----------------------------
NOTE, this will be the last 4.7.y kernel to be released. After this
one, the 4.7.y series is end-of-life. You should be moving to the 4.8.y
kernel series at this point in time.
----------------------------
This is the start of the stable review cycle for the 4.7.10 release.
There are 45 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Oct 23 09:14:13 UTC 2016.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.7.10-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.7.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.7.10-rc1
Glauber Costa <[email protected]>
cfq: fix starvation of asynchronous writes
David Howells <[email protected]>
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
Miklos Szeredi <[email protected]>
vfs: move permission checking into notify_change() for utimes(NULL)
Marcelo Ricardo Leitner <[email protected]>
dlm: free workqueues after the connections
Marcelo Cerri <[email protected]>
crypto: vmx - Fix memory corruption caused by p8_ghash
Marcelo Cerri <[email protected]>
crypto: ghash-generic - move common definitions to a new header file
Jan Kara <[email protected]>
ext4: unmap metadata when zeroing blocks
gmail <[email protected]>
ext4: release bh in make_indexed_dir
Ross Zwisler <[email protected]>
ext4: allow DAX writeback for hole punch
Fabian Frederick <[email protected]>
ext4: fix memory leak in ext4_insert_range()
wangguang <[email protected]>
ext4: bugfix for mmaped pages in mpage_release_unused_pages()
Daeho Jeong <[email protected]>
ext4: reinforce check of i_dtime when clearing high fields of uid and gid
Eric Whitney <[email protected]>
ext4: enforce online defrag restriction for encrypted files
Wei Fang <[email protected]>
vfs,mm: fix a dead loop in truncate_inode_pages_range()
Brian King <[email protected]>
scsi: ibmvfc: Fix I/O hang when port is not mapped
Borislav Petkov <[email protected]>
scsi: arcmsr: Simplify user_len checking
Dan Carpenter <[email protected]>
scsi: arcmsr: Buffer overflow in arcmsr_iop_message_xfer()
Justin Maggard <[email protected]>
async_pq_val: fix DMA memory leak
Mike Galbraith <[email protected]>
reiserfs: Unlock superblock before calling reiserfs_quota_on_mount()
Nicolas Iooss <[email protected]>
ASoC: Intel: Atom: add a missing star in a memcpy call
Rafał Miłecki <[email protected]>
brcmfmac: use correct skb freeing helper when deleting flowring
Rafał Miłecki <[email protected]>
brcmfmac: fix memory leak in brcmf_fill_bss_param
Nicolas Iooss <[email protected]>
brcmfmac: fix pmksa->bssid usage
Dave Chinner <[email protected]>
xfs: change mailing list address
Guilherme G Piccoli <[email protected]>
i40e: avoid NULL pointer dereference and recursive errors on early PCI error
Miklos Szeredi <[email protected]>
fuse: fix killing s[ug]id in setattr
Miklos Szeredi <[email protected]>
fuse: invalidate dir dentry after chmod
Miklos Szeredi <[email protected]>
fuse: listxattr: verify xattr list
Marcin Wojtas <[email protected]>
clk: mvebu: dynamically allocate resources in Armada CP110 system controller
Marcin Wojtas <[email protected]>
clk: mvebu: fix setting unwanted flags in CP110 gate clock
Mike Marciniszyn <[email protected]>
IB/hfi1: Fix defered ack race with qp destroy
Peng Fan <[email protected]>
drivers: base: dma-mapping: page align the size when unmap_kernel_range
Alexander Usyskin <[email protected]>
mei: amthif: fix deadlock in initialization during a reset
Junjie Mao <[email protected]>
btrfs: assign error values to the correct bio structs
Omar Sandoval <[email protected]>
Btrfs: catch invalid free space trees
Omar Sandoval <[email protected]>
Btrfs: fix free space tree bitmaps on big-endian systems
Christian Lamparter <[email protected]>
carl9170: fix debugfs crashes
Christian Lamparter <[email protected]>
b43legacy: fix debugfs crash
Christian Lamparter <[email protected]>
b43: fix debugfs crash
Christian Lamparter <[email protected]>
debugfs: introduce a public file_operations accessor
Vineet Gupta <[email protected]>
ARCv2: fix local_save_flags
Yuriy Kolerov <[email protected]>
ARCv2: intc: Use kflag if STATUS32.IE must be reset
Andy Shevchenko <[email protected]>
serial: 8250_port: fix runtime PM use in __do_stop_tx_rs485()
Kefeng Wang <[email protected]>
serial: 8250_dw: Check the data->pclk when get apb_pclk
Sascha Hauer <[email protected]>
serial: imx: Fix DCD reading
-------------
Diffstat:
MAINTAINERS | 7 +--
Makefile | 4 +-
arch/arc/include/asm/irqflags-arcv2.h | 2 +-
arch/arc/kernel/intc-arcv2.c | 2 +-
block/cfq-iosched.c | 13 ++++-
crypto/async_tx/async_pq.c | 8 +--
crypto/ghash-generic.c | 13 +----
drivers/base/dma-mapping.c | 2 +-
drivers/clk/mvebu/cp110-system-controller.c | 31 ++++++++---
drivers/crypto/vmx/ghash.c | 31 ++++++-----
drivers/infiniband/hw/hfi1/rc.c | 5 +-
drivers/misc/mei/amthif.c | 12 +++-
drivers/misc/mei/bus.c | 2 -
drivers/net/ethernet/intel/i40e/i40e_main.c | 6 ++
drivers/net/wireless/ath/carl9170/debug.c | 6 +-
drivers/net/wireless/broadcom/b43/debugfs.c | 6 +-
drivers/net/wireless/broadcom/b43legacy/debugfs.c | 6 +-
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 9 ++-
.../broadcom/brcm80211/brcmfmac/flowring.c | 9 ++-
drivers/scsi/arcmsr/arcmsr_hba.c | 12 +++-
drivers/scsi/ibmvscsi/ibmvfc.c | 1 -
drivers/tty/serial/8250/8250_dw.c | 2 +-
drivers/tty/serial/8250/8250_port.c | 11 ++--
drivers/tty/serial/imx.c | 3 +-
fs/attr.c | 15 +++++
fs/btrfs/compression.c | 4 +-
fs/btrfs/ctree.h | 3 +-
fs/btrfs/disk-io.c | 9 +++
fs/btrfs/extent_io.c | 64 ++++++++++++++++------
fs/btrfs/extent_io.h | 22 ++++++++
fs/btrfs/free-space-tree.c | 19 ++++---
fs/cachefiles/interface.c | 8 ++-
fs/cachefiles/internal.h | 3 +-
fs/cachefiles/namei.c | 8 +--
fs/debugfs/file.c | 13 ++---
fs/dlm/lowcomms.c | 8 +--
fs/ext4/extents.c | 3 +
fs/ext4/inode.c | 24 +++++---
fs/ext4/move_extent.c | 7 +++
fs/ext4/namei.c | 14 ++---
fs/fuse/dir.c | 59 ++++++++++++++++++--
fs/reiserfs/super.c | 12 +++-
fs/utimes.c | 16 +-----
include/crypto/ghash.h | 23 ++++++++
include/linux/debugfs.h | 17 ++++++
include/linux/fs.h | 1 +
include/uapi/linux/btrfs.h | 12 +++-
mm/filemap.c | 4 ++
sound/soc/intel/atom/sst/sst_pvt.c | 14 ++---
49 files changed, 412 insertions(+), 173 deletions(-)
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Junjie Mao <[email protected]>
commit 14155cafeadda946376260e2ad5d39a0528a332f upstream.
Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio")
Signed-off-by: Junjie Mao <[email protected]>
Acked-by: David Sterba <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/compression.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -690,7 +690,7 @@ int btrfs_submit_compressed_read(struct
ret = btrfs_map_bio(root, READ, comp_bio,
mirror_num, 0);
if (ret) {
- bio->bi_error = ret;
+ comp_bio->bi_error = ret;
bio_endio(comp_bio);
}
@@ -719,7 +719,7 @@ int btrfs_submit_compressed_read(struct
ret = btrfs_map_bio(root, READ, comp_bio, mirror_num, 0);
if (ret) {
- bio->bi_error = ret;
+ comp_bio->bi_error = ret;
bio_endio(comp_bio);
}
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Usyskin <[email protected]>
commit e728ae271f4cf71218ec06a6daf61b79466cb466 upstream.
The device lock was unnecessary obtained in bus rescan work before the
amthif client search. That causes incorrect lock ordering and task
hang:
...
[88004.613213] INFO: task kworker/1:14:21832 blocked for more than 120 seconds.
...
[88004.645934] Workqueue: events mei_cl_bus_rescan_work
...
The correct lock order is
cl_bus_lock
device_lock
me_clients_rwsem
Move device_lock into amthif init function that called
after me_clients_rwsem is released.
This fixes regression introduced by commit:
commit 025fb792bac3 ("mei: split amthif client init from end of clients enumeration")
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/mei/amthif.c | 12 +++++++++---
drivers/misc/mei/bus.c | 2 --
2 files changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -67,8 +67,12 @@ int mei_amthif_host_init(struct mei_devi
struct mei_cl *cl = &dev->iamthif_cl;
int ret;
- if (mei_cl_is_connected(cl))
- return 0;
+ mutex_lock(&dev->device_lock);
+
+ if (mei_cl_is_connected(cl)) {
+ ret = 0;
+ goto out;
+ }
dev->iamthif_state = MEI_IAMTHIF_IDLE;
@@ -77,11 +81,13 @@ int mei_amthif_host_init(struct mei_devi
ret = mei_cl_link(cl);
if (ret < 0) {
dev_err(dev->dev, "amthif: failed cl_link %d\n", ret);
- return ret;
+ goto out;
}
ret = mei_cl_connect(cl, me_cl, NULL);
+out:
+ mutex_unlock(&dev->device_lock);
return ret;
}
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -983,12 +983,10 @@ void mei_cl_bus_rescan_work(struct work_
container_of(work, struct mei_device, bus_rescan_work);
struct mei_me_client *me_cl;
- mutex_lock(&bus->device_lock);
me_cl = mei_me_cl_by_uuid(bus, &mei_amthif_guid);
if (me_cl)
mei_amthif_host_init(bus, me_cl);
mei_me_cl_put(me_cl);
- mutex_unlock(&bus->device_lock);
mei_cl_bus_rescan(bus);
}
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcin Wojtas <[email protected]>
commit ad715b268a501533ecb2e891a624841d1bb5137c upstream.
Armada CP110 system controller comprises its own routine responsble
for registering gate clocks. Among others 'flags' field in
struct clk_init_data was not set, using a random values, which
may cause an unpredicted behavior.
This patch fixes the problem by resetting all fields of clk_init_data
before assigning values for all gated clocks of Armada 7k/8k SoCs family.
Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system ...")
Signed-off-by: Marcin Wojtas <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/mvebu/cp110-system-controller.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/clk/mvebu/cp110-system-controller.c
+++ b/drivers/clk/mvebu/cp110-system-controller.c
@@ -142,6 +142,8 @@ static struct clk *cp110_register_gate(c
if (!gate)
return ERR_PTR(-ENOMEM);
+ memset(&init, 0, sizeof(init));
+
init.name = name;
init.ops = &cp110_gate_ops;
init.parent_names = &parent_name;
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit cb3ae6d25a5471be62bfe6ac1fccc0e91edeaba0 upstream.
Make sure userspace filesystem is returning a well formed list of xattr
names (zero or more nonzero length, null terminated strings).
[Michael Theall: only verify in the nonzero size case]
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dir.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1800,6 +1800,23 @@ static ssize_t fuse_getxattr(struct dent
return ret;
}
+static int fuse_verify_xattr_list(char *list, size_t size)
+{
+ size_t origsize = size;
+
+ while (size) {
+ size_t thislen = strnlen(list, size);
+
+ if (!thislen || thislen == size)
+ return -EIO;
+
+ size -= thislen + 1;
+ list += thislen + 1;
+ }
+
+ return origsize;
+}
+
static ssize_t fuse_listxattr(struct dentry *entry, char *list, size_t size)
{
struct inode *inode = d_inode(entry);
@@ -1835,6 +1852,8 @@ static ssize_t fuse_listxattr(struct den
ret = fuse_simple_request(fc, &args);
if (!ret && !size)
ret = outarg.size;
+ if (ret > 0 && size)
+ ret = fuse_verify_xattr_list(list, ret);
if (ret == -ENOSYS) {
fc->no_listxattr = 1;
ret = -EOPNOTSUPP;
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Chinner <[email protected]>
commit 541d48f05fa1c19a4a968d38df685529e728a20a upstream.
oss.sgi.com is going away, move contact details over to vger.
Signed-off-by: Dave Chinner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
MAINTAINERS | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12620,11 +12620,10 @@ F: arch/x86/xen/*swiotlb*
F: drivers/xen/*swiotlb*
XFS FILESYSTEM
-P: Silicon Graphics Inc
M: Dave Chinner <[email protected]>
-M: [email protected]
-L: [email protected]
-W: http://oss.sgi.com/projects/xfs
+M: [email protected]
+L: [email protected]
+W: http://xfs.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.git
S: Supported
F: Documentation/filesystems/xfs.txt
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Iooss <[email protected]>
commit 61ab0d403bbd9d5f6e000e3b5734049141b91f6f upstream.
In sst_prepare_and_post_msg(), when a response is received in "block",
the following code gets executed:
*data = kzalloc(block->size, GFP_KERNEL);
memcpy(data, (void *) block->data, block->size);
The memcpy() call overwrites the content of the *data pointer instead of
filling the newly-allocated memory (which pointer is hold by *data).
Fix this by merging kzalloc+memcpy into a single kmemdup() call.
Thanks Joe Perches for suggesting using kmemdup()
Fixes: 60dc8dbacb00 ("ASoC: Intel: sst: Add some helper functions")
Signed-off-by: Nicolas Iooss <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/intel/atom/sst/sst_pvt.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/sound/soc/intel/atom/sst/sst_pvt.c
+++ b/sound/soc/intel/atom/sst/sst_pvt.c
@@ -279,17 +279,15 @@ int sst_prepare_and_post_msg(struct inte
if (response) {
ret = sst_wait_timeout(sst, block);
- if (ret < 0) {
+ if (ret < 0)
goto out;
- } else if(block->data) {
- if (!data)
- goto out;
- *data = kzalloc(block->size, GFP_KERNEL);
- if (!(*data)) {
+
+ if (data && block->data) {
+ *data = kmemdup(block->data, block->size, GFP_KERNEL);
+ if (!*data) {
ret = -ENOMEM;
goto out;
- } else
- memcpy(data, (void *) block->data, block->size);
+ }
}
}
out:
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Galbraith <[email protected]>
commit 420902c9d086848a7548c83e0a49021514bd71b7 upstream.
If we hold the superblock lock while calling reiserfs_quota_on_mount(), we can
deadlock our own worker - mount blocks kworker/3:2, sleeps forever more.
crash> ps|grep UN
715 2 3 ffff880220734d30 UN 0.0 0 0 [kworker/3:2]
9369 9341 2 ffff88021ffb7560 UN 1.3 493404 123184 Xorg
9665 9664 3 ffff880225b92ab0 UN 0.0 47368 812 udisks-daemon
10635 10403 3 ffff880222f22c70 UN 0.0 14904 936 mount
crash> bt ffff880220734d30
PID: 715 TASK: ffff880220734d30 CPU: 3 COMMAND: "kworker/3:2"
#0 [ffff8802244c3c20] schedule at ffffffff8144584b
#1 [ffff8802244c3cc8] __rt_mutex_slowlock at ffffffff814472b3
#2 [ffff8802244c3d28] rt_mutex_slowlock at ffffffff814473f5
#3 [ffff8802244c3dc8] reiserfs_write_lock at ffffffffa05f28fd [reiserfs]
#4 [ffff8802244c3de8] flush_async_commits at ffffffffa05ec91d [reiserfs]
#5 [ffff8802244c3e08] process_one_work at ffffffff81073726
#6 [ffff8802244c3e68] worker_thread at ffffffff81073eba
#7 [ffff8802244c3ec8] kthread at ffffffff810782e0
#8 [ffff8802244c3f48] kernel_thread_helper at ffffffff81450064
crash> rd ffff8802244c3cc8 10
ffff8802244c3cc8: ffffffff814472b3 ffff880222f23250 .rD.....P2."....
ffff8802244c3cd8: 0000000000000000 0000000000000286 ................
ffff8802244c3ce8: ffff8802244c3d30 ffff880220734d80 0=L$.....Ms ....
ffff8802244c3cf8: ffff880222e8f628 0000000000000000 (.."............
ffff8802244c3d08: 0000000000000000 0000000000000002 ................
crash> struct rt_mutex ffff880222e8f628
struct rt_mutex {
wait_lock = {
raw_lock = {
slock = 65537
}
},
wait_list = {
node_list = {
next = 0xffff8802244c3d48,
prev = 0xffff8802244c3d48
}
},
owner = 0xffff880222f22c71,
save_state = 0
}
crash> bt 0xffff880222f22c70
PID: 10635 TASK: ffff880222f22c70 CPU: 3 COMMAND: "mount"
#0 [ffff8802216a9868] schedule at ffffffff8144584b
#1 [ffff8802216a9910] schedule_timeout at ffffffff81446865
#2 [ffff8802216a99a0] wait_for_common at ffffffff81445f74
#3 [ffff8802216a9a30] flush_work at ffffffff810712d3
#4 [ffff8802216a9ab0] schedule_on_each_cpu at ffffffff81074463
#5 [ffff8802216a9ae0] invalidate_bdev at ffffffff81178aba
#6 [ffff8802216a9af0] vfs_load_quota_inode at ffffffff811a3632
#7 [ffff8802216a9b50] dquot_quota_on_mount at ffffffff811a375c
#8 [ffff8802216a9b80] finish_unfinished at ffffffffa05dd8b0 [reiserfs]
#9 [ffff8802216a9cc0] reiserfs_fill_super at ffffffffa05de825 [reiserfs]
RIP: 00007f7b9303997a RSP: 00007ffff443c7a8 RFLAGS: 00010202
RAX: 00000000000000a5 RBX: ffffffff8144ef12 RCX: 00007f7b932e9ee0
RDX: 00007f7b93d9a400 RSI: 00007f7b93d9a3e0 RDI: 00007f7b93d9a3c0
RBP: 00007f7b93d9a2c0 R8: 00007f7b93d9a550 R9: 0000000000000001
R10: ffffffffc0ed040e R11: 0000000000000202 R12: 000000000000040e
R13: 0000000000000000 R14: 00000000c0ed040e R15: 00007ffff443ca20
ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b
Signed-off-by: Mike Galbraith <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Acked-by: Mike Galbraith <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/reiserfs/super.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -190,7 +190,15 @@ static int remove_save_link_only(struct
static int reiserfs_quota_on_mount(struct super_block *, int);
#endif
-/* look for uncompleted unlinks and truncates and complete them */
+/*
+ * Look for uncompleted unlinks and truncates and complete them
+ *
+ * Called with superblock write locked. If quotas are enabled, we have to
+ * release/retake lest we call dquot_quota_on_mount(), proceed to
+ * schedule_on_each_cpu() in invalidate_bdev() and deadlock waiting for the per
+ * cpu worklets to complete flush_async_commits() that in turn wait for the
+ * superblock write lock.
+ */
static int finish_unfinished(struct super_block *s)
{
INITIALIZE_PATH(path);
@@ -237,7 +245,9 @@ static int finish_unfinished(struct supe
quota_enabled[i] = 0;
continue;
}
+ reiserfs_write_unlock(s);
ret = reiserfs_quota_on_mount(s, i);
+ reiserfs_write_lock(s);
if (ret < 0)
reiserfs_warning(s, "reiserfs-2500",
"cannot turn on journaled "
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Justin Maggard <[email protected]>
commit c84750906b4818d4929fbf73a4ae6c113b94f52b upstream.
Add missing dmaengine_unmap_put(), so we don't OOM during RAID6 sync.
Fixes: 1786b943dad0 ("async_pq_val: convert to dmaengine_unmap_data")
Signed-off-by: Justin Maggard <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/async_tx/async_pq.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/crypto/async_tx/async_pq.c
+++ b/crypto/async_tx/async_pq.c
@@ -368,8 +368,6 @@ async_syndrome_val(struct page **blocks,
dma_set_unmap(tx, unmap);
async_tx_submit(chan, tx, submit);
-
- return tx;
} else {
struct page *p_src = P(blocks, disks);
struct page *q_src = Q(blocks, disks);
@@ -424,9 +422,11 @@ async_syndrome_val(struct page **blocks,
submit->cb_param = cb_param_orig;
submit->flags = flags_orig;
async_tx_sync_epilog(submit);
-
- return NULL;
+ tx = NULL;
}
+ dmaengine_unmap_put(unmap);
+
+ return tx;
}
EXPORT_SYMBOL_GPL(async_syndrome_val);
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yuriy Kolerov <[email protected]>
commit bc0c7ece6191d89f435e4e4016f74167430c6c21 upstream.
In the end of "arc_init_IRQ" STATUS32.IE flag is going to be affected by
"flag" instruction but "flag" never touches IE flag on ARCv2. So "kflag"
instruction must be used instead of "flag".
Signed-off-by: Yuriy Kolerov <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/kernel/intc-arcv2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -74,7 +74,7 @@ void arc_init_IRQ(void)
tmp = read_aux_reg(0xa);
tmp |= STATUS_AD_MASK | (irq_prio << 1);
tmp &= ~STATUS_IE_MASK;
- asm volatile("flag %0 \n"::"r"(tmp));
+ asm volatile("kflag %0 \n"::"r"(tmp));
}
static void arcv2_irq_mask(struct irq_data *data)
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Lamparter <[email protected]>
commit 51b275a6fe5601834b717351d6cbdb89bd1f308b upstream.
This patch fixes a crash that happens because b43's
debugfs code expects file->f_op to be a pointer to
its own b43_debugfs_fops struct. This is no longer
the case since commit 9fd4dcece43a
("debugfs: prevent access to possibly dead file_operations at file open")
Reviewed-by: Nicolai Stange <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/b43/debugfs.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/broadcom/b43/debugfs.c
+++ b/drivers/net/wireless/broadcom/b43/debugfs.c
@@ -524,7 +524,8 @@ static ssize_t b43_debugfs_read(struct f
goto out_unlock;
}
- dfops = container_of(file->f_op, struct b43_debugfs_fops, fops);
+ dfops = container_of(debugfs_real_fops(file),
+ struct b43_debugfs_fops, fops);
if (!dfops->read) {
err = -ENOSYS;
goto out_unlock;
@@ -585,7 +586,8 @@ static ssize_t b43_debugfs_write(struct
goto out_unlock;
}
- dfops = container_of(file->f_op, struct b43_debugfs_fops, fops);
+ dfops = container_of(debugfs_real_fops(file),
+ struct b43_debugfs_fops, fops);
if (!dfops->write) {
err = -ENOSYS;
goto out_unlock;
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Lamparter <[email protected]>
commit 6ee6d1cb391ca85b419f8d18bdfb1f020a5e859c upstream.
Ben Greear reported:
> I see lots of instability as soon as I load up the carl9710 NIC.
> My application is going to be poking at it's debugfs files...
>
> BUG: KASAN: slab-out-of-bounds in carl9170_debugfs_read+0xd5/0x2a0
> [carl9170] at addr 0xffff8801bc1208b0
> Read of size 8 by task btserver/5888
> =======================================================================
> BUG kmalloc-256 (Tainted: G W ): kasan: bad access detected
> -----------------------------------------------------------------------
>
> INFO: Allocated in seq_open+0x50/0x100 age=2690 cpu=2 pid=772
>...
This breakage was caused by the introduction of intermediate
fops in debugfs by commit 9fd4dcece43a
("debugfs: prevent access to possibly dead file_operations at file open")
Thankfully, the original/real fops are still available in d_fsdata.
Reported-by: Ben Greear <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/carl9170/debug.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/ath/carl9170/debug.c
+++ b/drivers/net/wireless/ath/carl9170/debug.c
@@ -75,7 +75,8 @@ static ssize_t carl9170_debugfs_read(str
if (!ar)
return -ENODEV;
- dfops = container_of(file->f_op, struct carl9170_debugfs_fops, fops);
+ dfops = container_of(debugfs_real_fops(file),
+ struct carl9170_debugfs_fops, fops);
if (!dfops->read)
return -ENOSYS;
@@ -127,7 +128,8 @@ static ssize_t carl9170_debugfs_write(st
if (!ar)
return -ENODEV;
- dfops = container_of(file->f_op, struct carl9170_debugfs_fops, fops);
+ dfops = container_of(debugfs_real_fops(file),
+ struct carl9170_debugfs_fops, fops);
if (!dfops->write)
return -ENOSYS;
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <[email protected]>
commit b3965767d86cf4534dfe1affbde0453d3224ed7f upstream.
There are calls to serial8250_rpm_{get|put}() in __do_stop_tx_rs485() that are
certainly placed in a wrong location. I dunno how it had been tested with
runtime PM enabled because it is obvious "sleep in atomic context" error.
Besides that serial8250_rpm_get() is called immediately after an IO just
happened. It implies that the device is already powered on, see implementation
of serial8250_em485_rts_after_send() and serial8250_clear_fifos() for the
details.
There is no bug have been seen due to, as I can guess, use of auto suspend mode
when scheduled transaction to suspend is invoked quite lately than it's needed
for a few writes to the port. It might be possible to trigger a warning if
stop_tx_timer fires when device is suspended.
Refactor the code to use runtime PM only in case of timer function.
Fixes: 0c66940d584d ("tty/serial/8250: fix RS485 half-duplex RX")
Cc: "Matwey V. Kornilov" <[email protected]>
Tested-by: Yegor Yefremov <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_port.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1415,12 +1415,8 @@ static void __do_stop_tx_rs485(struct ua
if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
serial8250_clear_fifos(p);
- serial8250_rpm_get(p);
-
p->ier |= UART_IER_RLSI | UART_IER_RDI;
serial_port_out(&p->port, UART_IER, p->ier);
-
- serial8250_rpm_put(p);
}
}
@@ -1430,6 +1426,7 @@ static void serial8250_em485_handle_stop
struct uart_8250_em485 *em485 = p->em485;
unsigned long flags;
+ serial8250_rpm_get(p);
spin_lock_irqsave(&p->port.lock, flags);
if (em485 &&
em485->active_timer == &em485->stop_tx_timer) {
@@ -1437,6 +1434,7 @@ static void serial8250_em485_handle_stop
em485->active_timer = NULL;
}
spin_unlock_irqrestore(&p->port.lock, flags);
+ serial8250_rpm_put(p);
}
static void __stop_tx_rs485(struct uart_8250_port *p)
@@ -1476,7 +1474,7 @@ static inline void __stop_tx(struct uart
unsigned char lsr = serial_in(p, UART_LSR);
/*
* To provide required timeing and allow FIFO transfer,
- * __stop_tx_rs485 must be called only when both FIFO and
+ * __stop_tx_rs485() must be called only when both FIFO and
* shift register are empty. It is for device driver to enable
* interrupt on TEMT.
*/
@@ -1485,9 +1483,10 @@ static inline void __stop_tx(struct uart
del_timer(&em485->start_tx_timer);
em485->active_timer = NULL;
+
+ __stop_tx_rs485(p);
}
__do_stop_tx(p);
- __stop_tx_rs485(p);
}
static void serial8250_stop_tx(struct uart_port *port)
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Fang <[email protected]>
commit c2a9737f45e27d8263ff9643f994bda9bac0b944 upstream.
We triggered a deadloop in truncate_inode_pages_range() on 32 bits
architecture with the test case bellow:
...
fd = open();
write(fd, buf, 4096);
preadv64(fd, &iovec, 1, 0xffffffff000);
ftruncate(fd, 0);
...
Then ftruncate() will not return forever.
The filesystem used in this case is ubifs, but it can be triggered on
many other filesystems.
When preadv64() is called with offset=0xffffffff000, a page with
index=0xffffffff will be added to the radix tree of ->mapping. Then
this page can be found in ->mapping with pagevec_lookup(). After that,
truncate_inode_pages_range(), which is called in ftruncate(), will fall
into an infinite loop:
- find a page with index=0xffffffff, since index>=end, this page won't
be truncated
- index++, and index become 0
- the page with index=0xffffffff will be found again
The data type of index is unsigned long, so index won't overflow to 0 on
64 bits architecture in this case, and the dead loop won't happen.
Since truncate_inode_pages_range() is executed with holding lock of
inode->i_rwsem, any operation related with this lock will be blocked,
and a hung task will happen, e.g.:
INFO: task truncate_test:3364 blocked for more than 120 seconds.
...
call_rwsem_down_write_failed+0x17/0x30
generic_file_write_iter+0x32/0x1c0
ubifs_write_iter+0xcc/0x170
__vfs_write+0xc4/0x120
vfs_write+0xb2/0x1b0
SyS_write+0x46/0xa0
The page with index=0xffffffff added to ->mapping is useless. Fix this
by checking the read position before allocating pages.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Wei Fang <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/filemap.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1609,6 +1609,10 @@ static ssize_t do_generic_file_read(stru
unsigned int prev_offset;
int error = 0;
+ if (unlikely(*ppos >= inode->i_sb->s_maxbytes))
+ return -EINVAL;
+ iov_iter_truncate(iter, inode->i_sb->s_maxbytes);
+
index = *ppos >> PAGE_SHIFT;
prev_index = ra->prev_pos >> PAGE_SHIFT;
prev_offset = ra->prev_pos & (PAGE_SIZE-1);
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcelo Ricardo Leitner <[email protected]>
commit 3a8db79889ce16930aff19b818f5b09651bb7644 upstream.
After backporting commit ee44b4bc054a ("dlm: use sctp 1-to-1 API")
series to a kernel with an older workqueue which didn't use RCU yet, it
was noticed that we are freeing the workqueues in dlm_lowcomms_stop()
too early as free_conn() will try to access that memory for canceling
the queued works if any.
This issue was introduced by commit 0d737a8cfd83 as before it such
attempt to cancel the queued works wasn't performed, so the issue was
not present.
This patch fixes it by simply inverting the free order.
Fixes: 0d737a8cfd83 ("dlm: fix race while closing connections")
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/dlm/lowcomms.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -1657,16 +1657,12 @@ void dlm_lowcomms_stop(void)
mutex_lock(&connections_lock);
dlm_allow_conn = 0;
foreach_conn(stop_conn);
+ clean_writequeues();
+ foreach_conn(free_conn);
mutex_unlock(&connections_lock);
work_stop();
- mutex_lock(&connections_lock);
- clean_writequeues();
-
- foreach_conn(free_conn);
-
- mutex_unlock(&connections_lock);
kmem_cache_destroy(con_cache);
}
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcelo Cerri <[email protected]>
commit 80da44c29d997e28c4442825f35f4ac339813877 upstream.
This patch changes the p8_ghash driver to use ghash-generic as a fixed
fallback implementation. This allows the correct value of descsize to be
defined directly in its shash_alg structure and avoids problems with
incorrect buffer sizes when its state is exported or imported.
Reported-by: Jan Stancek <[email protected]>
Fixes: cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module")
Signed-off-by: Marcelo Cerri <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/vmx/ghash.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
--- a/drivers/crypto/vmx/ghash.c
+++ b/drivers/crypto/vmx/ghash.c
@@ -26,16 +26,13 @@
#include <linux/hardirq.h>
#include <asm/switch_to.h>
#include <crypto/aes.h>
+#include <crypto/ghash.h>
#include <crypto/scatterwalk.h>
#include <crypto/internal/hash.h>
#include <crypto/b128ops.h>
#define IN_INTERRUPT in_interrupt()
-#define GHASH_BLOCK_SIZE (16)
-#define GHASH_DIGEST_SIZE (16)
-#define GHASH_KEY_LEN (16)
-
void gcm_init_p8(u128 htable[16], const u64 Xi[2]);
void gcm_gmult_p8(u64 Xi[2], const u128 htable[16]);
void gcm_ghash_p8(u64 Xi[2], const u128 htable[16],
@@ -55,16 +52,11 @@ struct p8_ghash_desc_ctx {
static int p8_ghash_init_tfm(struct crypto_tfm *tfm)
{
- const char *alg;
+ const char *alg = "ghash-generic";
struct crypto_shash *fallback;
struct crypto_shash *shash_tfm = __crypto_shash_cast(tfm);
struct p8_ghash_ctx *ctx = crypto_tfm_ctx(tfm);
- if (!(alg = crypto_tfm_alg_name(tfm))) {
- printk(KERN_ERR "Failed to get algorithm name.\n");
- return -ENOENT;
- }
-
fallback = crypto_alloc_shash(alg, 0, CRYPTO_ALG_NEED_FALLBACK);
if (IS_ERR(fallback)) {
printk(KERN_ERR
@@ -78,10 +70,18 @@ static int p8_ghash_init_tfm(struct cryp
crypto_shash_set_flags(fallback,
crypto_shash_get_flags((struct crypto_shash
*) tfm));
- ctx->fallback = fallback;
- shash_tfm->descsize = sizeof(struct p8_ghash_desc_ctx)
- + crypto_shash_descsize(fallback);
+ /* Check if the descsize defined in the algorithm is still enough. */
+ if (shash_tfm->descsize < sizeof(struct p8_ghash_desc_ctx)
+ + crypto_shash_descsize(fallback)) {
+ printk(KERN_ERR
+ "Desc size of the fallback implementation (%s) does not match the expected value: %lu vs %u\n",
+ alg,
+ shash_tfm->descsize - sizeof(struct p8_ghash_desc_ctx),
+ crypto_shash_descsize(fallback));
+ return -EINVAL;
+ }
+ ctx->fallback = fallback;
return 0;
}
@@ -113,7 +113,7 @@ static int p8_ghash_setkey(struct crypto
{
struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(tfm));
- if (keylen != GHASH_KEY_LEN)
+ if (keylen != GHASH_BLOCK_SIZE)
return -EINVAL;
preempt_disable();
@@ -211,7 +211,8 @@ struct shash_alg p8_ghash_alg = {
.update = p8_ghash_update,
.final = p8_ghash_final,
.setkey = p8_ghash_setkey,
- .descsize = sizeof(struct p8_ghash_desc_ctx),
+ .descsize = sizeof(struct p8_ghash_desc_ctx)
+ + sizeof(struct ghash_desc_ctx),
.base = {
.cra_name = "ghash",
.cra_driver_name = "p8_ghash",
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ross Zwisler <[email protected]>
commit cca32b7eeb4ea24fa6596650e06279ad9130af98 upstream.
Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
This is because the logic around filemap_write_and_wait_range() in
ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
not for dirty DAX exceptional entries.
Signed-off-by: Ross Zwisler <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3892,7 +3892,7 @@ int ext4_update_disksize_before_punch(st
}
/*
- * ext4_punch_hole: punches a hole in a file by releaseing the blocks
+ * ext4_punch_hole: punches a hole in a file by releasing the blocks
* associated with the given offset and length
*
* @inode: File inode
@@ -3921,7 +3921,7 @@ int ext4_punch_hole(struct inode *inode,
* Write out all dirty pages to avoid race conditions
* Then release them.
*/
- if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+ if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
ret = filemap_write_and_wait_range(mapping, offset,
offset + length - 1);
if (ret)
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcelo Cerri <[email protected]>
commit a397ba829d7f8aff4c90af3704573a28ccd61a59 upstream.
Move common values and types used by ghash-generic to a new header file
so drivers can directly use ghash-generic as a fallback implementation.
Fixes: cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module")
Signed-off-by: Marcelo Cerri <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/ghash-generic.c | 13 +------------
include/crypto/ghash.h | 23 +++++++++++++++++++++++
2 files changed, 24 insertions(+), 12 deletions(-)
--- a/crypto/ghash-generic.c
+++ b/crypto/ghash-generic.c
@@ -14,24 +14,13 @@
#include <crypto/algapi.h>
#include <crypto/gf128mul.h>
+#include <crypto/ghash.h>
#include <crypto/internal/hash.h>
#include <linux/crypto.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#define GHASH_BLOCK_SIZE 16
-#define GHASH_DIGEST_SIZE 16
-
-struct ghash_ctx {
- struct gf128mul_4k *gf128;
-};
-
-struct ghash_desc_ctx {
- u8 buffer[GHASH_BLOCK_SIZE];
- u32 bytes;
-};
-
static int ghash_init(struct shash_desc *desc)
{
struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
--- /dev/null
+++ b/include/crypto/ghash.h
@@ -0,0 +1,23 @@
+/*
+ * Common values for GHASH algorithms
+ */
+
+#ifndef __CRYPTO_GHASH_H__
+#define __CRYPTO_GHASH_H__
+
+#include <linux/types.h>
+#include <crypto/gf128mul.h>
+
+#define GHASH_BLOCK_SIZE 16
+#define GHASH_DIGEST_SIZE 16
+
+struct ghash_ctx {
+ struct gf128mul_4k *gf128;
+};
+
+struct ghash_desc_ctx {
+ u8 buffer[GHASH_BLOCK_SIZE];
+ u32 bytes;
+};
+
+#endif
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian King <[email protected]>
commit 07d0e9a847401ffd2f09bd450d41644cd090e81d upstream.
If a VFC port gets unmapped in the VIOS, it may not respond with a CRQ
init complete following H_REG_CRQ. If this occurs, we can end up having
called scsi_block_requests and not a resulting unblock until the init
complete happens, which may never occur, and we end up hanging I/O
requests. This patch ensures the host action stay set to
IBMVFC_HOST_ACTION_TGT_DEL so we move all rports into devloss state and
unblock unless we receive an init complete.
Signed-off-by: Brian King <[email protected]>
Acked-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -717,7 +717,6 @@ static int ibmvfc_reset_crq(struct ibmvf
spin_lock_irqsave(vhost->host->host_lock, flags);
vhost->state = IBMVFC_NO_CRQ;
vhost->logged_in = 0;
- ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
/* Clean out the queue */
memset(crq->msgs, 0, PAGE_SIZE);
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabian Frederick <[email protected]>
commit edf15aa180d7b98fe16bd3eda42f9dd0e60dee20 upstream.
Running xfstests generic/013 with kmemleak gives the following:
unreferenced object 0xffff8801d3d27de0 (size 96):
comm "fsstress", pid 4941, jiffies 4294860168 (age 53.485s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff818eaaf3>] kmemleak_alloc+0x23/0x40
[<ffffffff81179805>] __kmalloc+0xf5/0x1d0
[<ffffffff8122ef5c>] ext4_find_extent+0x1ec/0x2f0
[<ffffffff8123530c>] ext4_insert_range+0x34c/0x4a0
[<ffffffff81235942>] ext4_fallocate+0x4e2/0x8b0
[<ffffffff81181334>] vfs_fallocate+0x134/0x210
[<ffffffff8118203f>] SyS_fallocate+0x3f/0x60
[<ffffffff818efa9b>] entry_SYSCALL_64_fastpath+0x13/0x8f
[<ffffffffffffffff>] 0xffffffffffffffff
Problem seems mitigated by dropping refs and freeing path
when there's no path[depth].p_ext
Signed-off-by: Fabian Frederick <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/extents.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -5734,6 +5734,9 @@ int ext4_insert_range(struct inode *inod
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
}
+ } else {
+ ext4_ext_drop_refs(path);
+ kfree(path);
}
ret = ext4_es_remove_extent(inode, offset_lblk,
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 9b623df614576680cadeaa4d7e0b5884de8f7c17 upstream.
When zeroing blocks for DAX allocations, we also have to unmap aliases
in the block device mappings. Otherwise writeback can overwrite zeros
with stale data from block device page cache.
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -647,11 +647,19 @@ found:
/*
* We have to zeroout blocks before inserting them into extent
* status tree. Otherwise someone could look them up there and
- * use them before they are really zeroed.
+ * use them before they are really zeroed. We also have to
+ * unmap metadata before zeroing as otherwise writeback can
+ * overwrite zeros with stale data from block device.
*/
if (flags & EXT4_GET_BLOCKS_ZERO &&
map->m_flags & EXT4_MAP_MAPPED &&
map->m_flags & EXT4_MAP_NEW) {
+ ext4_lblk_t i;
+
+ for (i = 0; i < map->m_len; i++) {
+ unmap_underlying_metadata(inode->i_sb->s_bdev,
+ map->m_pblk + i);
+ }
ret = ext4_issue_zeroout(inode, map->m_lblk,
map->m_pblk, map->m_len);
if (ret) {
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: gmail <[email protected]>
commit e81d44778d1d57bbaef9e24c4eac7c8a7a401d40 upstream.
The commit 6050d47adcad: "ext4: bail out from make_indexed_dir() on
first error" could end up leaking bh2 in the error path.
[ Also avoid renaming bh2 to bh, which just confuses things --tytso ]
Signed-off-by: yangsheng <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2043,33 +2043,31 @@ static int make_indexed_dir(handle_t *ha
frame->entries = entries;
frame->at = entries;
frame->bh = bh;
- bh = bh2;
retval = ext4_handle_dirty_dx_node(handle, dir, frame->bh);
if (retval)
goto out_frames;
- retval = ext4_handle_dirty_dirent_node(handle, dir, bh);
+ retval = ext4_handle_dirty_dirent_node(handle, dir, bh2);
if (retval)
goto out_frames;
- de = do_split(handle,dir, &bh, frame, &fname->hinfo);
+ de = do_split(handle,dir, &bh2, frame, &fname->hinfo);
if (IS_ERR(de)) {
retval = PTR_ERR(de);
goto out_frames;
}
- dx_release(frames);
- retval = add_dirent_to_buf(handle, fname, dir, inode, de, bh);
- brelse(bh);
- return retval;
+ retval = add_dirent_to_buf(handle, fname, dir, inode, de, bh2);
out_frames:
/*
* Even if the block split failed, we have to properly write
* out all the changes we did so far. Otherwise we can end up
* with corrupted filesystem.
*/
- ext4_mark_inode_dirty(handle, dir);
+ if (retval)
+ ext4_mark_inode_dirty(handle, dir);
dx_release(frames);
+ brelse(bh2);
return retval;
}
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daeho Jeong <[email protected]>
commit 93e3b4e6631d2a74a8cf7429138096862ff9f452 upstream.
Now, ext4_do_update_inode() clears high 16-bit fields of uid/gid
of deleted and evicted inode to fix up interoperability with old
kernels. However, it checks only i_dtime of an inode to determine
whether the inode was deleted and evicted, and this is very risky,
because i_dtime can be used for the pointer maintaining orphan inode
list, too. We need to further check whether the i_dtime is being
used for the orphan inode list even if the i_dtime is not NULL.
We found that high 16-bit fields of uid/gid of inode are unintentionally
and permanently cleared when the inode truncation is just triggered,
but not finished, and the inode metadata, whose high uid/gid bits are
cleared, is written on disk, and the sudden power-off follows that
in order.
Signed-off-by: Daeho Jeong <[email protected]>
Signed-off-by: Hobin Woo <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4814,14 +4814,14 @@ static int ext4_do_update_inode(handle_t
* Fix up interoperability with old kernels. Otherwise, old inodes get
* re-used with the upper 16 bits of the uid/gid intact
*/
- if (!ei->i_dtime) {
+ if (ei->i_dtime && list_empty(&ei->i_orphan)) {
+ raw_inode->i_uid_high = 0;
+ raw_inode->i_gid_high = 0;
+ } else {
raw_inode->i_uid_high =
cpu_to_le16(high_16_bits(i_uid));
raw_inode->i_gid_high =
cpu_to_le16(high_16_bits(i_gid));
- } else {
- raw_inode->i_uid_high = 0;
- raw_inode->i_gid_high = 0;
}
} else {
raw_inode->i_uid_low = cpu_to_le16(fs_high2lowuid(i_uid));
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
commit a818101d7b92e76db2f9a597e4830734767473b9 upstream.
An NULL-pointer dereference happens in cachefiles_mark_object_inactive()
when it tries to read i_blocks so that it can tell the cachefilesd daemon
how much space it's making available.
The problem is that cachefiles_drop_object() calls
cachefiles_mark_object_inactive() after calling cachefiles_delete_object()
because the object being marked active staves off attempts to (re-)use the
file at that filename until after it has been deleted. This means that
d_inode is NULL by the time we come to try to access it.
To fix the problem, have the caller of cachefiles_mark_object_inactive()
supply the number of blocks freed up.
Without this, the following oops may occur:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
IP: [<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles]
...
CPU: 11 PID: 527 Comm: kworker/u64:4 Tainted: G I ------------ 3.10.0-470.el7.x86_64 #1
Hardware name: Hewlett-Packard HP Z600 Workstation/0B54h, BIOS 786G4 v03.19 03/11/2011
Workqueue: fscache_object fscache_object_work_func [fscache]
task: ffff880035edaf10 ti: ffff8800b77c0000 task.ti: ffff8800b77c0000
RIP: 0010:[<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles]
RSP: 0018:ffff8800b77c3d70 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8800bf6cc400 RCX: 0000000000000034
RDX: 0000000000000000 RSI: ffff880090ffc710 RDI: ffff8800bf761ef8
RBP: ffff8800b77c3d88 R08: 2000000000000000 R09: 0090ffc710000000
R10: ff51005d2ff1c400 R11: 0000000000000000 R12: ffff880090ffc600
R13: ffff8800bf6cc520 R14: ffff8800bf6cc400 R15: ffff8800bf6cc498
FS: 0000000000000000(0000) GS:ffff8800bb8c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000098 CR3: 00000000019ba000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
ffff880090ffc600 ffff8800bf6cc400 ffff8800867df140 ffff8800b77c3db0
ffffffffa06c48cb ffff880090ffc600 ffff880090ffc180 ffff880090ffc658
ffff8800b77c3df0 ffffffffa085d846 ffff8800a96b8150 ffff880090ffc600
Call Trace:
[<ffffffffa06c48cb>] cachefiles_drop_object+0x6b/0xf0 [cachefiles]
[<ffffffffa085d846>] fscache_drop_object+0xd6/0x1e0 [fscache]
[<ffffffffa085d615>] fscache_object_work_func+0xa5/0x200 [fscache]
[<ffffffff810a605b>] process_one_work+0x17b/0x470
[<ffffffff810a6e96>] worker_thread+0x126/0x410
[<ffffffff810a6d70>] ? rescuer_thread+0x460/0x460
[<ffffffff810ae64f>] kthread+0xcf/0xe0
[<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140
[<ffffffff81695418>] ret_from_fork+0x58/0x90
[<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140
The oopsing code shows:
callq 0xffffffff810af6a0 <wake_up_bit>
mov 0xf8(%r12),%rax
mov 0x30(%rax),%rax
mov 0x98(%rax),%rax <---- oops here
lock add %rax,0x130(%rbx)
where this is:
d_backing_inode(object->dentry)->i_blocks
Fixes: a5b3a80b899bda0f456f1246c4c5a1191ea01519 (CacheFiles: Provide read-and-reset release counters for cachefilesd)
Reported-by: Jianhong Yin <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Reviewed-by: Steve Dickson <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cachefiles/interface.c | 8 +++++++-
fs/cachefiles/internal.h | 3 ++-
fs/cachefiles/namei.c | 8 ++++----
3 files changed, 13 insertions(+), 6 deletions(-)
--- a/fs/cachefiles/interface.c
+++ b/fs/cachefiles/interface.c
@@ -253,6 +253,8 @@ static void cachefiles_drop_object(struc
struct cachefiles_object *object;
struct cachefiles_cache *cache;
const struct cred *saved_cred;
+ struct inode *inode;
+ blkcnt_t i_blocks = 0;
ASSERT(_object);
@@ -279,6 +281,10 @@ static void cachefiles_drop_object(struc
_object != cache->cache.fsdef
) {
_debug("- retire object OBJ%x", object->fscache.debug_id);
+ inode = d_backing_inode(object->dentry);
+ if (inode)
+ i_blocks = inode->i_blocks;
+
cachefiles_begin_secure(cache, &saved_cred);
cachefiles_delete_object(cache, object);
cachefiles_end_secure(cache, saved_cred);
@@ -292,7 +298,7 @@ static void cachefiles_drop_object(struc
/* note that the object is now inactive */
if (test_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags))
- cachefiles_mark_object_inactive(cache, object);
+ cachefiles_mark_object_inactive(cache, object, i_blocks);
dput(object->dentry);
object->dentry = NULL;
--- a/fs/cachefiles/internal.h
+++ b/fs/cachefiles/internal.h
@@ -160,7 +160,8 @@ extern char *cachefiles_cook_key(const u
* namei.c
*/
extern void cachefiles_mark_object_inactive(struct cachefiles_cache *cache,
- struct cachefiles_object *object);
+ struct cachefiles_object *object,
+ blkcnt_t i_blocks);
extern int cachefiles_delete_object(struct cachefiles_cache *cache,
struct cachefiles_object *object);
extern int cachefiles_walk_to_object(struct cachefiles_object *parent,
--- a/fs/cachefiles/namei.c
+++ b/fs/cachefiles/namei.c
@@ -261,10 +261,9 @@ requeue:
* Mark an object as being inactive.
*/
void cachefiles_mark_object_inactive(struct cachefiles_cache *cache,
- struct cachefiles_object *object)
+ struct cachefiles_object *object,
+ blkcnt_t i_blocks)
{
- blkcnt_t i_blocks = d_backing_inode(object->dentry)->i_blocks;
-
write_lock(&cache->active_lock);
rb_erase(&object->active_node, &cache->active_nodes);
clear_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags);
@@ -707,7 +706,8 @@ mark_active_timed_out:
check_error:
_debug("check error %d", ret);
- cachefiles_mark_object_inactive(cache, object);
+ cachefiles_mark_object_inactive(
+ cache, object, d_backing_inode(object->dentry)->i_blocks);
release_dentry:
dput(object->dentry);
object->dentry = NULL;
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Whitney <[email protected]>
commit 14fbd4aa613bd5110556c281799ce36dc6f3ba97 upstream.
Online defragging of encrypted files is not currently implemented.
However, the move extent ioctl can still return successfully when
called. For example, this occurs when xfstest ext4/020 is run on an
encrypted file system, resulting in a corrupted test file and a
corresponding test failure.
Until the proper functionality is implemented, fail the move extent
ioctl if either the original or donor file is encrypted.
Signed-off-by: Eric Whitney <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/move_extent.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -598,6 +598,13 @@ ext4_move_extents(struct file *o_filp, s
return -EOPNOTSUPP;
}
+ if (ext4_encrypted_inode(orig_inode) ||
+ ext4_encrypted_inode(donor_inode)) {
+ ext4_msg(orig_inode->i_sb, KERN_ERR,
+ "Online defrag not supported for encrypted files");
+ return -EOPNOTSUPP;
+ }
+
/* Protect orig and donor inodes against a truncate */
lock_two_nondirectories(orig_inode, donor_inode);
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit f2b20f6ee842313a0d681dbbf7f87b70291a6a3b upstream.
This fixes a bug where the permission was not properly checked in
overlayfs. The testcase is ltp/utimensat01.
It is also cleaner and safer to do the permission checking in the vfs
helper instead of the caller.
This patch introduces an additional ia_valid flag ATTR_TOUCH (since
touch(1) is the most obvious user of utimes(NULL)) that is passed into
notify_change whenever the conditions for this special permission checking
mode are met.
Reported-by: Aihua Zhang <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Tested-by: Aihua Zhang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/attr.c | 15 +++++++++++++++
fs/utimes.c | 16 +---------------
include/linux/fs.h | 1 +
3 files changed, 17 insertions(+), 15 deletions(-)
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -202,6 +202,21 @@ int notify_change(struct dentry * dentry
return -EPERM;
}
+ /*
+ * If utimes(2) and friends are called with times == NULL (or both
+ * times are UTIME_NOW), then we need to check for write permission
+ */
+ if (ia_valid & ATTR_TOUCH) {
+ if (IS_IMMUTABLE(inode))
+ return -EPERM;
+
+ if (!inode_owner_or_capable(inode)) {
+ error = inode_permission(inode, MAY_WRITE);
+ if (error)
+ return error;
+ }
+ }
+
if ((ia_valid & ATTR_MODE)) {
umode_t amode = attr->ia_mode;
/* Flag setting protected by i_mutex */
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -87,20 +87,7 @@ static int utimes_common(struct path *pa
*/
newattrs.ia_valid |= ATTR_TIMES_SET;
} else {
- /*
- * If times is NULL (or both times are UTIME_NOW),
- * then we need to check permissions, because
- * inode_change_ok() won't do it.
- */
- error = -EACCES;
- if (IS_IMMUTABLE(inode))
- goto mnt_drop_write_and_out;
-
- if (!inode_owner_or_capable(inode)) {
- error = inode_permission(inode, MAY_WRITE);
- if (error)
- goto mnt_drop_write_and_out;
- }
+ newattrs.ia_valid |= ATTR_TOUCH;
}
retry_deleg:
inode_lock(inode);
@@ -112,7 +99,6 @@ retry_deleg:
goto retry_deleg;
}
-mnt_drop_write_and_out:
mnt_drop_write(path->mnt);
out:
return error;
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -228,6 +228,7 @@ typedef int (dio_iodone_t)(struct kiocb
#define ATTR_KILL_PRIV (1 << 14)
#define ATTR_OPEN (1 << 15) /* Truncating from open(O_TRUNC) */
#define ATTR_TIMES_SET (1 << 16)
+#define ATTR_TOUCH (1 << 17)
/*
* Whiteout is represented by a char device. The following constants define the
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Lamparter <[email protected]>
commit 9c4a45b17e094a090e96beb1138e34c2a10c6b8c upstream.
This patch fixes a crash that happens because b43legacy's
debugfs code expects file->f_op to be a pointer to its own
b43legacy_debugfs_fops struct. This is no longer the case
since commit 9fd4dcece43a
("debugfs: prevent access to possibly dead file_operations at file open")
Reviewed-by: Nicolai Stange <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/b43legacy/debugfs.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/broadcom/b43legacy/debugfs.c
+++ b/drivers/net/wireless/broadcom/b43legacy/debugfs.c
@@ -221,7 +221,8 @@ static ssize_t b43legacy_debugfs_read(st
goto out_unlock;
}
- dfops = container_of(file->f_op, struct b43legacy_debugfs_fops, fops);
+ dfops = container_of(debugfs_real_fops(file),
+ struct b43legacy_debugfs_fops, fops);
if (!dfops->read) {
err = -ENOSYS;
goto out_unlock;
@@ -287,7 +288,8 @@ static ssize_t b43legacy_debugfs_write(s
goto out_unlock;
}
- dfops = container_of(file->f_op, struct b43legacy_debugfs_fops, fops);
+ dfops = container_of(debugfs_real_fops(file),
+ struct b43legacy_debugfs_fops, fops);
if (!dfops->write) {
err = -ENOSYS;
goto out_unlock;
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Glauber Costa <[email protected]>
commit 3932a86b4b9d1f0b049d64d4591ce58ad18b44ec upstream.
While debugging timeouts happening in my application workload (ScyllaDB), I have
observed calls to open() taking a long time, ranging everywhere from 2 seconds -
the first ones that are enough to time out my application - to more than 30
seconds.
The problem seems to happen because XFS may block on pending metadata updates
under certain circumnstances, and that's confirmed with the following backtrace
taken by the offcputime tool (iovisor/bcc):
ffffffffb90c57b1 finish_task_switch
ffffffffb97dffb5 schedule
ffffffffb97e310c schedule_timeout
ffffffffb97e1f12 __down
ffffffffb90ea821 down
ffffffffc046a9dc xfs_buf_lock
ffffffffc046abfb _xfs_buf_find
ffffffffc046ae4a xfs_buf_get_map
ffffffffc046babd xfs_buf_read_map
ffffffffc0499931 xfs_trans_read_buf_map
ffffffffc044a561 xfs_da_read_buf
ffffffffc0451390 xfs_dir3_leaf_read.constprop.16
ffffffffc0452b90 xfs_dir2_leaf_lookup_int
ffffffffc0452e0f xfs_dir2_leaf_lookup
ffffffffc044d9d3 xfs_dir_lookup
ffffffffc047d1d9 xfs_lookup
ffffffffc0479e53 xfs_vn_lookup
ffffffffb925347a path_openat
ffffffffb9254a71 do_filp_open
ffffffffb9242a94 do_sys_open
ffffffffb9242b9e sys_open
ffffffffb97e42b2 entry_SYSCALL_64_fastpath
00007fb0698162ed [unknown]
Inspecting my run with blktrace, I can see that the xfsaild kthread exhibit very
high "Dispatch wait" times, on the dozens of seconds range and consistent with
the open() times I have saw in that run.
Still from the blktrace output, we can after searching a bit, identify the
request that wasn't dispatched:
8,0 11 152 81.092472813 804 A WM 141698288 + 8 <- (8,1) 141696240
8,0 11 153 81.092472889 804 Q WM 141698288 + 8 [xfsaild/sda1]
8,0 11 154 81.092473207 804 G WM 141698288 + 8 [xfsaild/sda1]
8,0 11 206 81.092496118 804 I WM 141698288 + 8 ( 22911) [xfsaild/sda1]
<==== 'I' means Inserted (into the IO scheduler) ===================================>
8,0 0 289372 96.718761435 0 D WM 141698288 + 8 (15626265317) [swapper/0]
<==== Only 15s later the CFQ scheduler dispatches the request ======================>
As we can see above, in this particular example CFQ took 15 seconds to dispatch
this request. Going back to the full trace, we can see that the xfsaild queue
had plenty of opportunity to run, and it was selected as the active queue many
times. It would just always be preempted by something else (example):
8,0 1 0 81.117912979 0 m N cfq1618SN / insert_request
8,0 1 0 81.117913419 0 m N cfq1618SN / add_to_rr
8,0 1 0 81.117914044 0 m N cfq1618SN / preempt
8,0 1 0 81.117914398 0 m N cfq767A / slice expired t=1
8,0 1 0 81.117914755 0 m N cfq767A / resid=40
8,0 1 0 81.117915340 0 m N / served: vt=1948520448 min_vt=1948520448
8,0 1 0 81.117915858 0 m N cfq767A / sl_used=1 disp=0 charge=0 iops=1 sect=0
where cfq767 is the xfsaild queue and cfq1618 corresponds to one of the ScyllaDB
IO dispatchers.
The requests preempting the xfsaild queue are synchronous requests. That's a
characteristic of ScyllaDB workloads, as we only ever issue O_DIRECT requests.
While it can be argued that preempting ASYNC requests in favor of SYNC is part
of the CFQ logic, I don't believe that doing so for 15+ seconds is anyone's
goal.
Moreover, unless I am misunderstanding something, that breaks the expectation
set by the "fifo_expire_async" tunable, which in my system is set to the
default.
Looking at the code, it seems to me that the issue is that after we make
an async queue active, there is no guarantee that it will execute any request.
When the queue itself tests if it cfq_may_dispatch() it can bail if it sees SYNC
requests in flight. An incoming request from another queue can also preempt it
in such situation before we have the chance to execute anything (as seen in the
trace above).
This patch sets the must_dispatch flag if we notice that we have requests
that are already fifo_expired. This flag is always cleared after
cfq_dispatch_request() returns from cfq_dispatch_requests(), so it won't pin
the queue for subsequent requests (unless they are themselves expired)
Care is taken during preempt to still allow rt requests to preempt us
regardless.
Testing my workload with this patch applied produces much better results.
>From the application side I see no timeouts, and the open() latency histogram
generated by systemtap looks much better, with the worst outlier at 131ms:
Latency histogram of xfs_buf_lock acquisition (microseconds):
value |-------------------------------------------------- count
0 | 11
1 |@@@@ 161
2 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 1966
4 |@ 54
8 | 36
16 | 7
32 | 0
64 | 0
~
1024 | 0
2048 | 0
4096 | 1
8192 | 1
16384 | 2
32768 | 0
65536 | 0
131072 | 1
262144 | 0
524288 | 0
Signed-off-by: Glauber Costa <[email protected]>
CC: Jens Axboe <[email protected]>
CC: [email protected]
CC: [email protected]
Signed-off-by: Glauber Costa <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/cfq-iosched.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -3021,7 +3021,6 @@ static struct request *cfq_check_fifo(st
if (time_before(jiffies, rq->fifo_time))
rq = NULL;
- cfq_log_cfqq(cfqq->cfqd, cfqq, "fifo=%p", rq);
return rq;
}
@@ -3395,6 +3394,9 @@ static bool cfq_may_dispatch(struct cfq_
{
unsigned int max_dispatch;
+ if (cfq_cfqq_must_dispatch(cfqq))
+ return true;
+
/*
* Drain async requests before we start sync IO
*/
@@ -3486,15 +3488,20 @@ static bool cfq_dispatch_request(struct
BUG_ON(RB_EMPTY_ROOT(&cfqq->sort_list));
+ rq = cfq_check_fifo(cfqq);
+ if (rq)
+ cfq_mark_cfqq_must_dispatch(cfqq);
+
if (!cfq_may_dispatch(cfqd, cfqq))
return false;
/*
* follow expired path, else get first next available
*/
- rq = cfq_check_fifo(cfqq);
if (!rq)
rq = cfqq->next_rq;
+ else
+ cfq_log_cfqq(cfqq->cfqd, cfqq, "fifo=%p", rq);
/*
* insert request into driver dispatch list
@@ -3962,7 +3969,7 @@ cfq_should_preempt(struct cfq_data *cfqd
* if the new request is sync, but the currently running queue is
* not, let the sync request have priority.
*/
- if (rq_is_sync(rq) && !cfq_cfqq_sync(cfqq))
+ if (rq_is_sync(rq) && !cfq_cfqq_sync(cfqq) && !cfq_cfqq_must_dispatch(cfqq))
return true;
/*
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Lamparter <[email protected]>
commit 86f0e06767dda7863d6d2a8f0b3b857e6ea876a0 upstream.
This patch introduces an accessor which can be used
by the users of debugfs (drivers, fs, ...) to get the
original file_operations struct. It also removes the
REAL_FOPS_DEREF macro in file.c and converts the code
to use the public version.
Previously, REAL_FOPS_DEREF was only available within
the file.c of debugfs. But having a public getter
available for debugfs users is important as some
drivers (carl9170 and b43) use the pointer of the
original file_operations in conjunction with container_of()
within their debugfs implementations.
Reviewed-by: Nicolai Stange <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/debugfs/file.c | 13 +++++--------
include/linux/debugfs.h | 17 +++++++++++++++++
2 files changed, 22 insertions(+), 8 deletions(-)
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -97,9 +97,6 @@ EXPORT_SYMBOL_GPL(debugfs_use_file_finis
#define F_DENTRY(filp) ((filp)->f_path.dentry)
-#define REAL_FOPS_DEREF(dentry) \
- ((const struct file_operations *)(dentry)->d_fsdata)
-
static int open_proxy_open(struct inode *inode, struct file *filp)
{
const struct dentry *dentry = F_DENTRY(filp);
@@ -112,7 +109,7 @@ static int open_proxy_open(struct inode
goto out;
}
- real_fops = REAL_FOPS_DEREF(dentry);
+ real_fops = debugfs_real_fops(filp);
real_fops = fops_get(real_fops);
if (!real_fops) {
/* Huh? Module did not clean up after itself at exit? */
@@ -143,7 +140,7 @@ static ret_type full_proxy_ ## name(prot
{ \
const struct dentry *dentry = F_DENTRY(filp); \
const struct file_operations *real_fops = \
- REAL_FOPS_DEREF(dentry); \
+ debugfs_real_fops(filp); \
int srcu_idx; \
ret_type r; \
\
@@ -176,7 +173,7 @@ static unsigned int full_proxy_poll(stru
struct poll_table_struct *wait)
{
const struct dentry *dentry = F_DENTRY(filp);
- const struct file_operations *real_fops = REAL_FOPS_DEREF(dentry);
+ const struct file_operations *real_fops = debugfs_real_fops(filp);
int srcu_idx;
unsigned int r = 0;
@@ -193,7 +190,7 @@ static unsigned int full_proxy_poll(stru
static int full_proxy_release(struct inode *inode, struct file *filp)
{
const struct dentry *dentry = F_DENTRY(filp);
- const struct file_operations *real_fops = REAL_FOPS_DEREF(dentry);
+ const struct file_operations *real_fops = debugfs_real_fops(filp);
const struct file_operations *proxy_fops = filp->f_op;
int r = 0;
@@ -241,7 +238,7 @@ static int full_proxy_open(struct inode
goto out;
}
- real_fops = REAL_FOPS_DEREF(dentry);
+ real_fops = debugfs_real_fops(filp);
real_fops = fops_get(real_fops);
if (!real_fops) {
/* Huh? Module did not cleanup after itself at exit? */
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -45,6 +45,23 @@ extern struct dentry *arch_debugfs_dir;
extern struct srcu_struct debugfs_srcu;
+/**
+ * debugfs_real_fops - getter for the real file operation
+ * @filp: a pointer to a struct file
+ *
+ * Must only be called under the protection established by
+ * debugfs_use_file_start().
+ */
+static inline const struct file_operations *debugfs_real_fops(struct file *filp)
+ __must_hold(&debugfs_srcu)
+{
+ /*
+ * Neither the pointer to the struct file_operations, nor its
+ * contents ever change -- srcu_dereference() is not needed here.
+ */
+ return filp->f_path.dentry->d_fsdata;
+}
+
#if defined(CONFIG_DEBUG_FS)
struct dentry *debugfs_create_file(const char *name, umode_t mode,
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vineet Gupta <[email protected]>
commit cd5d38b052384daa2893e9a1d94900d5a20ed4b5 upstream.
Commit d9676fa152c83b ("ARCv2: Enable LOCKDEP"), changed
local_save_flags() to not return raw STATUS32 but encoded in the form
such that it could be fed directly to CLRI/SETI instructions.
However the STATUS32.E[] was not captured correctly as it corresponds to
bits [4:1] in the register and not [3:0]
Fixes: d9676fa152c83b ("ARCv2: Enable LOCKDEP")
Cc: Evgeny Voevodin <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/include/asm/irqflags-arcv2.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arc/include/asm/irqflags-arcv2.h
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@@ -112,7 +112,7 @@ static inline long arch_local_save_flags
*/
temp = (1 << 5) |
((!!(temp & STATUS_IE_MASK)) << CLRI_STATUS_IE_BIT) |
- (temp & CLRI_STATUS_E_MASK);
+ ((temp >> 1) & CLRI_STATUS_E_MASK);
return temp;
}
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit 4bd173c30792791a6daca8c64793ec0a4ae8324f upstream.
Do the user_len check first and then the ver_addr allocation so that we
can save us the kfree() on the error path when user_len is >
ARCMSR_API_DATA_BUFLEN.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Marco Grassi <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Tomas Henzl <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Tomas Henzl <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/arcmsr/arcmsr_hba.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -2391,18 +2391,20 @@ static int arcmsr_iop_message_xfer(struc
uint32_t user_len;
int32_t cnt2end;
uint8_t *pQbuffer, *ptmpuserbuffer;
- ver_addr = kmalloc(ARCMSR_API_DATA_BUFLEN, GFP_ATOMIC);
- if (!ver_addr) {
+
+ user_len = pcmdmessagefld->cmdmessage.Length;
+ if (user_len > ARCMSR_API_DATA_BUFLEN) {
retvalue = ARCMSR_MESSAGE_FAIL;
goto message_out;
}
- ptmpuserbuffer = ver_addr;
- user_len = pcmdmessagefld->cmdmessage.Length;
- if (user_len > ARCMSR_API_DATA_BUFLEN) {
+
+ ver_addr = kmalloc(ARCMSR_API_DATA_BUFLEN, GFP_ATOMIC);
+ if (!ver_addr) {
retvalue = ARCMSR_MESSAGE_FAIL;
- kfree(ver_addr);
goto message_out;
}
+ ptmpuserbuffer = ver_addr;
+
memcpy(ptmpuserbuffer,
pcmdmessagefld->messagedatabuffer, user_len);
spin_lock_irqsave(&acb->wqbuffer_lock, flags);
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 7bc2b55a5c030685b399bb65b6baa9ccc3d1f167 upstream.
We need to put an upper bound on "user_len" so the memcpy() doesn't
overflow.
Reported-by: Marco Grassi <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Tomas Henzl <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/arcmsr/arcmsr_hba.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -2388,7 +2388,8 @@ static int arcmsr_iop_message_xfer(struc
}
case ARCMSR_MESSAGE_WRITE_WQBUFFER: {
unsigned char *ver_addr;
- int32_t user_len, cnt2end;
+ uint32_t user_len;
+ int32_t cnt2end;
uint8_t *pQbuffer, *ptmpuserbuffer;
ver_addr = kmalloc(ARCMSR_API_DATA_BUFLEN, GFP_ATOMIC);
if (!ver_addr) {
@@ -2397,6 +2398,11 @@ static int arcmsr_iop_message_xfer(struc
}
ptmpuserbuffer = ver_addr;
user_len = pcmdmessagefld->cmdmessage.Length;
+ if (user_len > ARCMSR_API_DATA_BUFLEN) {
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ kfree(ver_addr);
+ goto message_out;
+ }
memcpy(ptmpuserbuffer,
pcmdmessagefld->messagedatabuffer, user_len);
spin_lock_irqsave(&acb->wqbuffer_lock, flags);
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Iooss <[email protected]>
commit 7703773ef1d85b40433902a8da20167331597e4a upstream.
The struct cfg80211_pmksa defines its bssid field as:
const u8 *bssid;
contrary to struct brcmf_pmksa, which uses:
u8 bssid[ETH_ALEN];
Therefore in brcmf_cfg80211_del_pmksa(), &pmksa->bssid takes the address
of this field (of type u8**), not the one of its content (which would be
u8*). Remove the & operator to make brcmf_dbg("%pM") and memcmp()
behave as expected.
This bug have been found using a custom static checker (which checks the
usage of %p... attributes at build time). It has been introduced in
commit 6c404f34f2bd ("brcmfmac: Cleanup pmksa cache handling code"),
which replaced pmksa->bssid by &pmksa->bssid while refactoring the code,
without modifying struct cfg80211_pmksa definition.
Replace &pmk[i].bssid with pmk[i].bssid too to make the code clearer,
this change does not affect the semantic.
Fixes: 6c404f34f2bd ("brcmfmac: Cleanup pmksa cache handling code")
Signed-off-by: Nicolas Iooss <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3824,11 +3824,11 @@ brcmf_cfg80211_del_pmksa(struct wiphy *w
if (!check_vif_up(ifp->vif))
return -EIO;
- brcmf_dbg(CONN, "del_pmksa - PMK bssid = %pM\n", &pmksa->bssid);
+ brcmf_dbg(CONN, "del_pmksa - PMK bssid = %pM\n", pmksa->bssid);
npmk = le32_to_cpu(cfg->pmk_list.npmk);
for (i = 0; i < npmk; i++)
- if (!memcmp(&pmksa->bssid, &pmk[i].bssid, ETH_ALEN))
+ if (!memcmp(pmksa->bssid, pmk[i].bssid, ETH_ALEN))
break;
if ((npmk > 0) && (i < npmk)) {
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guilherme G Piccoli <[email protected]>
commit edfc23ee3e0ebbb6713d7574ab1b00abff178f6c upstream.
Although rare, it's possible to hit PCI error early on device
probe, meaning possibly some structs are not entirely initialized,
and some might even be completely uninitialized, leading to NULL
pointer dereference.
The i40e driver currently presents a "bad" behavior if device hits
such early PCI error: firstly, the struct i40e_pf might not be
attached to pci_dev yet, leading to a NULL pointer dereference on
access to pf->state.
Even checking if the struct is NULL and avoiding the access in that
case isn't enough, since the driver cannot recover from PCI error
that early; in our experiments we saw multiple failures on kernel
log, like:
[549.664] i40e 0007:01:00.1: Initial pf_reset failed: -15
[549.664] i40e: probe of 0007:01:00.1 failed with error -15
[...]
[871.644] i40e 0007:01:00.1: The driver for the device stopped because the
device firmware failed to init. Try updating your NVM image.
[871.644] i40e: probe of 0007:01:00.1 failed with error -32
[...]
[872.516] i40e 0007:01:00.0: ARQ: Unknown event 0x0000 ignored
Between the first probe failure (error -15) and the second (error -32)
another PCI error happened due to the first bad probe. Also, driver
started to flood console with those ARQ event messages.
This patch will prevent these issues by allowing error recovery
mechanism to remove the failed device from the system instead of
trying to recover from early PCI errors during device probe.
Signed-off-by: Guilherme G Piccoli <[email protected]>
Acked-by: Jacob Keller <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11415,6 +11415,12 @@ static pci_ers_result_t i40e_pci_error_d
dev_info(&pdev->dev, "%s: error %d\n", __func__, error);
+ if (!pf) {
+ dev_info(&pdev->dev,
+ "Cannot recover - error happened during device probe\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
/* shutdown all operations */
if (!test_bit(__I40E_SUSPENDED, &pf->state)) {
rtnl_lock();
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Marciniszyn <[email protected]>
commit 72f53af2651957b0b9d6dead72a393eaf9a2c3be upstream.
There is a a bug in defered ack stuff that causes a race with the
destroy of a QP.
A packet causes a defered ack to be pended by putting the QP
into an rcd queue.
A return from the driver interrupt processing will process that rcd
queue of QPs and attempt to do a direct send of the ack. At this
point no locks are held and the above QP could now be put in the reset
state in the qp destroy logic. A refcount protects the QP while it
is in the rcd queue so it isn't going anywhere yet.
If the direct send fails to allocate a pio buffer,
hfi1_schedule_send() is called to trigger sending an ack from the
send engine. There is no state test in that code path.
The refcount is then dropped from the driver.c caller
potentially allowing the qp destroy to continue from its
refcount wait in parallel with the workqueue scheduling of the qp.
Reviewed-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/hfi1/rc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/infiniband/hw/hfi1/rc.c
+++ b/drivers/infiniband/hw/hfi1/rc.c
@@ -889,8 +889,10 @@ void hfi1_send_rc_ack(struct hfi1_ctxtda
return;
queue_ack:
- this_cpu_inc(*ibp->rvp.rc_qacks);
spin_lock_irqsave(&qp->s_lock, flags);
+ if (!(ib_rvt_state_ops[qp->state] & RVT_PROCESS_RECV_OK))
+ goto unlock;
+ this_cpu_inc(*ibp->rvp.rc_qacks);
qp->s_flags |= RVT_S_ACK_PENDING | RVT_S_RESP_PENDING;
qp->s_nak_state = qp->r_nak_state;
qp->s_ack_psn = qp->r_ack_psn;
@@ -899,6 +901,7 @@ queue_ack:
/* Schedule the send tasklet. */
hfi1_schedule_send(qp);
+unlock:
spin_unlock_irqrestore(&qp->s_lock, flags);
}
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit a09f99eddef44035ec764075a37bace8181bec38 upstream.
Fuse allowed VFS to set mode in setattr in order to clear suid/sgid on
chown and truncate, and (since writeback_cache) write. The problem with
this is that it'll potentially restore a stale mode.
The poper fix would be to let the filesystems do the suid/sgid clearing on
the relevant operations. Possibly some are already doing it but there's no
way we can detect this.
So fix this by refreshing and recalculating the mode. Do this only if
ATTR_KILL_S[UG]ID is set to not destroy performance for writes. This is
still racy but the size of the window is reduced.
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dir.c | 32 ++++++++++++++++++++++++++++----
1 file changed, 28 insertions(+), 4 deletions(-)
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1701,16 +1701,40 @@ error:
static int fuse_setattr(struct dentry *entry, struct iattr *attr)
{
struct inode *inode = d_inode(entry);
+ struct file *file = (attr->ia_valid & ATTR_FILE) ? attr->ia_file : NULL;
int ret;
if (!fuse_allow_current_process(get_fuse_conn(inode)))
return -EACCES;
- if (attr->ia_valid & ATTR_FILE)
- ret = fuse_do_setattr(inode, attr, attr->ia_file);
- else
- ret = fuse_do_setattr(inode, attr, NULL);
+ if (attr->ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID)) {
+ int kill;
+ attr->ia_valid &= ~(ATTR_KILL_SUID | ATTR_KILL_SGID |
+ ATTR_MODE);
+ /*
+ * ia_mode calculation may have used stale i_mode. Refresh and
+ * recalculate.
+ */
+ ret = fuse_do_getattr(inode, NULL, file);
+ if (ret)
+ return ret;
+
+ attr->ia_mode = inode->i_mode;
+ kill = should_remove_suid(entry);
+ if (kill & ATTR_KILL_SUID) {
+ attr->ia_valid |= ATTR_MODE;
+ attr->ia_mode &= ~S_ISUID;
+ }
+ if (kill & ATTR_KILL_SGID) {
+ attr->ia_valid |= ATTR_MODE;
+ attr->ia_mode &= ~S_ISGID;
+ }
+ }
+ if (!attr->ia_valid)
+ return 0;
+
+ ret = fuse_do_setattr(inode, attr, file);
if (!ret) {
/* Directory mode changed, may need to revalidate access */
if (d_is_dir(entry) && (attr->ia_valid & ATTR_MODE))
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kefeng Wang <[email protected]>
commit e16b46f190a22587898b331f9d58583b0b166c9a upstream.
It should check the data->pclk, not data->clk when get apb_pclk.
Fixes: c8ed99d4f6a8("serial: 8250_dw: Add support for deferred probing")
Signed-off-by: Kefeng Wang <[email protected]>
Tested-by: Andy Shevchenko <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_dw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -462,7 +462,7 @@ static int dw8250_probe(struct platform_
}
data->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
- if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER) {
+ if (IS_ERR(data->pclk) && PTR_ERR(data->pclk) == -EPROBE_DEFER) {
err = -EPROBE_DEFER;
goto err_clk;
}
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcin Wojtas <[email protected]>
commit a0245eb76ad0f652f1eb14f48ca2d3c4391aef66 upstream.
Original commit, which added support for Armada CP110 system controller
used global variables for storing all clock information. It worked
fine for Armada 7k SoC, with single CP110 block. After dual-CP110 Armada 8k
was introduced, the data got overwritten and corrupted.
This patch fixes the issue by allocating resources dynamically in the
driver probe and storing it as platform drvdata.
Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system ...")
Signed-off-by: Marcin Wojtas <[email protected]>
Reviewed-by: Thomas Petazzoni <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/mvebu/cp110-system-controller.c | 29 +++++++++++++++++++---------
1 file changed, 20 insertions(+), 9 deletions(-)
--- a/drivers/clk/mvebu/cp110-system-controller.c
+++ b/drivers/clk/mvebu/cp110-system-controller.c
@@ -81,13 +81,6 @@ enum {
#define CP110_GATE_EIP150 25
#define CP110_GATE_EIP197 26
-static struct clk *cp110_clks[CP110_CLK_NUM];
-
-static struct clk_onecell_data cp110_clk_data = {
- .clks = cp110_clks,
- .clk_num = CP110_CLK_NUM,
-};
-
struct cp110_gate_clk {
struct clk_hw hw;
struct regmap *regmap;
@@ -196,7 +189,8 @@ static int cp110_syscon_clk_probe(struct
struct regmap *regmap;
struct device_node *np = pdev->dev.of_node;
const char *ppv2_name, *apll_name, *core_name, *eip_name, *nand_name;
- struct clk *clk;
+ struct clk_onecell_data *cp110_clk_data;
+ struct clk *clk, **cp110_clks;
u32 nand_clk_ctrl;
int i, ret;
@@ -209,6 +203,20 @@ static int cp110_syscon_clk_probe(struct
if (ret)
return ret;
+ cp110_clks = devm_kcalloc(&pdev->dev, sizeof(struct clk *),
+ CP110_CLK_NUM, GFP_KERNEL);
+ if (!cp110_clks)
+ return -ENOMEM;
+
+ cp110_clk_data = devm_kzalloc(&pdev->dev,
+ sizeof(*cp110_clk_data),
+ GFP_KERNEL);
+ if (!cp110_clk_data)
+ return -ENOMEM;
+
+ cp110_clk_data->clks = cp110_clks;
+ cp110_clk_data->clk_num = CP110_CLK_NUM;
+
/* Register the APLL which is the root of the clk tree */
of_property_read_string_index(np, "core-clock-output-names",
CP110_CORE_APLL, &apll_name);
@@ -336,10 +344,12 @@ static int cp110_syscon_clk_probe(struct
cp110_clks[CP110_MAX_CORE_CLOCKS + i] = clk;
}
- ret = of_clk_add_provider(np, cp110_of_clk_get, &cp110_clk_data);
+ ret = of_clk_add_provider(np, cp110_of_clk_get, cp110_clk_data);
if (ret)
goto fail_clk_add;
+ platform_set_drvdata(pdev, cp110_clks);
+
return 0;
fail_clk_add:
@@ -366,6 +376,7 @@ fail0:
static int cp110_syscon_clk_remove(struct platform_device *pdev)
{
+ struct clk **cp110_clks = platform_get_drvdata(pdev);
int i;
of_clk_del_provider(pdev->dev.of_node);
4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peng Fan <[email protected]>
commit 85714108e673cdebf1b96abfd50fb02a29e37577 upstream.
When dma_common_free_remap, the input parameter 'size' may not
be page aligned. And, met kernel warning when doing iommu dma
for usb on i.MX8 platform:
"
WARNING: CPU: 0 PID: 869 at mm/vmalloc.c:70 vunmap_page_range+0x1cc/0x1d0()
Modules linked in:
CPU: 0 PID: 869 Comm: kworker/u8:2 Not tainted 4.1.12-00444-gc5f9d1d-dirty #147
Hardware name: Freescale i.MX8DV Sabreauto (DT)
Workqueue: ci_otg ci_otg_work
Call trace:
[<ffffffc000089920>] dump_backtrace+0x0/0x124
[<ffffffc000089a54>] show_stack+0x10/0x1c
[<ffffffc0006d1e6c>] dump_stack+0x84/0xc8
[<ffffffc0000b4568>] warn_slowpath_common+0x98/0xd0
[<ffffffc0000b4664>] warn_slowpath_null+0x14/0x20
[<ffffffc000170348>] vunmap_page_range+0x1c8/0x1d0
[<ffffffc000170388>] unmap_kernel_range+0x20/0x88
[<ffffffc000460ad0>] dma_common_free_remap+0x74/0x84
[<ffffffc0000940d8>] __iommu_free_attrs+0x9c/0x178
[<ffffffc0005032bc>] ehci_mem_cleanup+0x140/0x194
[<ffffffc000503548>] ehci_stop+0x8c/0xdc
[<ffffffc0004e8258>] usb_remove_hcd+0xf0/0x1cc
[<ffffffc000516bc0>] host_stop+0x1c/0x58
[<ffffffc000514240>] ci_otg_work+0xdc/0x120
[<ffffffc0000c9c34>] process_one_work+0x134/0x33c
[<ffffffc0000c9f78>] worker_thread+0x13c/0x47c
[<ffffffc0000cf43c>] kthread+0xd8/0xf0
"
For dma_common_pages_remap:
dma_common_pages_remap
|->get_vm_area_caller
|->__get_vm_area_node
|->size = PAGE_ALIGN(size); Round up to page aligned
So, in dma_common_free_remap, we also need a page aligned size,
pass 'PAGE_ALIGN(size)' to unmap_kernel_range.
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/dma-mapping.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/base/dma-mapping.c
+++ b/drivers/base/dma-mapping.c
@@ -334,7 +334,7 @@ void dma_common_free_remap(void *cpu_add
return;
}
- unmap_kernel_range((unsigned long)cpu_addr, size);
+ unmap_kernel_range((unsigned long)cpu_addr, PAGE_ALIGN(size));
vunmap(cpu_addr);
}
#endif
On 10/21/2016 03:17 AM, Greg Kroah-Hartman wrote:
> ----------------------------
> NOTE, this will be the last 4.7.y kernel to be released. After this
> one, the 4.7.y series is end-of-life. You should be moving to the 4.8.y
> kernel series at this point in time.
> ----------------------------
>
> This is the start of the stable review cycle for the 4.7.10 release.
> There are 45 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Oct 23 09:14:13 UTC 2016.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.7.10-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.7.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America(Silicon Valley)
[email protected]
On Fri, Oct 21, 2016 at 11:17:20AM +0200, Greg Kroah-Hartman wrote:
> ----------------------------
> NOTE, this will be the last 4.7.y kernel to be released. After this
> one, the 4.7.y series is end-of-life. You should be moving to the 4.8.y
> kernel series at this point in time.
> ----------------------------
>
> This is the start of the stable review cycle for the 4.7.10 release.
> There are 45 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Oct 23 09:14:13 UTC 2016.
> Anything received after that time might be too late.
>
Build results:
total: 149 pass: 149 fail: 0
Qemu test results:
total: 110 pass: 110 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
On Fri, Oct 21, 2016 at 12:07:49PM -0700, Kevin Hilman wrote:
> kernelci.org bot <[email protected]> writes:
>
> > stable-rc boot: 85 boots: 1 failed, 81 passed with 3 offline (v4.7.9-45-g92598889131d)
> >
> > Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/kernel/v4.7.9-45-g92598889131d/
> > Full Build Summary: https://kernelci.org/build/stable-rc/kernel/v4.7.9-45-g92598889131d/
> >
> > Tree: stable-rc
> > Branch: local/linux-4.7.y
> > Git Describe: v4.7.9-45-g92598889131d
> > Git Commit: 92598889131d1d15d29fd6572ce4bbf6cc4651a5
> > Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > Tested: 20 unique boards, 10 SoC families, 22 builds out of 147
> >
> > Boot Failure Detected: https://kernelci.org/boot/?v4.7.9-45-g92598889131d&fail
> >
> > arm:
> >
> > mxs_defconfig:
> > imx23-olinuxino: 1 failed lab
>
> Interpretation: all good!
>
> This board is having some serial port input overruns that under
> investigation (and not new)
Ah good, thanks for interpreting it.
greg k-h