For performance reasons, sometimes using the minimum RX Coalesce value
is not optimal. Lets setup a default value that is optimal in most of
the use cases.
Signed-off-by: Jose Abreu <[email protected]>
---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 ++++---
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 912bbb6515b2..309ea12ea61f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -248,6 +248,7 @@ struct stmmac_safety_stats {
/* Max/Min RI Watchdog Timer count value */
#define MAX_DMA_RIWT 0xff
#define MIN_DMA_RIWT 0x10
+#define DEF_DMA_RIWT 0xa0
/* Tx coalesce parameters */
#define STMMAC_COAL_TX_TIMER 1000
#define STMMAC_MAX_COAL_TX_TICK 100000
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e3677883ea30..6136ada20c8e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2605,9 +2605,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
if (priv->use_riwt) {
- ret = stmmac_rx_watchdog(priv, priv->ioaddr, MIN_DMA_RIWT, rx_cnt);
- if (!ret)
- priv->rx_riwt = MIN_DMA_RIWT;
+ if (!priv->rx_riwt)
+ priv->rx_riwt = DEF_DMA_RIWT;
+
+ ret = stmmac_rx_watchdog(priv, priv->ioaddr, priv->rx_riwt, rx_cnt);
}
if (priv->hw->pcs)
--
2.7.4