In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
in between the mac address and the ether type (should use
'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
b53 switch.
Since the Cygnus was added with the BCM58XX device id and the
BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
broken, due to the incorrect brcm tag location.
Add a new b53 device id (BCM583XX) for Cygnus family to fix the
issue. Add the new device id to the BCM58XX family as Cygnus
is similar to the BCM58XX in most other functionalities.
Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")
Signed-off-by: Arun Parameswaran <[email protected]>
---
drivers/net/dsa/b53/b53_common.c | 15 ++++++++++++++-
drivers/net/dsa/b53/b53_priv.h | 2 ++
drivers/net/dsa/b53/b53_srab.c | 4 ++--
3 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3da5fca..bbc6cc6 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -684,7 +684,8 @@ static int b53_switch_reset(struct b53_device *dev)
* still use this driver as a library and need to perform the reset
* earlier.
*/
- if (dev->chip_id == BCM58XX_DEVICE_ID) {
+ if (dev->chip_id == BCM58XX_DEVICE_ID ||
+ dev->chip_id == BCM583XX_DEVICE_ID) {
b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
reg |= SW_RST | EN_SW_RST | EN_CH_RST;
b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
@@ -1880,6 +1881,18 @@ struct b53_chip_data {
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
+ .chip_id = BCM583XX_DEVICE_ID,
+ .dev_name = "BCM583xx/11360",
+ .vlans = 4096,
+ .enabled_ports = 0x103,
+ .arl_entries = 4,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
.chip_id = BCM7445_DEVICE_ID,
.dev_name = "BCM7445",
.vlans = 4096,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 3b57f47..b232aaa 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -62,6 +62,7 @@ enum {
BCM53018_DEVICE_ID = 0x53018,
BCM53019_DEVICE_ID = 0x53019,
BCM58XX_DEVICE_ID = 0x5800,
+ BCM583XX_DEVICE_ID = 0x58300,
BCM7445_DEVICE_ID = 0x7445,
BCM7278_DEVICE_ID = 0x7278,
};
@@ -181,6 +182,7 @@ static inline int is5301x(struct b53_device *dev)
static inline int is58xx(struct b53_device *dev)
{
return dev->chip_id == BCM58XX_DEVICE_ID ||
+ dev->chip_id == BCM583XX_DEVICE_ID ||
dev->chip_id == BCM7445_DEVICE_ID ||
dev->chip_id == BCM7278_DEVICE_ID;
}
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index c37ffd1..8247481 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -364,7 +364,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
{ .compatible = "brcm,bcm53018-srab" },
{ .compatible = "brcm,bcm53019-srab" },
{ .compatible = "brcm,bcm5301x-srab" },
- { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID },
{ .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
@@ -372,7 +372,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
{ .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
- { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
{ .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ /* sentinel */ },
};
--
1.9.1
Clement,
Please test this works for your issue.
On 18-06-05 01:38 PM, Arun Parameswaran wrote:
> In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
> in between the mac address and the ether type (should use
> 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
> b53 switch.
>
> Since the Cygnus was added with the BCM58XX device id and the
> BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
> broken, due to the incorrect brcm tag location.
>
> Add a new b53 device id (BCM583XX) for Cygnus family to fix the
> issue. Add the new device id to the BCM58XX family as Cygnus
> is similar to the BCM58XX in most other functionalities.
>
> Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")
>
> Signed-off-by: Arun Parameswaran <[email protected]>
Acked-by: Scott Branden <[email protected]>
> ---
> drivers/net/dsa/b53/b53_common.c | 15 ++++++++++++++-
> drivers/net/dsa/b53/b53_priv.h | 2 ++
> drivers/net/dsa/b53/b53_srab.c | 4 ++--
> 3 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
> index 3da5fca..bbc6cc6 100644
> --- a/drivers/net/dsa/b53/b53_common.c
> +++ b/drivers/net/dsa/b53/b53_common.c
> @@ -684,7 +684,8 @@ static int b53_switch_reset(struct b53_device *dev)
> * still use this driver as a library and need to perform the reset
> * earlier.
> */
> - if (dev->chip_id == BCM58XX_DEVICE_ID) {
> + if (dev->chip_id == BCM58XX_DEVICE_ID ||
> + dev->chip_id == BCM583XX_DEVICE_ID) {
> b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
> reg |= SW_RST | EN_SW_RST | EN_CH_RST;
> b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
> @@ -1880,6 +1881,18 @@ struct b53_chip_data {
> .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
> },
> {
> + .chip_id = BCM583XX_DEVICE_ID,
> + .dev_name = "BCM583xx/11360",
> + .vlans = 4096,
> + .enabled_ports = 0x103,
> + .arl_entries = 4,
> + .cpu_port = B53_CPU_PORT,
> + .vta_regs = B53_VTA_REGS,
> + .duplex_reg = B53_DUPLEX_STAT_GE,
> + .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
> + .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
> + },
> + {
> .chip_id = BCM7445_DEVICE_ID,
> .dev_name = "BCM7445",
> .vlans = 4096,
> diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
> index 3b57f47..b232aaa 100644
> --- a/drivers/net/dsa/b53/b53_priv.h
> +++ b/drivers/net/dsa/b53/b53_priv.h
> @@ -62,6 +62,7 @@ enum {
> BCM53018_DEVICE_ID = 0x53018,
> BCM53019_DEVICE_ID = 0x53019,
> BCM58XX_DEVICE_ID = 0x5800,
> + BCM583XX_DEVICE_ID = 0x58300,
> BCM7445_DEVICE_ID = 0x7445,
> BCM7278_DEVICE_ID = 0x7278,
> };
> @@ -181,6 +182,7 @@ static inline int is5301x(struct b53_device *dev)
> static inline int is58xx(struct b53_device *dev)
> {
> return dev->chip_id == BCM58XX_DEVICE_ID ||
> + dev->chip_id == BCM583XX_DEVICE_ID ||
> dev->chip_id == BCM7445_DEVICE_ID ||
> dev->chip_id == BCM7278_DEVICE_ID;
> }
> diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
> index c37ffd1..8247481 100644
> --- a/drivers/net/dsa/b53/b53_srab.c
> +++ b/drivers/net/dsa/b53/b53_srab.c
> @@ -364,7 +364,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
> { .compatible = "brcm,bcm53018-srab" },
> { .compatible = "brcm,bcm53019-srab" },
> { .compatible = "brcm,bcm5301x-srab" },
> - { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
> + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID },
> { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
> @@ -372,7 +372,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
> { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
> - { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
> + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
> { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { /* sentinel */ },
> };
On 06/05/2018 01:38 PM, Arun Parameswaran wrote:
> In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
> in between the mac address and the ether type (should use
> 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
> b53 switch.
>
> Since the Cygnus was added with the BCM58XX device id and the
> BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
> broken, due to the incorrect brcm tag location.
>
> Add a new b53 device id (BCM583XX) for Cygnus family to fix the
> issue. Add the new device id to the BCM58XX family as Cygnus
> is similar to the BCM58XX in most other functionalities.
>
> Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")
>
> Signed-off-by: Arun Parameswaran <[email protected]>
Clement originally reported this to me/us:
Reported-by: Clément Péron <[email protected]>
I completely overlooked that when adding support for prepended Broadcom
tags, thanks for the fix Arun!
Reviewed-by: Florian Fainelli <[email protected]>
David, can you also queue this up for -stable? Thank you
> ---
> drivers/net/dsa/b53/b53_common.c | 15 ++++++++++++++-
> drivers/net/dsa/b53/b53_priv.h | 2 ++
> drivers/net/dsa/b53/b53_srab.c | 4 ++--
> 3 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
> index 3da5fca..bbc6cc6 100644
> --- a/drivers/net/dsa/b53/b53_common.c
> +++ b/drivers/net/dsa/b53/b53_common.c
> @@ -684,7 +684,8 @@ static int b53_switch_reset(struct b53_device *dev)
> * still use this driver as a library and need to perform the reset
> * earlier.
> */
> - if (dev->chip_id == BCM58XX_DEVICE_ID) {
> + if (dev->chip_id == BCM58XX_DEVICE_ID ||
> + dev->chip_id == BCM583XX_DEVICE_ID) {
> b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
> reg |= SW_RST | EN_SW_RST | EN_CH_RST;
> b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
> @@ -1880,6 +1881,18 @@ struct b53_chip_data {
> .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
> },
> {
> + .chip_id = BCM583XX_DEVICE_ID,
> + .dev_name = "BCM583xx/11360",
> + .vlans = 4096,
> + .enabled_ports = 0x103,
> + .arl_entries = 4,
> + .cpu_port = B53_CPU_PORT,
> + .vta_regs = B53_VTA_REGS,
> + .duplex_reg = B53_DUPLEX_STAT_GE,
> + .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
> + .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
> + },
> + {
> .chip_id = BCM7445_DEVICE_ID,
> .dev_name = "BCM7445",
> .vlans = 4096,
> diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
> index 3b57f47..b232aaa 100644
> --- a/drivers/net/dsa/b53/b53_priv.h
> +++ b/drivers/net/dsa/b53/b53_priv.h
> @@ -62,6 +62,7 @@ enum {
> BCM53018_DEVICE_ID = 0x53018,
> BCM53019_DEVICE_ID = 0x53019,
> BCM58XX_DEVICE_ID = 0x5800,
> + BCM583XX_DEVICE_ID = 0x58300,
> BCM7445_DEVICE_ID = 0x7445,
> BCM7278_DEVICE_ID = 0x7278,
> };
> @@ -181,6 +182,7 @@ static inline int is5301x(struct b53_device *dev)
> static inline int is58xx(struct b53_device *dev)
> {
> return dev->chip_id == BCM58XX_DEVICE_ID ||
> + dev->chip_id == BCM583XX_DEVICE_ID ||
> dev->chip_id == BCM7445_DEVICE_ID ||
> dev->chip_id == BCM7278_DEVICE_ID;
> }
> diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
> index c37ffd1..8247481 100644
> --- a/drivers/net/dsa/b53/b53_srab.c
> +++ b/drivers/net/dsa/b53/b53_srab.c
> @@ -364,7 +364,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
> { .compatible = "brcm,bcm53018-srab" },
> { .compatible = "brcm,bcm53019-srab" },
> { .compatible = "brcm,bcm5301x-srab" },
> - { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
> + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID },
> { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
> @@ -372,7 +372,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
> { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
> - { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
> + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
> { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { /* sentinel */ },
> };
>
--
Florian
Hi Scott,
On Tue, 5 Jun 2018 at 22:55, Scott Branden <[email protected]> wrote:
>
> Clement,
>
> Please test this works for your issue.
Tested on top of 4.17.0 with a BCM58305
Tested-by: Clément Péron <[email protected]>
>
>
> On 18-06-05 01:38 PM, Arun Parameswaran wrote:
> > In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
> > in between the mac address and the ether type (should use
> > 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
> > b53 switch.
> >
> > Since the Cygnus was added with the BCM58XX device id and the
> > BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
> > broken, due to the incorrect brcm tag location.
> >
> > Add a new b53 device id (BCM583XX) for Cygnus family to fix the
> > issue. Add the new device id to the BCM58XX family as Cygnus
> > is similar to the BCM58XX in most other functionalities.
> >
> > Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")
> >
> > Signed-off-by: Arun Parameswaran <[email protected]>
> Acked-by: Scott Branden <[email protected]>
> > ---
> > drivers/net/dsa/b53/b53_common.c | 15 ++++++++++++++-
> > drivers/net/dsa/b53/b53_priv.h | 2 ++
> > drivers/net/dsa/b53/b53_srab.c | 4 ++--
> > 3 files changed, 18 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
> > index 3da5fca..bbc6cc6 100644
> > --- a/drivers/net/dsa/b53/b53_common.c
> > +++ b/drivers/net/dsa/b53/b53_common.c
> > @@ -684,7 +684,8 @@ static int b53_switch_reset(struct b53_device *dev)
> > * still use this driver as a library and need to perform the reset
> > * earlier.
> > */
> > - if (dev->chip_id == BCM58XX_DEVICE_ID) {
> > + if (dev->chip_id == BCM58XX_DEVICE_ID ||
> > + dev->chip_id == BCM583XX_DEVICE_ID) {
> > b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
> > reg |= SW_RST | EN_SW_RST | EN_CH_RST;
> > b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
> > @@ -1880,6 +1881,18 @@ struct b53_chip_data {
> > .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
> > },
> > {
> > + .chip_id = BCM583XX_DEVICE_ID,
> > + .dev_name = "BCM583xx/11360",
> > + .vlans = 4096,
> > + .enabled_ports = 0x103,
> > + .arl_entries = 4,
> > + .cpu_port = B53_CPU_PORT,
> > + .vta_regs = B53_VTA_REGS,
> > + .duplex_reg = B53_DUPLEX_STAT_GE,
> > + .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
> > + .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
> > + },
> > + {
> > .chip_id = BCM7445_DEVICE_ID,
> > .dev_name = "BCM7445",
> > .vlans = 4096,
> > diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
> > index 3b57f47..b232aaa 100644
> > --- a/drivers/net/dsa/b53/b53_priv.h
> > +++ b/drivers/net/dsa/b53/b53_priv.h
> > @@ -62,6 +62,7 @@ enum {
> > BCM53018_DEVICE_ID = 0x53018,
> > BCM53019_DEVICE_ID = 0x53019,
> > BCM58XX_DEVICE_ID = 0x5800,
> > + BCM583XX_DEVICE_ID = 0x58300,
> > BCM7445_DEVICE_ID = 0x7445,
> > BCM7278_DEVICE_ID = 0x7278,
> > };
> > @@ -181,6 +182,7 @@ static inline int is5301x(struct b53_device *dev)
> > static inline int is58xx(struct b53_device *dev)
> > {
> > return dev->chip_id == BCM58XX_DEVICE_ID ||
> > + dev->chip_id == BCM583XX_DEVICE_ID ||
> > dev->chip_id == BCM7445_DEVICE_ID ||
> > dev->chip_id == BCM7278_DEVICE_ID;
> > }
> > diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
> > index c37ffd1..8247481 100644
> > --- a/drivers/net/dsa/b53/b53_srab.c
> > +++ b/drivers/net/dsa/b53/b53_srab.c
> > @@ -364,7 +364,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
> > { .compatible = "brcm,bcm53018-srab" },
> > { .compatible = "brcm,bcm53019-srab" },
> > { .compatible = "brcm,bcm5301x-srab" },
> > - { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
> > + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID },
> > { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
> > { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
> > { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
> > @@ -372,7 +372,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
> > { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
> > { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
> > { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
> > - { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
> > + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
> > { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
> > { /* sentinel */ },
> > };
>
From: Florian Fainelli <[email protected]>
Date: Tue, 5 Jun 2018 14:41:41 -0700
> On 06/05/2018 01:38 PM, Arun Parameswaran wrote:
>> In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
>> in between the mac address and the ether type (should use
>> 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
>> b53 switch.
>>
>> Since the Cygnus was added with the BCM58XX device id and the
>> BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
>> broken, due to the incorrect brcm tag location.
>>
>> Add a new b53 device id (BCM583XX) for Cygnus family to fix the
>> issue. Add the new device id to the BCM58XX family as Cygnus
>> is similar to the BCM58XX in most other functionalities.
>>
>> Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")
>>
>> Signed-off-by: Arun Parameswaran <[email protected]>
>
> Clement originally reported this to me/us:
>
> Reported-by: Cl?ment P?ron <[email protected]>
>
> I completely overlooked that when adding support for prepended Broadcom
> tags, thanks for the fix Arun!
>
> Reviewed-by: Florian Fainelli <[email protected]>
>
> David, can you also queue this up for -stable? Thank you
Applied and queued up for -stable, thanks everyone.