Despite carefully rewording the kerneldoc to describe the new direct
interaction with dma_range_map, it seems I managed to confuse myself in
removing the redundant force_aperture check and ended up making the code
not do that at all. This led to dma_range_maps inadvertently being able
to set iovad->start_pfn = 0, and all the nonsensical chaos which ensues
from there. Restore the correct behaviour of constraining base_pfn to
the domain aperture regardless of dma_range_map, and not trying to apply
dma_range_map constraints to the basic IOVA domain since they will be
properly handled with reserved regions later.
Reported-by: Jon Hunter <[email protected]>
Reported-by: Jerry Snitselaar <[email protected]>
Fixes: ad4750b07d34 ("iommu/dma: Make limit checks self-contained")
Tested-by: Jerry Snitselaar <[email protected]>
Reviewed-by: Jerry Snitselaar <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
---
Since I've now got round to rebasing on -rc1, I figured I may as well
send a v2 with updated tags to avoid any confusion.
drivers/iommu/dma-iommu.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index f731e4b2a417..43520e7275cc 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -686,15 +686,15 @@ static int iommu_dma_init_domain(struct iommu_domain *domain, struct device *dev
/* Check the domain allows at least some access to the device... */
if (map) {
- dma_addr_t base = dma_range_map_min(map);
- if (base > domain->geometry.aperture_end ||
+ if (dma_range_map_min(map) > domain->geometry.aperture_end ||
dma_range_map_max(map) < domain->geometry.aperture_start) {
pr_warn("specified DMA range outside IOMMU capability\n");
return -EFAULT;
}
- /* ...then finally give it a kicking to make sure it fits */
- base_pfn = max(base, domain->geometry.aperture_start) >> order;
}
+ /* ...then finally give it a kicking to make sure it fits */
+ base_pfn = max_t(unsigned long, base_pfn,
+ domain->geometry.aperture_start >> order);
/* start_pfn is always nonzero for an already-initialised domain */
mutex_lock(&cookie->mutex);
--
2.39.2.101.g768bb238c484.dirty
Hi Robin,
I just tested this on my Windows Dev Kit 2023 running on EL2. This works
now, thank you!
with best regards
Jens
Tested-by: Jens Glathe <[email protected]>
On 5/29/24 17:54, Robin Murphy wrote:
> Despite carefully rewording the kerneldoc to describe the new direct
> interaction with dma_range_map, it seems I managed to confuse myself in
> removing the redundant force_aperture check and ended up making the code
> not do that at all. This led to dma_range_maps inadvertently being able
> to set iovad->start_pfn = 0, and all the nonsensical chaos which ensues
> from there. Restore the correct behaviour of constraining base_pfn to
> the domain aperture regardless of dma_range_map, and not trying to apply
> dma_range_map constraints to the basic IOVA domain since they will be
> properly handled with reserved regions later.
>
> Reported-by: Jon Hunter <[email protected]>
> Reported-by: Jerry Snitselaar <[email protected]>
> Fixes: ad4750b07d34 ("iommu/dma: Make limit checks self-contained")
> Tested-by: Jerry Snitselaar <[email protected]>
> Reviewed-by: Jerry Snitselaar <[email protected]>
> Signed-off-by: Robin Murphy <[email protected]>
> ---
>
> Since I've now got round to rebasing on -rc1, I figured I may as well
> send a v2 with updated tags to avoid any confusion.
>
> drivers/iommu/dma-iommu.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
> index f731e4b2a417..43520e7275cc 100644
> --- a/drivers/iommu/dma-iommu.c
> +++ b/drivers/iommu/dma-iommu.c
> @@ -686,15 +686,15 @@ static int iommu_dma_init_domain(struct iommu_domain *domain, struct device *dev
>
> /* Check the domain allows at least some access to the device... */
> if (map) {
> - dma_addr_t base = dma_range_map_min(map);
> - if (base > domain->geometry.aperture_end ||
> + if (dma_range_map_min(map) > domain->geometry.aperture_end ||
> dma_range_map_max(map) < domain->geometry.aperture_start) {
> pr_warn("specified DMA range outside IOMMU capability\n");
> return -EFAULT;
> }
> - /* ...then finally give it a kicking to make sure it fits */
> - base_pfn = max(base, domain->geometry.aperture_start) >> order;
> }
> + /* ...then finally give it a kicking to make sure it fits */
> + base_pfn = max_t(unsigned long, base_pfn,
> + domain->geometry.aperture_start >> order);
>
> /* start_pfn is always nonzero for an already-initialised domain */
> mutex_lock(&cookie->mutex);