peer->outbuf is a virtual address which is get by ioremap, it can not
be converted to a physical address by virt_to_page and page_to_phys.
This conversion will result in DMA error, because the destination address
which is converted by page_to_phys is invalid.
This patch save the MMIO address of NTB BARx in perf_setup_peer_mw,
and map the BAR space to DMA address after we assign the DMA channel.
Then fill the destination address of DMA descriptor with this DMA address
to guarantee that the address of memory write requests fall into
memory window of NBT BARx with IOMMU enabled and disabled.
Changes since v1:
* Map NTB BARx MMIO address to DMA address after assign the DMA channel,
to ensure the destination address in valid. (per suggestion from Logan)
Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Jiasen Lin <[email protected]>
---
drivers/ntb/test/ntb_perf.c | 69 ++++++++++++++++++++++++++++++++++++---------
1 file changed, 56 insertions(+), 13 deletions(-)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index e9b7c2d..dfca7e1 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -149,7 +149,8 @@ struct perf_peer {
u64 outbuf_xlat;
resource_size_t outbuf_size;
void __iomem *outbuf;
-
+ phys_addr_t out_phys_addr;
+ dma_addr_t dma_dst_addr;
/* Inbound MW params */
dma_addr_t inbuf_xlat;
resource_size_t inbuf_size;
@@ -776,7 +777,8 @@ static void perf_dma_copy_callback(void *data)
}
static int perf_copy_chunk(struct perf_thread *pthr,
- void __iomem *dst, void *src, size_t len)
+ void __iomem *dst, void *src, size_t len,
+ dma_addr_t dst_dma_addr)
{
struct dma_async_tx_descriptor *tx;
struct dmaengine_unmap_data *unmap;
@@ -807,8 +809,7 @@ static int perf_copy_chunk(struct perf_thread *pthr,
}
unmap->to_cnt = 1;
- unmap->addr[1] = dma_map_page(dma_dev, virt_to_page(dst),
- offset_in_page(dst), len, DMA_FROM_DEVICE);
+ unmap->addr[1] = dst_dma_addr;
if (dma_mapping_error(dma_dev, unmap->addr[1])) {
ret = -EIO;
goto err_free_resource;
@@ -865,6 +866,7 @@ static int perf_init_test(struct perf_thread *pthr)
{
struct perf_ctx *perf = pthr->perf;
dma_cap_mask_t dma_mask;
+ struct perf_peer *peer = pthr->perf->test_peer;
pthr->src = kmalloc_node(perf->test_peer->outbuf_size, GFP_KERNEL,
dev_to_node(&perf->ntb->dev));
@@ -882,15 +884,33 @@ static int perf_init_test(struct perf_thread *pthr)
if (!pthr->dma_chan) {
dev_err(&perf->ntb->dev, "%d: Failed to get DMA channel\n",
pthr->tidx);
- atomic_dec(&perf->tsync);
- wake_up(&perf->twait);
- kfree(pthr->src);
- return -ENODEV;
+ goto err_free;
+ }
+ peer->dma_dst_addr =
+ dma_map_resource(pthr->dma_chan->device->dev,
+ peer->out_phys_addr, peer->outbuf_size,
+ DMA_FROM_DEVICE, 0);
+ if (dma_mapping_error(pthr->dma_chan->device->dev,
+ peer->dma_dst_addr)) {
+ dev_err(pthr->dma_chan->device->dev, "%d: Failed to map DMA addr\n",
+ pthr->tidx);
+ peer->dma_dst_addr = 0;
+ dma_release_channel(pthr->dma_chan);
+ goto err_free;
}
+ dev_dbg(pthr->dma_chan->device->dev, "%d: Map MMIO %pa to DMA addr %pad\n",
+ pthr->tidx,
+ &peer->out_phys_addr,
+ &peer->dma_dst_addr);
atomic_set(&pthr->dma_sync, 0);
-
return 0;
+
+err_free:
+ atomic_dec(&perf->tsync);
+ wake_up(&perf->twait);
+ kfree(pthr->src);
+ return -ENODEV;
}
static int perf_run_test(struct perf_thread *pthr)
@@ -901,6 +921,8 @@ static int perf_run_test(struct perf_thread *pthr)
u64 total_size, chunk_size;
void *flt_src;
int ret = 0;
+ dma_addr_t flt_dma_addr;
+ dma_addr_t bnd_dma_addr;
total_size = 1ULL << total_order;
chunk_size = 1ULL << chunk_order;
@@ -910,11 +932,15 @@ static int perf_run_test(struct perf_thread *pthr)
bnd_dst = peer->outbuf + peer->outbuf_size;
flt_dst = peer->outbuf;
+ flt_dma_addr = peer->dma_dst_addr;
+ bnd_dma_addr = peer->dma_dst_addr + peer->outbuf_size;
+
pthr->duration = ktime_get();
/* Copied field is cleared on test launch stage */
while (pthr->copied < total_size) {
- ret = perf_copy_chunk(pthr, flt_dst, flt_src, chunk_size);
+ ret = perf_copy_chunk(pthr, flt_dst, flt_src, chunk_size,
+ flt_dma_addr);
if (ret) {
dev_err(&perf->ntb->dev, "%d: Got error %d on test\n",
pthr->tidx, ret);
@@ -925,8 +951,15 @@ static int perf_run_test(struct perf_thread *pthr)
flt_dst += chunk_size;
flt_src += chunk_size;
- if (flt_dst >= bnd_dst || flt_dst < peer->outbuf) {
+ flt_dma_addr += chunk_size;
+
+ if (flt_dst >= bnd_dst ||
+ flt_dst < peer->outbuf ||
+ flt_dma_addr >= bnd_dma_addr ||
+ flt_dma_addr < peer->dma_dst_addr) {
+
flt_dst = peer->outbuf;
+ flt_dma_addr = peer->dma_dst_addr;
flt_src = pthr->src;
}
@@ -978,8 +1011,13 @@ static void perf_clear_test(struct perf_thread *pthr)
* We call it anyway just to be sure of the transfers completion.
*/
(void)dmaengine_terminate_sync(pthr->dma_chan);
-
- dma_release_channel(pthr->dma_chan);
+ if (pthr->perf->test_peer->dma_dst_addr)
+ dma_unmap_resource(pthr->dma_chan->device->dev,
+ pthr->perf->test_peer->dma_dst_addr,
+ pthr->perf->test_peer->outbuf_size,
+ DMA_FROM_DEVICE, 0);
+ if (pthr->dma_chan)
+ dma_release_channel(pthr->dma_chan);
no_dma_notify:
atomic_dec(&perf->tsync);
@@ -1195,6 +1233,9 @@ static ssize_t perf_dbgfs_read_info(struct file *filep, char __user *ubuf,
"\tOut buffer addr 0x%pK\n", peer->outbuf);
pos += scnprintf(buf + pos, buf_size - pos,
+ "\tOut buff phys addr %pa[p]\n", &peer->out_phys_addr);
+
+ pos += scnprintf(buf + pos, buf_size - pos,
"\tOut buffer size %pa\n", &peer->outbuf_size);
pos += scnprintf(buf + pos, buf_size - pos,
@@ -1388,6 +1429,8 @@ static int perf_setup_peer_mw(struct perf_peer *peer)
if (!peer->outbuf)
return -ENOMEM;
+ peer->out_phys_addr = phys_addr;
+
if (max_mw_size && peer->outbuf_size > max_mw_size) {
peer->outbuf_size = max_mw_size;
dev_warn(&peer->perf->ntb->dev,
--
2.7.4
On 2019-11-18 9:02 p.m., Jiasen Lin wrote:
> peer->outbuf is a virtual address which is get by ioremap, it can not
> be converted to a physical address by virt_to_page and page_to_phys.
> This conversion will result in DMA error, because the destination address
> which is converted by page_to_phys is invalid.
>
> This patch save the MMIO address of NTB BARx in perf_setup_peer_mw,
> and map the BAR space to DMA address after we assign the DMA channel.
> Then fill the destination address of DMA descriptor with this DMA address
> to guarantee that the address of memory write requests fall into
> memory window of NBT BARx with IOMMU enabled and disabled.
>
> Changes since v1:
> * Map NTB BARx MMIO address to DMA address after assign the DMA channel,
> to ensure the destination address in valid. (per suggestion from Logan)
>
> Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
> Signed-off-by: Jiasen Lin <[email protected]>
Thanks, looks good to me except for the one nit below.
Reviewed-by: Logan Gunthorpe <[email protected]>
> ---
> drivers/ntb/test/ntb_perf.c | 69 ++++++++++++++++++++++++++++++++++++---------
> 1 file changed, 56 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
> index e9b7c2d..dfca7e1 100644
> --- a/drivers/ntb/test/ntb_perf.c
> +++ b/drivers/ntb/test/ntb_perf.c
> @@ -149,7 +149,8 @@ struct perf_peer {
> u64 outbuf_xlat;
> resource_size_t outbuf_size;
> void __iomem *outbuf;
> -
> + phys_addr_t out_phys_addr;
> + dma_addr_t dma_dst_addr;
> /* Inbound MW params */
> dma_addr_t inbuf_xlat;
> resource_size_t inbuf_size;
> @@ -776,7 +777,8 @@ static void perf_dma_copy_callback(void *data)
> }
>
> static int perf_copy_chunk(struct perf_thread *pthr,
> - void __iomem *dst, void *src, size_t len)
> + void __iomem *dst, void *src, size_t len,
> + dma_addr_t dst_dma_addr)
> {
> struct dma_async_tx_descriptor *tx;
> struct dmaengine_unmap_data *unmap;
> @@ -807,8 +809,7 @@ static int perf_copy_chunk(struct perf_thread *pthr,
> }
> unmap->to_cnt = 1;
>
> - unmap->addr[1] = dma_map_page(dma_dev, virt_to_page(dst),
> - offset_in_page(dst), len, DMA_FROM_DEVICE);
> + unmap->addr[1] = dst_dma_addr;
> if (dma_mapping_error(dma_dev, unmap->addr[1])) {
> ret = -EIO;
> goto err_free_resource;
> @@ -865,6 +866,7 @@ static int perf_init_test(struct perf_thread *pthr)
> {
> struct perf_ctx *perf = pthr->perf;
> dma_cap_mask_t dma_mask;
> + struct perf_peer *peer = pthr->perf->test_peer;
>
> pthr->src = kmalloc_node(perf->test_peer->outbuf_size, GFP_KERNEL,
> dev_to_node(&perf->ntb->dev));
> @@ -882,15 +884,33 @@ static int perf_init_test(struct perf_thread *pthr)
> if (!pthr->dma_chan) {
> dev_err(&perf->ntb->dev, "%d: Failed to get DMA channel\n",
> pthr->tidx);
> - atomic_dec(&perf->tsync);
> - wake_up(&perf->twait);
> - kfree(pthr->src);
> - return -ENODEV;
> + goto err_free;
> + }
> + peer->dma_dst_addr =
> + dma_map_resource(pthr->dma_chan->device->dev,
> + peer->out_phys_addr, peer->outbuf_size,
> + DMA_FROM_DEVICE, 0);
> + if (dma_mapping_error(pthr->dma_chan->device->dev,
> + peer->dma_dst_addr)) {
> + dev_err(pthr->dma_chan->device->dev, "%d: Failed to map DMA addr\n",
> + pthr->tidx);
> + peer->dma_dst_addr = 0;
> + dma_release_channel(pthr->dma_chan);
> + goto err_free;
> }
> + dev_dbg(pthr->dma_chan->device->dev, "%d: Map MMIO %pa to DMA addr %pad\n",
> + pthr->tidx,
> + &peer->out_phys_addr,
> + &peer->dma_dst_addr);
>
> atomic_set(&pthr->dma_sync, 0);
> -
> return 0;
> +
> +err_free:
> + atomic_dec(&perf->tsync);
> + wake_up(&perf->twait);
> + kfree(pthr->src);
> + return -ENODEV;
> }
>
> static int perf_run_test(struct perf_thread *pthr)
> @@ -901,6 +921,8 @@ static int perf_run_test(struct perf_thread *pthr)
> u64 total_size, chunk_size;
> void *flt_src;
> int ret = 0;
> + dma_addr_t flt_dma_addr;
> + dma_addr_t bnd_dma_addr;
>
> total_size = 1ULL << total_order;
> chunk_size = 1ULL << chunk_order;
> @@ -910,11 +932,15 @@ static int perf_run_test(struct perf_thread *pthr)
> bnd_dst = peer->outbuf + peer->outbuf_size;
> flt_dst = peer->outbuf;
>
> + flt_dma_addr = peer->dma_dst_addr;
> + bnd_dma_addr = peer->dma_dst_addr + peer->outbuf_size;
> +
> pthr->duration = ktime_get();
>
> /* Copied field is cleared on test launch stage */
> while (pthr->copied < total_size) {
> - ret = perf_copy_chunk(pthr, flt_dst, flt_src, chunk_size);
> + ret = perf_copy_chunk(pthr, flt_dst, flt_src, chunk_size,
> + flt_dma_addr);
> if (ret) {
> dev_err(&perf->ntb->dev, "%d: Got error %d on test\n",
> pthr->tidx, ret);
> @@ -925,8 +951,15 @@ static int perf_run_test(struct perf_thread *pthr)
>
> flt_dst += chunk_size;
> flt_src += chunk_size;
> - if (flt_dst >= bnd_dst || flt_dst < peer->outbuf) {
> + flt_dma_addr += chunk_size;
> +
> + if (flt_dst >= bnd_dst ||
> + flt_dst < peer->outbuf ||
> + flt_dma_addr >= bnd_dma_addr ||
Nit: I'm pretty sure the check against bnd_dma_addr is redundant with
the check on bnd_dst.
> + flt_dma_addr < peer->dma_dst_addr) {
> +
> flt_dst = peer->outbuf;
> + flt_dma_addr = peer->dma_dst_addr;
> flt_src = pthr->src;
> }
>
> @@ -978,8 +1011,13 @@ static void perf_clear_test(struct perf_thread *pthr)
> * We call it anyway just to be sure of the transfers completion.
> */
> (void)dmaengine_terminate_sync(pthr->dma_chan);
> -
> - dma_release_channel(pthr->dma_chan);
> + if (pthr->perf->test_peer->dma_dst_addr)
> + dma_unmap_resource(pthr->dma_chan->device->dev,
> + pthr->perf->test_peer->dma_dst_addr,
> + pthr->perf->test_peer->outbuf_size,
> + DMA_FROM_DEVICE, 0);
> + if (pthr->dma_chan)
> + dma_release_channel(pthr->dma_chan);
>
> no_dma_notify:
> atomic_dec(&perf->tsync);
> @@ -1195,6 +1233,9 @@ static ssize_t perf_dbgfs_read_info(struct file *filep, char __user *ubuf,
> "\tOut buffer addr 0x%pK\n", peer->outbuf);
>
> pos += scnprintf(buf + pos, buf_size - pos,
> + "\tOut buff phys addr %pa[p]\n", &peer->out_phys_addr);
> +
> + pos += scnprintf(buf + pos, buf_size - pos,
> "\tOut buffer size %pa\n", &peer->outbuf_size);
>
> pos += scnprintf(buf + pos, buf_size - pos,
> @@ -1388,6 +1429,8 @@ static int perf_setup_peer_mw(struct perf_peer *peer)
> if (!peer->outbuf)
> return -ENOMEM;
>
> + peer->out_phys_addr = phys_addr;
> +
> if (max_mw_size && peer->outbuf_size > max_mw_size) {
> peer->outbuf_size = max_mw_size;
> dev_warn(&peer->perf->ntb->dev,
>
On 2019/11/20 0:50, Logan Gunthorpe wrote:
>
>
> On 2019-11-18 9:02 p.m., Jiasen Lin wrote:
>> peer->outbuf is a virtual address which is get by ioremap, it can not
>> be converted to a physical address by virt_to_page and page_to_phys.
>> This conversion will result in DMA error, because the destination address
>> which is converted by page_to_phys is invalid.
>>
>> This patch save the MMIO address of NTB BARx in perf_setup_peer_mw,
>> and map the BAR space to DMA address after we assign the DMA channel.
>> Then fill the destination address of DMA descriptor with this DMA address
>> to guarantee that the address of memory write requests fall into
>> memory window of NBT BARx with IOMMU enabled and disabled.
>>
>> Changes since v1:
>> * Map NTB BARx MMIO address to DMA address after assign the DMA channel,
>> to ensure the destination address in valid. (per suggestion from Logan)
>>
>> Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
>> Signed-off-by: Jiasen Lin <[email protected]>
>
> Thanks, looks good to me except for the one nit below.
>
> Reviewed-by: Logan Gunthorpe <[email protected]>
>
>> ---
>> drivers/ntb/test/ntb_perf.c | 69 ++++++++++++++++++++++++++++++++++++---------
>> 1 file changed, 56 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
>> index e9b7c2d..dfca7e1 100644
>> --- a/drivers/ntb/test/ntb_perf.c
>> +++ b/drivers/ntb/test/ntb_perf.c
>> @@ -149,7 +149,8 @@ struct perf_peer {
>> u64 outbuf_xlat;
>> resource_size_t outbuf_size;
>> void __iomem *outbuf;
>> -
>> + phys_addr_t out_phys_addr;
>> + dma_addr_t dma_dst_addr;
>> /* Inbound MW params */
>> dma_addr_t inbuf_xlat;
>> resource_size_t inbuf_size;
>> @@ -776,7 +777,8 @@ static void perf_dma_copy_callback(void *data)
>> }
>>
>> static int perf_copy_chunk(struct perf_thread *pthr,
>> - void __iomem *dst, void *src, size_t len)
>> + void __iomem *dst, void *src, size_t len,
>> + dma_addr_t dst_dma_addr)
>> {
>> struct dma_async_tx_descriptor *tx;
>> struct dmaengine_unmap_data *unmap;
>> @@ -807,8 +809,7 @@ static int perf_copy_chunk(struct perf_thread *pthr,
>> }
>> unmap->to_cnt = 1;
>>
>> - unmap->addr[1] = dma_map_page(dma_dev, virt_to_page(dst),
>> - offset_in_page(dst), len, DMA_FROM_DEVICE);
>> + unmap->addr[1] = dst_dma_addr;
>> if (dma_mapping_error(dma_dev, unmap->addr[1])) {
>> ret = -EIO;
>> goto err_free_resource;
>> @@ -865,6 +866,7 @@ static int perf_init_test(struct perf_thread *pthr)
>> {
>> struct perf_ctx *perf = pthr->perf;
>> dma_cap_mask_t dma_mask;
>> + struct perf_peer *peer = pthr->perf->test_peer;
>>
>> pthr->src = kmalloc_node(perf->test_peer->outbuf_size, GFP_KERNEL,
>> dev_to_node(&perf->ntb->dev));
>> @@ -882,15 +884,33 @@ static int perf_init_test(struct perf_thread *pthr)
>> if (!pthr->dma_chan) {
>> dev_err(&perf->ntb->dev, "%d: Failed to get DMA channel\n",
>> pthr->tidx);
>> - atomic_dec(&perf->tsync);
>> - wake_up(&perf->twait);
>> - kfree(pthr->src);
>> - return -ENODEV;
>> + goto err_free;
>> + }
>> + peer->dma_dst_addr =
>> + dma_map_resource(pthr->dma_chan->device->dev,
>> + peer->out_phys_addr, peer->outbuf_size,
>> + DMA_FROM_DEVICE, 0);
>> + if (dma_mapping_error(pthr->dma_chan->device->dev,
>> + peer->dma_dst_addr)) {
>> + dev_err(pthr->dma_chan->device->dev, "%d: Failed to map DMA addr\n",
>> + pthr->tidx);
>> + peer->dma_dst_addr = 0;
>> + dma_release_channel(pthr->dma_chan);
>> + goto err_free;
>> }
>> + dev_dbg(pthr->dma_chan->device->dev, "%d: Map MMIO %pa to DMA addr %pad\n",
>> + pthr->tidx,
>> + &peer->out_phys_addr,
>> + &peer->dma_dst_addr);
>>
>> atomic_set(&pthr->dma_sync, 0);
>> -
>> return 0;
>> +
>> +err_free:
>> + atomic_dec(&perf->tsync);
>> + wake_up(&perf->twait);
>> + kfree(pthr->src);
>> + return -ENODEV;
>> }
>>
>> static int perf_run_test(struct perf_thread *pthr)
>> @@ -901,6 +921,8 @@ static int perf_run_test(struct perf_thread *pthr)
>> u64 total_size, chunk_size;
>> void *flt_src;
>> int ret = 0;
>> + dma_addr_t flt_dma_addr;
>> + dma_addr_t bnd_dma_addr;
>>
>> total_size = 1ULL << total_order;
>> chunk_size = 1ULL << chunk_order;
>> @@ -910,11 +932,15 @@ static int perf_run_test(struct perf_thread *pthr)
>> bnd_dst = peer->outbuf + peer->outbuf_size;
>> flt_dst = peer->outbuf;
>>
>> + flt_dma_addr = peer->dma_dst_addr;
>> + bnd_dma_addr = peer->dma_dst_addr + peer->outbuf_size;
>> +
>> pthr->duration = ktime_get();
>>
>> /* Copied field is cleared on test launch stage */
>> while (pthr->copied < total_size) {
>> - ret = perf_copy_chunk(pthr, flt_dst, flt_src, chunk_size);
>> + ret = perf_copy_chunk(pthr, flt_dst, flt_src, chunk_size,
>> + flt_dma_addr);
>> if (ret) {
>> dev_err(&perf->ntb->dev, "%d: Got error %d on test\n",
>> pthr->tidx, ret);
>> @@ -925,8 +951,15 @@ static int perf_run_test(struct perf_thread *pthr)
>>
>> flt_dst += chunk_size;
>> flt_src += chunk_size;
>> - if (flt_dst >= bnd_dst || flt_dst < peer->outbuf) {
>> + flt_dma_addr += chunk_size;
>> +
>> + if (flt_dst >= bnd_dst ||
>> + flt_dst < peer->outbuf ||
>> + flt_dma_addr >= bnd_dma_addr ||
>
> Nit: I'm pretty sure the check against bnd_dma_addr is redundant with
> the check on bnd_dst.
>
Maybe, it would be better to calculate destination address in version 3
patch. It will be reduce one input argument for perf_copy_chunk, so
flt_dma_addr and bnd_dma_addr are no longer needed.
Take a look at this link:
https://lore.kernel.org/patchwork/patch/1156715/
Thanks,
Jiasen Lin
>> + flt_dma_addr < peer->dma_dst_addr) {
>> +
>> flt_dst = peer->outbuf;
>> + flt_dma_addr = peer->dma_dst_addr;
>> flt_src = pthr->src;
>> }
>>
>> @@ -978,8 +1011,13 @@ static void perf_clear_test(struct perf_thread *pthr)
>> * We call it anyway just to be sure of the transfers completion.
>> */
>> (void)dmaengine_terminate_sync(pthr->dma_chan);
>> -
>> - dma_release_channel(pthr->dma_chan);
>> + if (pthr->perf->test_peer->dma_dst_addr)
>> + dma_unmap_resource(pthr->dma_chan->device->dev,
>> + pthr->perf->test_peer->dma_dst_addr,
>> + pthr->perf->test_peer->outbuf_size,
>> + DMA_FROM_DEVICE, 0);
>> + if (pthr->dma_chan)
>> + dma_release_channel(pthr->dma_chan);
>>
>> no_dma_notify:
>> atomic_dec(&perf->tsync);
>> @@ -1195,6 +1233,9 @@ static ssize_t perf_dbgfs_read_info(struct file *filep, char __user *ubuf,
>> "\tOut buffer addr 0x%pK\n", peer->outbuf);
>>
>> pos += scnprintf(buf + pos, buf_size - pos,
>> + "\tOut buff phys addr %pa[p]\n", &peer->out_phys_addr);
>> +
>> + pos += scnprintf(buf + pos, buf_size - pos,
>> "\tOut buffer size %pa\n", &peer->outbuf_size);
>>
>> pos += scnprintf(buf + pos, buf_size - pos,
>> @@ -1388,6 +1429,8 @@ static int perf_setup_peer_mw(struct perf_peer *peer)
>> if (!peer->outbuf)
>> return -ENOMEM;
>>
>> + peer->out_phys_addr = phys_addr;
>> +
>> if (max_mw_size && peer->outbuf_size > max_mw_size) {
>> peer->outbuf_size = max_mw_size;
>> dev_warn(&peer->perf->ntb->dev,
>>