2023-11-28 10:24:41

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 00/45] drm/connector: Create HDMI Connector infrastructure

Hi,

Here's a series that creates some extra infrastructure specifically
targeted at HDMI controllers.

The idea behind this series came from a recent discussion on IRC during
which we discussed infoframes generation of i915 vs everything else.

Infoframes generation code still requires some decent boilerplate, with
each driver doing some variation of it.

In parallel, while working on vc4, we ended up converting a lot of i915
logic (mostly around format / bpc selection, and scrambler setup) to
apply on top of a driver that relies only on helpers.

While currently sitting in the vc4 driver, none of that logic actually
relies on any driver or hardware-specific behaviour.

The only missing piece to make it shareable are a bunch of extra
variables stored in a state (current bpc, format, RGB range selection,
etc.).

The initial implementation was relying on some generic subclass of
drm_connector to address HDMI connectors, with a bunch of helpers that
will take care of all the "HDMI Spec" related code. Scrambler setup is
missing at the moment but can easily be plugged in.

The feedback was that creating a connector subclass like was done for
writeback would prevent the adoption of those helpers since it couldn't
be used in all situations (like when the connector driver can implement
multiple output) and required more churn to cast between the
drm_connector and its subclass. The decision was thus to provide a set
of helper and to store the required variables in drm_connector and
drm_connector_state. This what has been implemented now.

Hans Verkuil also expressed interest in implementing a mechanism in v4l2
to retrieve infoframes from HDMI receiver and implementing an
infoframe-decode tool.

This series thus leverages the infoframe generation code to expose it
through debugfs.

I also used the occasion to unit-test everything but the infoframe
generation, which can come later once I get a proper understanding of
what the infoframe are supposed to look like. This required to add some
extra kunit helpers and infrastructure to have multiple EDIDs and allow
each test to run with a particular set of capabilities.

This entire series has been tested on a Pi4, passes all its unittests
(125 new tests), and has only been build-tested for sunxi and rockchip.

Let me know what you think,
Maxime

Signed-off-by: Maxime Ripard <[email protected]>
---
Changes in v4:
- Create unit tests for everything but infoframes
- Fix a number of bugs identified by the unit tests
- Rename DRM (Dynamic Range and Mastering) infoframe file to HDR_DRM
- Drop RFC status
- Link to v3: https://lore.kernel.org/r/[email protected]

Changes in v3:
- Made sure the series work on the RaspberryPi4
- Handle YUV420 in the char clock rate computation
- Use the maximum bpc value the connector allows at reset
- Expose the RGB Limited vs Full Range value in the connector state
instead of through a helper
- Fix Broadcast RGB documentation
- Add more debug logging
- Small fixes here and there
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Change from a subclass to a set of helpers for drm_connector and
drm_connector state
- Don't assume that all drivers support RGB, YUV420 and YUV422 but make
them provide a bitfield instead.
- Don't assume that all drivers support the Broadcast RGB property but
make them call the registration helper.
- Document the Broacast RGB property
- Convert the inno_hdmi and sun4i_hdmi driver.
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Maxime Ripard (45):
drm/tests: helpers: Include missing drm_drv header
drm/tests: helpers: Add atomic helpers
drm/tests: Add helper to create mock plane
drm/tests: Add helper to create mock crtc
drm/connector: Check drm_connector_init pointers arguments
drm/tests: connector: Add tests for drmm_connector_init
drm/connector: Introduce an HDMI connector initialization function
drm/connector: hdmi: Create an HDMI sub-state
drm/connector: hdmi: Add Broadcast RGB property
drm/connector: hdmi: Add RGB Quantization Range to the connector state
drm/connector: hdmi: Add output BPC to the connector state
drm/connector: hdmi: Add support for output format
drm/connector: hdmi: Add HDMI compute clock helper
drm/connector: hdmi: Calculate TMDS character rate
drm/connector: hdmi: Add custom hook to filter TMDS character rate
drm/connector: hdmi: Compute bpc and format automatically
drm/connector: hdmi: Add Infoframes generation
drm/connector: hdmi: Create Infoframe DebugFS entries
drm/vc4: hdmi: Create destroy state implementation
drm/vc4: hdmi: Switch to HDMI connector
drm/vc4: tests: Remove vc4_dummy_plane structure
drm/vc4: tests: Convert to plane creation helper
drm/rockchip: inno_hdmi: Remove useless mode_fixup
drm/rockchip: inno_hdmi: Remove useless copy of drm_display_mode
drm/rockchip: inno_hdmi: Switch encoder hooks to atomic
drm/rockchip: inno_hdmi: Get rid of mode_set
drm/rockchip: inno_hdmi: no need to store vic
drm/rockchip: inno_hdmi: Remove unneeded has audio flag
drm/rockchip: inno_hdmi: Remove useless input format
drm/rockchip: inno_hdmi: Remove useless output format
drm/rockchip: inno_hdmi: Remove useless colorimetry
drm/rockchip: inno_hdmi: Remove useless enum
drm/rockchip: inno_hdmi: Remove tmds rate from structure
drm/rockchip: inno_hdmi: Remove useless coeff_csc matrix
drm/rockchip: inno_hdmi: Remove useless mode_valid
drm/rockchip: inno_hdmi: Move infoframe disable to separate function
drm/rockchip: inno_hdmi: Create mask retrieval functions
drm/rockchip: inno_hdmi: Switch to infoframe type
drm/rockchip: inno_hdmi: Remove unused drm device pointer
drm/rockchip: inno_hdmi: Switch to HDMI connector
drm/sun4i: hdmi: Convert encoder to atomic
drm/sun4i: hdmi: Move mode_set into enable
drm/sun4i: hdmi: Switch to container_of_const
drm/sun4i: hdmi: Consolidate atomic_check and mode_valid
drm/sun4i: hdmi: Switch to HDMI connector

Documentation/gpu/kms-properties.csv | 1 -
drivers/gpu/drm/Kconfig | 1 +
drivers/gpu/drm/drm_atomic.c | 11 +
drivers/gpu/drm/drm_atomic_state_helper.c | 659 ++++++++
drivers/gpu/drm/drm_atomic_uapi.c | 4 +
drivers/gpu/drm/drm_connector.c | 249 +++
drivers/gpu/drm/drm_debugfs.c | 110 ++
drivers/gpu/drm/rockchip/inno_hdmi.c | 409 ++---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 203 ++-
drivers/gpu/drm/tests/Makefile | 1 +
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 1728 ++++++++++++++++++++
drivers/gpu/drm/tests/drm_connector_test.c | 1345 ++++++++++++++-
drivers/gpu/drm/tests/drm_kunit_edid.h | 482 ++++++
drivers/gpu/drm/tests/drm_kunit_helpers.c | 150 ++
drivers/gpu/drm/vc4/tests/vc4_mock.c | 6 +-
drivers/gpu/drm/vc4/tests/vc4_mock.h | 9 +-
drivers/gpu/drm/vc4/tests/vc4_mock_plane.c | 44 +-
drivers/gpu/drm/vc4/vc4_hdmi.c | 624 +------
drivers/gpu/drm/vc4/vc4_hdmi.h | 44 +-
drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 6 +-
include/drm/drm_atomic_state_helper.h | 12 +
include/drm/drm_connector.h | 257 +++
include/drm/drm_kunit_helpers.h | 23 +
23 files changed, 5389 insertions(+), 989 deletions(-)
---
base-commit: 815d8b0425ad1164e45953ac3d56a9f6f63792cc
change-id: 20230814-kms-hdmi-connector-state-616787e67927

Best regards,
--
Maxime Ripard <[email protected]>


2023-11-28 10:24:48

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 02/45] drm/tests: helpers: Add atomic helpers

The mock device we were creating was missing any of the driver-wide
helpers. That was fine before since we weren't testing the atomic state
path, but we're going to start, so let's use the default
implementations.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/tests/drm_kunit_helpers.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c b/drivers/gpu/drm/tests/drm_kunit_helpers.c
index bccb33b900f3..272a3ba46d60 100644
--- a/drivers/gpu/drm/tests/drm_kunit_helpers.c
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0

#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_kunit_helpers.h>
#include <drm/drm_managed.h>
@@ -13,6 +14,8 @@
#define KUNIT_DEVICE_NAME "drm-kunit-mock-device"

static const struct drm_mode_config_funcs drm_mode_config_funcs = {
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = drm_atomic_helper_commit,
};

static int fake_probe(struct platform_device *pdev)

--
2.41.0

2023-11-28 10:24:55

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 03/45] drm/tests: Add helper to create mock plane

We're going to need a full-blown, functional, KMS device to test more
components of the atomic modesetting infrastructure.

Let's add a new helper to create a dumb, mocked, primary plane. By
default, it will create a linear XRGB8888 plane, using the default
helpers.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/tests/drm_kunit_helpers.c | 85 +++++++++++++++++++++++++++++++
include/drm/drm_kunit_helpers.h | 11 ++++
2 files changed, 96 insertions(+)

diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c b/drivers/gpu/drm/tests/drm_kunit_helpers.c
index 272a3ba46d60..4a1559424396 100644
--- a/drivers/gpu/drm/tests/drm_kunit_helpers.c
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -3,6 +3,7 @@
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
+#include <drm/drm_fourcc.h>
#include <drm/drm_kunit_helpers.h>
#include <drm/drm_managed.h>

@@ -236,5 +237,89 @@ drm_kunit_helper_atomic_state_alloc(struct kunit *test,
}
EXPORT_SYMBOL_GPL(drm_kunit_helper_atomic_state_alloc);

+static const uint32_t default_plane_formats[] = {
+ DRM_FORMAT_XRGB8888,
+};
+
+static const uint64_t default_plane_modifiers[] = {
+ DRM_FORMAT_MOD_LINEAR,
+ DRM_FORMAT_MOD_INVALID
+};
+
+static const struct drm_plane_helper_funcs default_plane_helper_funcs = {
+};
+
+static const struct drm_plane_funcs default_plane_funcs = {
+ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+ .reset = drm_atomic_helper_plane_reset,
+};
+
+/**
+ * drm_kunit_helper_create_primary_plane - Creates a mock primary plane for a KUnit test
+ * @test: The test context object
+ * @drm: The device to alloc the plane for
+ * @funcs: Callbacks for the new plane. Optional.
+ * @helper_funcs: Helpers callbacks for the new plane. Optional.
+ * @formats: array of supported formats (DRM_FORMAT\_\*). Optional.
+ * @format_count: number of elements in @formats
+ * @modifiers: array of struct drm_format modifiers terminated by
+ * DRM_FORMAT_MOD_INVALID. Optional.
+ *
+ * This allocates and initializes a mock struct &drm_plane meant to be
+ * part of a mock device for a KUnit test.
+ *
+ * Resources will be cleaned up automatically.
+ *
+ * @funcs will default to the default helpers implementations.
+ * @helper_funcs will default to an empty implementation. @formats will
+ * default to XRGB8888 only. @modifiers will default to a linear
+ * modifier only.
+ *
+ * Returns:
+ * A pointer to the new plane, or an ERR_PTR() otherwise.
+ */
+struct drm_plane *
+drm_kunit_helper_create_primary_plane(struct kunit *test,
+ struct drm_device *drm,
+ const struct drm_plane_funcs *funcs,
+ const struct drm_plane_helper_funcs *helper_funcs,
+ const uint32_t *formats,
+ unsigned int num_formats,
+ const uint64_t *modifiers)
+{
+ struct drm_plane *plane;
+
+ if (!funcs)
+ funcs = &default_plane_funcs;
+
+ if (!helper_funcs)
+ helper_funcs = &default_plane_helper_funcs;
+
+ if (!formats || !num_formats) {
+ formats = default_plane_formats;
+ num_formats = ARRAY_SIZE(default_plane_formats);
+ }
+
+ if (!modifiers)
+ modifiers = default_plane_modifiers;
+
+ plane = __drmm_universal_plane_alloc(drm,
+ sizeof(struct drm_plane), 0,
+ 0,
+ funcs,
+ formats,
+ num_formats,
+ default_plane_modifiers,
+ DRM_PLANE_TYPE_PRIMARY,
+ NULL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, plane);
+
+ drm_plane_helper_add(plane, helper_funcs);
+
+ return plane;
+}
+EXPORT_SYMBOL_GPL(drm_kunit_helper_create_primary_plane);
+
MODULE_AUTHOR("Maxime Ripard <[email protected]>");
MODULE_LICENSE("GPL");
diff --git a/include/drm/drm_kunit_helpers.h b/include/drm/drm_kunit_helpers.h
index 3ae19892229d..38667d624aa8 100644
--- a/include/drm/drm_kunit_helpers.h
+++ b/include/drm/drm_kunit_helpers.h
@@ -10,6 +10,8 @@
#include <kunit/test.h>

struct drm_device;
+struct drm_plane_funcs;
+struct drm_plane_helper_funcs;
struct kunit;

struct device *drm_kunit_helper_alloc_device(struct kunit *test);
@@ -99,4 +101,13 @@ drm_kunit_helper_atomic_state_alloc(struct kunit *test,
struct drm_device *drm,
struct drm_modeset_acquire_ctx *ctx);

+struct drm_plane *
+drm_kunit_helper_create_primary_plane(struct kunit *test,
+ struct drm_device *drm,
+ const struct drm_plane_funcs *funcs,
+ const struct drm_plane_helper_funcs *helper_funcs,
+ const uint32_t *formats,
+ unsigned int num_formats,
+ const uint64_t *modifiers);
+
#endif // DRM_KUNIT_HELPERS_H_

--
2.41.0

2023-11-28 10:24:57

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 04/45] drm/tests: Add helper to create mock crtc

We're going to need a full-blown, functional, KMS device to test more
components of the atomic modesetting infrastructure.

Let's add a new helper to create a dumb, mocked, CRTC. By default it
will create a CRTC relying only on the default helpers, but drivers are
free to deviate from that.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/tests/drm_kunit_helpers.c | 62 +++++++++++++++++++++++++++++++
include/drm/drm_kunit_helpers.h | 10 +++++
2 files changed, 72 insertions(+)

diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c b/drivers/gpu/drm/tests/drm_kunit_helpers.c
index 4a1559424396..49c7b320679b 100644
--- a/drivers/gpu/drm/tests/drm_kunit_helpers.c
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -321,5 +321,67 @@ drm_kunit_helper_create_primary_plane(struct kunit *test,
}
EXPORT_SYMBOL_GPL(drm_kunit_helper_create_primary_plane);

+static const struct drm_crtc_helper_funcs default_crtc_helper_funcs = {
+};
+
+static const struct drm_crtc_funcs default_crtc_funcs = {
+ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+ .reset = drm_atomic_helper_crtc_reset,
+};
+
+/**
+ * drm_kunit_helper_create_crtc - Creates a mock CRTC for a KUnit test
+ * @test: The test context object
+ * @drm: The device to alloc the plane for
+ * @primary: Primary plane for CRTC
+ * @cursor: Cursor plane for CRTC. Optional.
+ * @funcs: Callbacks for the new plane. Optional.
+ * @helper_funcs: Helpers callbacks for the new plane. Optional.
+ *
+ * This allocates and initializes a mock struct &drm_crtc meant to be
+ * part of a mock device for a KUnit test.
+ *
+ * Resources will be cleaned up automatically.
+ *
+ * @funcs will default to the default helpers implementations.
+ * @helper_funcs will default to an empty implementation.
+ *
+ * Returns:
+ * A pointer to the new CRTC, or an ERR_PTR() otherwise.
+ */
+struct drm_crtc *
+drm_kunit_helper_create_crtc(struct kunit *test,
+ struct drm_device *drm,
+ struct drm_plane *primary,
+ struct drm_plane *cursor,
+ const struct drm_crtc_funcs *funcs,
+ const struct drm_crtc_helper_funcs *helper_funcs)
+{
+ struct drm_crtc *crtc;
+ int ret;
+
+ if (!funcs)
+ funcs = &default_crtc_funcs;
+
+ if (!helper_funcs)
+ helper_funcs = &default_crtc_helper_funcs;
+
+ crtc = drmm_kzalloc(drm, sizeof(*crtc), GFP_KERNEL);
+ KUNIT_ASSERT_NOT_NULL(test, crtc);
+
+ ret = drmm_crtc_init_with_planes(drm, crtc,
+ primary,
+ cursor,
+ funcs,
+ NULL);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ drm_crtc_helper_add(crtc, helper_funcs);
+
+ return crtc;
+}
+EXPORT_SYMBOL_GPL(drm_kunit_helper_create_crtc);
+
MODULE_AUTHOR("Maxime Ripard <[email protected]>");
MODULE_LICENSE("GPL");
diff --git a/include/drm/drm_kunit_helpers.h b/include/drm/drm_kunit_helpers.h
index 38667d624aa8..6e99627edf45 100644
--- a/include/drm/drm_kunit_helpers.h
+++ b/include/drm/drm_kunit_helpers.h
@@ -9,6 +9,8 @@

#include <kunit/test.h>

+struct drm_crtc_funcs;
+struct drm_crtc_helper_funcs;
struct drm_device;
struct drm_plane_funcs;
struct drm_plane_helper_funcs;
@@ -110,4 +112,12 @@ drm_kunit_helper_create_primary_plane(struct kunit *test,
unsigned int num_formats,
const uint64_t *modifiers);

+struct drm_crtc *
+drm_kunit_helper_create_crtc(struct kunit *test,
+ struct drm_device *drm,
+ struct drm_plane *primary,
+ struct drm_plane *cursor,
+ const struct drm_crtc_funcs *funcs,
+ const struct drm_crtc_helper_funcs *helper_funcs);
+
#endif // DRM_KUNIT_HELPERS_H_

--
2.41.0

2023-11-28 10:25:10

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

All the drm_connector_init variants take at least a pointer to the
device, connector and hooks implementation.

However, none of them check their value before dereferencing those
pointers which can lead to a NULL-pointer dereference if the author
isn't careful.

Let's test those pointers instead and error out if any is NULL.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_connector.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index b0516505f7ae..2f60755dccdd 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -229,6 +229,9 @@ static int __drm_connector_init(struct drm_device *dev,
struct ida *connector_ida =
&drm_connector_enum_list[connector_type].ida;

+ if (!dev || !connector || !funcs)
+ return -EINVAL;
+
WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
(!funcs->atomic_destroy_state ||
!funcs->atomic_duplicate_state));

--
2.41.0

2023-11-28 10:25:22

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 07/45] drm/connector: Introduce an HDMI connector initialization function

A lot of the various HDMI drivers duplicate some logic that depends on
the HDMI spec itself and not really a particular hardware
implementation.

Output BPC or format selection, infoframe generation are good examples
of such areas.

This creates a lot of boilerplate, with a lot of variations, which makes
it hard for userspace to rely on, and makes it difficult to get it right
for drivers.

In the next patches, we'll add a lot of infrastructure around the
drm_connector and drm_connector_state structures, which will allow to
abstract away the duplicated logic. This infrastructure comes with a few
requirements though, and thus we need a new initialization function.

Hopefully, this will make drivers simpler to handle, and their behaviour
more consistent.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_connector.c | 39 +++++++
drivers/gpu/drm/tests/drm_connector_test.c | 172 +++++++++++++++++++++++++++++
include/drm/drm_connector.h | 5 +
3 files changed, 216 insertions(+)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 2f60755dccdd..a87515897267 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -455,6 +455,45 @@ int drmm_connector_init(struct drm_device *dev,
}
EXPORT_SYMBOL(drmm_connector_init);

+/**
+ * drmm_connector_hdmi_init - Init a preallocated HDMI connector
+ * @dev: DRM device
+ * @connector: A pointer to the HDMI connector to init
+ * @funcs: callbacks for this connector
+ * @connector_type: user visible type of the connector
+ * @ddc: optional pointer to the associated ddc adapter
+ *
+ * Initialises a preallocated HDMI connector. Connectors can be
+ * subclassed as part of driver connector objects.
+ *
+ * Cleanup is automatically handled with a call to
+ * drm_connector_cleanup() in a DRM-managed action.
+ *
+ * The connector structure should be allocated with drmm_kzalloc().
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drmm_connector_hdmi_init(struct drm_device *dev,
+ struct drm_connector *connector,
+ const struct drm_connector_funcs *funcs,
+ int connector_type,
+ struct i2c_adapter *ddc)
+{
+ int ret;
+
+ if (!(connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+ connector_type == DRM_MODE_CONNECTOR_HDMIB))
+ return -EINVAL;
+
+ ret = drmm_connector_init(dev, connector, funcs, connector_type, ddc);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(drmm_connector_hdmi_init);
+
/**
* drm_connector_attach_edid_property - attach edid property.
* @connector: the connector
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
index 4951b5b121a2..780953d89d7c 100644
--- a/drivers/gpu/drm/tests/drm_connector_test.c
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -221,6 +221,177 @@ static struct kunit_suite drmm_connector_init_test_suite = {
.test_cases = drmm_connector_init_tests,
};

+/*
+ * Test that the registration of a bog standard connector works as
+ * expected and doesn't report any error.
+ */
+static void drm_test_connector_hdmi_init_valid(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector without a DDC adapter
+ * doesn't report any error.
+ */
+static void drm_test_connector_hdmi_init_null_ddc(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ NULL);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector without a DRM device fails.
+ */
+static void drm_test_connector_hdmi_init_null_device(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(NULL, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a NULL connector fails.
+ */
+static void drm_test_connector_hdmi_init_null_connector(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, NULL,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector without any callbacks
+ * fails.
+ */
+static void drm_test_connector_hdmi_init_null_funcs(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ NULL,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of an HDMI connector with an HDMI
+ * connector type succeeds.
+ */
+static void drm_test_connector_hdmi_init_type_valid(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ unsigned int connector_type = *(unsigned int *)test->param_value;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ connector_type,
+ &priv->ddc);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+}
+
+static const unsigned int drm_connector_hdmi_init_type_valid_tests[] = {
+ DRM_MODE_CONNECTOR_HDMIA,
+ DRM_MODE_CONNECTOR_HDMIB,
+};
+
+static void drm_connector_hdmi_init_type_desc(const unsigned int *type, char *desc)
+{
+ sprintf(desc, "%s", drm_get_connector_type_name(*type));
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_hdmi_init_type_valid,
+ drm_connector_hdmi_init_type_valid_tests,
+ drm_connector_hdmi_init_type_desc);
+
+/*
+ * Test that the registration of an HDMI connector with an !HDMI
+ * connector type fails.
+ */
+static void drm_test_connector_hdmi_init_type_invalid(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ unsigned int connector_type = *(unsigned int *)test->param_value;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ connector_type,
+ &priv->ddc);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+static const unsigned int drm_connector_hdmi_init_type_invalid_tests[] = {
+ DRM_MODE_CONNECTOR_Unknown,
+ DRM_MODE_CONNECTOR_VGA,
+ DRM_MODE_CONNECTOR_DVII,
+ DRM_MODE_CONNECTOR_DVID,
+ DRM_MODE_CONNECTOR_DVIA,
+ DRM_MODE_CONNECTOR_Composite,
+ DRM_MODE_CONNECTOR_SVIDEO,
+ DRM_MODE_CONNECTOR_LVDS,
+ DRM_MODE_CONNECTOR_Component,
+ DRM_MODE_CONNECTOR_9PinDIN,
+ DRM_MODE_CONNECTOR_DisplayPort,
+ DRM_MODE_CONNECTOR_TV,
+ DRM_MODE_CONNECTOR_eDP,
+ DRM_MODE_CONNECTOR_VIRTUAL,
+ DRM_MODE_CONNECTOR_DSI,
+ DRM_MODE_CONNECTOR_DPI,
+ DRM_MODE_CONNECTOR_WRITEBACK,
+ DRM_MODE_CONNECTOR_SPI,
+ DRM_MODE_CONNECTOR_USB,
+};
+
+KUNIT_ARRAY_PARAM(drm_connector_hdmi_init_type_invalid,
+ drm_connector_hdmi_init_type_invalid_tests,
+ drm_connector_hdmi_init_type_desc);
+
+static struct kunit_case drmm_connector_hdmi_init_tests[] = {
+ KUNIT_CASE(drm_test_connector_hdmi_init_valid),
+ KUNIT_CASE(drm_test_connector_hdmi_init_null_connector),
+ KUNIT_CASE(drm_test_connector_hdmi_init_null_ddc),
+ KUNIT_CASE(drm_test_connector_hdmi_init_null_device),
+ KUNIT_CASE(drm_test_connector_hdmi_init_null_funcs),
+ KUNIT_CASE_PARAM(drm_test_connector_hdmi_init_type_valid,
+ drm_connector_hdmi_init_type_valid_gen_params),
+ KUNIT_CASE_PARAM(drm_test_connector_hdmi_init_type_invalid,
+ drm_connector_hdmi_init_type_invalid_gen_params),
+ { }
+};
+
+static struct kunit_suite drmm_connector_hdmi_init_test_suite = {
+ .name = "drmm_connector_hdmi_init",
+ .init = drm_test_connector_init,
+ .test_cases = drmm_connector_hdmi_init_tests,
+};
+
struct drm_get_tv_mode_from_name_test {
const char *name;
enum drm_connector_tv_mode expected_mode;
@@ -285,6 +456,7 @@ static struct kunit_suite drm_get_tv_mode_from_name_test_suite = {
};

kunit_test_suites(
+ &drmm_connector_hdmi_init_test_suite,
&drmm_connector_init_test_suite,
&drm_get_tv_mode_from_name_test_suite
);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index fe88d7fc6b8f..4491c4c2fb6e 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1904,6 +1904,11 @@ int drmm_connector_init(struct drm_device *dev,
const struct drm_connector_funcs *funcs,
int connector_type,
struct i2c_adapter *ddc);
+int drmm_connector_hdmi_init(struct drm_device *dev,
+ struct drm_connector *connector,
+ const struct drm_connector_funcs *funcs,
+ int connector_type,
+ struct i2c_adapter *ddc);
void drm_connector_attach_edid_property(struct drm_connector *connector);
int drm_connector_register(struct drm_connector *connector);
void drm_connector_unregister(struct drm_connector *connector);

--
2.41.0

2023-11-28 10:26:30

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 08/45] drm/connector: hdmi: Create an HDMI sub-state

The next features we will need to share across drivers will need to
store some parameters for drivers to use, such as the selected output
format.

Let's create a new connector sub-state dedicated to HDMI controllers,
that will eventually store everything we need.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_atomic_state_helper.c | 35 +++++++++++++++++++++++++++++++
include/drm/drm_atomic_state_helper.h | 4 ++++
include/drm/drm_connector.h | 7 +++++++
3 files changed, 46 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 784e63d70a42..29cb64e9cf28 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -556,6 +556,22 @@ void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
}
EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);

+/**
+ * __drm_atomic_helper_connector_hdmi_reset() - Initializes all HDMI @drm_connector_state resources
+ * @connector: DRM connector
+ * @new_state: connector state to reset
+ *
+ * Initializes all HDMI resources from a @drm_connector_state without
+ * actually allocating it. This is useful for HDMI drivers, in
+ * combination with __drm_atomic_helper_connector_reset() or
+ * drm_atomic_helper_connector_reset().
+ */
+void __drm_atomic_helper_connector_hdmi_reset(struct drm_connector *connector,
+ struct drm_connector_state *new_state)
+{
+}
+EXPORT_SYMBOL(__drm_atomic_helper_connector_hdmi_reset);
+
/**
* drm_atomic_helper_connector_tv_check - Validate an analog TV connector state
* @connector: DRM Connector
@@ -605,6 +621,25 @@ int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
}
EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);

+/**
+ * drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
+ * @connector: DRM Connector
+ * @state: the DRM State object
+ *
+ * Provides a default connector state check handler for HDMI connectors.
+ * Checks that a desired connector update is valid, and updates various
+ * fields of derived state.
+ *
+ * RETURNS:
+ * Zero on success, or an errno code otherwise.
+ */
+int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
+ struct drm_atomic_state *state)
+{
+ return 0;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_hdmi_check);
+
/**
* __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
* @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index b9740edb2658..d59d2b3aef9a 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -71,7 +71,11 @@ void __drm_atomic_helper_connector_state_reset(struct drm_connector_state *conn_
void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
struct drm_connector_state *conn_state);
void drm_atomic_helper_connector_reset(struct drm_connector *connector);
+void __drm_atomic_helper_connector_hdmi_reset(struct drm_connector *connector,
+ struct drm_connector_state *new_state);
void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
+int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
+ struct drm_atomic_state *state);
int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
struct drm_atomic_state *state);
void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector *connector);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 4491c4c2fb6e..000a2a156619 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1031,6 +1031,13 @@ struct drm_connector_state {
* DRM blob property for HDR output metadata
*/
struct drm_property_blob *hdr_output_metadata;
+
+ /**
+ * @hdmi: HDMI-related variable and properties. Filled by
+ * @drm_atomic_helper_connector_hdmi_check().
+ */
+ struct {
+ } hdmi;
};

/**

--
2.41.0

2023-11-28 10:26:31

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 14/45] drm/connector: hdmi: Calculate TMDS character rate

Most HDMI drivers have some code to calculate the TMDS character rate,
usually to adjust an internal clock to match what the mode requires.

Since the TMDS character rates mostly depends on the resolution, whether
we need to repeat pixels or not, the bpc count and the format, we can
now derive it from the HDMI connector state that stores all those infos
and remove the duplication from drivers.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_atomic.c | 1 +
drivers/gpu/drm/drm_atomic_state_helper.c | 44 +++++
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 169 ++++++++++++++++
drivers/gpu/drm/tests/drm_kunit_edid.h | 216 +++++++++++++++++++++
include/drm/drm_connector.h | 5 +
5 files changed, 435 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 844a21451cb7..be6945ac6831 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1150,6 +1150,7 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
drm_printf(p, "\toutput_bpc=%u\n", state->hdmi.output_bpc);
drm_printf(p, "\toutput_format=%s\n",
drm_hdmi_connector_get_output_format_name(state->hdmi.output_format));
+ drm_printf(p, "\ttmds_char_rate=%llu\n", state->hdmi.tmds_char_rate);
}

if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index b2dbb0ba6afb..63069432c061 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -668,6 +668,41 @@ static bool hdmi_is_full_range(const struct drm_connector *connector,
return drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL ? true : false;
}

+static enum drm_mode_status
+hdmi_clock_valid(const struct drm_connector *connector,
+ const struct drm_display_mode *mode,
+ unsigned long long clock)
+{
+ const struct drm_display_info *info = &connector->display_info;
+
+ if (info->max_tmds_clock && clock > info->max_tmds_clock * 1000)
+ return MODE_CLOCK_HIGH;
+
+ return MODE_OK;
+}
+
+static int
+hdmi_compute_clock(const struct drm_connector *connector,
+ struct drm_connector_state *state,
+ const struct drm_display_mode *mode,
+ unsigned int bpc, enum hdmi_colorspace fmt)
+{
+ enum drm_mode_status status;
+ unsigned long long clock;
+
+ clock = drm_connector_hdmi_compute_mode_clock(mode, bpc, fmt);
+ if (!clock)
+ return -EINVAL;
+
+ status = hdmi_clock_valid(connector, mode, clock);
+ if (status != MODE_OK)
+ return -EINVAL;
+
+ state->hdmi.tmds_char_rate = clock;
+
+ return 0;
+}
+
/**
* drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
* @connector: DRM Connector
@@ -687,9 +722,18 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
drm_atomic_get_old_connector_state(state, connector);
struct drm_connector_state *new_state =
drm_atomic_get_new_connector_state(state, connector);
+ const struct drm_display_mode *mode =
+ connector_state_get_mode(new_state);
+ int ret;

new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);

+ ret = hdmi_compute_clock(connector, new_state, mode,
+ new_state->hdmi.output_bpc,
+ new_state->hdmi.output_format);
+ if (ret)
+ return ret;
+
if (old_state->hdmi.broadcast_rgb != new_state->hdmi.broadcast_rgb ||
old_state->hdmi.output_bpc != new_state->hdmi.output_bpc ||
old_state->hdmi.output_format != new_state->hdmi.output_format) {
diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
index 4e2ec436987b..d76fafb91025 100644
--- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
@@ -70,6 +70,9 @@ static int light_up_connector(struct kunit *test,
conn_state = drm_atomic_get_connector_state(state, connector);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);

+ conn_state->hdmi.output_bpc = connector->max_bpc;
+ conn_state->hdmi.output_format = HDMI_COLORSPACE_RGB;
+
ret = drm_atomic_set_crtc_for_connector(conn_state, crtc);
KUNIT_EXPECT_EQ(test, ret, 0);

@@ -813,6 +816,146 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
}

+/*
+ * Test that when doing a commit which would use RGB 8bpc, the TMDS
+ * clock rate stored in the connector state is equal to the mode clock
+ */
+static void drm_test_check_tmds_char_rate_rgb_8bpc(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1000);
+}
+
+/*
+ * Test that when doing a commit which would use RGB 10bpc, the TMDS
+ * clock rate stored in the connector state is equal to 1.25 times the
+ * mode pixel clock
+ */
+static void drm_test_check_tmds_char_rate_rgb_10bpc(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 10);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_bpc, 10);
+ KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1250);
+}
+
+/*
+ * Test that when doing a commit which would use RGB 12bpc, the TMDS
+ * clock rate stored in the connector state is equal to 1.5 times the
+ * mode pixel clock
+ */
+static void drm_test_check_tmds_char_rate_rgb_12bpc(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_bpc, 12);
+ KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1500);
+}
+
static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
@@ -824,6 +967,9 @@ static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
+ KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_8bpc),
+ KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_10bpc),
+ KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_12bpc),
/*
* TODO: We should have tests to check that a change in the
* format triggers a CRTC mode change just like we do for the
@@ -955,12 +1101,35 @@ static void drm_test_check_format_value(struct kunit *test)
KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
}

+/*
+ * Test that the value of the output format property out of reset is set
+ * to 0, and will be computed at atomic_check time.
+ */
+static void drm_test_check_tmds_char_value(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_connector_state *conn_state;
+ struct drm_connector *conn;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ conn_state = conn->state;
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, 0);
+}
+
static struct kunit_case drm_atomic_helper_connector_hdmi_reset_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_value),
KUNIT_CASE(drm_test_check_bpc_8_value),
KUNIT_CASE(drm_test_check_bpc_10_value),
KUNIT_CASE(drm_test_check_bpc_12_value),
KUNIT_CASE(drm_test_check_format_value),
+ KUNIT_CASE(drm_test_check_tmds_char_value),
{ }
};

diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.h b/drivers/gpu/drm/tests/drm_kunit_edid.h
index 2bba316de064..24f3377ef0f0 100644
--- a/drivers/gpu/drm/tests/drm_kunit_edid.h
+++ b/drivers/gpu/drm/tests/drm_kunit_edid.h
@@ -103,4 +103,220 @@ const unsigned char test_edid_hdmi_1080p_rgb_max_200mhz[] = {
0x00, 0x00, 0x00, 0xd0
};

+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 1a 00 00 00 00 00 00 00
+ * 00 00 00 20 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 7a
+ *
+ * 02 03 1b b1 e3 05 00 20 41 10 e2 00 ca 6d 03 0c
+ * 00 12 34 78 28 20 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a8
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ * EDID Structure Version & Revision: 1.3
+ * Vendor & Product Identification:
+ * Manufacturer: LNX
+ * Model: 42
+ * Made in: 2023
+ * Basic Display Parameters & Features:
+ * Digital display
+ * DFP 1.x compatible TMDS
+ * Maximum image size: 160 cm x 90 cm
+ * Gamma: 2.20
+ * Undefined display color type
+ * First detailed timing is the preferred timing
+ * Color Characteristics:
+ * Red : 0.0000, 0.0000
+ * Green: 0.0000, 0.0000
+ * Blue : 0.0000, 0.0000
+ * White: 0.0000, 0.0000
+ * Established Timings I & II:
+ * DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
+ * Standard Timings: none
+ * Detailed Timing Descriptors:
+ * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm)
+ * Hfront 88 Hsync 44 Hback 148 Hpol P
+ * Vfront 4 Vsync 5 Vback 36 Vpol P
+ * Display Product Name: 'Test EDID'
+ * Display Range Limits:
+ * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ * Dummy Descriptor:
+ * Extension blocks: 1
+ * Checksum: 0x7a
+ *
+ * ----------------
+ *
+ * Block 1, CTA-861 Extension Block:
+ * Revision: 3
+ * Underscans IT Video Formats by default
+ * Supports YCbCr 4:4:4
+ * Supports YCbCr 4:2:2
+ * Native detailed modes: 1
+ * Colorimetry Data Block:
+ * sRGB
+ * Video Data Block:
+ * VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz
+ * Video Capability Data Block:
+ * YCbCr quantization: Selectable (via AVI YQ)
+ * RGB quantization: Selectable (via AVI Q)
+ * PT scan behavior: No Data
+ * IT scan behavior: Always Underscanned
+ * CE scan behavior: Always Underscanned
+ * Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
+ * Source physical address: 1.2.3.4
+ * DC_48bit
+ * DC_36bit
+ * DC_30bit
+ * DC_Y444
+ * Maximum TMDS clock: 200 MHz
+ * Extended HDMI video details:
+ * Checksum: 0xa8 Unused space in Extension Block: 100 bytes
+ */
+const unsigned char test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz[] = {
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+ 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
+ 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+ 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+ 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+ 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+ 0x46, 0x1e, 0x46, 0x0f, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x7a, 0x02, 0x03, 0x1b, 0xb1,
+ 0xe3, 0x05, 0x00, 0x20, 0x41, 0x10, 0xe2, 0x00, 0xca, 0x6d, 0x03, 0x0c,
+ 0x00, 0x12, 0x34, 0x78, 0x28, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0xa8
+};
+
+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 0a 00 00 00 00 00 00 00
+ * 00 00 00 20 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 8a
+ *
+ * 02 03 1b b1 e3 05 00 20 41 10 e2 00 ca 6d 03 0c
+ * 00 12 34 78 44 20 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ * EDID Structure Version & Revision: 1.3
+ * Vendor & Product Identification:
+ * Manufacturer: LNX
+ * Model: 42
+ * Made in: 2023
+ * Basic Display Parameters & Features:
+ * Digital display
+ * DFP 1.x compatible TMDS
+ * Maximum image size: 160 cm x 90 cm
+ * Gamma: 2.20
+ * RGB color display
+ * First detailed timing is the preferred timing
+ * Color Characteristics:
+ * Red : 0.0000, 0.0000
+ * Green: 0.0000, 0.0000
+ * Blue : 0.0000, 0.0000
+ * White: 0.0000, 0.0000
+ * Established Timings I & II:
+ * DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
+ * Standard Timings: none
+ * Detailed Timing Descriptors:
+ * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm)
+ * Hfront 88 Hsync 44 Hback 148 Hpol P
+ * Vfront 4 Vsync 5 Vback 36 Vpol P
+ * Display Product Name: 'Test EDID'
+ * Display Range Limits:
+ * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ * Dummy Descriptor:
+ * Extension blocks: 1
+ * Checksum: 0x8a
+ *
+ * ----------------
+ *
+ * Block 1, CTA-861 Extension Block:
+ * Revision: 3
+ * Underscans IT Video Formats by default
+ * Supports YCbCr 4:4:4
+ * Supports YCbCr 4:2:2
+ * Native detailed modes: 1
+ * Colorimetry Data Block:
+ * sRGB
+ * Video Data Block:
+ * VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz
+ * Video Capability Data Block:
+ * YCbCr quantization: Selectable (via AVI YQ)
+ * RGB quantization: Selectable (via AVI Q)
+ * PT scan behavior: No Data
+ * IT scan behavior: Always Underscanned
+ * CE scan behavior: Always Underscanned
+ * Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
+ * Source physical address: 1.2.3.4
+ * DC_48bit
+ * DC_36bit
+ * DC_30bit
+ * DC_Y444
+ * Maximum TMDS clock: 340 MHz
+ * Extended HDMI video details:
+ * Checksum: 0x8c Unused space in Extension Block: 100 bytes
+ */
+const unsigned char test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz[] = {
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+ 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
+ 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+ 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+ 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+ 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+ 0x46, 0x1e, 0x46, 0x0f, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x8a, 0x02, 0x03, 0x1b, 0xb1,
+ 0xe3, 0x05, 0x00, 0x20, 0x41, 0x10, 0xe2, 0x00, 0xca, 0x6d, 0x03, 0x0c,
+ 0x00, 0x12, 0x34, 0x78, 0x44, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x8c
+};
+
#endif // DRM_KUNIT_EDID_H_
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 0cc5a8732664..59016d9c17f5 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1085,6 +1085,11 @@ struct drm_connector_state {
* @output_format: Pixel format to output in.
*/
enum hdmi_colorspace output_format;
+
+ /**
+ * @tmds_char_rate: TMDS Character Rate, in Hz.
+ */
+ unsigned long long tmds_char_rate;
} hdmi;
};


--
2.41.0

2023-11-28 10:26:32

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 06/45] drm/tests: connector: Add tests for drmm_connector_init

drmm_connector_init is the preferred function to initialize a
drm_connector structure. Let's add a bunch of unit tests for it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/tests/drm_connector_test.c | 219 ++++++++++++++++++++++++++++-
1 file changed, 218 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
index c66aa2dc8d9d..4951b5b121a2 100644
--- a/drivers/gpu/drm/tests/drm_connector_test.c
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -3,10 +3,224 @@
* Kunit test for drm_modes functions
*/

+#include <linux/i2c.h>
+
+#include <drm/drm_atomic_state_helper.h>
#include <drm/drm_connector.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_kunit_helpers.h>

#include <kunit/test.h>

+struct drm_connector_init_priv {
+ struct drm_device drm;
+ struct drm_connector connector;
+ struct i2c_adapter ddc;
+};
+
+static const struct drm_connector_funcs dummy_funcs = {
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .reset = drm_atomic_helper_connector_reset,
+};
+
+static int dummy_ddc_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ return num;
+}
+
+static u32 dummy_ddc_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm dummy_ddc_algorithm = {
+ .master_xfer = dummy_ddc_xfer,
+ .functionality = dummy_ddc_func,
+};
+
+static void i2c_del_adapter_wrapper(void *ptr)
+{
+ struct i2c_adapter *adap = ptr;
+
+ i2c_del_adapter(adap);
+}
+
+static int drm_test_connector_init(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv;
+ struct device *dev;
+ int ret;
+
+ dev = drm_kunit_helper_alloc_device(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dev);
+
+ priv = drm_kunit_helper_alloc_drm_device(test, dev,
+ struct drm_connector_init_priv, drm,
+ DRIVER_MODESET | DRIVER_ATOMIC);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv);
+
+ strscpy(priv->ddc.name, "dummy-connector-ddc", sizeof(priv->ddc.name));
+ priv->ddc.owner = THIS_MODULE;
+ priv->ddc.algo = &dummy_ddc_algorithm;
+ priv->ddc.dev.parent = dev;
+
+ ret = i2c_add_adapter(&priv->ddc);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ ret = kunit_add_action_or_reset(test, i2c_del_adapter_wrapper, &priv->ddc);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ test->priv = priv;
+ return 0;
+}
+
+/*
+ * Test that the registration of a bog standard connector works as
+ * expected and doesn't report any error.
+ */
+static void drm_test_drmm_connector_init(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector without a DDC adapter
+ * doesn't report any error.
+ */
+static void drm_test_drmm_connector_init_null_ddc(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ NULL);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector without a DRM device fails.
+ */
+static void drm_test_drmm_connector_init_null_device(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_init(NULL, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a NULL connector fails.
+ */
+static void drm_test_drmm_connector_init_null_connector(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_init(&priv->drm, NULL,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector without any callbacks
+ * fails.
+ */
+static void drm_test_drmm_connector_init_null_funcs(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_init(&priv->drm, &priv->connector,
+ NULL,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector succeeds for all possible
+ * connector types.
+ */
+static void drm_test_drmm_connector_init_type_valid(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ unsigned int connector_type = *(unsigned int *)test->param_value;
+ int ret;
+
+ ret = drmm_connector_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ connector_type,
+ &priv->ddc);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+}
+
+static const unsigned int drm_connector_init_type_valid_tests[] = {
+ DRM_MODE_CONNECTOR_Unknown,
+ DRM_MODE_CONNECTOR_VGA,
+ DRM_MODE_CONNECTOR_DVII,
+ DRM_MODE_CONNECTOR_DVID,
+ DRM_MODE_CONNECTOR_DVIA,
+ DRM_MODE_CONNECTOR_Composite,
+ DRM_MODE_CONNECTOR_SVIDEO,
+ DRM_MODE_CONNECTOR_LVDS,
+ DRM_MODE_CONNECTOR_Component,
+ DRM_MODE_CONNECTOR_9PinDIN,
+ DRM_MODE_CONNECTOR_DisplayPort,
+ DRM_MODE_CONNECTOR_HDMIA,
+ DRM_MODE_CONNECTOR_HDMIB,
+ DRM_MODE_CONNECTOR_TV,
+ DRM_MODE_CONNECTOR_eDP,
+ DRM_MODE_CONNECTOR_VIRTUAL,
+ DRM_MODE_CONNECTOR_DSI,
+ DRM_MODE_CONNECTOR_DPI,
+ DRM_MODE_CONNECTOR_WRITEBACK,
+ DRM_MODE_CONNECTOR_SPI,
+ DRM_MODE_CONNECTOR_USB,
+};
+
+static void drm_connector_init_type_desc(const unsigned int *type, char *desc)
+{
+ sprintf(desc, "%s", drm_get_connector_type_name(*type));
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_init_type_valid,
+ drm_connector_init_type_valid_tests,
+ drm_connector_init_type_desc);
+
+static struct kunit_case drmm_connector_init_tests[] = {
+ KUNIT_CASE(drm_test_drmm_connector_init),
+ KUNIT_CASE(drm_test_drmm_connector_init_null_connector),
+ KUNIT_CASE(drm_test_drmm_connector_init_null_ddc),
+ KUNIT_CASE(drm_test_drmm_connector_init_null_device),
+ KUNIT_CASE(drm_test_drmm_connector_init_null_funcs),
+ KUNIT_CASE_PARAM(drm_test_drmm_connector_init_type_valid,
+ drm_connector_init_type_valid_gen_params),
+ { }
+};
+
+static struct kunit_suite drmm_connector_init_test_suite = {
+ .name = "drmm_connector_init",
+ .init = drm_test_connector_init,
+ .test_cases = drmm_connector_init_tests,
+};
+
struct drm_get_tv_mode_from_name_test {
const char *name;
enum drm_connector_tv_mode expected_mode;
@@ -70,7 +284,10 @@ static struct kunit_suite drm_get_tv_mode_from_name_test_suite = {
.test_cases = drm_get_tv_mode_from_name_tests,
};

-kunit_test_suite(drm_get_tv_mode_from_name_test_suite);
+kunit_test_suites(
+ &drmm_connector_init_test_suite,
+ &drm_get_tv_mode_from_name_test_suite
+);

MODULE_AUTHOR("Maxime Ripard <[email protected]>");
MODULE_LICENSE("GPL");

--
2.41.0

2023-11-28 10:26:48

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 15/45] drm/connector: hdmi: Add custom hook to filter TMDS character rate

Most of the HDMI controllers have an upper TMDS character rate limit
they can't exceed. On "embedded"-grade display controllers, it will
typically be lower than what high-grade monitors can provide these days,
so drivers will filter the TMDS character rate based on the controller
capabilities.

To make that easier to handle for drivers, let's provide an optional
hook to be implemented by drivers so they can tell the HDMI controller
helpers if a given TMDS character rate is reachable for them or not.

This will then be useful to figure out the best format and bpc count for
a given mode.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_atomic_state_helper.c | 9 +++
drivers/gpu/drm/drm_connector.c | 7 +++
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 69 ++++++++++++++++++++++
drivers/gpu/drm/tests/drm_connector_test.c | 38 ++++++++++++
include/drm/drm_connector.h | 30 ++++++++++
5 files changed, 153 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 63069432c061..af3ece136040 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -673,11 +673,20 @@ hdmi_clock_valid(const struct drm_connector *connector,
const struct drm_display_mode *mode,
unsigned long long clock)
{
+ const struct drm_connector_hdmi_funcs *funcs = connector->hdmi.funcs;
const struct drm_display_info *info = &connector->display_info;

if (info->max_tmds_clock && clock > info->max_tmds_clock * 1000)
return MODE_CLOCK_HIGH;

+ if (funcs && funcs->tmds_char_rate_valid) {
+ enum drm_mode_status status;
+
+ status = funcs->tmds_char_rate_valid(connector, mode, clock);
+ if (status != MODE_OK)
+ return status;
+ }
+
return MODE_OK;
}

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 5eefeb868dbb..1073ab2f78bc 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -460,6 +460,7 @@ EXPORT_SYMBOL(drmm_connector_init);
* @dev: DRM device
* @connector: A pointer to the HDMI connector to init
* @funcs: callbacks for this connector
+ * @hdmi_funcs: HDMI-related callbacks for this connector
* @connector_type: user visible type of the connector
* @ddc: optional pointer to the associated ddc adapter
* @supported_formats: Bitmask of @hdmi_colorspace listing supported output formats
@@ -479,6 +480,7 @@ EXPORT_SYMBOL(drmm_connector_init);
int drmm_connector_hdmi_init(struct drm_device *dev,
struct drm_connector *connector,
const struct drm_connector_funcs *funcs,
+ const struct drm_connector_hdmi_funcs *hdmi_funcs,
int connector_type,
struct i2c_adapter *ddc,
unsigned long supported_formats,
@@ -490,6 +492,9 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
connector_type == DRM_MODE_CONNECTOR_HDMIB))
return -EINVAL;

+ if (!hdmi_funcs)
+ return -EINVAL;
+
if (!supported_formats || !(supported_formats & BIT(HDMI_COLORSPACE_RGB)))
return -EINVAL;

@@ -515,6 +520,8 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
if (max_bpc > 8)
drm_connector_attach_hdr_output_metadata_property(connector);

+ connector->hdmi.funcs = hdmi_funcs;
+
return 0;
}
EXPORT_SYMBOL(drmm_connector_hdmi_init);
diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
index d76fafb91025..e7dbdd4a4e7f 100644
--- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
@@ -110,6 +110,21 @@ static int set_connector_edid(struct kunit *test, struct drm_connector *connecto
return 0;
}

+static const struct drm_connector_hdmi_funcs dummy_connector_hdmi_funcs = {
+};
+
+static enum drm_mode_status
+reject_connector_tmds_char_rate_valid(const struct drm_connector *connector,
+ const struct drm_display_mode *mode,
+ unsigned long long tmds_rate)
+{
+ return MODE_BAD;
+}
+
+static const struct drm_connector_hdmi_funcs reject_connector_hdmi_funcs = {
+ .tmds_char_rate_valid = reject_connector_tmds_char_rate_valid,
+};
+
static int dummy_connector_get_modes(struct drm_connector *connector)
{
struct drm_atomic_helper_connector_hdmi_priv *priv =
@@ -192,6 +207,7 @@ drm_atomic_helper_connector_hdmi_init(struct kunit *test,
conn = &priv->connector;
ret = drmm_connector_hdmi_init(drm, conn,
&dummy_connector_funcs,
+ &dummy_connector_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
NULL,
formats,
@@ -956,6 +972,58 @@ static void drm_test_check_tmds_char_rate_rgb_12bpc(struct kunit *test)
KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1500);
}

+/*
+ * Test that if we filter a rate through our hook, it's indeed rejected
+ * by the whole atomic_check logic.
+ *
+ * We do so by first doing a commit on the pipeline to make sure that it
+ * works, change the HDMI helpers pointer, and then try the same commit
+ * again to see if it fails as it should.
+ */
+static void drm_test_check_hdmi_funcs_reject_rate(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *preferred;
+ struct drm_crtc_state *crtc_state;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ conn = &priv->connector;
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ /* You shouldn't be doing that at home. */
+ conn->hdmi.funcs = &reject_connector_hdmi_funcs;
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
+
+ crtc_state->connectors_changed = true;
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
@@ -965,6 +1033,7 @@ static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode_vic_1),
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
+ KUNIT_CASE(drm_test_check_hdmi_funcs_reject_rate),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_8bpc),
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
index 5262118cde85..493cbda9d5db 100644
--- a/drivers/gpu/drm/tests/drm_connector_test.c
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -22,6 +22,9 @@ struct drm_connector_init_priv {
struct i2c_adapter ddc;
};

+static const struct drm_connector_hdmi_funcs dummy_hdmi_funcs = {
+};
+
static const struct drm_connector_funcs dummy_funcs = {
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
@@ -236,6 +239,7 @@ static void drm_test_connector_hdmi_init_valid(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -254,6 +258,7 @@ static void drm_test_connector_hdmi_init_null_ddc(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
NULL,
BIT(HDMI_COLORSPACE_RGB),
@@ -271,6 +276,7 @@ static void drm_test_connector_hdmi_init_null_device(struct kunit *test)

ret = drmm_connector_hdmi_init(NULL, &priv->connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -288,6 +294,7 @@ static void drm_test_connector_hdmi_init_null_connector(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, NULL,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -305,6 +312,26 @@ static void drm_test_connector_hdmi_init_null_funcs(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ NULL,
+ &dummy_hdmi_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector without any HDMI callbacks
+ * fails.
+ */
+static void drm_test_connector_hdmi_init_null_hdmi_funcs(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
NULL,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
@@ -324,6 +351,7 @@ static void drm_test_connector_hdmi_init_bpc_invalid(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -342,6 +370,7 @@ static void drm_test_connector_hdmi_init_bpc_null(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -364,6 +393,7 @@ static void drm_test_connector_hdmi_init_bpc_8(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -398,6 +428,7 @@ static void drm_test_connector_hdmi_init_bpc_10(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -432,6 +463,7 @@ static void drm_test_connector_hdmi_init_bpc_12(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -462,6 +494,7 @@ static void drm_test_connector_hdmi_init_formats_empty(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
0,
@@ -480,6 +513,7 @@ static void drm_test_connector_hdmi_init_formats_no_rgb(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_YUV422),
@@ -499,6 +533,7 @@ static void drm_test_connector_hdmi_init_type_valid(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
connector_type,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -532,6 +567,7 @@ static void drm_test_connector_hdmi_init_type_invalid(struct kunit *test)

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
connector_type,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
@@ -578,6 +614,7 @@ static struct kunit_case drmm_connector_hdmi_init_tests[] = {
KUNIT_CASE(drm_test_connector_hdmi_init_null_ddc),
KUNIT_CASE(drm_test_connector_hdmi_init_null_device),
KUNIT_CASE(drm_test_connector_hdmi_init_null_funcs),
+ KUNIT_CASE(drm_test_connector_hdmi_init_null_hdmi_funcs),
KUNIT_CASE_PARAM(drm_test_connector_hdmi_init_type_valid,
drm_connector_hdmi_init_type_valid_gen_params),
KUNIT_CASE_PARAM(drm_test_connector_hdmi_init_type_invalid,
@@ -799,6 +836,7 @@ static void drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector(

ret = drmm_connector_hdmi_init(&priv->drm, connector,
&dummy_funcs,
+ &dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
BIT(HDMI_COLORSPACE_RGB),
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 59016d9c17f5..3eaf4d54364d 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1093,6 +1093,30 @@ struct drm_connector_state {
} hdmi;
};

+/**
+ * struct drm_connector_hdmi_funcs - drm_hdmi_connector control functions
+ */
+struct drm_connector_hdmi_funcs {
+ /**
+ * @tmds_char_rate_valid:
+ *
+ * This callback is invoked at atomic_check time to figure out
+ * whether a particular TMDS character rate is supported by the
+ * driver.
+ *
+ * The @tmds_char_rate_valid callback is optional.
+ *
+ * Returns:
+ *
+ * Either &drm_mode_status.MODE_OK or one of the failure reasons
+ * in &enum drm_mode_status.
+ */
+ enum drm_mode_status
+ (*tmds_char_rate_valid)(const struct drm_connector *connector,
+ const struct drm_display_mode *mode,
+ unsigned long long tmds_rate);
+};
+
/**
* struct drm_connector_funcs - control connectors on a given device
*
@@ -1967,6 +1991,11 @@ struct drm_connector {
* supported by the controller.
*/
unsigned long supported_formats;
+
+ /**
+ * @funcs: HDMI connector Control Functions
+ */
+ const struct drm_connector_hdmi_funcs *funcs;
} hdmi;
};

@@ -1989,6 +2018,7 @@ int drmm_connector_init(struct drm_device *dev,
int drmm_connector_hdmi_init(struct drm_device *dev,
struct drm_connector *connector,
const struct drm_connector_funcs *funcs,
+ const struct drm_connector_hdmi_funcs *hdmi_funcs,
int connector_type,
struct i2c_adapter *ddc,
unsigned long supported_formats,

--
2.41.0

2023-11-28 10:26:48

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 12/45] drm/connector: hdmi: Add support for output format

Just like BPC, we'll add support for automatic selection of the output
format for HDMI connectors.

Let's add the needed defaults and fields for now.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_atomic.c | 2 +
drivers/gpu/drm/drm_atomic_state_helper.c | 3 +-
drivers/gpu/drm/drm_connector.c | 31 ++++++
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 90 ++++++++++++++---
drivers/gpu/drm/tests/drm_connector_test.c | 112 ++++++++++++++++++++-
include/drm/drm_connector.h | 19 ++++
6 files changed, 241 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 67554f68f368..844a21451cb7 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1148,6 +1148,8 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
drm_hdmi_connector_get_broadcast_rgb_name(state->hdmi.broadcast_rgb));
drm_printf(p, "\tis_full_range=%c\n", state->hdmi.is_full_range ? 'y' : 'n');
drm_printf(p, "\toutput_bpc=%u\n", state->hdmi.output_bpc);
+ drm_printf(p, "\toutput_format=%s\n",
+ drm_hdmi_connector_get_output_format_name(state->hdmi.output_format));
}

if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 4e6ef58562c3..b2dbb0ba6afb 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -691,7 +691,8 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);

if (old_state->hdmi.broadcast_rgb != new_state->hdmi.broadcast_rgb ||
- old_state->hdmi.output_bpc != new_state->hdmi.output_bpc) {
+ old_state->hdmi.output_bpc != new_state->hdmi.output_bpc ||
+ old_state->hdmi.output_format != new_state->hdmi.output_format) {
struct drm_crtc *crtc = new_state->crtc;
struct drm_crtc_state *crtc_state;

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 3e7453ed9413..e465109f131b 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -462,6 +462,7 @@ EXPORT_SYMBOL(drmm_connector_init);
* @funcs: callbacks for this connector
* @connector_type: user visible type of the connector
* @ddc: optional pointer to the associated ddc adapter
+ * @supported_formats: Bitmask of @hdmi_colorspace listing supported output formats
* @max_bpc: Maximum bits per char the HDMI connector supports
*
* Initialises a preallocated HDMI connector. Connectors can be
@@ -480,6 +481,7 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
const struct drm_connector_funcs *funcs,
int connector_type,
struct i2c_adapter *ddc,
+ unsigned long supported_formats,
unsigned int max_bpc)
{
int ret;
@@ -488,6 +490,9 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
connector_type == DRM_MODE_CONNECTOR_HDMIB))
return -EINVAL;

+ if (!supported_formats || !(supported_formats & BIT(HDMI_COLORSPACE_RGB)))
+ return -EINVAL;
+
if (!(max_bpc == 8 || max_bpc == 10 || max_bpc == 12))
return -EINVAL;

@@ -495,6 +500,8 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
if (ret)
return ret;

+ connector->hdmi.supported_formats = supported_formats;
+
/*
* drm_connector_attach_max_bpc_property() requires the
* connector to have a state.
@@ -1227,6 +1234,30 @@ drm_hdmi_connector_get_broadcast_rgb_name(enum drm_hdmi_broadcast_rgb broadcast_
}
EXPORT_SYMBOL(drm_hdmi_connector_get_broadcast_rgb_name);

+static const char * const output_format_str[] = {
+ [HDMI_COLORSPACE_RGB] = "RGB",
+ [HDMI_COLORSPACE_YUV420] = "YUV 4:2:0",
+ [HDMI_COLORSPACE_YUV422] = "YUV 4:2:2",
+ [HDMI_COLORSPACE_YUV444] = "YUV 4:4:4",
+};
+
+/*
+ * drm_hdmi_connector_get_output_format_name() - Return a string for HDMI connector output format
+ * @fmt: Output format to compute name of
+ *
+ * Returns: the name of the output format, or NULL if the type is not
+ * valid.
+ */
+const char *
+drm_hdmi_connector_get_output_format_name(enum hdmi_colorspace fmt)
+{
+ if (fmt >= ARRAY_SIZE(output_format_str))
+ return NULL;
+
+ return output_format_str[fmt];
+}
+EXPORT_SYMBOL(drm_hdmi_connector_get_output_format_name);
+
/**
* DOC: standard connector properties
*
diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
index a1b0e6914cf8..4e2ec436987b 100644
--- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
@@ -147,6 +147,7 @@ static const struct drm_connector_funcs dummy_connector_funcs = {
static
struct drm_atomic_helper_connector_hdmi_priv *
drm_atomic_helper_connector_hdmi_init(struct kunit *test,
+ unsigned int formats,
unsigned int max_bpc)
{
struct drm_atomic_helper_connector_hdmi_priv *priv;
@@ -190,6 +191,7 @@ drm_atomic_helper_connector_hdmi_init(struct kunit *test,
&dummy_connector_funcs,
DRM_MODE_CONNECTOR_HDMIA,
NULL,
+ formats,
max_bpc);
KUNIT_ASSERT_EQ(test, ret, 0);

@@ -225,7 +227,9 @@ static void drm_test_check_broadcast_rgb_crtc_mode_changed(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

ctx = drm_kunit_helper_acquire_ctx_alloc(test);
@@ -286,7 +290,9 @@ static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *tes
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

ctx = drm_kunit_helper_acquire_ctx_alloc(test);
@@ -347,7 +353,9 @@ static void drm_test_check_broadcast_rgb_auto_cea_mode(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -401,7 +409,9 @@ static void drm_test_check_broadcast_rgb_auto_cea_mode_vic_1(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -454,7 +464,9 @@ static void drm_test_check_broadcast_rgb_full_cea_mode(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -510,7 +522,9 @@ static void drm_test_check_broadcast_rgb_full_cea_mode_vic_1(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -565,7 +579,9 @@ static void drm_test_check_broadcast_rgb_limited_cea_mode(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -621,7 +637,9 @@ static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *te
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -678,7 +696,9 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 10);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 10);
KUNIT_ASSERT_NOT_NULL(test, priv);

ctx = drm_kunit_helper_acquire_ctx_alloc(test);
@@ -745,7 +765,9 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test, 10);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 10);
KUNIT_ASSERT_NOT_NULL(test, priv);

ctx = drm_kunit_helper_acquire_ctx_alloc(test);
@@ -802,6 +824,15 @@ static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
+ /*
+ * TODO: We should have tests to check that a change in the
+ * format triggers a CRTC mode change just like we do for the
+ * RGB Quantization and BPC.
+ *
+ * However, we don't have any way to control which format gets
+ * picked up aside from changing the BPC or mode which would
+ * already trigger a mode change.
+ */
{ }
};

@@ -820,7 +851,9 @@ static void drm_test_check_broadcast_rgb_value(struct kunit *test)
struct drm_connector_state *conn_state;
struct drm_connector *conn;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -840,7 +873,9 @@ static void drm_test_check_bpc_8_value(struct kunit *test)
struct drm_connector_state *conn_state;
struct drm_connector *conn;

- priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -862,7 +897,9 @@ static void drm_test_check_bpc_10_value(struct kunit *test)
struct drm_connector_state *conn_state;
struct drm_connector *conn;

- priv = drm_atomic_helper_connector_hdmi_init(test, 10);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 10);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -884,7 +921,9 @@ static void drm_test_check_bpc_12_value(struct kunit *test)
struct drm_connector_state *conn_state;
struct drm_connector *conn;

- priv = drm_atomic_helper_connector_hdmi_init(test, 12);
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 12);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -894,11 +933,34 @@ static void drm_test_check_bpc_12_value(struct kunit *test)
KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 0);
}

+/*
+ * Test that the value of the output format property out of reset is set
+ * to RGB, even if the driver supports more than that.
+ */
+static void drm_test_check_format_value(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_connector_state *conn_state;
+ struct drm_connector *conn;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 8);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ conn_state = conn->state;
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
static struct kunit_case drm_atomic_helper_connector_hdmi_reset_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_value),
KUNIT_CASE(drm_test_check_bpc_8_value),
KUNIT_CASE(drm_test_check_bpc_10_value),
KUNIT_CASE(drm_test_check_bpc_12_value),
+ KUNIT_CASE(drm_test_check_format_value),
{ }
};

diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
index 232efb6fb235..502b7f9c1151 100644
--- a/drivers/gpu/drm/tests/drm_connector_test.c
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -236,6 +236,7 @@ static void drm_test_connector_hdmi_init_valid(struct kunit *test)
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
8);
KUNIT_EXPECT_EQ(test, ret, 0);
}
@@ -253,6 +254,7 @@ static void drm_test_connector_hdmi_init_null_ddc(struct kunit *test)
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
NULL,
+ BIT(HDMI_COLORSPACE_RGB),
8);
KUNIT_EXPECT_EQ(test, ret, 0);
}
@@ -269,6 +271,7 @@ static void drm_test_connector_hdmi_init_null_device(struct kunit *test)
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
8);
KUNIT_EXPECT_LT(test, ret, 0);
}
@@ -285,6 +288,7 @@ static void drm_test_connector_hdmi_init_null_connector(struct kunit *test)
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
8);
KUNIT_EXPECT_LT(test, ret, 0);
}
@@ -302,6 +306,7 @@ static void drm_test_connector_hdmi_init_null_funcs(struct kunit *test)
NULL,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
8);
KUNIT_EXPECT_LT(test, ret, 0);
}
@@ -319,6 +324,7 @@ static void drm_test_connector_hdmi_init_bpc_invalid(struct kunit *test)
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
9);
KUNIT_EXPECT_LT(test, ret, 0);
}
@@ -336,6 +342,7 @@ static void drm_test_connector_hdmi_init_bpc_null(struct kunit *test)
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
0);
KUNIT_EXPECT_LT(test, ret, 0);
}
@@ -357,6 +364,7 @@ static void drm_test_connector_hdmi_init_bpc_8(struct kunit *test)
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
8);
KUNIT_EXPECT_EQ(test, ret, 0);

@@ -390,6 +398,7 @@ static void drm_test_connector_hdmi_init_bpc_10(struct kunit *test)
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
10);
KUNIT_EXPECT_EQ(test, ret, 0);

@@ -423,6 +432,7 @@ static void drm_test_connector_hdmi_init_bpc_12(struct kunit *test)
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
12);
KUNIT_EXPECT_EQ(test, ret, 0);

@@ -439,6 +449,42 @@ static void drm_test_connector_hdmi_init_bpc_12(struct kunit *test)
KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
}

+/*
+ * Test that the registration of an HDMI connector with no supported
+ * format fails.
+ */
+static void drm_test_connector_hdmi_init_formats_empty(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ 0,
+ 8);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of an HDMI connector not listing RGB as a
+ * supported format fails.
+ */
+static void drm_test_connector_hdmi_init_formats_no_rgb(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_YUV422),
+ 8);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
/*
* Test that the registration of an HDMI connector with an HDMI
* connector type succeeds.
@@ -453,6 +499,7 @@ static void drm_test_connector_hdmi_init_type_valid(struct kunit *test)
&dummy_funcs,
connector_type,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
8);
KUNIT_EXPECT_EQ(test, ret, 0);
}
@@ -485,6 +532,7 @@ static void drm_test_connector_hdmi_init_type_invalid(struct kunit *test)
&dummy_funcs,
connector_type,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
8);
KUNIT_EXPECT_LT(test, ret, 0);
}
@@ -522,6 +570,8 @@ static struct kunit_case drmm_connector_hdmi_init_tests[] = {
KUNIT_CASE(drm_test_connector_hdmi_init_bpc_12),
KUNIT_CASE(drm_test_connector_hdmi_init_bpc_invalid),
KUNIT_CASE(drm_test_connector_hdmi_init_bpc_null),
+ KUNIT_CASE(drm_test_connector_hdmi_init_formats_empty),
+ KUNIT_CASE(drm_test_connector_hdmi_init_formats_no_rgb),
KUNIT_CASE(drm_test_connector_hdmi_init_null_connector),
KUNIT_CASE(drm_test_connector_hdmi_init_null_ddc),
KUNIT_CASE(drm_test_connector_hdmi_init_null_device),
@@ -659,6 +709,64 @@ static struct kunit_suite drm_hdmi_connector_get_broadcast_rgb_name_test_suite =
.test_cases = drm_hdmi_connector_get_broadcast_rgb_name_tests,
};

+struct drm_hdmi_connector_get_output_format_name_test {
+ unsigned int kind;
+ const char *expected_name;
+};
+
+#define OUTPUT_FORMAT_TEST(_kind, _name) \
+ { \
+ .kind = _kind, \
+ .expected_name = _name, \
+ }
+
+static void drm_test_drm_hdmi_connector_get_output_format_name(struct kunit *test)
+{
+ const struct drm_hdmi_connector_get_output_format_name_test *params =
+ test->param_value;
+
+ KUNIT_EXPECT_STREQ(test,
+ drm_hdmi_connector_get_output_format_name(params->kind),
+ params->expected_name);
+}
+
+static const
+struct drm_hdmi_connector_get_output_format_name_test
+drm_hdmi_connector_get_output_format_name_valid_tests[] = {
+ OUTPUT_FORMAT_TEST(HDMI_COLORSPACE_RGB, "RGB"),
+ OUTPUT_FORMAT_TEST(HDMI_COLORSPACE_YUV420, "YUV 4:2:0"),
+ OUTPUT_FORMAT_TEST(HDMI_COLORSPACE_YUV422, "YUV 4:2:2"),
+ OUTPUT_FORMAT_TEST(HDMI_COLORSPACE_YUV444, "YUV 4:4:4"),
+};
+
+static void
+drm_hdmi_connector_get_output_format_name_valid_desc(const struct drm_hdmi_connector_get_output_format_name_test *t,
+ char *desc)
+{
+ sprintf(desc, "%s", t->expected_name);
+}
+
+KUNIT_ARRAY_PARAM(drm_hdmi_connector_get_output_format_name_valid,
+ drm_hdmi_connector_get_output_format_name_valid_tests,
+ drm_hdmi_connector_get_output_format_name_valid_desc);
+
+static void drm_test_drm_hdmi_connector_get_output_format_name_invalid(struct kunit *test)
+{
+ KUNIT_EXPECT_NULL(test, drm_hdmi_connector_get_output_format_name(4));
+};
+
+static struct kunit_case drm_hdmi_connector_get_output_format_name_tests[] = {
+ KUNIT_CASE_PARAM(drm_test_drm_hdmi_connector_get_output_format_name,
+ drm_hdmi_connector_get_output_format_name_valid_gen_params),
+ KUNIT_CASE(drm_test_drm_hdmi_connector_get_output_format_name_invalid),
+ { }
+};
+
+static struct kunit_suite drm_hdmi_connector_get_output_format_name_test_suite = {
+ .name = "drm_hdmi_connector_get_output_format_name",
+ .test_cases = drm_hdmi_connector_get_output_format_name_tests,
+};
+
static void drm_test_drm_connector_attach_broadcast_rgb_property(struct kunit *test)
{
struct drm_connector_init_priv *priv = test->priv;
@@ -691,6 +799,7 @@ static void drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector(
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
&priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
8);
KUNIT_EXPECT_EQ(test, ret, 0);

@@ -719,7 +828,8 @@ kunit_test_suites(
&drmm_connector_init_test_suite,
&drm_connector_attach_broadcast_rgb_property_test_suite,
&drm_get_tv_mode_from_name_test_suite,
- &drm_hdmi_connector_get_broadcast_rgb_name_test_suite
+ &drm_hdmi_connector_get_broadcast_rgb_name_test_suite,
+ &drm_hdmi_connector_get_output_format_name_test_suite
);

MODULE_AUTHOR("Maxime Ripard <[email protected]>");
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 1b1b6aed04ee..74db5ce47e01 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -391,6 +391,8 @@ enum drm_hdmi_broadcast_rgb {

const char *
drm_hdmi_connector_get_broadcast_rgb_name(enum drm_hdmi_broadcast_rgb broadcast_rgb);
+const char *
+drm_hdmi_connector_get_output_format_name(enum hdmi_colorspace fmt);

/**
* struct drm_monitor_range_info - Panel's Monitor range in EDID for
@@ -1077,6 +1079,11 @@ struct drm_connector_state {
* @output_bpc: Bits per color channel to output.
*/
unsigned int output_bpc;
+
+ /**
+ * @output_format: Pixel format to output in.
+ */
+ enum hdmi_colorspace output_format;
} hdmi;
};

@@ -1944,6 +1951,17 @@ struct drm_connector {

/** @hdr_sink_metadata: HDR Metadata Information read from sink */
struct hdr_sink_metadata hdr_sink_metadata;
+
+ /**
+ * @hdmi: HDMI-related variable and properties.
+ */
+ struct {
+ /**
+ * @supported_formats: Bitmask of @hdmi_colorspace
+ * supported by the controller.
+ */
+ unsigned long supported_formats;
+ } hdmi;
};

#define obj_to_connector(x) container_of(x, struct drm_connector, base)
@@ -1967,6 +1985,7 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
const struct drm_connector_funcs *funcs,
int connector_type,
struct i2c_adapter *ddc,
+ unsigned long supported_formats,
unsigned int max_bpc);
void drm_connector_attach_edid_property(struct drm_connector *connector);
int drm_connector_register(struct drm_connector *connector);

--
2.41.0

2023-11-28 10:26:48

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 09/45] drm/connector: hdmi: Add Broadcast RGB property

The i915 driver has a property to force the RGB range of an HDMI output.
The vc4 driver then implemented the same property with the same
semantics. KWin has support for it, and a PR for mutter is also there to
support it.

Both drivers implementing the same property with the same semantics,
plus the userspace having support for it, is proof enough that it's
pretty much a de-facto standard now and we can provide helpers for it.

Let's plumb it into the newly created HDMI connector.

Signed-off-by: Maxime Ripard <[email protected]>
---
Documentation/gpu/kms-properties.csv | 1 -
drivers/gpu/drm/drm_atomic.c | 5 +
drivers/gpu/drm/drm_atomic_state_helper.c | 17 +
drivers/gpu/drm/drm_atomic_uapi.c | 4 +
drivers/gpu/drm/drm_connector.c | 76 +++++
drivers/gpu/drm/tests/Makefile | 1 +
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 376 +++++++++++++++++++++
drivers/gpu/drm/tests/drm_connector_test.c | 117 ++++++-
drivers/gpu/drm/tests/drm_kunit_edid.h | 106 ++++++
include/drm/drm_connector.h | 36 ++
10 files changed, 737 insertions(+), 2 deletions(-)

diff --git a/Documentation/gpu/kms-properties.csv b/Documentation/gpu/kms-properties.csv
index 0f9590834829..caef14c532d4 100644
--- a/Documentation/gpu/kms-properties.csv
+++ b/Documentation/gpu/kms-properties.csv
@@ -17,7 +17,6 @@ Owner Module/Drivers,Group,Property Name,Type,Property Values,Object attached,De
,Virtual GPU,“suggested X”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an X offset for a connector
,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an Y offset for a connector
,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" }",Connector,TDB
-i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:235"" }",Connector,"When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normally in the range 0..1.0 are remapped to the range 16/255..235/255."
,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" }",Connector,TBD
,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD
,,"""left_margin""",RANGE,"Min=0, Max= SDVO dependent",Connector,TBD
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index f1a503aafe5a..de7cdc36a245 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1142,6 +1142,11 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
drm_printf(p, "\tmax_requested_bpc=%d\n", state->max_requested_bpc);
drm_printf(p, "\tcolorspace=%s\n", drm_get_colorspace_name(state->colorspace));

+ if (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+ connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)
+ drm_printf(p, "\tbroadcast_rgb=%s\n",
+ drm_hdmi_connector_get_broadcast_rgb_name(state->hdmi.broadcast_rgb));
+
if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
if (state->writeback_job && state->writeback_job->fb)
drm_printf(p, "\tfb=%d\n", state->writeback_job->fb->base.id);
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 29cb64e9cf28..37193c6f9fca 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -569,6 +569,7 @@ EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
void __drm_atomic_helper_connector_hdmi_reset(struct drm_connector *connector,
struct drm_connector_state *new_state)
{
+ new_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_AUTO;
}
EXPORT_SYMBOL(__drm_atomic_helper_connector_hdmi_reset);

@@ -636,6 +637,22 @@ EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
struct drm_atomic_state *state)
{
+ struct drm_connector_state *old_state =
+ drm_atomic_get_old_connector_state(state, connector);
+ struct drm_connector_state *new_state =
+ drm_atomic_get_new_connector_state(state, connector);
+
+ if (old_state->hdmi.broadcast_rgb != new_state->hdmi.broadcast_rgb) {
+ struct drm_crtc *crtc = new_state->crtc;
+ struct drm_crtc_state *crtc_state;
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ crtc_state->mode_changed = true;
+ }
+
return 0;
}
EXPORT_SYMBOL(drm_atomic_helper_connector_hdmi_check);
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 98d3b10c08ae..96798592bd64 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -798,6 +798,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
state->max_requested_bpc = val;
} else if (property == connector->privacy_screen_sw_state_property) {
state->privacy_screen_sw_state = val;
+ } else if (property == connector->broadcast_rgb_property) {
+ state->hdmi.broadcast_rgb = val;
} else if (connector->funcs->atomic_set_property) {
return connector->funcs->atomic_set_property(connector,
state, property, val);
@@ -881,6 +883,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
*val = state->max_requested_bpc;
} else if (property == connector->privacy_screen_sw_state_property) {
*val = state->privacy_screen_sw_state;
+ } else if (property == connector->broadcast_rgb_property) {
+ *val = state->hdmi.broadcast_rgb;
} else if (connector->funcs->atomic_get_property) {
return connector->funcs->atomic_get_property(connector,
state, property, val);
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index a87515897267..8f57e59dfe72 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1186,6 +1186,29 @@ static const u32 dp_colorspaces =
BIT(DRM_MODE_COLORIMETRY_BT2020_CYCC) |
BIT(DRM_MODE_COLORIMETRY_BT2020_YCC);

+static const struct drm_prop_enum_list broadcast_rgb_names[] = {
+ { DRM_HDMI_BROADCAST_RGB_AUTO, "Automatic" },
+ { DRM_HDMI_BROADCAST_RGB_FULL, "Full" },
+ { DRM_HDMI_BROADCAST_RGB_LIMITED, "Limited 16:235" },
+};
+
+/*
+ * drm_hdmi_connector_get_broadcast_rgb_name - Return a string for HDMI connector RGB broadcast selection
+ * @broadcast_rgb: Broadcast RGB selection to compute name of
+ *
+ * Returns: the name of the Broadcast RGB selection, or NULL if the type
+ * is not valid.
+ */
+const char *
+drm_hdmi_connector_get_broadcast_rgb_name(enum drm_hdmi_broadcast_rgb broadcast_rgb)
+{
+ if (broadcast_rgb > DRM_HDMI_BROADCAST_RGB_LIMITED)
+ return NULL;
+
+ return broadcast_rgb_names[broadcast_rgb].name;
+}
+EXPORT_SYMBOL(drm_hdmi_connector_get_broadcast_rgb_name);
+
/**
* DOC: standard connector properties
*
@@ -1658,6 +1681,26 @@ EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
/**
* DOC: HDMI connector properties
*
+ * Broadcast RGB
+ * Indicates the RGB Quantization Range (Full vs Limited) used.
+ * Infoframes will be generated according to that value.
+ *
+ * The value of this property can be one of the following:
+ *
+ * Automatic:
+ * RGB Range is selected automatically based on the mode
+ * according to the HDMI specifications.
+ *
+ * Full:
+ * Full RGB Range is forced.
+ *
+ * Limited 16:235:
+ * Limited RGB Range is forced. Unlike the name suggests,
+ * this works for any number of bits-per-component.
+ *
+ * Drivers can set up this property by calling
+ * drm_connector_attach_broadcast_rgb_property().
+ *
* content type (HDMI specific):
* Indicates content type setting to be used in HDMI infoframes to indicate
* content type for the external device, so that it adjusts its display
@@ -2520,6 +2563,39 @@ int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *conn
}
EXPORT_SYMBOL(drm_connector_attach_hdr_output_metadata_property);

+/**
+ * drm_connector_attach_broadcast_rgb_property - attach "Broadcast RGB" property
+ * @connector: connector to attach the property on.
+ *
+ * This is used to add support for forcing the RGB range on a connector
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_attach_broadcast_rgb_property(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_property *prop;
+
+ prop = connector->broadcast_rgb_property;
+ if (!prop) {
+ prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
+ "Broadcast RGB",
+ broadcast_rgb_names,
+ ARRAY_SIZE(broadcast_rgb_names));
+ if (!prop)
+ return -EINVAL;
+
+ connector->broadcast_rgb_property = prop;
+ }
+
+ drm_object_attach_property(&connector->base, prop,
+ DRM_HDMI_BROADCAST_RGB_AUTO);
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_connector_attach_broadcast_rgb_property);
+
/**
* drm_connector_attach_colorspace_property - attach "Colorspace" property
* @connector: connector to attach the property on.
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index 2645af241ff0..80bf62938e5e 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_KUNIT_TEST_HELPERS) += \
drm_kunit_helpers.o

obj-$(CONFIG_DRM_KUNIT_TEST) += \
+ drm_atomic_state_helper_test.o \
drm_buddy_test.o \
drm_cmdline_parser_test.o \
drm_connector_test.o \
diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
new file mode 100644
index 000000000000..21e6f796ee13
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Kunit test for drm_atomic_state_helper functions
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_atomic_uapi.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_kunit_helpers.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include <drm/drm_print.h>
+#include "../drm_crtc_internal.h"
+
+#include <kunit/test.h>
+
+#include "drm_kunit_edid.h"
+
+struct drm_atomic_helper_connector_hdmi_priv {
+ struct drm_device drm;
+ struct drm_plane *plane;
+ struct drm_crtc *crtc;
+ struct drm_encoder encoder;
+ struct drm_connector connector;
+
+ const char *current_edid;
+ size_t current_edid_len;
+};
+
+#define connector_to_priv(c) \
+ container_of_const(c, struct drm_atomic_helper_connector_hdmi_priv, connector)
+
+static struct drm_display_mode *find_preferred_mode(struct drm_connector *connector)
+{
+ struct drm_device *drm = connector->dev;
+ struct drm_display_mode *mode, *preferred;
+
+ mutex_lock(&drm->mode_config.mutex);
+ preferred = list_first_entry(&connector->modes, struct drm_display_mode, head);
+ list_for_each_entry(mode, &connector->modes, head)
+ if (mode->type & DRM_MODE_TYPE_PREFERRED)
+ preferred = mode;
+ mutex_unlock(&drm->mode_config.mutex);
+
+ return preferred;
+}
+
+static int light_up_connector(struct kunit *test,
+ struct drm_device *drm,
+ struct drm_crtc *crtc,
+ struct drm_connector *connector,
+ struct drm_display_mode *mode,
+ struct drm_modeset_acquire_ctx *ctx)
+{
+ struct drm_atomic_state *state;
+ struct drm_connector_state *conn_state;
+ struct drm_crtc_state *crtc_state;
+ int ret;
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ conn_state = drm_atomic_get_connector_state(state, connector);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ ret = drm_atomic_set_crtc_for_connector(conn_state, crtc);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
+
+ ret = drm_atomic_set_mode_for_crtc(crtc_state, mode);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ crtc_state->enable = true;
+ crtc_state->active = true;
+
+ ret = drm_atomic_commit(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ return 0;
+}
+
+static int set_connector_edid(struct kunit *test, struct drm_connector *connector,
+ const char *edid, size_t edid_len)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv =
+ connector_to_priv(connector);
+ struct drm_device *drm = connector->dev;
+ int ret;
+
+ priv->current_edid = edid;
+ priv->current_edid_len = edid_len;
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = connector->funcs->fill_modes(connector, 4096, 4096);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ return 0;
+}
+
+static int dummy_connector_get_modes(struct drm_connector *connector)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv =
+ connector_to_priv(connector);
+ const struct drm_edid *edid;
+ unsigned int num_modes;
+
+ edid = drm_edid_alloc(priv->current_edid, priv->current_edid_len);
+ if (!edid)
+ return -EINVAL;
+
+ drm_edid_connector_update(connector, edid);
+ num_modes = drm_edid_connector_add_modes(connector);
+
+ drm_edid_free(edid);
+
+ return num_modes;
+}
+
+static const struct drm_connector_helper_funcs dummy_connector_helper_funcs = {
+ .atomic_check = drm_atomic_helper_connector_hdmi_check,
+ .get_modes = dummy_connector_get_modes,
+};
+
+static void dummy_hdmi_connector_reset(struct drm_connector *connector)
+{
+ drm_atomic_helper_connector_reset(connector);
+ __drm_atomic_helper_connector_hdmi_reset(connector, connector->state);
+}
+
+static const struct drm_connector_funcs dummy_connector_funcs = {
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .reset = dummy_hdmi_connector_reset,
+};
+
+static
+struct drm_atomic_helper_connector_hdmi_priv *
+drm_atomic_helper_connector_hdmi_init(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_connector *conn;
+ struct drm_encoder *enc;
+ struct drm_device *drm;
+ struct device *dev;
+ int ret;
+
+ dev = drm_kunit_helper_alloc_device(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dev);
+
+ priv = drm_kunit_helper_alloc_drm_device(test, dev,
+ struct drm_atomic_helper_connector_hdmi_priv, drm,
+ DRIVER_MODESET | DRIVER_ATOMIC);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv);
+ test->priv = priv;
+
+ drm = &priv->drm;
+ priv->plane = drm_kunit_helper_create_primary_plane(test, drm,
+ NULL,
+ NULL,
+ NULL, 0,
+ NULL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->plane);
+
+ priv->crtc = drm_kunit_helper_create_crtc(test, drm,
+ priv->plane, NULL,
+ NULL,
+ NULL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->crtc);
+
+ enc = &priv->encoder;
+ ret = drmm_encoder_init(drm, enc, NULL, DRM_MODE_ENCODER_TMDS, NULL);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ enc->possible_crtcs = drm_crtc_mask(priv->crtc);
+
+ conn = &priv->connector;
+ ret = drmm_connector_hdmi_init(drm, conn,
+ &dummy_connector_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ NULL);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ drm_connector_helper_add(conn, &dummy_connector_helper_funcs);
+ drm_connector_attach_encoder(conn, enc);
+
+ drm_mode_config_reset(drm);
+
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ return priv;
+}
+
+/*
+ * Test that if we change the RGB quantization property to a different
+ * value, we trigger a mode change on the connector's CRTC, which will
+ * in turn disable/enable the connector.
+ */
+static void drm_test_check_broadcast_rgb_crtc_mode_changed(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *old_conn_state;
+ struct drm_connector_state *new_conn_state;
+ struct drm_crtc_state *crtc_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ conn = &priv->connector;
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ new_conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+ old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+ new_conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_FULL;
+
+ KUNIT_ASSERT_NE(test,
+ old_conn_state->hdmi.broadcast_rgb,
+ new_conn_state->hdmi.broadcast_rgb);
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ new_conn_state = drm_atomic_get_new_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+ KUNIT_EXPECT_EQ(test, new_conn_state->hdmi.broadcast_rgb, DRM_HDMI_BROADCAST_RGB_FULL);
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
+ KUNIT_EXPECT_TRUE(test, crtc_state->mode_changed);
+}
+
+/*
+ * Test that if we set the RGB quantization property to the same value,
+ * we don't trigger a mode change on the connector's CRTC and leave the
+ * connector unaffected.
+ */
+static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *old_conn_state;
+ struct drm_connector_state *new_conn_state;
+ struct drm_crtc_state *crtc_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ conn = &priv->connector;
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ new_conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+ old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+ new_conn_state->hdmi.broadcast_rgb = old_conn_state->hdmi.broadcast_rgb;
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+ new_conn_state = drm_atomic_get_new_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+ KUNIT_EXPECT_EQ(test,
+ old_conn_state->hdmi.broadcast_rgb,
+ new_conn_state->hdmi.broadcast_rgb);
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
+ KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
+}
+
+static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
+ KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
+ KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
+ { }
+};
+
+static struct kunit_suite drm_atomic_helper_connector_hdmi_check_test_suite = {
+ .name = "drm_atomic_helper_connector_hdmi_check",
+ .test_cases = drm_atomic_helper_connector_hdmi_check_tests,
+};
+
+/*
+ * Test that the value of the Broadcast RGB property out of reset is set
+ * to auto.
+ */
+static void drm_test_check_broadcast_rgb_value(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_connector_state *conn_state;
+ struct drm_connector *conn;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ conn_state = conn->state;
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.broadcast_rgb, DRM_HDMI_BROADCAST_RGB_AUTO);
+}
+
+static struct kunit_case drm_atomic_helper_connector_hdmi_reset_tests[] = {
+ KUNIT_CASE(drm_test_check_broadcast_rgb_value),
+ { }
+};
+
+static struct kunit_suite drm_atomic_helper_connector_hdmi_reset_test_suite = {
+ .name = "drm_atomic_helper_connector_hdmi_reset",
+ .test_cases = drm_atomic_helper_connector_hdmi_reset_tests,
+};
+
+kunit_test_suites(
+ &drm_atomic_helper_connector_hdmi_check_test_suite,
+ &drm_atomic_helper_connector_hdmi_reset_test_suite,
+);
+
+MODULE_AUTHOR("Maxime Ripard <[email protected]>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
index 780953d89d7c..f3e6cc2b3b2d 100644
--- a/drivers/gpu/drm/tests/drm_connector_test.c
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -12,6 +12,8 @@

#include <kunit/test.h>

+#include "../drm_crtc_internal.h"
+
struct drm_connector_init_priv {
struct drm_device drm;
struct drm_connector connector;
@@ -455,10 +457,123 @@ static struct kunit_suite drm_get_tv_mode_from_name_test_suite = {
.test_cases = drm_get_tv_mode_from_name_tests,
};

+struct drm_hdmi_connector_get_broadcast_rgb_name_test {
+ unsigned int kind;
+ const char *expected_name;
+};
+
+#define BROADCAST_RGB_TEST(_kind, _name) \
+ { \
+ .kind = _kind, \
+ .expected_name = _name, \
+ }
+
+static void drm_test_drm_hdmi_connector_get_broadcast_rgb_name(struct kunit *test)
+{
+ const struct drm_hdmi_connector_get_broadcast_rgb_name_test *params =
+ test->param_value;
+
+ KUNIT_EXPECT_STREQ(test,
+ drm_hdmi_connector_get_broadcast_rgb_name(params->kind),
+ params->expected_name);
+}
+
+static const
+struct drm_hdmi_connector_get_broadcast_rgb_name_test
+drm_hdmi_connector_get_broadcast_rgb_name_valid_tests[] = {
+ BROADCAST_RGB_TEST(DRM_HDMI_BROADCAST_RGB_AUTO, "Automatic"),
+ BROADCAST_RGB_TEST(DRM_HDMI_BROADCAST_RGB_FULL, "Full"),
+ BROADCAST_RGB_TEST(DRM_HDMI_BROADCAST_RGB_LIMITED, "Limited 16:235"),
+};
+
+static void
+drm_hdmi_connector_get_broadcast_rgb_name_valid_desc(const struct drm_hdmi_connector_get_broadcast_rgb_name_test *t,
+ char *desc)
+{
+ sprintf(desc, "%s", t->expected_name);
+}
+
+KUNIT_ARRAY_PARAM(drm_hdmi_connector_get_broadcast_rgb_name_valid,
+ drm_hdmi_connector_get_broadcast_rgb_name_valid_tests,
+ drm_hdmi_connector_get_broadcast_rgb_name_valid_desc);
+
+static void drm_test_drm_hdmi_connector_get_broadcast_rgb_name_invalid(struct kunit *test)
+{
+ KUNIT_EXPECT_NULL(test, drm_hdmi_connector_get_broadcast_rgb_name(3));
+};
+
+static struct kunit_case drm_hdmi_connector_get_broadcast_rgb_name_tests[] = {
+ KUNIT_CASE_PARAM(drm_test_drm_hdmi_connector_get_broadcast_rgb_name,
+ drm_hdmi_connector_get_broadcast_rgb_name_valid_gen_params),
+ KUNIT_CASE(drm_test_drm_hdmi_connector_get_broadcast_rgb_name_invalid),
+ { }
+};
+
+static struct kunit_suite drm_hdmi_connector_get_broadcast_rgb_name_test_suite = {
+ .name = "drm_hdmi_connector_get_broadcast_rgb_name",
+ .test_cases = drm_hdmi_connector_get_broadcast_rgb_name_tests,
+};
+
+static void drm_test_drm_connector_attach_broadcast_rgb_property(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_property *prop;
+ int ret;
+
+ ret = drmm_connector_init(&priv->drm, connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ ret = drm_connector_attach_broadcast_rgb_property(connector);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ prop = connector->broadcast_rgb_property;
+ KUNIT_ASSERT_NOT_NULL(test, prop);
+ KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+}
+
+static void drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_property *prop;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ ret = drm_connector_attach_broadcast_rgb_property(connector);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ prop = connector->broadcast_rgb_property;
+ KUNIT_ASSERT_NOT_NULL(test, prop);
+ KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+}
+
+static struct kunit_case drm_connector_attach_broadcast_rgb_property_tests[] = {
+ KUNIT_CASE(drm_test_drm_connector_attach_broadcast_rgb_property),
+ KUNIT_CASE(drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector),
+ { }
+};
+
+static struct kunit_suite drm_connector_attach_broadcast_rgb_property_test_suite = {
+ .name = "drm_connector_attach_broadcast_rgb_property",
+ .init = drm_test_connector_init,
+ .test_cases = drm_connector_attach_broadcast_rgb_property_tests,
+};
+
kunit_test_suites(
&drmm_connector_hdmi_init_test_suite,
&drmm_connector_init_test_suite,
- &drm_get_tv_mode_from_name_test_suite
+ &drm_connector_attach_broadcast_rgb_property_test_suite,
+ &drm_get_tv_mode_from_name_test_suite,
+ &drm_hdmi_connector_get_broadcast_rgb_name_test_suite
);

MODULE_AUTHOR("Maxime Ripard <[email protected]>");
diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.h b/drivers/gpu/drm/tests/drm_kunit_edid.h
new file mode 100644
index 000000000000..2bba316de064
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_edid.h
@@ -0,0 +1,106 @@
+#ifndef DRM_KUNIT_EDID_H_
+#define DRM_KUNIT_EDID_H_
+
+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 02 00 00 00 00 00 00 00
+ * 00 00 00 20 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 92
+ *
+ * 02 03 1b 81 e3 05 00 20 41 10 e2 00 4a 6d 03 0c
+ * 00 12 34 00 28 20 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ * EDID Structure Version & Revision: 1.3
+ * Vendor & Product Identification:
+ * Manufacturer: LNX
+ * Model: 42
+ * Made in: 2023
+ * Basic Display Parameters & Features:
+ * Digital display
+ * DFP 1.x compatible TMDS
+ * Maximum image size: 160 cm x 90 cm
+ * Gamma: 2.20
+ * Monochrome or grayscale display
+ * First detailed timing is the preferred timing
+ * Color Characteristics:
+ * Red : 0.0000, 0.0000
+ * Green: 0.0000, 0.0000
+ * Blue : 0.0000, 0.0000
+ * White: 0.0000, 0.0000
+ * Established Timings I & II:
+ * DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
+ * Standard Timings: none
+ * Detailed Timing Descriptors:
+ * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm)
+ * Hfront 88 Hsync 44 Hback 148 Hpol P
+ * Vfront 4 Vsync 5 Vback 36 Vpol P
+ * Display Product Name: 'Test EDID'
+ * Display Range Limits:
+ * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ * Dummy Descriptor:
+ * Extension blocks: 1
+ * Checksum: 0x92
+ *
+ * ----------------
+ *
+ * Block 1, CTA-861 Extension Block:
+ * Revision: 3
+ * Underscans IT Video Formats by default
+ * Native detailed modes: 1
+ * Colorimetry Data Block:
+ * sRGB
+ * Video Data Block:
+ * VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz
+ * Video Capability Data Block:
+ * YCbCr quantization: No Data
+ * RGB quantization: Selectable (via AVI Q)
+ * PT scan behavior: No Data
+ * IT scan behavior: Always Underscanned
+ * CE scan behavior: Always Underscanned
+ * Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
+ * Source physical address: 1.2.3.4
+ * Maximum TMDS clock: 200 MHz
+ * Extended HDMI video details:
+ * Checksum: 0xd0 Unused space in Extension Block: 100 bytes
+ */
+const unsigned char test_edid_hdmi_1080p_rgb_max_200mhz[] = {
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+ 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
+ 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+ 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+ 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+ 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+ 0x46, 0x00, 0x00, 0xc4, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x41, 0x02, 0x03, 0x1b, 0x81,
+ 0xe3, 0x05, 0x00, 0x20, 0x41, 0x10, 0xe2, 0x00, 0x4a, 0x6d, 0x03, 0x0c,
+ 0x00, 0x12, 0x34, 0x00, 0x28, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0xd0
+};
+
+#endif // DRM_KUNIT_EDID_H_
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 000a2a156619..3867a4c01b78 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -368,6 +368,30 @@ enum drm_panel_orientation {
DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
};

+/**
+ * enum drm_hdmi_broadcast_rgb - Broadcast RGB Selection for an HDMI @drm_connector
+ */
+enum drm_hdmi_broadcast_rgb {
+ /**
+ * @DRM_HDMI_BROADCAST_RGB_AUTO: The RGB range is selected
+ * automatically based on the mode.
+ */
+ DRM_HDMI_BROADCAST_RGB_AUTO,
+
+ /**
+ * @DRM_HDMI_BROADCAST_RGB_FULL: Full range RGB is forced.
+ */
+ DRM_HDMI_BROADCAST_RGB_FULL,
+
+ /**
+ * @DRM_HDMI_BROADCAST_RGB_LIMITED: Limited range RGB is forced.
+ */
+ DRM_HDMI_BROADCAST_RGB_LIMITED,
+};
+
+const char *
+drm_hdmi_connector_get_broadcast_rgb_name(enum drm_hdmi_broadcast_rgb broadcast_rgb);
+
/**
* struct drm_monitor_range_info - Panel's Monitor range in EDID for
* &drm_display_info
@@ -1037,6 +1061,11 @@ struct drm_connector_state {
* @drm_atomic_helper_connector_hdmi_check().
*/
struct {
+ /**
+ * @broadcast_rgb: Connector property to pass the
+ * Broadcast RGB selection value.
+ */
+ enum drm_hdmi_broadcast_rgb broadcast_rgb;
} hdmi;
};

@@ -1706,6 +1735,12 @@ struct drm_connector {
*/
struct drm_property *privacy_screen_hw_state_property;

+ /**
+ * @broadcast_rgb_property: Connector property to set the
+ * Broadcast RGB selection to output with.
+ */
+ struct drm_property *broadcast_rgb_property;
+
#define DRM_CONNECTOR_POLL_HPD (1 << 0)
#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
@@ -2026,6 +2061,7 @@ int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
u32 scaling_mode_mask);
int drm_connector_attach_vrr_capable_property(
struct drm_connector *connector);
+int drm_connector_attach_broadcast_rgb_property(struct drm_connector *connector);
int drm_connector_attach_colorspace_property(struct drm_connector *connector);
int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector);
bool drm_connector_atomic_hdr_metadata_equal(struct drm_connector_state *old_state,

--
2.41.0

2023-11-28 10:27:25

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 17/45] drm/connector: hdmi: Add Infoframes generation

Infoframes in KMS is usually handled by a bunch of low-level helpers
that require quite some boilerplate for drivers. This leads to
discrepancies with how drivers generate them, and which are actually
sent.

Now that we have everything needed to generate them in the HDMI
connector state, we can generate them in our common logic so that
drivers can simply reuse what we precomputed.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/Kconfig | 1 +
drivers/gpu/drm/drm_atomic_state_helper.c | 327 +++++++++++++++++++++
drivers/gpu/drm/drm_connector.c | 16 +
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 1 +
drivers/gpu/drm/tests/drm_connector_test.c | 222 ++++++++++++++
include/drm/drm_atomic_state_helper.h | 7 +
include/drm/drm_connector.h | 133 +++++++++
7 files changed, 707 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 740c1c0bd068..b7dc4c14329f 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -99,6 +99,7 @@ config DRM_KUNIT_TEST
config DRM_KMS_HELPER
tristate
depends on DRM
+ select DRM_DISPLAY_HDMI_HELPER
help
CRTC helpers for KMS drivers.

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 4b21422b0e3f..dd83b1c24f90 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -38,6 +38,8 @@
#include <drm/drm_vblank.h>
#include <drm/drm_writeback.h>

+#include <drm/display/drm_hdmi_helper.h>
+
#include <linux/slab.h>
#include <linux/dma-fence.h>

@@ -891,6 +893,142 @@ hdmi_compute_config(const struct drm_connector *connector,
return -EINVAL;
}

+static int hdmi_generate_avi_infoframe(const struct drm_connector *connector,
+ struct drm_connector_state *state)
+{
+ const struct drm_display_mode *mode =
+ connector_state_get_mode(state);
+ struct drm_connector_hdmi_infoframe *infoframe =
+ &state->hdmi.infoframes.avi;
+ struct hdmi_avi_infoframe *frame =
+ &infoframe->data.avi;
+ bool is_full_range = state->hdmi.is_full_range;
+ enum hdmi_quantization_range rgb_quant_range =
+ is_full_range ? HDMI_QUANTIZATION_RANGE_FULL : HDMI_QUANTIZATION_RANGE_LIMITED;
+ int ret;
+
+ ret = drm_hdmi_avi_infoframe_from_display_mode(frame, connector, mode);
+ if (ret)
+ return ret;
+
+ frame->colorspace = state->hdmi.output_format;
+
+ drm_hdmi_avi_infoframe_quant_range(frame, connector, mode, rgb_quant_range);
+ drm_hdmi_avi_infoframe_colorimetry(frame, state);
+ drm_hdmi_avi_infoframe_bars(frame, state);
+
+ infoframe->set = true;
+
+ return 0;
+}
+
+static int hdmi_generate_spd_infoframe(const struct drm_connector *connector,
+ struct drm_connector_state *state)
+{
+ struct drm_connector_hdmi_infoframe *infoframe =
+ &state->hdmi.infoframes.spd;
+ struct hdmi_spd_infoframe *frame =
+ &infoframe->data.spd;
+ int ret;
+
+ ret = hdmi_spd_infoframe_init(frame,
+ connector->hdmi.vendor,
+ connector->hdmi.product);
+ if (ret)
+ return ret;
+
+ frame->sdi = HDMI_SPD_SDI_PC;
+
+ infoframe->set = true;
+
+ return 0;
+}
+
+static int hdmi_generate_hdr_infoframe(const struct drm_connector *connector,
+ struct drm_connector_state *state)
+{
+ struct drm_connector_hdmi_infoframe *infoframe =
+ &state->hdmi.infoframes.hdr_drm;
+ struct hdmi_drm_infoframe *frame =
+ &infoframe->data.drm;
+ int ret;
+
+ if (connector->max_bpc < 10)
+ return 0;
+
+ if (!state->hdr_output_metadata)
+ return 0;
+
+ ret = drm_hdmi_infoframe_set_hdr_metadata(frame, state);
+ if (ret)
+ return ret;
+
+ infoframe->set = true;
+
+ return 0;
+}
+
+static int hdmi_generate_hdmi_vendor_infoframe(const struct drm_connector *connector,
+ struct drm_connector_state *state)
+{
+ const struct drm_display_mode *mode =
+ connector_state_get_mode(state);
+ struct drm_connector_hdmi_infoframe *infoframe =
+ &state->hdmi.infoframes.hdmi;
+ struct hdmi_vendor_infoframe *frame =
+ &infoframe->data.vendor.hdmi;
+ int ret;
+
+ ret = drm_hdmi_vendor_infoframe_from_display_mode(frame, connector, mode);
+ if (ret) {
+ if (ret == -EINVAL)
+ return 0;
+
+ return ret;
+ }
+
+ infoframe->set = true;
+
+ return 0;
+}
+
+static int
+hdmi_generate_infoframes(const struct drm_connector *connector,
+ struct drm_connector_state *state)
+{
+ const struct drm_display_info *info = &connector->display_info;
+ int ret;
+
+ if (!info->is_hdmi)
+ return 0;
+
+ if (!info->has_hdmi_infoframe)
+ return 0;
+
+ ret = hdmi_generate_avi_infoframe(connector, state);
+ if (ret)
+ return ret;
+
+ ret = hdmi_generate_spd_infoframe(connector, state);
+ if (ret)
+ return ret;
+
+ /*
+ * Audio Infoframes will be generated by ALSA, and updated by
+ * drm_atomic_helper_connector_hdmi_update_audio_infoframe().
+ */
+
+ ret = hdmi_generate_hdr_infoframe(connector, state);
+ if (ret)
+ return ret;
+
+ ret = hdmi_generate_hdmi_vendor_infoframe(connector, state);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
/**
* drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
* @connector: DRM Connector
@@ -920,6 +1058,10 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
if (ret)
return ret;

+ ret = hdmi_generate_infoframes(connector, new_state);
+ if (ret)
+ return ret;
+
if (old_state->hdmi.broadcast_rgb != new_state->hdmi.broadcast_rgb ||
old_state->hdmi.output_bpc != new_state->hdmi.output_bpc ||
old_state->hdmi.output_format != new_state->hdmi.output_format) {
@@ -937,6 +1079,191 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
}
EXPORT_SYMBOL(drm_atomic_helper_connector_hdmi_check);

+#define HDMI_MAX_INFOFRAME_SIZE 29
+
+static int clear_device_infoframe(struct drm_connector *connector,
+ enum hdmi_infoframe_type type)
+{
+ const struct drm_connector_hdmi_funcs *funcs = connector->hdmi.funcs;
+
+ if (!funcs || !funcs->clear_infoframe)
+ return 0;
+
+ return funcs->clear_infoframe(connector, type);
+}
+
+static int clear_infoframe(struct drm_connector *connector,
+ struct drm_connector_hdmi_infoframe *conn_frame,
+ struct drm_connector_hdmi_infoframe *old_frame)
+{
+ int ret;
+
+ ret = clear_device_infoframe(connector, old_frame->data.any.type);
+ if (ret)
+ return ret;
+
+ memset(old_frame, 0, sizeof(*old_frame));
+
+ return 0;
+}
+
+static int write_device_infoframe(struct drm_connector *connector,
+ union hdmi_infoframe *frame)
+{
+ const struct drm_connector_hdmi_funcs *funcs = connector->hdmi.funcs;
+ u8 buffer[HDMI_MAX_INFOFRAME_SIZE];
+ int len;
+
+ if (!funcs || !funcs->write_infoframe)
+ return -ENOSYS;
+
+ len = hdmi_infoframe_pack(frame, buffer, sizeof(buffer));
+ if (len < 0)
+ return len;
+
+ return funcs->write_infoframe(connector, frame->any.type, buffer, len);
+}
+
+static int write_infoframe(struct drm_connector *connector,
+ struct drm_connector_hdmi_infoframe *conn_frame,
+ struct drm_connector_hdmi_infoframe *new_frame)
+{
+ int ret;
+
+ ret = write_device_infoframe(connector, &new_frame->data);
+ if (ret)
+ return ret;
+
+ if (conn_frame)
+ memcpy(conn_frame, new_frame, sizeof(*conn_frame));
+
+ return 0;
+}
+
+static int write_or_clear_infoframe(struct drm_connector *connector,
+ struct drm_connector_hdmi_infoframe *conn_frame,
+ struct drm_connector_hdmi_infoframe *old_frame,
+ struct drm_connector_hdmi_infoframe *new_frame)
+{
+ if (new_frame->set)
+ return write_infoframe(connector, conn_frame, new_frame);
+
+ if (old_frame->set && !new_frame->set)
+ return clear_infoframe(connector, conn_frame, old_frame);
+
+ return 0;
+}
+
+#define UPDATE_INFOFRAME(c, os, ns, i) \
+ write_or_clear_infoframe(c, \
+ &(c)->hdmi.infoframes.i, \
+ &(os)->hdmi.infoframes.i, \
+ &(ns)->hdmi.infoframes.i)
+
+/**
+ * drm_atomic_helper_connector_hdmi_update_infoframes - Update the Infoframes
+ * @connector: A pointer to the HDMI connector
+ * @state: The HDMI connector state to generate the infoframe from
+ *
+ * This function is meant for HDMI connector drivers to write their
+ * infoframes. It will typically be used in a
+ * @drm_connector_helper_funcs.atomic_enable implementation.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_atomic_helper_connector_hdmi_update_infoframes(struct drm_connector *connector,
+ struct drm_atomic_state *state)
+{
+ struct drm_connector_state *old_state =
+ drm_atomic_get_old_connector_state(state, connector);
+ struct drm_connector_state *new_state =
+ drm_atomic_get_new_connector_state(state, connector);
+ struct drm_display_info *info = &connector->display_info;
+ int ret;
+
+ if (!info->is_hdmi)
+ return 0;
+
+ if (!info->has_hdmi_infoframe)
+ return 0;
+
+ mutex_lock(&connector->hdmi.infoframes.lock);
+
+ ret = UPDATE_INFOFRAME(connector, old_state, new_state, avi);
+ if (ret)
+ goto out;
+
+ if (connector->hdmi.infoframes.audio.set) {
+ ret = write_infoframe(connector,
+ NULL,
+ &connector->hdmi.infoframes.audio);
+ if (ret)
+ goto out;
+ }
+
+ ret = UPDATE_INFOFRAME(connector, old_state, new_state, hdr_drm);
+ if (ret)
+ goto out;
+
+ ret = UPDATE_INFOFRAME(connector, old_state, new_state, spd);
+ if (ret)
+ goto out;
+
+ ret = UPDATE_INFOFRAME(connector, old_state, new_state, hdmi);
+ if (ret)
+ goto out;
+
+out:
+ mutex_unlock(&connector->hdmi.infoframes.lock);
+ return ret;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_hdmi_update_infoframes);
+
+#undef UPDATE_INFOFRAME
+#undef UPDATE_INFOFRAME_TOGGLE
+
+/**
+ * drm_atomic_helper_connector_hdmi_update_audio_infoframe - Update the Audio Infoframe
+ * @connector: A pointer to the HDMI connector
+ * @frame: A pointer to the audio infoframe to write
+ *
+ * This function is meant for HDMI connector drivers to update their
+ * audio infoframe. It will typically be used in one of the ALSA hooks
+ * (most likely prepare).
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int
+drm_atomic_helper_connector_hdmi_update_audio_infoframe(struct drm_connector *connector,
+ struct hdmi_audio_infoframe *frame)
+{
+ struct drm_connector_hdmi_infoframe infoframe = {};
+ struct drm_display_info *info = &connector->display_info;
+ int ret;
+
+ if (!info->is_hdmi)
+ return 0;
+
+ if (!info->has_hdmi_infoframe)
+ return 0;
+
+ memcpy(&infoframe.data, frame, sizeof(infoframe.data));
+ infoframe.set = true;
+
+ mutex_lock(&connector->hdmi.infoframes.lock);
+
+ ret = write_infoframe(connector,
+ &connector->hdmi.infoframes.audio,
+ &infoframe);
+
+ mutex_unlock(&connector->hdmi.infoframes.lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_hdmi_update_audio_infoframe);
+
/**
* __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
* @connector: connector object
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 1073ab2f78bc..8c9a672b321a 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -459,6 +459,8 @@ EXPORT_SYMBOL(drmm_connector_init);
* drmm_connector_hdmi_init - Init a preallocated HDMI connector
* @dev: DRM device
* @connector: A pointer to the HDMI connector to init
+ * @vendor: HDMI Controller Vendor name
+ * @product: HDMI Controller Product name
* @funcs: callbacks for this connector
* @hdmi_funcs: HDMI-related callbacks for this connector
* @connector_type: user visible type of the connector
@@ -479,6 +481,7 @@ EXPORT_SYMBOL(drmm_connector_init);
*/
int drmm_connector_hdmi_init(struct drm_device *dev,
struct drm_connector *connector,
+ const char *vendor, const char *product,
const struct drm_connector_funcs *funcs,
const struct drm_connector_hdmi_funcs *hdmi_funcs,
int connector_type,
@@ -488,6 +491,13 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
{
int ret;

+ if (!vendor || !product)
+ return -EINVAL;
+
+ if ((strlen(vendor) > DRM_CONNECTOR_HDMI_VENDOR_LEN) ||
+ (strlen(product) > DRM_CONNECTOR_HDMI_PRODUCT_LEN))
+ return -EINVAL;
+
if (!(connector_type == DRM_MODE_CONNECTOR_HDMIA ||
connector_type == DRM_MODE_CONNECTOR_HDMIB))
return -EINVAL;
@@ -506,6 +516,12 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
return ret;

connector->hdmi.supported_formats = supported_formats;
+ strncpy(connector->hdmi.vendor, vendor, sizeof(connector->hdmi.vendor));
+ strncpy(connector->hdmi.product, product, sizeof(connector->hdmi.product));
+
+ ret = drmm_mutex_init(dev, &connector->hdmi.infoframes.lock);
+ if (ret)
+ return ret;

/*
* drm_connector_attach_max_bpc_property() requires the
diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
index 860e34b00fee..1eaa83af9dd0 100644
--- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
@@ -203,6 +203,7 @@ drm_atomic_helper_connector_hdmi_init(struct kunit *test,

conn = &priv->connector;
ret = drmm_connector_hdmi_init(drm, conn,
+ "Vendor", "Product",
&dummy_connector_funcs,
&dummy_connector_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
index 493cbda9d5db..329233de7d50 100644
--- a/drivers/gpu/drm/tests/drm_connector_test.c
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -238,6 +238,7 @@ static void drm_test_connector_hdmi_init_valid(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -257,6 +258,7 @@ static void drm_test_connector_hdmi_init_null_ddc(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -275,6 +277,7 @@ static void drm_test_connector_hdmi_init_null_device(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(NULL, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -293,6 +296,47 @@ static void drm_test_connector_hdmi_init_null_connector(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, NULL,
+ "Vendor", "Product",
+ &dummy_funcs,
+ &dummy_hdmi_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of an HDMI connector with a NULL vendor
+ * fails.
+ */
+static void drm_test_connector_hdmi_init_null_vendor(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ NULL, "Product",
+ &dummy_funcs,
+ &dummy_hdmi_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of an HDMI connector with a NULL product
+ * fails.
+ */
+static void drm_test_connector_hdmi_init_null_product(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", NULL,
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -312,6 +356,7 @@ static void drm_test_connector_hdmi_init_null_funcs(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
NULL,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -331,6 +376,7 @@ static void drm_test_connector_hdmi_init_null_hdmi_funcs(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
NULL,
DRM_MODE_CONNECTOR_HDMIA,
@@ -340,6 +386,164 @@ static void drm_test_connector_hdmi_init_null_hdmi_funcs(struct kunit *test)
KUNIT_EXPECT_LT(test, ret, 0);
}

+/*
+ * Test that the registration of a connector with a valid, shorter than
+ * the max length, product name succeeds, and is stored padded with 0.
+ */
+static void drm_test_connector_hdmi_init_product_valid(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const char *product_name = "Prod";
+ int ret;
+
+ KUNIT_ASSERT_LT(test, strlen(product_name), DRM_CONNECTOR_HDMI_PRODUCT_LEN);
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", product_name,
+ &dummy_funcs,
+ &dummy_hdmi_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+ KUNIT_EXPECT_MEMEQ(test,
+ priv->connector.hdmi.product,
+ "Prod\0\0\0\0\0\0\0\0\0\0\0\0",
+ DRM_CONNECTOR_HDMI_PRODUCT_LEN);
+}
+
+/*
+ * Test that the registration of a connector with a valid, at max
+ * length, product name succeeds, and is stored padded without any
+ * trailing \0.
+ */
+static void drm_test_connector_hdmi_init_product_length_exact(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const char *product_name = "ProductProductPr";
+ int ret;
+
+ KUNIT_ASSERT_EQ(test, strlen(product_name), DRM_CONNECTOR_HDMI_PRODUCT_LEN);
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", product_name,
+ &dummy_funcs,
+ &dummy_hdmi_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+ KUNIT_EXPECT_EQ(test,
+ strncmp(priv->connector.hdmi.product,
+ product_name,
+ DRM_CONNECTOR_HDMI_PRODUCT_LEN),
+ 0);
+}
+
+/*
+ * Test that the registration of a connector with a product name larger
+ * than the maximum length fails.
+ */
+static void drm_test_connector_hdmi_init_product_length_too_long(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const char *product_name = "ProductProductProduct";
+ int ret;
+
+ KUNIT_ASSERT_GT(test, strlen(product_name), DRM_CONNECTOR_HDMI_PRODUCT_LEN);
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", product_name,
+ &dummy_funcs,
+ &dummy_hdmi_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector with a vendor name smaller
+ * than the maximum length succeeds, and is stored padded with zeros.
+ */
+static void drm_test_connector_hdmi_init_vendor_valid(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const char *vendor_name = "Vend";
+ int ret;
+
+ KUNIT_ASSERT_LT(test, strlen(vendor_name), DRM_CONNECTOR_HDMI_VENDOR_LEN);
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ vendor_name, "Product",
+ &dummy_funcs,
+ &dummy_hdmi_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+ KUNIT_EXPECT_MEMEQ(test,
+ priv->connector.hdmi.vendor,
+ "Vend\0\0\0\0",
+ DRM_CONNECTOR_HDMI_VENDOR_LEN);
+}
+
+/*
+ * Test that the registration of a connector with a vendor name at the
+ * maximum length succeeds, and is stored padded without the trailing
+ * zero.
+ */
+static void drm_test_connector_hdmi_init_vendor_length_exact(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const char *vendor_name = "VendorVe";
+ int ret;
+
+ KUNIT_ASSERT_EQ(test, strlen(vendor_name), DRM_CONNECTOR_HDMI_VENDOR_LEN);
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ vendor_name, "Product",
+ &dummy_funcs,
+ &dummy_hdmi_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+ KUNIT_EXPECT_EQ(test,
+ strncmp(priv->connector.hdmi.vendor,
+ vendor_name,
+ DRM_CONNECTOR_HDMI_VENDOR_LEN),
+ 0);
+}
+
+/*
+ * Test that the registration of a connector with a vendor name larger
+ * than the maximum length fails.
+ */
+static void drm_test_connector_hdmi_init_vendor_length_too_long(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const char *vendor_name = "VendorVendor";
+ int ret;
+
+ KUNIT_ASSERT_GT(test, strlen(vendor_name), DRM_CONNECTOR_HDMI_VENDOR_LEN);
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ vendor_name, "Product",
+ &dummy_funcs,
+ &dummy_hdmi_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
/*
* Test that the registration of a connector with an invalid maximum bpc
* count fails.
@@ -350,6 +554,7 @@ static void drm_test_connector_hdmi_init_bpc_invalid(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -369,6 +574,7 @@ static void drm_test_connector_hdmi_init_bpc_null(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -392,6 +598,7 @@ static void drm_test_connector_hdmi_init_bpc_8(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -427,6 +634,7 @@ static void drm_test_connector_hdmi_init_bpc_10(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -462,6 +670,7 @@ static void drm_test_connector_hdmi_init_bpc_12(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -493,6 +702,7 @@ static void drm_test_connector_hdmi_init_formats_empty(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -512,6 +722,7 @@ static void drm_test_connector_hdmi_init_formats_no_rgb(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -532,6 +743,7 @@ static void drm_test_connector_hdmi_init_type_valid(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
connector_type,
@@ -566,6 +778,7 @@ static void drm_test_connector_hdmi_init_type_invalid(struct kunit *test)
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
connector_type,
@@ -615,6 +828,14 @@ static struct kunit_case drmm_connector_hdmi_init_tests[] = {
KUNIT_CASE(drm_test_connector_hdmi_init_null_device),
KUNIT_CASE(drm_test_connector_hdmi_init_null_funcs),
KUNIT_CASE(drm_test_connector_hdmi_init_null_hdmi_funcs),
+ KUNIT_CASE(drm_test_connector_hdmi_init_null_product),
+ KUNIT_CASE(drm_test_connector_hdmi_init_null_vendor),
+ KUNIT_CASE(drm_test_connector_hdmi_init_product_length_exact),
+ KUNIT_CASE(drm_test_connector_hdmi_init_product_length_too_long),
+ KUNIT_CASE(drm_test_connector_hdmi_init_product_valid),
+ KUNIT_CASE(drm_test_connector_hdmi_init_vendor_length_exact),
+ KUNIT_CASE(drm_test_connector_hdmi_init_vendor_length_too_long),
+ KUNIT_CASE(drm_test_connector_hdmi_init_vendor_valid),
KUNIT_CASE_PARAM(drm_test_connector_hdmi_init_type_valid,
drm_connector_hdmi_init_type_valid_gen_params),
KUNIT_CASE_PARAM(drm_test_connector_hdmi_init_type_invalid,
@@ -835,6 +1056,7 @@ static void drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector(
int ret;

ret = drmm_connector_hdmi_init(&priv->drm, connector,
+ "Vendor", "Product",
&dummy_funcs,
&dummy_hdmi_funcs,
DRM_MODE_CONNECTOR_HDMIA,
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index 8072ac18e536..22f083968aa8 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -40,6 +40,8 @@ struct drm_private_state;
struct drm_modeset_acquire_ctx;
struct drm_device;

+struct hdmi_audio_infoframe;
+
void __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *state,
struct drm_crtc *crtc);
void __drm_atomic_helper_crtc_reset(struct drm_crtc *crtc,
@@ -89,6 +91,11 @@ __drm_atomic_helper_connector_destroy_state(struct drm_connector_state *state);
void drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
struct drm_connector_state *state);

+int drm_atomic_helper_connector_hdmi_update_audio_infoframe(struct drm_connector *connector,
+ struct hdmi_audio_infoframe *frame);
+int drm_atomic_helper_connector_hdmi_update_infoframes(struct drm_connector *connector,
+ struct drm_atomic_state *state);
+
void __drm_atomic_helper_private_obj_duplicate_state(struct drm_private_obj *obj,
struct drm_private_state *state);

diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 3eaf4d54364d..f257cf101f9e 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -914,6 +914,21 @@ struct drm_tv_connector_state {
unsigned int hue;
};

+/**
+ * struct drm_connector_hdmi_infoframe - HDMI Infoframe container
+ */
+struct drm_connector_hdmi_infoframe {
+ /**
+ * @data: HDMI Infoframe structure
+ */
+ union hdmi_infoframe data;
+
+ /**
+ * @set: Is the content of @data valid?
+ */
+ bool set;
+};
+
/**
* struct drm_connector_state - mutable connector state
*/
@@ -1070,6 +1085,35 @@ struct drm_connector_state {
*/
enum drm_hdmi_broadcast_rgb broadcast_rgb;

+ /**
+ * @infoframes: HDMI Infoframes matching that state
+ */
+ struct {
+ /**
+ * @avi: AVI Infoframes structure matching our
+ * state.
+ */
+ struct drm_connector_hdmi_infoframe avi;
+
+ /**
+ * @hdr_drm: DRM (Dynamic Range and Mastering)
+ * Infoframes structure matching our state.
+ */
+ struct drm_connector_hdmi_infoframe hdr_drm;
+
+ /**
+ * @spd: SPD Infoframes structure matching our
+ * state.
+ */
+ struct drm_connector_hdmi_infoframe spd;
+
+ /**
+ * @vendor: HDMI Vendor Infoframes structure
+ * matching our state.
+ */
+ struct drm_connector_hdmi_infoframe hdmi;
+ } infoframes;
+
/**
* @is_full_range: Is the output supposed to use a full
* RGB Quantization Range or not?
@@ -1115,6 +1159,41 @@ struct drm_connector_hdmi_funcs {
(*tmds_char_rate_valid)(const struct drm_connector *connector,
const struct drm_display_mode *mode,
unsigned long long tmds_rate);
+
+ /**
+ * @clear_infoframe:
+ *
+ * This callback is invoked through
+ * @drm_atomic_helper_hdmi_connector_update_infoframes during a
+ * commit to clear the infoframes into the hardware. It will be
+ * called multiple times, once for every disabled infoframe
+ * type.
+ *
+ * The @clear_infoframe callback is optional.
+ *
+ * Returns:
+ * 0 on success, a negative error code otherwise
+ */
+ int (*clear_infoframe)(struct drm_connector *connector,
+ enum hdmi_infoframe_type type);
+
+ /**
+ * @write_infoframe:
+ *
+ * This callback is invoked through
+ * @drm_atomic_helper_hdmi_connector_update_infoframes during a
+ * commit to program the infoframes into the hardware. It will
+ * be called multiple times, once for every updated infoframe
+ * type.
+ *
+ * The @write_infoframe callback is mandatory.
+ *
+ * Returns:
+ * 0 on success, a negative error code otherwise
+ */
+ int (*write_infoframe)(struct drm_connector *connector,
+ enum hdmi_infoframe_type type,
+ const u8 *buffer, size_t len);
};

/**
@@ -1986,6 +2065,18 @@ struct drm_connector {
* @hdmi: HDMI-related variable and properties.
*/
struct {
+#define DRM_CONNECTOR_HDMI_VENDOR_LEN 8
+ /**
+ * @vendor: HDMI Controller Vendor Name
+ */
+ char vendor[DRM_CONNECTOR_HDMI_VENDOR_LEN];
+
+#define DRM_CONNECTOR_HDMI_PRODUCT_LEN 16
+ /**
+ * @product: HDMI Controller Product Name
+ */
+ char product[DRM_CONNECTOR_HDMI_PRODUCT_LEN];
+
/**
* @supported_formats: Bitmask of @hdmi_colorspace
* supported by the controller.
@@ -1996,6 +2087,47 @@ struct drm_connector {
* @funcs: HDMI connector Control Functions
*/
const struct drm_connector_hdmi_funcs *funcs;
+
+ /**
+ * @infoframes: Current Infoframes output by the connector
+ */
+ struct {
+ /**
+ * @lock: Mutex protecting against concurrent access to
+ * the infoframes, most notably between KMS and ALSA.
+ */
+ struct mutex lock;
+
+ /**
+ * @audio: Current Audio Infoframes structure. Protected
+ * by @lock.
+ */
+ struct drm_connector_hdmi_infoframe audio;
+
+ /**
+ * @avi: Current AVI Infoframes structure. Protected by
+ * @lock.
+ */
+ struct drm_connector_hdmi_infoframe avi;
+
+ /**
+ * @hdr_drm: Current DRM (Dynamic Range and Mastering)
+ * Infoframes structure. Protected by @lock.
+ */
+ struct drm_connector_hdmi_infoframe hdr_drm;
+
+ /**
+ * @spd: Current SPD Infoframes structure. Protected by
+ * @lock.
+ */
+ struct drm_connector_hdmi_infoframe spd;
+
+ /**
+ * @vendor: Current HDMI Vendor Infoframes structure.
+ * Protected by @lock.
+ */
+ struct drm_connector_hdmi_infoframe hdmi;
+ } infoframes;
} hdmi;
};

@@ -2017,6 +2149,7 @@ int drmm_connector_init(struct drm_device *dev,
struct i2c_adapter *ddc);
int drmm_connector_hdmi_init(struct drm_device *dev,
struct drm_connector *connector,
+ const char *vendor, const char *product,
const struct drm_connector_funcs *funcs,
const struct drm_connector_hdmi_funcs *hdmi_funcs,
int connector_type,

--
2.41.0

2023-11-28 10:27:28

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 13/45] drm/connector: hdmi: Add HDMI compute clock helper

A lot of HDMI drivers have some variation of the formula to calculate
the TMDS character rate from a mode, but few of them actually take all
parameters into account.

Let's create a helper to provide that rate taking all parameters into
account.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_connector.c | 59 ++++++
drivers/gpu/drm/tests/drm_connector_test.c | 323 +++++++++++++++++++++++++++++
include/drm/drm_connector.h | 5 +
3 files changed, 387 insertions(+)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index e465109f131b..5eefeb868dbb 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -2976,6 +2976,65 @@ void drm_connector_update_privacy_screen(const struct drm_connector_state *conne
}
EXPORT_SYMBOL(drm_connector_update_privacy_screen);

+/**
+ * drm_connector_hdmi_compute_mode_clock() - Computes the TMDS Character Rate
+ * @mode: Display mode to compute the clock for
+ * @bpc: Bits per character
+ * @fmt: Output Pixel Format used
+ *
+ * Returns the TMDS Character Rate for a given mode, bpc count and output format.
+ *
+ * RETURNS:
+ * The TMDS Character Rate, in Hertz, or 0 on error.
+ */
+unsigned long long
+drm_connector_hdmi_compute_mode_clock(const struct drm_display_mode *mode,
+ unsigned int bpc,
+ enum hdmi_colorspace fmt)
+{
+ unsigned long long clock = mode->clock * 1000ULL;
+ unsigned int vic = drm_match_cea_mode(mode);
+
+ /*
+ * CTA-861-G Spec, section 5.4 - Color Coding and Quantization
+ * mandates that VIC 1 always uses 8 bpc.
+ */
+ if (vic == 1 && bpc != 8)
+ return 0;
+
+ /*
+ * HDMI 2.0 Spec, section 7.1 - YCbCr 4:2:0 Pixel Encoding
+ * specifies that YUV420 encoding is only available for those
+ * VICs.
+ */
+ if (fmt == HDMI_COLORSPACE_YUV420 &&
+ !(vic == 96 || vic == 97 || vic == 101 ||
+ vic == 102 || vic == 106 || vic == 107))
+ return 0;
+
+ /*
+ * HDMI 1.4b Spec, section 6.2.3 - Pixel Encoding Requirements
+ * specifies that YUV422 is 36-bit only.
+ */
+ if (fmt == HDMI_COLORSPACE_YUV422 && bpc != 12)
+ return 0;
+
+ if (fmt == HDMI_COLORSPACE_YUV420)
+ clock = clock / 2;
+
+ if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+ clock = clock * 2;
+
+ if (fmt == HDMI_COLORSPACE_YUV422)
+ bpc = 8;
+
+ clock = clock * bpc;
+ do_div(clock, 8);
+
+ return clock;
+}
+EXPORT_SYMBOL(drm_connector_hdmi_compute_mode_clock);
+
int drm_connector_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
index 502b7f9c1151..5262118cde85 100644
--- a/drivers/gpu/drm/tests/drm_connector_test.c
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -8,7 +8,9 @@
#include <drm/drm_atomic_state_helper.h>
#include <drm/drm_connector.h>
#include <drm/drm_drv.h>
+#include <drm/drm_edid.h>
#include <drm/drm_kunit_helpers.h>
+#include <drm/drm_modes.h>

#include <kunit/test.h>

@@ -823,10 +825,331 @@ static struct kunit_suite drm_connector_attach_broadcast_rgb_property_test_suite
.test_cases = drm_connector_attach_broadcast_rgb_property_tests,
};

+/*
+ * Test that for a given mode, with 8bpc and an RGB output the TMDS
+ * character rate is equal to the mode pixel clock.
+ */
+static void drm_test_drm_connector_hdmi_compute_mode_clock_rgb(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ unsigned long long rate;
+ struct drm_device *drm = &priv->drm;
+
+ mode = drm_display_mode_from_cea_vic(drm, 16);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, mode->clock * 1000ULL, rate);
+}
+
+/*
+ * Test that for a given mode, with 10bpc and an RGB output the TMDS
+ * character rate is equal to 1.25 times the mode pixel clock.
+ */
+static void drm_test_drm_connector_hdmi_compute_mode_clock_rgb_10bpc(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ unsigned long long rate;
+ struct drm_device *drm = &priv->drm;
+
+ mode = drm_display_mode_from_cea_vic(drm, 16);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 10, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, mode->clock * 1250, rate);
+}
+
+/*
+ * Test that for the VIC-1 mode, with 10bpc and an RGB output the TMDS
+ * character rate computation fails.
+ */
+static void drm_test_drm_connector_hdmi_compute_mode_clock_rgb_10bpc_vic_1(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ unsigned long long rate;
+ struct drm_device *drm = &priv->drm;
+
+ mode = drm_display_mode_from_cea_vic(drm, 1);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 10, HDMI_COLORSPACE_RGB);
+ KUNIT_EXPECT_EQ(test, rate, 0);
+}
+
+/*
+ * Test that for a given mode, with 12bpc and an RGB output the TMDS
+ * character rate is equal to 1.5 times the mode pixel clock.
+ */
+static void drm_test_drm_connector_hdmi_compute_mode_clock_rgb_12bpc(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ unsigned long long rate;
+ struct drm_device *drm = &priv->drm;
+
+ mode = drm_display_mode_from_cea_vic(drm, 16);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, mode->clock * 1500, rate);
+}
+
+/*
+ * Test that for the VIC-1 mode, with 12bpc and an RGB output the TMDS
+ * character rate computation fails.
+ */
+static void drm_test_drm_connector_hdmi_compute_mode_clock_rgb_12bpc_vic_1(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ unsigned long long rate;
+ struct drm_device *drm = &priv->drm;
+
+ mode = drm_display_mode_from_cea_vic(drm, 1);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_EXPECT_EQ(test, rate, 0);
+}
+
+/*
+ * Test that for a mode with the pixel repetition flag, the TMDS
+ * character rate is indeed double the mode pixel clock.
+ */
+static void drm_test_drm_connector_hdmi_compute_mode_clock_rgb_double(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ unsigned long long rate;
+ struct drm_device *drm = &priv->drm;
+
+ mode = drm_display_mode_from_cea_vic(drm, 6);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_TRUE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, (mode->clock * 1000ULL) * 2, rate);
+}
+
+/*
+ * Test that the TMDS character rate computation for the VIC modes
+ * explicitly listed in the spec as supporting YUV420 succeed and return
+ * half the mode pixel clock.
+ */
+static void drm_test_connector_hdmi_compute_mode_clock_yuv420_valid(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ struct drm_device *drm = &priv->drm;
+ unsigned long long rate;
+ unsigned int vic = *(unsigned int *)test->param_value;
+
+ mode = drm_display_mode_from_cea_vic(drm, vic);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_YUV420);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, (mode->clock * 1000ULL) / 2, rate);
+}
+
+static const unsigned int drm_connector_hdmi_compute_mode_clock_yuv420_vic_valid_tests[] = {
+ 96, 97, 101, 102, 106, 107,
+};
+
+static void drm_connector_hdmi_compute_mode_clock_yuv420_vic_desc(const unsigned int *vic, char *desc)
+{
+ sprintf(desc, "VIC %u", *vic);
+}
+
+KUNIT_ARRAY_PARAM(drm_connector_hdmi_compute_mode_clock_yuv420_valid,
+ drm_connector_hdmi_compute_mode_clock_yuv420_vic_valid_tests,
+ drm_connector_hdmi_compute_mode_clock_yuv420_vic_desc);
+
+/*
+ * Test that trying to compute the TMDS char rate with the YUV420 format
+ * for a mode that doesn't support the YUV420 encoding returns an error.
+ *
+ * TODO: We should probably test this with all the VIC but the
+ * explicitly supported ones. Since the list of VIC is quite long and
+ * not linear, the best way to support it at the moment would be to
+ * create a custom gen_params function that would only return valid
+ * VICs. At the moment, that function expects to get a pointer back
+ * however, and compilers don't really like casting between integer and
+ * pointers.
+ */
+static void drm_test_connector_hdmi_compute_mode_clock_yuv420_invalid(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ struct drm_device *drm = &priv->drm;
+ unsigned long long rate;
+
+ mode = drm_display_mode_from_cea_vic(drm, 42);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_YUV420);
+ KUNIT_EXPECT_EQ(test, rate, 0);
+}
+
+/*
+ * Test that for a given mode listed supporting it and an YUV420 output
+ * with 10bpc, the TMDS character rate is equal to 0.625 times the mode
+ * pixel clock.
+ */
+static void drm_test_connector_hdmi_compute_mode_clock_yuv420_10_bpc(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ struct drm_device *drm = &priv->drm;
+ unsigned int vic =
+ drm_connector_hdmi_compute_mode_clock_yuv420_vic_valid_tests[0];
+ unsigned long long rate;
+
+ mode = drm_display_mode_from_cea_vic(drm, vic);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 10, HDMI_COLORSPACE_YUV420);
+ KUNIT_ASSERT_GT(test, rate, 0);
+
+ KUNIT_EXPECT_EQ(test, mode->clock * 625, rate);
+}
+
+/*
+ * Test that for a given mode listed supporting it and an YUV420 output
+ * with 12bpc, the TMDS character rate is equal to 0.75 times the mode
+ * pixel clock.
+ */
+static void drm_test_connector_hdmi_compute_mode_clock_yuv420_12_bpc(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ struct drm_device *drm = &priv->drm;
+ unsigned int vic =
+ drm_connector_hdmi_compute_mode_clock_yuv420_vic_valid_tests[0];
+ unsigned long long rate;
+
+ mode = drm_display_mode_from_cea_vic(drm, vic);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 12, HDMI_COLORSPACE_YUV420);
+ KUNIT_ASSERT_GT(test, rate, 0);
+
+ KUNIT_EXPECT_EQ(test, mode->clock * 750, rate);
+}
+
+/*
+ * Test that for a given mode, the computation of the TMDS character
+ * rate with 8bpc and a YUV422 output fails.
+ */
+static void drm_test_connector_hdmi_compute_mode_clock_yuv422_8_bpc(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ struct drm_device *drm = &priv->drm;
+ unsigned long long rate;
+
+ mode = drm_display_mode_from_cea_vic(drm, 16);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_YUV422);
+ KUNIT_EXPECT_EQ(test, rate, 0);
+}
+
+/*
+ * Test that for a given mode, the computation of the TMDS character
+ * rate with 10bpc and a YUV422 output fails.
+ */
+static void drm_test_connector_hdmi_compute_mode_clock_yuv422_10_bpc(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ struct drm_device *drm = &priv->drm;
+ unsigned long long rate;
+
+ mode = drm_display_mode_from_cea_vic(drm, 16);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 10, HDMI_COLORSPACE_YUV422);
+ KUNIT_EXPECT_EQ(test, rate, 0);
+}
+
+/*
+ * Test that for a given mode, the computation of the TMDS character
+ * rate with 12bpc and a YUV422 output succeeds and returns a rate equal
+ * to the mode pixel clock.
+ */
+static void drm_test_connector_hdmi_compute_mode_clock_yuv422_12_bpc(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ const struct drm_display_mode *mode;
+ struct drm_device *drm = &priv->drm;
+ unsigned long long rate;
+
+ mode = drm_display_mode_from_cea_vic(drm, 16);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_ASSERT_FALSE(test, mode->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 12, HDMI_COLORSPACE_YUV422);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, mode->clock * 1000, rate);
+}
+
+static struct kunit_case drm_connector_hdmi_compute_mode_clock_tests[] = {
+ KUNIT_CASE(drm_test_drm_connector_hdmi_compute_mode_clock_rgb),
+ KUNIT_CASE(drm_test_drm_connector_hdmi_compute_mode_clock_rgb_10bpc),
+ KUNIT_CASE(drm_test_drm_connector_hdmi_compute_mode_clock_rgb_10bpc_vic_1),
+ KUNIT_CASE(drm_test_drm_connector_hdmi_compute_mode_clock_rgb_12bpc),
+ KUNIT_CASE(drm_test_drm_connector_hdmi_compute_mode_clock_rgb_12bpc_vic_1),
+ KUNIT_CASE(drm_test_drm_connector_hdmi_compute_mode_clock_rgb_double),
+ KUNIT_CASE_PARAM(drm_test_connector_hdmi_compute_mode_clock_yuv420_valid,
+ drm_connector_hdmi_compute_mode_clock_yuv420_valid_gen_params),
+ KUNIT_CASE(drm_test_connector_hdmi_compute_mode_clock_yuv420_invalid),
+ KUNIT_CASE(drm_test_connector_hdmi_compute_mode_clock_yuv420_10_bpc),
+ KUNIT_CASE(drm_test_connector_hdmi_compute_mode_clock_yuv420_12_bpc),
+ KUNIT_CASE(drm_test_connector_hdmi_compute_mode_clock_yuv422_8_bpc),
+ KUNIT_CASE(drm_test_connector_hdmi_compute_mode_clock_yuv422_10_bpc),
+ KUNIT_CASE(drm_test_connector_hdmi_compute_mode_clock_yuv422_12_bpc),
+ { }
+};
+
+static struct kunit_suite drm_connector_hdmi_compute_mode_clock_test_suite = {
+ .name = "drm_test_connector_hdmi_compute_mode_clock",
+ .init = drm_test_connector_init,
+ .test_cases = drm_connector_hdmi_compute_mode_clock_tests,
+};
+
kunit_test_suites(
&drmm_connector_hdmi_init_test_suite,
&drmm_connector_init_test_suite,
&drm_connector_attach_broadcast_rgb_property_test_suite,
+ &drm_connector_hdmi_compute_mode_clock_test_suite,
&drm_get_tv_mode_from_name_test_suite,
&drm_hdmi_connector_get_broadcast_rgb_name_test_suite,
&drm_hdmi_connector_get_output_format_name_test_suite
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 74db5ce47e01..0cc5a8732664 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -38,6 +38,7 @@ struct drm_connector_helper_funcs;
struct drm_modeset_acquire_ctx;
struct drm_device;
struct drm_crtc;
+struct drm_display_mode;
struct drm_encoder;
struct drm_panel;
struct drm_property;
@@ -2136,6 +2137,10 @@ void drm_connector_attach_privacy_screen_properties(struct drm_connector *conn);
void drm_connector_attach_privacy_screen_provider(
struct drm_connector *connector, struct drm_privacy_screen *priv);
void drm_connector_update_privacy_screen(const struct drm_connector_state *connector_state);
+unsigned long long
+drm_connector_hdmi_compute_mode_clock(const struct drm_display_mode *mode,
+ unsigned int bpc,
+ enum hdmi_colorspace fmt);

/**
* struct drm_tile_group - Tile group metadata

--
2.41.0

2023-11-28 10:27:33

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 18/45] drm/connector: hdmi: Create Infoframe DebugFS entries

There has been some discussions recently about the infoframes sent by
drivers and if they were properly generated.

In parallel, there's been some interest in creating an infoframe-decode
tool similar to edid-decode.

Both would be much easier if we were to expose the infoframes programmed
in the hardware. It won't be perfect since we have no guarantee that
it's actually what goes through the wire, but it's the best we can do.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_debugfs.c | 110 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 110 insertions(+)

diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index f291fb4b359f..59bf4dd0cbd6 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -524,6 +524,114 @@ static const struct file_operations drm_connector_fops = {
.write = connector_write
};

+struct debugfs_wrapper {
+ struct drm_connector *connector;
+ struct drm_connector_hdmi_infoframe *frame;
+};
+
+#define HDMI_MAX_INFOFRAME_SIZE 29
+
+static ssize_t
+infoframe_read(struct file *filp, char __user *ubuf, size_t count, loff_t *ppos)
+{
+ const struct debugfs_wrapper *wrapper = filp->private_data;
+ struct drm_connector *connector = wrapper->connector;
+ struct drm_connector_hdmi_infoframe *infoframe = wrapper->frame;
+ union hdmi_infoframe *frame = &infoframe->data;
+ u8 buf[HDMI_MAX_INFOFRAME_SIZE];
+ ssize_t len = 0;
+
+ mutex_lock(&connector->hdmi.infoframes.lock);
+
+ if (!infoframe->set)
+ goto out;
+
+ len = hdmi_infoframe_pack(frame, buf, sizeof(buf));
+ if (len < 0)
+ goto out;
+
+ len = simple_read_from_buffer(ubuf, count, ppos, buf, len);
+
+out:
+ mutex_unlock(&connector->hdmi.infoframes.lock);
+ return len;
+}
+
+static const struct file_operations infoframe_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = infoframe_read,
+};
+
+static int create_hdmi_infoframe_file(struct drm_connector *connector,
+ struct dentry *parent,
+ const char *filename,
+ struct drm_connector_hdmi_infoframe *frame)
+{
+ struct drm_device *dev = connector->dev;
+ struct debugfs_wrapper *wrapper;
+ struct dentry *file;
+
+ wrapper = drmm_kzalloc(dev, sizeof(*wrapper), GFP_KERNEL);
+ if (!wrapper)
+ return -ENOMEM;
+
+ wrapper->connector = connector;
+ wrapper->frame = frame;
+
+ file = debugfs_create_file(filename, 0400, parent, wrapper, &infoframe_fops);
+ if (IS_ERR(file))
+ return PTR_ERR(file);
+
+ return 0;
+}
+
+#define CREATE_HDMI_INFOFRAME_FILE(c, p, i) \
+ create_hdmi_infoframe_file(c, p, #i, &(c)->hdmi.infoframes.i)
+
+static int create_hdmi_infoframe_files(struct drm_connector *connector,
+ struct dentry *parent)
+{
+ int ret;
+
+ ret = CREATE_HDMI_INFOFRAME_FILE(connector, parent, audio);
+ if (ret)
+ return ret;
+
+ ret = CREATE_HDMI_INFOFRAME_FILE(connector, parent, avi);
+ if (ret)
+ return ret;
+
+ ret = CREATE_HDMI_INFOFRAME_FILE(connector, parent, hdr_drm);
+ if (ret)
+ return ret;
+
+ ret = CREATE_HDMI_INFOFRAME_FILE(connector, parent, spd);
+ if (ret)
+ return ret;
+
+ ret = CREATE_HDMI_INFOFRAME_FILE(connector, parent, hdmi);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void hdmi_debugfs_add(struct drm_connector *connector)
+{
+ struct dentry *dir;
+
+ if (!(connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+ connector->connector_type == DRM_MODE_CONNECTOR_HDMIB))
+ return;
+
+ dir = debugfs_create_dir("infoframes", connector->debugfs_entry);
+ if (IS_ERR(dir))
+ return;
+
+ create_hdmi_infoframe_files(connector, dir);
+}
+
void drm_debugfs_connector_add(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
@@ -551,6 +659,8 @@ void drm_debugfs_connector_add(struct drm_connector *connector)
debugfs_create_file("output_bpc", 0444, root, connector,
&output_bpc_fops);

+ hdmi_debugfs_add(connector);
+
if (connector->funcs->debugfs_init)
connector->funcs->debugfs_init(connector, root);
}

--
2.41.0

2023-11-28 10:27:52

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 22/45] drm/vc4: tests: Convert to plane creation helper

Now that we have a plane create helper for kunit mocked drivers, let's
convert to it in vc4.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/vc4/tests/vc4_mock_plane.c | 34 +++++++-----------------------
1 file changed, 8 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/vc4/tests/vc4_mock_plane.c b/drivers/gpu/drm/vc4/tests/vc4_mock_plane.c
index 973f5f929097..14357db82238 100644
--- a/drivers/gpu/drm/vc4/tests/vc4_mock_plane.c
+++ b/drivers/gpu/drm/vc4/tests/vc4_mock_plane.c
@@ -1,43 +1,25 @@
// SPDX-License-Identifier: GPL-2.0

-#include <drm/drm_atomic_state_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_kunit_helpers.h>
#include <drm/drm_plane.h>

#include <kunit/test.h>

#include "vc4_mock.h"

-static const struct drm_plane_helper_funcs vc4_dummy_plane_helper_funcs = {
-};
-
-static const struct drm_plane_funcs vc4_dummy_plane_funcs = {
- .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
- .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
- .reset = drm_atomic_helper_plane_reset,
-};
-
-static const uint32_t vc4_dummy_plane_formats[] = {
- DRM_FORMAT_XRGB8888,
-};
-
struct drm_plane *vc4_dummy_plane(struct kunit *test, struct drm_device *drm,
enum drm_plane_type type)
{
struct drm_plane *plane;

- plane = __drmm_universal_plane_alloc(drm, sizeof(struct drm_plane), 0,
- 0,
- &vc4_dummy_plane_funcs,
- vc4_dummy_plane_formats,
- ARRAY_SIZE(vc4_dummy_plane_formats),
- NULL,
- DRM_PLANE_TYPE_PRIMARY,
- NULL);
+ KUNIT_ASSERT_EQ(test, type, DRM_PLANE_TYPE_PRIMARY);
+
+ plane = drm_kunit_helper_create_primary_plane(test, drm,
+ NULL,
+ NULL,
+ NULL, 0,
+ NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, plane);

- drm_plane_helper_add(plane, &vc4_dummy_plane_helper_funcs);
-
return plane;
}

--
2.41.0

2023-11-28 10:27:54

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 19/45] drm/vc4: hdmi: Create destroy state implementation

Even though we were rolling our own custom state for the vc4 HDMI
controller driver, we were still using the generic helper to destroy
that state.

It was mostly working since the underlying state is the first member of
our state so the pointers are probably equal in all relevant cases, but
it's still fragile so let's fix this properly.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 25c9c71256d3..f05e2c95a60d 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -672,11 +672,21 @@ vc4_hdmi_connector_duplicate_state(struct drm_connector *connector)
return &new_state->base;
}

+static void vc4_hdmi_connector_destroy_state(struct drm_connector *connector,
+ struct drm_connector_state *state)
+{
+ struct vc4_hdmi_connector_state *vc4_state =
+ conn_state_to_vc4_hdmi_conn_state(state);
+
+ __drm_atomic_helper_connector_destroy_state(state);
+ kfree(vc4_state);
+}
+
static const struct drm_connector_funcs vc4_hdmi_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.reset = vc4_hdmi_connector_reset,
.atomic_duplicate_state = vc4_hdmi_connector_duplicate_state,
- .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+ .atomic_destroy_state = vc4_hdmi_connector_destroy_state,
.atomic_get_property = vc4_hdmi_connector_get_property,
.atomic_set_property = vc4_hdmi_connector_set_property,
};

--
2.41.0

2023-11-28 10:27:58

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 10/45] drm/connector: hdmi: Add RGB Quantization Range to the connector state

HDMI controller drivers will need to figure out the RGB range they need
to configure based on a mode and property values. Let's expose that in
the HDMI connector state so drivers can just use that value.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_atomic.c | 4 +-
drivers/gpu/drm/drm_atomic_state_helper.c | 44 +++
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 335 +++++++++++++++++++++
include/drm/drm_atomic_state_helper.h | 1 +
include/drm/drm_connector.h | 6 +
5 files changed, 389 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index de7cdc36a245..5708a53bee93 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1143,9 +1143,11 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
drm_printf(p, "\tcolorspace=%s\n", drm_get_colorspace_name(state->colorspace));

if (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
- connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)
+ connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) {
drm_printf(p, "\tbroadcast_rgb=%s\n",
drm_hdmi_connector_get_broadcast_rgb_name(state->hdmi.broadcast_rgb));
+ drm_printf(p, "\tis_full_range=%c\n", state->hdmi.is_full_range ? 'y' : 'n');
+ }

if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
if (state->writeback_job && state->writeback_job->fb)
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 37193c6f9fca..d0c24971537b 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -31,6 +31,7 @@
#include <drm/drm_connector.h>
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
+#include <drm/drm_edid.h>
#include <drm/drm_framebuffer.h>
#include <drm/drm_plane.h>
#include <drm/drm_print.h>
@@ -622,6 +623,47 @@ int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
}
EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);

+static const struct drm_display_mode *
+connector_state_get_mode(const struct drm_connector_state *conn_state)
+{
+ struct drm_atomic_state *state;
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+
+ state = conn_state->state;
+ if (!state)
+ return NULL;
+
+ crtc = conn_state->crtc;
+ if (!crtc)
+ return NULL;
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ if (!crtc_state)
+ return NULL;
+
+ return &crtc_state->mode;
+}
+
+static bool hdmi_is_full_range(const struct drm_connector *connector,
+ const struct drm_connector_state *state)
+{
+ const struct drm_display_info *display = &connector->display_info;
+ const struct drm_display_mode *mode =
+ connector_state_get_mode(state);
+
+ if (state->hdmi.broadcast_rgb == DRM_HDMI_BROADCAST_RGB_FULL)
+ return true;
+
+ if (state->hdmi.broadcast_rgb == DRM_HDMI_BROADCAST_RGB_LIMITED)
+ return false;
+
+ if (!display->is_hdmi)
+ return true;
+
+ return drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL ? true : false;
+}
+
/**
* drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
* @connector: DRM Connector
@@ -642,6 +684,8 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
struct drm_connector_state *new_state =
drm_atomic_get_new_connector_state(state, connector);

+ new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);
+
if (old_state->hdmi.broadcast_rgb != new_state->hdmi.broadcast_rgb) {
struct drm_crtc *crtc = new_state->crtc;
struct drm_crtc_state *crtc_state;
diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
index 21e6f796ee13..7750c3d214a4 100644
--- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
@@ -328,7 +328,342 @@ static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *tes
KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
}

+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to auto with a mode that isn't the
+ * VIC-1 mode, we will get a limited RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_auto_cea_mode(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ KUNIT_ASSERT_EQ(test,
+ conn_state->hdmi.broadcast_rgb,
+ DRM_HDMI_BROADCAST_RGB_AUTO);
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to auto with a VIC-1 mode, we will get
+ * a full RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_auto_cea_mode_vic_1(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *mode;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ mode = drm_display_mode_from_cea_vic(drm, 1);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ KUNIT_ASSERT_EQ(test,
+ conn_state->hdmi.broadcast_rgb,
+ DRM_HDMI_BROADCAST_RGB_AUTO);
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_full_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to full with a mode that isn't the
+ * VIC-1 mode, we will get a full RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_full_cea_mode(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_FULL;
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ KUNIT_ASSERT_EQ(test,
+ conn_state->hdmi.broadcast_rgb,
+ DRM_HDMI_BROADCAST_RGB_FULL);
+
+ KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_full_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to full with a VIC-1 mode, we will get
+ * a full RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_full_cea_mode_vic_1(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *mode;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ mode = drm_display_mode_from_cea_vic(drm, 1);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_FULL;
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ KUNIT_ASSERT_EQ(test,
+ conn_state->hdmi.broadcast_rgb,
+ DRM_HDMI_BROADCAST_RGB_FULL);
+
+ KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_full_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to limited with a mode that isn't the
+ * VIC-1 mode, we will get a limited RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_limited_cea_mode(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_LIMITED;
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ KUNIT_ASSERT_EQ(test,
+ conn_state->hdmi.broadcast_rgb,
+ DRM_HDMI_BROADCAST_RGB_LIMITED);
+
+ KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to limited with a VIC-1 mode, we will
+ * get a limited RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *mode;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ mode = drm_display_mode_from_cea_vic(drm, 1);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_LIMITED;
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+ KUNIT_ASSERT_EQ(test,
+ conn_state->hdmi.broadcast_rgb,
+ DRM_HDMI_BROADCAST_RGB_LIMITED);
+
+ KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
+}
+
static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
+ KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
+ KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
+ KUNIT_CASE(drm_test_check_broadcast_rgb_full_cea_mode),
+ KUNIT_CASE(drm_test_check_broadcast_rgb_full_cea_mode_vic_1),
+ KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode),
+ KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode_vic_1),
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
{ }
diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
index d59d2b3aef9a..8072ac18e536 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -88,6 +88,7 @@ void
__drm_atomic_helper_connector_destroy_state(struct drm_connector_state *state);
void drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
struct drm_connector_state *state);
+
void __drm_atomic_helper_private_obj_duplicate_state(struct drm_private_obj *obj,
struct drm_private_state *state);

diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 3867a4c01b78..76eecd449fb8 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1066,6 +1066,12 @@ struct drm_connector_state {
* Broadcast RGB selection value.
*/
enum drm_hdmi_broadcast_rgb broadcast_rgb;
+
+ /**
+ * @is_full_range: Is the output supposed to use a full
+ * RGB Quantization Range or not?
+ */
+ bool is_full_range;
} hdmi;
};


--
2.41.0

2023-11-28 10:28:01

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 21/45] drm/vc4: tests: Remove vc4_dummy_plane structure

The vc4_dummy_plane structure is an exact equivalent to vc4_plane, so we
don't need it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/vc4/tests/vc4_mock.c | 6 ++----
drivers/gpu/drm/vc4/tests/vc4_mock.h | 9 ++-------
drivers/gpu/drm/vc4/tests/vc4_mock_plane.c | 14 +++++---------
3 files changed, 9 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/vc4/tests/vc4_mock.c b/drivers/gpu/drm/vc4/tests/vc4_mock.c
index 63ca46f4cb35..1c1be39141ba 100644
--- a/drivers/gpu/drm/vc4/tests/vc4_mock.c
+++ b/drivers/gpu/drm/vc4/tests/vc4_mock.c
@@ -109,16 +109,14 @@ static const struct vc4_mock_desc vc5_mock =
static int __build_one_pipe(struct kunit *test, struct drm_device *drm,
const struct vc4_mock_pipe_desc *pipe)
{
- struct vc4_dummy_plane *dummy_plane;
struct drm_plane *plane;
struct vc4_dummy_crtc *dummy_crtc;
struct drm_crtc *crtc;
unsigned int i;

- dummy_plane = vc4_dummy_plane(test, drm, DRM_PLANE_TYPE_PRIMARY);
- KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dummy_plane);
+ plane = vc4_dummy_plane(test, drm, DRM_PLANE_TYPE_PRIMARY);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, plane);

- plane = &dummy_plane->plane.base;
dummy_crtc = vc4_mock_pv(test, drm, plane, pipe->data);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dummy_crtc);

diff --git a/drivers/gpu/drm/vc4/tests/vc4_mock.h b/drivers/gpu/drm/vc4/tests/vc4_mock.h
index 2d0b339bd9f3..002b6218960c 100644
--- a/drivers/gpu/drm/vc4/tests/vc4_mock.h
+++ b/drivers/gpu/drm/vc4/tests/vc4_mock.h
@@ -21,13 +21,8 @@ struct drm_crtc *vc4_find_crtc_for_encoder(struct kunit *test,
return NULL;
}

-struct vc4_dummy_plane {
- struct vc4_plane plane;
-};
-
-struct vc4_dummy_plane *vc4_dummy_plane(struct kunit *test,
- struct drm_device *drm,
- enum drm_plane_type type);
+struct drm_plane *vc4_dummy_plane(struct kunit *test, struct drm_device *drm,
+ enum drm_plane_type type);

struct vc4_dummy_crtc {
struct vc4_crtc crtc;
diff --git a/drivers/gpu/drm/vc4/tests/vc4_mock_plane.c b/drivers/gpu/drm/vc4/tests/vc4_mock_plane.c
index 62b18f5f41db..973f5f929097 100644
--- a/drivers/gpu/drm/vc4/tests/vc4_mock_plane.c
+++ b/drivers/gpu/drm/vc4/tests/vc4_mock_plane.c
@@ -22,15 +22,12 @@ static const uint32_t vc4_dummy_plane_formats[] = {
DRM_FORMAT_XRGB8888,
};

-struct vc4_dummy_plane *vc4_dummy_plane(struct kunit *test,
- struct drm_device *drm,
- enum drm_plane_type type)
+struct drm_plane *vc4_dummy_plane(struct kunit *test, struct drm_device *drm,
+ enum drm_plane_type type)
{
- struct vc4_dummy_plane *dummy_plane;
struct drm_plane *plane;

- dummy_plane = drmm_universal_plane_alloc(drm,
- struct vc4_dummy_plane, plane.base,
+ plane = __drmm_universal_plane_alloc(drm, sizeof(struct drm_plane), 0,
0,
&vc4_dummy_plane_funcs,
vc4_dummy_plane_formats,
@@ -38,10 +35,9 @@ struct vc4_dummy_plane *vc4_dummy_plane(struct kunit *test,
NULL,
DRM_PLANE_TYPE_PRIMARY,
NULL);
- KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dummy_plane);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, plane);

- plane = &dummy_plane->plane.base;
drm_plane_helper_add(plane, &vc4_dummy_plane_helper_funcs);

- return dummy_plane;
+ return plane;
}

--
2.41.0

2023-11-28 10:28:10

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 20/45] drm/vc4: hdmi: Switch to HDMI connector

The new HDMI connector infrastructure allows us to remove a lot of
boilerplate, so let's switch to it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 636 +++++--------------------------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 44 +--
drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 6 +-
3 files changed, 84 insertions(+), 602 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index f05e2c95a60d..1c2258c0e0e7 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -109,25 +109,6 @@

#define HDMI_14_MAX_TMDS_CLK (340 * 1000 * 1000)

-static const char * const output_format_str[] = {
- [VC4_HDMI_OUTPUT_RGB] = "RGB",
- [VC4_HDMI_OUTPUT_YUV420] = "YUV 4:2:0",
- [VC4_HDMI_OUTPUT_YUV422] = "YUV 4:2:2",
- [VC4_HDMI_OUTPUT_YUV444] = "YUV 4:4:4",
-};
-
-static const char *vc4_hdmi_output_fmt_str(enum vc4_hdmi_output_format fmt)
-{
- if (fmt >= ARRAY_SIZE(output_format_str))
- return "invalid";
-
- return output_format_str[fmt];
-}
-
-static unsigned long long
-vc4_hdmi_encoder_compute_mode_clock(const struct drm_display_mode *mode,
- unsigned int bpc, enum vc4_hdmi_output_format fmt);
-
static bool vc4_hdmi_supports_scrambling(struct vc4_hdmi *vc4_hdmi)
{
struct drm_display_info *display = &vc4_hdmi->connector.display_info;
@@ -146,28 +127,13 @@ static bool vc4_hdmi_supports_scrambling(struct vc4_hdmi *vc4_hdmi)

static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode,
unsigned int bpc,
- enum vc4_hdmi_output_format fmt)
+ enum hdmi_colorspace fmt)
{
- unsigned long long clock = vc4_hdmi_encoder_compute_mode_clock(mode, bpc, fmt);
+ unsigned long long clock = drm_connector_hdmi_compute_mode_clock(mode, bpc, fmt);

return clock > HDMI_14_MAX_TMDS_CLK;
}

-static bool vc4_hdmi_is_full_range(struct vc4_hdmi *vc4_hdmi,
- struct vc4_hdmi_connector_state *vc4_state)
-{
- const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
- struct drm_display_info *display = &vc4_hdmi->connector.display_info;
-
- if (vc4_state->broadcast_rgb == VC4_HDMI_BROADCAST_RGB_LIMITED)
- return false;
- else if (vc4_state->broadcast_rgb == VC4_HDMI_BROADCAST_RGB_FULL)
- return true;
-
- return !display->is_hdmi ||
- drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL;
-}
-
static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused)
{
struct drm_debugfs_entry *entry = m->private;
@@ -519,7 +485,7 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
const struct drm_display_mode *mode;

list_for_each_entry(mode, &connector->probed_modes, head) {
- if (vc4_hdmi_mode_needs_scrambling(mode, 8, VC4_HDMI_OUTPUT_RGB)) {
+ if (vc4_hdmi_mode_needs_scrambling(mode, 8, HDMI_COLORSPACE_RGB)) {
drm_warn_once(drm, "The core clock cannot reach frequencies high enough to support 4k @ 60Hz.");
drm_warn_once(drm, "Please change your config.txt file to add hdmi_enable_4kp60.");
}
@@ -534,12 +500,8 @@ static int vc4_hdmi_connector_atomic_check(struct drm_connector *connector,
{
struct drm_connector_state *old_state =
drm_atomic_get_old_connector_state(state, connector);
- struct vc4_hdmi_connector_state *old_vc4_state =
- conn_state_to_vc4_hdmi_conn_state(old_state);
struct drm_connector_state *new_state =
drm_atomic_get_new_connector_state(state, connector);
- struct vc4_hdmi_connector_state *new_vc4_state =
- conn_state_to_vc4_hdmi_conn_state(new_state);
struct drm_crtc *crtc = new_state->crtc;

if (!crtc)
@@ -571,9 +533,7 @@ static int vc4_hdmi_connector_atomic_check(struct drm_connector *connector,
return ret;
}

- if (old_state->colorspace != new_state->colorspace ||
- old_vc4_state->broadcast_rgb != new_vc4_state->broadcast_rgb ||
- !drm_connector_atomic_hdr_metadata_equal(old_state, new_state)) {
+ if (old_state->colorspace != new_state->colorspace) {
struct drm_crtc_state *crtc_state;

crtc_state = drm_atomic_get_crtc_state(state, crtc);
@@ -583,112 +543,21 @@ static int vc4_hdmi_connector_atomic_check(struct drm_connector *connector,
crtc_state->mode_changed = true;
}

- return 0;
-}
-
-static int vc4_hdmi_connector_get_property(struct drm_connector *connector,
- const struct drm_connector_state *state,
- struct drm_property *property,
- uint64_t *val)
-{
- struct drm_device *drm = connector->dev;
- struct vc4_hdmi *vc4_hdmi =
- connector_to_vc4_hdmi(connector);
- const struct vc4_hdmi_connector_state *vc4_conn_state =
- conn_state_to_vc4_hdmi_conn_state(state);
-
- if (property == vc4_hdmi->broadcast_rgb_property) {
- *val = vc4_conn_state->broadcast_rgb;
- } else {
- drm_dbg(drm, "Unknown property [PROP:%d:%s]\n",
- property->base.id, property->name);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int vc4_hdmi_connector_set_property(struct drm_connector *connector,
- struct drm_connector_state *state,
- struct drm_property *property,
- uint64_t val)
-{
- struct drm_device *drm = connector->dev;
- struct vc4_hdmi *vc4_hdmi =
- connector_to_vc4_hdmi(connector);
- struct vc4_hdmi_connector_state *vc4_conn_state =
- conn_state_to_vc4_hdmi_conn_state(state);
-
- if (property == vc4_hdmi->broadcast_rgb_property) {
- vc4_conn_state->broadcast_rgb = val;
- return 0;
- }
-
- drm_dbg(drm, "Unknown property [PROP:%d:%s]\n",
- property->base.id, property->name);
- return -EINVAL;
+ return drm_atomic_helper_connector_hdmi_check(connector, state);
}

static void vc4_hdmi_connector_reset(struct drm_connector *connector)
{
- struct vc4_hdmi_connector_state *old_state =
- conn_state_to_vc4_hdmi_conn_state(connector->state);
- struct vc4_hdmi_connector_state *new_state =
- kzalloc(sizeof(*new_state), GFP_KERNEL);
-
- if (connector->state)
- __drm_atomic_helper_connector_destroy_state(connector->state);
-
- kfree(old_state);
- __drm_atomic_helper_connector_reset(connector, &new_state->base);
-
- if (!new_state)
- return;
-
- new_state->base.max_bpc = 8;
- new_state->base.max_requested_bpc = 8;
- new_state->output_format = VC4_HDMI_OUTPUT_RGB;
- new_state->broadcast_rgb = VC4_HDMI_BROADCAST_RGB_AUTO;
+ drm_atomic_helper_connector_reset(connector);
+ __drm_atomic_helper_connector_hdmi_reset(connector, connector->state);
drm_atomic_helper_connector_tv_margins_reset(connector);
}

-static struct drm_connector_state *
-vc4_hdmi_connector_duplicate_state(struct drm_connector *connector)
-{
- struct drm_connector_state *conn_state = connector->state;
- struct vc4_hdmi_connector_state *vc4_state = conn_state_to_vc4_hdmi_conn_state(conn_state);
- struct vc4_hdmi_connector_state *new_state;
-
- new_state = kzalloc(sizeof(*new_state), GFP_KERNEL);
- if (!new_state)
- return NULL;
-
- new_state->tmds_char_rate = vc4_state->tmds_char_rate;
- new_state->output_bpc = vc4_state->output_bpc;
- new_state->output_format = vc4_state->output_format;
- new_state->broadcast_rgb = vc4_state->broadcast_rgb;
- __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base);
-
- return &new_state->base;
-}
-
-static void vc4_hdmi_connector_destroy_state(struct drm_connector *connector,
- struct drm_connector_state *state)
-{
- struct vc4_hdmi_connector_state *vc4_state =
- conn_state_to_vc4_hdmi_conn_state(state);
-
- __drm_atomic_helper_connector_destroy_state(state);
- kfree(vc4_state);
-}
-
static const struct drm_connector_funcs vc4_hdmi_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.reset = vc4_hdmi_connector_reset,
- .atomic_duplicate_state = vc4_hdmi_connector_duplicate_state,
- .atomic_destroy_state = vc4_hdmi_connector_destroy_state,
- .atomic_get_property = vc4_hdmi_connector_get_property,
- .atomic_set_property = vc4_hdmi_connector_set_property,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};

static const struct drm_connector_helper_funcs vc4_hdmi_connector_helper_funcs = {
@@ -697,32 +566,7 @@ static const struct drm_connector_helper_funcs vc4_hdmi_connector_helper_funcs =
.atomic_check = vc4_hdmi_connector_atomic_check,
};

-static const struct drm_prop_enum_list broadcast_rgb_names[] = {
- { VC4_HDMI_BROADCAST_RGB_AUTO, "Automatic" },
- { VC4_HDMI_BROADCAST_RGB_FULL, "Full" },
- { VC4_HDMI_BROADCAST_RGB_LIMITED, "Limited 16:235" },
-};
-
-static void
-vc4_hdmi_attach_broadcast_rgb_property(struct drm_device *dev,
- struct vc4_hdmi *vc4_hdmi)
-{
- struct drm_property *prop = vc4_hdmi->broadcast_rgb_property;
-
- if (!prop) {
- prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
- "Broadcast RGB",
- broadcast_rgb_names,
- ARRAY_SIZE(broadcast_rgb_names));
- if (!prop)
- return;
-
- vc4_hdmi->broadcast_rgb_property = prop;
- }
-
- drm_object_attach_property(&vc4_hdmi->connector.base, prop,
- VC4_HDMI_BROADCAST_RGB_AUTO);
-}
+static const struct drm_connector_hdmi_funcs vc4_hdmi_hdmi_connector_funcs;

static int vc4_hdmi_connector_init(struct drm_device *dev,
struct vc4_hdmi *vc4_hdmi)
@@ -731,10 +575,16 @@ static int vc4_hdmi_connector_init(struct drm_device *dev,
struct drm_encoder *encoder = &vc4_hdmi->encoder.base;
int ret;

- ret = drmm_connector_init(dev, connector,
- &vc4_hdmi_connector_funcs,
- DRM_MODE_CONNECTOR_HDMIA,
- vc4_hdmi->ddc);
+ ret = drmm_connector_hdmi_init(dev, connector,
+ "Broadcom", "Videocore",
+ &vc4_hdmi_connector_funcs,
+ &vc4_hdmi_hdmi_connector_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ vc4_hdmi->ddc,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
if (ret)
return ret;

@@ -758,7 +608,6 @@ static int vc4_hdmi_connector_init(struct drm_device *dev,

drm_connector_attach_colorspace_property(connector);
drm_connector_attach_tv_margin_properties(connector);
- drm_connector_attach_max_bpc_property(connector, 8, 12);

connector->polled = (DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT);
@@ -767,21 +616,19 @@ static int vc4_hdmi_connector_init(struct drm_device *dev,
connector->doublescan_allowed = 0;
connector->stereo_allowed = 1;

- if (vc4_hdmi->variant->supports_hdr)
- drm_connector_attach_hdr_output_metadata_property(connector);
-
- vc4_hdmi_attach_broadcast_rgb_property(dev, vc4_hdmi);
+ ret = drm_connector_attach_broadcast_rgb_property(connector);
+ if (ret)
+ return ret;

drm_connector_attach_encoder(connector, encoder);

return 0;
}

-static int vc4_hdmi_stop_packet(struct drm_encoder *encoder,
+static int vc4_hdmi_stop_packet(struct vc4_hdmi *vc4_hdmi,
enum hdmi_infoframe_type type,
bool poll)
{
- struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
struct drm_device *drm = vc4_hdmi->connector.dev;
u32 packet_id = type - 0x80;
unsigned long flags;
@@ -805,12 +652,13 @@ static int vc4_hdmi_stop_packet(struct drm_encoder *encoder,
return ret;
}

-static void vc4_hdmi_write_infoframe(struct drm_encoder *encoder,
- union hdmi_infoframe *frame)
+static int vc4_hdmi_write_infoframe(struct drm_connector *connector,
+ enum hdmi_infoframe_type type,
+ const u8 *infoframe, size_t len)
{
- struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct drm_device *drm = vc4_hdmi->connector.dev;
- u32 packet_id = frame->any.type - 0x80;
+ struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
+ struct drm_device *drm = connector->dev;
+ u32 packet_id = type - 0x80;
const struct vc4_hdmi_register *ram_packet_start =
&vc4_hdmi->variant->registers[HDMI_RAM_PACKET_START];
u32 packet_reg = ram_packet_start->offset + VC4_HDMI_PACKET_STRIDE * packet_id;
@@ -820,22 +668,23 @@ static void vc4_hdmi_write_infoframe(struct drm_encoder *encoder,
ram_packet_start->reg);
uint8_t buffer[VC4_HDMI_PACKET_STRIDE] = {};
unsigned long flags;
- ssize_t len, i;
+ ssize_t i;
int ret;
int idx;

if (!drm_dev_enter(drm, &idx))
- return;
+ return 0;
+
+ if (len > sizeof(buffer))
+ goto out;
+
+ memcpy(buffer, infoframe, len);

WARN_ONCE(!(HDMI_READ(HDMI_RAM_PACKET_CONFIG) &
VC4_HDMI_RAM_PACKET_ENABLE),
"Packet RAM has to be on to store the packet.");

- len = hdmi_infoframe_pack(frame, buffer, sizeof(buffer));
- if (len < 0)
- goto out;
-
- ret = vc4_hdmi_stop_packet(encoder, frame->any.type, true);
+ ret = vc4_hdmi_stop_packet(vc4_hdmi, type, true);
if (ret) {
DRM_ERROR("Failed to wait for infoframe to go idle: %d\n", ret);
goto out;
@@ -877,130 +726,7 @@ static void vc4_hdmi_write_infoframe(struct drm_encoder *encoder,

out:
drm_dev_exit(idx);
-}
-
-static void vc4_hdmi_avi_infoframe_colorspace(struct hdmi_avi_infoframe *frame,
- enum vc4_hdmi_output_format fmt)
-{
- switch (fmt) {
- case VC4_HDMI_OUTPUT_RGB:
- frame->colorspace = HDMI_COLORSPACE_RGB;
- break;
-
- case VC4_HDMI_OUTPUT_YUV420:
- frame->colorspace = HDMI_COLORSPACE_YUV420;
- break;
-
- case VC4_HDMI_OUTPUT_YUV422:
- frame->colorspace = HDMI_COLORSPACE_YUV422;
- break;
-
- case VC4_HDMI_OUTPUT_YUV444:
- frame->colorspace = HDMI_COLORSPACE_YUV444;
- break;
-
- default:
- break;
- }
-}
-
-static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
-{
- struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct drm_connector *connector = &vc4_hdmi->connector;
- struct drm_connector_state *cstate = connector->state;
- struct vc4_hdmi_connector_state *vc4_state =
- conn_state_to_vc4_hdmi_conn_state(cstate);
- const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
- union hdmi_infoframe frame;
- int ret;
-
- lockdep_assert_held(&vc4_hdmi->mutex);
-
- ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
- connector, mode);
- if (ret < 0) {
- DRM_ERROR("couldn't fill AVI infoframe\n");
- return;
- }
-
- drm_hdmi_avi_infoframe_quant_range(&frame.avi,
- connector, mode,
- vc4_hdmi_is_full_range(vc4_hdmi, vc4_state) ?
- HDMI_QUANTIZATION_RANGE_FULL :
- HDMI_QUANTIZATION_RANGE_LIMITED);
- drm_hdmi_avi_infoframe_colorimetry(&frame.avi, cstate);
- vc4_hdmi_avi_infoframe_colorspace(&frame.avi, vc4_state->output_format);
- drm_hdmi_avi_infoframe_bars(&frame.avi, cstate);
-
- vc4_hdmi_write_infoframe(encoder, &frame);
-}
-
-static void vc4_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
-{
- union hdmi_infoframe frame;
- int ret;
-
- ret = hdmi_spd_infoframe_init(&frame.spd, "Broadcom", "Videocore");
- if (ret < 0) {
- DRM_ERROR("couldn't fill SPD infoframe\n");
- return;
- }
-
- frame.spd.sdi = HDMI_SPD_SDI_PC;
-
- vc4_hdmi_write_infoframe(encoder, &frame);
-}
-
-static void vc4_hdmi_set_audio_infoframe(struct drm_encoder *encoder)
-{
- struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct hdmi_audio_infoframe *audio = &vc4_hdmi->audio.infoframe;
- union hdmi_infoframe frame;
-
- memcpy(&frame.audio, audio, sizeof(*audio));
-
- if (vc4_hdmi->packet_ram_enabled)
- vc4_hdmi_write_infoframe(encoder, &frame);
-}
-
-static void vc4_hdmi_set_hdr_infoframe(struct drm_encoder *encoder)
-{
- struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct drm_connector *connector = &vc4_hdmi->connector;
- struct drm_connector_state *conn_state = connector->state;
- union hdmi_infoframe frame;
-
- lockdep_assert_held(&vc4_hdmi->mutex);
-
- if (!vc4_hdmi->variant->supports_hdr)
- return;
-
- if (!conn_state->hdr_output_metadata)
- return;
-
- if (drm_hdmi_infoframe_set_hdr_metadata(&frame.drm, conn_state))
- return;
-
- vc4_hdmi_write_infoframe(encoder, &frame);
-}
-
-static void vc4_hdmi_set_infoframes(struct drm_encoder *encoder)
-{
- struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-
- lockdep_assert_held(&vc4_hdmi->mutex);
-
- vc4_hdmi_set_avi_infoframe(encoder);
- vc4_hdmi_set_spd_infoframe(encoder);
- /*
- * If audio was streaming, then we need to reenabled the audio
- * infoframe here during encoder_enable.
- */
- if (vc4_hdmi->audio.streaming)
- vc4_hdmi_set_audio_infoframe(encoder);
-
- vc4_hdmi_set_hdr_infoframe(encoder);
+ return ret;
}

#define SCRAMBLING_POLLING_DELAY_MS 1000
@@ -1169,9 +895,8 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
struct drm_connector_state *state,
const struct drm_display_mode *mode)
{
- struct vc4_hdmi_connector_state *vc4_state =
- conn_state_to_vc4_hdmi_conn_state(state);
struct drm_device *drm = vc4_hdmi->connector.dev;
+ bool is_lim_range = !state->hdmi.is_full_range;
unsigned long flags;
u32 csc_ctl;
int idx;
@@ -1184,7 +909,7 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
VC4_HD_CSC_CTL_ORDER);

- if (!vc4_hdmi_is_full_range(vc4_hdmi, vc4_state)) {
+ if (is_lim_range) {
/* CEA VICs other than #1 requre limited range RGB
* output unless overridden by an AVI infoframe.
* Apply a colorspace conversion to squash 0-255 down
@@ -1407,9 +1132,7 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
const struct drm_display_mode *mode)
{
struct drm_device *drm = vc4_hdmi->connector.dev;
- struct vc4_hdmi_connector_state *vc4_state =
- conn_state_to_vc4_hdmi_conn_state(state);
- unsigned int lim_range = vc4_hdmi_is_full_range(vc4_hdmi, vc4_state) ? 0 : 1;
+ unsigned int lim_range = state->hdmi.is_full_range ? 0 : 1;
unsigned long flags;
const u16 (*csc)[4];
u32 if_cfg = 0;
@@ -1424,14 +1147,14 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,

spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);

- switch (vc4_state->output_format) {
- case VC4_HDMI_OUTPUT_YUV444:
+ switch (state->hdmi.output_format) {
+ case HDMI_COLORSPACE_YUV444:
csc = vc5_hdmi_find_yuv_csc_coeffs(vc4_hdmi, state->colorspace, !!lim_range);

vc5_hdmi_set_csc_coeffs_swap(vc4_hdmi, csc);
break;

- case VC4_HDMI_OUTPUT_YUV422:
+ case HDMI_COLORSPACE_YUV422:
csc = vc5_hdmi_find_yuv_csc_coeffs(vc4_hdmi, state->colorspace, !!lim_range);

csc_ctl |= VC4_SET_FIELD(VC5_MT_CP_CSC_CTL_FILTER_MODE_444_TO_422_STANDARD,
@@ -1448,7 +1171,7 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
vc5_hdmi_set_csc_coeffs(vc4_hdmi, csc);
break;

- case VC4_HDMI_OUTPUT_RGB:
+ case HDMI_COLORSPACE_RGB:
if_xbar = 0x354021;

vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_rgb[lim_range]);
@@ -1537,8 +1260,6 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
const struct drm_display_mode *mode)
{
struct drm_device *drm = vc4_hdmi->connector.dev;
- const struct vc4_hdmi_connector_state *vc4_state =
- conn_state_to_vc4_hdmi_conn_state(state);
bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
bool vsync_pos = mode->flags & DRM_MODE_FLAG_PVSYNC;
bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
@@ -1590,7 +1311,7 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
HDMI_WRITE(HDMI_VERTB0, vertb_even);
HDMI_WRITE(HDMI_VERTB1, vertb);

- switch (vc4_state->output_bpc) {
+ switch (state->hdmi.output_bpc) {
case 12:
gcp = 6;
break;
@@ -1607,7 +1328,7 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
* YCC422 is always 36-bit and not considered deep colour so
* doesn't signal in GCP.
*/
- if (vc4_state->output_format == VC4_HDMI_OUTPUT_YUV422) {
+ if (state->hdmi.output_format == HDMI_COLORSPACE_YUV422) {
gcp = 0;
}

@@ -1691,10 +1412,8 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
struct drm_connector *connector = &vc4_hdmi->connector;
struct drm_connector_state *conn_state =
drm_atomic_get_new_connector_state(state, connector);
- struct vc4_hdmi_connector_state *vc4_conn_state =
- conn_state_to_vc4_hdmi_conn_state(conn_state);
const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
- unsigned long tmds_char_rate = vc4_conn_state->tmds_char_rate;
+ unsigned long tmds_char_rate = conn_state->hdmi.tmds_char_rate;
unsigned long bvb_rate, hsm_rate;
unsigned long flags;
int ret;
@@ -1771,7 +1490,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
}

if (vc4_hdmi->variant->phy_init)
- vc4_hdmi->variant->phy_init(vc4_hdmi, vc4_conn_state);
+ vc4_hdmi->variant->phy_init(vc4_hdmi, conn_state);

spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);

@@ -1836,7 +1555,8 @@ static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder,
struct drm_atomic_state *state)
{
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct drm_device *drm = vc4_hdmi->connector.dev;
+ struct drm_connector *connector = &vc4_hdmi->connector;
+ struct drm_device *drm = connector->dev;
const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
struct drm_display_info *display = &vc4_hdmi->connector.display_info;
bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
@@ -1902,7 +1622,7 @@ static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder,
spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
vc4_hdmi->packet_ram_enabled = true;

- vc4_hdmi_set_infoframes(encoder);
+ drm_atomic_helper_connector_hdmi_update_infoframes(connector, state);
}

vc4_hdmi_recenter_fifo(vc4_hdmi);
@@ -1919,108 +1639,21 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
struct drm_connector_state *conn_state)
{
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct vc4_hdmi_connector_state *vc4_state =
- conn_state_to_vc4_hdmi_conn_state(conn_state);

mutex_lock(&vc4_hdmi->mutex);
drm_mode_copy(&vc4_hdmi->saved_adjusted_mode,
&crtc_state->adjusted_mode);
- vc4_hdmi->output_bpc = vc4_state->output_bpc;
- vc4_hdmi->output_format = vc4_state->output_format;
+ vc4_hdmi->output_bpc = conn_state->hdmi.output_bpc;
+ vc4_hdmi->output_format = conn_state->hdmi.output_format;
mutex_unlock(&vc4_hdmi->mutex);
}

-static bool
-vc4_hdmi_sink_supports_format_bpc(const struct vc4_hdmi *vc4_hdmi,
- const struct drm_display_info *info,
- const struct drm_display_mode *mode,
- unsigned int format, unsigned int bpc)
-{
- struct drm_device *dev = vc4_hdmi->connector.dev;
- u8 vic = drm_match_cea_mode(mode);
-
- if (vic == 1 && bpc != 8) {
- drm_dbg(dev, "VIC1 requires a bpc of 8, got %u\n", bpc);
- return false;
- }
-
- if (!info->is_hdmi &&
- (format != VC4_HDMI_OUTPUT_RGB || bpc != 8)) {
- drm_dbg(dev, "DVI Monitors require an RGB output at 8 bpc\n");
- return false;
- }
-
- switch (format) {
- case VC4_HDMI_OUTPUT_RGB:
- drm_dbg(dev, "RGB Format, checking the constraints.\n");
-
- if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444))
- return false;
-
- if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) {
- drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
- return false;
- }
-
- if (bpc == 12 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36)) {
- drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
- return false;
- }
-
- drm_dbg(dev, "RGB format supported in that configuration.\n");
-
- return true;
-
- case VC4_HDMI_OUTPUT_YUV422:
- drm_dbg(dev, "YUV422 format, checking the constraints.\n");
-
- if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) {
- drm_dbg(dev, "Sink doesn't support YUV422.\n");
- return false;
- }
-
- if (bpc != 12) {
- drm_dbg(dev, "YUV422 only supports 12 bpc.\n");
- return false;
- }
-
- drm_dbg(dev, "YUV422 format supported in that configuration.\n");
-
- return true;
-
- case VC4_HDMI_OUTPUT_YUV444:
- drm_dbg(dev, "YUV444 format, checking the constraints.\n");
-
- if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR444)) {
- drm_dbg(dev, "Sink doesn't support YUV444.\n");
- return false;
- }
-
- if (bpc == 10 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_30)) {
- drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
- return false;
- }
-
- if (bpc == 12 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_36)) {
- drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
- return false;
- }
-
- drm_dbg(dev, "YUV444 format supported in that configuration.\n");
-
- return true;
- }
-
- return false;
-}
-
static enum drm_mode_status
-vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
- const struct drm_display_mode *mode,
- unsigned long long clock)
+vc4_hdmi_connector_clock_valid(const struct drm_connector *connector,
+ const struct drm_display_mode *mode,
+ unsigned long long clock)
{
- const struct drm_connector *connector = &vc4_hdmi->connector;
- const struct drm_display_info *info = &connector->display_info;
+ const struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
struct vc4_dev *vc4 = to_vc4_dev(connector->dev);

if (clock > vc4_hdmi->variant->max_pixel_clock)
@@ -2035,125 +1668,13 @@ vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
drm_mode_vrefresh(mode) >= 50)
return MODE_CLOCK_HIGH;

- if (info->max_tmds_clock && clock > (info->max_tmds_clock * 1000))
- return MODE_CLOCK_HIGH;
-
return MODE_OK;
}

-static unsigned long long
-vc4_hdmi_encoder_compute_mode_clock(const struct drm_display_mode *mode,
- unsigned int bpc,
- enum vc4_hdmi_output_format fmt)
-{
- unsigned long long clock = mode->clock * 1000ULL;
-
- if (mode->flags & DRM_MODE_FLAG_DBLCLK)
- clock = clock * 2;
-
- if (fmt == VC4_HDMI_OUTPUT_YUV422)
- bpc = 8;
-
- clock = clock * bpc;
- do_div(clock, 8);
-
- return clock;
-}
-
-static int
-vc4_hdmi_encoder_compute_clock(const struct vc4_hdmi *vc4_hdmi,
- struct vc4_hdmi_connector_state *vc4_state,
- const struct drm_display_mode *mode,
- unsigned int bpc, unsigned int fmt)
-{
- unsigned long long clock;
-
- clock = vc4_hdmi_encoder_compute_mode_clock(mode, bpc, fmt);
- if (vc4_hdmi_encoder_clock_valid(vc4_hdmi, mode, clock) != MODE_OK)
- return -EINVAL;
-
- vc4_state->tmds_char_rate = clock;
-
- return 0;
-}
-
-static int
-vc4_hdmi_encoder_compute_format(const struct vc4_hdmi *vc4_hdmi,
- struct vc4_hdmi_connector_state *vc4_state,
- const struct drm_display_mode *mode,
- unsigned int bpc)
-{
- struct drm_device *dev = vc4_hdmi->connector.dev;
- const struct drm_connector *connector = &vc4_hdmi->connector;
- const struct drm_display_info *info = &connector->display_info;
- unsigned int format;
-
- drm_dbg(dev, "Trying with an RGB output\n");
-
- format = VC4_HDMI_OUTPUT_RGB;
- if (vc4_hdmi_sink_supports_format_bpc(vc4_hdmi, info, mode, format, bpc)) {
- int ret;
-
- ret = vc4_hdmi_encoder_compute_clock(vc4_hdmi, vc4_state,
- mode, bpc, format);
- if (!ret) {
- vc4_state->output_format = format;
- return 0;
- }
- }
-
- drm_dbg(dev, "Failed, Trying with an YUV422 output\n");
-
- format = VC4_HDMI_OUTPUT_YUV422;
- if (vc4_hdmi_sink_supports_format_bpc(vc4_hdmi, info, mode, format, bpc)) {
- int ret;
-
- ret = vc4_hdmi_encoder_compute_clock(vc4_hdmi, vc4_state,
- mode, bpc, format);
- if (!ret) {
- vc4_state->output_format = format;
- return 0;
- }
- }
-
- drm_dbg(dev, "Failed. No Format Supported for that bpc count.\n");
-
- return -EINVAL;
-}
-
-static int
-vc4_hdmi_encoder_compute_config(const struct vc4_hdmi *vc4_hdmi,
- struct vc4_hdmi_connector_state *vc4_state,
- const struct drm_display_mode *mode)
-{
- struct drm_device *dev = vc4_hdmi->connector.dev;
- struct drm_connector_state *conn_state = &vc4_state->base;
- unsigned int max_bpc = clamp_t(unsigned int, conn_state->max_bpc, 8, 12);
- unsigned int bpc;
- int ret;
-
- for (bpc = max_bpc; bpc >= 8; bpc -= 2) {
- drm_dbg(dev, "Trying with a %d bpc output\n", bpc);
-
- ret = vc4_hdmi_encoder_compute_format(vc4_hdmi, vc4_state,
- mode, bpc);
- if (ret)
- continue;
-
- vc4_state->output_bpc = bpc;
-
- drm_dbg(dev,
- "Mode %ux%u @ %uHz: Found configuration: bpc: %u, fmt: %s, clock: %llu\n",
- mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode),
- vc4_state->output_bpc,
- vc4_hdmi_output_fmt_str(vc4_state->output_format),
- vc4_state->tmds_char_rate);
-
- break;
- }
-
- return ret;
-}
+static const struct drm_connector_hdmi_funcs vc4_hdmi_hdmi_connector_funcs = {
+ .tmds_char_rate_valid = vc4_hdmi_connector_clock_valid,
+ .write_infoframe = vc4_hdmi_write_infoframe,
+};

#define WIFI_2_4GHz_CH1_MIN_FREQ 2400000000ULL
#define WIFI_2_4GHz_CH1_MAX_FREQ 2422000000ULL
@@ -2163,16 +1684,9 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_connector_state *conn_state)
{
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct drm_connector *connector = &vc4_hdmi->connector;
- struct drm_connector_state *old_conn_state =
- drm_atomic_get_old_connector_state(conn_state->state, connector);
- struct vc4_hdmi_connector_state *old_vc4_state =
- conn_state_to_vc4_hdmi_conn_state(old_conn_state);
- struct vc4_hdmi_connector_state *vc4_state = conn_state_to_vc4_hdmi_conn_state(conn_state);
struct drm_display_mode *mode = &crtc_state->adjusted_mode;
unsigned long long tmds_char_rate = mode->clock * 1000;
unsigned long long tmds_bit_rate;
- int ret;

if (vc4_hdmi->variant->unsupported_odd_h_timings) {
if (mode->flags & DRM_MODE_FLAG_DBLCLK) {
@@ -2208,15 +1722,6 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
tmds_char_rate = mode->clock * 1000;
}

- ret = vc4_hdmi_encoder_compute_config(vc4_hdmi, vc4_state, mode);
- if (ret)
- return ret;
-
- /* vc4_hdmi_encoder_compute_config may have changed output_bpc and/or output_format */
- if (vc4_state->output_bpc != old_vc4_state->output_bpc ||
- vc4_state->output_format != old_vc4_state->output_format)
- crtc_state->mode_changed = true;
-
return 0;
}

@@ -2225,6 +1730,7 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder,
const struct drm_display_mode *mode)
{
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+ unsigned long long rate;

if (vc4_hdmi->variant->unsupported_odd_h_timings &&
!(mode->flags & DRM_MODE_FLAG_DBLCLK) &&
@@ -2232,7 +1738,8 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder,
(mode->hsync_end % 2) || (mode->htotal % 2)))
return MODE_H_ILLEGAL;

- return vc4_hdmi_encoder_clock_valid(vc4_hdmi, mode, mode->clock * 1000);
+ rate = drm_connector_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB);
+ return vc4_hdmi_connector_clock_valid(&vc4_hdmi->connector, mode, rate);
}

static const struct drm_encoder_helper_funcs vc4_hdmi_encoder_helper_funcs = {
@@ -2424,7 +1931,6 @@ static int vc4_hdmi_audio_startup(struct device *dev, void *data)

static void vc4_hdmi_audio_reset(struct vc4_hdmi *vc4_hdmi)
{
- struct drm_encoder *encoder = &vc4_hdmi->encoder.base;
struct device *dev = &vc4_hdmi->pdev->dev;
unsigned long flags;
int ret;
@@ -2432,7 +1938,7 @@ static void vc4_hdmi_audio_reset(struct vc4_hdmi *vc4_hdmi)
lockdep_assert_held(&vc4_hdmi->mutex);

vc4_hdmi->audio.streaming = false;
- ret = vc4_hdmi_stop_packet(encoder, HDMI_INFOFRAME_TYPE_AUDIO, false);
+ ret = vc4_hdmi_stop_packet(vc4_hdmi, HDMI_INFOFRAME_TYPE_AUDIO, false);
if (ret)
dev_err(dev, "Failed to stop audio infoframe: %d\n", ret);

@@ -2523,7 +2029,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
{
struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
struct drm_device *drm = vc4_hdmi->connector.dev;
- struct drm_encoder *encoder = &vc4_hdmi->encoder.base;
+ struct drm_connector *connector = &vc4_hdmi->connector;
unsigned int sample_rate = params->sample_rate;
unsigned int channels = params->channels;
unsigned long flags;
@@ -2600,8 +2106,10 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,

spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);

- memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
- vc4_hdmi_set_audio_infoframe(encoder);
+ ret = drm_atomic_helper_connector_hdmi_update_audio_infoframe(connector,
+ &params->cea);
+ if (ret)
+ goto out_dev_exit;

out_dev_exit:
drm_dev_exit(idx);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 934d5d61485a..b37f1d2c3fe5 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -10,7 +10,6 @@

struct vc4_hdmi;
struct vc4_hdmi_register;
-struct vc4_hdmi_connector_state;

enum vc4_hdmi_phy_channel {
PHY_LANE_0 = 0,
@@ -76,7 +75,7 @@ struct vc4_hdmi_variant {

/* Callback to initialize the PHY according to the connector state */
void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
- struct vc4_hdmi_connector_state *vc4_conn_state);
+ struct drm_connector_state *conn_state);

/* Callback to disable the PHY */
void (*phy_disable)(struct vc4_hdmi *vc4_hdmi);
@@ -110,19 +109,6 @@ struct vc4_hdmi_audio {
bool streaming;
};

-enum vc4_hdmi_output_format {
- VC4_HDMI_OUTPUT_RGB,
- VC4_HDMI_OUTPUT_YUV422,
- VC4_HDMI_OUTPUT_YUV444,
- VC4_HDMI_OUTPUT_YUV420,
-};
-
-enum vc4_hdmi_broadcast_rgb {
- VC4_HDMI_BROADCAST_RGB_AUTO,
- VC4_HDMI_BROADCAST_RGB_FULL,
- VC4_HDMI_BROADCAST_RGB_LIMITED,
-};
-
/* General HDMI hardware state. */
struct vc4_hdmi {
struct vc4_hdmi_audio audio;
@@ -135,8 +121,6 @@ struct vc4_hdmi {

struct delayed_work scrambling_work;

- struct drm_property *broadcast_rgb_property;
-
struct i2c_adapter *ddc;
void __iomem *hdmicore_regs;
void __iomem *hd_regs;
@@ -218,16 +202,17 @@ struct vc4_hdmi {
bool scdc_enabled;

/**
- * @output_bpc: Copy of @vc4_connector_state.output_bpc for use
- * outside of KMS hooks. Protected by @mutex.
+ * @output_bpc: Copy of @drm_connector_state.hdmi.output_bpc for
+ * use outside of KMS hooks. Protected by @mutex.
*/
unsigned int output_bpc;

/**
- * @output_format: Copy of @vc4_connector_state.output_format
- * for use outside of KMS hooks. Protected by @mutex.
+ * @output_format: Copy of
+ * @drm_connector_state.hdmi.output_format for use outside of
+ * KMS hooks. Protected by @mutex.
*/
- enum vc4_hdmi_output_format output_format;
+ enum hdmi_colorspace output_format;
};

#define connector_to_vc4_hdmi(_connector) \
@@ -240,25 +225,14 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
return container_of_const(_encoder, struct vc4_hdmi, encoder);
}

-struct vc4_hdmi_connector_state {
- struct drm_connector_state base;
- unsigned long long tmds_char_rate;
- unsigned int output_bpc;
- enum vc4_hdmi_output_format output_format;
- enum vc4_hdmi_broadcast_rgb broadcast_rgb;
-};
-
-#define conn_state_to_vc4_hdmi_conn_state(_state) \
- container_of_const(_state, struct vc4_hdmi_connector_state, base)
-
void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
- struct vc4_hdmi_connector_state *vc4_conn_state);
+ struct drm_connector_state *conn_state);
void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
void vc4_hdmi_phy_rng_enable(struct vc4_hdmi *vc4_hdmi);
void vc4_hdmi_phy_rng_disable(struct vc4_hdmi *vc4_hdmi);

void vc5_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
- struct vc4_hdmi_connector_state *vc4_conn_state);
+ struct drm_connector_state *conn_state);
void vc5_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
void vc5_hdmi_phy_rng_enable(struct vc4_hdmi *vc4_hdmi);
void vc5_hdmi_phy_rng_disable(struct vc4_hdmi *vc4_hdmi);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_phy.c b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
index ec24999bf96d..1f5507fc7a03 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
@@ -128,7 +128,7 @@
#define OSCILLATOR_FREQUENCY 54000000

void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
- struct vc4_hdmi_connector_state *conn_state)
+ struct drm_connector_state *conn_state)
{
unsigned long flags;

@@ -361,11 +361,11 @@ static void vc5_hdmi_reset_phy(struct vc4_hdmi *vc4_hdmi)
}

void vc5_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
- struct vc4_hdmi_connector_state *conn_state)
+ struct drm_connector_state *conn_state)
{
const struct phy_lane_settings *chan0_settings, *chan1_settings, *chan2_settings, *clock_settings;
const struct vc4_hdmi_variant *variant = vc4_hdmi->variant;
- unsigned long long pixel_freq = conn_state->tmds_char_rate;
+ unsigned long long pixel_freq = conn_state->hdmi.tmds_char_rate;
unsigned long long vco_freq;
unsigned char word_sel;
unsigned long flags;

--
2.41.0

2023-11-28 10:28:12

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 23/45] drm/rockchip: inno_hdmi: Remove useless mode_fixup

The mode_fixup implementation doesn't do anything, so we can simply
remove it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 8 --------
1 file changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 6e5b922a121e..cc48cbf85f31 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -517,13 +517,6 @@ static void inno_hdmi_encoder_disable(struct drm_encoder *encoder)
inno_hdmi_set_pwr_mode(hdmi, LOWER_PWR);
}

-static bool inno_hdmi_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adj_mode)
-{
- return true;
-}
-
static int
inno_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
@@ -540,7 +533,6 @@ inno_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
static struct drm_encoder_helper_funcs inno_hdmi_encoder_helper_funcs = {
.enable = inno_hdmi_encoder_enable,
.disable = inno_hdmi_encoder_disable,
- .mode_fixup = inno_hdmi_encoder_mode_fixup,
.mode_set = inno_hdmi_encoder_mode_set,
.atomic_check = inno_hdmi_encoder_atomic_check,
};

--
2.41.0

2023-11-28 10:28:23

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 16/45] drm/connector: hdmi: Compute bpc and format automatically

Now that we have all the infrastructure needed, we can add some code
that will, for a given connector state and mode, compute the best output
format and bpc.

The algorithm is the same one than the one already found in i915 and
vc4.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_atomic_state_helper.c | 183 ++++++-
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 529 ++++++++++++++++++++-
drivers/gpu/drm/tests/drm_kunit_edid.h | 160 +++++++
3 files changed, 860 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index af3ece136040..4b21422b0e3f 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -668,6 +668,96 @@ static bool hdmi_is_full_range(const struct drm_connector *connector,
return drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL ? true : false;
}

+static bool
+sink_supports_format_bpc(const struct drm_connector *connector,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode,
+ unsigned int format, unsigned int bpc)
+{
+ struct drm_device *dev = connector->dev;
+ u8 vic = drm_match_cea_mode(mode);
+
+ if (vic == 1 && bpc != 8) {
+ drm_dbg(dev, "VIC1 requires a bpc of 8, got %u\n", bpc);
+ return false;
+ }
+
+ if (!info->is_hdmi &&
+ (format != HDMI_COLORSPACE_RGB || bpc != 8)) {
+ drm_dbg(dev, "DVI Monitors require an RGB output at 8 bpc\n");
+ return false;
+ }
+
+ if (!(connector->hdmi.supported_formats & BIT(format))) {
+ drm_dbg(dev, "%s format unsupported by the connector.\n",
+ drm_hdmi_connector_get_output_format_name(format));
+ return false;
+ }
+
+ switch (format) {
+ case HDMI_COLORSPACE_RGB:
+ drm_dbg(dev, "RGB Format, checking the constraints.\n");
+
+ if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444))
+ return false;
+
+ if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) {
+ drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
+ return false;
+ }
+
+ if (bpc == 12 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36)) {
+ drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
+ return false;
+ }
+
+ drm_dbg(dev, "RGB format supported in that configuration.\n");
+
+ return true;
+
+ case HDMI_COLORSPACE_YUV422:
+ drm_dbg(dev, "YUV422 format, checking the constraints.\n");
+
+ if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) {
+ drm_dbg(dev, "Sink doesn't support YUV422.\n");
+ return false;
+ }
+
+ if (bpc != 12) {
+ drm_dbg(dev, "YUV422 only supports 12 bpc.\n");
+ return false;
+ }
+
+ drm_dbg(dev, "YUV422 format supported in that configuration.\n");
+
+ return true;
+
+ case HDMI_COLORSPACE_YUV444:
+ drm_dbg(dev, "YUV444 format, checking the constraints.\n");
+
+ if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR444)) {
+ drm_dbg(dev, "Sink doesn't support YUV444.\n");
+ return false;
+ }
+
+ if (bpc == 10 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_30)) {
+ drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
+ return false;
+ }
+
+ if (bpc == 12 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_36)) {
+ drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
+ return false;
+ }
+
+ drm_dbg(dev, "YUV444 format supported in that configuration.\n");
+
+ return true;
+ }
+
+ return false;
+}
+
static enum drm_mode_status
hdmi_clock_valid(const struct drm_connector *connector,
const struct drm_display_mode *mode,
@@ -712,6 +802,95 @@ hdmi_compute_clock(const struct drm_connector *connector,
return 0;
}

+static bool
+hdmi_try_format_bpc(const struct drm_connector *connector,
+ struct drm_connector_state *state,
+ const struct drm_display_mode *mode,
+ unsigned int bpc, enum hdmi_colorspace fmt)
+{
+ const struct drm_display_info *info = &connector->display_info;
+ struct drm_device *dev = connector->dev;
+ int ret;
+
+ drm_dbg(dev, "Trying %s output format\n",
+ drm_hdmi_connector_get_output_format_name(fmt));
+
+ if (!sink_supports_format_bpc(connector, info, mode, fmt, bpc)) {
+ drm_dbg(dev, "%s output format not supported with %u bpc\n",
+ drm_hdmi_connector_get_output_format_name(fmt), bpc);
+ return false;
+ }
+
+ ret = hdmi_compute_clock(connector, state, mode, bpc, fmt);
+ if (ret) {
+ drm_dbg(dev, "Couldn't compute clock for %s output format and %u bpc\n",
+ drm_hdmi_connector_get_output_format_name(fmt), bpc);
+ return false;
+ }
+
+ drm_dbg(dev, "%s output format supported with %u (TMDS char rate: %llu Hz)\n",
+ drm_hdmi_connector_get_output_format_name(fmt), bpc, state->hdmi.tmds_char_rate);
+
+ return true;
+}
+
+static int
+hdmi_compute_format(const struct drm_connector *connector,
+ struct drm_connector_state *state,
+ const struct drm_display_mode *mode,
+ unsigned int bpc)
+{
+ struct drm_device *dev = connector->dev;
+
+ if (hdmi_try_format_bpc(connector, state, mode, bpc, HDMI_COLORSPACE_RGB)) {
+ state->hdmi.output_format = HDMI_COLORSPACE_RGB;
+ return 0;
+ }
+
+ if (hdmi_try_format_bpc(connector, state, mode, bpc, HDMI_COLORSPACE_YUV422)) {
+ state->hdmi.output_format = HDMI_COLORSPACE_YUV422;
+ return 0;
+ }
+
+ drm_dbg(dev, "Failed. No Format Supported for that bpc count.\n");
+
+ return -EINVAL;
+}
+
+static int
+hdmi_compute_config(const struct drm_connector *connector,
+ struct drm_connector_state *state,
+ const struct drm_display_mode *mode)
+{
+ struct drm_device *dev = connector->dev;
+ unsigned int max_bpc = clamp_t(unsigned int,
+ state->max_bpc,
+ 8, connector->max_bpc);
+ unsigned int bpc;
+ int ret;
+
+ for (bpc = max_bpc; bpc >= 8; bpc -= 2) {
+ drm_dbg(dev, "Trying with a %d bpc output\n", bpc);
+
+ ret = hdmi_compute_format(connector, state, mode, bpc);
+ if (ret)
+ continue;
+
+ state->hdmi.output_bpc = bpc;
+
+ drm_dbg(dev,
+ "Mode %ux%u @ %uHz: Found configuration: bpc: %u, fmt: %s, clock: %llu\n",
+ mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode),
+ state->hdmi.output_bpc,
+ drm_hdmi_connector_get_output_format_name(state->hdmi.output_format),
+ state->hdmi.tmds_char_rate);
+
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
/**
* drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
* @connector: DRM Connector
@@ -737,9 +916,7 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,

new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);

- ret = hdmi_compute_clock(connector, new_state, mode,
- new_state->hdmi.output_bpc,
- new_state->hdmi.output_format);
+ ret = hdmi_compute_config(connector, new_state, mode);
if (ret)
return ret;

diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
index e7dbdd4a4e7f..860e34b00fee 100644
--- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
@@ -70,9 +70,6 @@ static int light_up_connector(struct kunit *test,
conn_state = drm_atomic_get_connector_state(state, connector);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);

- conn_state->hdmi.output_bpc = connector->max_bpc;
- conn_state->hdmi.output_format = HDMI_COLORSPACE_RGB;
-
ret = drm_atomic_set_crtc_for_connector(conn_state, crtc);
KUNIT_EXPECT_EQ(test, ret, 0);

@@ -720,10 +717,15 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test)
10);
KUNIT_ASSERT_NOT_NULL(test, priv);

+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
ctx = drm_kunit_helper_acquire_ctx_alloc(test);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);

- conn = &priv->connector;
preferred = find_preferred_mode(conn);
KUNIT_ASSERT_NOT_NULL(test, preferred);

@@ -741,11 +743,11 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test)
old_conn_state = drm_atomic_get_old_connector_state(state, conn);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);

- new_conn_state->hdmi.output_bpc = 8;
+ new_conn_state->max_requested_bpc = 8;

KUNIT_ASSERT_NE(test,
- old_conn_state->hdmi.output_bpc,
- new_conn_state->hdmi.output_bpc);
+ old_conn_state->max_requested_bpc,
+ new_conn_state->max_requested_bpc);

ret = drm_atomic_check_only(state);
KUNIT_ASSERT_EQ(test, ret, 0);
@@ -789,10 +791,15 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
10);
KUNIT_ASSERT_NOT_NULL(test, priv);

+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
ctx = drm_kunit_helper_acquire_ctx_alloc(test);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);

- conn = &priv->connector;
preferred = find_preferred_mode(conn);
KUNIT_ASSERT_NOT_NULL(test, preferred);

@@ -832,6 +839,56 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
}

+/*
+ * Test that if we have an HDMI connector but a !HDMI display, we always
+ * output RGB with 8 bpc.
+ */
+static void drm_test_check_output_bpc_dvi(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_dvi_1080p,
+ ARRAY_SIZE(test_edid_dvi_1080p));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_FALSE(test, info->is_hdmi);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
/*
* Test that when doing a commit which would use RGB 8bpc, the TMDS
* clock rate stored in the connector state is equal to the mode clock
@@ -1024,6 +1081,452 @@ static void drm_test_check_hdmi_funcs_reject_rate(struct kunit *test)
KUNIT_EXPECT_LT(test, ret, 0);
}

+/*
+ * Test that if:
+ * - We have an HDMI connector supporting RGB only
+ * - The chosen mode has a TMDS character rate higher than the display
+ * supports in RGB/12bpc
+ * - The chosen mode has a TMDS character rate lower than the display
+ * supports in RGB/10bpc.
+ *
+ * Then we will pick the latter, and the computed TMDS character rate
+ * will be equal to 1.25 times the mode pixel clock.
+ */
+static void drm_test_check_max_tmds_rate_bpc_fallback(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 10, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1250);
+}
+
+/*
+ * Test that if:
+ * - We have an HDMI connector supporting both RGB and YUV422 and up to
+ * 12 bpc
+ * - The chosen mode has a TMDS character rate higher than the display
+ * supports in RGB/12bpc
+ * - The chosen mode has a TMDS character rate lower than the display
+ * supports in YUV422/12bpc.
+ *
+ * Then we will pick the latter, and the computed TMDS character rate
+ * will be equal to the mode pixel clock.
+ */
+static void drm_test_check_max_tmds_rate_format_fallback(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 12);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_YUV422);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1000);
+}
+
+/*
+ * Test that if a driver and screen supports RGB and YUV formats, and we
+ * try to set the VIC 1 mode, we end up with 8bpc RGB even if we could
+ * have had a higher bpc.
+ */
+static void drm_test_check_output_bpc_format_vic_1(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *mode;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ mode = drm_display_mode_from_cea_vic(drm, 1);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ /*
+ * NOTE: We can't use drm_connector_hdmi_compute_mode_clock()
+ * here because we're trying to get the rate of an invalid
+ * configuration.
+ *
+ * Thus, we have to calculate the rate by hand.
+ */
+ rate = mode->clock * 1500;
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a driver supports only RGB but the screen also supports
+ * YUV formats, we only end up with an RGB format.
+ */
+static void drm_test_check_output_bpc_format_driver_rgb_only(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ /*
+ * We're making sure that YUV422 would be the preferred option
+ * here: we're always favouring higher bpc, we can't have RGB
+ * because the TMDS character rate exceeds the maximum supported
+ * by the display, and YUV422 works for that display.
+ *
+ * But since the driver only supports RGB, we should fallback to
+ * a lower bpc with RGB.
+ */
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a screen supports only RGB but the driver also supports
+ * YUV formats, we only end up with an RGB format.
+ */
+static void drm_test_check_output_bpc_format_display_rgb_only(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ /*
+ * We're making sure that YUV422 would be the preferred option
+ * here: we're always favouring higher bpc, we can't have RGB
+ * because the TMDS character rate exceeds the maximum supported
+ * by the display, and YUV422 works for that display.
+ *
+ * But since the display only supports RGB, we should fallback to
+ * a lower bpc with RGB.
+ */
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a display supports higher bpc but the driver only
+ * supports 8 bpc, we only end up with 8 bpc even if we could have had a
+ * higher bpc.
+ */
+static void drm_test_check_output_bpc_format_driver_8bpc_only(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ /*
+ * We're making sure that we have headroom on the TMDS character
+ * clock to actually use 12bpc.
+ */
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a driver supports higher bpc but the display only
+ * supports 8 bpc, we only end up with 8 bpc even if we could have had a
+ * higher bpc.
+ */
+static void drm_test_check_output_bpc_format_display_8bpc_only(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_max_340mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_340mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ /*
+ * We're making sure that we have headroom on the TMDS character
+ * clock to actually use 12bpc.
+ */
+ rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
@@ -1034,8 +1537,16 @@ static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
KUNIT_CASE(drm_test_check_hdmi_funcs_reject_rate),
+ KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback),
+ KUNIT_CASE(drm_test_check_max_tmds_rate_format_fallback),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
+ KUNIT_CASE(drm_test_check_output_bpc_dvi),
+ KUNIT_CASE(drm_test_check_output_bpc_format_vic_1),
+ KUNIT_CASE(drm_test_check_output_bpc_format_display_8bpc_only),
+ KUNIT_CASE(drm_test_check_output_bpc_format_display_rgb_only),
+ KUNIT_CASE(drm_test_check_output_bpc_format_driver_8bpc_only),
+ KUNIT_CASE(drm_test_check_output_bpc_format_driver_rgb_only),
KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_8bpc),
KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_10bpc),
KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_12bpc),
@@ -1167,7 +1678,7 @@ static void drm_test_check_format_value(struct kunit *test)

conn = &priv->connector;
conn_state = conn->state;
- KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, 0);
}

/*
diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.h b/drivers/gpu/drm/tests/drm_kunit_edid.h
index 24f3377ef0f0..3e3527c58c31 100644
--- a/drivers/gpu/drm/tests/drm_kunit_edid.h
+++ b/drivers/gpu/drm/tests/drm_kunit_edid.h
@@ -1,6 +1,64 @@
#ifndef DRM_KUNIT_EDID_H_
#define DRM_KUNIT_EDID_H_

+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 0a 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ab
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ * EDID Structure Version & Revision: 1.3
+ * Vendor & Product Identification:
+ * Manufacturer: LNX
+ * Model: 42
+ * Made in: 2023
+ * Basic Display Parameters & Features:
+ * Digital display
+ * DFP 1.x compatible TMDS
+ * Maximum image size: 160 cm x 90 cm
+ * Gamma: 2.20
+ * RGB color display
+ * First detailed timing is the preferred timing
+ * Color Characteristics:
+ * Red : 0.0000, 0.0000
+ * Green: 0.0000, 0.0000
+ * Blue : 0.0000, 0.0000
+ * White: 0.0000, 0.0000
+ * Established Timings I & II: none
+ * Standard Timings: none
+ * Detailed Timing Descriptors:
+ * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm)
+ * Hfront 88 Hsync 44 Hback 148 Hpol P
+ * Vfront 4 Vsync 5 Vback 36 Vpol P
+ * Display Product Name: 'Test EDID'
+ * Display Range Limits:
+ * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ * Dummy Descriptor:
+ * Checksum: 0xab
+ */
+const unsigned char test_edid_dvi_1080p[] = {
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+ 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+ 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+ 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+ 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+ 0x46, 0x1e, 0x46, 0x0f, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xab
+};
+
/*
* edid-decode (hex):
*
@@ -103,6 +161,108 @@ const unsigned char test_edid_hdmi_1080p_rgb_max_200mhz[] = {
0x00, 0x00, 0x00, 0xd0
};

+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 02 00 00 00 00 00 00 00
+ * 00 00 00 20 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 92
+ *
+ * 02 03 1b 81 e3 05 00 20 41 10 e2 00 4a 6d 03 0c
+ * 00 12 34 00 28 20 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ * EDID Structure Version & Revision: 1.3
+ * Vendor & Product Identification:
+ * Manufacturer: LNX
+ * Model: 42
+ * Made in: 2023
+ * Basic Display Parameters & Features:
+ * Digital display
+ * DFP 1.x compatible TMDS
+ * Maximum image size: 160 cm x 90 cm
+ * Gamma: 2.20
+ * Monochrome or grayscale display
+ * First detailed timing is the preferred timing
+ * Color Characteristics:
+ * Red : 0.0000, 0.0000
+ * Green: 0.0000, 0.0000
+ * Blue : 0.0000, 0.0000
+ * White: 0.0000, 0.0000
+ * Established Timings I & II:
+ * DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
+ * Standard Timings: none
+ * Detailed Timing Descriptors:
+ * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm)
+ * Hfront 88 Hsync 44 Hback 148 Hpol P
+ * Vfront 4 Vsync 5 Vback 36 Vpol P
+ * Display Product Name: 'Test EDID'
+ * Display Range Limits:
+ * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ * Dummy Descriptor:
+ * Extension blocks: 1
+ * Checksum: 0x92
+ *
+ * ----------------
+ *
+ * Block 1, CTA-861 Extension Block:
+ * Revision: 3
+ * Underscans IT Video Formats by default
+ * Native detailed modes: 1
+ * Colorimetry Data Block:
+ * sRGB
+ * Video Data Block:
+ * VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz
+ * Video Capability Data Block:
+ * YCbCr quantization: No Data
+ * RGB quantization: Selectable (via AVI Q)
+ * PT scan behavior: No Data
+ * IT scan behavior: Always Underscanned
+ * CE scan behavior: Always Underscanned
+ * Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
+ * Source physical address: 1.2.3.4
+ * Maximum TMDS clock: 340 MHz
+ * Extended HDMI video details:
+ * Checksum: 0xd0 Unused space in Extension Block: 100 bytes
+ */
+const unsigned char test_edid_hdmi_1080p_rgb_max_340mhz[] = {
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+ 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
+ 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+ 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+ 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+ 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+ 0x46, 0x00, 0x00, 0xc4, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x41, 0x02, 0x03, 0x1b, 0x81,
+ 0xe3, 0x05, 0x00, 0x20, 0x41, 0x10, 0xe2, 0x00, 0x4a, 0x6d, 0x03, 0x0c,
+ 0x00, 0x12, 0x34, 0x00, 0x44, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0xd0
+};
+
/*
* edid-decode (hex):
*

--
2.41.0

2023-11-28 10:28:28

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 24/45] drm/rockchip: inno_hdmi: Remove useless copy of drm_display_mode

The driver maintains a copy of the adjusted mode but doesn't use it
anywhere. Remove it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 4 ----
1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index cc48cbf85f31..4f5844fc115a 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -62,7 +62,6 @@ struct inno_hdmi {
unsigned int tmds_rate;

struct hdmi_data_info hdmi_data;
- struct drm_display_mode previous_mode;
};

static struct inno_hdmi *encoder_to_inno_hdmi(struct drm_encoder *encoder)
@@ -498,9 +497,6 @@ static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
struct inno_hdmi *hdmi = encoder_to_inno_hdmi(encoder);

inno_hdmi_setup(hdmi, adj_mode);
-
- /* Store the display mode for plugin/DPMS poweron events */
- drm_mode_copy(&hdmi->previous_mode, adj_mode);
}

static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)

--
2.41.0

2023-11-28 10:28:29

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 26/45] drm/rockchip: inno_hdmi: Get rid of mode_set

We're not doing anything special in atomic_mode_set so we can simply
merge it into atomic_enable.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index cc86d273ca4a..4db18195246e 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -490,21 +490,22 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
return 0;
}

-static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_crtc_state *crtc_state,
- struct drm_connector_state *conn_state)
-{
- struct drm_display_mode *adj_mode = &crtc_state->adjusted_mode;
- struct inno_hdmi *hdmi = encoder_to_inno_hdmi(encoder);
-
- inno_hdmi_setup(hdmi, adj_mode);
-}
-
static void inno_hdmi_encoder_enable(struct drm_encoder *encoder,
struct drm_atomic_state *state)
{
struct inno_hdmi *hdmi = encoder_to_inno_hdmi(encoder);
+ struct drm_connector_state *conn_state;
+ struct drm_crtc_state *crtc_state;

+ conn_state = drm_atomic_get_new_connector_state(state, &hdmi->connector);
+ if (WARN_ON(!conn_state))
+ return;
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
+ if (WARN_ON(!crtc_state))
+ return;
+
+ inno_hdmi_setup(hdmi, &crtc_state->adjusted_mode);
inno_hdmi_set_pwr_mode(hdmi, NORMAL);
}

@@ -533,7 +534,6 @@ static struct drm_encoder_helper_funcs inno_hdmi_encoder_helper_funcs = {
.atomic_check = inno_hdmi_encoder_atomic_check,
.atomic_enable = inno_hdmi_encoder_enable,
.atomic_disable = inno_hdmi_encoder_disable,
- .atomic_mode_set = inno_hdmi_encoder_mode_set,
};

static enum drm_connector_status

--
2.41.0

2023-11-28 10:28:31

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 25/45] drm/rockchip: inno_hdmi: Switch encoder hooks to atomic

The inno_hdmi encoder still uses the !atomic variants of enable, disable
and modeset. Convert to their atomic equivalents.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 4f5844fc115a..cc86d273ca4a 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -491,22 +491,25 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
}

static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adj_mode)
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
{
+ struct drm_display_mode *adj_mode = &crtc_state->adjusted_mode;
struct inno_hdmi *hdmi = encoder_to_inno_hdmi(encoder);

inno_hdmi_setup(hdmi, adj_mode);
}

-static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)
+static void inno_hdmi_encoder_enable(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
{
struct inno_hdmi *hdmi = encoder_to_inno_hdmi(encoder);

inno_hdmi_set_pwr_mode(hdmi, NORMAL);
}

-static void inno_hdmi_encoder_disable(struct drm_encoder *encoder)
+static void inno_hdmi_encoder_disable(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
{
struct inno_hdmi *hdmi = encoder_to_inno_hdmi(encoder);

@@ -527,10 +530,10 @@ inno_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
}

static struct drm_encoder_helper_funcs inno_hdmi_encoder_helper_funcs = {
- .enable = inno_hdmi_encoder_enable,
- .disable = inno_hdmi_encoder_disable,
- .mode_set = inno_hdmi_encoder_mode_set,
- .atomic_check = inno_hdmi_encoder_atomic_check,
+ .atomic_check = inno_hdmi_encoder_atomic_check,
+ .atomic_enable = inno_hdmi_encoder_enable,
+ .atomic_disable = inno_hdmi_encoder_disable,
+ .atomic_mode_set = inno_hdmi_encoder_mode_set,
};

static enum drm_connector_status

--
2.41.0

2023-11-28 10:28:34

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 27/45] drm/rockchip: inno_hdmi: no need to store vic

The mode's VIC is only ever used in the inno_hdmi_setup() function so
there's no need to store it in the main structure.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 4db18195246e..294f0d442c0c 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -28,7 +28,6 @@
#include "inno_hdmi.h"

struct hdmi_data_info {
- int vic;
bool sink_has_audio;
unsigned int enc_in_format;
unsigned int enc_out_format;
@@ -443,16 +442,15 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
struct drm_display_mode *mode)
{
struct drm_display_info *display = &hdmi->connector.display_info;
-
- hdmi->hdmi_data.vic = drm_match_cea_mode(mode);
+ u8 vic = drm_match_cea_mode(mode);

hdmi->hdmi_data.enc_in_format = HDMI_COLORSPACE_RGB;
hdmi->hdmi_data.enc_out_format = HDMI_COLORSPACE_RGB;

- if ((hdmi->hdmi_data.vic == 6) || (hdmi->hdmi_data.vic == 7) ||
- (hdmi->hdmi_data.vic == 21) || (hdmi->hdmi_data.vic == 22) ||
- (hdmi->hdmi_data.vic == 2) || (hdmi->hdmi_data.vic == 3) ||
- (hdmi->hdmi_data.vic == 17) || (hdmi->hdmi_data.vic == 18))
+ if ((vic == 6) || (vic == 7) ||
+ (vic == 21) || (vic == 22) ||
+ (vic == 2) || (vic == 3) ||
+ (vic == 17) || (vic == 18))
hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_601;
else
hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_709;

--
2.41.0

2023-11-28 10:28:43

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 29/45] drm/rockchip: inno_hdmi: Remove useless input format

The driver has a lot of logic to deal with multiple input formats, but
hardcodes it to RGB. This means that most of that code has been dead
code, so let's get rid of it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 39 +++++++++---------------------------
1 file changed, 10 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 3908dc09d85f..e0696ab16da3 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -28,7 +28,6 @@
#include "inno_hdmi.h"

struct hdmi_data_info {
- unsigned int enc_in_format;
unsigned int enc_out_format;
unsigned int colorimetry;
};
@@ -328,47 +327,30 @@ static int inno_hdmi_config_video_csc(struct inno_hdmi *hdmi)
v_VIDEO_INPUT_CSP(0);
hdmi_writeb(hdmi, HDMI_VIDEO_CONTRL2, value);

- if (data->enc_in_format == data->enc_out_format) {
- if ((data->enc_in_format == HDMI_COLORSPACE_RGB) ||
- (data->enc_in_format >= HDMI_COLORSPACE_YUV444)) {
- value = v_SOF_DISABLE | v_COLOR_DEPTH_NOT_INDICATED(1);
- hdmi_writeb(hdmi, HDMI_VIDEO_CONTRL3, value);
+ if (HDMI_COLORSPACE_RGB == data->enc_out_format) {
+ value = v_SOF_DISABLE | v_COLOR_DEPTH_NOT_INDICATED(1);
+ hdmi_writeb(hdmi, HDMI_VIDEO_CONTRL3, value);

- hdmi_modb(hdmi, HDMI_VIDEO_CONTRL,
- m_VIDEO_AUTO_CSC | m_VIDEO_C0_C2_SWAP,
- v_VIDEO_AUTO_CSC(AUTO_CSC_DISABLE) |
- v_VIDEO_C0_C2_SWAP(C0_C2_CHANGE_DISABLE));
- return 0;
- }
+ hdmi_modb(hdmi, HDMI_VIDEO_CONTRL,
+ m_VIDEO_AUTO_CSC | m_VIDEO_C0_C2_SWAP,
+ v_VIDEO_AUTO_CSC(AUTO_CSC_DISABLE) |
+ v_VIDEO_C0_C2_SWAP(C0_C2_CHANGE_DISABLE));
+ return 0;
}

if (data->colorimetry == HDMI_COLORIMETRY_ITU_601) {
- if ((data->enc_in_format == HDMI_COLORSPACE_RGB) &&
- (data->enc_out_format == HDMI_COLORSPACE_YUV444)) {
+ if (data->enc_out_format == HDMI_COLORSPACE_YUV444) {
csc_mode = CSC_RGB_0_255_TO_ITU601_16_235_8BIT;
auto_csc = AUTO_CSC_DISABLE;
c0_c2_change = C0_C2_CHANGE_DISABLE;
csc_enable = v_CSC_ENABLE;
- } else if ((data->enc_in_format == HDMI_COLORSPACE_YUV444) &&
- (data->enc_out_format == HDMI_COLORSPACE_RGB)) {
- csc_mode = CSC_ITU601_16_235_TO_RGB_0_255_8BIT;
- auto_csc = AUTO_CSC_ENABLE;
- c0_c2_change = C0_C2_CHANGE_DISABLE;
- csc_enable = v_CSC_DISABLE;
}
} else {
- if ((data->enc_in_format == HDMI_COLORSPACE_RGB) &&
- (data->enc_out_format == HDMI_COLORSPACE_YUV444)) {
+ if (data->enc_out_format == HDMI_COLORSPACE_YUV444) {
csc_mode = CSC_RGB_0_255_TO_ITU709_16_235_8BIT;
auto_csc = AUTO_CSC_DISABLE;
c0_c2_change = C0_C2_CHANGE_DISABLE;
csc_enable = v_CSC_ENABLE;
- } else if ((data->enc_in_format == HDMI_COLORSPACE_YUV444) &&
- (data->enc_out_format == HDMI_COLORSPACE_RGB)) {
- csc_mode = CSC_ITU709_16_235_TO_RGB_0_255_8BIT;
- auto_csc = AUTO_CSC_ENABLE;
- c0_c2_change = C0_C2_CHANGE_DISABLE;
- csc_enable = v_CSC_DISABLE;
}
}

@@ -443,7 +425,6 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
struct drm_display_info *display = &hdmi->connector.display_info;
u8 vic = drm_match_cea_mode(mode);

- hdmi->hdmi_data.enc_in_format = HDMI_COLORSPACE_RGB;
hdmi->hdmi_data.enc_out_format = HDMI_COLORSPACE_RGB;

if ((vic == 6) || (vic == 7) ||

--
2.41.0

2023-11-28 10:28:52

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 28/45] drm/rockchip: inno_hdmi: Remove unneeded has audio flag

The sink_has_audio flag is not used anywhere in the driver so let's get
rid of it. It's redundant with drm_display_info.has_audio anyway.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 2 --
1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 294f0d442c0c..3908dc09d85f 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -28,7 +28,6 @@
#include "inno_hdmi.h"

struct hdmi_data_info {
- bool sink_has_audio;
unsigned int enc_in_format;
unsigned int enc_out_format;
unsigned int colorimetry;
@@ -554,7 +553,6 @@ static int inno_hdmi_connector_get_modes(struct drm_connector *connector)

edid = drm_get_edid(connector, hdmi->ddc);
if (edid) {
- hdmi->hdmi_data.sink_has_audio = drm_detect_monitor_audio(edid);
drm_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
kfree(edid);

--
2.41.0

2023-11-28 10:29:09

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 30/45] drm/rockchip: inno_hdmi: Remove useless output format

Similarly to the input format, the driver has a lot of code to deal with
various output format, but the driver hardcodes it to RGB always.

Let's get rid of the dead code.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 57 ++++--------------------------------
1 file changed, 6 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index e0696ab16da3..0c6c550e0ce7 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -28,7 +28,6 @@
#include "inno_hdmi.h"

struct hdmi_data_info {
- unsigned int enc_out_format;
unsigned int colorimetry;
};

@@ -296,26 +295,14 @@ static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
rc = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
&hdmi->connector,
mode);
-
- if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV444)
- frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
- else if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV422)
- frame.avi.colorspace = HDMI_COLORSPACE_YUV422;
- else
- frame.avi.colorspace = HDMI_COLORSPACE_RGB;
+ frame.avi.colorspace = HDMI_COLORSPACE_RGB;

return inno_hdmi_upload_frame(hdmi, rc, &frame, INFOFRAME_AVI, 0, 0, 0);
}

static int inno_hdmi_config_video_csc(struct inno_hdmi *hdmi)
{
- struct hdmi_data_info *data = &hdmi->hdmi_data;
- int c0_c2_change = 0;
- int csc_enable = 0;
- int csc_mode = 0;
- int auto_csc = 0;
int value;
- int i;

/* Input video mode is SDR RGB24bit, data enable signal from external */
hdmi_writeb(hdmi, HDMI_VIDEO_CONTRL1, v_DE_EXTERNAL |
@@ -327,43 +314,13 @@ static int inno_hdmi_config_video_csc(struct inno_hdmi *hdmi)
v_VIDEO_INPUT_CSP(0);
hdmi_writeb(hdmi, HDMI_VIDEO_CONTRL2, value);

- if (HDMI_COLORSPACE_RGB == data->enc_out_format) {
- value = v_SOF_DISABLE | v_COLOR_DEPTH_NOT_INDICATED(1);
- hdmi_writeb(hdmi, HDMI_VIDEO_CONTRL3, value);
-
- hdmi_modb(hdmi, HDMI_VIDEO_CONTRL,
- m_VIDEO_AUTO_CSC | m_VIDEO_C0_C2_SWAP,
- v_VIDEO_AUTO_CSC(AUTO_CSC_DISABLE) |
- v_VIDEO_C0_C2_SWAP(C0_C2_CHANGE_DISABLE));
- return 0;
- }
-
- if (data->colorimetry == HDMI_COLORIMETRY_ITU_601) {
- if (data->enc_out_format == HDMI_COLORSPACE_YUV444) {
- csc_mode = CSC_RGB_0_255_TO_ITU601_16_235_8BIT;
- auto_csc = AUTO_CSC_DISABLE;
- c0_c2_change = C0_C2_CHANGE_DISABLE;
- csc_enable = v_CSC_ENABLE;
- }
- } else {
- if (data->enc_out_format == HDMI_COLORSPACE_YUV444) {
- csc_mode = CSC_RGB_0_255_TO_ITU709_16_235_8BIT;
- auto_csc = AUTO_CSC_DISABLE;
- c0_c2_change = C0_C2_CHANGE_DISABLE;
- csc_enable = v_CSC_ENABLE;
- }
- }
-
- for (i = 0; i < 24; i++)
- hdmi_writeb(hdmi, HDMI_VIDEO_CSC_COEF + i,
- coeff_csc[csc_mode][i]);
-
- value = v_SOF_DISABLE | csc_enable | v_COLOR_DEPTH_NOT_INDICATED(1);
+ value = v_SOF_DISABLE | v_COLOR_DEPTH_NOT_INDICATED(1);
hdmi_writeb(hdmi, HDMI_VIDEO_CONTRL3, value);
- hdmi_modb(hdmi, HDMI_VIDEO_CONTRL, m_VIDEO_AUTO_CSC |
- m_VIDEO_C0_C2_SWAP, v_VIDEO_AUTO_CSC(auto_csc) |
- v_VIDEO_C0_C2_SWAP(c0_c2_change));

+ hdmi_modb(hdmi, HDMI_VIDEO_CONTRL,
+ m_VIDEO_AUTO_CSC | m_VIDEO_C0_C2_SWAP,
+ v_VIDEO_AUTO_CSC(AUTO_CSC_DISABLE) |
+ v_VIDEO_C0_C2_SWAP(C0_C2_CHANGE_DISABLE));
return 0;
}

@@ -425,8 +382,6 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
struct drm_display_info *display = &hdmi->connector.display_info;
u8 vic = drm_match_cea_mode(mode);

- hdmi->hdmi_data.enc_out_format = HDMI_COLORSPACE_RGB;
-
if ((vic == 6) || (vic == 7) ||
(vic == 21) || (vic == 22) ||
(vic == 2) || (vic == 3) ||

--
2.41.0

2023-11-28 10:29:17

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 33/45] drm/rockchip: inno_hdmi: Remove tmds rate from structure

The tmds_rate field in the inno_hdmi structure is used mostly to
configure the internal i2c controller divider through a call to the
inno_hdmi_i2c_init() function.

We can simply make that rate an argument to that function, which also
removes a workaround to initialize the divider at probe time when we
don't have a mode yet.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index f05417c6b637..35f44e556fcf 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -50,8 +50,6 @@ struct inno_hdmi {

struct inno_hdmi_i2c *i2c;
struct i2c_adapter *ddc;
-
- unsigned int tmds_rate;
};

static struct inno_hdmi *encoder_to_inno_hdmi(struct drm_encoder *encoder)
@@ -155,11 +153,11 @@ static inline void hdmi_modb(struct inno_hdmi *hdmi, u16 offset,
hdmi_writeb(hdmi, offset, temp);
}

-static void inno_hdmi_i2c_init(struct inno_hdmi *hdmi)
+static void inno_hdmi_i2c_init(struct inno_hdmi *hdmi, unsigned long long rate)
{
- int ddc_bus_freq;
+ unsigned long long ddc_bus_freq = rate >> 2;

- ddc_bus_freq = (hdmi->tmds_rate >> 2) / HDMI_SCL_RATE;
+ do_div(ddc_bus_freq, HDMI_SCL_RATE);

hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
@@ -389,8 +387,7 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
* DCLK_LCDC, so we need to init the TMDS rate to mode pixel
* clock rate, and reconfigure the DDC clock.
*/
- hdmi->tmds_rate = mode->clock * 1000;
- inno_hdmi_i2c_init(hdmi);
+ inno_hdmi_i2c_init(hdmi, mode->clock * 1000);

/* Unmute video and audio output */
hdmi_modb(hdmi, HDMI_AV_MUTE, m_AUDIO_MUTE | m_VIDEO_BLACK,
@@ -768,8 +765,7 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
* PCLK_HDMI, so we need to init the TMDS rate to PCLK rate,
* and reconfigure the DDC clock.
*/
- hdmi->tmds_rate = clk_get_rate(hdmi->pclk);
- inno_hdmi_i2c_init(hdmi);
+ inno_hdmi_i2c_init(hdmi, clk_get_rate(hdmi->pclk));

ret = inno_hdmi_register(drm, hdmi);
if (ret)

--
2.41.0

2023-11-28 10:29:22

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 32/45] drm/rockchip: inno_hdmi: Remove useless enum

The CSC_* enum has no users left, so let's remove it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 9 ---------
1 file changed, 9 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index c342bc8b3a23..f05417c6b637 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -66,15 +66,6 @@ static struct inno_hdmi *connector_to_inno_hdmi(struct drm_connector *connector)
return container_of(connector, struct inno_hdmi, connector);
}

-enum {
- CSC_ITU601_16_235_TO_RGB_0_255_8BIT,
- CSC_ITU601_0_255_TO_RGB_0_255_8BIT,
- CSC_ITU709_16_235_TO_RGB_0_255_8BIT,
- CSC_RGB_0_255_TO_ITU601_16_235_8BIT,
- CSC_RGB_0_255_TO_ITU709_16_235_8BIT,
- CSC_RGB_0_255_TO_RGB_16_235_8BIT,
-};
-
static const char coeff_csc[][24] = {
/*
* YUV2RGB:601 SD mode(Y[16:235], UV[16:240], RGB[0:255]):

--
2.41.0

2023-11-28 10:29:32

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 31/45] drm/rockchip: inno_hdmi: Remove useless colorimetry

The colorimetry field of hdmi_data_info is not used anywhere so we can
get rid of it. This was the last field left in that structure so we can
get rid of it too.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 15 ---------------
1 file changed, 15 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 0c6c550e0ce7..c342bc8b3a23 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -27,10 +27,6 @@

#include "inno_hdmi.h"

-struct hdmi_data_info {
- unsigned int colorimetry;
-};
-
struct inno_hdmi_i2c {
struct i2c_adapter adap;

@@ -56,8 +52,6 @@ struct inno_hdmi {
struct i2c_adapter *ddc;

unsigned int tmds_rate;
-
- struct hdmi_data_info hdmi_data;
};

static struct inno_hdmi *encoder_to_inno_hdmi(struct drm_encoder *encoder)
@@ -380,15 +374,6 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
struct drm_display_mode *mode)
{
struct drm_display_info *display = &hdmi->connector.display_info;
- u8 vic = drm_match_cea_mode(mode);
-
- if ((vic == 6) || (vic == 7) ||
- (vic == 21) || (vic == 22) ||
- (vic == 2) || (vic == 3) ||
- (vic == 17) || (vic == 18))
- hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_601;
- else
- hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_709;

/* Mute video and audio output */
hdmi_modb(hdmi, HDMI_AV_MUTE, m_AUDIO_MUTE | m_VIDEO_BLACK,

--
2.41.0

2023-11-28 10:29:38

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 34/45] drm/rockchip: inno_hdmi: Remove useless coeff_csc matrix

The coeff_csc matrix isn't used anymore, let's remove it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 70 ------------------------------------
1 file changed, 70 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 35f44e556fcf..e4fe02b79a98 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -64,76 +64,6 @@ static struct inno_hdmi *connector_to_inno_hdmi(struct drm_connector *connector)
return container_of(connector, struct inno_hdmi, connector);
}

-static const char coeff_csc[][24] = {
- /*
- * YUV2RGB:601 SD mode(Y[16:235], UV[16:240], RGB[0:255]):
- * R = 1.164*Y + 1.596*V - 204
- * G = 1.164*Y - 0.391*U - 0.813*V + 154
- * B = 1.164*Y + 2.018*U - 258
- */
- {
- 0x04, 0xa7, 0x00, 0x00, 0x06, 0x62, 0x02, 0xcc,
- 0x04, 0xa7, 0x11, 0x90, 0x13, 0x40, 0x00, 0x9a,
- 0x04, 0xa7, 0x08, 0x12, 0x00, 0x00, 0x03, 0x02
- },
- /*
- * YUV2RGB:601 SD mode(YUV[0:255],RGB[0:255]):
- * R = Y + 1.402*V - 248
- * G = Y - 0.344*U - 0.714*V + 135
- * B = Y + 1.772*U - 227
- */
- {
- 0x04, 0x00, 0x00, 0x00, 0x05, 0x9b, 0x02, 0xf8,
- 0x04, 0x00, 0x11, 0x60, 0x12, 0xdb, 0x00, 0x87,
- 0x04, 0x00, 0x07, 0x16, 0x00, 0x00, 0x02, 0xe3
- },
- /*
- * YUV2RGB:709 HD mode(Y[16:235],UV[16:240],RGB[0:255]):
- * R = 1.164*Y + 1.793*V - 248
- * G = 1.164*Y - 0.213*U - 0.534*V + 77
- * B = 1.164*Y + 2.115*U - 289
- */
- {
- 0x04, 0xa7, 0x00, 0x00, 0x07, 0x2c, 0x02, 0xf8,
- 0x04, 0xa7, 0x10, 0xda, 0x12, 0x22, 0x00, 0x4d,
- 0x04, 0xa7, 0x08, 0x74, 0x00, 0x00, 0x03, 0x21
- },
-
- /*
- * RGB2YUV:601 SD mode:
- * Cb = -0.291G - 0.148R + 0.439B + 128
- * Y = 0.504G + 0.257R + 0.098B + 16
- * Cr = -0.368G + 0.439R - 0.071B + 128
- */
- {
- 0x11, 0x5f, 0x01, 0x82, 0x10, 0x23, 0x00, 0x80,
- 0x02, 0x1c, 0x00, 0xa1, 0x00, 0x36, 0x00, 0x1e,
- 0x11, 0x29, 0x10, 0x59, 0x01, 0x82, 0x00, 0x80
- },
- /*
- * RGB2YUV:709 HD mode:
- * Cb = - 0.338G - 0.101R + 0.439B + 128
- * Y = 0.614G + 0.183R + 0.062B + 16
- * Cr = - 0.399G + 0.439R - 0.040B + 128
- */
- {
- 0x11, 0x98, 0x01, 0xc1, 0x10, 0x28, 0x00, 0x80,
- 0x02, 0x74, 0x00, 0xbb, 0x00, 0x3f, 0x00, 0x10,
- 0x11, 0x5a, 0x10, 0x67, 0x01, 0xc1, 0x00, 0x80
- },
- /*
- * RGB[0:255]2RGB[16:235]:
- * R' = R x (235-16)/255 + 16;
- * G' = G x (235-16)/255 + 16;
- * B' = B x (235-16)/255 + 16;
- */
- {
- 0x00, 0x00, 0x03, 0x6F, 0x00, 0x00, 0x00, 0x10,
- 0x03, 0x6F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
- 0x00, 0x00, 0x00, 0x00, 0x03, 0x6F, 0x00, 0x10
- },
-};
-
static inline u8 hdmi_readb(struct inno_hdmi *hdmi, u16 offset)
{
return readl_relaxed(hdmi->regs + (offset) * 0x04);

--
2.41.0

2023-11-28 10:29:38

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 35/45] drm/rockchip: inno_hdmi: Remove useless mode_valid

The inno_hdmi mode_valid implementation always return MODE_OK which is
what the core assumes when we don't have an implementation.

Let's get rid of it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 8 --------
1 file changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index e4fe02b79a98..59b2b676b7b8 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -400,13 +400,6 @@ static int inno_hdmi_connector_get_modes(struct drm_connector *connector)
return ret;
}

-static enum drm_mode_status
-inno_hdmi_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- return MODE_OK;
-}
-
static int
inno_hdmi_probe_single_connector_modes(struct drm_connector *connector,
uint32_t maxX, uint32_t maxY)
@@ -431,7 +424,6 @@ static const struct drm_connector_funcs inno_hdmi_connector_funcs = {

static struct drm_connector_helper_funcs inno_hdmi_connector_helper_funcs = {
.get_modes = inno_hdmi_connector_get_modes,
- .mode_valid = inno_hdmi_connector_mode_valid,
};

static int inno_hdmi_register(struct drm_device *drm, struct inno_hdmi *hdmi)

--
2.41.0

2023-11-28 10:29:46

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 36/45] drm/rockchip: inno_hdmi: Move infoframe disable to separate function

The code to upload infoframes to the controller uses a weird construct
which, based on the previous function call return code, will either
disable or enable that infoframe.

In order to get rid of that argument, let's split the function to
disable the infoframe into a separate function and make it obvious what
we are doing in the error path.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 53 +++++++++++++++++++++++-------------
1 file changed, 34 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 59b2b676b7b8..e3a421d98dd4 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -156,33 +156,38 @@ static void inno_hdmi_reset(struct inno_hdmi *hdmi)
inno_hdmi_set_pwr_mode(hdmi, NORMAL);
}

-static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi, int setup_rc,
- union hdmi_infoframe *frame, u32 frame_index,
- u32 mask, u32 disable, u32 enable)
+static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi,
+ u32 frame_index,
+ u32 mask, u32 disable)
{
if (mask)
hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, disable);

hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_BUF_INDEX, frame_index);
+}

- if (setup_rc >= 0) {
- u8 packed_frame[HDMI_MAXIMUM_INFO_FRAME_SIZE];
- ssize_t rc, i;
+static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi,
+ union hdmi_infoframe *frame, u32 frame_index,
+ u32 mask, u32 disable, u32 enable)
+{
+ u8 packed_frame[HDMI_MAXIMUM_INFO_FRAME_SIZE];
+ ssize_t rc, i;

- rc = hdmi_infoframe_pack(frame, packed_frame,
- sizeof(packed_frame));
- if (rc < 0)
- return rc;
+ inno_hdmi_disable_frame(hdmi, frame_index, mask, disable);

- for (i = 0; i < rc; i++)
- hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i,
- packed_frame[i]);
+ rc = hdmi_infoframe_pack(frame, packed_frame,
+ sizeof(packed_frame));
+ if (rc < 0)
+ return rc;

- if (mask)
- hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, enable);
- }
+ for (i = 0; i < rc; i++)
+ hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i,
+ packed_frame[i]);

- return setup_rc;
+ if (mask)
+ hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, enable);
+
+ return 0;
}

static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi,
@@ -194,8 +199,13 @@ static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi,
rc = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
&hdmi->connector,
mode);
+ if (rc) {
+ inno_hdmi_disable_frame(hdmi, INFOFRAME_VSI,
+ m_PACKET_VSI_EN, v_PACKET_VSI_EN(0));
+ return rc;
+ }

- return inno_hdmi_upload_frame(hdmi, rc, &frame, INFOFRAME_VSI,
+ return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_VSI,
m_PACKET_VSI_EN, v_PACKET_VSI_EN(0), v_PACKET_VSI_EN(1));
}

@@ -208,9 +218,14 @@ static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
rc = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
&hdmi->connector,
mode);
+ if (rc) {
+ inno_hdmi_disable_frame(hdmi, INFOFRAME_AVI, 0, 0);
+ return rc;
+ }
+
frame.avi.colorspace = HDMI_COLORSPACE_RGB;

- return inno_hdmi_upload_frame(hdmi, rc, &frame, INFOFRAME_AVI, 0, 0, 0);
+ return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_AVI, 0, 0, 0);
}

static int inno_hdmi_config_video_csc(struct inno_hdmi *hdmi)

--
2.41.0

2023-11-28 10:29:54

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 38/45] drm/rockchip: inno_hdmi: Switch to infoframe type

The inno_hdmi driver relies on its own internal infoframe type matching
the hardware.

This works fine, but in order to make further reworks easier, let's
switch to the HDMI spec definition of those types.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 71 +++++++++++++++++++++++-------------
1 file changed, 45 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index bc7fb1278cb2..ed1d10efbef4 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -156,61 +156,80 @@ static void inno_hdmi_reset(struct inno_hdmi *hdmi)
inno_hdmi_set_pwr_mode(hdmi, NORMAL);
}

+static u32 inno_hdmi_get_frame_index(struct inno_hdmi *hdmi,
+ enum hdmi_infoframe_type type)
+{
+ struct drm_device *drm = hdmi->connector.dev;
+
+ switch (type) {
+ case HDMI_INFOFRAME_TYPE_VENDOR:
+ return INFOFRAME_VSI;
+ case HDMI_INFOFRAME_TYPE_AVI:
+ return INFOFRAME_AVI;
+ default:
+ drm_err(drm, "Unknown infoframe type: %u\n", type);
+ }
+
+ return 0;
+}
+
static u32 inno_hdmi_get_frame_mask(struct inno_hdmi *hdmi,
- u32 frame_index)
+ enum hdmi_infoframe_type type)
{
struct drm_device *drm = hdmi->connector.dev;

- switch (frame_index) {
- case INFOFRAME_VSI:
+ switch (type) {
+ case HDMI_INFOFRAME_TYPE_VENDOR:
return m_PACKET_VSI_EN;
- case INFOFRAME_AVI:
+ case HDMI_INFOFRAME_TYPE_AVI:
return 0;
default:
- drm_err(drm, "Unknown infoframe type: %u\n", frame_index);
+ drm_err(drm, "Unknown infoframe type: %u\n", type);
}

return 0;
}

static u32 inno_hdmi_get_frame_disable(struct inno_hdmi *hdmi,
- u32 frame_index)
+ enum hdmi_infoframe_type type)
{
struct drm_device *drm = hdmi->connector.dev;

- switch (frame_index) {
- case INFOFRAME_VSI:
+ switch (type) {
+ case HDMI_INFOFRAME_TYPE_VENDOR:
return v_PACKET_VSI_EN(0);
- case INFOFRAME_AVI:
+ case HDMI_INFOFRAME_TYPE_AVI:
return 0;
default:
- drm_err(drm, "Unknown infoframe type: %u\n", frame_index);
+ drm_err(drm, "Unknown infoframe type: %u\n", type);
}

return 0;
}

static u32 inno_hdmi_get_frame_enable(struct inno_hdmi *hdmi,
- u32 frame_index)
+ enum hdmi_infoframe_type type)
{
struct drm_device *drm = hdmi->connector.dev;

- switch (frame_index) {
- case INFOFRAME_VSI:
+ switch (type) {
+ case HDMI_INFOFRAME_TYPE_VENDOR:
return v_PACKET_VSI_EN(1);
- case INFOFRAME_AVI:
+ case HDMI_INFOFRAME_TYPE_AVI:
return 0;
default:
- drm_err(drm, "Unknown infoframe type: %u\n", frame_index);
+ drm_err(drm, "Unknown infoframe type: %u\n", type);
}

return 0;
}

-static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi, u32 frame_index)
+static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi,
+ enum hdmi_infoframe_type type)
{
- u32 disable = inno_hdmi_get_frame_disable(hdmi, frame_index);
- u32 mask = inno_hdmi_get_frame_mask(hdmi, frame_index);
+ u32 frame_index = inno_hdmi_get_frame_index(hdmi, type);
+ u32 disable = inno_hdmi_get_frame_disable(hdmi, type);
+ u32 mask = inno_hdmi_get_frame_mask(hdmi, type);

if (mask)
hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, disable);
@@ -219,14 +238,14 @@ static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi, u32 frame_index)
}

static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi,
- union hdmi_infoframe *frame, u32 frame_index)
+ union hdmi_infoframe *frame, enum hdmi_infoframe_type type)
{
- u32 enable = inno_hdmi_get_frame_enable(hdmi, frame_index);
- u32 mask = inno_hdmi_get_frame_mask(hdmi, frame_index);
+ u32 enable = inno_hdmi_get_frame_enable(hdmi, type);
+ u32 mask = inno_hdmi_get_frame_mask(hdmi, type);
u8 packed_frame[HDMI_MAXIMUM_INFO_FRAME_SIZE];
ssize_t rc, i;

- inno_hdmi_disable_frame(hdmi, frame_index);
+ inno_hdmi_disable_frame(hdmi, type);

rc = hdmi_infoframe_pack(frame, packed_frame,
sizeof(packed_frame));
@@ -253,11 +272,11 @@ static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi,
&hdmi->connector,
mode);
if (rc) {
- inno_hdmi_disable_frame(hdmi, INFOFRAME_VSI);
+ inno_hdmi_disable_frame(hdmi, HDMI_INFOFRAME_TYPE_VENDOR);
return rc;
}

- return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_VSI);
+ return inno_hdmi_upload_frame(hdmi, &frame, HDMI_INFOFRAME_TYPE_VENDOR);
}

static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
@@ -270,13 +289,13 @@ static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
&hdmi->connector,
mode);
if (rc) {
- inno_hdmi_disable_frame(hdmi, INFOFRAME_AVI);
+ inno_hdmi_disable_frame(hdmi, HDMI_INFOFRAME_TYPE_AVI);
return rc;
}

frame.avi.colorspace = HDMI_COLORSPACE_RGB;

- return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_AVI);
+ return inno_hdmi_upload_frame(hdmi, &frame, HDMI_INFOFRAME_TYPE_AVI);
}

static int inno_hdmi_config_video_csc(struct inno_hdmi *hdmi)

--
2.41.0

2023-11-28 10:30:01

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 39/45] drm/rockchip: inno_hdmi: Remove unused drm device pointer

The drm_dev field in the inno_hdmi struct stores a pointer to the DRM
device but is never used anywhere in the driver. Let's remove it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 2 --
1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index ed1d10efbef4..d0b463d166fb 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -39,7 +39,6 @@ struct inno_hdmi_i2c {

struct inno_hdmi {
struct device *dev;
- struct drm_device *drm_dev;

int irq;
struct clk *pclk;
@@ -732,7 +731,6 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
return -ENOMEM;

hdmi->dev = dev;
- hdmi->drm_dev = drm;

hdmi->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(hdmi->regs))

--
2.41.0

2023-11-28 10:30:20

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 41/45] drm/sun4i: hdmi: Convert encoder to atomic

The sun4i_hdmi driver still uses the non-atomic variants of the encoder
hooks, so let's convert to their atomic equivalents.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index 152375f3de2e..799a26215cc2 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -82,7 +82,8 @@ static int sun4i_hdmi_atomic_check(struct drm_encoder *encoder,
return 0;
}

-static void sun4i_hdmi_disable(struct drm_encoder *encoder)
+static void sun4i_hdmi_disable(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
{
struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
u32 val;
@@ -96,7 +97,8 @@ static void sun4i_hdmi_disable(struct drm_encoder *encoder)
clk_disable_unprepare(hdmi->tmds_clk);
}

-static void sun4i_hdmi_enable(struct drm_encoder *encoder)
+static void sun4i_hdmi_enable(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
{
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
@@ -120,9 +122,10 @@ static void sun4i_hdmi_enable(struct drm_encoder *encoder)
}

static void sun4i_hdmi_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
{
+ const struct drm_display_mode *mode = &crtc_state->mode;
struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
unsigned int x, y;
u32 val;
@@ -201,9 +204,9 @@ static enum drm_mode_status sun4i_hdmi_mode_valid(struct drm_encoder *encoder,

static const struct drm_encoder_helper_funcs sun4i_hdmi_helper_funcs = {
.atomic_check = sun4i_hdmi_atomic_check,
- .disable = sun4i_hdmi_disable,
- .enable = sun4i_hdmi_enable,
- .mode_set = sun4i_hdmi_mode_set,
+ .atomic_disable = sun4i_hdmi_disable,
+ .atomic_enable = sun4i_hdmi_enable,
+ .atomic_mode_set = sun4i_hdmi_mode_set,
.mode_valid = sun4i_hdmi_mode_valid,
};


--
2.41.0

2023-11-28 10:30:29

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 37/45] drm/rockchip: inno_hdmi: Create mask retrieval functions

The register mask and bits to enable or disable a given infoframe
depends on its type.

This is currently passed as an argument to the function that writes an
infoframe, but let's create a helper function to retrieve them based on
the type to make further reworks easier.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 75 ++++++++++++++++++++++++++++++------
1 file changed, 63 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index e3a421d98dd4..bc7fb1278cb2 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -156,10 +156,62 @@ static void inno_hdmi_reset(struct inno_hdmi *hdmi)
inno_hdmi_set_pwr_mode(hdmi, NORMAL);
}

-static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi,
- u32 frame_index,
- u32 mask, u32 disable)
+static u32 inno_hdmi_get_frame_mask(struct inno_hdmi *hdmi,
+ u32 frame_index)
{
+ struct drm_device *drm = hdmi->connector.dev;
+
+ switch (frame_index) {
+ case INFOFRAME_VSI:
+ return m_PACKET_VSI_EN;
+ case INFOFRAME_AVI:
+ return 0;
+ default:
+ drm_err(drm, "Unknown infoframe type: %u\n", frame_index);
+ }
+
+ return 0;
+}
+
+static u32 inno_hdmi_get_frame_disable(struct inno_hdmi *hdmi,
+ u32 frame_index)
+{
+ struct drm_device *drm = hdmi->connector.dev;
+
+ switch (frame_index) {
+ case INFOFRAME_VSI:
+ return v_PACKET_VSI_EN(0);
+ case INFOFRAME_AVI:
+ return 0;
+ default:
+ drm_err(drm, "Unknown infoframe type: %u\n", frame_index);
+ }
+
+ return 0;
+}
+
+static u32 inno_hdmi_get_frame_enable(struct inno_hdmi *hdmi,
+ u32 frame_index)
+{
+ struct drm_device *drm = hdmi->connector.dev;
+
+ switch (frame_index) {
+ case INFOFRAME_VSI:
+ return v_PACKET_VSI_EN(1);
+ case INFOFRAME_AVI:
+ return 0;
+ default:
+ drm_err(drm, "Unknown infoframe type: %u\n", frame_index);
+ }
+
+ return 0;
+}
+
+static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi, u32 frame_index)
+{
+ u32 disable = inno_hdmi_get_frame_disable(hdmi, frame_index);
+ u32 mask = inno_hdmi_get_frame_mask(hdmi, frame_index);
+
if (mask)
hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, disable);

@@ -167,13 +219,14 @@ static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi,
}

static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi,
- union hdmi_infoframe *frame, u32 frame_index,
- u32 mask, u32 disable, u32 enable)
+ union hdmi_infoframe *frame, u32 frame_index)
{
+ u32 enable = inno_hdmi_get_frame_enable(hdmi, frame_index);
+ u32 mask = inno_hdmi_get_frame_mask(hdmi, frame_index);
u8 packed_frame[HDMI_MAXIMUM_INFO_FRAME_SIZE];
ssize_t rc, i;

- inno_hdmi_disable_frame(hdmi, frame_index, mask, disable);
+ inno_hdmi_disable_frame(hdmi, frame_index);

rc = hdmi_infoframe_pack(frame, packed_frame,
sizeof(packed_frame));
@@ -200,13 +253,11 @@ static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi,
&hdmi->connector,
mode);
if (rc) {
- inno_hdmi_disable_frame(hdmi, INFOFRAME_VSI,
- m_PACKET_VSI_EN, v_PACKET_VSI_EN(0));
+ inno_hdmi_disable_frame(hdmi, INFOFRAME_VSI);
return rc;
}

- return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_VSI,
- m_PACKET_VSI_EN, v_PACKET_VSI_EN(0), v_PACKET_VSI_EN(1));
+ return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_VSI);
}

static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
@@ -219,13 +270,13 @@ static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
&hdmi->connector,
mode);
if (rc) {
- inno_hdmi_disable_frame(hdmi, INFOFRAME_AVI, 0, 0);
+ inno_hdmi_disable_frame(hdmi, INFOFRAME_AVI);
return rc;
}

frame.avi.colorspace = HDMI_COLORSPACE_RGB;

- return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_AVI, 0, 0, 0);
+ return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_AVI);
}

static int inno_hdmi_config_video_csc(struct inno_hdmi *hdmi)

--
2.41.0

2023-11-28 10:30:31

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 40/45] drm/rockchip: inno_hdmi: Switch to HDMI connector

The new HDMI connector infrastructure allows to remove some boilerplate,
especially to generate infoframes. Let's switch to it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/rockchip/inno_hdmi.c | 101 ++++++++++++++---------------------
1 file changed, 41 insertions(+), 60 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index d0b463d166fb..d5661ef5e00b 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -223,9 +223,10 @@ static u32 inno_hdmi_get_frame_enable(struct inno_hdmi *hdmi,
return 0;
}

-static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi,
- enum hdmi_infoframe_type type)
+static int inno_hdmi_disable_frame(struct drm_connector *connector,
+ enum hdmi_infoframe_type type)
{
+ struct inno_hdmi *hdmi = connector_to_inno_hdmi(connector);
u32 frame_index = inno_hdmi_get_frame_index(hdmi, type);
u32 disable = inno_hdmi_get_frame_disable(hdmi, type);
u32 mask = inno_hdmi_get_frame_mask(hdmi, type);
@@ -234,24 +235,23 @@ static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi,
hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, disable);

hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_BUF_INDEX, frame_index);
+
+ return 0;
}

-static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi,
- union hdmi_infoframe *frame, enum hdmi_infoframe_type type)
+static int inno_hdmi_upload_frame(struct drm_connector *connector,
+ enum hdmi_infoframe_type type,
+ const u8 *buffer, size_t len)
{
+ struct inno_hdmi *hdmi = connector_to_inno_hdmi(connector);
u32 enable = inno_hdmi_get_frame_enable(hdmi, type);
u32 mask = inno_hdmi_get_frame_mask(hdmi, type);
u8 packed_frame[HDMI_MAXIMUM_INFO_FRAME_SIZE];
- ssize_t rc, i;
+ ssize_t i;

- inno_hdmi_disable_frame(hdmi, type);
+ inno_hdmi_disable_frame(connector, type);

- rc = hdmi_infoframe_pack(frame, packed_frame,
- sizeof(packed_frame));
- if (rc < 0)
- return rc;
-
- for (i = 0; i < rc; i++)
+ for (i = 0; i < len; i++)
hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i,
packed_frame[i]);

@@ -261,41 +261,10 @@ static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi,
return 0;
}

-static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi,
- struct drm_display_mode *mode)
-{
- union hdmi_infoframe frame;
- int rc;
-
- rc = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
- &hdmi->connector,
- mode);
- if (rc) {
- inno_hdmi_disable_frame(hdmi, HDMI_INFOFRAME_TYPE_VENDOR);
- return rc;
- }
-
- return inno_hdmi_upload_frame(hdmi, &frame, HDMI_INFOFRAME_TYPE_VENDOR);
-}
-
-static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
- struct drm_display_mode *mode)
-{
- union hdmi_infoframe frame;
- int rc;
-
- rc = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
- &hdmi->connector,
- mode);
- if (rc) {
- inno_hdmi_disable_frame(hdmi, HDMI_INFOFRAME_TYPE_AVI);
- return rc;
- }
-
- frame.avi.colorspace = HDMI_COLORSPACE_RGB;
-
- return inno_hdmi_upload_frame(hdmi, &frame, HDMI_INFOFRAME_TYPE_AVI);
-}
+static const struct drm_connector_hdmi_funcs inno_hdmi_hdmi_connector_funcs = {
+ .clear_infoframe = inno_hdmi_disable_frame,
+ .write_infoframe = inno_hdmi_upload_frame,
+};

static int inno_hdmi_config_video_csc(struct inno_hdmi *hdmi)
{
@@ -374,9 +343,12 @@ static int inno_hdmi_config_video_timing(struct inno_hdmi *hdmi,
}

static int inno_hdmi_setup(struct inno_hdmi *hdmi,
- struct drm_display_mode *mode)
+ struct drm_crtc_state *new_crtc_state,
+ struct drm_connector_state *new_conn_state)
{
- struct drm_display_info *display = &hdmi->connector.display_info;
+ struct drm_connector *connector = &hdmi->connector;
+ struct drm_display_info *display = &connector->display_info;
+ struct drm_display_mode *mode = &new_crtc_state->adjusted_mode;

/* Mute video and audio output */
hdmi_modb(hdmi, HDMI_AV_MUTE, m_AUDIO_MUTE | m_VIDEO_BLACK,
@@ -390,10 +362,8 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,

inno_hdmi_config_video_csc(hdmi);

- if (display->is_hdmi) {
- inno_hdmi_config_video_avi(hdmi, mode);
- inno_hdmi_config_video_vsi(hdmi, mode);
- }
+ drm_atomic_helper_connector_hdmi_update_infoframes(connector,
+ new_conn_state->state);

/*
* When IP controller have configured to an accurate video
@@ -401,7 +371,7 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
* DCLK_LCDC, so we need to init the TMDS rate to mode pixel
* clock rate, and reconfigure the DDC clock.
*/
- inno_hdmi_i2c_init(hdmi, mode->clock * 1000);
+ inno_hdmi_i2c_init(hdmi, new_conn_state->hdmi.tmds_char_rate);

/* Unmute video and audio output */
hdmi_modb(hdmi, HDMI_AV_MUTE, m_AUDIO_MUTE | m_VIDEO_BLACK,
@@ -425,7 +395,7 @@ static void inno_hdmi_encoder_enable(struct drm_encoder *encoder,
if (WARN_ON(!crtc_state))
return;

- inno_hdmi_setup(hdmi, &crtc_state->adjusted_mode);
+ inno_hdmi_setup(hdmi, crtc_state, conn_state);
inno_hdmi_set_pwr_mode(hdmi, NORMAL);
}

@@ -491,6 +461,12 @@ inno_hdmi_probe_single_connector_modes(struct drm_connector *connector,
return drm_helper_probe_single_connector_modes(connector, 1920, 1080);
}

+static void inno_hdmi_connector_reset(struct drm_connector *connector)
+{
+ drm_atomic_helper_connector_reset(connector);
+ __drm_atomic_helper_connector_hdmi_reset(connector, connector->state);
+}
+
static void inno_hdmi_connector_destroy(struct drm_connector *connector)
{
drm_connector_unregister(connector);
@@ -501,12 +477,13 @@ static const struct drm_connector_funcs inno_hdmi_connector_funcs = {
.fill_modes = inno_hdmi_probe_single_connector_modes,
.detect = inno_hdmi_connector_detect,
.destroy = inno_hdmi_connector_destroy,
- .reset = drm_atomic_helper_connector_reset,
+ .reset = inno_hdmi_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};

static struct drm_connector_helper_funcs inno_hdmi_connector_helper_funcs = {
+ .atomic_check = drm_atomic_helper_connector_hdmi_check,
.get_modes = inno_hdmi_connector_get_modes,
};

@@ -533,10 +510,14 @@ static int inno_hdmi_register(struct drm_device *drm, struct inno_hdmi *hdmi)

drm_connector_helper_add(&hdmi->connector,
&inno_hdmi_connector_helper_funcs);
- drm_connector_init_with_ddc(drm, &hdmi->connector,
- &inno_hdmi_connector_funcs,
- DRM_MODE_CONNECTOR_HDMIA,
- hdmi->ddc);
+ drmm_connector_hdmi_init(drm, &hdmi->connector,
+ "Rockchip", "Inno HDMI",
+ &inno_hdmi_connector_funcs,
+ &inno_hdmi_hdmi_connector_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ hdmi->ddc,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);

drm_connector_attach_encoder(&hdmi->connector, encoder);


--
2.41.0

2023-11-28 10:30:49

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 43/45] drm/sun4i: hdmi: Switch to container_of_const

container_of_const() allows to preserve the pointer constness and is
thus more flexible than inline functions.

Let's switch all our instances of container_of() to container_of_const().

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index bae69d696765..c276d984da6b 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -30,19 +30,11 @@
#include "sun4i_drv.h"
#include "sun4i_hdmi.h"

-static inline struct sun4i_hdmi *
-drm_encoder_to_sun4i_hdmi(struct drm_encoder *encoder)
-{
- return container_of(encoder, struct sun4i_hdmi,
- encoder);
-}
+#define drm_encoder_to_sun4i_hdmi(e) \
+ container_of_const(e, struct sun4i_hdmi, encoder)

-static inline struct sun4i_hdmi *
-drm_connector_to_sun4i_hdmi(struct drm_connector *connector)
-{
- return container_of(connector, struct sun4i_hdmi,
- connector);
-}
+#define drm_connector_to_sun4i_hdmi(c) \
+ container_of_const(c, struct sun4i_hdmi, connector)

static int sun4i_hdmi_setup_avi_infoframes(struct sun4i_hdmi *hdmi,
struct drm_display_mode *mode)

--
2.41.0

2023-11-28 10:30:55

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 42/45] drm/sun4i: hdmi: Move mode_set into enable

We're not doing anything special in atomic_mode_set so we can simply
merge it into atomic_enable.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 38 +++++++++++++---------------------
1 file changed, 14 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index 799a26215cc2..bae69d696765 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -103,33 +103,11 @@ static void sun4i_hdmi_enable(struct drm_encoder *encoder,
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
struct drm_display_info *display = &hdmi->connector.display_info;
+ unsigned int x, y;
u32 val = 0;

DRM_DEBUG_DRIVER("Enabling the HDMI Output\n");

- clk_prepare_enable(hdmi->tmds_clk);
-
- sun4i_hdmi_setup_avi_infoframes(hdmi, mode);
- val |= SUN4I_HDMI_PKT_CTRL_TYPE(0, SUN4I_HDMI_PKT_AVI);
- val |= SUN4I_HDMI_PKT_CTRL_TYPE(1, SUN4I_HDMI_PKT_END);
- writel(val, hdmi->base + SUN4I_HDMI_PKT_CTRL_REG(0));
-
- val = SUN4I_HDMI_VID_CTRL_ENABLE;
- if (display->is_hdmi)
- val |= SUN4I_HDMI_VID_CTRL_HDMI_MODE;
-
- writel(val, hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
-}
-
-static void sun4i_hdmi_mode_set(struct drm_encoder *encoder,
- struct drm_crtc_state *crtc_state,
- struct drm_connector_state *conn_state)
-{
- const struct drm_display_mode *mode = &crtc_state->mode;
- struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
- unsigned int x, y;
- u32 val;
-
clk_set_rate(hdmi->mod_clk, mode->crtc_clock * 1000);
clk_set_rate(hdmi->tmds_clk, mode->crtc_clock * 1000);

@@ -181,6 +159,19 @@ static void sun4i_hdmi_mode_set(struct drm_encoder *encoder,
val |= SUN4I_HDMI_VID_TIMING_POL_VSYNC;

writel(val, hdmi->base + SUN4I_HDMI_VID_TIMING_POL_REG);
+
+ clk_prepare_enable(hdmi->tmds_clk);
+
+ sun4i_hdmi_setup_avi_infoframes(hdmi, mode);
+ val |= SUN4I_HDMI_PKT_CTRL_TYPE(0, SUN4I_HDMI_PKT_AVI);
+ val |= SUN4I_HDMI_PKT_CTRL_TYPE(1, SUN4I_HDMI_PKT_END);
+ writel(val, hdmi->base + SUN4I_HDMI_PKT_CTRL_REG(0));
+
+ val = SUN4I_HDMI_VID_CTRL_ENABLE;
+ if (display->is_hdmi)
+ val |= SUN4I_HDMI_VID_CTRL_HDMI_MODE;
+
+ writel(val, hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
}

static enum drm_mode_status sun4i_hdmi_mode_valid(struct drm_encoder *encoder,
@@ -206,7 +197,6 @@ static const struct drm_encoder_helper_funcs sun4i_hdmi_helper_funcs = {
.atomic_check = sun4i_hdmi_atomic_check,
.atomic_disable = sun4i_hdmi_disable,
.atomic_enable = sun4i_hdmi_enable,
- .atomic_mode_set = sun4i_hdmi_mode_set,
.mode_valid = sun4i_hdmi_mode_valid,
};


--
2.41.0

2023-11-28 10:31:04

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 45/45] drm/sun4i: hdmi: Switch to HDMI connector

The new HDMI connector infrastructure allows to remove some boilerplate,
especially to generate infoframes. Let's switch to it.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 80 ++++++++++++++++++++++------------
1 file changed, 51 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index b7cf369b1906..8a9106a39f23 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -36,30 +36,24 @@
#define drm_connector_to_sun4i_hdmi(c) \
container_of_const(c, struct sun4i_hdmi, connector)

-static int sun4i_hdmi_setup_avi_infoframes(struct sun4i_hdmi *hdmi,
- struct drm_display_mode *mode)
+static int sun4i_hdmi_write_infoframe(struct drm_connector *connector,
+ enum hdmi_infoframe_type type,
+ const u8 *buffer, size_t len)
{
- struct hdmi_avi_infoframe frame;
- u8 buffer[17];
- int i, ret;
+ struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
+ int i;

- ret = drm_hdmi_avi_infoframe_from_display_mode(&frame,
- &hdmi->connector, mode);
- if (ret < 0) {
- DRM_ERROR("Failed to get infoframes from mode\n");
- return ret;
+ if (type != HDMI_INFOFRAME_TYPE_AVI) {
+ drm_err(connector->dev,
+ "Unsupported infoframe type: %u\n", type);
+ return 0;
}

- ret = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer));
- if (ret < 0) {
- DRM_ERROR("Failed to pack infoframes\n");
- return ret;
- }
-
- for (i = 0; i < sizeof(buffer); i++)
+ for (i = 0; i < len; i++)
writeb(buffer[i], hdmi->base + SUN4I_HDMI_AVI_INFOFRAME_REG(i));

return 0;
+
}

static void sun4i_hdmi_disable(struct drm_encoder *encoder,
@@ -82,14 +76,18 @@ static void sun4i_hdmi_enable(struct drm_encoder *encoder,
{
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
- struct drm_display_info *display = &hdmi->connector.display_info;
+ struct drm_connector *connector = &hdmi->connector;
+ struct drm_display_info *display = &connector->display_info;
+ struct drm_connector_state *conn_state =
+ drm_atomic_get_new_connector_state(state, connector);
+ unsigned long long tmds_rate = conn_state->hdmi.tmds_char_rate;
unsigned int x, y;
u32 val = 0;

DRM_DEBUG_DRIVER("Enabling the HDMI Output\n");

- clk_set_rate(hdmi->mod_clk, mode->crtc_clock * 1000);
- clk_set_rate(hdmi->tmds_clk, mode->crtc_clock * 1000);
+ clk_set_rate(hdmi->mod_clk, tmds_rate);
+ clk_set_rate(hdmi->tmds_clk, tmds_rate);

/* Set input sync enable */
writel(SUN4I_HDMI_UNKNOWN_INPUT_SYNC,
@@ -142,7 +140,8 @@ static void sun4i_hdmi_enable(struct drm_encoder *encoder,

clk_prepare_enable(hdmi->tmds_clk);

- sun4i_hdmi_setup_avi_infoframes(hdmi, mode);
+ drm_atomic_helper_connector_hdmi_update_infoframes(connector, state);
+
val |= SUN4I_HDMI_PKT_CTRL_TYPE(0, SUN4I_HDMI_PKT_AVI);
val |= SUN4I_HDMI_PKT_CTRL_TYPE(1, SUN4I_HDMI_PKT_END);
writel(val, hdmi->base + SUN4I_HDMI_PKT_CTRL_REG(0));
@@ -195,7 +194,7 @@ static int sun4i_hdmi_connector_atomic_check(struct drm_connector *connector,
enum drm_mode_status status;

status = sun4i_hdmi_connector_clock_valid(connector, mode,
- mode->clock * 1000);
+ conn_state->hdmi.tmds_char_rate);
if (status != MODE_OK)
return -EINVAL;

@@ -206,8 +205,11 @@ static enum drm_mode_status
sun4i_hdmi_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
- return sun4i_hdmi_connector_clock_valid(connector, mode,
- mode->clock * 1000);
+ unsigned long long rate =
+ drm_connector_hdmi_compute_mode_clock(mode, 8,
+ HDMI_COLORSPACE_RGB);
+
+ return sun4i_hdmi_connector_clock_valid(connector, mode, rate);
}

static int sun4i_hdmi_get_modes(struct drm_connector *connector)
@@ -253,6 +255,11 @@ static struct i2c_adapter *sun4i_hdmi_get_ddc(struct device *dev)
return ddc;
}

+static const struct drm_connector_hdmi_funcs sun4i_hdmi_hdmi_connector_funcs = {
+ .tmds_char_rate_valid = sun4i_hdmi_connector_clock_valid,
+ .write_infoframe = sun4i_hdmi_write_infoframe,
+};
+
static const struct drm_connector_helper_funcs sun4i_hdmi_connector_helper_funcs = {
.atomic_check = sun4i_hdmi_connector_atomic_check,
.mode_valid = sun4i_hdmi_connector_mode_valid,
@@ -274,11 +281,17 @@ sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force)
return connector_status_connected;
}

+static void sun4i_hdmi_connector_reset(struct drm_connector *connector)
+{
+ drm_atomic_helper_connector_reset(connector);
+ __drm_atomic_helper_connector_hdmi_reset(connector, connector->state);
+}
+
static const struct drm_connector_funcs sun4i_hdmi_connector_funcs = {
.detect = sun4i_hdmi_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
- .reset = drm_atomic_helper_connector_reset,
+ .reset = sun4i_hdmi_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
@@ -637,10 +650,19 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,

drm_connector_helper_add(&hdmi->connector,
&sun4i_hdmi_connector_helper_funcs);
- ret = drm_connector_init_with_ddc(drm, &hdmi->connector,
- &sun4i_hdmi_connector_funcs,
- DRM_MODE_CONNECTOR_HDMIA,
- hdmi->ddc_i2c);
+ ret = drmm_connector_hdmi_init(drm, &hdmi->connector,
+ /*
+ * NOTE: Those are likely to be
+ * wrong, but I couldn't find the
+ * actual ones in the BSP.
+ */
+ "AW", "HDMI",
+ &sun4i_hdmi_connector_funcs,
+ &sun4i_hdmi_hdmi_connector_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ hdmi->ddc_i2c,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
if (ret) {
dev_err(dev,
"Couldn't initialise the HDMI connector\n");

--
2.41.0

2023-11-28 10:40:12

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 44/45] drm/sun4i: hdmi: Consolidate atomic_check and mode_valid

atomic_check and mode_valid do not check for the same things which can
lead to surprising result if the userspace commits a mode that didn't go
through mode_valid. Let's merge the two implementations into a function
called by both.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 74 +++++++++++++++++++++-------------
1 file changed, 47 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index c276d984da6b..b7cf369b1906 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -62,18 +62,6 @@ static int sun4i_hdmi_setup_avi_infoframes(struct sun4i_hdmi *hdmi,
return 0;
}

-static int sun4i_hdmi_atomic_check(struct drm_encoder *encoder,
- struct drm_crtc_state *crtc_state,
- struct drm_connector_state *conn_state)
-{
- struct drm_display_mode *mode = &crtc_state->mode;
-
- if (mode->flags & DRM_MODE_FLAG_DBLCLK)
- return -EINVAL;
-
- return 0;
-}
-
static void sun4i_hdmi_disable(struct drm_encoder *encoder,
struct drm_atomic_state *state)
{
@@ -166,31 +154,61 @@ static void sun4i_hdmi_enable(struct drm_encoder *encoder,
writel(val, hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
}

-static enum drm_mode_status sun4i_hdmi_mode_valid(struct drm_encoder *encoder,
- const struct drm_display_mode *mode)
+static const struct drm_encoder_helper_funcs sun4i_hdmi_helper_funcs = {
+ .atomic_disable = sun4i_hdmi_disable,
+ .atomic_enable = sun4i_hdmi_enable,
+};
+
+static enum drm_mode_status
+sun4i_hdmi_connector_clock_valid(const struct drm_connector *connector,
+ const struct drm_display_mode *mode,
+ unsigned long long clock)
{
- struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
- unsigned long rate = mode->clock * 1000;
- unsigned long diff = rate / 200; /* +-0.5% allowed by HDMI spec */
+ const struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
+ unsigned long diff = clock / 200; /* +-0.5% allowed by HDMI spec */
long rounded_rate;

+ if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+ return MODE_BAD;
+
/* 165 MHz is the typical max pixelclock frequency for HDMI <= 1.2 */
- if (rate > 165000000)
+ if (clock > 165000000)
return MODE_CLOCK_HIGH;
- rounded_rate = clk_round_rate(hdmi->tmds_clk, rate);
+
+ rounded_rate = clk_round_rate(hdmi->tmds_clk, clock);
if (rounded_rate > 0 &&
- max_t(unsigned long, rounded_rate, rate) -
- min_t(unsigned long, rounded_rate, rate) < diff)
+ max_t(unsigned long, rounded_rate, clock) -
+ min_t(unsigned long, rounded_rate, clock) < diff)
return MODE_OK;
+
return MODE_NOCLOCK;
}

-static const struct drm_encoder_helper_funcs sun4i_hdmi_helper_funcs = {
- .atomic_check = sun4i_hdmi_atomic_check,
- .atomic_disable = sun4i_hdmi_disable,
- .atomic_enable = sun4i_hdmi_enable,
- .mode_valid = sun4i_hdmi_mode_valid,
-};
+static int sun4i_hdmi_connector_atomic_check(struct drm_connector *connector,
+ struct drm_atomic_state *state)
+{
+ struct drm_connector_state *conn_state =
+ drm_atomic_get_new_connector_state(state, connector);
+ struct drm_crtc *crtc = conn_state->crtc;
+ struct drm_crtc_state *crtc_state = crtc->state;
+ struct drm_display_mode *mode = &crtc_state->adjusted_mode;
+ enum drm_mode_status status;
+
+ status = sun4i_hdmi_connector_clock_valid(connector, mode,
+ mode->clock * 1000);
+ if (status != MODE_OK)
+ return -EINVAL;
+
+ return 0;
+}
+
+static enum drm_mode_status
+sun4i_hdmi_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ return sun4i_hdmi_connector_clock_valid(connector, mode,
+ mode->clock * 1000);
+}

static int sun4i_hdmi_get_modes(struct drm_connector *connector)
{
@@ -236,6 +254,8 @@ static struct i2c_adapter *sun4i_hdmi_get_ddc(struct device *dev)
}

static const struct drm_connector_helper_funcs sun4i_hdmi_connector_helper_funcs = {
+ .atomic_check = sun4i_hdmi_connector_atomic_check,
+ .mode_valid = sun4i_hdmi_connector_mode_valid,
.get_modes = sun4i_hdmi_get_modes,
};


--
2.41.0

2023-11-28 10:46:11

by Hans Verkuil

[permalink] [raw]
Subject: Re: [PATCH v4 00/45] drm/connector: Create HDMI Connector infrastructure

On 28/11/2023 11:24, Maxime Ripard wrote:
> Hi,
>
> Here's a series that creates some extra infrastructure specifically
> targeted at HDMI controllers.
>
> The idea behind this series came from a recent discussion on IRC during
> which we discussed infoframes generation of i915 vs everything else.
>
> Infoframes generation code still requires some decent boilerplate, with
> each driver doing some variation of it.
>
> In parallel, while working on vc4, we ended up converting a lot of i915
> logic (mostly around format / bpc selection, and scrambler setup) to
> apply on top of a driver that relies only on helpers.
>
> While currently sitting in the vc4 driver, none of that logic actually
> relies on any driver or hardware-specific behaviour.
>
> The only missing piece to make it shareable are a bunch of extra
> variables stored in a state (current bpc, format, RGB range selection,
> etc.).
>
> The initial implementation was relying on some generic subclass of
> drm_connector to address HDMI connectors, with a bunch of helpers that
> will take care of all the "HDMI Spec" related code. Scrambler setup is
> missing at the moment but can easily be plugged in.
>
> The feedback was that creating a connector subclass like was done for
> writeback would prevent the adoption of those helpers since it couldn't
> be used in all situations (like when the connector driver can implement
> multiple output) and required more churn to cast between the
> drm_connector and its subclass. The decision was thus to provide a set
> of helper and to store the required variables in drm_connector and
> drm_connector_state. This what has been implemented now.
>
> Hans Verkuil also expressed interest in implementing a mechanism in v4l2
> to retrieve infoframes from HDMI receiver and implementing an
> infoframe-decode tool.

For those who are interested in the InfoFrame parser:

https://git.linuxtv.org/hverkuil/edid-decode.git/log/?h=hverkuil

This is work-in-progress, and will definitely be rebased at times.

It is integrated into edid-decode since I want to be able to check the
InfoFrames against the EDID capabilities. If no EDID is given, then
those checks are skipped.

You can parse the InfoFrames with -I <path-to-if-file>. All known InfoFrames
are parsed, and I am working on adding the checks against the EDID whenever
time permits.

It's quite handy already as a parser, but it is really the checks against the
EDID that will make this really useful.

A related note: exposing InfoFrames is equally useful for the media subsystem
for video receivers (and the odd V4L2 video transmitter driver). I did look
at whether any of this drm code could be generalized, but it is too different
and frankly not worth the effort.

Also, when receiving InfoFrames you don't want to use the hdmi.h functions,
you want to dump the raw unprocessed InfoFrame.

I did a proof-of-concept for the adv7511-v4l2 tx and adv7604 rx drivers here:

https://git.linuxtv.org/hverkuil/media_tree.git/commit/?h=infoframe&id=19c80e21b30e2cafc0669cfae093a0b7a17c6b55

I am using debugfs here as well, but I am not actually certain whether that's
the best approach, esp. for receivers where access to InfoFrames can be very
useful for userspace. Options are e.g. /sys/class/video4linux/<devnode>/infoframes
or perhaps using V4L2 controls. TBD.

Regards,

Hans

>
> This series thus leverages the infoframe generation code to expose it
> through debugfs.
>
> I also used the occasion to unit-test everything but the infoframe
> generation, which can come later once I get a proper understanding of
> what the infoframe are supposed to look like. This required to add some
> extra kunit helpers and infrastructure to have multiple EDIDs and allow
> each test to run with a particular set of capabilities.
>
> This entire series has been tested on a Pi4, passes all its unittests
> (125 new tests), and has only been build-tested for sunxi and rockchip.
>
> Let me know what you think,
> Maxime
>
> Signed-off-by: Maxime Ripard <[email protected]>
> ---
> Changes in v4:
> - Create unit tests for everything but infoframes
> - Fix a number of bugs identified by the unit tests
> - Rename DRM (Dynamic Range and Mastering) infoframe file to HDR_DRM
> - Drop RFC status
> - Link to v3: https://lore.kernel.org/r/[email protected]
>
> Changes in v3:
> - Made sure the series work on the RaspberryPi4
> - Handle YUV420 in the char clock rate computation
> - Use the maximum bpc value the connector allows at reset
> - Expose the RGB Limited vs Full Range value in the connector state
> instead of through a helper
> - Fix Broadcast RGB documentation
> - Add more debug logging
> - Small fixes here and there
> - Link to v2: https://lore.kernel.org/r/[email protected]
>
> Changes in v2:
> - Change from a subclass to a set of helpers for drm_connector and
> drm_connector state
> - Don't assume that all drivers support RGB, YUV420 and YUV422 but make
> them provide a bitfield instead.
> - Don't assume that all drivers support the Broadcast RGB property but
> make them call the registration helper.
> - Document the Broacast RGB property
> - Convert the inno_hdmi and sun4i_hdmi driver.
> - Link to v1: https://lore.kernel.org/r/[email protected]
>
> ---
> Maxime Ripard (45):
> drm/tests: helpers: Include missing drm_drv header
> drm/tests: helpers: Add atomic helpers
> drm/tests: Add helper to create mock plane
> drm/tests: Add helper to create mock crtc
> drm/connector: Check drm_connector_init pointers arguments
> drm/tests: connector: Add tests for drmm_connector_init
> drm/connector: Introduce an HDMI connector initialization function
> drm/connector: hdmi: Create an HDMI sub-state
> drm/connector: hdmi: Add Broadcast RGB property
> drm/connector: hdmi: Add RGB Quantization Range to the connector state
> drm/connector: hdmi: Add output BPC to the connector state
> drm/connector: hdmi: Add support for output format
> drm/connector: hdmi: Add HDMI compute clock helper
> drm/connector: hdmi: Calculate TMDS character rate
> drm/connector: hdmi: Add custom hook to filter TMDS character rate
> drm/connector: hdmi: Compute bpc and format automatically
> drm/connector: hdmi: Add Infoframes generation
> drm/connector: hdmi: Create Infoframe DebugFS entries
> drm/vc4: hdmi: Create destroy state implementation
> drm/vc4: hdmi: Switch to HDMI connector
> drm/vc4: tests: Remove vc4_dummy_plane structure
> drm/vc4: tests: Convert to plane creation helper
> drm/rockchip: inno_hdmi: Remove useless mode_fixup
> drm/rockchip: inno_hdmi: Remove useless copy of drm_display_mode
> drm/rockchip: inno_hdmi: Switch encoder hooks to atomic
> drm/rockchip: inno_hdmi: Get rid of mode_set
> drm/rockchip: inno_hdmi: no need to store vic
> drm/rockchip: inno_hdmi: Remove unneeded has audio flag
> drm/rockchip: inno_hdmi: Remove useless input format
> drm/rockchip: inno_hdmi: Remove useless output format
> drm/rockchip: inno_hdmi: Remove useless colorimetry
> drm/rockchip: inno_hdmi: Remove useless enum
> drm/rockchip: inno_hdmi: Remove tmds rate from structure
> drm/rockchip: inno_hdmi: Remove useless coeff_csc matrix
> drm/rockchip: inno_hdmi: Remove useless mode_valid
> drm/rockchip: inno_hdmi: Move infoframe disable to separate function
> drm/rockchip: inno_hdmi: Create mask retrieval functions
> drm/rockchip: inno_hdmi: Switch to infoframe type
> drm/rockchip: inno_hdmi: Remove unused drm device pointer
> drm/rockchip: inno_hdmi: Switch to HDMI connector
> drm/sun4i: hdmi: Convert encoder to atomic
> drm/sun4i: hdmi: Move mode_set into enable
> drm/sun4i: hdmi: Switch to container_of_const
> drm/sun4i: hdmi: Consolidate atomic_check and mode_valid
> drm/sun4i: hdmi: Switch to HDMI connector
>
> Documentation/gpu/kms-properties.csv | 1 -
> drivers/gpu/drm/Kconfig | 1 +
> drivers/gpu/drm/drm_atomic.c | 11 +
> drivers/gpu/drm/drm_atomic_state_helper.c | 659 ++++++++
> drivers/gpu/drm/drm_atomic_uapi.c | 4 +
> drivers/gpu/drm/drm_connector.c | 249 +++
> drivers/gpu/drm/drm_debugfs.c | 110 ++
> drivers/gpu/drm/rockchip/inno_hdmi.c | 409 ++---
> drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 203 ++-
> drivers/gpu/drm/tests/Makefile | 1 +
> .../gpu/drm/tests/drm_atomic_state_helper_test.c | 1728 ++++++++++++++++++++
> drivers/gpu/drm/tests/drm_connector_test.c | 1345 ++++++++++++++-
> drivers/gpu/drm/tests/drm_kunit_edid.h | 482 ++++++
> drivers/gpu/drm/tests/drm_kunit_helpers.c | 150 ++
> drivers/gpu/drm/vc4/tests/vc4_mock.c | 6 +-
> drivers/gpu/drm/vc4/tests/vc4_mock.h | 9 +-
> drivers/gpu/drm/vc4/tests/vc4_mock_plane.c | 44 +-
> drivers/gpu/drm/vc4/vc4_hdmi.c | 624 +------
> drivers/gpu/drm/vc4/vc4_hdmi.h | 44 +-
> drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 6 +-
> include/drm/drm_atomic_state_helper.h | 12 +
> include/drm/drm_connector.h | 257 +++
> include/drm/drm_kunit_helpers.h | 23 +
> 23 files changed, 5389 insertions(+), 989 deletions(-)
> ---
> base-commit: 815d8b0425ad1164e45953ac3d56a9f6f63792cc
> change-id: 20230814-kms-hdmi-connector-state-616787e67927
>
> Best regards,

2023-11-28 10:49:10

by Maxime Ripard

[permalink] [raw]
Subject: [PATCH v4 11/45] drm/connector: hdmi: Add output BPC to the connector state

We'll add automatic selection of the output BPC in a following patch,
but let's add it to the HDMI connector state already.

Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/drm_atomic.c | 1 +
drivers/gpu/drm/drm_atomic_state_helper.c | 7 +-
drivers/gpu/drm/drm_connector.c | 20 +-
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 227 ++++++++++++++++++++-
drivers/gpu/drm/tests/drm_connector_test.c | 162 ++++++++++++++-
include/drm/drm_connector.h | 13 +-
6 files changed, 408 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 5708a53bee93..67554f68f368 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1147,6 +1147,7 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
drm_printf(p, "\tbroadcast_rgb=%s\n",
drm_hdmi_connector_get_broadcast_rgb_name(state->hdmi.broadcast_rgb));
drm_printf(p, "\tis_full_range=%c\n", state->hdmi.is_full_range ? 'y' : 'n');
+ drm_printf(p, "\toutput_bpc=%u\n", state->hdmi.output_bpc);
}

if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index d0c24971537b..4e6ef58562c3 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -570,6 +570,10 @@ EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
void __drm_atomic_helper_connector_hdmi_reset(struct drm_connector *connector,
struct drm_connector_state *new_state)
{
+ unsigned int max_bpc = connector->max_bpc;
+
+ new_state->max_bpc = max_bpc;
+ new_state->max_requested_bpc = max_bpc;
new_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_AUTO;
}
EXPORT_SYMBOL(__drm_atomic_helper_connector_hdmi_reset);
@@ -686,7 +690,8 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,

new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);

- if (old_state->hdmi.broadcast_rgb != new_state->hdmi.broadcast_rgb) {
+ if (old_state->hdmi.broadcast_rgb != new_state->hdmi.broadcast_rgb ||
+ old_state->hdmi.output_bpc != new_state->hdmi.output_bpc) {
struct drm_crtc *crtc = new_state->crtc;
struct drm_crtc_state *crtc_state;

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 8f57e59dfe72..3e7453ed9413 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -462,6 +462,7 @@ EXPORT_SYMBOL(drmm_connector_init);
* @funcs: callbacks for this connector
* @connector_type: user visible type of the connector
* @ddc: optional pointer to the associated ddc adapter
+ * @max_bpc: Maximum bits per char the HDMI connector supports
*
* Initialises a preallocated HDMI connector. Connectors can be
* subclassed as part of driver connector objects.
@@ -478,7 +479,8 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
struct drm_connector *connector,
const struct drm_connector_funcs *funcs,
int connector_type,
- struct i2c_adapter *ddc)
+ struct i2c_adapter *ddc,
+ unsigned int max_bpc)
{
int ret;

@@ -486,10 +488,26 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
connector_type == DRM_MODE_CONNECTOR_HDMIB))
return -EINVAL;

+ if (!(max_bpc == 8 || max_bpc == 10 || max_bpc == 12))
+ return -EINVAL;
+
ret = drmm_connector_init(dev, connector, funcs, connector_type, ddc);
if (ret)
return ret;

+ /*
+ * drm_connector_attach_max_bpc_property() requires the
+ * connector to have a state.
+ */
+ if (connector->funcs->reset)
+ connector->funcs->reset(connector);
+
+ drm_connector_attach_max_bpc_property(connector, 8, max_bpc);
+ connector->max_bpc = max_bpc;
+
+ if (max_bpc > 8)
+ drm_connector_attach_hdr_output_metadata_property(connector);
+
return 0;
}
EXPORT_SYMBOL(drmm_connector_hdmi_init);
diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
index 7750c3d214a4..a1b0e6914cf8 100644
--- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
@@ -146,7 +146,8 @@ static const struct drm_connector_funcs dummy_connector_funcs = {

static
struct drm_atomic_helper_connector_hdmi_priv *
-drm_atomic_helper_connector_hdmi_init(struct kunit *test)
+drm_atomic_helper_connector_hdmi_init(struct kunit *test,
+ unsigned int max_bpc)
{
struct drm_atomic_helper_connector_hdmi_priv *priv;
struct drm_connector *conn;
@@ -188,7 +189,8 @@ drm_atomic_helper_connector_hdmi_init(struct kunit *test)
ret = drmm_connector_hdmi_init(drm, conn,
&dummy_connector_funcs,
DRM_MODE_CONNECTOR_HDMIA,
- NULL);
+ NULL,
+ max_bpc);
KUNIT_ASSERT_EQ(test, ret, 0);

drm_connector_helper_add(conn, &dummy_connector_helper_funcs);
@@ -223,7 +225,7 @@ static void drm_test_check_broadcast_rgb_crtc_mode_changed(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test);
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

ctx = drm_kunit_helper_acquire_ctx_alloc(test);
@@ -284,7 +286,7 @@ static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *tes
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test);
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

ctx = drm_kunit_helper_acquire_ctx_alloc(test);
@@ -345,7 +347,7 @@ static void drm_test_check_broadcast_rgb_auto_cea_mode(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test);
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -399,7 +401,7 @@ static void drm_test_check_broadcast_rgb_auto_cea_mode_vic_1(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test);
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -452,7 +454,7 @@ static void drm_test_check_broadcast_rgb_full_cea_mode(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test);
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -508,7 +510,7 @@ static void drm_test_check_broadcast_rgb_full_cea_mode_vic_1(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test);
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -563,7 +565,7 @@ static void drm_test_check_broadcast_rgb_limited_cea_mode(struct kunit *test)
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test);
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -619,7 +621,7 @@ static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *te
struct drm_crtc *crtc;
int ret;

- priv = drm_atomic_helper_connector_hdmi_init(test);
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -657,6 +659,138 @@ static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *te
KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
}

+/*
+ * Test that if we change the maximum bpc property to a different value,
+ * we trigger a mode change on the connector's CRTC, which will in turn
+ * disable/enable the connector.
+ */
+static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *old_conn_state;
+ struct drm_connector_state *new_conn_state;
+ struct drm_crtc_state *crtc_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test, 10);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ conn = &priv->connector;
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ new_conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+ old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+ new_conn_state->hdmi.output_bpc = 8;
+
+ KUNIT_ASSERT_NE(test,
+ old_conn_state->hdmi.output_bpc,
+ new_conn_state->hdmi.output_bpc);
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+ new_conn_state = drm_atomic_get_new_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+ KUNIT_ASSERT_NE(test,
+ old_conn_state->hdmi.output_bpc,
+ new_conn_state->hdmi.output_bpc);
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
+ KUNIT_EXPECT_TRUE(test, crtc_state->mode_changed);
+}
+
+/*
+ * Test that if we set the output bpc property to the same value, we
+ * don't trigger a mode change on the connector's CRTC and leave the
+ * connector unaffected.
+ */
+static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *old_conn_state;
+ struct drm_connector_state *new_conn_state;
+ struct drm_crtc_state *crtc_state;
+ struct drm_atomic_state *state;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test, 10);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ conn = &priv->connector;
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+ new_conn_state = drm_atomic_get_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+ old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+ KUNIT_ASSERT_EQ(test,
+ new_conn_state->hdmi.output_bpc,
+ old_conn_state->hdmi.output_bpc);
+
+ ret = drm_atomic_check_only(state);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+ new_conn_state = drm_atomic_get_new_connector_state(state, conn);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+ KUNIT_EXPECT_EQ(test,
+ old_conn_state->hdmi.output_bpc,
+ new_conn_state->hdmi.output_bpc);
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
+ KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
+}
+
static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
@@ -666,6 +800,8 @@ static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode_vic_1),
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
+ KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
+ KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
{ }
};

@@ -684,7 +820,7 @@ static void drm_test_check_broadcast_rgb_value(struct kunit *test)
struct drm_connector_state *conn_state;
struct drm_connector *conn;

- priv = drm_atomic_helper_connector_hdmi_init(test);
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
KUNIT_ASSERT_NOT_NULL(test, priv);

conn = &priv->connector;
@@ -692,8 +828,77 @@ static void drm_test_check_broadcast_rgb_value(struct kunit *test)
KUNIT_EXPECT_EQ(test, conn_state->hdmi.broadcast_rgb, DRM_HDMI_BROADCAST_RGB_AUTO);
}

+/*
+ * Test that if the connector was initialised with a maximum bpc of 8,
+ * the value of the max_bpc and max_requested_bpc properties out of
+ * reset are also set to 8, and output_bpc is set to 0 and will be
+ * filled at atomic_check time.
+ */
+static void drm_test_check_bpc_8_value(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_connector_state *conn_state;
+ struct drm_connector *conn;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ conn_state = conn->state;
+ KUNIT_EXPECT_EQ(test, conn_state->max_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->max_requested_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 0);
+}
+
+/*
+ * Test that if the connector was initialised with a maximum bpc of 10,
+ * the value of the max_bpc and max_requested_bpc properties out of
+ * reset are also set to 10, and output_bpc is set to 0 and will be
+ * filled at atomic_check time.
+ */
+static void drm_test_check_bpc_10_value(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_connector_state *conn_state;
+ struct drm_connector *conn;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test, 10);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ conn_state = conn->state;
+ KUNIT_EXPECT_EQ(test, conn_state->max_bpc, 10);
+ KUNIT_EXPECT_EQ(test, conn_state->max_requested_bpc, 10);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 0);
+}
+
+/*
+ * Test that if the connector was initialised with a maximum bpc of 12,
+ * the value of the max_bpc and max_requested_bpc properties out of
+ * reset are also set to 12, and output_bpc is set to 0 and will be
+ * filled at atomic_check time.
+ */
+static void drm_test_check_bpc_12_value(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_connector_state *conn_state;
+ struct drm_connector *conn;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test, 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ conn_state = conn->state;
+ KUNIT_EXPECT_EQ(test, conn_state->max_bpc, 12);
+ KUNIT_EXPECT_EQ(test, conn_state->max_requested_bpc, 12);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 0);
+}
+
static struct kunit_case drm_atomic_helper_connector_hdmi_reset_tests[] = {
KUNIT_CASE(drm_test_check_broadcast_rgb_value),
+ KUNIT_CASE(drm_test_check_bpc_8_value),
+ KUNIT_CASE(drm_test_check_bpc_10_value),
+ KUNIT_CASE(drm_test_check_bpc_12_value),
{ }
};

diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
index f3e6cc2b3b2d..232efb6fb235 100644
--- a/drivers/gpu/drm/tests/drm_connector_test.c
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -235,7 +235,8 @@ static void drm_test_connector_hdmi_init_valid(struct kunit *test)
ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
- &priv->ddc);
+ &priv->ddc,
+ 8);
KUNIT_EXPECT_EQ(test, ret, 0);
}

@@ -251,7 +252,8 @@ static void drm_test_connector_hdmi_init_null_ddc(struct kunit *test)
ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
- NULL);
+ NULL,
+ 8);
KUNIT_EXPECT_EQ(test, ret, 0);
}

@@ -266,7 +268,8 @@ static void drm_test_connector_hdmi_init_null_device(struct kunit *test)
ret = drmm_connector_hdmi_init(NULL, &priv->connector,
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
- &priv->ddc);
+ &priv->ddc,
+ 8);
KUNIT_EXPECT_LT(test, ret, 0);
}

@@ -281,7 +284,8 @@ static void drm_test_connector_hdmi_init_null_connector(struct kunit *test)
ret = drmm_connector_hdmi_init(&priv->drm, NULL,
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
- &priv->ddc);
+ &priv->ddc,
+ 8);
KUNIT_EXPECT_LT(test, ret, 0);
}

@@ -297,10 +301,144 @@ static void drm_test_connector_hdmi_init_null_funcs(struct kunit *test)
ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
NULL,
DRM_MODE_CONNECTOR_HDMIA,
- &priv->ddc);
+ &priv->ddc,
+ 8);
KUNIT_EXPECT_LT(test, ret, 0);
}

+/*
+ * Test that the registration of a connector with an invalid maximum bpc
+ * count fails.
+ */
+static void drm_test_connector_hdmi_init_bpc_invalid(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ 9);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector with a null maximum bpc
+ * count fails.
+ */
+static void drm_test_connector_hdmi_init_bpc_null(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ 0);
+ KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector with a maximum bpc count of
+ * 8 succeeds, registers the max bpc property, but doesn't register the
+ * HDR output metadata one.
+ */
+static void drm_test_connector_hdmi_init_bpc_8(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_property *prop;
+ uint64_t val;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ 8);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ prop = connector->max_bpc_property;
+ KUNIT_ASSERT_NOT_NULL(test, prop);
+ KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+
+ ret = drm_object_property_get_value(&connector->base, prop, &val);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+ KUNIT_EXPECT_EQ(test, val, 8);
+
+ prop = priv->drm.mode_config.hdr_output_metadata_property;
+ KUNIT_ASSERT_NOT_NULL(test, prop);
+ KUNIT_EXPECT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+}
+
+/*
+ * Test that the registration of a connector with a maximum bpc count of
+ * 10 succeeds and registers the max bpc and HDR output metadata
+ * properties.
+ */
+static void drm_test_connector_hdmi_init_bpc_10(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_property *prop;
+ uint64_t val;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ 10);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ prop = connector->max_bpc_property;
+ KUNIT_ASSERT_NOT_NULL(test, prop);
+ KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+
+ ret = drm_object_property_get_value(&connector->base, prop, &val);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+ KUNIT_EXPECT_EQ(test, val, 10);
+
+ prop = priv->drm.mode_config.hdr_output_metadata_property;
+ KUNIT_ASSERT_NOT_NULL(test, prop);
+ KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+}
+
+/*
+ * Test that the registration of a connector with a maximum bpc count of
+ * 12 succeeds and registers the max bpc and HDR output metadata
+ * properties.
+ */
+static void drm_test_connector_hdmi_init_bpc_12(struct kunit *test)
+{
+ struct drm_connector_init_priv *priv = test->priv;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_property *prop;
+ uint64_t val;
+ int ret;
+
+ ret = drmm_connector_hdmi_init(&priv->drm, connector,
+ &dummy_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ &priv->ddc,
+ 12);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ prop = connector->max_bpc_property;
+ KUNIT_ASSERT_NOT_NULL(test, prop);
+ KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+
+ ret = drm_object_property_get_value(&connector->base, prop, &val);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+ KUNIT_EXPECT_EQ(test, val, 12);
+
+ prop = priv->drm.mode_config.hdr_output_metadata_property;
+ KUNIT_ASSERT_NOT_NULL(test, prop);
+ KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+}
+
/*
* Test that the registration of an HDMI connector with an HDMI
* connector type succeeds.
@@ -314,7 +452,8 @@ static void drm_test_connector_hdmi_init_type_valid(struct kunit *test)
ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
connector_type,
- &priv->ddc);
+ &priv->ddc,
+ 8);
KUNIT_EXPECT_EQ(test, ret, 0);
}

@@ -345,7 +484,8 @@ static void drm_test_connector_hdmi_init_type_invalid(struct kunit *test)
ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
&dummy_funcs,
connector_type,
- &priv->ddc);
+ &priv->ddc,
+ 8);
KUNIT_EXPECT_LT(test, ret, 0);
}

@@ -377,6 +517,11 @@ KUNIT_ARRAY_PARAM(drm_connector_hdmi_init_type_invalid,

static struct kunit_case drmm_connector_hdmi_init_tests[] = {
KUNIT_CASE(drm_test_connector_hdmi_init_valid),
+ KUNIT_CASE(drm_test_connector_hdmi_init_bpc_8),
+ KUNIT_CASE(drm_test_connector_hdmi_init_bpc_10),
+ KUNIT_CASE(drm_test_connector_hdmi_init_bpc_12),
+ KUNIT_CASE(drm_test_connector_hdmi_init_bpc_invalid),
+ KUNIT_CASE(drm_test_connector_hdmi_init_bpc_null),
KUNIT_CASE(drm_test_connector_hdmi_init_null_connector),
KUNIT_CASE(drm_test_connector_hdmi_init_null_ddc),
KUNIT_CASE(drm_test_connector_hdmi_init_null_device),
@@ -545,7 +690,8 @@ static void drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector(
ret = drmm_connector_hdmi_init(&priv->drm, connector,
&dummy_funcs,
DRM_MODE_CONNECTOR_HDMIA,
- &priv->ddc);
+ &priv->ddc,
+ 8);
KUNIT_EXPECT_EQ(test, ret, 0);

ret = drm_connector_attach_broadcast_rgb_property(connector);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 76eecd449fb8..1b1b6aed04ee 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1072,6 +1072,11 @@ struct drm_connector_state {
* RGB Quantization Range or not?
*/
bool is_full_range;
+
+ /**
+ * @output_bpc: Bits per color channel to output.
+ */
+ unsigned int output_bpc;
} hdmi;
};

@@ -1717,6 +1722,11 @@ struct drm_connector {
*/
struct drm_property_blob *path_blob_ptr;

+ /**
+ * @max_bpc: Maximum bits per color channel the connector supports.
+ */
+ unsigned int max_bpc;
+
/**
* @max_bpc_property: Default connector property for the max bpc to be
* driven out of the connector.
@@ -1956,7 +1966,8 @@ int drmm_connector_hdmi_init(struct drm_device *dev,
struct drm_connector *connector,
const struct drm_connector_funcs *funcs,
int connector_type,
- struct i2c_adapter *ddc);
+ struct i2c_adapter *ddc,
+ unsigned int max_bpc);
void drm_connector_attach_edid_property(struct drm_connector *connector);
int drm_connector_register(struct drm_connector *connector);
void drm_connector_unregister(struct drm_connector *connector);

--
2.41.0

2023-11-28 11:45:41

by Johan Jonker

[permalink] [raw]
Subject: Re: [PATCH v4 38/45] drm/rockchip: inno_hdmi: Switch to infoframe type

Hi,

Maximum for inno_hdmi is: 1920x1080.

Do we still need INFOFRAME_VSI?

From Rockchip RK3036 TRM V1.0 20150907-Part2 Peripheral and Interface.pdf:

- HDMI 1.4a/b/1.3/1.2/1.1, HDCP 1.2 and DVI 1.0 standard compliant transmitter
- Supports all DTV resolutions including 480p/576p/720p/1080p

https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_edid.c#L7015

* HDMI spec says if a mode is found in HDMI 1.4b 4K modes
* we should send its VIC in vendor infoframes, else send the
* VIC in AVI infoframes. Lets check if this mode is present in
* HDMI 1.4b 4K modes https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_edid.c#L7212 * Note that there's is a need to send HDMI vendor infoframes only when using a
* 4k or stereoscopic 3D mode. So when giving any other mode as input this
* function will return -EINVAL, error that can be safely ignored.


On 11/28/23 11:24, Maxime Ripard wrote:
> The inno_hdmi driver relies on its own internal infoframe type matching
> the hardware.
>
> This works fine, but in order to make further reworks easier, let's
> switch to the HDMI spec definition of those types.
>
> Signed-off-by: Maxime Ripard <[email protected]>
> ---
> drivers/gpu/drm/rockchip/inno_hdmi.c | 71 +++++++++++++++++++++++-------------
> 1 file changed, 45 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
> index bc7fb1278cb2..ed1d10efbef4 100644
> --- a/drivers/gpu/drm/rockchip/inno_hdmi.c
> +++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
> @@ -156,61 +156,80 @@ static void inno_hdmi_reset(struct inno_hdmi *hdmi)
> inno_hdmi_set_pwr_mode(hdmi, NORMAL);
> }
>
> +static u32 inno_hdmi_get_frame_index(struct inno_hdmi *hdmi,
> + enum hdmi_infoframe_type type)
> +{
> + struct drm_device *drm = hdmi->connector.dev;
> +
> + switch (type) {
> + case HDMI_INFOFRAME_TYPE_VENDOR:
> + return INFOFRAME_VSI;
> + case HDMI_INFOFRAME_TYPE_AVI:
> + return INFOFRAME_AVI;
> + default:
> + drm_err(drm, "Unknown infoframe type: %u\n", type);
> + }
> +
> + return 0;
> +}
> +
> static u32 inno_hdmi_get_frame_mask(struct inno_hdmi *hdmi,
> - u32 frame_index)
> + enum hdmi_infoframe_type type)
> {
> struct drm_device *drm = hdmi->connector.dev;
>
> - switch (frame_index) {
> - case INFOFRAME_VSI:
> + switch (type) {
> + case HDMI_INFOFRAME_TYPE_VENDOR:
> return m_PACKET_VSI_EN;
> - case INFOFRAME_AVI:
> + case HDMI_INFOFRAME_TYPE_AVI:
> return 0;
> default:
> - drm_err(drm, "Unknown infoframe type: %u\n", frame_index);
> + drm_err(drm, "Unknown infoframe type: %u\n", type);
> }
>
> return 0;
> }
>
> static u32 inno_hdmi_get_frame_disable(struct inno_hdmi *hdmi,
> - u32 frame_index)
> + enum hdmi_infoframe_type type)
> {
> struct drm_device *drm = hdmi->connector.dev;
>
> - switch (frame_index) {
> - case INFOFRAME_VSI:
> + switch (type) {
> + case HDMI_INFOFRAME_TYPE_VENDOR:
> return v_PACKET_VSI_EN(0);
> - case INFOFRAME_AVI:
> + case HDMI_INFOFRAME_TYPE_AVI:
> return 0;
> default:
> - drm_err(drm, "Unknown infoframe type: %u\n", frame_index);
> + drm_err(drm, "Unknown infoframe type: %u\n", type);
> }
>
> return 0;
> }
>
> static u32 inno_hdmi_get_frame_enable(struct inno_hdmi *hdmi,
> - u32 frame_index)
> + enum hdmi_infoframe_type type)
> {
> struct drm_device *drm = hdmi->connector.dev;
>
> - switch (frame_index) {
> - case INFOFRAME_VSI:
> + switch (type) {
> + case HDMI_INFOFRAME_TYPE_VENDOR:
> return v_PACKET_VSI_EN(1);
> - case INFOFRAME_AVI:
> + case HDMI_INFOFRAME_TYPE_AVI:
> return 0;
> default:
> - drm_err(drm, "Unknown infoframe type: %u\n", frame_index);
> + drm_err(drm, "Unknown infoframe type: %u\n", type);
> }
>
> return 0;
> }
>
> -static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi, u32 frame_index)
> +static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi,
> + enum hdmi_infoframe_type type)
> {
> - u32 disable = inno_hdmi_get_frame_disable(hdmi, frame_index);
> - u32 mask = inno_hdmi_get_frame_mask(hdmi, frame_index);
> + u32 frame_index = inno_hdmi_get_frame_index(hdmi, type);
> + u32 disable = inno_hdmi_get_frame_disable(hdmi, type);
> + u32 mask = inno_hdmi_get_frame_mask(hdmi, type);
>
> if (mask)
> hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, disable);
> @@ -219,14 +238,14 @@ static void inno_hdmi_disable_frame(struct inno_hdmi *hdmi, u32 frame_index)
> }
>
> static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi,
> - union hdmi_infoframe *frame, u32 frame_index)
> + union hdmi_infoframe *frame, enum hdmi_infoframe_type type)
> {
> - u32 enable = inno_hdmi_get_frame_enable(hdmi, frame_index);
> - u32 mask = inno_hdmi_get_frame_mask(hdmi, frame_index);
> + u32 enable = inno_hdmi_get_frame_enable(hdmi, type);
> + u32 mask = inno_hdmi_get_frame_mask(hdmi, type);
> u8 packed_frame[HDMI_MAXIMUM_INFO_FRAME_SIZE];
> ssize_t rc, i;
>
> - inno_hdmi_disable_frame(hdmi, frame_index);
> + inno_hdmi_disable_frame(hdmi, type);
>
> rc = hdmi_infoframe_pack(frame, packed_frame,
> sizeof(packed_frame));
> @@ -253,11 +272,11 @@ static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi,
> &hdmi->connector,
> mode);
> if (rc) {
> - inno_hdmi_disable_frame(hdmi, INFOFRAME_VSI);
> + inno_hdmi_disable_frame(hdmi, HDMI_INFOFRAME_TYPE_VENDOR);
> return rc;
> }
>
> - return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_VSI);
> + return inno_hdmi_upload_frame(hdmi, &frame, HDMI_INFOFRAME_TYPE_VENDOR);
> }
>
> static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
> @@ -270,13 +289,13 @@ static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
> &hdmi->connector,
> mode);
> if (rc) {
> - inno_hdmi_disable_frame(hdmi, INFOFRAME_AVI);
> + inno_hdmi_disable_frame(hdmi, HDMI_INFOFRAME_TYPE_AVI);
> return rc;
> }
>
> frame.avi.colorspace = HDMI_COLORSPACE_RGB;
>
> - return inno_hdmi_upload_frame(hdmi, &frame, INFOFRAME_AVI);
> + return inno_hdmi_upload_frame(hdmi, &frame, HDMI_INFOFRAME_TYPE_AVI);
> }
>
> static int inno_hdmi_config_video_csc(struct inno_hdmi *hdmi)
>

2023-11-28 12:54:30

by Jani Nikula

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
> All the drm_connector_init variants take at least a pointer to the
> device, connector and hooks implementation.
>
> However, none of them check their value before dereferencing those
> pointers which can lead to a NULL-pointer dereference if the author
> isn't careful.

Arguably oopsing on the spot is preferrable when this can't be caused by
user input. It's always a mistake that should be caught early during
development.

Not everyone checks the return value of drm_connector_init and friends,
so those cases will lead to more mysterious bugs later. And probably
oopses as well.


BR,
Jani.


>
> Let's test those pointers instead and error out if any is NULL.
>
> Signed-off-by: Maxime Ripard <[email protected]>
> ---
> drivers/gpu/drm/drm_connector.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index b0516505f7ae..2f60755dccdd 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -229,6 +229,9 @@ static int __drm_connector_init(struct drm_device *dev,
> struct ida *connector_ida =
> &drm_connector_enum_list[connector_type].ida;
>
> + if (!dev || !connector || !funcs)
> + return -EINVAL;
> +
> WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
> (!funcs->atomic_destroy_state ||
> !funcs->atomic_duplicate_state));

--
Jani Nikula, Intel

2023-11-28 13:29:55

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

Hi Jani,

On Tue, Nov 28, 2023 at 02:54:02PM +0200, Jani Nikula wrote:
> On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
> > All the drm_connector_init variants take at least a pointer to the
> > device, connector and hooks implementation.
> >
> > However, none of them check their value before dereferencing those
> > pointers which can lead to a NULL-pointer dereference if the author
> > isn't careful.
>
> Arguably oopsing on the spot is preferrable when this can't be caused by
> user input. It's always a mistake that should be caught early during
> development.
>
> Not everyone checks the return value of drm_connector_init and friends,
> so those cases will lead to more mysterious bugs later. And probably
> oopses as well.

So maybe we can do both then, with something like

if (WARN_ON(!dev))
return -EINVAL

if (drm_WARN_ON(dev, !connector || !funcs))
return -EINVAL;

I'd still like to check for this, so we can have proper testing, and we
already check for those pointers in some places (like funcs in
drm_connector_init), so if we don't cover everything we're inconsistent.

Maxime


Attachments:
(No filename) (1.13 kB)
signature.asc (235.00 B)
Download all attachments

2023-11-28 13:53:03

by Ville Syrjälä

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Tue, Nov 28, 2023 at 02:29:40PM +0100, Maxime Ripard wrote:
> Hi Jani,
>
> On Tue, Nov 28, 2023 at 02:54:02PM +0200, Jani Nikula wrote:
> > On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
> > > All the drm_connector_init variants take at least a pointer to the
> > > device, connector and hooks implementation.
> > >
> > > However, none of them check their value before dereferencing those
> > > pointers which can lead to a NULL-pointer dereference if the author
> > > isn't careful.
> >
> > Arguably oopsing on the spot is preferrable when this can't be caused by
> > user input. It's always a mistake that should be caught early during
> > development.
> >
> > Not everyone checks the return value of drm_connector_init and friends,
> > so those cases will lead to more mysterious bugs later. And probably
> > oopses as well.
>
> So maybe we can do both then, with something like
>
> if (WARN_ON(!dev))
> return -EINVAL
>
> if (drm_WARN_ON(dev, !connector || !funcs))
> return -EINVAL;
>
> I'd still like to check for this, so we can have proper testing, and we
> already check for those pointers in some places (like funcs in
> drm_connector_init), so if we don't cover everything we're inconsistent.

People will invariably cargo-cult this kind of stuff absolutely
everywhere and then all your functions will have tons of dead
code to check their arguments. I'd prefer not to go there
usually.

Should we perhaps start to use the (arguably hideous)
- void f(struct foo *bar)
+ void f(struct foo bar[static 1])
syntax to tell the compiler we don't accept NULL pointers?

Hmm. Apparently that has the same problem as using any
other kind of array syntax in the prototype. That is,
the compiler demands to know the definition of 'struct foo'
even though we're passing in effectively a pointer. Sigh.

--
Ville Syrj?l?
Intel

2023-11-28 14:12:47

by Sui Jingfeng

[permalink] [raw]
Subject: Re: [v4,43/45] drm/sun4i: hdmi: Switch to container_of_const

Hi,


On 2023/11/28 18:24, Maxime Ripard wrote:
> container_of_const() allows to preserve the pointer constness and is
> thus more flexible than inline functions.
>
> Let's switch all our instances of container_of() to container_of_const().
>
> Signed-off-by: Maxime Ripard <[email protected]>


LGTM,

Reviewed-by: Sui Jingfeng <[email protected]>


> ---
> drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 16 ++++------------
> 1 file changed, 4 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> index bae69d696765..c276d984da6b 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> @@ -30,19 +30,11 @@
> #include "sun4i_drv.h"
> #include "sun4i_hdmi.h"
>
> -static inline struct sun4i_hdmi *
> -drm_encoder_to_sun4i_hdmi(struct drm_encoder *encoder)
> -{
> - return container_of(encoder, struct sun4i_hdmi,
> - encoder);
> -}
> +#define drm_encoder_to_sun4i_hdmi(e) \
> + container_of_const(e, struct sun4i_hdmi, encoder)
>
> -static inline struct sun4i_hdmi *
> -drm_connector_to_sun4i_hdmi(struct drm_connector *connector)
> -{
> - return container_of(connector, struct sun4i_hdmi,
> - connector);
> -}
> +#define drm_connector_to_sun4i_hdmi(c) \
> + container_of_const(c, struct sun4i_hdmi, connector)
>
> static int sun4i_hdmi_setup_avi_infoframes(struct sun4i_hdmi *hdmi,
> struct drm_display_mode *mode)

2023-11-28 14:59:10

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH v4 03/45] drm/tests: Add helper to create mock plane

Hi Maxime,

kernel test robot noticed the following build warnings:

[auto build test WARNING on drm-misc/drm-misc-next]
[also build test WARNING on sunxi/sunxi/for-next drm/drm-next linus/master v6.7-rc3 next-20231128]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url: https://github.com/intel-lab-lkp/linux/commits/Maxime-Ripard/drm-tests-helpers-Add-atomic-helpers/20231128-193409
base: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
patch link: https://lore.kernel.org/r/20231128-kms-hdmi-connector-state-v4-3-c7602158306e%40kernel.org
patch subject: [PATCH v4 03/45] drm/tests: Add helper to create mock plane
config: i386-buildonly-randconfig-002-20231128 (https://download.01.org/0day-ci/archive/20231128/[email protected]/config)
compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231128/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

>> drivers/gpu/drm/tests/drm_kunit_helpers.c:290: warning: Function parameter or member 'num_formats' not described in 'drm_kunit_helper_create_primary_plane'
>> drivers/gpu/drm/tests/drm_kunit_helpers.c:290: warning: Excess function parameter 'format_count' description in 'drm_kunit_helper_create_primary_plane'


vim +290 drivers/gpu/drm/tests/drm_kunit_helpers.c

257
258 /**
259 * drm_kunit_helper_create_primary_plane - Creates a mock primary plane for a KUnit test
260 * @test: The test context object
261 * @drm: The device to alloc the plane for
262 * @funcs: Callbacks for the new plane. Optional.
263 * @helper_funcs: Helpers callbacks for the new plane. Optional.
264 * @formats: array of supported formats (DRM_FORMAT\_\*). Optional.
265 * @format_count: number of elements in @formats
266 * @modifiers: array of struct drm_format modifiers terminated by
267 * DRM_FORMAT_MOD_INVALID. Optional.
268 *
269 * This allocates and initializes a mock struct &drm_plane meant to be
270 * part of a mock device for a KUnit test.
271 *
272 * Resources will be cleaned up automatically.
273 *
274 * @funcs will default to the default helpers implementations.
275 * @helper_funcs will default to an empty implementation. @formats will
276 * default to XRGB8888 only. @modifiers will default to a linear
277 * modifier only.
278 *
279 * Returns:
280 * A pointer to the new plane, or an ERR_PTR() otherwise.
281 */
282 struct drm_plane *
283 drm_kunit_helper_create_primary_plane(struct kunit *test,
284 struct drm_device *drm,
285 const struct drm_plane_funcs *funcs,
286 const struct drm_plane_helper_funcs *helper_funcs,
287 const uint32_t *formats,
288 unsigned int num_formats,
289 const uint64_t *modifiers)
> 290 {
291 struct drm_plane *plane;
292
293 if (!funcs)
294 funcs = &default_plane_funcs;
295
296 if (!helper_funcs)
297 helper_funcs = &default_plane_helper_funcs;
298
299 if (!formats || !num_formats) {
300 formats = default_plane_formats;
301 num_formats = ARRAY_SIZE(default_plane_formats);
302 }
303
304 if (!modifiers)
305 modifiers = default_plane_modifiers;
306
307 plane = __drmm_universal_plane_alloc(drm,
308 sizeof(struct drm_plane), 0,
309 0,
310 funcs,
311 formats,
312 num_formats,
313 default_plane_modifiers,
314 DRM_PLANE_TYPE_PRIMARY,
315 NULL);
316 KUNIT_ASSERT_NOT_ERR_OR_NULL(test, plane);
317
318 drm_plane_helper_add(plane, helper_funcs);
319
320 return plane;
321 }
322 EXPORT_SYMBOL_GPL(drm_kunit_helper_create_primary_plane);
323

--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

2023-11-29 09:11:47

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

Hi Ville,

On Tue, Nov 28, 2023 at 03:49:08PM +0200, Ville Syrj?l? wrote:
> On Tue, Nov 28, 2023 at 02:29:40PM +0100, Maxime Ripard wrote:
> > On Tue, Nov 28, 2023 at 02:54:02PM +0200, Jani Nikula wrote:
> > > On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
> > > > All the drm_connector_init variants take at least a pointer to the
> > > > device, connector and hooks implementation.
> > > >
> > > > However, none of them check their value before dereferencing those
> > > > pointers which can lead to a NULL-pointer dereference if the author
> > > > isn't careful.
> > >
> > > Arguably oopsing on the spot is preferrable when this can't be caused by
> > > user input. It's always a mistake that should be caught early during
> > > development.
> > >
> > > Not everyone checks the return value of drm_connector_init and friends,
> > > so those cases will lead to more mysterious bugs later. And probably
> > > oopses as well.
> >
> > So maybe we can do both then, with something like
> >
> > if (WARN_ON(!dev))
> > return -EINVAL
> >
> > if (drm_WARN_ON(dev, !connector || !funcs))
> > return -EINVAL;
> >
> > I'd still like to check for this, so we can have proper testing, and we
> > already check for those pointers in some places (like funcs in
> > drm_connector_init), so if we don't cover everything we're inconsistent.
>
> People will invariably cargo-cult this kind of stuff absolutely
> everywhere and then all your functions will have tons of dead
> code to check their arguments.

And that's a bad thing because... ?

Also, are you really saying that checking that your arguments make sense
is cargo-cult?

We're already doing it in some parts of KMS, so we have to be
consistent, and the answer to "most drivers don't check the error"
cannot be "let's just give on error checking then".

> I'd prefer not to go there usually.
>
> Should we perhaps start to use the (arguably hideous)
> - void f(struct foo *bar)
> + void f(struct foo bar[static 1])
> syntax to tell the compiler we don't accept NULL pointers?
>
> Hmm. Apparently that has the same problem as using any
> other kind of array syntax in the prototype. That is,
> the compiler demands to know the definition of 'struct foo'
> even though we're passing in effectively a pointer. Sigh.

Honestly, I don't care as long as it's something we can unit-test to
make sure we make it consistent. We can't unit test a complete kernel
crash.


Attachments:
(No filename) (2.44 kB)
signature.asc (235.00 B)
Download all attachments

2023-11-29 09:19:00

by Ville Syrjälä

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Wed, Nov 29, 2023 at 10:11:26AM +0100, Maxime Ripard wrote:
> Hi Ville,
>
> On Tue, Nov 28, 2023 at 03:49:08PM +0200, Ville Syrj?l? wrote:
> > On Tue, Nov 28, 2023 at 02:29:40PM +0100, Maxime Ripard wrote:
> > > On Tue, Nov 28, 2023 at 02:54:02PM +0200, Jani Nikula wrote:
> > > > On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
> > > > > All the drm_connector_init variants take at least a pointer to the
> > > > > device, connector and hooks implementation.
> > > > >
> > > > > However, none of them check their value before dereferencing those
> > > > > pointers which can lead to a NULL-pointer dereference if the author
> > > > > isn't careful.
> > > >
> > > > Arguably oopsing on the spot is preferrable when this can't be caused by
> > > > user input. It's always a mistake that should be caught early during
> > > > development.
> > > >
> > > > Not everyone checks the return value of drm_connector_init and friends,
> > > > so those cases will lead to more mysterious bugs later. And probably
> > > > oopses as well.
> > >
> > > So maybe we can do both then, with something like
> > >
> > > if (WARN_ON(!dev))
> > > return -EINVAL
> > >
> > > if (drm_WARN_ON(dev, !connector || !funcs))
> > > return -EINVAL;
> > >
> > > I'd still like to check for this, so we can have proper testing, and we
> > > already check for those pointers in some places (like funcs in
> > > drm_connector_init), so if we don't cover everything we're inconsistent.
> >
> > People will invariably cargo-cult this kind of stuff absolutely
> > everywhere and then all your functions will have tons of dead
> > code to check their arguments.
>
> And that's a bad thing because... ?
>
> Also, are you really saying that checking that your arguments make sense
> is cargo-cult?
>
> We're already doing it in some parts of KMS, so we have to be
> consistent, and the answer to "most drivers don't check the error"
> cannot be "let's just give on error checking then".
>
> > I'd prefer not to go there usually.
> >
> > Should we perhaps start to use the (arguably hideous)
> > - void f(struct foo *bar)
> > + void f(struct foo bar[static 1])
> > syntax to tell the compiler we don't accept NULL pointers?
> >
> > Hmm. Apparently that has the same problem as using any
> > other kind of array syntax in the prototype. That is,
> > the compiler demands to know the definition of 'struct foo'
> > even though we're passing in effectively a pointer. Sigh.
>
> Honestly, I don't care as long as it's something we can unit-test to
> make sure we make it consistent. We can't unit test a complete kernel
> crash.

Why do you want to put utterly broken code into a unit test?

--
Ville Syrj?l?
Intel

2023-11-29 09:39:10

by Jani Nikula

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Wed, 29 Nov 2023, Maxime Ripard <[email protected]> wrote:
> Hi Ville,
>
> On Tue, Nov 28, 2023 at 03:49:08PM +0200, Ville Syrjälä wrote:
>> On Tue, Nov 28, 2023 at 02:29:40PM +0100, Maxime Ripard wrote:
>> > On Tue, Nov 28, 2023 at 02:54:02PM +0200, Jani Nikula wrote:
>> > > On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
>> > > > All the drm_connector_init variants take at least a pointer to the
>> > > > device, connector and hooks implementation.
>> > > >
>> > > > However, none of them check their value before dereferencing those
>> > > > pointers which can lead to a NULL-pointer dereference if the author
>> > > > isn't careful.
>> > >
>> > > Arguably oopsing on the spot is preferrable when this can't be caused by
>> > > user input. It's always a mistake that should be caught early during
>> > > development.
>> > >
>> > > Not everyone checks the return value of drm_connector_init and friends,
>> > > so those cases will lead to more mysterious bugs later. And probably
>> > > oopses as well.
>> >
>> > So maybe we can do both then, with something like
>> >
>> > if (WARN_ON(!dev))
>> > return -EINVAL
>> >
>> > if (drm_WARN_ON(dev, !connector || !funcs))
>> > return -EINVAL;
>> >
>> > I'd still like to check for this, so we can have proper testing, and we
>> > already check for those pointers in some places (like funcs in
>> > drm_connector_init), so if we don't cover everything we're inconsistent.
>>
>> People will invariably cargo-cult this kind of stuff absolutely
>> everywhere and then all your functions will have tons of dead
>> code to check their arguments.
>
> And that's a bad thing because... ?
>
> Also, are you really saying that checking that your arguments make sense
> is cargo-cult?

It's a powerful thing to be able to assume a NULL argument is always a
fatal programming error on the caller's side, and should oops and get
caught immediately. It's an assertion.

We're not talking about user input or anything like that here.

If you start checking for things that can't happen, and return errors
for them, you start gracefully handling things that don't have anything
graceful about them.

Having such checks in place trains people to think they *may* happen.

While it should fail fast and loud at the developer's first smoke test,
and get fixed then and there.


BR,
Jani.


>
> We're already doing it in some parts of KMS, so we have to be
> consistent, and the answer to "most drivers don't check the error"
> cannot be "let's just give on error checking then".
>
>> I'd prefer not to go there usually.
>>
>> Should we perhaps start to use the (arguably hideous)
>> - void f(struct foo *bar)
>> + void f(struct foo bar[static 1])
>> syntax to tell the compiler we don't accept NULL pointers?
>>
>> Hmm. Apparently that has the same problem as using any
>> other kind of array syntax in the prototype. That is,
>> the compiler demands to know the definition of 'struct foo'
>> even though we're passing in effectively a pointer. Sigh.
>
> Honestly, I don't care as long as it's something we can unit-test to
> make sure we make it consistent. We can't unit test a complete kernel
> crash.

--
Jani Nikula, Intel

2023-11-29 10:13:42

by Pekka Paalanen

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Tue, 28 Nov 2023 15:49:08 +0200
Ville Syrjälä <[email protected]> wrote:

> Should we perhaps start to use the (arguably hideous)
> - void f(struct foo *bar)
> + void f(struct foo bar[static 1])
> syntax to tell the compiler we don't accept NULL pointers?
>
> Hmm. Apparently that has the same problem as using any
> other kind of array syntax in the prototype. That is,
> the compiler demands to know the definition of 'struct foo'
> even though we're passing in effectively a pointer. Sigh.


__attribute__((nonnull)) ?


Thanks,
pq


Attachments:
(No filename) (849.00 B)
OpenPGP digital signature

2023-11-29 10:27:06

by Ville Syrjälä

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Wed, Nov 29, 2023 at 12:12:59PM +0200, Pekka Paalanen wrote:
> On Tue, 28 Nov 2023 15:49:08 +0200
> Ville Syrj?l? <[email protected]> wrote:
>
> > Should we perhaps start to use the (arguably hideous)
> > - void f(struct foo *bar)
> > + void f(struct foo bar[static 1])
> > syntax to tell the compiler we don't accept NULL pointers?
> >
> > Hmm. Apparently that has the same problem as using any
> > other kind of array syntax in the prototype. That is,
> > the compiler demands to know the definition of 'struct foo'
> > even though we're passing in effectively a pointer. Sigh.
>
>
> __attribute__((nonnull)) ?

I guess that would work, though the syntax is horrible when
you need to flag specific arguments.

--
Ville Syrj?l?
Intel

2023-11-29 11:14:30

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Wed, Nov 29, 2023 at 11:38:42AM +0200, Jani Nikula wrote:
> On Wed, 29 Nov 2023, Maxime Ripard <[email protected]> wrote:
> > Hi Ville,
> >
> > On Tue, Nov 28, 2023 at 03:49:08PM +0200, Ville Syrj?l? wrote:
> >> On Tue, Nov 28, 2023 at 02:29:40PM +0100, Maxime Ripard wrote:
> >> > On Tue, Nov 28, 2023 at 02:54:02PM +0200, Jani Nikula wrote:
> >> > > On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
> >> > > > All the drm_connector_init variants take at least a pointer to the
> >> > > > device, connector and hooks implementation.
> >> > > >
> >> > > > However, none of them check their value before dereferencing those
> >> > > > pointers which can lead to a NULL-pointer dereference if the author
> >> > > > isn't careful.
> >> > >
> >> > > Arguably oopsing on the spot is preferrable when this can't be caused by
> >> > > user input. It's always a mistake that should be caught early during
> >> > > development.
> >> > >
> >> > > Not everyone checks the return value of drm_connector_init and friends,
> >> > > so those cases will lead to more mysterious bugs later. And probably
> >> > > oopses as well.
> >> >
> >> > So maybe we can do both then, with something like
> >> >
> >> > if (WARN_ON(!dev))
> >> > return -EINVAL
> >> >
> >> > if (drm_WARN_ON(dev, !connector || !funcs))
> >> > return -EINVAL;
> >> >
> >> > I'd still like to check for this, so we can have proper testing, and we
> >> > already check for those pointers in some places (like funcs in
> >> > drm_connector_init), so if we don't cover everything we're inconsistent.
> >>
> >> People will invariably cargo-cult this kind of stuff absolutely
> >> everywhere and then all your functions will have tons of dead
> >> code to check their arguments.
> >
> > And that's a bad thing because... ?
> >
> > Also, are you really saying that checking that your arguments make sense
> > is cargo-cult?
>
> It's a powerful thing to be able to assume a NULL argument is always a
> fatal programming error on the caller's side, and should oops and get
> caught immediately. It's an assertion.

Yeah, but we're not really doing that either. We have no explicit
assertion anywhere. We take a pointer in, and just hope that it will be
dereferenced later on and that the kernel will crash. The pointer to the
functions especially is only deferenced very later on.

And assertions might be powerful, but being able to notice errors and
debug them is too. A panic takes away basically any remote access to
debug. If you don't have a console, you're done.

> We're not talking about user input or anything like that here.
>
> If you start checking for things that can't happen, and return errors
> for them, you start gracefully handling things that don't have anything
> graceful about them.

But there's nothing graceful to do here: you just return from your probe
function that you couldn't probe and that's it. Just like you do when
you can't map your registers, or get your interrupt, or register into
any framework (including drm_dev_register that pretty much every driver
handles properly if it returns an error, without being graceful about
it).

> Having such checks in place trains people to think they *may* happen.

In most cases, kmalloc can't fail. We seem to have a very different
policy towards it.

> While it should fail fast and loud at the developer's first smoke test,
> and get fixed then and there.

Returning an error + a warning also qualifies for "fail fast and loud".
But keeps the system alive for someone to notice in any case.

Maxime


Attachments:
(No filename) (3.55 kB)
signature.asc (235.00 B)
Download all attachments

2023-11-29 11:41:56

by Jani Nikula

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Wed, 29 Nov 2023, Maxime Ripard <[email protected]> wrote:
> On Wed, Nov 29, 2023 at 11:38:42AM +0200, Jani Nikula wrote:
>> On Wed, 29 Nov 2023, Maxime Ripard <[email protected]> wrote:
>> > Hi Ville,
>> >
>> > On Tue, Nov 28, 2023 at 03:49:08PM +0200, Ville Syrjälä wrote:
>> >> On Tue, Nov 28, 2023 at 02:29:40PM +0100, Maxime Ripard wrote:
>> >> > On Tue, Nov 28, 2023 at 02:54:02PM +0200, Jani Nikula wrote:
>> >> > > On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
>> >> > > > All the drm_connector_init variants take at least a pointer to the
>> >> > > > device, connector and hooks implementation.
>> >> > > >
>> >> > > > However, none of them check their value before dereferencing those
>> >> > > > pointers which can lead to a NULL-pointer dereference if the author
>> >> > > > isn't careful.
>> >> > >
>> >> > > Arguably oopsing on the spot is preferrable when this can't be caused by
>> >> > > user input. It's always a mistake that should be caught early during
>> >> > > development.
>> >> > >
>> >> > > Not everyone checks the return value of drm_connector_init and friends,
>> >> > > so those cases will lead to more mysterious bugs later. And probably
>> >> > > oopses as well.
>> >> >
>> >> > So maybe we can do both then, with something like
>> >> >
>> >> > if (WARN_ON(!dev))
>> >> > return -EINVAL
>> >> >
>> >> > if (drm_WARN_ON(dev, !connector || !funcs))
>> >> > return -EINVAL;
>> >> >
>> >> > I'd still like to check for this, so we can have proper testing, and we
>> >> > already check for those pointers in some places (like funcs in
>> >> > drm_connector_init), so if we don't cover everything we're inconsistent.
>> >>
>> >> People will invariably cargo-cult this kind of stuff absolutely
>> >> everywhere and then all your functions will have tons of dead
>> >> code to check their arguments.
>> >
>> > And that's a bad thing because... ?
>> >
>> > Also, are you really saying that checking that your arguments make sense
>> > is cargo-cult?
>>
>> It's a powerful thing to be able to assume a NULL argument is always a
>> fatal programming error on the caller's side, and should oops and get
>> caught immediately. It's an assertion.
>
> Yeah, but we're not really doing that either. We have no explicit
> assertion anywhere. We take a pointer in, and just hope that it will be
> dereferenced later on and that the kernel will crash. The pointer to the
> functions especially is only deferenced very later on.
>
> And assertions might be powerful, but being able to notice errors and
> debug them is too. A panic takes away basically any remote access to
> debug. If you don't have a console, you're done.
>
>> We're not talking about user input or anything like that here.
>>
>> If you start checking for things that can't happen, and return errors
>> for them, you start gracefully handling things that don't have anything
>> graceful about them.
>
> But there's nothing graceful to do here: you just return from your probe
> function that you couldn't probe and that's it. Just like you do when
> you can't map your registers, or get your interrupt, or register into
> any framework (including drm_dev_register that pretty much every driver
> handles properly if it returns an error, without being graceful about
> it).

Those are all dynamic things that can fail.

Quite different from passing NULL dev, connector, or funcs to
drm_connector_init() and friends.

I think it's wrong to set the example that everything needs to be
checked, everything needs to return an error, every call needs to check
for error return, all the time, everywhere. People absolutely will cargo
cult that, and that's what Ville is referring to.

If you pass NULL dev, connector, or funcs to drm_connector_init() I
think you absolutely deserve to get an oops.

For dev, you could possibly not have reached the function with NULL
dev. (And __drm_connector_init() has dev->mode_config before the check,
so you'll get a static analyzer warning about dereference before the
check.) If you have NULL connector, you didn't check for allocation
failure earlier. If you have NULL funcs, you just passed NULL, because
it's generally supposed to be a pointer to a static const struct.

>> Having such checks in place trains people to think they *may* happen.
>
> In most cases, kmalloc can't fail. We seem to have a very different
> policy towards it.

Again, dynamic in nature and can fail.

>> While it should fail fast and loud at the developer's first smoke test,
>> and get fixed then and there.
>
> Returning an error + a warning also qualifies for "fail fast and loud".
> But keeps the system alive for someone to notice in any case.

But where do you draw the line? If we keep adding these checks to things
that actually can't happen, we teach developers we need to check for
impossible things. And we teach them not to trust anything.

I scroll down the file and reach
drm_connector_attach_edid_property(). Should we NULL check connector?
Should we change the function to int and return a value? Should the
caller check the value? Then there's drm_connector_attach_encoder(). And
drm_connector_has_possible_encoder(). And so on and so forth.

Where do you draw the line?


BR,
Jani.


--
Jani Nikula, Intel

2023-12-01 09:02:32

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Wed, Nov 29, 2023 at 11:18:24AM +0200, Ville Syrj?l? wrote:
> On Wed, Nov 29, 2023 at 10:11:26AM +0100, Maxime Ripard wrote:
> > Hi Ville,
> >
> > On Tue, Nov 28, 2023 at 03:49:08PM +0200, Ville Syrj?l? wrote:
> > > On Tue, Nov 28, 2023 at 02:29:40PM +0100, Maxime Ripard wrote:
> > > > On Tue, Nov 28, 2023 at 02:54:02PM +0200, Jani Nikula wrote:
> > > > > On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
> > > > > > All the drm_connector_init variants take at least a pointer to the
> > > > > > device, connector and hooks implementation.
> > > > > >
> > > > > > However, none of them check their value before dereferencing those
> > > > > > pointers which can lead to a NULL-pointer dereference if the author
> > > > > > isn't careful.
> > > > >
> > > > > Arguably oopsing on the spot is preferrable when this can't be caused by
> > > > > user input. It's always a mistake that should be caught early during
> > > > > development.
> > > > >
> > > > > Not everyone checks the return value of drm_connector_init and friends,
> > > > > so those cases will lead to more mysterious bugs later. And probably
> > > > > oopses as well.
> > > >
> > > > So maybe we can do both then, with something like
> > > >
> > > > if (WARN_ON(!dev))
> > > > return -EINVAL
> > > >
> > > > if (drm_WARN_ON(dev, !connector || !funcs))
> > > > return -EINVAL;
> > > >
> > > > I'd still like to check for this, so we can have proper testing, and we
> > > > already check for those pointers in some places (like funcs in
> > > > drm_connector_init), so if we don't cover everything we're inconsistent.
> > >
> > > People will invariably cargo-cult this kind of stuff absolutely
> > > everywhere and then all your functions will have tons of dead
> > > code to check their arguments.
> >
> > And that's a bad thing because... ?
> >
> > Also, are you really saying that checking that your arguments make sense
> > is cargo-cult?
> >
> > We're already doing it in some parts of KMS, so we have to be
> > consistent, and the answer to "most drivers don't check the error"
> > cannot be "let's just give on error checking then".
> >
> > > I'd prefer not to go there usually.
> > >
> > > Should we perhaps start to use the (arguably hideous)
> > > - void f(struct foo *bar)
> > > + void f(struct foo bar[static 1])
> > > syntax to tell the compiler we don't accept NULL pointers?
> > >
> > > Hmm. Apparently that has the same problem as using any
> > > other kind of array syntax in the prototype. That is,
> > > the compiler demands to know the definition of 'struct foo'
> > > even though we're passing in effectively a pointer. Sigh.
> >
> > Honestly, I don't care as long as it's something we can unit-test to
> > make sure we make it consistent. We can't unit test a complete kernel
> > crash.
>
> Why do you want to put utterly broken code into a unit test?

Utterly broken code happens. It probably shouldn't, but here we are.

Anyway, you mostly missed the consistent part.

The current state with it is:

- planes:
- drm_universal_plane_init warns if funcs->destroy NULL
- drm_universal_plane_alloc errors out if funcs is NULL
- drmm_universal_plane_alloc warns and errors out if funcs or funcs->destroy are NULL

- CRTC:
- drm_crtc_init_with_planes warns if funcs->destroy NULL
- drmm_crtc_init_with_planes warns if funcs or funcs->destroy are NULL
- drmm_crtc_alloc_with_planes warns and errors out if funcs or funcs->destroy are NULL

- encoder:
- drm_encoder_init warns if funcs->destroy NULL
- drmm_encoder_init warns and errors out if funcs or funcs->destroy are NULL
- drmm_encoder_alloc warns and errors out if funcs or funcs->destroy are NULL

- connectors:
- drm_connector_init warns and errors out if funcs or funcs->destroy are NULL
- drm_connector_init_with_ddc warns and errors out if funcs or funcs->destroy are NULL
- drmm_connector_init warns and errors out if funcs or funcs->destroy are NULL

I think that just proves that your opinion is just not as clear cut as
you'd like it to be, and it's far from being the policy you claim it is.

Plus, we're not even remotely consistent there, and we're not
documenting that anywhere.

And we have plenty of other examples of static stuff being checked
because it just makes sense. All variants of drm_crtc_init_with_planes
will for example check that the correct plane type is associated to the
primary and cursor planes.

We should fix that.

Maxime


Attachments:
(No filename) (4.49 kB)
signature.asc (235.00 B)
Download all attachments

2023-12-01 15:16:43

by Ville Syrjälä

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Fri, Dec 01, 2023 at 10:01:49AM +0100, Maxime Ripard wrote:
> On Wed, Nov 29, 2023 at 11:18:24AM +0200, Ville Syrj?l? wrote:
> > On Wed, Nov 29, 2023 at 10:11:26AM +0100, Maxime Ripard wrote:
> > > Hi Ville,
> > >
> > > On Tue, Nov 28, 2023 at 03:49:08PM +0200, Ville Syrj?l? wrote:
> > > > On Tue, Nov 28, 2023 at 02:29:40PM +0100, Maxime Ripard wrote:
> > > > > On Tue, Nov 28, 2023 at 02:54:02PM +0200, Jani Nikula wrote:
> > > > > > On Tue, 28 Nov 2023, Maxime Ripard <[email protected]> wrote:
> > > > > > > All the drm_connector_init variants take at least a pointer to the
> > > > > > > device, connector and hooks implementation.
> > > > > > >
> > > > > > > However, none of them check their value before dereferencing those
> > > > > > > pointers which can lead to a NULL-pointer dereference if the author
> > > > > > > isn't careful.
> > > > > >
> > > > > > Arguably oopsing on the spot is preferrable when this can't be caused by
> > > > > > user input. It's always a mistake that should be caught early during
> > > > > > development.
> > > > > >
> > > > > > Not everyone checks the return value of drm_connector_init and friends,
> > > > > > so those cases will lead to more mysterious bugs later. And probably
> > > > > > oopses as well.
> > > > >
> > > > > So maybe we can do both then, with something like
> > > > >
> > > > > if (WARN_ON(!dev))
> > > > > return -EINVAL
> > > > >
> > > > > if (drm_WARN_ON(dev, !connector || !funcs))
> > > > > return -EINVAL;
> > > > >
> > > > > I'd still like to check for this, so we can have proper testing, and we
> > > > > already check for those pointers in some places (like funcs in
> > > > > drm_connector_init), so if we don't cover everything we're inconsistent.
> > > >
> > > > People will invariably cargo-cult this kind of stuff absolutely
> > > > everywhere and then all your functions will have tons of dead
> > > > code to check their arguments.
> > >
> > > And that's a bad thing because... ?
> > >
> > > Also, are you really saying that checking that your arguments make sense
> > > is cargo-cult?
> > >
> > > We're already doing it in some parts of KMS, so we have to be
> > > consistent, and the answer to "most drivers don't check the error"
> > > cannot be "let's just give on error checking then".
> > >
> > > > I'd prefer not to go there usually.
> > > >
> > > > Should we perhaps start to use the (arguably hideous)
> > > > - void f(struct foo *bar)
> > > > + void f(struct foo bar[static 1])
> > > > syntax to tell the compiler we don't accept NULL pointers?
> > > >
> > > > Hmm. Apparently that has the same problem as using any
> > > > other kind of array syntax in the prototype. That is,
> > > > the compiler demands to know the definition of 'struct foo'
> > > > even though we're passing in effectively a pointer. Sigh.
> > >
> > > Honestly, I don't care as long as it's something we can unit-test to
> > > make sure we make it consistent. We can't unit test a complete kernel
> > > crash.
> >
> > Why do you want to put utterly broken code into a unit test?
>
> Utterly broken code happens. It probably shouldn't, but here we are.
>
> Anyway, you mostly missed the consistent part.
>
> The current state with it is:
>
> - planes:
> - drm_universal_plane_init warns if funcs->destroy NULL
> - drm_universal_plane_alloc errors out if funcs is NULL
> - drmm_universal_plane_alloc warns and errors out if funcs or funcs->destroy are NULL
>
> - CRTC:
> - drm_crtc_init_with_planes warns if funcs->destroy NULL
> - drmm_crtc_init_with_planes warns if funcs or funcs->destroy are NULL
> - drmm_crtc_alloc_with_planes warns and errors out if funcs or funcs->destroy are NULL
>
> - encoder:
> - drm_encoder_init warns if funcs->destroy NULL
> - drmm_encoder_init warns and errors out if funcs or funcs->destroy are NULL
> - drmm_encoder_alloc warns and errors out if funcs or funcs->destroy are NULL
>
> - connectors:
> - drm_connector_init warns and errors out if funcs or funcs->destroy are NULL
> - drm_connector_init_with_ddc warns and errors out if funcs or funcs->destroy are NULL
> - drmm_connector_init warns and errors out if funcs or funcs->destroy are NULL

Those are perhaps fine, as things may not oops immediately if you get
that wrong. But NULL checking things that will anyway oops immediately,
(and there's not chance the thing will do anything useful if you prevent
the oops with a NULL check) doesn't make any sense to me. It just makes
you doubt the entire universe when you see code like that.

>
> I think that just proves that your opinion is just not as clear cut as
> you'd like it to be, and it's far from being the policy you claim it is.
>
> Plus, we're not even remotely consistent there, and we're not
> documenting that anywhere.
>
> And we have plenty of other examples of static stuff being checked
> because it just makes sense. All variants of drm_crtc_init_with_planes
> will for example check that the correct plane type is associated to the
> primary and cursor planes.
>
> We should fix that.

Ideally the compiler should catch all of this. But given we are
implementing this in C (and even C23 constexpr was neutered beyond
uselessness) that's not really possible in any nice way :(

--
Ville Syrj?l?
Intel

2023-12-01 15:18:44

by Ville Syrjälä

[permalink] [raw]
Subject: Re: [PATCH v4 05/45] drm/connector: Check drm_connector_init pointers arguments

On Wed, Nov 29, 2023 at 12:25:37PM +0200, Ville Syrj?l? wrote:
> On Wed, Nov 29, 2023 at 12:12:59PM +0200, Pekka Paalanen wrote:
> > On Tue, 28 Nov 2023 15:49:08 +0200
> > Ville Syrj?l? <[email protected]> wrote:
> >
> > > Should we perhaps start to use the (arguably hideous)
> > > - void f(struct foo *bar)
> > > + void f(struct foo bar[static 1])
> > > syntax to tell the compiler we don't accept NULL pointers?
> > >
> > > Hmm. Apparently that has the same problem as using any
> > > other kind of array syntax in the prototype. That is,
> > > the compiler demands to know the definition of 'struct foo'
> > > even though we're passing in effectively a pointer. Sigh.
> >
> >
> > __attribute__((nonnull)) ?
>
> I guess that would work, though the syntax is horrible when
> you need to flag specific arguments.

I played around with this a bit (blindly cocci'd tons of
drm and i915 function declarations with the nonnull attribute)
and it's somewhat underwhelming unfortunately.

It will trip only if the compiler is 100% sure you're passing
in a NULL. There is no way to eg. tell the compiler that a
function can return a NULL and thus anything coming from it
should be checked by the caller before passing it on to
something with the nonnull attribute. And I suppose error
pointers would also screw that idea over anyway.

Additionally the NULL device checks being being done in
the drm_err/dbg macros trip this up left right and center.
And hiding that check inside a function (instead of having
it in the macro) is also ruined by the fact that we apparently
pass different types of pointers to these macros :( Generics
could be used to sort out that type mess I suppose, or the
code that passes the wrong type (DSI code at least) should
just be changed to not do that. But not sure if there's enough
benefit to warrant the work.

--
Ville Syrj?l?
Intel