EFI_MEMORY_ATTRIBUTE_PROTOCOL servers as a better alternative to
DXE services for setting memory attributes in EFI Boot Services
environment. This protocol is better since it is a part of UEFI
specification itself and not UEFI PI specification like DXE
services.
Add EFI_MEMORY_ATTRIBUTE_PROTOCOL definitions.
Support mixed mode properly for its calls.
Tested-by: Mario Limonciello <[email protected]>
Signed-off-by: Evgeniy Baskov <[email protected]>
---
arch/x86/include/asm/efi.h | 7 +++++++
drivers/firmware/efi/libstub/efistub.h | 22 ++++++++++++++++++++++
include/linux/efi.h | 1 +
3 files changed, 30 insertions(+)
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 233ae6986d6f..522ff2e443b3 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -325,6 +325,13 @@ static inline u32 efi64_convert_status(efi_status_t status)
#define __efi64_argmap_set_memory_space_attributes(phys, size, flags) \
(__efi64_split(phys), __efi64_split(size), __efi64_split(flags))
+/* Memory Attribute Protocol */
+#define __efi64_argmap_set_memory_attributes(protocol, phys, size, flags) \
+ ((protocol), __efi64_split(phys), __efi64_split(size), __efi64_split(flags))
+
+#define __efi64_argmap_clear_memory_attributes(protocol, phys, size, flags) \
+ ((protocol), __efi64_split(phys), __efi64_split(size), __efi64_split(flags))
+
/*
* The macros below handle the plumbing for the argument mapping. To add a
* mapping for a specific EFI method, simply define a macro
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index c74ac2875e31..343cae662bec 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -39,6 +39,9 @@ extern const efi_system_table_t *efi_system_table;
typedef union efi_dxe_services_table efi_dxe_services_table_t;
extern const efi_dxe_services_table_t *efi_dxe_table;
+typedef union efi_memory_attribute_protocol efi_memory_attribute_protocol_t;
+extern efi_memory_attribute_protocol_t *efi_mem_attrib_proto;
+
efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
efi_system_table_t *sys_table_arg);
@@ -415,6 +418,25 @@ union efi_dxe_services_table {
} mixed_mode;
};
+union efi_memory_attribute_protocol {
+ struct {
+ void *get_memory_attributes;
+ efi_status_t (__efiapi *set_memory_attributes)(efi_memory_attribute_protocol_t *,
+ efi_physical_addr_t,
+ u64,
+ u64);
+ efi_status_t (__efiapi *clear_memory_attributes)(efi_memory_attribute_protocol_t *,
+ efi_physical_addr_t,
+ u64,
+ u64);
+ };
+ struct {
+ u32 get_memory_attributes;
+ u32 set_memory_attributes;
+ u32 clear_memory_attributes;
+ } mixed_mode;
+};
+
typedef union efi_uga_draw_protocol efi_uga_draw_protocol_t;
union efi_uga_draw_protocol {
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 7603fc58c47c..5f880e8f96bd 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -390,6 +390,7 @@ void efi_native_runtime_setup(void);
#define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
#define EFI_DXE_SERVICES_TABLE_GUID EFI_GUID(0x05ad34ba, 0x6f02, 0x4214, 0x95, 0x2e, 0x4d, 0xa0, 0x39, 0x8e, 0x2b, 0xb9)
#define EFI_SMBIOS_PROTOCOL_GUID EFI_GUID(0x03583ff6, 0xcb36, 0x4940, 0x94, 0x7e, 0xb9, 0xb3, 0x9f, 0x4a, 0xfa, 0xf7)
+#define EFI_MEMORY_ATTRIBUTE_PROTOCOL_GUID EFI_GUID(0xf4560cf6, 0x40ec, 0x4b4a, 0xa1, 0x92, 0xbf, 0x1d, 0x57, 0xd0, 0xb1, 0x89)
#define EFI_IMAGE_SECURITY_DATABASE_GUID EFI_GUID(0xd719b2cb, 0x3d3a, 0x4596, 0xa3, 0xbc, 0xda, 0xd0, 0x0e, 0x67, 0x65, 0x6f)
#define EFI_SHIM_LOCK_GUID EFI_GUID(0x605dab50, 0xe046, 0x4300, 0xab, 0xb6, 0x3d, 0xd8, 0x10, 0xdd, 0x8b, 0x23)
--
2.37.4
On Tue, 22 Nov 2022 at 12:14, Evgeniy Baskov <[email protected]> wrote:
>
> EFI_MEMORY_ATTRIBUTE_PROTOCOL servers as a better alternative to
> DXE services for setting memory attributes in EFI Boot Services
> environment. This protocol is better since it is a part of UEFI
> specification itself and not UEFI PI specification like DXE
> services.
>
> Add EFI_MEMORY_ATTRIBUTE_PROTOCOL definitions.
> Support mixed mode properly for its calls.
>
> Tested-by: Mario Limonciello <[email protected]>
> Signed-off-by: Evgeniy Baskov <[email protected]>
I have fixed up just this patch, as there is another user for the
protocol in zboot.
> ---
> arch/x86/include/asm/efi.h | 7 +++++++
> drivers/firmware/efi/libstub/efistub.h | 22 ++++++++++++++++++++++
> include/linux/efi.h | 1 +
> 3 files changed, 30 insertions(+)
>
> diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
> index 233ae6986d6f..522ff2e443b3 100644
> --- a/arch/x86/include/asm/efi.h
> +++ b/arch/x86/include/asm/efi.h
> @@ -325,6 +325,13 @@ static inline u32 efi64_convert_status(efi_status_t status)
> #define __efi64_argmap_set_memory_space_attributes(phys, size, flags) \
> (__efi64_split(phys), __efi64_split(size), __efi64_split(flags))
>
> +/* Memory Attribute Protocol */
> +#define __efi64_argmap_set_memory_attributes(protocol, phys, size, flags) \
> + ((protocol), __efi64_split(phys), __efi64_split(size), __efi64_split(flags))
> +
> +#define __efi64_argmap_clear_memory_attributes(protocol, phys, size, flags) \
> + ((protocol), __efi64_split(phys), __efi64_split(size), __efi64_split(flags))
> +
> /*
> * The macros below handle the plumbing for the argument mapping. To add a
> * mapping for a specific EFI method, simply define a macro
> diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
> index c74ac2875e31..343cae662bec 100644
> --- a/drivers/firmware/efi/libstub/efistub.h
> +++ b/drivers/firmware/efi/libstub/efistub.h
> @@ -39,6 +39,9 @@ extern const efi_system_table_t *efi_system_table;
> typedef union efi_dxe_services_table efi_dxe_services_table_t;
> extern const efi_dxe_services_table_t *efi_dxe_table;
>
> +typedef union efi_memory_attribute_protocol efi_memory_attribute_protocol_t;
> +extern efi_memory_attribute_protocol_t *efi_mem_attrib_proto;
> +
> efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
> efi_system_table_t *sys_table_arg);
>
> @@ -415,6 +418,25 @@ union efi_dxe_services_table {
> } mixed_mode;
> };
>
> +union efi_memory_attribute_protocol {
> + struct {
> + void *get_memory_attributes;
> + efi_status_t (__efiapi *set_memory_attributes)(efi_memory_attribute_protocol_t *,
> + efi_physical_addr_t,
> + u64,
> + u64);
> + efi_status_t (__efiapi *clear_memory_attributes)(efi_memory_attribute_protocol_t *,
> + efi_physical_addr_t,
> + u64,
> + u64);
> + };
> + struct {
> + u32 get_memory_attributes;
> + u32 set_memory_attributes;
> + u32 clear_memory_attributes;
> + } mixed_mode;
> +};
> +
> typedef union efi_uga_draw_protocol efi_uga_draw_protocol_t;
>
> union efi_uga_draw_protocol {
> diff --git a/include/linux/efi.h b/include/linux/efi.h
> index 7603fc58c47c..5f880e8f96bd 100644
> --- a/include/linux/efi.h
> +++ b/include/linux/efi.h
> @@ -390,6 +390,7 @@ void efi_native_runtime_setup(void);
> #define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
> #define EFI_DXE_SERVICES_TABLE_GUID EFI_GUID(0x05ad34ba, 0x6f02, 0x4214, 0x95, 0x2e, 0x4d, 0xa0, 0x39, 0x8e, 0x2b, 0xb9)
> #define EFI_SMBIOS_PROTOCOL_GUID EFI_GUID(0x03583ff6, 0xcb36, 0x4940, 0x94, 0x7e, 0xb9, 0xb3, 0x9f, 0x4a, 0xfa, 0xf7)
> +#define EFI_MEMORY_ATTRIBUTE_PROTOCOL_GUID EFI_GUID(0xf4560cf6, 0x40ec, 0x4b4a, 0xa1, 0x92, 0xbf, 0x1d, 0x57, 0xd0, 0xb1, 0x89)
>
> #define EFI_IMAGE_SECURITY_DATABASE_GUID EFI_GUID(0xd719b2cb, 0x3d3a, 0x4596, 0xa3, 0xbc, 0xda, 0xd0, 0x0e, 0x67, 0x65, 0x6f)
> #define EFI_SHIM_LOCK_GUID EFI_GUID(0x605dab50, 0xe046, 0x4300, 0xab, 0xb6, 0x3d, 0xd8, 0x10, 0xdd, 0x8b, 0x23)
> --
> 2.37.4
>
On 2023-01-31 11:37, Ard Biesheuvel wrote:
> On Tue, 22 Nov 2022 at 12:14, Evgeniy Baskov <[email protected]> wrote:
>>
>> EFI_MEMORY_ATTRIBUTE_PROTOCOL servers as a better alternative to
>> DXE services for setting memory attributes in EFI Boot Services
>> environment. This protocol is better since it is a part of UEFI
>> specification itself and not UEFI PI specification like DXE
>> services.
>>
>> Add EFI_MEMORY_ATTRIBUTE_PROTOCOL definitions.
>> Support mixed mode properly for its calls.
>>
>> Tested-by: Mario Limonciello <[email protected]>
>> Signed-off-by: Evgeniy Baskov <[email protected]>
>
> I have fixed up just this patch, as there is another user for the
> protocol in zboot.
>
One patch less in the patch set then, thanks!
On Tue, 31 Jan 2023 at 11:00, Evgeniy Baskov <[email protected]> wrote:
>
> On 2023-01-31 11:37, Ard Biesheuvel wrote:
> > On Tue, 22 Nov 2022 at 12:14, Evgeniy Baskov <[email protected]> wrote:
> >>
> >> EFI_MEMORY_ATTRIBUTE_PROTOCOL servers as a better alternative to
> >> DXE services for setting memory attributes in EFI Boot Services
> >> environment. This protocol is better since it is a part of UEFI
> >> specification itself and not UEFI PI specification like DXE
> >> services.
> >>
> >> Add EFI_MEMORY_ATTRIBUTE_PROTOCOL definitions.
> >> Support mixed mode properly for its calls.
> >>
> >> Tested-by: Mario Limonciello <[email protected]>
> >> Signed-off-by: Evgeniy Baskov <[email protected]>
> >
> > I have fixed up just this patch, as there is another user for the
> > protocol in zboot.
> >
>
> One patch less in the patch set then, thanks!
I meant queued up not fixed up, but you get my point :-)