2022-04-16 00:44:09

by Peilin Ye

[permalink] [raw]
Subject: [PATCH v2 net 1/2] ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit()

From: Peilin Ye <[email protected]>

Do not update tunnel->tun_hlen in data plane code. Use a local variable
instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit().

Co-developed-by: Cong Wang <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Peilin Ye <[email protected]>
---
v1: https://lore.kernel.org/netdev/c5b7dc6020c93a1e7b40bc472fcdb6429999473e.1649715555.git.peilin.ye@bytedance.com

(no change since v1)

net/ipv6/ip6_gre.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index 8753e9cec326..b43a46449130 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -743,6 +743,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
struct ip_tunnel_info *tun_info;
const struct ip_tunnel_key *key;
__be16 flags;
+ int tun_hlen;

tun_info = skb_tunnel_info_txcheck(skb);
if (IS_ERR(tun_info) ||
@@ -760,9 +761,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
dsfield = key->tos;
flags = key->tun_flags &
(TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
- tunnel->tun_hlen = gre_calc_hlen(flags);
+ tun_hlen = gre_calc_hlen(flags);

- gre_build_header(skb, tunnel->tun_hlen,
+ gre_build_header(skb, tun_hlen,
flags, protocol,
tunnel_id_to_key32(tun_info->key.tun_id),
(flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
--
2.20.1


2022-04-16 01:10:21

by Peilin Ye

[permalink] [raw]
Subject: [PATCH v2 net 2/2] ip6_gre: Fix skb_under_panic in __gre6_xmit()

From: Peilin Ye <[email protected]>

Feng reported an skb_under_panic BUG triggered by running
test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh:

[ 82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11
<...>
[ 82.607380] Call Trace:
[ 82.609389] <TASK>
[ 82.611136] skb_push.cold.109+0x10/0x10
[ 82.614289] __gre6_xmit+0x41e/0x590
[ 82.617169] ip6gre_tunnel_xmit+0x344/0x3f0
[ 82.620526] dev_hard_start_xmit+0xf1/0x330
[ 82.623882] sch_direct_xmit+0xe4/0x250
[ 82.626961] __dev_queue_xmit+0x720/0xfe0
<...>
[ 82.633431] packet_sendmsg+0x96a/0x1cb0
[ 82.636568] sock_sendmsg+0x30/0x40
<...>

The following sequence of events caused the BUG:

1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is
calculated based on old flags (see ip6gre_calc_hlen());
2. packet_snd() reserves header room for skb A, assuming
tunnel->tun_hlen is 4;
3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for
skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel());
4. __gre6_xmit() detects the new tunnel key, and recalculates
"tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and
TUNNEL_SEQ);
5. gre_build_header() calls skb_push() with insufficient reserved header
room, triggering the BUG.

As sugguested by Cong, fix it by moving the call to skb_cow_head() after
the recalculation of tun_hlen.

Reproducer:

OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o

ip netns add at_ns0
ip link add veth0 type veth peer name veth1
ip link set veth0 netns at_ns0
ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip link set dev veth1 up mtu 1500
ip addr add dev veth1 172.16.1.200/24

ip netns exec at_ns0 ip addr add ::11/96 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip addr add dev veth1 ::22/96
ip link set dev veth1 up

ip netns exec at_ns0 \
ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \
local ::11 remote ::22

ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24
ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96
ip netns exec at_ns0 ip link set dev ip6gretap00 up

ip link add dev ip6gretap11 type ip6gretap external
ip addr add dev ip6gretap11 10.1.1.200/24
ip addr add dev ip6gretap11 fc80::200/24
ip link set dev ip6gretap11 up

tc qdisc add dev ip6gretap11 clsact
tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel
tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel

ping6 -c 3 -w 10 -q ::11

Fixes: 6712abc168eb ("ip6_gre: add ip6 gre and gretap collect_md mode")
Reported-by: Feng Zhou <[email protected]>
Co-developed-by: Cong Wang <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Peilin Ye <[email protected]>
---
v1: https://lore.kernel.org/netdev/9cd9ca4ac2c19be288cb8734a86eb30e4d9e2050.1649715555.git.peilin.ye@bytedance.com/

changes since v1:
- add a proper "Fixes:" tag (Jakub Kicinski)
- restructure commit message

net/ipv6/ip6_gre.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index b43a46449130..976236736146 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -733,9 +733,6 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
else
fl6->daddr = tunnel->parms.raddr;

- if (skb_cow_head(skb, dev->needed_headroom ?: tunnel->hlen))
- return -ENOMEM;
-
/* Push GRE header. */
protocol = (dev->type == ARPHRD_ETHER) ? htons(ETH_P_TEB) : proto;

@@ -763,6 +760,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
(TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
tun_hlen = gre_calc_hlen(flags);

+ if (skb_cow_head(skb, dev->needed_headroom ?: tun_hlen + tunnel->encap_hlen))
+ return -ENOMEM;
+
gre_build_header(skb, tun_hlen,
flags, protocol,
tunnel_id_to_key32(tun_info->key.tun_id),
@@ -773,6 +773,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
if (tunnel->parms.o_flags & TUNNEL_SEQ)
tunnel->o_seqno++;

+ if (skb_cow_head(skb, dev->needed_headroom ?: tunnel->hlen))
+ return -ENOMEM;
+
gre_build_header(skb, tunnel->tun_hlen, tunnel->parms.o_flags,
protocol, tunnel->parms.o_key,
htonl(tunnel->o_seqno));
--
2.20.1