Add entries to the list of imx8mm boards denoting
the Emtop SOM from Emtop.
Signed-off-by: Himanshu Bhavani <[email protected]>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 442ce8f4d675..06eb2c790f90 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -884,6 +884,7 @@ properties:
- beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
- boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board
- dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC
+ - emtop,imx8mm-emtop # i.MX8MM Emtop SoM
- emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
- fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board
- fsl,imx8mm-evk # i.MX8MM EVK Board
--
2.25.1
On 5/10/23 10:33, Himanshu Bhavani wrote:
> Add entries to the list of imx8mm boards denoting
> the Emtop SOM from Emtop.
>
> Signed-off-by: Himanshu Bhavani <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 442ce8f4d675..06eb2c790f90 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -884,6 +884,7 @@ properties:
> - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
> - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board
> - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC
> + - emtop,imx8mm-emtop # i.MX8MM Emtop SoM
The pictures I could find via internet search engine make it look like
the name of the SoM is
SOM-IMX8MMLPD4
or similar. That silkscreen label is right below the EMTOP logo.
Can you please check that on your module ?
On 5/10/23 11:13, Himanshu Bhavani wrote:
> Hi Marek Vasut
Hi,
> Yes, it is SOM-IMX8MMLPD4.
In that case, have a look at e.g. this "dh,imx8mp" system. That's also a
SoM and a carrier board (PDK3). Notice the structure, where both carrier
board compatible and SoM compatible and imx8mp compatible are listed in
the DT. I suspect you want to reproduce the same -- include both SoM and
carrier board compatible string.