From: Wenchao Chen <[email protected]>
This patch introduces host->fua_disable for MMC host controller.
The host can turn off FUA to improve performance.
1. fua_disable = 1
/sys/block/mmcblk0/queue # cat fua 0
I tested 5 times for each case and output a average speed.
1) Sequential read:
Speed: 266.8MiB/s, 265.1MiB/s, 262.9MiB/s, 268.7MiB/s, 265.2MiB/s
Average speed: 265.74MiB/s
2) Random read:
Speed: 98.75MiB/s, 98.7MiB/s, 98.5MiB/s, 99.4MiB/s, 98.7MiB/s
Average speed: 98.81MiB/s
3) Sequential write:
Speed: 199.94MiB/s, 199.1MiB/s, 205.5MiB/s, 206.5MiB/s, 191.5MiB/s
Average speed: 200.5MiB/s
4) Random write:
Speed: 68.6MiB/s, 71.8MiB/s, 77.1MiB/s, 64.8MiB/s, 69.3MiB/s
Average speed: 70.32MiB/s
2. fua_disable = 0 (default 0)
/sys/block/mmcblk0/queue # cat fua 1
I tested 5 times for each case and output a average speed.
1) Sequential read:
Speed: 259.3MiB/s, 258.8MiB/s, 258.2MiB/s, 259.5MiB/s, 253.5MiB/s
Average speed: 257.86MiB/s
2) Random read:
Speed: 98.9MiB/s, 101MiB/s, 101MiB/s, 99MiB/s, 101.1MiB/s
Average speed: 100.2MiB/s
3) Sequential write:
Speed: 153.7MiB/s, 146.2MiB/s, 151.2MiB/s, 148.8MiB/s, 147.5MiB/s
Average speed: 149.48MiB/s
4) Random write:
Speed: 12.9MiB/s, 12.3MiB/s, 12.6MiB/s, 12.8MiB/s, 12.8MiB/s
Average speed: 12.68MiB/s
According to the above data, disable FUA (fua_disable = 1) improves the
performance. Therefore, it is recommended to support the host to control
FUA.
Signed-off-by: Wenchao Chen <[email protected]>
---
drivers/mmc/core/block.c | 3 ++-
include/linux/mmc/host.h | 3 +++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 54cd009aee50..333e819e077a 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -2490,7 +2490,8 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) ||
card->ext_csd.rel_sectors)) {
md->flags |= MMC_BLK_REL_WR;
- fua_enabled = true;
+ if (!card->host->fua_disable)
+ fua_enabled = true;
cache_enabled = true;
}
if (mmc_cache_enabled(card->host))
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 8fdd3cf971a3..16a5bee3eeae 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -517,6 +517,9 @@ struct mmc_host {
struct blk_crypto_profile crypto_profile;
#endif
+ /* Host FUA support */
+ bool fua_disable;
+
/* Host Software Queue support */
bool hsq_enabled;
--
2.17.1
On 10/19/22 19:45, Wenchao Chen wrote:
> From: Wenchao Chen <[email protected]>
>
> This patch introduces host->fua_disable for MMC host controller.
> The host can turn off FUA to improve performance.
>
> 1. fua_disable = 1
> /sys/block/mmcblk0/queue # cat fua 0
> I tested 5 times for each case and output a average speed.
>
> 1) Sequential read:
> Speed: 266.8MiB/s, 265.1MiB/s, 262.9MiB/s, 268.7MiB/s, 265.2MiB/s
> Average speed: 265.74MiB/s
>
> 2) Random read:
> Speed: 98.75MiB/s, 98.7MiB/s, 98.5MiB/s, 99.4MiB/s, 98.7MiB/s
> Average speed: 98.81MiB/s
>
> 3) Sequential write:
> Speed: 199.94MiB/s, 199.1MiB/s, 205.5MiB/s, 206.5MiB/s, 191.5MiB/s
> Average speed: 200.5MiB/s
>
> 4) Random write:
> Speed: 68.6MiB/s, 71.8MiB/s, 77.1MiB/s, 64.8MiB/s, 69.3MiB/s
> Average speed: 70.32MiB/s
>
> 2. fua_disable = 0 (default 0)
> /sys/block/mmcblk0/queue # cat fua 1
> I tested 5 times for each case and output a average speed.
>
> 1) Sequential read:
> Speed: 259.3MiB/s, 258.8MiB/s, 258.2MiB/s, 259.5MiB/s, 253.5MiB/s
> Average speed: 257.86MiB/s
>
> 2) Random read:
> Speed: 98.9MiB/s, 101MiB/s, 101MiB/s, 99MiB/s, 101.1MiB/s
> Average speed: 100.2MiB/s
>
> 3) Sequential write:
> Speed: 153.7MiB/s, 146.2MiB/s, 151.2MiB/s, 148.8MiB/s, 147.5MiB/s
> Average speed: 149.48MiB/s
>
> 4) Random write:
> Speed: 12.9MiB/s, 12.3MiB/s, 12.6MiB/s, 12.8MiB/s, 12.8MiB/s
> Average speed: 12.68MiB/s
>
> According to the above data, disable FUA (fua_disable = 1) improves the
> performance. Therefore, it is recommended to support the host to control
> FUA.
>
> Signed-off-by: Wenchao Chen <[email protected]>
Based on the data provided seems it does increase the performance.
Perhaps it is worth mentioning the reason behind the performance
increase and other side effects of doing so ?
Also, it is usually helpful to mention performance increase in the
% in the commit log so you can move verbose log (like above) into
the cover-letter for documentation purpose, this is based on
the feedback I got, unless maintainer(s) prefers is this way :).
-ck
On Thu, Oct 20, 2022 at 11:07 AM Chaitanya Kulkarni
<[email protected]> wrote:
>
> On 10/19/22 19:45, Wenchao Chen wrote:
> > From: Wenchao Chen <[email protected]>
> >
> > This patch introduces host->fua_disable for MMC host controller.
> > The host can turn off FUA to improve performance.
> >
> > 1. fua_disable = 1
> > /sys/block/mmcblk0/queue # cat fua 0
> > I tested 5 times for each case and output a average speed.
> >
> > 1) Sequential read:
> > Speed: 266.8MiB/s, 265.1MiB/s, 262.9MiB/s, 268.7MiB/s, 265.2MiB/s
> > Average speed: 265.74MiB/s
> >
> > 2) Random read:
> > Speed: 98.75MiB/s, 98.7MiB/s, 98.5MiB/s, 99.4MiB/s, 98.7MiB/s
> > Average speed: 98.81MiB/s
> >
> > 3) Sequential write:
> > Speed: 199.94MiB/s, 199.1MiB/s, 205.5MiB/s, 206.5MiB/s, 191.5MiB/s
> > Average speed: 200.5MiB/s
> >
> > 4) Random write:
> > Speed: 68.6MiB/s, 71.8MiB/s, 77.1MiB/s, 64.8MiB/s, 69.3MiB/s
> > Average speed: 70.32MiB/s
> >
> > 2. fua_disable = 0 (default 0)
> > /sys/block/mmcblk0/queue # cat fua 1
> > I tested 5 times for each case and output a average speed.
> >
> > 1) Sequential read:
> > Speed: 259.3MiB/s, 258.8MiB/s, 258.2MiB/s, 259.5MiB/s, 253.5MiB/s
> > Average speed: 257.86MiB/s
> >
> > 2) Random read:
> > Speed: 98.9MiB/s, 101MiB/s, 101MiB/s, 99MiB/s, 101.1MiB/s
> > Average speed: 100.2MiB/s
> >
> > 3) Sequential write:
> > Speed: 153.7MiB/s, 146.2MiB/s, 151.2MiB/s, 148.8MiB/s, 147.5MiB/s
> > Average speed: 149.48MiB/s
> >
> > 4) Random write:
> > Speed: 12.9MiB/s, 12.3MiB/s, 12.6MiB/s, 12.8MiB/s, 12.8MiB/s
> > Average speed: 12.68MiB/s
> >
> > According to the above data, disable FUA (fua_disable = 1) improves the
> > performance. Therefore, it is recommended to support the host to control
> > FUA.
> >
> > Signed-off-by: Wenchao Chen <[email protected]>
>
> Based on the data provided seems it does increase the performance.
> Perhaps it is worth mentioning the reason behind the performance
> increase and other side effects of doing so ?
We suspect it will affect the progressive power-down test, but after a week
of testing, turning off FUA did not affect this test.
>
> Also, it is usually helpful to mention performance increase in the
> % in the commit log so you can move verbose log (like above) into
> the cover-letter for documentation purpose, this is based on
> the feedback I got, unless maintainer(s) prefers is this way :).
>
> -ck
>
Thank you very much for your suggestion, I will update it in the next version.
On Thu, Oct 20, 2022 at 3:44 PM Avri Altman <[email protected]> wrote:
>
> > According to the above data, disable FUA (fua_disable = 1) improves the
> > performance. Therefore, it is recommended to support the host to control
> > FUA.
> >
> > Signed-off-by: Wenchao Chen <[email protected]>
> > ---
> > drivers/mmc/core/block.c | 3 ++-
> > include/linux/mmc/host.h | 3 +++
> > 2 files changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index
> > 54cd009aee50..333e819e077a 100644
> > --- a/drivers/mmc/core/block.c
> > +++ b/drivers/mmc/core/block.c
> > @@ -2490,7 +2490,8 @@ static struct mmc_blk_data
> > *mmc_blk_alloc_req(struct mmc_card *card,
> > ((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) ||
> > card->ext_csd.rel_sectors)) {
> > md->flags |= MMC_BLK_REL_WR;
> > - fua_enabled = true;
> > + if (!card->host->fua_disable)
> > + fua_enabled = true;
> Where are you allowing to set fua_disable?
> And then I would expect you to call blk_queue_flag_set to set QUEUE_FLAG_FUA.
>
> Thanks,
> Avri
Hi Avri
We will implement sdhci_sprd_probe in sdhci-sprd.c host->fua_disable = true;
Because sdhci_sprd_probe is before mmc_blk_alloc_req, calling blk_queue_flag_set
directly will also be updated.
Thanks,
Wenchao
>
> > cache_enabled = true;
> > }
> > if (mmc_cache_enabled(card->host)) diff --git
> > a/include/linux/mmc/host.h b/include/linux/mmc/host.h index
> > 8fdd3cf971a3..16a5bee3eeae 100644
> > --- a/include/linux/mmc/host.h
> > +++ b/include/linux/mmc/host.h
> > @@ -517,6 +517,9 @@ struct mmc_host {
> > struct blk_crypto_profile crypto_profile; #endif
> >
> > + /* Host FUA support */
> > + bool fua_disable;
> > +
> > /* Host Software Queue support */
> > bool hsq_enabled;
> >
> > --
> > 2.17.1
>