Hello Stas,
Ping on the below?
Cheers,
Michael
On 10/30/2017 01:38 PM, Michael Kerrisk (man-pages) wrote:
> On 05/24/2017 10:12 PM, Stas Sergeev wrote:
>> Hello,
>>
>> 24.05.2017 14:09, Michael Kerrisk (man-pages) пишет:
>>>> Could you please point and cite the spec that says
>>>> exactly this?
>>> I take your point: the text of the spec could be more precise. It
>>> does not provide a complete support for my assertion.
>>>
>>> But, I do think the interpretation I suggest is the more natural one,
>>> for many reasons:
>> Note: below I am not arguing to whether it is
>> good or bad to use SS_ONSTACK. This question
>> is closed as soon as you pointed to EINVAL in
>> other OSes (it doesn't make it bad immediately,
>> but at least the outcome of its usage is now
>> pretty clear for me).
>> What I still want to point out is the fact that the
>> implementation in linux was very unlikely caused
>> by a confusion. It was the decision made in agreement
>> with the most straight-forward reading of the posix
>> spec, just maybe without knowing about this EINVAL
>> problem. And it can't create a compatibility problem
>> by itself because no one have explicitly promoted its
>> use: 0 is still accepted.
>> Why it could create a compatibility problem is only
>> because people suddenly started to use it, and for
>> the very simple reason (judging by myself): I was
>> absolutely confused with this '0' in the example, and
>> after many attempts to find even a slightest hint in
>> the same doc why it is safe (why SS_DISABLE can't
>> be 0), I resorted to looking into the kernel and the
>> code of other projects. And SS_ONSTACK looked
>> like a perfectly valid solution, fully agreeing with
>> the text (i.e. SS_ONSTACK != SS_DISABLE).
>> So what really creates a compatibility problem here,
>> is only a misleading text (or a misleading implementation
>> of it in other OSes). And as such, stating that "someone
>> was confused" looks more like an unjustified insult to me. :)
>
> See previous mail :-).
>
> Just by the bye, the correct (according to my definition)
> way of doing things (ss.ss_flags == 0 to establish an
> alternate signal stack) has been documented in the manual
> page since 2001. (That page documented the Linux 2.2
> behavior.)
>
>>> 1. The field is named '*flags', which commonly means a bit mask.
>> Indeed, but the value suggests otherwise.
>> The name for a flag could be "SS_DISABLED"
>> (with D at the end), while "SS_DISABLE" suggests
>> an action. And indeed, it doesn't change a property
>> of a performing action the way SS_AUTODISARM
>> does. Instead it changes the action itself: the sas
>> get cleared instead of being set, and all the other
>> arguments are ignored. Eg I would be very surprised
>> seeing the "MAP_UNMAP" flag to mmap() that turns
>> it into munmap(). This more resembles the "action"
>> argument of the sigprocmask() call.
>>
>>> 2. The example in that you mention that is in the spec is part of
>>> the spec. It illustrates the understanding of the developers
>>> of the spec about the interface they were specifying.
>>> 3. Various existing implementations treat the field as a bit mask
>>> for which there is only one valid bit (SS_DISABLE), doing
>>> tests of the form (ss.ss_flags & SS_DISABLE).
>>> 4. Some implementations (including *all* the ones that I looked at
>>> the source code for, that is Illumos, FreeBSD, OpenBSD)
>>> explicitly error if ss.ss_flags has bits other than SS_DISABLE set.
>> Well, yes, those are the practical arguments that
>> can't be ignored... Of course the one can try to
>> submit the patch to these projects that nullifies
>> this argument. :)
>>
>>> 6. Before kernel 2.4 (Jan 2001), Linux also used to do 3 & 4!
>> Is there a discussion about this change somewhere?
>>
>>> 8. The standard explicitly mentions that SS_ONSTACK may be returned
>>> in old_ss.ss_flags, but makes no mention of the use of SS_ONSTACK
>>> in ss.ss_flags. That fact should, IMO, be taken as a strong hint
>>> that the standard developers did not believe that SS_ONSTACK was
>>> to be used with ss.ss_flags.
>> But this doesn't matter as they "seemingly" allow
>> any other value than SS_DISABLE, and this one is
>> the most reasonable value of all (unless you know
>> this is a bitmask, of course).
>>
>> So to make it clear: I am not arguing to what is
>> better or more portable. I am just not satisfied
>> with the statement that whoever implemented
>> it that way (and whoever uses it, too, obviously),
>> was confused or read the standard badly. It is
>> not the case. Also I don't agree that this implementation
>> can create any (portability or any other) kind of
>> problem: it still accepts 0, and its author didn't
>> advice anyone to use SS_ONSTACK. So in my eyes
>> the implementation is perfectly valid, no ifs no
>> buts. :) Man page can warn people to not use
>> SS_ONSTACK, but it shouldn't blame the author
>> of the kernel code in question IMHO.
>>
>>>>>>> API history is littered with stories where users found out that
>>>>>>> something unforeseen "worked", and so they used it. The question
>>>>>>> is: what can go wrong if people do try using this "feature"?
>>>>>> It will disappear at the exit from SIGA.
>>>>>> To me this is "wrong enough" to not suggest doing so.
>>>>> See my comment above. It's weird because it will disappear at exit
>>>>> from SIGA, but not "wrong".
>>>> What do you mean?
>>>> There was no any notion of the "sigaltstack scope",
>>>> so with the existing semantic it is wrong, because
>>>> currently sigaltstack has no scope and can't change
>>> I'm not sure what you mean by "currently" here. I'm pointing
>>> out that whereas before one could not change the signal stack
>>> while executing a handler that is using a signal stack, now it
>>> seems to be possible. But, it's not random: the programmer must
>>> explicitly make this happen (and be lucky in the timing of signals).
>> By "random points" I meant that sas swaps back
>> to the previous one on a sighandler return. This
>> sighandler return is just a random point for anyone
>> who assumes the global scope of the sas. And the
>> scope of sas was always global, so from that POV
>> it doesn't work reliably. If you invent some notion
>> of the scoped sigaltstacks, then you will turn that
>> into a working functionality with new semantic.
>> But I don't think you can call this "working" without
>> first inventing an adequate semantic for it.
>>
>>>> at random moments. You can make it "not wrong"
>>>> by inventing a new semantic with some notion of
>>>> the "sigaltstack scope" though. Whether it worth the
>>>> troubles, is what we will see. :)
>>> I don't think I'm inventing a new semantic. I think you already
>>> did that :-). The question is what we should say about it in the
>>> man page. I don't think being silent on this detail is the way to
>>> go. Perhaps noting a few details and warning the reader strongly
>>> against relying on this "feature" in any way is appropriate?
>> This is entirely up to you. My point is just that it is
>> not a "few details", but really a new semantic with
>> a notion of a sas's scope. I.e. when the control goes
>> out of current scope (sighandler return), sas reverts
>> to the one of the parent scope. Since this was not
>> envisioned and is unlikely needed to anyone, I was
>> just suggesting to not do this, but if you want to spec
>> this all - why not. :)
>>
>>>>>> The kernel already has the sigaltstack test-case,
>>>>>> so maybe you can add some checks to it from your
>>>>>> test-case.
>>>>> I must admit I'm still trying to grasp some details of what's
>>>>> possible. What tests do you think could be usefully added?
>>>> If you are going to add the scoped/nested sigaltstacks,
>>>> then perhaps you should add the test that nesting works
>>>> correctly (you have that already in your test-case), and
>>>> maybe also the direct manipulations to uc_stack, as this
>>>> is the only _reliable_ way to set the new sas inside the
>>>> sighandler, that I can think of.
>>> See above. I'm not sure that we want to specify things to this
>>> level. But my point is that in the lack of any text in the man
>>> page on the topic, some user-space programmers will discover the
>>> feature and perhaps try to use it. The question is what the man
>>> page should say to those programmers. Do you see what I mean?
>> Yes, but I don't see what the man page should say
>> to those programmers. :) Or if I do, the description
>> would became too lengthy and complex.
>
> So, the man page text currently says:
>
> If old_ss is not NULL, then it is used to return information about
> the alternate signal stack which was in effect prior to the call
> to sigaltstack(). The old_ss.ss_sp and old_ss.ss_size fields
> return the starting address and size of that stack. The
> old_ss.ss_flags may return either of the following values:
>
> SS_ONSTACK
> The process is currently executing on the alternate signal
> stack. (Note that it is not possible to change the alter‐
> nate signal stack if the process is currently executing on
> it.)
>
> SS_DISABLE
> The alternate signal stack is currently disabled.
>
> Alternatively, this value is returned if the process is
> currently executing on an alternate signal stack that was
> established using the SS_AUTODISARM flag. In this case, it
> is safe to switch away from the signal handler with swap‐
> context(3). It is also possible to set up a different
> alternative signal stack using a further call to sigalt‐
> stack().
>
> So, given the discussion so far, I think that last sentence needs to
> be changed. A simple change would be to just remove the sentence.
> However, as I've tried to bring out, I think that *not* documenting
> something is generally not a winning strategy. Eventually, people
> figure out what's possible, and someone may try using the feature.
> So, as well as removing that sentence, how about some text something
> like the following in NOTES:
>
> When old_ss.ss_flags returns SS_DISABLE, meaning the
> process is currently executing a signal handler ("X")
> on an alternate signal stack that was established
> using the SS_AUTODISARM flag, then it is
> possible inside that handler to set up a new
> alternative signal stack using a further call to
> sigaltstack(). However, this is not recommended. Taking
> advantage of this possibility is inherently racy, since
> the new alternate signal stack settings will be removed
> when signal handler "X" returns.
>
> ?
>
> Thanks,
>
> Michael
>
>
>
>
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
From 1582687220985006577@xxx Mon Oct 30 12:55:53 +0000 2017
X-GM-THRID: 1582678540934340950
X-Gmail-Labels: Inbox,Category Forums