2023-02-12 12:16:43

by Janne Grunau

Subject: [PATCH v2 4/4] nios2: dts: Fix tse_mac "max-frame-size" property

The given value of 1518 seems to refer to the layer 2 ethernet frame
size without 802.1Q tag. Actual use of the "max-frame-size" including in
the consumer of the "altr,tse-1.0" compatible is the MTU.

Fixes: 95acd4c7b69c ("nios2: Device tree support")
Fixes: 61c610ec61bb ("nios2: Add Max10 device tree")
Signed-off-by: Janne Grunau <[email protected]>
---
arch/nios2/boot/dts/10m50_devboard.dts | 2 +-
arch/nios2/boot/dts/3c120_devboard.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/nios2/boot/dts/10m50_devboard.dts b/arch/nios2/boot/dts/10m50_devboard.dts
index 56339bef3247..0e7e5b0dd685 100644
--- a/arch/nios2/boot/dts/10m50_devboard.dts
+++ b/arch/nios2/boot/dts/10m50_devboard.dts
@@ -97,7 +97,7 @@ rgmii_0_eth_tse_0: ethernet@400 {
rx-fifo-depth = <8192>;
tx-fifo-depth = <8192>;
address-bits = <48>;
- max-frame-size = <1518>;
+ max-frame-size = <1500>;
local-mac-address = [00 00 00 00 00 00];
altr,has-supplementary-unicast;
altr,enable-sup-addr = <1>;
diff --git a/arch/nios2/boot/dts/3c120_devboard.dts b/arch/nios2/boot/dts/3c120_devboard.dts
index d10fb81686c7..3ee316906379 100644
--- a/arch/nios2/boot/dts/3c120_devboard.dts
+++ b/arch/nios2/boot/dts/3c120_devboard.dts
@@ -106,7 +106,7 @@ tse_mac: ethernet@4000 {
interrupt-names = "rx_irq", "tx_irq";
rx-fifo-depth = <8192>;
tx-fifo-depth = <8192>;
- max-frame-size = <1518>;
+ max-frame-size = <1500>;
local-mac-address = [ 00 00 00 00 00 00 ];
phy-mode = "rgmii-id";
phy-handle = <&phy0>;

--
2.39.1

2023-02-16 15:54:12

by Dinh Nguyen

Subject: Re: [PATCH v2 4/4] nios2: dts: Fix tse_mac "max-frame-size" property

On 2/12/23 06:16, Janne Grunau wrote:
> The given value of 1518 seems to refer to the layer 2 ethernet frame
> size without 802.1Q tag. Actual use of the "max-frame-size" including in
> the consumer of the "altr,tse-1.0" compatible is the MTU.
>
> Fixes: 95acd4c7b69c ("nios2: Device tree support")
> Fixes: 61c610ec61bb ("nios2: Add Max10 device tree")
> Signed-off-by: Janne Grunau <[email protected]>
> ---
> arch/nios2/boot/dts/10m50_devboard.dts | 2 +-
> arch/nios2/boot/dts/3c120_devboard.dts | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/nios2/boot/dts/10m50_devboard.dts b/arch/nios2/boot/dts/10m50_devboard.dts
> index 56339bef3247..0e7e5b0dd685 100644
> --- a/arch/nios2/boot/dts/10m50_devboard.dts
> +++ b/arch/nios2/boot/dts/10m50_devboard.dts
> @@ -97,7 +97,7 @@ rgmii_0_eth_tse_0: ethernet@400 {
> rx-fifo-depth = <8192>;
> tx-fifo-depth = <8192>;
> address-bits = <48>;
> - max-frame-size = <1518>;
> + max-frame-size = <1500>;
> local-mac-address = [00 00 00 00 00 00];
> altr,has-supplementary-unicast;
> altr,enable-sup-addr = <1>;
> diff --git a/arch/nios2/boot/dts/3c120_devboard.dts b/arch/nios2/boot/dts/3c120_devboard.dts
> index d10fb81686c7..3ee316906379 100644
> --- a/arch/nios2/boot/dts/3c120_devboard.dts
> +++ b/arch/nios2/boot/dts/3c120_devboard.dts
> @@ -106,7 +106,7 @@ tse_mac: ethernet@4000 {
> interrupt-names = "rx_irq", "tx_irq";
> rx-fifo-depth = <8192>;
> tx-fifo-depth = <8192>;
> - max-frame-size = <1518>;
> + max-frame-size = <1500>;
> local-mac-address = [ 00 00 00 00 00 00 ];
> phy-mode = "rgmii-id";
> phy-handle = <&phy0>;
>

Applied!

Thanks,
Dinh