Hi,
I have an external HDD (200G) in a case that has both FW and USB2 outputs.
FW work great since 2.6.2, connecting the USB to a machine running 2.4.23
instantly rebooted the machine, and in 2.6 (currently 2.6.5rc1bk2) it
doesn't work either:
I tried on a 3 year old P3-700 laptop with an Intel 8327something chipset,
and on a new P4 with a
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 02)
chipset. Both don't work and both show the same behaviour.
Is this a problem in the USB controller, or the hardware, or Linux? The HDD
works with Windows XP on the Laptop.
This is detected during boot on the P4:
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
PCI: Enabling device 0000:00:1d.7 (0004 -> 0006)
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB USB2
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2
ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit
addr
ehci_hcd 0000:00:1d.7: capability 0001 at 68
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem e19da000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024
Reset HALT
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024
RUN
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
ehci_hcd 0000:00:1d.7: root hub device address 1
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID 0x409
usb usb1: Product: Intel Corp. 82801DB USB2
usb usb1: Manufacturer: Linux 2.6.5-rc1-bk2-p3 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
drivers/usb/core/usb.c: usb_hotplug
usb usb1: registering 1-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: ganged power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times
hub 1-0:1.0: Port indicators are not supported
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: hub controller current requirement: 0mA
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: enabling power on all ports
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB USB (Hub #1)
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 0000b800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: root hub device address 1
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID 0x409
usb usb2: Product: Intel Corp. 82801DB USB (Hub #1)
usb usb2: Manufacturer: Linux 2.6.5-rc1-bk2-p3 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
drivers/usb/core/usb.c: usb_hotplug
usb usb2: registering 2-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: unknown reserved power switching mode
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: Port indicators are not supported
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: hub controller current requirement: 0mA
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: enabling power on all ports
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 0000b400
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: root hub device address 1
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID 0x409
usb usb3: Product: Intel Corp. 82801DB USB (Hub #2)
usb usb3: Manufacturer: Linux 2.6.5-rc1-bk2-p3 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
drivers/usb/core/usb.c: usb_hotplug
usb usb3: registering 3-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: unknown reserved power switching mode
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: Port indicators are not supported
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: hub controller current requirement: 0mA
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: enabling power on all ports
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB USB (Hub #3)
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 0000b000
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: root hub device address 1
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID 0x409
usb usb4: Product: Intel Corp. 82801DB USB (Hub #3)
usb usb4: Manufacturer: Linux 2.6.5-rc1-bk2-p3 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
drivers/usb/core/usb.c: usb_hotplug
usb usb4: registering 4-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: unknown reserved power switching mode
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: Port indicators are not supported
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: hub controller current requirement: 0mA
hub 4-0:1.0: local power source is good
hub 4-0:1.0: no over-current condition exists
hub 4-0:1.0: enabling power on all ports
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 304 bytes per
conntrack
uhci_hcd 0000:00:1d.0: suspend_hc
uhci_hcd 0000:00:1d.1: suspend_hc
uhci_hcd 0000:00:1d.2: suspend_hc
Both are Debian unstable systems, fairly up to date, with
Linux get1431p4 2.6.5-rc1-bk2-p3 #1 SMP Wed Mar 17 18:01:26 CET 2004 i686
GNU/Linux
Gnu C 3.3.3
Gnu make 3.80
binutils 2.14.90.0.7
util-linux 2.12
mount 2.12
module-init-tools permitted
e2fsprogs 1.35-WIP
quota-tools 3.11.
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.15
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0.91
This is what I get in the syslog of the P4, as soon as I load
"sd_mod" (usb-storage and scsi_mod are loaded by hotplug automatically and
they work):
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC
CONNECT
hub 1-0:1.0: port 3, status 501, change 1, 480 Mb/s
hub 1-0:1.0: debounce: port 3: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:1d.7: port 3 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE
CONNECT
usb 1-3: new high speed USB device using address 2
usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=0
drivers/usb/core/message.c: USB device number 2 default language ID 0x409
usb 1-3: Product: Mass Storage Device
usb 1-3: Manufacturer: Prolific Technology Inc.
drivers/usb/core/usb.c: usb_hotplug
usb 1-3: registering 1-3:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
Initializing USB Mass Storage driver...
usb-storage 1-3:1.0: usb_probe_interface
usb-storage 1-3:1.0: usb_probe_interface - got id
usb-storage: USB Mass Storage device detected
usb-storage: altsetting is 0, id_index is 118
usb-storage: -- associate_dev
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: Endpoints: In: 0xd6924f58 Out: 0xd6924f44 Int: 0x00000000
(Period 0)
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00
len=1
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: Maxtor 6 Model: Y200P0 Rev: YAR4
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: queuecommand called
usb-storage: *** thread sleeping.
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage: 25 00 00 00 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
SCSI device sda: 398297089 512-byte hdwr sectors (203928 MB)
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand called
usb-storage: *** thread sleeping.
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 00 00 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0x4 L 4096 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
usb-storage: Status code 0; transferred 4096/4096
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 17 bd 88 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x5 L 512 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
usb-storage: Status code -32; transferred 0/512
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82
len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x5 R 512 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: -- unexpectedly short transfer
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000005 L 18 F 128 Trg 0 LUN 0
CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000005 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 17 bd 88 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x6 L 512 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
usb-storage: Status code -32; transferred 0/512
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82
len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x6 R 512 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: -- unexpectedly short transfer
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000006 L 18 F 128 Trg 0 LUN 0
CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000006 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 17 bd 88 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x7 L 512 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
usb-storage: Status code -32; transferred 0/512
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82
len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x7 R 512 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: -- unexpectedly short transfer
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000007 L 18 F 128 Trg 0 LUN 0
CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000007 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 17 bd 88 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x8 L 512 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
usb-storage: Status code -32; transferred 0/512
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82
len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x8 R 512 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: -- unexpectedly short transfer
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000008 L 18 F 128 Trg 0 LUN 0
CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000008 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 17 bd 88 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x9 L 512 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
usb-storage: Status code -32; transferred 0/512
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82
len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x9 R 512 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: -- unexpectedly short transfer
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000009 L 18 F 128 Trg 0 LUN 0
CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000009 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 17 bd 88 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0xa L 512 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
usb-storage: Status code -32; transferred 0/512
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82
len=0
usb-storage: usb_stor_clear_halt: result = 0
etc etc etc etc ............... as long as the harddisk is on, or connected.
Thank you!
--
Jens Benecke (jens at spamfreemail.de)
http://www.hitchhikers.de - Europaweite kostenlose Mitfahrzentrale
http://www.spamfreemail.de - 100% saubere Postf?cher - garantiert!
http://www.rb-hosting.de - PHP ab 9? - SSH ab 19? - g?nstiger Traffic
.
Please DO NOT CC: me, I read the lists and newsgroups I post in!