This series adds missing bindings for Type-C typec-power-opmode property
and STUSB160x Type-C port controllers [1].
STUSB160x driver requires to get power operation mode via device tree,
that's why this series also adds the optional DT property
typec-power-opmode for usb-c-connector to select the power operation mode
capability.
Tested on stm32mp157c-dk2 [2], which has a Type-C connector managed by
STUSB1600, and connected to USB OTG controller.
[1] https://www.st.com/en/interfaces-and-transceivers/usb-type-c-and-power-delivery-controllers.html
[2] https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html
Amelie Delaunay (5):
dt-bindings: connector: add typec-power-opmode property to
usb-connector
dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
usb: typec: stusb160x: fix power-opmode property with
typec-power-opmode
ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller
support
---
Changes in v5:
- add additionalProperties to st,stusb160x yaml
- add Heikki reviewed-by on stusb160x driver patch 3/5
Changes in v4:
- power-opmode DT property renamed to typec-power-opmode and mutually
exclusive condition with new-source-frs-typec-current added
- Due to DT property renaming, patch 3/5 is added to update stusb160x
driver.
---
.../bindings/connector/usb-connector.yaml | 24 +++++
.../devicetree/bindings/usb/st,stusb160x.yaml | 87 +++++++++++++++++++
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 7 ++
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 30 +++++++
arch/arm/configs/multi_v7_defconfig | 2 +
drivers/usb/typec/stusb160x.c | 2 +-
6 files changed, 151 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml
--
2.17.1
Hi,
On 11/6/20 5:58 PM, Amelie Delaunay wrote:
> This series adds missing bindings for Type-C typec-power-opmode property
> and STUSB160x Type-C port controllers [1].
> STUSB160x driver requires to get power operation mode via device tree,
> that's why this series also adds the optional DT property
> typec-power-opmode for usb-c-connector to select the power operation mode
> capability.
> Tested on stm32mp157c-dk2 [2], which has a Type-C connector managed by
> STUSB1600, and connected to USB OTG controller.
>
> [1] https://www.st.com/en/interfaces-and-transceivers/usb-type-c-and-power-delivery-controllers.html
> [2] https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html
>
>
> Amelie Delaunay (5):
> dt-bindings: connector: add typec-power-opmode property to
> usb-connector
> dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
> usb: typec: stusb160x: fix power-opmode property with
> typec-power-opmode
> ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
> ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller
> support
>
Device tree and bindings patches ([1],[2],[4],[5]) have been applied to
stm32-next (and will go through arm-soc tree).
Greg, I let you apply patch [3] into usb tree.
Thanks
Alex
> ---
> Changes in v5:
> - add additionalProperties to st,stusb160x yaml
> - add Heikki reviewed-by on stusb160x driver patch 3/5
> Changes in v4:
> - power-opmode DT property renamed to typec-power-opmode and mutually
> exclusive condition with new-source-frs-typec-current added
> - Due to DT property renaming, patch 3/5 is added to update stusb160x
> driver.
> ---
> .../bindings/connector/usb-connector.yaml | 24 +++++
> .../devicetree/bindings/usb/st,stusb160x.yaml | 87 +++++++++++++++++++
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 7 ++
> arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 30 +++++++
> arch/arm/configs/multi_v7_defconfig | 2 +
> drivers/usb/typec/stusb160x.c | 2 +-
> 6 files changed, 151 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml
>