This series of patches is a fixup for the multiqueue support patch.
The first patch fixes a bug introduced by the multiqueue support patch.
The second one doesn't fix a bug but simplify the source code by removing
useless calls to devm_free_irq() since we use managed device resources for
IRQs.
They were applied on the net-next tree and tested with a sama5d36ek board.
Cyrille Pitchen (2):
net/macb: fix misplaced call of free_netdev() in macb_remove()
net/macb: remove useless calls of devm_free_irq()
drivers/net/ethernet/cadence/macb.c | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
--
1.8.2.2
fix a bug introduced by the multiqueue support patch:
"net/macb: add TX multiqueue support for gem"
the "bp" pointer to the netdev private data was dereferenced and used after the
associated memory had been freed by calling free_netdev().
Signed-off-by: Cyrille Pitchen <[email protected]>
---
drivers/net/ethernet/cadence/macb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 0987d2a..81f317f 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -2408,11 +2408,11 @@ static int __exit macb_remove(struct platform_device *pdev)
queue = bp->queues;
for (q = 0; q < bp->num_queues; ++q, ++queue)
devm_free_irq(&pdev->dev, queue->irq, queue);
- free_netdev(dev);
if (!IS_ERR(bp->tx_clk))
clk_disable_unprepare(bp->tx_clk);
clk_disable_unprepare(bp->hclk);
clk_disable_unprepare(bp->pclk);
+ free_netdev(dev);
}
return 0;
--
1.8.2.2
Inside macb_probe(), when devm_request_irq() fails on queue q, there is no need
to call devm_free_irq() on queues 0..q-1 because the managed device resources
are released later when calling free_netdev().
Also removing devm_free_irq() call from macb_remove() for the same reason.
Signed-off-by: Cyrille Pitchen <[email protected]>
---
drivers/net/ethernet/cadence/macb.c | 23 ++++++++---------------
1 file changed, 8 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 81f317f..414f796 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -2160,7 +2160,7 @@ static int __init macb_probe(struct platform_device *pdev)
int err = -ENXIO;
const char *mac;
void __iomem *mem;
- unsigned int hw_q, queue_mask, q, num_queues, q_irq = 0;
+ unsigned int hw_q, queue_mask, q, num_queues;
struct clk *pclk, *hclk, *tx_clk;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -2235,11 +2235,11 @@ static int __init macb_probe(struct platform_device *pdev)
* register mapping but we don't want to test the queue index then
* compute the corresponding register offset at run time.
*/
- for (hw_q = 0; hw_q < MACB_MAX_QUEUES; ++hw_q) {
+ for (hw_q = 0, q = 0; hw_q < MACB_MAX_QUEUES; ++hw_q) {
if (!(queue_mask & (1 << hw_q)))
continue;
- queue = &bp->queues[q_irq];
+ queue = &bp->queues[q];
queue->bp = bp;
if (hw_q) {
queue->ISR = GEM_ISR(hw_q - 1);
@@ -2261,18 +2261,18 @@ static int __init macb_probe(struct platform_device *pdev)
* must remove the optional gaps that could exist in the
* hardware queue mask.
*/
- queue->irq = platform_get_irq(pdev, q_irq);
+ queue->irq = platform_get_irq(pdev, q);
err = devm_request_irq(&pdev->dev, queue->irq, macb_interrupt,
0, dev->name, queue);
if (err) {
dev_err(&pdev->dev,
"Unable to request IRQ %d (error %d)\n",
queue->irq, err);
- goto err_out_free_irq;
+ goto err_out_free_netdev;
}
INIT_WORK(&queue->tx_error_task, macb_tx_error_task);
- q_irq++;
+ q++;
}
dev->irq = bp->queues[0].irq;
@@ -2350,7 +2350,7 @@ static int __init macb_probe(struct platform_device *pdev)
err = register_netdev(dev);
if (err) {
dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
- goto err_out_free_irq;
+ goto err_out_free_netdev;
}
err = macb_mii_init(bp);
@@ -2373,9 +2373,7 @@ static int __init macb_probe(struct platform_device *pdev)
err_out_unregister_netdev:
unregister_netdev(dev);
-err_out_free_irq:
- for (q = 0, queue = bp->queues; q < q_irq; ++q, ++queue)
- devm_free_irq(&pdev->dev, queue->irq, queue);
+err_out_free_netdev:
free_netdev(dev);
err_out_disable_clocks:
if (!IS_ERR(tx_clk))
@@ -2392,8 +2390,6 @@ static int __exit macb_remove(struct platform_device *pdev)
{
struct net_device *dev;
struct macb *bp;
- struct macb_queue *queue;
- unsigned int q;
dev = platform_get_drvdata(pdev);
@@ -2405,9 +2401,6 @@ static int __exit macb_remove(struct platform_device *pdev)
kfree(bp->mii_bus->irq);
mdiobus_free(bp->mii_bus);
unregister_netdev(dev);
- queue = bp->queues;
- for (q = 0; q < bp->num_queues; ++q, ++queue)
- devm_free_irq(&pdev->dev, queue->irq, queue);
if (!IS_ERR(bp->tx_clk))
clk_disable_unprepare(bp->tx_clk);
clk_disable_unprepare(bp->hclk);
--
1.8.2.2
From: Cyrille Pitchen <[email protected]>
Date: Mon, 15 Dec 2014 15:13:30 +0100
> This series of patches is a fixup for the multiqueue support patch.
>
> The first patch fixes a bug introduced by the multiqueue support patch.
> The second one doesn't fix a bug but simplify the source code by removing
> useless calls to devm_free_irq() since we use managed device resources for
> IRQs.
>
> They were applied on the net-next tree and tested with a sama5d36ek board.
Series applied, thanks.