On Tue, May 27, 2014 at 2:08 AM, Andreas Werner <[email protected]> wrote:
> Added driver to support the 14F021P00 BMC LEDs.
> The BMC is a Board Management Controll include four LEDs which
> can be switched on and off.
>
> This driver use the I2C interface to the BMC using the menf21bmc MFD Core driver.
>
Will you submit v2 patch based on Lee and others' review? I prefer to
review the new one.
Thanks,
-Bryan
> Signed-off-by: Andreas Werner <[email protected]>
> ---
> drivers/leds/Kconfig | 6 ++
> drivers/leds/Makefile | 2 +-
> drivers/leds/leds-menf21bmc.c | 136 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 143 insertions(+), 1 deletion(-)
> create mode 100644 drivers/leds/leds-menf21bmc.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 1e81d7a..8f98e0f 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -466,6 +466,12 @@ config LEDS_OT200
> This option enables support for the LEDs on the Bachmann OT200.
> Say Y to enable LEDs on the Bachmann OT200.
>
> +config LEDS_MENF21BMC
> + tristate "LED support for the MEN 14F021P00 BMC"
> + depends on LEDS_CLASS && MFD_MENF21BMC
> + help
> + Say Y here to include support for the MEN 14F021P00 BMC LEDs.
> +
> comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
>
> config LEDS_BLINKM
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 79c5155..1c465fe 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -54,7 +54,7 @@ obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
> obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
> obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
> obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
> -
> +obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
> # LED SPI Drivers
> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
>
> diff --git a/drivers/leds/leds-menf21bmc.c b/drivers/leds/leds-menf21bmc.c
> new file mode 100644
> index 0000000..6099524
> --- /dev/null
> +++ b/drivers/leds/leds-menf21bmc.c
> @@ -0,0 +1,136 @@
> +/*
> + * MEN 14F021P00 Board Management Controller (BMC) LEDs Driver.
> + *
> + * This is the core LED driver of the MEN 14F021P00 BMC.
> + * There are four LEDs available which can be switched on and off.
> + * STATUS LED, HOT SWAP LED, USER LED 1, USER LED 2
> + *
> + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
> + * Author: Andreas Werner <[email protected]>
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/leds.h>
> +#include <linux/mfd/menf21bmc.h>
> +
> +#define BMC_CMD_LED_GET_SET 0xA0
> +#define BMC_BIT_LED_STATUS BIT(0)
> +#define BMC_BIT_LED_HOTSWAP BIT(1)
> +#define BMC_BIT_LED_USER1 BIT(2)
> +#define BMC_BIT_LED_USER2 BIT(3)
> +
> +struct menf21bmc_led_data {
> + struct led_classdev cdev;
> + struct menf21bmc *menf21bmc;
> + u8 led_bit;
> + const char *name;
> +};
> +
> +static struct menf21bmc_led_data leds[] = {
> + {
> + .name = "menf21bmc:led_status",
> + .led_bit = BMC_BIT_LED_STATUS,
> + },
> + {
> + .name = "menf21bmc:led_hotswap",
> + .led_bit = BMC_BIT_LED_HOTSWAP,
> + },
> + {
> + .name = "menf21bmc:led_user1",
> + .led_bit = BMC_BIT_LED_USER1,
> + },
> + {
> + .name = "menf21bmc:led_user2",
> + .led_bit = BMC_BIT_LED_USER2,
> + }
> +};
> +
> +static DEFINE_MUTEX(led_lock);
> +
> +static void
> +menf21bmc_led_set(struct led_classdev *led_cdev, enum led_brightness value)
> +{
> + int led_val;
> + struct menf21bmc_led_data *led = container_of(led_cdev,
> + struct menf21bmc_led_data, cdev);
> + struct menf21bmc *menf21bmc = led->menf21bmc;
> +
> + mutex_lock(&led_lock);
> + led_val = menf21bmc->read_byte_data(menf21bmc->client,
> + BMC_CMD_LED_GET_SET);
> + if (led_val < 0)
> + goto err_out;
> +
> + if (value == LED_OFF)
> + led_val &= ~led->led_bit;
> + else
> + led_val |= led->led_bit;
> +
> + menf21bmc->write_byte_data(menf21bmc->client,
> + BMC_CMD_LED_GET_SET, led_val);
> +err_out:
> + mutex_unlock(&led_lock);
> +}
> +
> +static int menf21bmc_led_probe(struct platform_device *pdev)
> +{
> + int i;
> + int ret;
> + struct menf21bmc *menf21bmc = dev_get_drvdata(pdev->dev.parent);
> +
> + for (i = 0; i < ARRAY_SIZE(leds); i++) {
> + leds[i].cdev.name = leds[i].name;
> + leds[i].cdev.brightness_set = menf21bmc_led_set;
> + leds[i].menf21bmc = menf21bmc;
> +
> + ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
> + if (ret < 0)
> + goto err_free_leds;
> + }
> + dev_info(&pdev->dev, "MEN 140F21P00 BMC LED device enabled\n");
> +
> + return 0;
> +
> +err_free_leds:
> + dev_err(&pdev->dev, "failed to register LED devicei\n");
> +
> + for (i = i - 1; i >= 0; i--)
> + led_classdev_unregister(&leds[i].cdev);
> +
> + return ret;
> +}
> +
> +static int menf21bmc_led_remove(struct platform_device *pdev)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(leds); i++)
> + led_classdev_unregister(&leds[i].cdev);
> +
> + return 0;
> +}
> +
> +static struct platform_driver menf21bmc_led = {
> + .probe = menf21bmc_led_probe,
> + .remove = menf21bmc_led_remove,
> + .driver = {
> + .name = "menf21bmc_led",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +module_platform_driver(menf21bmc_led);
> +
> +MODULE_AUTHOR("Andreas Werner <[email protected]>");
> +MODULE_DESCRIPTION("MEN 14F021P00 BMC led driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:menf21bmc_led");
> --
> 1.9.3
>
> Von: Bryan Wu [mailto:[email protected]]
> Gesendet: Donnerstag, 26. Juni 2014 01:11
> An: Werner, Andreas
> Cc: lkml; Samuel Ortiz; Lee Jones; [email protected]; linux-
> [email protected]; [email protected]; Linux LED Subsystem;
> Thumshirn, Johannes Tobias
> Betreff: Re: [PATCH v2 3/3] drivers/leds/leds-menf21bmc: introduce MEN
> 14F021P00 BMC LED driver
>
> On Tue, May 27, 2014 at 2:08 AM, Andreas Werner
> <[email protected]> wrote:
> > Added driver to support the 14F021P00 BMC LEDs.
> > The BMC is a Board Management Controll include four LEDs which
> > can be switched on and off.
> >
> > This driver use the I2C interface to the BMC using the menf21bmc MFD Core
> driver.
> >
>
> Will you submit v2 patch based on Lee and others' review? I prefer to
> review the new one.
>
> Thanks,
> -Bryan
Hi,
Andreas is currently on vacation, but he'll send a v3 as soon as he's back.
Johannes
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay? ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?
On Wed, Jun 25, 2014 at 04:10:55PM -0700, Bryan Wu wrote:
> On Tue, May 27, 2014 at 2:08 AM, Andreas Werner <[email protected]> wrote:
> > Added driver to support the 14F021P00 BMC LEDs.
> > The BMC is a Board Management Controll include four LEDs which
> > can be switched on and off.
> >
> > This driver use the I2C interface to the BMC using the menf21bmc MFD Core driver.
> >
>
> Will you submit v2 patch based on Lee and others' review? I prefer to
> review the new one.
>
Patch v3 is submitted so you can start review it :-)
Thanks
Andy
> Thanks,
> -Bryan
>
> > Signed-off-by: Andreas Werner <[email protected]>
> > ---
> > drivers/leds/Kconfig | 6 ++
> > drivers/leds/Makefile | 2 +-
> > drivers/leds/leds-menf21bmc.c | 136 ++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 143 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/leds/leds-menf21bmc.c
> >
> > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> > index 1e81d7a..8f98e0f 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -466,6 +466,12 @@ config LEDS_OT200
> > This option enables support for the LEDs on the Bachmann OT200.
> > Say Y to enable LEDs on the Bachmann OT200.
> >
> > +config LEDS_MENF21BMC
> > + tristate "LED support for the MEN 14F021P00 BMC"
> > + depends on LEDS_CLASS && MFD_MENF21BMC
> > + help
> > + Say Y here to include support for the MEN 14F021P00 BMC LEDs.
> > +
> > comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
> >
> > config LEDS_BLINKM
> > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> > index 79c5155..1c465fe 100644
> > --- a/drivers/leds/Makefile
> > +++ b/drivers/leds/Makefile
> > @@ -54,7 +54,7 @@ obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
> > obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
> > obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
> > obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
> > -
> > +obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
> > # LED SPI Drivers
> > obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
> >
> > diff --git a/drivers/leds/leds-menf21bmc.c b/drivers/leds/leds-menf21bmc.c
> > new file mode 100644
> > index 0000000..6099524
> > --- /dev/null
> > +++ b/drivers/leds/leds-menf21bmc.c
> > @@ -0,0 +1,136 @@
> > +/*
> > + * MEN 14F021P00 Board Management Controller (BMC) LEDs Driver.
> > + *
> > + * This is the core LED driver of the MEN 14F021P00 BMC.
> > + * There are four LEDs available which can be switched on and off.
> > + * STATUS LED, HOT SWAP LED, USER LED 1, USER LED 2
> > + *
> > + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
> > + * Author: Andreas Werner <[email protected]>
> > + * All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License as published by the
> > + * Free Software Foundation; either version 2 of the License, or (at your
> > + * option) any later version.
> > + *
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/leds.h>
> > +#include <linux/mfd/menf21bmc.h>
> > +
> > +#define BMC_CMD_LED_GET_SET 0xA0
> > +#define BMC_BIT_LED_STATUS BIT(0)
> > +#define BMC_BIT_LED_HOTSWAP BIT(1)
> > +#define BMC_BIT_LED_USER1 BIT(2)
> > +#define BMC_BIT_LED_USER2 BIT(3)
> > +
> > +struct menf21bmc_led_data {
> > + struct led_classdev cdev;
> > + struct menf21bmc *menf21bmc;
> > + u8 led_bit;
> > + const char *name;
> > +};
> > +
> > +static struct menf21bmc_led_data leds[] = {
> > + {
> > + .name = "menf21bmc:led_status",
> > + .led_bit = BMC_BIT_LED_STATUS,
> > + },
> > + {
> > + .name = "menf21bmc:led_hotswap",
> > + .led_bit = BMC_BIT_LED_HOTSWAP,
> > + },
> > + {
> > + .name = "menf21bmc:led_user1",
> > + .led_bit = BMC_BIT_LED_USER1,
> > + },
> > + {
> > + .name = "menf21bmc:led_user2",
> > + .led_bit = BMC_BIT_LED_USER2,
> > + }
> > +};
> > +
> > +static DEFINE_MUTEX(led_lock);
> > +
> > +static void
> > +menf21bmc_led_set(struct led_classdev *led_cdev, enum led_brightness value)
> > +{
> > + int led_val;
> > + struct menf21bmc_led_data *led = container_of(led_cdev,
> > + struct menf21bmc_led_data, cdev);
> > + struct menf21bmc *menf21bmc = led->menf21bmc;
> > +
> > + mutex_lock(&led_lock);
> > + led_val = menf21bmc->read_byte_data(menf21bmc->client,
> > + BMC_CMD_LED_GET_SET);
> > + if (led_val < 0)
> > + goto err_out;
> > +
> > + if (value == LED_OFF)
> > + led_val &= ~led->led_bit;
> > + else
> > + led_val |= led->led_bit;
> > +
> > + menf21bmc->write_byte_data(menf21bmc->client,
> > + BMC_CMD_LED_GET_SET, led_val);
> > +err_out:
> > + mutex_unlock(&led_lock);
> > +}
> > +
> > +static int menf21bmc_led_probe(struct platform_device *pdev)
> > +{
> > + int i;
> > + int ret;
> > + struct menf21bmc *menf21bmc = dev_get_drvdata(pdev->dev.parent);
> > +
> > + for (i = 0; i < ARRAY_SIZE(leds); i++) {
> > + leds[i].cdev.name = leds[i].name;
> > + leds[i].cdev.brightness_set = menf21bmc_led_set;
> > + leds[i].menf21bmc = menf21bmc;
> > +
> > + ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
> > + if (ret < 0)
> > + goto err_free_leds;
> > + }
> > + dev_info(&pdev->dev, "MEN 140F21P00 BMC LED device enabled\n");
> > +
> > + return 0;
> > +
> > +err_free_leds:
> > + dev_err(&pdev->dev, "failed to register LED devicei\n");
> > +
> > + for (i = i - 1; i >= 0; i--)
> > + led_classdev_unregister(&leds[i].cdev);
> > +
> > + return ret;
> > +}
> > +
> > +static int menf21bmc_led_remove(struct platform_device *pdev)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(leds); i++)
> > + led_classdev_unregister(&leds[i].cdev);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver menf21bmc_led = {
> > + .probe = menf21bmc_led_probe,
> > + .remove = menf21bmc_led_remove,
> > + .driver = {
> > + .name = "menf21bmc_led",
> > + .owner = THIS_MODULE,
> > + },
> > +};
> > +
> > +module_platform_driver(menf21bmc_led);
> > +
> > +MODULE_AUTHOR("Andreas Werner <[email protected]>");
> > +MODULE_DESCRIPTION("MEN 14F021P00 BMC led driver");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:menf21bmc_led");
> > --
> > 1.9.3
> >