page has been mapped somewhere as
+ * uncached, then it must also be accessed uncached
+ * by the kernel or data corruption may occur.
+ */
+ ptr = xlate_dev_mem_ptr(p);
+ if (!ptr) {
+ if (written)
+ break;
+ return -EFAULT;
+ }
- copied = copy_from_user(ptr, buf, sz);
- unxlate_dev_mem_ptr(p, ptr);
- if (copied) {
- written += sz - copied;
- if (written)
- break;
- return -EFAULT;
+ copied = copy_from_user(ptr, buf, sz);
+ unxlate_dev_mem_ptr(p, ptr);
+ if (copied) {
+ written += sz - copied;
+ if (written)
+ break;
+ return -EFAULT;
+ }
}
buf += sz;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit ef0579b64e93188710d48667cb5e014926af9f1b upstream.
The ahash API modifies the request's callback function in order
to clean up after itself in some corner cases (unaligned final
and missing finup).
When the request is complete ahash will restore the original
callback and everything is fine. However, when the request gets
an EBUSY on a full queue, an EINPROGRESS callback is made while
the request is still ongoing.
In this case the ahash API will incorrectly call its own callback.
This patch fixes the problem by creating a temporary request
object on the stack which is used to relay EINPROGRESS back to
the original completion function.
This patch also adds code to preserve the original flags value.
Fixes: ab6bf4e5e5e4 ("crypto: hash - Fix the pointer voodoo in...")
Reported-by: Sabrina Dubroca <[email protected]>
Tested-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/ahash.c | 79 +++++++++++++++++++++++++----------------
include/crypto/internal/hash.h | 10 +++++
2 files changed, 60 insertions(+), 29 deletions(-)
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -31,6 +31,7 @@ struct ahash_request_priv {
crypto_completion_t complete;
void *data;
u8 *result;
+ u32 flags;
void *ubuf[] CRYPTO_MINALIGN_ATTR;
};
@@ -269,6 +270,8 @@ static int ahash_save_req(struct ahash_r
priv->result = req->result;
priv->complete = req->base.complete;
priv->data = req->base.data;
+ priv->flags = req->base.flags;
+
/*
* WARNING: We do not backup req->priv here! The req->priv
* is for internal use of the Crypto API and the
@@ -283,38 +286,44 @@ static int ahash_save_req(struct ahash_r
return 0;
}
-static void ahash_restore_req(struct ahash_request *req)
+static void ahash_restore_req(struct ahash_request *req, int err)
{
struct ahash_request_priv *priv = req->priv;
+ if (!err)
+ memcpy(priv->result, req->result,
+ crypto_ahash_digestsize(crypto_ahash_reqtfm(req)));
+
/* Restore the original crypto request. */
req->result = priv->result;
- req->base.complete = priv->complete;
- req->base.data = priv->data;
+
+ ahash_request_set_callback(req, priv->flags,
+ priv->complete, priv->data);
req->priv = NULL;
/* Free the req->priv.priv from the ADJUSTED request. */
kzfree(priv);
}
-static void ahash_op_unaligned_finish(struct ahash_request *req, int err)
+static void ahash_notify_einprogress(struct ahash_request *req)
{
struct ahash_request_priv *priv = req->priv;
+ struct crypto_async_request oreq;
- if (err == -EINPROGRESS)
- return;
-
- if (!err)
- memcpy(priv->result, req->result,
- crypto_ahash_digestsize(crypto_ahash_reqtfm(req)));
+ oreq.data = priv->data;
- ahash_restore_req(req);
+ priv->complete(&oreq, -EINPROGRESS);
}
static void ahash_op_unaligned_done(struct crypto_async_request *req, int err)
{
struct ahash_request *areq = req->data;
+ if (err == -EINPROGRESS) {
+ ahash_notify_einprogress(areq);
+ return;
+ }
+
/*
* Restore the original request, see ahash_op_unaligned() for what
* goes where.
@@ -325,7 +334,7 @@ static void ahash_op_unaligned_done(stru
*/
/* First copy req->result into req->priv.result */
- ahash_op_unaligned_finish(areq, err);
+ ahash_restore_req(areq, err);
/* Complete the ORIGINAL request. */
areq->base.complete(&areq->base, err);
@@ -341,7 +350,12 @@ static int ahash_op_unaligned(struct aha
return err;
err = op(req);
- ahash_op_unaligned_finish(req, err);
+ if (err == -EINPROGRESS ||
+ (err == -EBUSY && (ahash_request_flags(req) &
+ CRYPTO_TFM_REQ_MAY_BACKLOG)))
+ return err;
+
+ ahash_restore_req(req, err);
return err;
}
@@ -376,25 +390,14 @@ int crypto_ahash_digest(struct ahash_req
}
EXPORT_SYMBOL_GPL(crypto_ahash_digest);
-static void ahash_def_finup_finish2(struct ahash_request *req, int err)
+static void ahash_def_finup_done2(struct crypto_async_request *req, int err)
{
- struct ahash_request_priv *priv = req->priv;
+ struct ahash_request *areq = req->data;
if (err == -EINPROGRESS)
return;
- if (!err)
- memcpy(priv->result, req->result,
- crypto_ahash_digestsize(crypto_ahash_reqtfm(req)));
-
- ahash_restore_req(req);
-}
-
-static void ahash_def_finup_done2(struct crypto_async_request *req, int err)
-{
- struct ahash_request *areq = req->data;
-
- ahash_def_finup_finish2(areq, err);
+ ahash_restore_req(areq, err);
areq->base.complete(&areq->base, err);
}
@@ -405,11 +408,15 @@ static int ahash_def_finup_finish1(struc
goto out;
req->base.complete = ahash_def_finup_done2;
- req->base.flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
err = crypto_ahash_reqtfm(req)->final(req);
+ if (err == -EINPROGRESS ||
+ (err == -EBUSY && (ahash_request_flags(req) &
+ CRYPTO_TFM_REQ_MAY_BACKLOG)))
+ return err;
out:
- ahash_def_finup_finish2(req, err);
+ ahash_restore_req(req, err);
return err;
}
@@ -417,7 +424,16 @@ static void ahash_def_finup_done1(struct
{
struct ahash_request *areq = req->data;
+ if (err == -EINPROGRESS) {
+ ahash_notify_einprogress(areq);
+ return;
+ }
+
+ areq->base.flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
err = ahash_def_finup_finish1(areq, err);
+ if (areq->priv)
+ return;
areq->base.complete(&areq->base, err);
}
@@ -432,6 +448,11 @@ static int ahash_def_finup(struct ahash_
return err;
err = tfm->update(req);
+ if (err == -EINPROGRESS ||
+ (err == -EBUSY && (ahash_request_flags(req) &
+ CRYPTO_TFM_REQ_MAY_BACKLOG)))
+ return err;
+
return ahash_def_finup_finish1(req, err);
}
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -173,6 +173,16 @@ static inline struct ahash_instance *aha
return crypto_alloc_instance2(name, alg, ahash_instance_headroom());
}
+static inline void ahash_request_complete(struct ahash_request *req, int err)
+{
+ req->base.complete(&req->base, err);
+}
+
+static inline u32 ahash_request_flags(struct ahash_request *req)
+{
+ return req->base.flags;
+}
+
static inline struct crypto_ahash *crypto_spawn_ahash(
struct crypto_ahash_spawn *spawn)
{
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 005145378c9ad7575a01b6ce1ba118fb427f583a upstream.
I ran into a stack frame size warning because of the on-stack copy of
the USB device structure:
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_disconnect':
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:1029:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Copying a device structure like this is wrong for a number of other reasons
too aside from the possible stack overflow. One of them is that the
dev_info() call will print the name of the device later, but AFAICT
we have only copied a pointer to the name earlier and the actual name
has been freed by the time it gets printed.
This removes the on-stack copy of the device and instead copies the
device name using kstrdup(). I'm ignoring the possible failure here
as both printk() and kfree() are able to deal with NULL pointers.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
@@ -952,8 +952,9 @@ EXPORT_SYMBOL(dvb_usbv2_probe);
void dvb_usbv2_disconnect(struct usb_interface *intf)
{
struct dvb_usb_device *d = usb_get_intfdata(intf);
- const char *name = d->name;
- struct device dev = d->udev->dev;
+ const char *devname = kstrdup(dev_name(&d->udev->dev), GFP_KERNEL);
+ const char *drvname = d->name;
+
dev_dbg(&d->udev->dev, "%s: bInterfaceNumber=%d\n", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
@@ -962,8 +963,9 @@ void dvb_usbv2_disconnect(struct usb_int
dvb_usbv2_exit(d);
- dev_info(&dev, "%s: '%s' successfully deinitialized and disconnected\n",
- KBUILD_MODNAME, name);
+ pr_info("%s: '%s:%s' successfully deinitialized and disconnected\n",
+ KBUILD_MODNAME, drvname, devname);
+ kfree(devname);
}
EXPORT_SYMBOL(dvb_usbv2_disconnect);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Genoud <[email protected]>
commit 31ca2c63fdc0aee725cbd4f207c1256f5deaabde upstream.
If uart_flush_buffer() is called between atmel_tx_dma() and
atmel_complete_tx_dma(), the circular buffer has been cleared, but not
atmel_port->tx_len.
That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
atmel_port->tx_len) bytes).
Tested-by: Nicolas Ferre <[email protected]>
Signed-off-by: Richard Genoud <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1867,6 +1867,11 @@ static void atmel_flush_buffer(struct ua
UART_PUT_TCR(port, 0);
atmel_port->pdc_tx.ofs = 0;
}
+ /*
+ * in uart_flush_buffer(), the xmit circular buffer has just
+ * been cleared, so we have to reset tx_len accordingly.
+ */
+ atmel_port->tx_len = 0;
}
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anton Blanchard <[email protected]>
commit 85e8a23936ab3442de0c42da97d53b29f004ece1 upstream.
We see lpfc devices regularly fail during kexec. Fix this by adding a
shutdown method which mirrors the remove method.
Signed-off-by: Anton Blanchard <[email protected]>
Reviewed-by: Mauricio Faria de Oliveira <[email protected]>
Tested-by: Mauricio Faria de Oliveira <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/lpfc/lpfc_init.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -11249,6 +11249,7 @@ static struct pci_driver lpfc_driver = {
.id_table = lpfc_id_table,
.probe = lpfc_pci_probe_one,
.remove = lpfc_pci_remove_one,
+ .shutdown = lpfc_pci_remove_one,
.suspend = lpfc_pci_suspend_one,
.resume = lpfc_pci_resume_one,
.err_handler = &lpfc_err_handler,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Garry <[email protected]>
commit 9702c67c6066f583b629cf037d2056245bb7a8e6 upstream.
The total ata xfer length may not be calculated properly, in that we do
not use the proper method to get an sg element dma length.
According to the code comment, sg_dma_len() should be used after
dma_map_sg() is called.
This issue was found by turning on the SMMUv3 in front of the hisi_sas
controller in hip07. Multiple sg elements were being combined into a
single element, but the original first element length was being use as
the total xfer length.
Fixes: ff2aeb1eb64c8a4770a6 ("libata: convert to chained sg")
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libsas/sas_ata.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -219,7 +219,7 @@ static unsigned int sas_ata_qc_issue(str
task->num_scatter = qc->n_elem;
} else {
for_each_sg(qc->sg, sg, qc->n_elem, si)
- xfer += sg->length;
+ xfer += sg_dma_len(sg);
task->total_xfer_len = xfer;
task->num_scatter = si;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Leech <[email protected]>
commit 6f8830f5bbab16e54f261de187f3df4644a5b977 upstream.
There's a rather long standing regression from the commit "libiscsi:
Reduce locking contention in fast path"
Depending on iSCSI target behavior, it's possible to hit the case in
iscsi_complete_task where the task is still on a pending list
(!list_empty(&task->running)). When that happens the task is removed
from the list while holding the session back_lock, but other task list
modification occur under the frwd_lock. That leads to linked list
corruption and eventually a panicked system.
Rather than back out the session lock split entirely, in order to try
and keep some of the performance gains this patch adds another lock to
maintain the task lists integrity.
Major enterprise supported kernels have been backing out the lock split
for while now, thanks to the efforts at IBM where a lab setup has the
most reliable reproducer I've seen on this issue. This patch has been
tested there successfully.
Signed-off-by: Chris Leech <[email protected]>
Fixes: 659743b02c41 ("[SCSI] libiscsi: Reduce locking contention in fast path")
Reported-by: Prashantha Subbarao <[email protected]>
Reviewed-by: Guilherme G. Piccoli <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libiscsi.c | 26 +++++++++++++++++++++++++-
include/scsi/libiscsi.h | 1 +
2 files changed, 26 insertions(+), 1 deletion(-)
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -560,8 +560,12 @@ static void iscsi_complete_task(struct i
WARN_ON_ONCE(task->state == ISCSI_TASK_FREE);
task->state = state;
- if (!list_empty(&task->running))
+ spin_lock_bh(&conn->taskqueuelock);
+ if (!list_empty(&task->running)) {
+ pr_debug_once("%s while task on list", __func__);
list_del_init(&task->running);
+ }
+ spin_unlock_bh(&conn->taskqueuelock);
if (conn->task == task)
conn->task = NULL;
@@ -783,7 +787,9 @@ __iscsi_conn_send_pdu(struct iscsi_conn
if (session->tt->xmit_task(task))
goto free_task;
} else {
+ spin_lock_bh(&conn->taskqueuelock);
list_add_tail(&task->running, &conn->mgmtqueue);
+ spin_unlock_bh(&conn->taskqueuelock);
iscsi_conn_queue_work(conn);
}
@@ -1474,8 +1480,10 @@ void iscsi_requeue_task(struct iscsi_tas
* this may be on the requeue list already if the xmit_task callout
* is handling the r2ts while we are adding new ones
*/
+ spin_lock_bh(&conn->taskqueuelock);
if (list_empty(&task->running))
list_add_tail(&task->running, &conn->requeue);
+ spin_unlock_bh(&conn->taskqueuelock);
iscsi_conn_queue_work(conn);
}
EXPORT_SYMBOL_GPL(iscsi_requeue_task);
@@ -1512,22 +1520,26 @@ static int iscsi_data_xmit(struct iscsi_
* only have one nop-out as a ping from us and targets should not
* overflow us with nop-ins
*/
+ spin_lock_bh(&conn->taskqueuelock);
check_mgmt:
while (!list_empty(&conn->mgmtqueue)) {
conn->task = list_entry(conn->mgmtqueue.next,
struct iscsi_task, running);
list_del_init(&conn->task->running);
+ spin_unlock_bh(&conn->taskqueuelock);
if (iscsi_prep_mgmt_task(conn, conn->task)) {
/* regular RX path uses back_lock */
spin_lock_bh(&conn->session->back_lock);
__iscsi_put_task(conn->task);
spin_unlock_bh(&conn->session->back_lock);
conn->task = NULL;
+ spin_lock_bh(&conn->taskqueuelock);
continue;
}
rc = iscsi_xmit_task(conn);
if (rc)
goto done;
+ spin_lock_bh(&conn->taskqueuelock);
}
/* process pending command queue */
@@ -1535,19 +1547,24 @@ check_mgmt:
conn->task = list_entry(conn->cmdqueue.next, struct iscsi_task,
running);
list_del_init(&conn->task->running);
+ spin_unlock_bh(&conn->taskqueuelock);
if (conn->session->state == ISCSI_STATE_LOGGING_OUT) {
fail_scsi_task(conn->task, DID_IMM_RETRY);
+ spin_lock_bh(&conn->taskqueuelock);
continue;
}
rc = iscsi_prep_scsi_cmd_pdu(conn->task);
if (rc) {
if (rc == -ENOMEM || rc == -EACCES) {
+ spin_lock_bh(&conn->taskqueuelock);
list_add_tail(&conn->task->running,
&conn->cmdqueue);
conn->task = NULL;
+ spin_unlock_bh(&conn->taskqueuelock);
goto done;
} else
fail_scsi_task(conn->task, DID_ABORT);
+ spin_lock_bh(&conn->taskqueuelock);
continue;
}
rc = iscsi_xmit_task(conn);
@@ -1558,6 +1575,7 @@ check_mgmt:
* we need to check the mgmt queue for nops that need to
* be sent to aviod starvation
*/
+ spin_lock_bh(&conn->taskqueuelock);
if (!list_empty(&conn->mgmtqueue))
goto check_mgmt;
}
@@ -1577,12 +1595,15 @@ check_mgmt:
conn->task = task;
list_del_init(&conn->task->running);
conn->task->state = ISCSI_TASK_RUNNING;
+ spin_unlock_bh(&conn->taskqueuelock);
rc = iscsi_xmit_task(conn);
if (rc)
goto done;
+ spin_lock_bh(&conn->taskqueuelock);
if (!list_empty(&conn->mgmtqueue))
goto check_mgmt;
}
+ spin_unlock_bh(&conn->taskqueuelock);
spin_unlock_bh(&conn->session->frwd_lock);
return -ENODATA;
@@ -1738,7 +1759,9 @@ int iscsi_queuecommand(struct Scsi_Host
goto prepd_reject;
}
} else {
+ spin_lock_bh(&conn->taskqueuelock);
list_add_tail(&task->running, &conn->cmdqueue);
+ spin_unlock_bh(&conn->taskqueuelock);
iscsi_conn_queue_work(conn);
}
@@ -2917,6 +2940,7 @@ iscsi_conn_setup(struct iscsi_cls_sessio
INIT_LIST_HEAD(&conn->mgmtqueue);
INIT_LIST_HEAD(&conn->cmdqueue);
INIT_LIST_HEAD(&conn->requeue);
+ spin_lock_init(&conn->taskqueuelock);
INIT_WORK(&conn->xmitwork, iscsi_xmitworker);
/* allocate login_task used for the login/text sequences */
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -196,6 +196,7 @@ struct iscsi_conn {
struct iscsi_task *task; /* xmit task in progress */
/* xmit */
+ spinlock_t taskqueuelock; /* protects the next three lists */
struct list_head mgmtqueue; /* mgmt (control) xmit queue */
struct list_head cmdqueue; /* data-path cmd queue */
struct list_head requeue; /* tasks needing another run */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin K. Petersen <[email protected]>
commit a00a7862513089f17209b732f230922f1942e0b9 upstream.
Kefeng Wang discovered that old versions of the QEMU CD driver would
return mangled mode data causing us to walk off the end of the buffer in
an attempt to parse it. Sanity check the returned mode sense data.
Reported-by: Kefeng Wang <[email protected]>
Tested-by: Kefeng Wang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sr.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -839,6 +839,7 @@ static void get_capabilities(struct scsi
unsigned char *buffer;
struct scsi_mode_data data;
struct scsi_sense_hdr sshdr;
+ unsigned int ms_len = 128;
int rc, n;
static const char *loadmech[] =
@@ -865,10 +866,11 @@ static void get_capabilities(struct scsi
scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr);
/* ask for mode page 0x2a */
- rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, 128,
+ rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, ms_len,
SR_TIMEOUT, 3, &data, NULL);
- if (!scsi_status_is_good(rc)) {
+ if (!scsi_status_is_good(rc) || data.length > ms_len ||
+ data.header_length + data.block_descriptor_length > data.length) {
/* failed, drive doesn't have capabilities mode page */
cd->cdi.speed = 1;
cd->cdi.mask |= (CDC_CD_R | CDC_CD_RW | CDC_DVD_R |
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit a04e54f2c35823ca32d56afcd5cea5b783e2f51a upstream.
The following fixes a divide by zero OOPs with TYPE_TAPE
due to pscsi_tape_read_blocksize() failing causing a zero
sd->sector_size being propigated up via dev_attrib.hw_block_size.
It also fixes another long-standing bug where TYPE_TAPE and
TYPE_MEDIMUM_CHANGER where using pscsi_create_type_other(),
which does not call scsi_device_get() to take the device
reference. Instead, rename pscsi_create_type_rom() to
pscsi_create_type_nondisk() and use it for all cases.
Finally, also drop a dump_stack() in pscsi_get_blocks() for
non TYPE_DISK, which in modern target-core can get invoked
via target_sense_desc_format() during CHECK_CONDITION.
Reported-by: Malcolm Haak <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_pscsi.c | 47 +++++++++----------------------------
1 file changed, 12 insertions(+), 35 deletions(-)
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -157,7 +157,7 @@ static void pscsi_tape_read_blocksize(st
buf = kzalloc(12, GFP_KERNEL);
if (!buf)
- return;
+ goto out_free;
memset(cdb, 0, MAX_COMMAND_SIZE);
cdb[0] = MODE_SENSE;
@@ -172,9 +172,10 @@ static void pscsi_tape_read_blocksize(st
* If MODE_SENSE still returns zero, set the default value to 1024.
*/
sdev->sector_size = (buf[9] << 16) | (buf[10] << 8) | (buf[11]);
+out_free:
if (!sdev->sector_size)
sdev->sector_size = 1024;
-out_free:
+
kfree(buf);
}
@@ -317,9 +318,10 @@ static int pscsi_add_device_to_list(stru
sd->lun, sd->queue_depth);
}
- dev->dev_attrib.hw_block_size = sd->sector_size;
+ dev->dev_attrib.hw_block_size =
+ min_not_zero((int)sd->sector_size, 512);
dev->dev_attrib.hw_max_sectors =
- min_t(int, sd->host->max_sectors, queue_max_hw_sectors(q));
+ min_not_zero(sd->host->max_sectors, queue_max_hw_sectors(q));
dev->dev_attrib.hw_queue_depth = sd->queue_depth;
/*
@@ -342,8 +344,10 @@ static int pscsi_add_device_to_list(stru
/*
* For TYPE_TAPE, attempt to determine blocksize with MODE_SENSE.
*/
- if (sd->type == TYPE_TAPE)
+ if (sd->type == TYPE_TAPE) {
pscsi_tape_read_blocksize(dev, sd);
+ dev->dev_attrib.hw_block_size = sd->sector_size;
+ }
return 0;
}
@@ -409,7 +413,7 @@ static int pscsi_create_type_disk(struct
/*
* Called with struct Scsi_Host->host_lock called.
*/
-static int pscsi_create_type_rom(struct se_device *dev, struct scsi_device *sd)
+static int pscsi_create_type_nondisk(struct se_device *dev, struct scsi_device *sd)
__releases(sh->host_lock)
{
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
@@ -436,28 +440,6 @@ static int pscsi_create_type_rom(struct
return 0;
}
-/*
- * Called with struct Scsi_Host->host_lock called.
- */
-static int pscsi_create_type_other(struct se_device *dev,
- struct scsi_device *sd)
- __releases(sh->host_lock)
-{
- struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
- struct Scsi_Host *sh = sd->host;
- int ret;
-
- spin_unlock_irq(sh->host_lock);
- ret = pscsi_add_device_to_list(dev, sd);
- if (ret)
- return ret;
-
- pr_debug("CORE_PSCSI[%d] - Added Type: %s for %d:%d:%d:%llu\n",
- phv->phv_host_id, scsi_device_type(sd->type), sh->host_no,
- sd->channel, sd->id, sd->lun);
- return 0;
-}
-
static int pscsi_configure_device(struct se_device *dev)
{
struct se_hba *hba = dev->se_hba;
@@ -545,11 +527,8 @@ static int pscsi_configure_device(struct
case TYPE_DISK:
ret = pscsi_create_type_disk(dev, sd);
break;
- case TYPE_ROM:
- ret = pscsi_create_type_rom(dev, sd);
- break;
default:
- ret = pscsi_create_type_other(dev, sd);
+ ret = pscsi_create_type_nondisk(dev, sd);
break;
}
@@ -606,8 +585,7 @@ static void pscsi_free_device(struct se_
else if (pdv->pdv_lld_host)
scsi_host_put(pdv->pdv_lld_host);
- if ((sd->type == TYPE_DISK) || (sd->type == TYPE_ROM))
- scsi_device_put(sd);
+ scsi_device_put(sd);
pdv->pdv_sd = NULL;
}
@@ -1133,7 +1111,6 @@ static sector_t pscsi_get_blocks(struct
if (pdv->pdv_bd && pdv->pdv_bd->bd_part)
return pdv->pdv_bd->bd_part->nr_sects;
- dump_stack();
return 0;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin K. Petersen <[email protected]>
commit 7c856152cb92f8eee2df29ef325a1b1f43161aff upstream.
We previously made sure that the reported disk capacity was less than
0xffffffff blocks when the kernel was not compiled with large sector_t
support (CONFIG_LBDAF). However, this check assumed that the capacity
was reported in units of 512 bytes.
Add a sanity check function to ensure that we only enable disks if the
entire reported capacity can be expressed in terms of sector_t.
Reported-by: Steve Magnani <[email protected]>
Cc: Bart Van Assche <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sd.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1979,6 +1979,22 @@ static void read_capacity_error(struct s
#define READ_CAPACITY_RETRIES_ON_RESET 10
+/*
+ * Ensure that we don't overflow sector_t when CONFIG_LBDAF is not set
+ * and the reported logical block size is bigger than 512 bytes. Note
+ * that last_sector is a u64 and therefore logical_to_sectors() is not
+ * applicable.
+ */
+static bool sd_addressable_capacity(u64 lba, unsigned int sector_size)
+{
+ u64 last_sector = (lba + 1ULL) << (ilog2(sector_size) - 9);
+
+ if (sizeof(sector_t) == 4 && last_sector > U32_MAX)
+ return false;
+
+ return true;
+}
+
static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
unsigned char *buffer)
{
@@ -2044,7 +2060,7 @@ static int read_capacity_16(struct scsi_
return -ENODEV;
}
- if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) {
+ if (!sd_addressable_capacity(lba, sector_size)) {
sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
"kernel compiled with support for large block "
"devices.\n");
@@ -2130,7 +2146,7 @@ static int read_capacity_10(struct scsi_
return sector_size;
}
- if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
+ if (!sd_addressable_capacity(lba, sector_size)) {
sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
"kernel compiled with support for large block "
"devices.\n");
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit 1c99de981f30b3e7868b8d20ce5479fa1c0fea46 upstream.
Once upon a time back in 2009, a work-around was added to support
the GlobalSAN iSCSI initiator v3.3 for MacOSX, which during login
did not propose nor respond to MaxBurstLength, FirstBurstLength,
DefaultTime2Wait and DefaultTime2Retain keys.
The work-around in iscsi_check_proposer_for_optional_reply()
allowed the missing keys to be proposed, but did not require
waiting for a response before moving to full feature phase
operation. This allowed GlobalSAN v3.3 to work out-of-the
box, and for many years we didn't run into login interopt
issues with any other initiators..
Until recently, when Martin tried a QLogic 57840S iSCSI Offload
HBA on Windows 2016 which completed login, but subsequently
failed with:
Got unknown iSCSI OpCode: 0x43
The issue was QLogic MSFT side did not propose DefaultTime2Wait +
DefaultTime2Retain, so LIO proposes them itself, and immediately
transitions to full feature phase because of the GlobalSAN hack.
However, the QLogic MSFT side still attempts to respond to
DefaultTime2Retain + DefaultTime2Wait, even though LIO has set
ISCSI_FLAG_LOGIN_NEXT_STAGE3 + ISCSI_FLAG_LOGIN_TRANSIT
in last login response.
So while the QLogic MSFT side should have been proposing these
two keys to start, it was doing the correct thing per RFC-3720
attempting to respond to proposed keys before transitioning to
full feature phase.
All that said, recent versions of GlobalSAN iSCSI (v5.3.0.541)
does correctly propose the four keys during login, making the
original work-around moot.
So in order to allow QLogic MSFT to run unmodified as-is, go
ahead and drop this long standing work-around.
Reported-by: Martin Svec <[email protected]>
Cc: Martin Svec <[email protected]>
Cc: Himanshu Madhani <[email protected]>
Cc: Arun Easi <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target_parameters.c | 16 ----------------
1 file changed, 16 deletions(-)
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -804,22 +804,6 @@ static void iscsi_check_proposer_for_opt
if (!strcmp(param->name, MAXRECVDATASEGMENTLENGTH))
SET_PSTATE_REPLY_OPTIONAL(param);
/*
- * The GlobalSAN iSCSI Initiator for MacOSX does
- * not respond to MaxBurstLength, FirstBurstLength,
- * DefaultTime2Wait or DefaultTime2Retain parameter keys.
- * So, we set them to 'reply optional' here, and assume the
- * the defaults from iscsi_parameters.h if the initiator
- * is not RFC compliant and the keys are not negotiated.
- */
- if (!strcmp(param->name, MAXBURSTLENGTH))
- SET_PSTATE_REPLY_OPTIONAL(param);
- if (!strcmp(param->name, FIRSTBURSTLENGTH))
- SET_PSTATE_REPLY_OPTIONAL(param);
- if (!strcmp(param->name, DEFAULTTIME2WAIT))
- SET_PSTATE_REPLY_OPTIONAL(param);
- if (!strcmp(param->name, DEFAULTTIME2RETAIN))
- SET_PSTATE_REPLY_OPTIONAL(param);
- /*
* Required for gPXE iSCSI boot client
*/
if (!strcmp(param->name, MAXCONNECTIONS))
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Krause <[email protected]>
commit c06989da39cdb10604d572c8c7ea8c8c97f3c483 upstream.
vdso_enabled can be set to arbitrary integer values via the kernel command
line 'vdso32=' parameter or via 'sysctl abi.vsyscall32'.
load_vdso32() only maps VDSO if vdso_enabled == 1, but ARCH_DLINFO_IA32
merily checks for vdso_enabled != 0. As a consequence the AT_SYSINFO_EHDR
auxiliary vector for the VDSO_ENTRY is emitted with a NULL pointer which
causes a segfault when the application tries to use the VDSO.
Restrict the valid arguments on the command line and the sysctl to 0 and 1.
Fixes: b0b49f2673f0 ("x86, vdso: Remove compat vdso support")
Signed-off-by: Mathias Krause <[email protected]>
Acked-by: Andy Lutomirski <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Roland McGrath <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/vdso/vdso32-setup.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -31,8 +31,10 @@ static int __init vdso32_setup(char *s)
{
vdso32_enabled = simple_strtoul(s, NULL, 0);
- if (vdso32_enabled > 1)
+ if (vdso32_enabled > 1) {
pr_warn("vdso32 values other than 0 and 1 are no longer allowed; vdso disabled\n");
+ vdso32_enabled = 0;
+ }
return 1;
}
@@ -89,13 +91,18 @@ subsys_initcall(sysenter_setup);
/* Register vsyscall32 into the ABI table */
#include <linux/sysctl.h>
+static const int zero;
+static const int one = 1;
+
static struct ctl_table abi_table2[] = {
{
.procname = "vsyscall32",
.data = &vdso32_enabled,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = proc_dointvec
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = (int *)&zero,
+ .extra2 = (int *)&one,
},
{}
};
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
commit d09c5373e8e4eaaa09233552cbf75dc4c4f21203 upstream.
Commit fd2d2b191fe7 ("s390: get_user() should zero on failure")
intended to fix s390's get_user() implementation which did not zero
the target operand if the read from user space faulted. Unfortunately
the patch has no effect: the corresponding inline assembly specifies
that the operand is only written to ("=") and the previous value is
discarded.
Therefore the compiler is free to and actually does omit the zero
initialization.
To fix this simply change the contraint modifier to "+", so the
compiler cannot omit the initialization anymore.
Fixes: c9ca78415ac1 ("s390/uaccess: provide inline variants of get_user/put_user")
Fixes: fd2d2b191fe7 ("s390: get_user() should zero on failure")
Cc: Al Viro <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/include/asm/uaccess.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -148,7 +148,7 @@ unsigned long __must_check __copy_to_use
" jg 2b\n" \
".popsection\n" \
EX_TABLE(0b,3b) EX_TABLE(1b,3b) \
- : "=d" (__rc), "=Q" (*(to)) \
+ : "=d" (__rc), "+Q" (*(to)) \
: "d" (size), "Q" (*(from)), \
"d" (__reg0), "K" (-EFAULT) \
: "cc"); \
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan-Marek Glogowski <[email protected]>
commit 806a28efe9b78ffae5e2757e1ee924b8e50c08ab upstream.
Currently the cifs module breaks the CIFS specs on reconnect as
described in http://msdn.microsoft.com/en-us/library/cc246529.aspx:
"TreeId (4 bytes): Uniquely identifies the tree connect for the
command. This MUST be 0 for the SMB2 TREE_CONNECT Request."
Signed-off-by: Jan-Marek Glogowski <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Tested-by: Aurelien Aptel <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2pdu.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -868,6 +868,10 @@ SMB2_tcon(const unsigned int xid, struct
return -EINVAL;
}
+ /* SMB2 TREE_CONNECT request must be called with TreeId == 0 */
+ if (tcon)
+ tcon->tid = 0;
+
rc = small_smb2_init(SMB2_TREE_CONNECT, tcon, (void **) &req);
if (rc) {
kfree(unc_path);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcelo Henrique Cerri <[email protected]>
commit d82c0d12c92705ef468683c9b7a8298dd61ed191 upstream.
Reorder the operations in decompress_kernel() to ensure initrd is moved
to a safe location before the bss section is zeroed.
During decompression bss can overlap with the initrd and this can
corrupt the initrd contents depending on the size of the compressed
kernel (which affects where the initrd is placed by the bootloader) and
the size of the bss section of the decompressor.
Also use the correct initrd size when checking for overlaps with
parmblock.
Fixes: 06c0dd72aea3 ([S390] fix boot failures with compressed kernels)
Reviewed-by: Joy Latten <[email protected]>
Reviewed-by: Vineetha HariPai <[email protected]>
Signed-off-by: Marcelo Henrique Cerri <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/boot/compressed/misc.c | 35 +++++++++++++++++++----------------
1 file changed, 19 insertions(+), 16 deletions(-)
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -142,31 +142,34 @@ static void check_ipl_parmblock(void *st
unsigned long decompress_kernel(void)
{
- unsigned long output_addr;
- unsigned char *output;
+ void *output, *kernel_end;
- output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
- check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
- memset(&_bss, 0, &_ebss - &_bss);
- free_mem_ptr = (unsigned long)&_end;
- free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
- output = (unsigned char *) output_addr;
+ output = (void *) ALIGN((unsigned long) &_end + HEAP_SIZE, PAGE_SIZE);
+ kernel_end = output + SZ__bss_start;
+ check_ipl_parmblock((void *) 0, (unsigned long) kernel_end);
#ifdef CONFIG_BLK_DEV_INITRD
/*
* Move the initrd right behind the end of the decompressed
- * kernel image.
+ * kernel image. This also prevents initrd corruption caused by
+ * bss clearing since kernel_end will always be located behind the
+ * current bss section..
*/
- if (INITRD_START && INITRD_SIZE &&
- INITRD_START < (unsigned long) output + SZ__bss_start) {
- check_ipl_parmblock(output + SZ__bss_start,
- INITRD_START + INITRD_SIZE);
- memmove(output + SZ__bss_start,
- (void *) INITRD_START, INITRD_SIZE);
- INITRD_START = (unsigned long) output + SZ__bss_start;
+ if (INITRD_START && INITRD_SIZE && kernel_end > (void *) INITRD_START) {
+ check_ipl_parmblock(kernel_end, INITRD_SIZE);
+ memmove(kernel_end, (void *) INITRD_START, INITRD_SIZE);
+ INITRD_START = (unsigned long) kernel_end;
}
#endif
+ /*
+ * Clear bss section. free_mem_ptr and free_mem_end_ptr need to be
+ * initialized afterwards since they reside in bss.
+ */
+ memset(&_bss, 0, &_ebss - &_bss);
+ free_mem_ptr = (unsigned long) &_end;
+ free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
puts("Uncompressing Linux... ");
decompress(input_data, input_len, NULL, NULL, output, NULL, error);
puts("Ok, booting the kernel.\n");
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Martin <[email protected]>
commit 5fe81fe98123ce41265c65e95d34418d30d005d1 upstream.
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill TXSTATUS, a well-defined default value is used, based on the
task's current value.
Suggested-by: James Hogan <[email protected]>
Signed-off-by: Dave Martin <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/metag/kernel/ptrace.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/arch/metag/kernel/ptrace.c
+++ b/arch/metag/kernel/ptrace.c
@@ -24,6 +24,16 @@
* user_regset definitions.
*/
+static unsigned long user_txstatus(const struct pt_regs *regs)
+{
+ unsigned long data = (unsigned long)regs->ctx.Flags;
+
+ if (regs->ctx.SaveMask & TBICTX_CBUF_BIT)
+ data |= USER_GP_REGS_STATUS_CATCH_BIT;
+
+ return data;
+}
+
int metag_gp_regs_copyout(const struct pt_regs *regs,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
@@ -62,9 +72,7 @@ int metag_gp_regs_copyout(const struct p
if (ret)
goto out;
/* TXSTATUS */
- data = (unsigned long)regs->ctx.Flags;
- if (regs->ctx.SaveMask & TBICTX_CBUF_BIT)
- data |= USER_GP_REGS_STATUS_CATCH_BIT;
+ data = user_txstatus(regs);
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&data, 4*25, 4*26);
if (ret)
@@ -119,6 +127,7 @@ int metag_gp_regs_copyin(struct pt_regs
if (ret)
goto out;
/* TXSTATUS */
+ data = user_txstatus(regs);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&data, 4*25, 4*26);
if (ret)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Martin <[email protected]>
commit fb411b837b587a32046dc4f369acb93a10b1def8 upstream.
gpr_set won't work correctly and can never have been tested, and the
correct behaviour is not clear due to the endianness-dependent task
layout.
So, just remove it. The core code will now return -EOPNOTSUPPORT when
trying to set NT_PRSTATUS on this architecture until/unless a correct
implementation is supplied.
Signed-off-by: Dave Martin <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/c6x/kernel/ptrace.c | 41 -----------------------------------------
1 file changed, 41 deletions(-)
--- a/arch/c6x/kernel/ptrace.c
+++ b/arch/c6x/kernel/ptrace.c
@@ -69,46 +69,6 @@ static int gpr_get(struct task_struct *t
0, sizeof(*regs));
}
-static int gpr_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
- struct pt_regs *regs = task_pt_regs(target);
-
- /* Don't copyin TSR or CSR */
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- ®s,
- 0, PT_TSR * sizeof(long));
- if (ret)
- return ret;
-
- ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- PT_TSR * sizeof(long),
- (PT_TSR + 1) * sizeof(long));
- if (ret)
- return ret;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- ®s,
- (PT_TSR + 1) * sizeof(long),
- PT_CSR * sizeof(long));
- if (ret)
- return ret;
-
- ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- PT_CSR * sizeof(long),
- (PT_CSR + 1) * sizeof(long));
- if (ret)
- return ret;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- ®s,
- (PT_CSR + 1) * sizeof(long), -1);
- return ret;
-}
-
enum c6x_regset {
REGSET_GPR,
};
@@ -120,7 +80,6 @@ static const struct user_regset c6x_regs
.size = sizeof(u32),
.align = sizeof(u32),
.get = gpr_get,
- .set = gpr_set
},
};
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cameron Gutman <[email protected]>
commit 5376366886251e2f8f248704adb620a4bc4c0937 upstream.
Signed-off-by: Cameron Gutman <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/joystick/xpad.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -186,6 +186,7 @@ static const struct xpad_device {
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
{ 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 },
@@ -308,6 +309,7 @@ static struct usb_device_id xpad_table[]
XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
XPAD_XBOX360_VENDOR(0x1532), /* Razer Sabertooth */
+ XPAD_XBOXONE_VENDOR(0x1532), /* Razer Wildcat */
XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */
{ }
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Martin <[email protected]>
commit d614fd58a2834cfe4efa472c33c8f3ce2338b09b upstream.
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/ptrace.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -444,7 +444,8 @@ static int fpr_set(struct task_struct *t
&target->thread.fpu,
0, sizeof(elf_fpregset_t));
- for (i = 0; i < NUM_FPU_REGS; i++) {
+ BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
+ for (i = 0; i < NUM_FPU_REGS && count >= sizeof(elf_fpreg_t); i++) {
err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&fpr_val, i * sizeof(elf_fpreg_t),
(i + 1) * sizeof(elf_fpreg_t));
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Qiang <[email protected]>
commit e7e11f99564222d82f0ce84bd521e57d78a6b678 upstream.
In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the
'req->mip_levels' array. This array can be assigned any value from
the user space. As both the 'num_sizes' and the array is uint32_t,
it is easy to make 'num_sizes' overflow. The later 'mip_levels' is
used as the loop count. This can lead an oob write. Add the check of
'req->mip_levels' to avoid this.
Signed-off-by: Li Qiang <[email protected]>
Reviewed-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -708,8 +708,11 @@ int vmw_surface_define_ioctl(struct drm_
128;
num_sizes = 0;
- for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
+ for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i) {
+ if (req->mip_levels[i] > DRM_VMW_MAX_MIP_LEVELS)
+ return -EINVAL;
num_sizes += req->mip_levels[i];
+ }
if (num_sizes > DRM_VMW_MAX_SURFACE_FACES * DRM_VMW_MAX_MIP_LEVELS ||
num_sizes == 0)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Murray McAllister <[email protected]>
commit 63774069d9527a1aeaa4aa20e929ef5e8e9ecc38 upstream.
In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is
used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()),
which can leak useful addresses to dmesg.
Add check to avoid a size of 0.
Signed-off-by: Murray McAllister <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -161,7 +161,7 @@ int vmw_get_cap_3d_ioctl(struct drm_devi
bool gb_objects = !!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS);
struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
- if (unlikely(arg->pad64 != 0)) {
+ if (unlikely(arg->pad64 != 0 || arg->max_size == 0)) {
DRM_ERROR("Illegal GET_3D_CAP argument.\n");
return -EINVAL;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Murray McAllister <[email protected]>
commit 36274ab8c596f1240c606bb514da329add2a1bcd upstream.
Before memory allocations vmw_surface_define_ioctl() checks the
upper-bounds of a user-supplied size, but does not check if the
supplied size is 0.
Add check to avoid NULL pointer dereferences.
Signed-off-by: Murray McAllister <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -711,8 +711,8 @@ int vmw_surface_define_ioctl(struct drm_
for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
num_sizes += req->mip_levels[i];
- if (num_sizes > DRM_VMW_MAX_SURFACE_FACES *
- DRM_VMW_MAX_MIP_LEVELS)
+ if (num_sizes > DRM_VMW_MAX_SURFACE_FACES * DRM_VMW_MAX_MIP_LEVELS ||
+ num_sizes == 0)
return -EINVAL;
size = vmw_user_surface_size + 128 +
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Hellstrom <[email protected]>
commit 53e16798b0864464c5444a204e1bb93ae246c429 upstream.
The mesa winsys sometimes uses unimplemented parameter requests to
check for features. Remove the error message to avoid bloating the
kernel log.
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Brian Paul <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -106,8 +106,6 @@ int vmw_getparam_ioctl(struct drm_device
param->value = dev_priv->max_mob_size;
break;
default:
- DRM_ERROR("Illegal vmwgfx get param request: %d\n",
- param->param);
return -EINVAL;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Bonzini <[email protected]>
commit 06ce521af9558814b8606c0476c54497cf83a653 upstream.
handle_vmon gets a reference on VMXON region page,
but does not release it. Release the reference.
Found by syzkaller; based on a patch by Dmitry.
Reported-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
[bwh: Backported to 3.16: use skip_emulated_instruction()]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6079,14 +6079,20 @@ static int nested_vmx_check_vmptr(struct
}
page = nested_get_page(vcpu, vmptr);
- if (page == NULL ||
- *(u32 *)kmap(page) != VMCS12_REVISION) {
+ if (page == NULL) {
nested_vmx_failInvalid(vcpu);
+ skip_emulated_instruction(vcpu);
+ return 1;
+ }
+ if (*(u32 *)kmap(page) != VMCS12_REVISION) {
kunmap(page);
+ nested_release_page_clean(page);
+ nested_vmx_failInvalid(vcpu);
skip_emulated_instruction(vcpu);
return 1;
}
kunmap(page);
+ nested_release_page_clean(page);
vmx->nested.vmxon_ptr = vmptr;
break;
case EXIT_REASON_VMCLEAR:
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amit Pundir <[email protected]>
This reverts commit dbcfee724255ae171af51aaa56d8c5b78342adc9 which is
commit be95485a0b8288a93402705730d3ea32f9f812b9 upstream.
Upstream commit be95485 (ARM: 8457/1: psci-smp is built only for SMP)
was intended to fix the build error for configs with CONFIG_SMP=n and
CONFIG_ARM_PSCI=y, but it end up introducing a build error when
cherry-picked on 3.18.y.
This patch resulted in redefinition of psci_init() and broke the
build for every build config in 3.18.y with CONFIG_SMP=n and
CONFIG_ARM_PSCI=y.
Signed-off-by: Amit Pundir <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/include/asm/psci.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/include/asm/psci.h
+++ b/arch/arm/include/asm/psci.h
@@ -37,7 +37,7 @@ struct psci_operations {
extern struct psci_operations psci_ops;
extern struct smp_operations psci_smp_ops;
-#if defined(CONFIG_SMP) && defined(CONFIG_ARM_PSCI)
+#ifdef CONFIG_ARM_PSCI
int psci_init(void);
bool psci_smp_available(void);
#else
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
commit 309124e2648d668a0c23539c5078815660a4a850 upstream.
According to full-history-linux commit d3794f4fa7c3edc3 ("[PATCH] M68k
update (part 25)"), port operations are allowed on m68k if CONFIG_ISA is
defined.
However, commit 153dcc54df826d2f ("[PATCH] mem driver: fix conditional
on isa i/o support") accidentally changed an "||" into an "&&",
disabling it completely on m68k. This logic was retained when
introducing the DEVPORT symbol in commit 4f911d64e04a44c4 ("Make
/dev/port conditional on config symbol").
Drop the bogus dependency on !M68K to fix this.
Fixes: 153dcc54df826d2f ("[PATCH] mem driver: fix conditional on isa i/o support")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Tested-by: Al Stone <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/Kconfig | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -575,7 +575,6 @@ config TELCLOCK
config DEVPORT
bool
- depends on !M68K
depends on ISA || PCI
default y
On 20/04/2017 08:35, Greg Kroah-Hartman wrote:
> 3.18-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Richard Genoud <[email protected]>
>
> commit 31ca2c63fdc0aee725cbd4f207c1256f5deaabde upstream.
>
> If uart_flush_buffer() is called between atmel_tx_dma() and
> atmel_complete_tx_dma(), the circular buffer has been cleared, but not
> atmel_port->tx_len.
> That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
> atmel_port->tx_len) bytes).
>
> Tested-by: Nicolas Ferre <[email protected]>
> Signed-off-by: Richard Genoud <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
>
> ---
> drivers/tty/serial/atmel_serial.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -1867,6 +1867,11 @@ static void atmel_flush_buffer(struct ua
> UART_PUT_TCR(port, 0);
> atmel_port->pdc_tx.ofs = 0;
> }
> + /*
> + * in uart_flush_buffer(), the xmit circular buffer has just
> + * been cleared, so we have to reset tx_len accordingly.
> + */
> + atmel_port->tx_len = 0;
> }
>
> /*
>
>
Hi,
This won't compile on 3.18 kernel since ->tx_len doesn't exist yet.
Here is the backported version of this patch:
Thanks !
======================
commit 31ca2c63fdc0aee725cbd4f207c1256f5deaabde upstream.
If uart_flush_buffer() is called between atmel_tx_dma() and
atmel_complete_tx_dma(), the circular buffer has been cleared, but not
its length.
That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
sg_dma_len(&atmel_port->sg_tx)) bytes).
Signed-off-by: Richard Genoud <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index daaed7c79e4f..a10c778be2ad 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1867,6 +1867,11 @@ static void atmel_flush_buffer(struct uart_port *port)
UART_PUT_TCR(port, 0);
atmel_port->pdc_tx.ofs = 0;
}
+ /*
+ * in uart_flush_buffer(), the xmit circular buffer has just
+ * been cleared, so we have to reset its length accordingly.
+ */
+ sg_dma_len(&atmel_port->sg_tx) = 0;
}
/*
On Thu, Apr 20, 2017 at 09:46:03AM +0200, Richard Genoud wrote:
> On 20/04/2017 08:35, Greg Kroah-Hartman wrote:
> > 3.18-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Richard Genoud <[email protected]>
> >
> > commit 31ca2c63fdc0aee725cbd4f207c1256f5deaabde upstream.
> >
> > If uart_flush_buffer() is called between atmel_tx_dma() and
> > atmel_complete_tx_dma(), the circular buffer has been cleared, but not
> > atmel_port->tx_len.
> > That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
> > atmel_port->tx_len) bytes).
> >
> > Tested-by: Nicolas Ferre <[email protected]>
> > Signed-off-by: Richard Genoud <[email protected]>
> > Signed-off-by: Greg Kroah-Hartman <[email protected]>
> >
> > ---
> > drivers/tty/serial/atmel_serial.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > --- a/drivers/tty/serial/atmel_serial.c
> > +++ b/drivers/tty/serial/atmel_serial.c
> > @@ -1867,6 +1867,11 @@ static void atmel_flush_buffer(struct ua
> > UART_PUT_TCR(port, 0);
> > atmel_port->pdc_tx.ofs = 0;
> > }
> > + /*
> > + * in uart_flush_buffer(), the xmit circular buffer has just
> > + * been cleared, so we have to reset tx_len accordingly.
> > + */
> > + atmel_port->tx_len = 0;
> > }
> >
> > /*
> >
> >
> Hi,
> This won't compile on 3.18 kernel since ->tx_len doesn't exist yet.
>
> Here is the backported version of this patch:
> Thanks !
> ======================
>
> commit 31ca2c63fdc0aee725cbd4f207c1256f5deaabde upstream.
>
> If uart_flush_buffer() is called between atmel_tx_dma() and
> atmel_complete_tx_dma(), the circular buffer has been cleared, but not
> its length.
> That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
> sg_dma_len(&atmel_port->sg_tx)) bytes).
>
> Signed-off-by: Richard Genoud <[email protected]>
> ---
> drivers/tty/serial/atmel_serial.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index daaed7c79e4f..a10c778be2ad 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -1867,6 +1867,11 @@ static void atmel_flush_buffer(struct uart_port *port)
> UART_PUT_TCR(port, 0);
> atmel_port->pdc_tx.ofs = 0;
> }
> + /*
> + * in uart_flush_buffer(), the xmit circular buffer has just
> + * been cleared, so we have to reset its length accordingly.
> + */
> + sg_dma_len(&atmel_port->sg_tx) = 0;
Thanks for the fix, now updated.
greg k-h
On 04/19/2017 11:34 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.50 release.
> There are 124 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr 22 06:35:33 UTC 2017.
> Anything received after that time might be too late.
>
Build results:
total: 139 pass: 133 fail: 6
Failed builds:
arm:at91_dt_defconfig
arm:sama5_defconfig
avr32:defconfig
avr32:merisc_defconfig
avr32:atngw100mkii_evklcd101_defconfig
mips:cavium_octeon_defconfig
Qemu test results:
total: 111 pass: 111 fail: 0
Build errors:
drivers/tty/serial/atmel_serial.c: In function 'atmel_flush_buffer':
drivers/tty/serial/atmel_serial.c:1874: error: 'struct atmel_uart_port' has no member named 'tx_len'
Culprit: 2ac3772fd20e ("tty/serial: atmel: fix race condition (TX+DMA)")
arch/mips/mm/tlbex.c: In function 'build_huge_handler_tail':
arch/mips/mm/tlbex.c:767:6: error: 'cpu_has_ftlb' undeclared
Culprit: 9c2c357eb4aa ("MIPS: Flush wrong invalid FTLB entry for huge page")
Details are available at http://kerneltests.org/builders.
Guenter
On Thu, Apr 20, 2017 at 06:46:11AM -0700, Guenter Roeck wrote:
> On 04/19/2017 11:34 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.50 release.
> > There are 124 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat Apr 22 06:35:33 UTC 2017.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 139 pass: 133 fail: 6
> Failed builds:
> arm:at91_dt_defconfig
> arm:sama5_defconfig
> avr32:defconfig
> avr32:merisc_defconfig
> avr32:atngw100mkii_evklcd101_defconfig
> mips:cavium_octeon_defconfig
>
> Qemu test results:
> total: 111 pass: 111 fail: 0
>
> Build errors:
>
> drivers/tty/serial/atmel_serial.c: In function 'atmel_flush_buffer':
> drivers/tty/serial/atmel_serial.c:1874: error: 'struct atmel_uart_port' has no member named 'tx_len'
>
> Culprit: 2ac3772fd20e ("tty/serial: atmel: fix race condition (TX+DMA)")
I've just fixed this one.
> arch/mips/mm/tlbex.c: In function 'build_huge_handler_tail':
> arch/mips/mm/tlbex.c:767:6: error: 'cpu_has_ftlb' undeclared
>
> Culprit: 9c2c357eb4aa ("MIPS: Flush wrong invalid FTLB entry for huge page")
Odd, let me dig into this one...
thanks,
greg k-h
On Thu, Apr 20, 2017 at 04:28:03PM +0200, Greg Kroah-Hartman wrote:
> On Thu, Apr 20, 2017 at 06:46:11AM -0700, Guenter Roeck wrote:
> > On 04/19/2017 11:34 PM, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 3.18.50 release.
> > > There are 124 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Sat Apr 22 06:35:33 UTC 2017.
> > > Anything received after that time might be too late.
> > >
> >
> > Build results:
> > total: 139 pass: 133 fail: 6
> > Failed builds:
> > arm:at91_dt_defconfig
> > arm:sama5_defconfig
> > avr32:defconfig
> > avr32:merisc_defconfig
> > avr32:atngw100mkii_evklcd101_defconfig
> > mips:cavium_octeon_defconfig
> >
> > Qemu test results:
> > total: 111 pass: 111 fail: 0
> >
> > Build errors:
> >
> > drivers/tty/serial/atmel_serial.c: In function 'atmel_flush_buffer':
> > drivers/tty/serial/atmel_serial.c:1874: error: 'struct atmel_uart_port' has no member named 'tx_len'
> >
> > Culprit: 2ac3772fd20e ("tty/serial: atmel: fix race condition (TX+DMA)")
>
> I've just fixed this one.
>
> > arch/mips/mm/tlbex.c: In function 'build_huge_handler_tail':
> > arch/mips/mm/tlbex.c:767:6: error: 'cpu_has_ftlb' undeclared
> >
> > Culprit: 9c2c357eb4aa ("MIPS: Flush wrong invalid FTLB entry for huge page")
>
> Odd, let me dig into this one...
That looks to fix an issue that showed up in 4.3, so I've dropped it
from the 3.18 stable queue now.
thanks for the report, all should be good now.
greg k-h
On 04/20/2017 12:53 PM, Greg Kroah-Hartman wrote:
> On Thu, Apr 20, 2017 at 04:28:03PM +0200, Greg Kroah-Hartman wrote:
>> On Thu, Apr 20, 2017 at 06:46:11AM -0700, Guenter Roeck wrote:
>>> On 04/19/2017 11:34 PM, Greg Kroah-Hartman wrote:
>>>> This is the start of the stable review cycle for the 3.18.50 release.
>>>> There are 124 patches in this series, all will be posted as a response
>>>> to this one. If anyone has any issues with these being applied, please
>>>> let me know.
>>>>
>>>> Responses should be made by Sat Apr 22 06:35:33 UTC 2017.
>>>> Anything received after that time might be too late.
>>>>
>>>
>>> Build results:
>>> total: 139 pass: 133 fail: 6
>>> Failed builds:
>>> arm:at91_dt_defconfig
>>> arm:sama5_defconfig
>>> avr32:defconfig
>>> avr32:merisc_defconfig
>>> avr32:atngw100mkii_evklcd101_defconfig
>>> mips:cavium_octeon_defconfig
>>>
>>> Qemu test results:
>>> total: 111 pass: 111 fail: 0
>>>
>>> Build errors:
>>>
>>> drivers/tty/serial/atmel_serial.c: In function 'atmel_flush_buffer':
>>> drivers/tty/serial/atmel_serial.c:1874: error: 'struct atmel_uart_port' has no member named 'tx_len'
>>>
>>> Culprit: 2ac3772fd20e ("tty/serial: atmel: fix race condition (TX+DMA)")
>>
>> I've just fixed this one.
>>
>>> arch/mips/mm/tlbex.c: In function 'build_huge_handler_tail':
>>> arch/mips/mm/tlbex.c:767:6: error: 'cpu_has_ftlb' undeclared
>>>
>>> Culprit: 9c2c357eb4aa ("MIPS: Flush wrong invalid FTLB entry for huge page")
>>
>> Odd, let me dig into this one...
>
> That looks to fix an issue that showed up in 4.3, so I've dropped it
> from the 3.18 stable queue now.
>
> thanks for the report, all should be good now.
>
Are you sure ?
groeck@server:~/src/linux-stable$ git grep cpu_has_ftlb
arch/mips/mm/tlbex.c: if (cpu_has_ftlb && flush) {
groeck@server:~/src/linux-stable$ git describe
v3.18.49-125-g7379419992fb
Thanks,
Guenter
On Thu, Apr 20, 2017 at 08:38:16PM -0700, Guenter Roeck wrote:
> On 04/20/2017 12:53 PM, Greg Kroah-Hartman wrote:
> > On Thu, Apr 20, 2017 at 04:28:03PM +0200, Greg Kroah-Hartman wrote:
> > > On Thu, Apr 20, 2017 at 06:46:11AM -0700, Guenter Roeck wrote:
> > > > On 04/19/2017 11:34 PM, Greg Kroah-Hartman wrote:
> > > > > This is the start of the stable review cycle for the 3.18.50 release.
> > > > > There are 124 patches in this series, all will be posted as a response
> > > > > to this one. If anyone has any issues with these being applied, please
> > > > > let me know.
> > > > >
> > > > > Responses should be made by Sat Apr 22 06:35:33 UTC 2017.
> > > > > Anything received after that time might be too late.
> > > > >
> > > >
> > > > Build results:
> > > > total: 139 pass: 133 fail: 6
> > > > Failed builds:
> > > > arm:at91_dt_defconfig
> > > > arm:sama5_defconfig
> > > > avr32:defconfig
> > > > avr32:merisc_defconfig
> > > > avr32:atngw100mkii_evklcd101_defconfig
> > > > mips:cavium_octeon_defconfig
> > > >
> > > > Qemu test results:
> > > > total: 111 pass: 111 fail: 0
> > > >
> > > > Build errors:
> > > >
> > > > drivers/tty/serial/atmel_serial.c: In function 'atmel_flush_buffer':
> > > > drivers/tty/serial/atmel_serial.c:1874: error: 'struct atmel_uart_port' has no member named 'tx_len'
> > > >
> > > > Culprit: 2ac3772fd20e ("tty/serial: atmel: fix race condition (TX+DMA)")
> > >
> > > I've just fixed this one.
> > >
> > > > arch/mips/mm/tlbex.c: In function 'build_huge_handler_tail':
> > > > arch/mips/mm/tlbex.c:767:6: error: 'cpu_has_ftlb' undeclared
> > > >
> > > > Culprit: 9c2c357eb4aa ("MIPS: Flush wrong invalid FTLB entry for huge page")
> > >
> > > Odd, let me dig into this one...
> >
> > That looks to fix an issue that showed up in 4.3, so I've dropped it
> > from the 3.18 stable queue now.
> >
> > thanks for the report, all should be good now.
> >
>
> Are you sure ?
>
> groeck@server:~/src/linux-stable$ git grep cpu_has_ftlb
> arch/mips/mm/tlbex.c: if (cpu_has_ftlb && flush) {
> groeck@server:~/src/linux-stable$ git describe
> v3.18.49-125-g7379419992fb
{sigh} it would help if I actually pushed the commit to kernel.org :(
The patch has been deleted from the stable-queue now.
thanks,
greg k-h
On Thu, Apr 20, 2017 at 01:37:56PM -0700, kernelci.org bot wrote:
> stable-rc/linux-3.18.y boot: 283 boots: 3 failed, 262 passed with 18 offline (v3.18.49-125-g7379419992fb)
Yeah, thanks for adding 3.18 back to the builds!
I'm guessing this is all ok...
thanks,
greg k-h
On Fri, Apr 21, 2017 at 09:17:51AM +0200, Greg Kroah-Hartman wrote:
> On Thu, Apr 20, 2017 at 01:37:56PM -0700, kernelci.org bot wrote:
> > stable-rc/linux-3.18.y boot: 283 boots: 3 failed, 262 passed with 18 offline (v3.18.49-125-g7379419992fb)
> Yeah, thanks for adding 3.18 back to the builds!
> I'm guessing this is all ok...
Yes, looks to be.
BTW, one thing you might find helpful in the web interface is the
regressions tab - if you go to the linked web page in the boot report
you'll see a tab marked "Regressions" which if something was detected as
having previously worked it'll be listed and you can click on the build
to get the details of the last good and first bad boots. There's an
example of this happening for mailine at:
https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.11-rc7-57-gc154165e93b7/
That won't show anything here since there's not been any recent builds
of v3.18 but will going forwards (and for other trees).
On Fri, Apr 21, 2017 at 06:35:28AM +0200, Greg Kroah-Hartman wrote:
> On Thu, Apr 20, 2017 at 08:38:16PM -0700, Guenter Roeck wrote:
> > On 04/20/2017 12:53 PM, Greg Kroah-Hartman wrote:
> > > On Thu, Apr 20, 2017 at 04:28:03PM +0200, Greg Kroah-Hartman wrote:
> > > > On Thu, Apr 20, 2017 at 06:46:11AM -0700, Guenter Roeck wrote:
> > > > > On 04/19/2017 11:34 PM, Greg Kroah-Hartman wrote:
> > > > > > This is the start of the stable review cycle for the 3.18.50 release.
> > > > > > There are 124 patches in this series, all will be posted as a response
> > > > > > to this one. If anyone has any issues with these being applied, please
> > > > > > let me know.
> > > > > >
> > > > > > Responses should be made by Sat Apr 22 06:35:33 UTC 2017.
> > > > > > Anything received after that time might be too late.
> > > > > >
> > > > >
> > > > > Build results:
> > > > > total: 139 pass: 133 fail: 6
> > > > > Failed builds:
> > > > > arm:at91_dt_defconfig
> > > > > arm:sama5_defconfig
> > > > > avr32:defconfig
> > > > > avr32:merisc_defconfig
> > > > > avr32:atngw100mkii_evklcd101_defconfig
> > > > > mips:cavium_octeon_defconfig
> > > > >
> > > > > Qemu test results:
> > > > > total: 111 pass: 111 fail: 0
> > > > >
> > > > > Build errors:
> > > > >
> > > > > drivers/tty/serial/atmel_serial.c: In function 'atmel_flush_buffer':
> > > > > drivers/tty/serial/atmel_serial.c:1874: error: 'struct atmel_uart_port' has no member named 'tx_len'
> > > > >
> > > > > Culprit: 2ac3772fd20e ("tty/serial: atmel: fix race condition (TX+DMA)")
> > > >
> > > > I've just fixed this one.
> > > >
> > > > > arch/mips/mm/tlbex.c: In function 'build_huge_handler_tail':
> > > > > arch/mips/mm/tlbex.c:767:6: error: 'cpu_has_ftlb' undeclared
> > > > >
> > > > > Culprit: 9c2c357eb4aa ("MIPS: Flush wrong invalid FTLB entry for huge page")
> > > >
> > > > Odd, let me dig into this one...
> > >
> > > That looks to fix an issue that showed up in 4.3, so I've dropped it
> > > from the 3.18 stable queue now.
> > >
> > > thanks for the report, all should be good now.
> > >
> >
> > Are you sure ?
> >
> > groeck@server:~/src/linux-stable$ git grep cpu_has_ftlb
> > arch/mips/mm/tlbex.c: if (cpu_has_ftlb && flush) {
> > groeck@server:~/src/linux-stable$ git describe
> > v3.18.49-125-g7379419992fb
>
> {sigh} it would help if I actually pushed the commit to kernel.org :(
>
> The patch has been deleted from the stable-queue now.
>
Confirmed. No more errors.
Thanks,
Guenter
On Fri, Apr 21, 2017 at 08:58:36AM -0700, Guenter Roeck wrote:
> On Fri, Apr 21, 2017 at 06:35:28AM +0200, Greg Kroah-Hartman wrote:
> > On Thu, Apr 20, 2017 at 08:38:16PM -0700, Guenter Roeck wrote:
> > > On 04/20/2017 12:53 PM, Greg Kroah-Hartman wrote:
> > > > On Thu, Apr 20, 2017 at 04:28:03PM +0200, Greg Kroah-Hartman wrote:
> > > > > On Thu, Apr 20, 2017 at 06:46:11AM -0700, Guenter Roeck wrote:
> > > > > > On 04/19/2017 11:34 PM, Greg Kroah-Hartman wrote:
> > > > > > > This is the start of the stable review cycle for the 3.18.50 release.
> > > > > > > There are 124 patches in this series, all will be posted as a response
> > > > > > > to this one. If anyone has any issues with these being applied, please
> > > > > > > let me know.
> > > > > > >
> > > > > > > Responses should be made by Sat Apr 22 06:35:33 UTC 2017.
> > > > > > > Anything received after that time might be too late.
> > > > > > >
> > > > > >
> > > > > > Build results:
> > > > > > total: 139 pass: 133 fail: 6
> > > > > > Failed builds:
> > > > > > arm:at91_dt_defconfig
> > > > > > arm:sama5_defconfig
> > > > > > avr32:defconfig
> > > > > > avr32:merisc_defconfig
> > > > > > avr32:atngw100mkii_evklcd101_defconfig
> > > > > > mips:cavium_octeon_defconfig
> > > > > >
> > > > > > Qemu test results:
> > > > > > total: 111 pass: 111 fail: 0
> > > > > >
> > > > > > Build errors:
> > > > > >
> > > > > > drivers/tty/serial/atmel_serial.c: In function 'atmel_flush_buffer':
> > > > > > drivers/tty/serial/atmel_serial.c:1874: error: 'struct atmel_uart_port' has no member named 'tx_len'
> > > > > >
> > > > > > Culprit: 2ac3772fd20e ("tty/serial: atmel: fix race condition (TX+DMA)")
> > > > >
> > > > > I've just fixed this one.
> > > > >
> > > > > > arch/mips/mm/tlbex.c: In function 'build_huge_handler_tail':
> > > > > > arch/mips/mm/tlbex.c:767:6: error: 'cpu_has_ftlb' undeclared
> > > > > >
> > > > > > Culprit: 9c2c357eb4aa ("MIPS: Flush wrong invalid FTLB entry for huge page")
> > > > >
> > > > > Odd, let me dig into this one...
> > > >
> > > > That looks to fix an issue that showed up in 4.3, so I've dropped it
> > > > from the 3.18 stable queue now.
> > > >
> > > > thanks for the report, all should be good now.
> > > >
> > >
> > > Are you sure ?
> > >
> > > groeck@server:~/src/linux-stable$ git grep cpu_has_ftlb
> > > arch/mips/mm/tlbex.c: if (cpu_has_ftlb && flush) {
> > > groeck@server:~/src/linux-stable$ git describe
> > > v3.18.49-125-g7379419992fb
> >
> > {sigh} it would help if I actually pushed the commit to kernel.org :(
> >
> > The patch has been deleted from the stable-queue now.
> >
> Confirmed. No more errors.
Wonderful, thanks for checking.
greg k-h