2022-09-22 16:15:25

by Johannes Zink

[permalink] [raw]
Subject: PROBLEM: Segfault in kconfig

Hi everyone,

[1.] One line summary of the problem:
kconfig crashes with segfault under rare circumstances
[2.] Full description of the problem/report:
Under certain circumstances jump keys are displayed on the search 
results even if a symbol is deactivated by one of its 
dependencies. Using the jump keys then triggers a segmentation
fault due to a NULL dereference. Perform the following steps to 
trigger the issue

1.: ARCH=arm64 make defconfig
2.: ARCH=arm64 make menuconfig

3.: press '/' key to search for the string "EFI". Use jump key 
(1) to jump to search result. Press 'n' key to deactivate the 
entry. 
4.: press '/' to seach for the string "ACPI". Use the jump key 
(1) to jump to the search result. 

Menuconfig then crashes with a segfault.

[3.] Keywords (i.e., modules, networking, kernel):
kconfig, mconf
[4.] Kernel information
[4.1.] Kernel version (from /proc/version):
v6.0.0-rc6
[4.2.] Kernel .config file:
arm64 default defconfig
[5.] Most recent kernel version which did not have the bug:
v5.15
[6.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/admin-guide/bug-hunting.rst):
not applicable
[7.] A small shell script or example program which triggers the
problem (if possible):
not applicable, please see description in [2.]
[8.] Environment
[8.1.] Software (add the output of the ver_linux script here):
not applicable
[8.2.] Processor information (from /proc/cpuinfo):
not applicable
[8.3.] Module information (from /proc/modules):
not applicable
[8.4.] Loaded driver and hardware information (/proc/ioports,
/proc/iomem):
not applicable
[8.5.] PCI information ('lspci -vvv' as root):
not applicable
[8.6.] SCSI information (from /proc/scsi/scsi):
not applicable
[8.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
not applicable
[X.] Other notes, patches, fixes, workarounds:

I found that the attached patch is a very hacky workaround to 
keep menuconfig from crashing, but I am pretty sure the jump 
keys should not have be activated for unaccessable entries in the
first place. I found it quite hard to find the corresponding part
in mconf, which is why I decided to send this bugreport instead 
of sending a patch. Maybe someone on this list either knows mconf 
really well and can just fix it, or guide me to where I can dig 
around (though in that case I could really use some help on how 
to debug menuconfig, since I found it challenging to get it 
working with gdb)

Best regards
Johannes

---
scripts/kconfig/mconf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 9d3cf510562f..60a82f701bd3 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -447,7 +447,8 @@ static void search_conf(void)
again = false;
for (i = 0; i < JUMP_NB && keys[i]; i++)
if (dres == keys[i]) {
- conf(targets[i]->parent, targets[i]);
+ if (targets[i]->parent)
+ conf(targets[i]->parent,
targets[i]);
again = true;
}
str_free(&res);

--
Pengutronix e.K. | Johannes Zink |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686| Fax: +49-5121-206917-5555 |


2022-10-06 13:44:39

by Johannes Zink

[permalink] [raw]
Subject: Re: PROBLEM: Segfault in kconfig

Hi everyone,

On Thu, 2022-09-22 at 18:01 +0200, Johannes Zink wrote:
> Hi everyone,
>
> [1.] One line summary of the problem:
>      kconfig crashes with segfault under rare circumstances
> [2.] Full description of the problem/report:
>      Under certain circumstances jump keys are displayed on the
> search 
>      results even if a symbol is deactivated by one of its 
>      dependencies. Using the jump keys then triggers a segmentation
>      fault due to a NULL dereference. Perform the following steps to 
>      trigger the issue
>     
>      1.: ARCH=arm64 make defconfig
>      2.: ARCH=arm64 make menuconfig
>
>      3.: press '/' key to search for the string "EFI". Use jump key 
>          (1) to jump to search result. Press 'n' key to deactivate
> the 
>          entry. 
>      4.: press '/' to seach for the string "ACPI". Use the jump key 
>          (1) to jump to the search result. 
>
>      Menuconfig then crashes with a segfault.
>    
> [3.] Keywords (i.e., modules, networking, kernel):
>      kconfig, mconf
> [4.] Kernel information
> [4.1.] Kernel version (from /proc/version):
>        v6.0.0-rc6
> [4.2.] Kernel .config file:
>        arm64 default defconfig
> [5.] Most recent kernel version which did not have the bug:
>      v5.15
> [6.] Output of Oops.. message (if applicable) with symbolic
> information
>      resolved (see Documentation/admin-guide/bug-hunting.rst):
>      not applicable
> [7.] A small shell script or example program which triggers the
>      problem (if possible):
>      not applicable, please see description in [2.]
> [8.] Environment
> [8.1.] Software (add the output of the ver_linux script here):
>        not applicable
> [8.2.] Processor information (from /proc/cpuinfo):
>        not applicable
> [8.3.] Module information (from /proc/modules):
>        not applicable
> [8.4.] Loaded driver and hardware information (/proc/ioports,
> /proc/iomem):
>        not applicable
> [8.5.] PCI information ('lspci -vvv' as root):
>        not applicable
> [8.6.] SCSI information (from /proc/scsi/scsi):
>        not applicable
> [8.7.] Other information that might be relevant to the problem
>        (please look in /proc and include all information that you
>        think to be relevant):
>        not applicable
> [X.] Other notes, patches, fixes, workarounds:
>    
>      I found that the attached patch is a very hacky workaround to 
>      keep menuconfig from crashing, but I am pretty sure the jump 
>      keys should not have be activated for unaccessable entries in
> the
>      first place. I found it quite hard to find the corresponding
> part
>      in mconf, which is why I decided to send this bugreport instead 
>      of sending a patch. Maybe someone on this list either knows
> mconf 
>      really well and can just fix it, or guide me to where I can dig 
>      around (though in that case I could really use some help on how 
>      to debug menuconfig, since I found it challenging to get it 
>      working with gdb)
>     
> Best regards
> Johannes
>
> ---
> scripts/kconfig/mconf.c | 3 ++-                                      
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c       
> index 9d3cf510562f..60a82f701bd3 100644                              
> --- a/scripts/kconfig/mconf.c                                        
> +++ b/scripts/kconfig/mconf.c                                        
> @@ -447,7 +447,8 @@ static void search_conf(void)                    
>                 again = false;
>                 for (i = 0; i < JUMP_NB && keys[i]; i++)
>                         if (dres == keys[i]) {
> -                               conf(targets[i]->parent, targets[i]);
> +                               if (targets[i]->parent)              
> +                                       conf(targets[i]->parent,
> targets[i]);
>                                 again = true;
>                         }
>                 str_free(&res);
>

Just a gentle ping and TL;DR on this issue:

Menuconfig crashes with a segfault if performing the steps

1.: ARCH=arm64 make defconfig
2.: ARCH=arm64 make menuconfig
3.: press '/' key to search for the string "EFI". Use jump key
(1) to jump to search result. Press 'n' key to deactivate
the entry.
4.: press '/' to seach for the string "ACPI". Use the jump key
(1) to jump to the search result.

For more details please see the detailed report in the original
message.

Has anyone any input on this?

Best regards

--
Pengutronix e.K. | Johannes Zink |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686| Fax: +49-5121-206917-5555 |

2022-10-23 19:44:13

by Masahiro Yamada

[permalink] [raw]
Subject: Re: PROBLEM: Segfault in kconfig

Hi Johannes,


Sorry for the delay.

I took a closer look at this.


I submitted a patch, which I think is a more correct fix.

https://patchwork.kernel.org/project/linux-kbuild/patch/[email protected]/



Thanks.


On Thu, Oct 6, 2022 at 10:15 PM Johannes Zink <[email protected]> wrote:
>
> Hi everyone,
>
> On Thu, 2022-09-22 at 18:01 +0200, Johannes Zink wrote:
> > Hi everyone,
> >
> > [1.] One line summary of the problem:
> > kconfig crashes with segfault under rare circumstances
> > [2.] Full description of the problem/report:
> > Under certain circumstances jump keys are displayed on the
> > search
> > results even if a symbol is deactivated by one of its
> > dependencies. Using the jump keys then triggers a segmentation
> > fault due to a NULL dereference. Perform the following steps to
> > trigger the issue
> >
> > 1.: ARCH=arm64 make defconfig
> > 2.: ARCH=arm64 make menuconfig
> >
> > 3.: press '/' key to search for the string "EFI". Use jump key
> > (1) to jump to search result. Press 'n' key to deactivate
> > the
> > entry.
> > 4.: press '/' to seach for the string "ACPI". Use the jump key
> > (1) to jump to the search result.
> >
> > Menuconfig then crashes with a segfault.
> >
> > [3.] Keywords (i.e., modules, networking, kernel):
> > kconfig, mconf
> > [4.] Kernel information
> > [4.1.] Kernel version (from /proc/version):
> > v6.0.0-rc6
> > [4.2.] Kernel .config file:
> > arm64 default defconfig
> > [5.] Most recent kernel version which did not have the bug:
> > v5.15
> > [6.] Output of Oops.. message (if applicable) with symbolic
> > information
> > resolved (see Documentation/admin-guide/bug-hunting.rst):
> > not applicable
> > [7.] A small shell script or example program which triggers the
> > problem (if possible):
> > not applicable, please see description in [2.]
> > [8.] Environment
> > [8.1.] Software (add the output of the ver_linux script here):
> > not applicable
> > [8.2.] Processor information (from /proc/cpuinfo):
> > not applicable
> > [8.3.] Module information (from /proc/modules):
> > not applicable
> > [8.4.] Loaded driver and hardware information (/proc/ioports,
> > /proc/iomem):
> > not applicable
> > [8.5.] PCI information ('lspci -vvv' as root):
> > not applicable
> > [8.6.] SCSI information (from /proc/scsi/scsi):
> > not applicable
> > [8.7.] Other information that might be relevant to the problem
> > (please look in /proc and include all information that you
> > think to be relevant):
> > not applicable
> > [X.] Other notes, patches, fixes, workarounds:
> >
> > I found that the attached patch is a very hacky workaround to
> > keep menuconfig from crashing, but I am pretty sure the jump
> > keys should not have be activated for unaccessable entries in
> > the
> > first place. I found it quite hard to find the corresponding
> > part
> > in mconf, which is why I decided to send this bugreport instead
> > of sending a patch. Maybe someone on this list either knows
> > mconf
> > really well and can just fix it, or guide me to where I can dig
> > around (though in that case I could really use some help on how
> > to debug menuconfig, since I found it challenging to get it
> > working with gdb)
> >
> > Best regards
> > Johannes
> >
> > ---
> > scripts/kconfig/mconf.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
> > index 9d3cf510562f..60a82f701bd3 100644
> > --- a/scripts/kconfig/mconf.c
> > +++ b/scripts/kconfig/mconf.c
> > @@ -447,7 +447,8 @@ static void search_conf(void)
> > again = false;
> > for (i = 0; i < JUMP_NB && keys[i]; i++)
> > if (dres == keys[i]) {
> > - conf(targets[i]->parent, targets[i]);
> > + if (targets[i]->parent)
> > + conf(targets[i]->parent,
> > targets[i]);
> > again = true;
> > }
> > str_free(&res);
> >
>
> Just a gentle ping and TL;DR on this issue:
>
> Menuconfig crashes with a segfault if performing the steps
>
> 1.: ARCH=arm64 make defconfig
> 2.: ARCH=arm64 make menuconfig
> 3.: press '/' key to search for the string "EFI". Use jump key
> (1) to jump to search result. Press 'n' key to deactivate
> the entry.
> 4.: press '/' to seach for the string "ACPI". Use the jump key
> (1) to jump to the search result.
>
> For more details please see the detailed report in the original
> message.
>
> Has anyone any input on this?
>
> Best regards
>
> --
> Pengutronix e.K. | Johannes Zink |
> Steuerwalder Str. 21 | https://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686| Fax: +49-5121-206917-5555 |
>


--
Best Regards
Masahiro Yamada

2022-10-25 09:09:35

by Johannes Zink

[permalink] [raw]
Subject: Re: PROBLEM: Segfault in kconfig

Hi Masahiro, 

thank you for looking into the issue. I will check out your patch as
soon as I return from netdevconf next week and test it.

Best regards
Johannes

On Mon, 2022-10-24 at 04:23 +0900, Masahiro Yamada wrote:
> Hi Johannes,
>
>
> Sorry for the delay.
>
> I took a closer look at this.
>
>
> I submitted a patch, which I think is a more correct fix.
>
> https://patchwork.kernel.org/project/linux-kbuild/patch/[email protected]/
>
>
>
> Thanks.
>
>
> On Thu, Oct 6, 2022 at 10:15 PM Johannes Zink <[email protected]>
> wrote:
> >
> > Hi everyone,
> >
> > On Thu, 2022-09-22 at 18:01 +0200, Johannes Zink wrote:
> > > Hi everyone,
> > >
> > > [1.] One line summary of the problem:
> > >      kconfig crashes with segfault under rare circumstances
> > > [2.] Full description of the problem/report:
> > >      Under certain circumstances jump keys are displayed on the
> > > search
> > >      results even if a symbol is deactivated by one of its
> > >      dependencies. Using the jump keys then triggers a
> > > segmentation
> > >      fault due to a NULL dereference. Perform the following steps
> > > to
> > >      trigger the issue
> > >
> > >      1.: ARCH=arm64 make defconfig
> > >      2.: ARCH=arm64 make menuconfig
> > >
> > >      3.: press '/' key to search for the string "EFI". Use jump
> > > key
> > >          (1) to jump to search result. Press 'n' key to
> > > deactivate
> > > the
> > >          entry.
> > >      4.: press '/' to seach for the string "ACPI". Use the jump
> > > key
> > >          (1) to jump to the search result.
> > >
> > >      Menuconfig then crashes with a segfault.
> > >
> > > [3.] Keywords (i.e., modules, networking, kernel):
> > >      kconfig, mconf
> > > [4.] Kernel information
> > > [4.1.] Kernel version (from /proc/version):
> > >        v6.0.0-rc6
> > > [4.2.] Kernel .config file:
> > >        arm64 default defconfig
> > > [5.] Most recent kernel version which did not have the bug:
> > >      v5.15
> > > [6.] Output of Oops.. message (if applicable) with symbolic
> > > information
> > >      resolved (see Documentation/admin-guide/bug-hunting.rst):
> > >      not applicable
> > > [7.] A small shell script or example program which triggers the
> > >      problem (if possible):
> > >      not applicable, please see description in [2.]
> > > [8.] Environment
> > > [8.1.] Software (add the output of the ver_linux script here):
> > >        not applicable
> > > [8.2.] Processor information (from /proc/cpuinfo):
> > >        not applicable
> > > [8.3.] Module information (from /proc/modules):
> > >        not applicable
> > > [8.4.] Loaded driver and hardware information (/proc/ioports,
> > > /proc/iomem):
> > >        not applicable
> > > [8.5.] PCI information ('lspci -vvv' as root):
> > >        not applicable
> > > [8.6.] SCSI information (from /proc/scsi/scsi):
> > >        not applicable
> > > [8.7.] Other information that might be relevant to the problem
> > >        (please look in /proc and include all information that you
> > >        think to be relevant):
> > >        not applicable
> > > [X.] Other notes, patches, fixes, workarounds:
> > >
> > >      I found that the attached patch is a very hacky workaround
> > > to
> > >      keep menuconfig from crashing, but I am pretty sure the jump
> > >      keys should not have be activated for unaccessable entries
> > > in
> > > the
> > >      first place. I found it quite hard to find the corresponding
> > > part
> > >      in mconf, which is why I decided to send this bugreport
> > > instead
> > >      of sending a patch. Maybe someone on this list either knows
> > > mconf
> > >      really well and can just fix it, or guide me to where I can
> > > dig
> > >      around (though in that case I could really use some help on
> > > how
> > >      to debug menuconfig, since I found it challenging to get it
> > >      working with gdb)
> > >
> > > Best regards
> > > Johannes
> > >
> > > ---
> > > scripts/kconfig/mconf.c | 3 ++-
> > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
> > > index 9d3cf510562f..60a82f701bd3 100644
> > > --- a/scripts/kconfig/mconf.c
> > > +++ b/scripts/kconfig/mconf.c
> > > @@ -447,7 +447,8 @@ static void search_conf(void)
> > >                 again = false;
> > >                 for (i = 0; i < JUMP_NB && keys[i]; i++)
> > >                         if (dres == keys[i]) {
> > > -                               conf(targets[i]->parent,
> > > targets[i]);
> > > +                               if (targets[i]->parent)
> > > +                                       conf(targets[i]->parent,
> > > targets[i]);
> > >                                 again = true;
> > >                         }
> > >                 str_free(&res);
> > >
> >
> > Just a gentle ping and TL;DR on this issue:
> >
> > Menuconfig crashes with a segfault if performing the steps
> >
> > 1.: ARCH=arm64 make defconfig
> > 2.: ARCH=arm64 make menuconfig
> > 3.: press '/' key to search for the string "EFI". Use jump key
> >     (1) to jump to search result. Press 'n' key to deactivate
> >     the entry.
> > 4.: press '/' to seach for the string "ACPI". Use the jump key
> >     (1) to jump to the search result.
> >
> > For more details please see the detailed report in the original
> > message.
> >
> > Has anyone any input on this?
> >
> > Best regards
> >
> > --
> > Pengutronix e.K.                | Johannes Zink                  |
> > Steuerwalder Str. 21            | https://www.pengutronix.de/    |
> > 31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
> > Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |
> >
>
>

--
Pengutronix e.K. | Johannes Zink |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686| Fax: +49-5121-206917-5555 |