2014-12-01 13:24:43

by Nicolas Ferre

Subject: [PATCH 1/4] ARM: at91/defconfig: add the XDMA driver

Add the Atmel eXtended DMA Controller driver option. This driver is first used
on SAMA5D4 SoCs and only relevant in sama5_defconfig file.

Signed-off-by: Nicolas Ferre <[email protected]>
---
arch/arm/configs/sama5_defconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 12e1fcbc9a2b..d1a2ee5b7b50 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -177,6 +177,7 @@ CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_DMADEVICES=y
+CONFIG_AT_XDMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
--
2.1.3

2014-12-01 13:25:05

by Nicolas Ferre

Subject: [PATCH 2/4] ARM: at91/defconfig: add TCB PWM driver selection

This is the selection of the new PWM driver using TC Blocks. This driver is
useful so we enable it in both sama5 and at91_dt defconfig files.

Signed-off-by: Nicolas Ferre <[email protected]>
---
arch/arm/configs/at91_dt_defconfig | 1 +
arch/arm/configs/sama5_defconfig | 1 +
2 files changed, 2 insertions(+)

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 3b515c179487..cb6ec18ce68b 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -186,6 +186,7 @@ CONFIG_IIO=y
CONFIG_AT91_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
+CONFIG_PWM_ATMEL_TCB=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index d1a2ee5b7b50..b58fb32770a0 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -183,6 +183,7 @@ CONFIG_IIO=y
CONFIG_AT91_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
+CONFIG_PWM_ATMEL_TCB=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
--
2.1.3

2014-12-01 13:25:34

by Nicolas Ferre

Subject: [PATCH 4/4] ARM: at91/defconfig: add DM9000 to at91_dt

This chip is present on at91sam9261ek board: add it to the at91_dt_defconfig.

Signed-off-by: Nicolas Ferre <[email protected]>
---
arch/arm/configs/at91_dt_defconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 6ccf937a60f2..a67375f24b21 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -80,6 +80,7 @@ CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_DM9000=y
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
--
2.1.3

2014-12-01 13:28:24

by Nicolas Ferre

Subject: [PATCH 3/4] ARM: at91/defconfig: add QT1070 to at91_dt

As this touch button driver is used on at91sam9x5ek, it's better to enable it.

Signed-off-by: Nicolas Ferre <[email protected]>
---
arch/arm/configs/at91_dt_defconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index cb6ec18ce68b..6ccf937a60f2 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -113,6 +113,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
--
2.1.3